Monolithic Capillary Columns Research Articles

Preparation of chiral metal organic framework modified silica monolithic capillary column and its application in enantioseparations of chiral drugs

Metal organic frameworks (MOFs) are crystalline compounds composed of metal ions (or metal clusters) and organic ligands. Chiral MOFs have been successfully utilized as novel materials for the separation of chiral enantiomers by chromatography, demonstrating excellent chiral separation performance. In this study, a chiral MOF-modified silica monolithic capillary column was used for pressurized capillary electrochromatography. First, a chiral MOF (Co-glycyl-L-glutamic acid, Co-L-GG) was synthesized. This MOF was then used to prepare a chiral capillary monolithic column via a one-step in situ polymerization method. The optimal conditions for preparing the chiral capillary monolithic column were determined as follows: Co-L-GG amount, 5 mg; polyethylene glycol amount, 0.96 mg; tetramethoxysilane dosage, 3.6 mL; trimethoxymethylsilane dosage, 0.4 mL. Next, the effects of the separation conditions on the separation of chiral drugs were investigated. Under the conditions of an applied voltage of -20 kV and a mobile phase consisting of acetonitrile and 20 mmol/L disodium hydrogen phosphate (80∶20, v/v), six chiral drugs were separated within 3 min, with baseline separation achieved for amlodipine, fluvastatin, and tryptophan. Moreover, the prepared chiral capillary monolithic column exhibited good reproducibility and stability. Finally, molecular docking studies were conducted using AutoDock to explore the chiral recognition mechanism, and the results were analyzed using Discovery Studio. The results indicated that larger differences in binding free energy between Co-L-GG and the enantiomers of the chiral drugs were correlated with higher enantioselectivity factors. However, this correlation did not necessarily lead to an increase in resolution. Co-L-GG, which is enriched with primary amines, secondary amines, and carbonyl groups, demonstrated enantiomeric recognition capability. In conclusion, this study demonstrates that chiral MOFs can be effectively used as chiral functional monomers to prepare chiral monolithic capillary columns, highlighting their significant potential for the separation and analysis of chiral compounds. The comprehensive exploration of the synthesis, characterization, and applications of these MOFs will help provide valuable insights into the development of advanced separation technologies.

Design and Implementation of a Proof-of-Concept Robotic-Microfluidic Interface to Bridge Spatial Comprehensive Three-Dimensional Liquid Chromatography with Mass Spectrometry.

A proof-of-concept system is presented for the hyphenation of spatial comprehensive three-dimensional liquid chromatography (3D-LC) to mass spectrometry (MS) detection via a robotic-microfluidic interface. A three-dimensional fractal microflow distributor, incorporating 16 parallel RP monolithic capillary columns arranged in a 4 × 4 configuration, was connected to an X-Y-Z robotic system. This setup facilitated the deposition of successive arrays of microdroplets onto an MS target plate. To minimize carryover during droplet deposition, a strategy was implemented in which the distance between the target plate and the capillary was gradually increased during the deposition process. System-level variation in travel time and subsequent flow rates across parallel columns was assessed and translated in retention alignment based on injection of a protein standard. The successful separation of intact proteins was demonstrated through a parallel 4 × 4 column configuration, applying MALDI-MS detection after microdroplet spotting on an MS target plate. Furthermore, the discussion encompasses high-throughput MS imaging detection within the framework of spatial 3D-LC.

Study of the Enantioselectivity and Recognition Mechanism of Allyl-β-CD Modified Organic Polymer Monolithic Capillary Column.

Allyl-β-CD was synthesized and used as the chiral functional monomer to prepare chiral organic polymer monolithic columns in capillary HPLC. First, the enantioselectivity of the prepared allyl-β-CD modified organic polymer monolithic capillary columns was investigated. Then, the influences of enantioseparation conditions of chiral drugs were further explored. Finally, the recognition mechanism was studied by molecular docking with AutoDock. Complete enantioseparations of four chiral drugs as well as partial enantioseparations of eight chiral drugs have been achieved. Results showed that the RSD values for run-to-run, day-to-day, and column-to-column variations ranged from 1.2% to 4.6%, 1.4% to 4.7%, and 2.0% to 6.1%, respectively. The enantioselectivity factor rather than resolution is correlated with the binding free energy difference between enantiomers with allyl-β-CD. Furthermore, the abundant ether bonds, hydroxyl groups, and hydrophobic cavities in cyclodextrin are responsible for the enantioseparation ability of the chiral monolithic capillary columns.

Construction of adamantane-based monolithic column with three-dimensionally porous structure for small molecules separation and biosample analysis

BackgroundThe fabrication technique of capillary column is the key to the development and application of capillary liquid chromatography (cLC) to improve separation efficiency for analytes. The capillary monolithic column possessed three-dimensionally connected porous or channel structures. Unique porous structure endows excellent permeability and high performance in diverse fields, especially in separation. Thereinto, organic monolithic columns have attracted widespread attention due to their advantages of simple preparation and excellent biocompatibility. However, their separation selectivity needs to be further developed and regulated to apply the separation of more diverse samples. ResultsA novel polymeric monolithic column was prepared via thermally initiated in situ copolymerization of 2-methyladamantan-2-yl acrylate (MADA) with ditrimethylolpropane tetraacrylate (DTTA) in fused silica. The prepared poly(MADA-co-DTTA) monolith showed adjustable permeability, developed porous structure and high thermal stability. Consequently, it exhibited excellent separation capability of small molecules (alkylbenzenes and polycyclic aromatic hydrocarbons). Especially, when acetonitrile/water (60/40, v/v) was used as the mobile phase, the theoretical plate numbers reached 84,000 plates m−1 for butylbenzene at a linear velocity of 0.5 mm s−1. Most importantly, the hydrophobicity of the poly(MADA-co-DTTA) monolithic column was regulated via host-guest interaction between adamantyl group and cucurbit [7]uril (CB[7]). Additionally, the poly(MADA-co-DTTA) monolith was further adopted for the analysis of the tryptic digest of proteins from HeLa by cLC-MS/MS. The 33,783 unique peptides and 5,299 proteins were identified on the monolith, which exhibited great separation ability for complex samples. Significance and noveltyDue to abundant pore structure and good chemical properties, the poly(MADA-co-DTTA) monolithic column exhibited high performance for the separations of small molecules and biological sample. Meanwhile, owing to the existence of adamantyl-group, CB[7] was immobilized on the poly(MADA-co-DTTA) monolithic column to fabricate poly(MADA-co-DTTA)-CB[7] by host-guest interaction. It is possible to adjust the surface chemistry of the monolithic materials to accommodate more complex analytes.

Chiral metal-organic frameworks grown in situ for monolithic capillary electrochromatographic enantioseparation.

Chiral metal-organic frameworks (CMOFs) with chiral selectivity are one of the high-quality stationary phases for capillary electrochromatography (CEC). However, there is a problem of unsatisfactory enantioseparation performance of capillary columns due to insufficient loading. In this work, a lamellar CMOF (Cu-TC) was grown in situ on the surface of the monolith in a capillary monolithic column to obtain a Cu-TC@monolithic column. The CEC system constructed based on the Cu-TC@monolithic column shows a satisfactory chiral separation performance. Compared with the Cu-TC-based coated column (Cu-TC@coated column), the enantioseparation performance of the CEC system based on the Cu-TC@monolithic column was greatly improved, and the resolutions (Rs) of the model analytes were increased by 80-500%. In addition, the effects of experimental conditions such as the number of cycles of Cu-TC in situ growth, buffer concentration, buffer pH, organic solvent addition and applied voltage on the performance of CEC were also investigated. Finally, the chiral selection mechanism of the stationary phase was explored by selective adsorption experiments. The present work provides a new idea for the development of capillary stationary phases, which has great potential considering the diversity of CMOFs.

An all-glass based micro gas chromatographic column for light hydrocarbon separation with HKUST-1 as stationary phase

BackgroundThe gas chromatography column is one of the key components of the gas chromatograph and typically be miniaturized using micro-electro-mechanical system (MEMS) technology. Due to the limited area of the Si wafer, the column length of micro gas chromatographic column (μGCC) is usually much smaller than that of commercial chromatographic columns. Therefore, it is always difficult to use μGCCs to separate small molecule gas components such as light hydrocarbons. More importantly, the heterogeneous microchannel surface formed by silicon glass bonding causes uneven stationary phase coating, further preventing the improvement of separation performance. ResultsIn this paper, a novel all-glass based μGCC with 2 m length for the separation of light hydrocarbons is proposed. The microchannels of the μGCC were directly prepared in the glass substrate by ultrafast laser assisted chemical etching (ULAE). The all-glass microchannels make the coating of the hydrophilic metal-organic frameworks (MOFs) stationary phase continuously because of the homogeneous material composition. Therefore, a widely used copper based hydrophilic MOFs HKUST-1 was used as stationary phase for coating and testing. The test results show that the μGCC which is an open tubular column can realize the baseline separation of light hydrocarbons at 100 °C. And the resolution of difficult separated compounds, methane and ethane, can reach 12.98, which is 201.86 % higher than the silica-based monolithic capillary column in the relevant research. The resolution of ethane and ethylene reaches 6.81 at 120 °C. SignificanceThe μGCC fabricated by ULAE method is composed of all-glass and has the uniform stationary phase coating because of the homogeneous microchannel surface which greatly improve the separation performance, resulting in a large resolution for methane and ethane. The all-glass μGCC has broad application prospects in light hydrocarbon separation.

Organic-silica hybrid monolithic sorbents for sample preparation techniques: A review on advances in synthesis, characterization, and applications

Organic-silica hybrid monolithic materials have attracted considerable attention as potential stationary phases in separation science. These materials combine the advantages of organic polymer and silica-based monoliths, including easy preparation, lower back pressure, high permeability, excellent mechanical strength, thermal stability, and tunable surface chemistry with high surface area and selectivity. The outstanding chromatographic efficiency as stationary phase of hybrid monolithic capillary columns for capillary liquid chromatography and capillary electrochromatography has been reported in many papers. Organic-silica hybrid monolithic materials have also been extensively used in the field of sample preparation. Owing to their surface functionalities, these porous sorbents offer unique selectivity for pre-concentration of different analytes in the most complex matrixes by fast dynamic transport. These sorbents not only improve the analytical method sensitivity, but also introduce novelties in terms of extraction devices and instrument coupling strategies. The current review covers the period spanning from 2017 to 2023 and describes the properties of organic-inorganic hybrid monolithic materials, the present status of this technology and summarizes recent developments in their use as innovative sorbents for microextraction sample preparation techniques (solid phase microextraction with pipette tip, offline in-tube SPME, in-tube SPME online with LC, and in-tube SPME directly coupled with mass spectrometry). Aspects such as the synthesis methods (sol–gel process, one-pot approach, and polyhedral oligomeric silsesquioxanes-based procedure), characterization techniques, and strategies to improve extraction efficiency in various applications in different areas (environmental, food, bioanalysis, and proteomics) are also discussed.

Covalent organic frameworks based hierarchical porous hybrid monolithic capillary: Synthesis, characterization, and applications in trace metals analysis

The preparation of hierarchical porous monolithic column with high covalent organic frameworks (COF) loading and micropores accessibility is challenging due to the easy aggregability and sedimentation of COFs. Herein, a novel strategy based on high internal phase emulsion (HIPE) polymerization was proposed for preparing COF hybrid capillary monolithic column with hierarchical porosity. COFs with different frameworks including imine COFs (COF-OMe, COF-F and COF-SH), triazine COF (CTF-1) and boron-based COF (COF-5) were selected to investigate the universality of the preparation strategy. The presence of COF in the monolithic capillary was confirmed by scanning electron microscope, X-ray diffraction and fourier transform infrared spectroscopy. Nitrogen adsorption/desorption experiments and thermogravimetric analysis showed that the prepared COF hybrid monolithic capillary exhibited high COF loading (e.g., 28.7% for COF-SH) and accessibility (e.g., 98.5% for COF-SH), mainly due to the thin walls of void-window structures originated from polymerization of HIPE. The successful preparation of water-stable COF-F, COF-OMe, COF-SH and CTF-1 hybrid monolithic columns demonstrated the proposed synthesis strategy is universal to water-stable COF without tedious optimization of dispersion system, effectively avoiding the sedimentation of COF in pre-polymerization solution. Then, the sulfhydryl-modified COF hybrid polymer (poly(COF-SH-HIPE)) monolithic column was evaluated for the extraction of heavy metal ions, and a method based on poly(COF-SH-HIPE) monolithic capillary microextraction on-line coupled with inductively coupled plasma mass spectrometry detection was developed for analysis of trace Cd, Hg and Pb in human fluid samples.

Lipase as a Chiral Selector Immobilised on Carboxylated Single-Walled Carbon Nanotubes and Encapsulated in the Organic Polymer Monolithic Capillary for Nano-High Performance Liquid Chromatography Enantioseparation of Racemic Pharmaceuticals.

Herein, we report the preparation of lipase immobilised on single-walled carbon nanotubes (SWCNTs) as an enantioselector for capillary monolithic columns and their application in the chiral separation of racemic pharmaceuticals. The columns were prepared through the encapsulation of functionalised SWCNTs (c-SWCNTs) within an organic monolithic polymer, followed by the immobilisation of lipase over the obtained monolith, over a three-day (L1) and five-day (L2) period. The prepared columns were tested for the enantioselective nano-HPLC separation of 50 racemic drugs. A suitable resolution was achieved for 25 drugs using nano-RP-HPLC conditions for both the L1 and L2 capillaries, while no specific resolution was detected under normal-phase HPLC conditions. The developed c-SWCNT-lipase-based polymeric monolithic capillaries are a promising expansion for separating pharmaceutical enantiomers' using nano-HPLC.

A promising sensing platform for explosive markers: Zeolite-like metal-organic framework based monolithic composite as a case study

Preconcentration for on-site detection or subsequent determination is a promising technique for selective sensing explosive markers at low concentrations. Here, we report divinylbenzene monolithic polymer in its blank form (neat-DVB) and as a composite incorporated with sodalite topology zeolite-like metal-organic frameworks (3-ZMOF@DVB), as a sensitive, selective, and cost-effective porous preconcentrator for aliphatic nitroalkanes in the vapor phase as explosive markers at infinite dilution. The developed materials were fabricated as 18 cm gas chromatography (GC) monolithic capillary columns to study their separation performance of nitroalkane mixture and the subsequent physicochemical study of adsorption using the inverse gas chromatography (IGC) technique. A strong preconcentration effect was indicated by a specific retention volume adsorption/desorption ratio equal to 3 for nitromethane on the neat-DVB monolith host-guest interaction, and a 14% higher ratio was observed using the 3-ZMOF@DVB monolithic composite despite the low percentage of 0.7 wt.% of sod-ZMOF added. Furthermore, Incorporating ZMOF resulted in a higher percentage of micropores, increasing the degree of freedom more than bringing stronger adsorption and entropic-driven interaction more than enthalpic. The specific free energy of adsorption (ΔGS) values increased for polar probes and nitroalkanes, denoting that adding ZMOFs earned the DVB monolithic matrix a more specific character. Afterward, Lewis acid-base properties were calculated, estimating the electron acceptor (KA) and electron donor (KB) constants. The neat-DVB was found to have a Lewis basic character with KB/KA = 7.71, and the 3-ZMOF@DVB had a less Lewis basic character with KB/KA = 3.82. An increased electron-accepting nature can be directly related to incorporating sod-ZMOF into the DVB monolithic matrix. This work considers the initial step in presenting a portable explosives detector or preconcentrating explosive markers trace prior to more sophisticated analysis. Additionally, the IGC technique allows for understanding the factors that led to the superior adsorption of nitroalkanes for the developed materials.

Optimization of the Preparation of Hydrophilic Poly(DHPMA-co-MBA) Monolithic Capillary Columns: A New Support for Affinity Chromatography

In miniaturized affinity chromatography, the development of hydrophilic organic monoliths with reduced non-specific interactions and high-protein grafting capacity remains a hot topic. In this work, we propose the one-step synthesis of a diol organic monolith to replace the gold-standard epoxy-based organic monoliths (which require post-modification, namely hydrolysis, prior to use). The synthesis of this new monolith builds upon the use of N-N’-Methylenebis(acrylamide) (MBA), as a hydrophilic crosslinker, and 2,3-dihydroxypropyl methacrylate (DHPMA), a diol monomer that eliminates the time-consuming epoxy ring opening step and its associated side reactions. The optimization of one-step synthesis parameters led to a monolith with a satisfactory permeability ((4.8 ± 0.5) × 10−14 m2), high efficiency (117,600 plates/m at optimum flow velocity (uopt = 0.09 cm s−1)) and reduced non-specific interactions. It is exemplified by its separation ability in the HILIC mode (separation of nucleosides), and by the retention data set of 41 test solutes, which were used to evaluate the non-specific interactions. This new poly(DHPMA-co-MBA) monolith has not only hydrophilic surface properties, but also improved protein grafting capacity compared to the glycidyl-based monolith (13 ± 0.7 pmol cm−1). The potential of this monolith is illustrated in affinity chromatography, where the concanavalin ligands are ranked according to their Kd values.

A protocol for fabrication of polymer monolithic capillary columns and tuning the morphology targeting high-resolution bioanalysis in gradient-elution liquid chromatography.

Polymer monolithic stationary phases are designed as a continuous interconnected globular material perfused by macropores. Like packed column, where separation efficiency is related to particle diameter, the efficiency of monoliths can be enhanced by tuning the size of both the microglobules and macropores. This protocol described the synthesis of poly(styrene-co-divinylbenzene) monolithic stationary phases in capillary column formats. Moreover, guidelines are provided to tune the macropore structure targeting high-throughput and high-resolution monolith chromatography. The versatility of these columns is exemplified by their ability to separate tryptic digests, intact proteins, and oligonucleotides under a variety of chromatographic conditions. The repeatability of the presented column fabrication process is demonstrated by the successful creation of 12 columns in three different column batches, as evidenced by the consistency of retention times (coefficients of variance [c.v.]=0.9%), peak widths (c.v.=4.7%), and column pressures (c.v.=3.1%) across the batches.

Ameliorative effect of traditional polyherbal formulation on TNF-α, IL-1β and Caspase-3 expression in kidneys of wistar rats against sodium fluoride induced oxidative stress

Ethnopharmacological relevanceSharbat-e-bazoori Motadil (SBM) is a polyherbal formulation that have been used for centuries as a part of the Unani system of medicine for renal disease. Aim of the studyThe objective of this study was to explore and validate the nephroprotective potential of sugar-free SBM (SF-SBM) and its mechanisms of action against sodium fluoride (NaF)-induced nephrotoxicity in HEK-293 cells. Additionally, the study aimed to assess the quality control of SF-SBM and investigate its effects using an in vivo rat model with pattern recognition following oral administration of SF-SBM. Materials and methodsThe nephroprotective effect of SF-SBM was investigated using both an HEK-293 cell line and Wistar rats. Nephrotoxicity was induced in these models by administering NaF at a concentration of 600 ppm (parts per million) for a duration of seven days. The SF-SBM formulation was standardized using high-performance thin-layer chromatography (HPTLC) to assess the presence of marker compounds, namely gallic acid, quercetin, and ferulic acid. Metabolite characterization of SF-SBM was carried out using ultra-high-performance liquid chromatography mass spectrometry (UPLC-MS) with a monolithic capillary silica-based C18 column. This analytical technique allowed for the identification of bioactive substances and verification of the identified markers. Acute toxicity of SF-SBM was evaluated in Wistar rats by administering a single oral dose of 2000 mg/kg of SF-SBM. The nephroprotective efficacy of SF-SBM was further assessed at low (LD), medium (MD) and high (HD) doses of 32.1, 64.2, and 128.4 mg/kg, respectively, administered orally. Nephrotoxicity was induced in Wistar rats by adding NaF to their drinking water for seven days. Biochemical and urine markers were analyzed to evaluate the antioxidant, inflammatory, and apoptotic potential of SF-SBM. Additionally, histopathological analysis and immunohistochemical alterations in the expression of caspase-3 and nicotinamide adenine dinucleotide phosphate (NADPH) oxidase-4 (NOX-4) in kidney tissue were performed to confirm the findings of the in vivo experiments. Furthermore, in vivo pattern recognition of SF-SBM metabolites, identified through GC-MS metabolomics, and in-silico docking analysis of major metabolites in plasma were conducted to gain further insights. ResultPhytochemical analysis using HPTLC, TLC-bioautography, and UPLC-MS revealed the presence of several bioactive constituents in SF-SBM, including ferulic acid, gallic acid (GA), ellagic acid, quercetin, and apigenin. These compounds exhibit diverse pharmacological properties. In vitro studies demonstrated the protective effect of SF-SBM on HEK-293 cell line against nephrotoxicity. The acute toxicity study of SF-SBM at a dose of 2000 mg/kg showed no mortality or signs of toxicity throughout the 14-day observation period. In the in vivo studies, administration of NaF resulted in significant elevation (P < 0.001) of biochemical and urine parameters, indicating oxidative, inflammatory, and apoptotic stress. Histopathological examination revealed severe depletion of Bowman's capsule, and immunohistochemistry demonstrated negative immunostaining for caspase-3 and reduced NOX-4 reactions. Pre-treatment with SF-SBM significantly attenuated the elevated biochemical and urine markers, restored the antioxidant enzyme levels (such as SOD, CAT, GSH, GPx and NO), and regulated the expression of inflammatory cytokines (TNF-α, IL-1β, CASP-3) in kidney tissue at doses of SF-SBM-MD (64.2 mg/kg) and SF-SBM-HD (128.4 mg/kg), showing comparable results to those of α-Ketoanalogue. Histopathological assessment demonstrated improvements in tissue damage. Pattern recognition analysis of SF-SBM identified the presence of 56 metabolites at different time intervals. Additionally, in-silico studies revealed strong interactions of SF-SBM with a binding energy of −6.5 and −5.6 kcal for 4C2N. ConclusionThe phytoconstituents present in SF-SBM play a crucial role in its nephroprotective action by acting as potent antioxidants and reducing proinflammatory and apoptotic damage in rat cells. This indicates that SF-SBM has promising potential for the treatment of nephrotoxicity.

Annual review of capillary electrophoresis technology in 2022

This article provides a detailed review of capillary electrophoresis (CE) technology in 2022, summarizing a total of 881 CE technology-related articles searched from ISI Web of Science using the keywords "capillary electrophoresis mass spectrometry" or "capillary isoelectric focusing" or "micellar electrokinetic chromatography" or "capillary electrophoresis" (excluding "capillary electrochromatography""microchip" "microfluidic" "capillary monolithic column"). The review focuses on 16 articles published in Lancet Global Health, ACS Central Science, Microbiome, Trends in Food Science & Technology, TrAC-Trends in Analytical Chemistry, Journal of Pharmaceutical Analysis, Journal of Cachexia, Sarcopenia and Muscle, Food Hydrocolloids, Science of the Total Environment, and Carbohydrate Polymers with impact factors (IFs) greater than 10.0, and 46 articles published in Analytical Chemistry, Analytica Chimica Acta, Talanta, and Food Chemistry with IFs between 5.0 and 10.0. A comprehensive overview of representative CE works published in Journal of Chromatography A, Electrophoresis, and important Chinese core journals (Peking University) with IFs<5.0 is also provided. Based on IFs, this review introduces representative works on CE to facilitate readers' understanding of important research advances in CE technology over the last year.

Poly(carboxyethyl acrylate-co-ethylene glycol dimethacrylate) precursor monolith with bonded Tris ligands for use in hydrophilic interaction capillary electrochromatography

The facile preparation of a monolithic capillary column with surface bound polar ligands for use in hydrophilic interaction capillary electrochromatography is described. It involved the conversion of poly(carboxyethyl acrylate[CEA]-co-ethylene glycol dimethacrylate[EDMA]) precursor monolith (the so-called carboxy monolith) into a Tris bonded monolith by a post-polymerization functionalization process in the presence of a water soluble carbodiimide, namely N-(3-dimethylaminopropyl)-N´-ethylcarbodiimidehydrochloride. The carbodiimide assisted conversion, allowed the covalent attachment of the carboxyl group of the precursor monolith to the amino group of the Tris ligand via a stable amide linkage. This resulted in the formation of Tris poly(CEA-co-EDMA) monolith, which exhibited the typical retention behavior of hydrophilic interaction stationary phase when analyzing polar and slightly polar neutral or charged compounds. In fact, neutral polar species such as dimethylformamide, formamide and thiourea were retained in the order of increased polarity with acetonitrile rich mobile phase. Also, neutral p-nitrophenyl maltooligosaccharides (PNP-maltooligosaccharides) served as a polar homologous series for gauging the hydrophilicity of the Tris poly(CEA-co-EDMA) monolith, thus forming a versatile testing homologous series for other hydrophilic columns. Other polar anionic species (e.g., hydroxy benzoic acids and nucleotides) and weakly polar anionic compounds (e.g., dansyl amino acids and phenoxy acid herbicides) as well as polar weak bases namely nucleobases and nucleosides were used to probe the hydrophilic characters of the Tris poly(CEA-co-EDMA) monolith. The various polar and weakly polar compounds just mentioned revealed the wide potentiality of the hydrophilic interaction column under investigation.

A monolithic composite based on zeolite-like metal-organic framework@divinylbenzene polymer separates azeotropic fluorocarbon mixture efficiently

Organic monolithic columns are mainly used to separate macromolecules; however, many attempts to extend their performance toward small molecules were examined by incorporating micro- and nanoparticles. The incorporation technique enabled utilizing organic monoliths in gas chromatography (GC) for small molecules, which are still scarce. Here, we prepared a composite matrix of capillary monolithic columns of a zeolite-like metal-organic framework with a sodalite topology (sod-ZMOF) and Divinylbenzene polymer (DVB) for GC separations under 0.5 MPa. Relatively short DVB monolithic columns (18 cm long × 0.25 mm i.d.) incorporated with a tiny amount of sod-ZMOF nanoparticles (0.7 and 1.17 wt%) with an average particle size of 225 nm were successfully fabricated and used to separate linear alkanes and polar probes mixtures with increasing resolution up to 3.7 and 5.1 times, respectively, compared to a blank DVB monolithic column. A high-performance separation of linear alkanes series mixture (methane to decane) was exhibited in less than 2 min. McReynolds constants revealed that sod-ZMOF provided the composite monolith with a nonpolar character yielding a negative average polarity value smaller than the standard squalene column. An Excellent retention time of pentane and octane day-to-day reproducibility was achieved during 16 days and over more than 500 runs with RSD% of 2.25% and 3.3% using a composite monolithic column with 5 mg mL−1 sod-ZMOF (5-ZMOF@DVB). In addition, a qualitative determination of the gas mixture content of three commercially available Lighter gas cartridges was performed via the 5-ZMOF@DVB column. Finally, successfully separating an azeotropic freon mixture of difluoromethane (R-32) and pentafluoroethane (R-125) was achieved with a selectivity of up to 4.84. A further thermodynamic study related the preferential adsorption of R-125 to entropic factors rather than enthalpic while trapping inside ZMOF pores. This work sheds light on utilizing the infinite diversity of MOFs and combining their properties with high permeability and easily fabricated organic monoliths for GC separations of light molecules and gasses. Furthermore, the study highlights the role of GC as an easy and fast approach for the preliminary evaluation of the separation efficiency of porous polymers.

Determination of 5-methyldeoxycytosine and oxidized derivatives by nano-liquid chromatography with zwitterionic monolithic capillary column

DNA methylation is one of the epigenetic modifications at the 5-carbon of cytosine to form 5-methyl-2′-deoxycytidine (5mdC). In mammalian cells, 5mdC can be transferred to 5-hydroxymethyl-2′-deoxycytidine (5hmdC) by ten-eleven translocation (TET), and 5hmdC is further oxidized to 5-formyl-2′-deoxycytidine (5fodC) and 5-carboxyl-2′-deoxycytidine (5cadC). In the present work, we developed a highly sensitive nano liquid chromatographic method for the determination of 5mC and 5hmC with zwitterionic monolithic capillary column. The conditions for the preparation of zwitterionic monolithic capillary column were systematically optimized. The monolithic capillary column displayed high column efficiency for nucleoside dA (190,000 plates/m) and allowed the baseline separation of 10 standard nucleosides in HILIC mode. The detection sensitivity was improved significantly by using the large volume injection combined with sample stacking onto the head of the column when sample was dissolved in high content organic solvent (ACN: H2O = 97:3). The limit of detection for 5mdC and 5hmdC were determined as 4 nM and 3 nM, respectively, and the corresponding limit of quantification were determined as 12 nM and 10 nM, respectively. Further, the zwitterionic monolithic capillary column can be easily utilized in nano-LC and mass spectrometry coupling for qualitative analysis of 5mdC, 5hmdC, 5fodC and 5cadC in real mouse brain sample. The whole genomic DNA methylation levels in mouse brain sample can be easily determined with UV detection.

Preparation of poly(N-vinylpyrrolidone-co-pentaerythritol triacrylate) monolithic column for hydrophilic interaction chromatography.

A method for the preparation of poly(N-vinylpyrrolidone-co-pentaerythritol triacrylate copolymerization)-based monolithic capillary column was reported for the separation of polar small molecular weight compounds with nano-liquid chromatography in hydrophilic interaction chromatography mode. The monolithic columns were prepared by in situ copolymerization of N-vinylpyrrolidone and a cross-linker pentaerythritol triacrylate in a binary porogenic agent consisting of methanol and water. The composition of the polymerization solution was systematically optimized in terms of column permeability, theoretical plate number, asymmetric factor, and retention factor. A typical hydrophilic chromatography retention mechanism was observed with a mobile phase composed of a high content of organic solvent. The preparation method is simple and robust, the precursor N-vinylpyrrolidone is chemically stable, cheap, and easily available. The N-vinylpyrrolidone-based hydrophilic interaction chromatography stationary phase displays satisfactory separation selectivity for a range of polar test analytes, including benzoic acid derivatives, nucleosides, and phenols.

Terminally Phosphorylated Triblock Polyethers Acting Both as Templates and Pore-Forming Agents for Surface Molecular Imprinting of Monoliths Targeting Phosphopeptides.

The novel process reported here described the manufacture of monolithic molecularly imprinted polymers (MIPs) using a terminally functionalized block copolymer as the imprinting template and pore-forming agent. The MIPs were prepared through a step-growth polymerization process using a melamine-formaldehyde precondensate in a biphasic solvent system. Despite having a relatively low imprinting factor, the use of MIP monolith in liquid chromatography demonstrated the ability to selectively target desired analytes. An MIP capillary column was able to separate monophosphorylated peptides from a tryptic digest of bovine serum albumin. Multivariate data analysis and modeling of the phosphorylated and nonphosphorylated peptide retention times revealed that the number of phosphorylations was the strongest retention contributor for peptide retention on the monolithic MIP capillary column.

Chiral covalent organic framework incorporated organic polymer monolithic capillary column for enantioseparations.

A chiral covalent organic framework was synthesized, characterized, and incorporated into organic polymer monolithic capillary columns to provide chiral stationary phases for enantioseparations. The prepared monolithic capillary columns were characterized by scanning electron microscopy and elemental analysis. To obtain better enantioseparations, the columns' preparation conditions, and enantioseparation conditions were optimized. Baseline resolutions of several chiral compounds were obtained with good reproducibility and stability. Furthermore, the mechanism of chiral recognition was investigated using molecular docking with AutoDock. Docking results showed that the enantioselectivity factor rather than resolution is correlated with the binding free energy difference between enantiomers with the chiral covalent organic framework. And abundant acetoxy and nitrile groups as well as benzene rings in the chiral covalent organic framework are responsible for the enantioseparation ability of the chiral monolithic capillary columns.