Monolithic Capillary Columns Research Articles

Segmented two-dimensional liquid chromatography. Proof of concept study

The separation in liquid chromatography is defined either by the space domain where it proceeds until the least retained analyte reaches the outlet of the column or by the time when individual analytes elute out of the column. These two approaches lead to the four possible combinations of two-dimensional liquid chromatography with online space x time coupling being the least experimentally feasible. Here, we show the development of a novel two-dimensional liquid chromatography method combining separation defined by space and the conventional elution-based separation. First-dimension column consisted of four capillary segments coupled serially via two-position six-port valves allowing an online and comprehensive transfer of analytes from the first to the second dimension. After initial experiments using homemade monolithic capillary columns, we tested commercially available columns in both dimensions. We ended with the combination of packed capillary columns in the first dimension and monolithic capillary column in the second dimension. We used a reversed-phase retention mechanism in the first spatial dimension, while HILIC was in the second, time-based dimension. We also developed a theoretical model to describe the proposed two-dimensional separation that was further confirmed by utilizing both an isocratic and gradient elution in the second dimension. Finally, we applied our experimental setup to separate neurotransmitters contained in human urine.

N, N′-methylene bisacrylamide/divinyl benzene based-highly cross-linked hybrid monolithic column: Production and its applications for powerful capture of four chlorophenols

In this paper, the role of the halogen bond in capillary monolithic column microextraction was explored for the first time. Benzene-1,3,5-tricarbohydrazide (BTH) was synthesized as a functional monomer, N, N′-methylene bisacrylamide (MBA) and divinyl benzene (DVB) were used as cross-linking agents, the hybrid monolithic column of poly (BTH-co-DVB-co-MBA) was prepared using methanol and polyethylene glycol as pore-forming agents and azodiisobutyronitrile as the initiator. Due to the existence of BTH, a large number of nitrogen atoms (Lewis base) were introduced into the monolithic column, which could form a halogen bond with chlorine-containing organic pollutants and enhance its adsorption performance. Based on the monolithic column, a sensitive and environment-friendly solid-phase microextraction technology was studied. The monolithic column was integrated with high-performance liquid chromatography (HPLC) to extract and detect four kinds of chlorophenol in real water samples. Under best conditions, the method showed excellent extraction ability and linearity, with a linear correlation coefficient of 0.9958–0.9987, a low detection limit (LOD) of 0.04–0.23 μg L−1 (S/N = 3), and relative standard deviation (RSD) less than 3.09%. The recovery rate was kept between 87.30% and 123.00%, and the RSD was less than 3.83%, which indicated that the column had powerful capture performance, high precision, and strong anti-matrix interference ability in the real sample, and had potential application value in practical work.

Metabolite Profiling and Nephroprotective Potential of the Zea mays L. Silk Extract against Diclofenac-Induced Nephrotoxicity in Wistar Rats.

The lack of sufficient scientific evidence prompted the analytical investigation of nephroprotective potential of the silk extract of Zea mays L., which is traditionally and ethnomedicinally used for various disorders including kidney dysfunction. The present study was conducted to investigate the phytochemical analysis and demonstrate the nephroprotective potential of the methanolic silk extract of Z. mays L. using a rodent model. High-performance thin-layer chromatography (HPTLC) analysis was carried out to standardize the methanolic silk extract of Z. mays (ZME) using naringenin as a marker. The metabolite profiling of the ZME was carried out using ultrahigh-performance liquid chromatography mass spectrometry (UPLC-MS) on a monolithic capillary silica-based C18 column to identify bioactive compounds and for confirmation of the identified markers. Furthermore, for acute toxicity study, a single dose (2000 mg/kg bw) of the ZME was administered orally to Wistar rats. Also, nephrotoxicity was induced in Wistar rats by injecting diclofenac (DC) (50 mg/kg, bw, i.p.) at a single dose. The efficacy of the ZME as a nephroprotective agent was then evaluated at doses of 100, 200, and 400 mg/kg/day, bw, p.o. Furthermore, the kidney, liver, antioxidant, inflammatory, and apoptotic biochemical markers and histopathological and immunohistochemical alterations (caspase-3 and reduced nicotinamide adenine dinucleotide phosphate (NADPH) oxidase-4 (NOX-4)) were evaluated. Phytochemical analysis by HPTLC and UPLC-MS revealed the presence of naringenin, vanillic acid, ferulic acid, gallic acid (GA), ellagic acid, quercetin, and morin, along with other bioactive constituents exhibiting multiple pharmacological properties. The acute toxicity study of the ZME showed no mortality or any clinical signs of toxicity through all the 14 days of the toxicity study at a dose of 2000 mg/kg. Also, administration of DC caused a significant elevation (P < 0.001) in kidney biochemical parameters and also caused oxidative, inflammatory, and apoptotic stress. Furthermore, DC also caused histopathological and immunohistochemical changes. Pretreatment with the ZME attenuated the elevated biochemical markers significantly at medium and high doses along with improvement in histopathological and immunohistochemical damages and showing comparable results to those of α-ketoanalogue. The present study verifies the traditional claims of Z. mays silk alleviating various kidney and related disorders by concluding the nephroprotective potential of the ZME. The nephroprotective activity of the ZME is attributed to the phytoconstituents present, acting as potent restoring antioxidants and preventing inflammatory and apoptotic cellular damages in rats. Thus, it holds promising potential in the management of nephrotoxicity.

Porous capillary monolithic column coupled with ultrahigh performance liquid chromatography-tandem mass spectrometry for fast and effective separation and determination of estrogens

In this work, a porous capillary monolithic column was simply prepared by in situ thiol-alkyne click polymerization of dipentaerythritol hexakis (3-mercaptopropionate) and dimethyl dipropargylmalonate in fused-silica capillary. The capillary monolithic column shows excellent permeability, high porosity, and thoiether-rich groups, thereby, a high-efficient capacity for trace estrogens from complex samples are obtained via electron-donor-acceptor π-π interaction and hydrophobic interaction. The highest adsorption efficiency for estrogens is achieved at pH = 7.0 with a flow rate of 0.200 mL min−1. The superior adsorption capacities of the as-prepared capillary column for eight estrogens range from 0.092 mg m−1 to 0.31 mg m−1. A simple, reliable, and sensitive method for the determination of eight estrogens in biological and environmental samples is developed using the monolithic polymer as in-tube solid-phase microextraction coupled with ultrahigh performance liquid chromatography-tandem mass spectrometry (SPME-UPLC-MS/MS), and the total instrumental analysis time for the SPME-UPLC-MS/MS procedures was about 60 min per sample. The developed method shows a wide linear range (0.0500–5.00 μg L−1), and low limits of detection (5.34–9.63 ng L−1) for estrogens. The concentrations of estrogens in serum, urine, and pond water samples are found to be no more than 3.69, 0.741, and 1.04 μg L−1, respectively, and the satisfying recoveries for the eight estrogens range from 80.3% to 113% with relative standard deviations (n = 5) of 1.5–9.4%. The established method is highly potential for extraction and analysis of ultratrace target estrogens in complex matrices, such as biological and environmental samples.

Capillary monolithic columns based on poly(styrene-divinylbenzene-methacrylic acid) copolymer for liquid chromatography and electrochromatography

Capillary monolithic columns based on poly(styrene-divinylbenzene-methacrylic acid) copolymer for liquid chromatography and electrochromatography

Annual review of capillary electrophoresis technology in 2021

该文为2021年毛细管电泳(capillary electrophoresis, CE)技术年度回顾。归纳总结了以“capillary electrophoresis-mass spectrometry”或“capillary isoelectric focusing”或“micellar electrokinetic chromatography”或“capillary electrophoresis”为关键词在ISI Web of Science数据库中进行主题检索(排除“capillary electrochromatography”“microchip”和“capillary monolithic column”)得到的2021年CE技术相关研究论文291篇,以及中文期刊《色谱》和《分析化学》中相关研究论文9篇。重点介绍了影响因子(IF)≥10.0的Coordination Chemistry Reviews, Angewandte Chemie-International Edition, Nature Protocols, TrAC-Trends in Analytical Chemistry, Signal Transduction and Targeted Therapy发表的7篇论文;以及影响因子5~10之间的代表性期刊Analytical Chemistry, Analytica Chimica Acta, Talanta和Food Chemistry的42篇论文;对影响因子小于5但CE技术报道较为集中的Journal of Chromatography A和Electrophoresis,国内重要的中文期刊《色谱》和《分析化学》中的代表性工作进行了概述。该文根据国际通用学术水平评价指标之一的影响因子选择期刊,结合期刊发表CE论文代表性工作进行介绍,便于读者快速了解毛细管电泳技术在过去一年的重要研究进展。

Profiling protein interactions by purification with capillary monolithic affinity column in combination with label-free quantitative proteomics

An approach for profiling protein-protein interactions by using affinity purification with capillary monolithic immobilized metal affinity chromatography column (cm-IMAC) in combination with label free quantitative proteomics was described in the present work. The cm-IMAC columns were prepared in a single step by copolymerization of the function monomer, namely (S)-2,2′-((1-carboxy-5-(pent‑4-enamido)pentyl)azanediyl)diacetic acid which provide a nitrilotriacetate (NTA) moiety to form chelated complexation with Ni (II) ions, inside the fused silica capillaries. The His6-tagged bait protein can be easily immobilized on the cm-IMAC columns through the formation of chelating complexation with the NTA-Ni (II) functional groups of the matrix. The cm-IMAC columns were used to explore protein-protein interactions (PPIs) on a proteomic scale when combined with label-free proteomics. A known interaction pair of proteins, namely NDP52 (amino acid sequence 10–126) and NAP1 (33–75) as well as Bcl-2 family proteins were used for proof of concept. New interactors of Bcl-XL were identified and validated by co-immunoprecipitation.

Metal organic framework- modified monolithic column immobilized with pepsin for enantioseparation in capillary electrochromatography

Metal-organic frameworks (MOFs), defined as a class of microporous hybrid materials, are established by coordination of metal cations with functional organic ligands. In addition to outstanding porosity and large surface area, the structures and functions of MOFs can be designed and adjusted based on different destinations, which would be employed as stationary phases in various chromatographic modes. Pepsin, a class of protein, has been investigated as chiral selector owing to their unique interactions with analytes based on chiral or affinity selectivity. In this work, MOF-5 was exploited to grow on the support of poly (glycidyl methacrylate)–co-(ethylene dimethacrylate) [poly(GMA-co-EDMA)] monoliths by layer-by-layer self-assembly method. Pepsin was subsequently bonded with the carboxyl group of MOF-5 through amidation reaction. The ultimate pepsin@MOF-5@poly(GMA-co-EDMA) column was applied for enantioseparation of six basic chiral drugs by capillary electrochromatography with good resolution and repeatability. Compared with the pepsin modified monolithic column, the newly prepared column with MOF-5 shows significantly enhanced enantiomeric resolution, which reveals that MOFs-modified capillary monolithic columns lead a promising road to separation of racemates by chromatography.

Miniaturized antithrombin III affinity monolithic columns coupled to TOF-MS for the selective capture and release of fondaparinux a high affinity antithrombin III ligand.

This work explores the capability of antithrombin III-functionalized capillary monolithic columns (in-line coupled with MS detection) to selectively capture, release and detect high affinity binders of antithrombin III (AT III) from oligosaccharides mixtures. The in-situ characterization of home-made AT III affinity columns was done by frontal affinity chromatography coupled to MS detection using fondaparinux as model ligand. Three different preparation methods of miniaturized antithrombin III monolithic affinity columns were optimized and compared. Immobilization of antithrombin III onto Concanavalin A functionalized column is the simplest method but leads to lowest protein density. The two other methods, direct grafting on aldehyde preactivated monoliths and immobilization of biotinylated antithrombin III to streptavidin-functionalized columns, require the presence of fondaparinux to protect the heparin binding site during the grafting process. Up to 1.3±0.3pmolcm-1 of antithrombin III were immobilized with both methods. The direct coupling of such miniaturized affinity columns to MS-detection was made possible by optimization of the elution step. Ammonia (0.1M) was chosen as an efficient and MS compatible solvent to elute fondaparinux. Finally, the complete analytical workflow (capture/elution/detection) was demonstrated to allow the selective capture and elution of fondaparinux initially contained in a complex oligosaccharide mixture with a limit of detection of 1pmol.

Fabrication of monolithic capillary columns with inner diameter 50-530μm employing a mixture of pentaerythritol tetraacrylate and polyhedral oligomeric silsesquioxane-methacrylate as crosslinkers.

Highly crosslinked monolithic capillary columns with inner diameters in the range of 50-530μm were prepared by radical polymerization of pentaerythritol tetraacrylate, polyhedral oligomeric silsesquioxane-methacrylate, and n-octadecyl methacrylate in the presence of methanol, dodecyl alcohol, and polyethylene glycol lauryl ether. Columns were evaluated by inverse size-exclusion chromatography employing a set of polystyrene standards of narrow molecular-size distribution and by scanning electron microscopy. Chromatographic performance under reversed-phase conditions was also evaluated. The combination of two effective crosslinkers as pentaerythritol tetraacrylate and polyhedral oligomeric silsesquioxane-methacrylate in the polymerization mixture allows for the preparation of robust and efficient monolithic capillary columns within a fairly wide range of internal diameters.

A Polymer-based Monolithic Capillary Column with Polymyxin-B Chiral Selector for the Enantioselective Nano-High Performance Liquid Chromatographic Pharmaceutical Analysis

Herein, we report the first use of Polymyxin-B antibiotic as a enantio-selector in polymer monolithic capillary. The capillaries were functionalised, characterized and tested for the enantioselective nano-HPLC separation of 50 racemic pharmaceutical drugs. They have been easily prepared by immobilizing Polymyxin-B over the organic polymer for 48 h (P1) or encapsulating Polymyxin-B within the organic polymer (P2) and tested for the enantioselective resolution of racemic drugs. Acceptable resolution was achieved for 21 drugs using RP-HPLC conditions on both (P1) and (P2) capillary columns, while no separation was observed under NP-HPLC conditions. Polymyxin-B is commercially available, easily solubilized and stable in both acidic and neutral media. The developed Polymyxin-B-based polymer monolithic capillaries provide a promising expansion of platform in enantioselective HPLC separations.

Rapid polymerization of polyhedral oligomeric siloxane-based zwitterionic sulfoalkylbetaine monolithic column in ionic liquid for hydrophilic interaction capillary electrochromatography

A novel polyhedral oligomeric siloxane (POSS)-based zwitterionic monolithic capillary column was prepared via one-pot polymerization in ionic liquid porogen, using N,N-dimethyl-N-methacryloxyethyl-N-(3-sulfopropyl)ammonium betaine (DMMSA) and methacrylic ethyl trimethylammonium chloride (META) as binary functional monomers, and methacryl substituted POSS as cross-linker. The pore structure, permeability and homogeneity were well tuned by optimizing the polymerization conditions. The resultant monolith was characterized by scanning electron microscopy, nitrogen adsorption/desorption isotherm and Fourier transform infrared spectroscopy. The incorporation of zwitterionic ligand (DMMSA), quaternary amine group (META) and rigid POSS skeleton endows the hybrid organic-silica monolith with high hydrophilicity, electrostatic interaction and good mechanical stability, as well as a tunable electroosmotic flow over wide pH range. A close investigation of capillary electrochromatographic separations of different types of polar compounds such as bases, nucleosides and benzoic acids on such stationary phase exhibited a retention independent column efficiency up to 118,000 plates/m (thiourea), as well as a mixed-mode hydrophilic interaction chromatography (HILIC) retention mechanism including weak electrostatic interaction, hydrophobic interaction and anion exchange.

Development of a multi-layering protein grafting process on miniaturized monolithic columns for weak affinity nano liquid chromatography application purposes

Affinity chromatography is a powerful technique to identify and quantify weak ligand-protein interactions (Kd in the range of mM to 0.1µM). In some fields such as Fragment Based Drug Discovery, the detection of very weak affinities (mM) is of utmost importance since weak ligands can be good starting points for the conception of high affinity ligands. However, the identification of such weak ligands can be hampered by the limited bulk density of active target grafted onto the support. At the same time, downscaling the chromatographic column is of utmost interest when scarce and/or expensive proteins are targeted. In this context, we herein present a novel approach of protein immobilization to improve the bulk density of active protein grafted onto organic capillary monolithic columns. The proposed approach is based on the streptavidin-biotin interaction and consists of successive grafting steps of biotinylated target protein onto streptavidin layers through a multi-layering process. Concanavalin A was used as model protein. The study focuses on the optimization of the grafting conditions to maximize the amount of active protein during the multi-layering process and highlights the impact of the biotinylation ratio of the protein. It is demonstrated that a 3-layer grafting process allows to improve the bulk density of active sites by a 2-fold factor compared to a single layer. This improvement in protein density allows to increase the affinity range of this technique to the millimolar range.

S‐citalopram imprinted monolithic columns for capillary electrochromatography enantioseparations

In this study, the molecular imprinting method was used to separate enantiomeric forms of chiral antidepressant drug, R,S-citalopram (R,S-CIT) in aqueous solution by CEC system combining the advantages of capillary electrophoresis (CE) and high-performance liquid chromatography (HPLC). For that, an amino acid-based molecularly imprinted monolithic capillary column was designed and used as a stationary phase for selective separation of S-citalopram (S-CIT) for the first time. S-CIT was selectively separated from the aqueous solution containing the other enantiomeric form of R-CIT, which is the same in size and shape as the template molecule. Morphology of the molecularly imprinted (MIP S-CIT) and non-imprinted (NIP S-CIT) monolithic capillary columns was observed by scanning electron microscopy. Imprinting efficiency of MIP S-CIT monolithic capillary column used for selective S-CIT separation was verified by comparing with NIP S-CIT and calculated imprinting factor (I.F:1.81) proved the high selectivity of the MIP S-CIT for S-CIT. Cavities formed for S-CIT form enabled selective (α = 2.08) separation of the target molecule from the other enantiomeric R-CIT form. Separation was achieved in a short period of 10 min, with the electrophoretic mobility of 7.68 × 10-6 m2 /Vs for R,S-CIT at pH 7.0 10mM PB and 50% ACN ratio. The performance of both MIP S-CIT and NIP S-CIT columns was estimated by repeating the R,S-CIT separations with intra-batch and inter-batch studies for reproducibility of retention times of R,S-CITs. Estimated RSD values that are lower than 2% suggest that the monolithic columns separate R,S-CIT enantiomers without losing separation efficiency.

Development of a portable micro-liquid chromatograph

该工作报道了一种自行设计研制的便携式微型液相色谱仪(portable micro liquid chromatograph, p-μLC)。p-μLC集成了二元大推力注射泵作为流动相驱动装置、毛细管整体柱为分离介质和紫外-可见/荧光两用流通池为在线检测单元。自行设计研制的二元大推力注射泵可以实现等度/梯度洗脱和流动相再装填功能,可控流速范围在0.025 μL/min到5.6 mL/min之间;自制的甲基丙烯酸酯C-18有机聚合物毛细管整体微柱可实现自有机小分子至生物大分子的分离;自行研制的光纤式紫外-可见/荧光两用流通池,可以通过光纤导入来自光源的紫外光和可见光,并采集透射光和与入射光反方向射出的荧光信号,流通池内使用自聚焦透镜和全反射光导毛细管等器件提高通光效率和吸收光程;两用流通池通过光纤分别连接由大功率发光二极管/脉冲氙灯光源和微型光栅光谱仪所组成的检测装置进行在线吸收和荧光光谱检测,检测波长范围为220~700 nm。p-μLC采用整体手提箱式结构,流路模块、检测模块等位于下主箱体中,采集、控制模块等位于上盖中,全重不超过8 kg。仪器由装载了自编控制采集软件的内置平板电脑进行控制和数据采集。使用自行制备的甲基丙烯酸酯C-18有机聚合物毛细管整体柱,在等度洗脱模式下,在p-μLC上分离了烷基苯化合物混合样品,其分离检测效果可以与商品化大型HPLC仪器相媲美。

Chiral Monolithic Silica-Based HPLC Columns for Enantiomeric Separation and Determination: Functionalization of Chiral Selector and Recognition of Selector-Selectand Interaction.

This review draws attention to the use of chiral monolithic silica HPLC columns for the enantiomeric separation and determination of chiral compounds. Properties and advantages of monolithic silica HPLC columns are also highlighted in comparison to conventional particle-packed, fused-core, and sub-2-µm HPLC columns. Nano-LC capillary monolithic silica columns as well as polymeric-based and hybrid-based monolithic columns are also demonstrated to show good enantioresolution abilities. Methods for introducing the chiral selector into the monolithic silica column in the form of mobile phase additive, by encapsulation and surface coating, or by covalent functionalization are described. The application of molecular modeling methods to elucidate the selector–selectand interaction is discussed. An application for enantiomeric impurity determination is also considered.

Recent Progress in FD-LC-MS/MS Proteomics Method.

Through the course of our bio-analytical chemistry studies, we developed a novel proteomics analysis method, FD-LC-MS/MS (fluorogenic derivatization-liquid chromatography-tandem mass spectrometry). This method consists of fluorogenic derivatization (FD), LC separation, and detection/quantification of the derivatized proteins, followed by isolation, tryptic digestion of the isolated proteins, and final identification of the isolated proteins using electrospray ionization nano-LC-MS/MS of the generated peptide mixtures with a probability-based protein identification algorithm. In this review, we will present various examples where this method has been used successfully to identify expressed proteins in individual human cells. FD-LC-MS/MS is also suitable for differential proteomics analysis. Here, two biological samples are treated by the same steps mentioned above, and the two chromatograms obtained are compared to identify peaks with different intensities (variation in protein levels). Associated peak fractions are then isolated, and the differentially expressed proteins between the two samples are identified by LC-MS/MS. Several biomarkers for cancers have been identified by FD-LC-MS/MS. For more efficient separation, nano-flow LC with a phenyl-bonded monolithic silica-based capillary column was adopted for cell-expressed intact protein analysis. The derivatized human cell proteins (K562) and yeast cell (Saccharomyces cerevisiae) proteins as model intact cell proteins were analyzed by nano-flow LC with fluorescence detection. More than 1,300 protein peaks were separated/detected from both cells. For straightforward comparison of multiple peak separation profiles, a novel type of chromatogram display, termed the “spiderweb” chromatogram, was developed. A nano-LC-FD-LC-mass spectrometry trial for molecular weight estimation of FD proteins has also been conducted.

Performance of functionalized monolithic silica capillary columns with different mesopore sizes using radical polymerization of octadecyl methacrylate

We report on the possibility to enhance the phase ratio and retention factor in silica monoliths. According to pioneering work done by Núñez et al. [1], this enhancement is pursued by applying a stationary phase layer via radical polymerization with octadecyl methacrylate (ODM) as an alternative to the customary octadecylsilylation (C18-derivatization). The difference in band broadening, retention factor and separation selectivity between both approaches was compared. Different hydrothermal treatment temperatures for the column preparation were applied to produce monolithic silica structures with three different mesopore sizes (resp. 10, 13, and 16 nm, as determined by argon physisorption) while maintaining similar domain size (sum of through-pore and skeleton size). It has been found that the columns with the poly(octadecyl methacrylate)-phase (ODM columns) provided a 60 to 80% higher retention factor in methanol-water mixture compared to the octadecylsilylated (ODS) columns produced by starting from similar silica backbone structures. In acetonitrile-water mixture, the enhancement is smaller (15 to 30% times higher), yet significant. By adjusting the fabrication conditions (for both the preparation of the monolithic backbones and the surface functionalization), the achieved retention factors (up k = 4.89 for pentylbenzene in 80:20% (v/v) methanol/water) are obviously higher than obtained in the pioneering study on ODM monoliths of Núñez et al. [1], and column clogging could be completely avoided. In addition, also separation efficiencies were significantly higher than shown in Ref. [1], with plate heights as low as 5.8 μm. These plate heights are however inferior to those observed on the ODS-modified sister columns. The difference can be explained by the slower intra-skeleton diffusion displayed by the ODM-modified columns, in turn caused by the larger obstruction to diffusion originating from the thicker stationary phase layer.

One-step synthesis of mercapto modified hierarchical porous polymer capillary monolithic column for chip based array microextraction of mercury species in cells

Exploitation of efficient adsorbent for analyzing mercury species in complex biological samples is still a big challenge. Herein, a MIL-101 covalently bonded and mercapto functionalized capillary monolithic column was prepared by one-step strategy involving simultaneous initiation of thiol-ene click reaction and radical polymerization. It showed improved specific surface area, hierarchical porous structure, rich sulfhydryl groups and high adsorption capacity for mercury species. It was embedded in the microchannel of microfluidic chip for chip-based array monolithic capillary microextraction (CMCME) of mercury species in cells. Methylmercury (MeHg+) and inorganic Hg (Hg2+) could be simultaneously retained on the prepared column and sequentially eluted; both species could also be simultaneously eluted with 4% thiourea in 0.5 mol L-1 HNO3 solution. Based on it, CMCME was combined with two online detection modes separately, direct inductively coupled plasma mass spectrometry (ICP-MS) detection and high-performance liquid chromatography (HPLC)-ICP-MS detection. The CMCME-ICP-MS system is applicable for the analysis of MeHg+ and Hg2+ with the ratio of lower than 5/1, with the limits of detection (LODs) of 2.6 (MeHg+) and 5.8 (Hg2+) ng L-1 and throughput of 8 h-1. Comparatively, the CMCME-HPLC-ICP-MS system is universal for Hg speciation in cells, providing LODs of 9.7 and 18.9 ng L-1 for MeHg+ and Hg2+ with a throughput of 10 h-1. Both systems exhibited good endurance to complex cell matrix and automated operation. The species analysis of Hg in cells incubated by Hg2+ or MeHg+ was achieved and the demethylation of MeHg+ in HepG2 cells was observed.

Preparation of Monolithic Silica and Polymer Capillary Columns with Ultrahigh Column Efficiencies and Comparisons between van Deemter Plots of Alkylbenzenes on These Two Kinds of Columns.

Monolithic silica and polymer capillary columns with ultrahigh column efficiencies were prepared. Permeability and electrochromatography performances of these two kinds of columns were compared. Monolithic silica columns bear higher permeability than polymer counterparts by two orders of magnitude. Furthermore, the van Deemter plots of alkylbenzenes on these two kinds of columns demonstrate that monolithic silica columns produce much lower plate heights of alkylbenzes than polymer columns do. Within the range of electroosmotic flow (EOF) velocity investigated, no uptrend of plate height with the increase of EOF was observed suggesting the great capacity of fast separation and high efficiency. The plate height of thiourea on monolithic silica columns is as low as 2.67μm, representing its corresponding column efficiency is over 430,000plates/m. As far as we know, it is the highest ever column efficiency reported in the literature. Moreover, the separation of butylbenzene isomers was obtained on the monolithic silica column.