Modern Optical Communication Research Articles

Homodyne Detection Quadrature Phase Shift Keying Continuous-Variable Quantum key Distribution with High Excess Noise Tolerance

Discrete-modulated continuous-variable quantum key distribution with homodyne detection is widely recognized for its ease of implementation, efficiency with respect to error correction, and its compatibility with modern optical communication devices. However, recent studies report that the application of homodyne detection obtains poor tolerance to excess noise and insufficient transmission distance, hence seriously restricting the large-scale deployment of quantum secure communication networks. In this paper, we propose a homodyne detection protocol using the quadrature phase shift keying technique. By limiting information leakage, our proposed protocol enhances excess noise tolerance to a high level. Furthermore, we demonstrate that homodyne detection performs better than heterodyne detection in quaternary-modulated continuous-variable quantum key distribution under the untrusted detector noise scenario. The security is analyzed using the tight numerical method against collective attacks in the asymptotic regime. Our results imply that the current protocol is able to distribute keys in nearly intercity area and thus paves the way for constructing low-cost quantum secure communication networks.

Performance optimization of an intersatellite optical wireless system using linearly polarized modes

Modern optical communication has advanced from the use of merely lengthy optical fibers to using features of the powerful wireless system and optics resulting in the use of lasers to transmit data at a much greater rate. This gave way to the optical wireless communication system growing roots into space communications. In this work, an intersatellite optical wireless communication link has been analyzed for studying the performance of the system considering linearly polarized modes. The link performance has been investigated in terms of the quality factor (Q factor) as a function of the transmission wavelength, detector type, data rate, distance, transmitter aperture diameter, and pointing error angle. The optimized results of the system reveal that the LP01 mode performs better with the non-return-to-zero modulation scheme at the 850 nm wavelength using a PIN photodiode.

Single-pixel optical modulation analyzer: a low-complexity frequency-dependent IQ imbalance monitor based on direct detection with phase retrieval.

Tiny mismatches in timing, phase, and/or amplitude between in-phase (I) and quadrature (Q) tributaries in an electro-optic IQ modulator, namely IQ imbalance, can severely affect high baud-rate and/or high modulation-order signals in modern coherent optical communications systems. To maintain such analog impairment within the tight penalty limit over wavelength and temperature during the product lifetime, in-service in-field monitoring and calibration of the IQ imbalance, including its frequency dependence, become increasingly important. In this study, we propose a low-complexity IQ monitoring technique based on direct detection with phase retrieval called a single-pixel optical modulation analyzer (SP-OMA). By reconstructing the optical phase information lost during the detection process computationally via phase retrieval, SP-OMA facilitates the in-service in-field monitoring of the frequency-dependent imbalance profile without sending dedicated pilot tones and regardless of any receiver/monitor-side IQ imbalance. The feasibility of SP-OMA is demonstrated both numerically and experimentally with a 63.25-Gbaud 16QAM signal.

High-speed nanoLEDs for chip-scale communication

Fast and efficient light generation and transport are at the heart of modern on-chip optical communication and information processing technologies. Next generation on-chip light sources must have a high modulation bandwidth and low energy consumption while maintaining a small footprint to be competitive. Enabled by metal-cladded nanocavities, fast subwavelength light emitters in the form of both lasers and LEDs have been analytically or experimentally demonstrated. From the modulation bandwidth perspective, nanolasers are ultimately limited by gain compression at high injection currents. From the energy efficiency perspective, nanolasers are inefficient due to the required high injection current to compensate for the losses in order to reach the lasing threshold. In contrast, nanoLEDs can simultaneously have Purcell effect enhanced speed, high energy efficiency, and output power that is above the thermal noise limit. This brief review aims to bolster, in a comparative approach, rationales of why nanoLEDs are a competitive alternative to nanolasers as light sources in chip-scale optical communication systems.

Spatial Jitter Influence on the Average BLER Performance of SIMO FSO Links over Atmospheric Turbulence Channels

In the recent years, Free Space Optics (FSO) technology has attracted significant research and commercial interest mostly because of its many advantages in comparison with other radio systems used for point-to-point connections. However, the reliable operation of these systems significantly depends on the conditions of the atmosphere in the area in which the optical beam propagates. The most important of these conditions are atmospheric turbulence and the misalignment between the optical beam and the receiver, which is also known as the pointing errors effect. In this work, in order to obviate the performance mitigation caused by these phenomena, we examined the most widely accepted and one of the most effective techniques, i.e., the implementation of receivers’ diversity. Various metrics have been investigated to evaluate the performance of such systems, but most of them do not take into account that the ultra-fast modern optical communication systems use blocks of bits for the transmission and codes for the detection and/or correction of erroneous bits. Thus, by taking these aspects into account, in this work, we investigated the combined impact of spatial jitter and atmospheric turbulence on the total average block error rate of an optical wireless system with receivers’ diversity. Novel closed-form analytical formulas were derived.

Compact Photonic Crystal Polarization Beam Splitter Based on the Self-Collimation Effect

We propose a new compact polarization beam splitter based on the self-collimation effect of two-dimensional photonic crystals and photonic bandgap characteristics. The device is composed of a rectangular air holes-based polarization beam splitting structure and circular air holes-based self-collimating structure. By inserting the polarization beam splitting structure into the self-collimating structure, the TE and TM polarized lights are orthogonally separated at their junction. When the number of rows in the hypotenuse of the inserted rectangular holes is 5, the transmittance of TE polarized light at 1550 nm is 95.4% and the corresponding polarization extinction ratio is 23 dB; on the other hand, the transmittance of TM polarized light is 88.5% and the corresponding polarization extinction ratio is 37 dB. For TE and TM polarized lights covering a 100 nm bandwidth, the TE and TM polarization extinction ratios are higher than 18 dB and 30 dB, respectively. Compared with the previous polarization beam splitters, our structure is simple, the size is small, and the extinction ratio is high, which meets the needs of modern optical communications, optical interconnection, and optical integrated systems.

Complex vector fitting toolbox: a software package for the modelling and simulation of general linear and passive baseband systems

Complex vector fitting (CVF) is a robust method to efficiently and accurately model general linear and passive baseband systems. Such models are important for the analysis and design of modern electronic and optical communication systems. This letter introduces an efficient toolbox implementation of the CVF algorithm. The effectiveness of the code is illustrated on a suitable application example.

Ultra-Compact Broadband In-Line Mode Converter Based on a Width-Modulated Silicon Waveguide

Mode division multiplexing (MDM) technology is becoming increasingly important for modern optical communication systems. Here, an ultra-compact broadband in-line mode converter for quasi-TE <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">00</sub> and quasi-TE <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">10</sub> on the silicon-on-insulator platform is proposed and demonstrated experimentally. In our device, the mode-conversion region consists of a continuously width-modulated waveguide with a footprint size as small as 1.32 × 4.52 μm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> . Its modulation profile is designed by using the particle swarm optimization algorithm. This device has a simulated conversion efficiency of about -0.174 dB and an insertion loss less than 0.153 dB within 100-nm wavelength bandwidth from 1500 nm to 1600 nm. Our design exhibits a favorable fabrication error tolerance and the fabricated device has achieved nearly the same conversion efficiency as the simulated one. Our concept can also be applied to design other high-performance mode converters, i.e., converting modes between quasi-TE <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">20</sub> and quasi-TE <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">00</sub> . Our work suggests a very promising path for realizing compact integrated MDM systems.

Low insertion loss optical isolator with widely tunable frequency

An optical isolator with a low insertion loss and high isolation is desirable for quantum networks and modern optical communication. Here, we realize an optical isolator with the far-off resonant Raman process in a thermal Λ-type atomic system. The experimental results show a high isolation, ultra-low insertion loss, and widely tunable frequency simultaneously. The maximum isolation is more than 30 dB with 0.07 dB insertion loss. And, the frequency of the isolation can be tuned continuously over 1.2 GHz. This high-performance magnetic-free optical isolator offers opportunities for applications in integrated optics and quantum networks.

IM/DD WDM-PON Communication System Based on Optical Frequency Comb Generated in Silica Whispering Gallery Mode Resonator

This article reports an implementation of a microsphere-based optical frequency comb (OFC) generator for substitution of individual laser arrays and simulates wavelength division multiplexed passive optical network (WDM-PON) based on this OFC generator. Our proposed generator is built based on silica microsphere, barely studied for fiber optical communication systems, and is a promising solution with photonic integration capability. Kerr OFC as a multiple light source containing more than 20 spectral carriers in the fundamental mode family in the C-band and beyond is demonstrated experimentally. Four of these OFC generator carriers with the highest peak power are studied in simulated 4-channel 393 GHz spaced WDM-PON. Additionally, we show this OFC as a source of optical carriers capable of providing data transmission over most utilized fiber types in modern optical communication systems, namely, single-mode fiber (SMF), non-zero dispersion-shifted fiber (NZ-DSF), and cut-off shifted fiber (CSF). We show through the simulations that error-free data transmission is possible, providing a total transmission capacity of 40 Gbit/s by using four OFC generated carriers.

Trusted Detector Noise Analysis for Discrete Modulation Schemes of Continuous-Variable Quantum Key Distribution

Discrete-modulated continuous-variable quantum key distribution protocols are promising candidates for large-scale deployment due to the large technological overlap with deployed modern optical communication devices. The security of discrete modulation schemes has previously analyzed in the ideal detector scenario in the asymptotic limit. In this work, we calculate asymptotic key rates against collective attacks in the trusted detector noise scenario. Our results show that we can thus cut out most of the effect of detector noise and obtain asymptotic key rates similar to those had we access to ideal detectors.

Controlling Defect-State Photophysics in Covalently Functionalized Single-Walled Carbon Nanotubes.

ConspectusSingle-walled carbon nanotubes (SWCNTs) show promise as light sources for modern fiber optical communications due to their emission wavelengths tunable via chirality and diameter dependency. However, the emission quantum yields are relatively low owing to the existence of low-lying dark electronic states and fast excitonic diffusion leading to carrier quenching at defects. Covalent functionalization of SWCNTs addresses this problem by brightening their infrared emission. Namely, introduction of sp3-hybridized defects makes the lowest energy transitions optically active for some defect geometries and enables further control of their optical properties. Such functionalized SWCNTs are currently the only material exhibiting room-temperature single photon emission at telecom relevant infrared wavelengths. While this fluorescence is strong and has the right wavelength, functionalization introduces a variety of emission peaks resulting in spectrally broad inhomogeneous photoluminescence that prohibits the use of SWCNTs in practical applications. Consequently, there is a strong need to control the emission diversity in order to render these materials useful for applications. Recent experimental and computational work has attributed the emissive diversity to the presence of multiple localized defect geometries each resulting in distinct emission energy. This Account outlines methods by which the morphology of the defect in functionalized SWCNTs can be controlled to reduce emissive diversity and to tune the fluorescence wavelengths. The chirality-dependent trends of emission energies with respect to individual defect morphologies are explored. It is demonstrated that defect geometries originating from functionalization of SWCNT carbon atoms along bonds with strong π-orbital mismatch are favorable. Furthermore, the effect of controlling the defect itself through use of different chemical groups is also discussed. Such tunability is enabled due to the formation of specific defect geometries in close proximity to other existing defects. This takes advantage of the changes in π-orbital mismatch enforced by existing defects and the resulting changes in reactivities toward formation of specific defect morphologies. Furthermore, the trends in emissive energies are highly dependent on the value of mod(n-m,3) for an (n,m) tube chirality. These powerful concepts allow for a targeted formation of defects that emit at desired energies based on SWCNT single chirality enriched samples. Finally, the impact of functionalization with specific types of defects that enforce certain defect geometries due to steric constraints in bond lengths and angles to the SWCNT are discussed. We further relate to a similar effect that is present in systems where high density of surface defects is formed due to high reactant concentration. The outlined strategies suggested by simulations are instrumental in guiding experimental efforts toward the generation of functionalized SWCNTs with tunable emission energies.

Data Transmission Based on Exact Inverse Periodic Nonlinear Fourier Transform, Part II: Waveform Design and Experiment

The nonlinear Fourier transform has the potential to overcome limits on performance and achievable data rates which arise in modern optical fiber communication systems when nonlinear interference is treated as noise. The periodic nonlinear Fourier transform (PNFT) has been much less investigated compared to its counterpart based on vanishing boundary conditions. In this paper, we design a first experiment based on the PNFT in which information is encoded in the invariant nonlinear main spectrum. To this end, we propose a method to construct a set of periodic waveforms each having the same fixed period, by employing the exact inverse PNFT algorithm developed in Part I. We demonstrate feasibility of the transmission scheme in experiment in good agreement with simulations and obtain a bit-error ratio of $10^{-3}$ over a distance of 2000 km. It is shown that the transmission reach is significantly longer than expected from a naive estimate based on group velocity dispersion and cyclic prefix length, which is explained through a dominating solitonic component in the transmitted waveform. Our constellation design can be generalized to an arbitrary number of nonlinear degrees of freedom.

Smart responsive organic microlasers with multiple emission states for high-security optical encryption.

Modern high-security cryptography and optical communication call for covert bit sequences with high coding capacity and efficient authentication. Stimuli-responsive lasing emissions with easily distinguishable readout are promising in the coding field as a novel cryptographic primitive, while the application is frequently restricted by the limited number of emission states. Here, we report a strategy of achieving multiple competitive lasing signals in responsive organic microspheres where a donor–acceptor pair was introduced. The competitive lasing from the donor and acceptor was reversibly switched by modulating the competition between the radiative rate of the donor and the rate of energy transfer, and the generated multiple lasing signals enabled a quaternary coding for recognizable cryptographic implementation. Data encryption and extraction were demonstrated using a 4 × 4 microlaser array, showing vast prospects in avoiding the disclosure of security information. The results offer a comprehensive understanding of excited-state dynamics in organic composite materials, which may play a major role in high-security optical recording and information encryption.

Photon Subtraction-Induced Plug-and-Play Scheme for Enhancing Continuous-Variable Quantum Key Distribution with Discrete Modulation

Establishing high-rate secure communications is a potential application of continuous-variable quantum key distribution (CVQKD) but still challenging for the long-distance transmission technology compatible with modern optical communication systems. Here, we propose a photon subtraction-induced plug-and-play scheme for enhancing CVQKD with discrete-modulation (DM), avoiding the traditional loopholes opened by the transmission of local oscillator. A photon subtraction operation is involved in the plug-and-play scheme for detection while resisting the extra untrusted source noise of the DM-CVQKD system. We analyze the relationship between secret key rate, channel losses, and untrusted source noise. The simulation result shows that the photon-subtracted scheme enhances the performance in terms of the maximal transmission distance and make up for the deficiency of the original system effectively. Furthermore, we demonstrate the influence of finite-size effect on the secret key rate which is close to the practical implementation.

Joint Superchannel Digital Signal Processing for Effective Inter-Channel Interference Cancellation

Modern optical communication systems transmit multiple frequency channels, each operating very close to its theoretical limit. The total bandwidth can reach 10 THz limited by the optical amplifiers. Maximizing spectral efficiency, the throughput per bandwidth is thus crucial. Replacing independent lasers with an optical frequency comb can enable very dense packing by overcoming relative drifts. However, to date, interference from non-ideal spectral shaping prevents exploiting the full potential of frequency combs. Here, we demonstrate comb-enabled multi-channel digital signal processing, which overcomes these limitations. Each channel is detected using an independent coherent receiver and processed at two samples-per-symbol. By accounting for the unique comb stability and exploiting aliasing in the design of the dynamic equalizer, we show that the optimal spectral shape changes, resulting in a higher signal-to-noise ratio that pushes the optimal symbol rate towards and even above the channel spacing, resulting in the first example of frequency-domain super-Nyquist transmission with multi-channel detection for optical systems. The scheme is verified both in back-to-back configuration and in single span transmission of a 21 channel superchannel originating from a 25 GHz-spaced frequency comb. By jointly processing three wavelength channels at a time, we achieve spectral efficiency beyond what is possible with independent channels. At the same time, one significantly relaxes the hardware requirements on digital-to-analog resolution and bandwidth, as well as filter tap numbers. Our results show that comb-enabled multi-channel processing can overcome the limitations of classical dense wavelength division multiplexing systems, enabling tighter spacing to make better use of the available spectrum in optical communications.

Hard-Decision Coded Modulation for High-Throughput Short-Reach Optical Interconnect.

Coded modulation (CM), a combination of forward error correction (FEC) and high order modulation formats, has become a key part of modern optical communication systems. Designing CM schemes with strict complexity requirements for optical communications (e.g., data center interconnects) is still challenging mainly because of the expected low latency, low overhead, and the stringent high data rate requirements. In this paper, we propose a CM scheme with bit-wise hard-decision FEC and geometric shaping. In particular, we propose to combine the recently introduced soft-aided bit-marking decoding algorithm for staircase codes (SCCs) with geometrically-shaped constellations. The main goal of this CM scheme is to jointly boost the coding gain and provide shaping gain, while keeping the complexity low. When compared to existing CM systems based on M-ary quadrature-amplitude modulation (MQAM, ) and conventional decoding of SCCs, the proposed scheme shows improvements of up to dB at a bit-error rate of in the additive white Gaussian noise channel. For a nonlinear optical fiber system, simulation results show up to reach increase. In addition, the proposed CM scheme enables rate adaptivity in single-wavelength systems, offering six different data rates between 450 Gbit/s and 666 Gbit/s.

Study of impact of art performance level of blue laser technology applications and its control

&lt;p&gt;&lt;span&gt;In this work; we present an enhancement in blue laser diodes with new factors and applications for modern technology such as underwater telecommunications, bio-sensor and bio-medical systems etc. Years of advance meanwhile have much enhanced laser performance, and extremely improved their diversity, making lasers significant parts in scientific research, telecommunications, engineering, bio-medical imaging, materials working, and a swarm of other applications. This article viewing how laser technology has progressed to chance application requirements. The enhanced blue laser building diagrams to get a peak efficiency% at room temperature with modification. Moreover, we have as well estimated electro-optical performance packing of blue laser diodes been significantly various associated to GaAs laser method and novel developments and performances are required to enhance the optical power from anther laser diodes. Researchers need enhanced approaches to accurately make new the blue laser applications to use control of modern experimental measurements and optical communication.&lt;/span&gt;&lt;/p&gt;

Influence of Average Cavity Dispersion and Spectral Bandwidth on Passively Harmonic Mode Locked L-Band Er-Doped Fiber Laser

We systematically study the impact of average cavity dispersion and pulse spectral bandwidth on harmonic mode locking in the long-wavelength band from an Er-doped fiber laser using carbon nanotubes polyvinyl alcohol (CNTs-PVA) film mode locker. By carrying out pulse energy management through optimizing the average cavity dispersion and optical spectral bandwidth, 2.08 GHz repetition rate corresponding to 201st harmonic with 36.5 dB side mode suppression ratio (SMSR) can be realized under 205 mW pump power at 1597.53 nm. Furthermore, we systematically investigate the characteristics of the harmonically mode locked ultrashort optical pulses with different spectral bandwidths versus pump power under fixed cavity dispersion first. Key laser parameters have been studied including pumping efficiency, duration, energy, SMSR, and time bandwidth product. Enlightened by the experimental results, a simple law on preliminary and fast judgment of pulses frequency under fixed pump power is proposed, namely, by monitoring the pulse spectral bandwidth. The laser source featuring high repetition rate and L-band operation is greatly sought-after in some specific applications such as modern optical communication system etc.

A Universal Specification for Multicore Fiber Crosstalk

In order to transition multi-core fiber (MCF) technologies from their research state to volume production, the key design specifications have to be broadly agreed upon, first and foremost an acceptable level of inter-core crosstalk per unit length. Against common belief, we show that MCF crosstalk requirements per unit length are fairly independent of transmission distance in the context of modern coherent optical communication systems. As a consequence, a single value for the tolerable inter-core crosstalk per unit length can be used to specify MCFs, valid from metropolitan (~100 km) to trans-pacific (~10 000 km) deployment scenarios. The notion of a universal inter-core crosstalk specification allows for application-independent MCF designs (including a distance-independent optimum core density) and will facilitate the standardization and volume manufacturing of MCF.