Mixture Of Extracts Research Articles

Experimental-analytical study of the process of ultrasonic extraction of inulin from jerusalem tubers

Significant place in the range of functional foods occupied by food products containing inulin, which is used all over the world as a food product for dietary and diabetic nutrition, a prebiotic, a structure- and flavor-forming agent. Jerusalem artichoke tubers are the raw material for the production of inulin. The article discusses the use of ultrasonic radiation as an effective method for accelerating the process of extracting inulin from Jerusalem artichoke tubers and increasing its yield. This approach to the extraction process makes it possible not only to reduce the duration of the technological operation, but also to significantly increase the specific yield of the target components. The technical design of the extractor using ultrasonic radiation has been recommended and a rational mode of its operation has been developed. As a result of mathematical processing of the experimental results, approximating dependences of the specific productivity on the influencing parameters were obtained, an analysis was performed and fields of values of the specific productivity of the process of ultrasonic extraction of inulin were constructed. For implementation in industry, the following option for performing the extraction stage is proposed: the formation of an extraction mixture by mixing the pulp with water in the pulp:water hydromodulus ratio from 1:4 to 1:8, the extraction is carried out for 20-60 minutes using ultrasonic influence with a frequency of 22 kHz and intensity of 50 W/cm2 per extraction mixture weighing 2.5 - 13.5 kg with mechanical stirring of the extraction mixture at a speed of 15-30 rpm and its circulation stirring with a circulation rate of 20..30 volumes/hour at a mixture temperature of 313 - 353 In this case, the specific productivity will be 4.708 – 14.566 kg/(m3 h).

Development of Kopasanda Leaves Extract (Chromolaena odorata (L.)) Phytosome Using Solvent Evaporation Method.

Kopasanda (Chromolaena odorata (L.) R.M.King &H.Rob) or siam weed exhibited various pharmacological activities such as anticancer, antidiabetic, and wound healing activities. The phenolic content of kopasanda leaf extract was high in the range of 56.15 mg GAE/g-242.3 mg GAE/g. But, it reported that phenolic compounds exhibited poor bioavailability because of their physicochemical properties. The phytosomes system improves the effectiveness of phytoconstituents. Aims of the research as prepare and evaluate the phytosome from kopasanda leaf extract. Kopasanda dried leaves were extracted by the sonication method. The solvent evaporation method was used in the phytosome preparation with various concentrations between extract and phospholipid ( 2:1; 1:1; 1:2; and 1:3). Furthermore, phytosome formation was analyzed for its entrapment efficiency, Polydispersity Index (PDI), particle size, spectroscopy infra-red (IR), and Transmission Electron Microscope (TEM) method. The total phenolic content (TPC) of crude was 110.969 ± 0.752 mgGAE/g. The optimum phytosome was gained with a concentration between extract and phospholipid (1:3). It resulted in the entrapment efficiency of 99.930 ± 0.001%, particle size, and polydispersity index equal to 206.5 ± 8.613nm and 0.528 ± 0.038. The morphology of the phytosome was spherical and the phytosome formation was verified by the IR spectrum by comparing the phytosome and the physical mixture of extract and phospholipid. The results obtained showed that phytosome containing kopasanda leaf extract was formed using the solvent evaporation method.

Optimized HPLC-UV Methodology for the Simultaneous Quantification of Multiple Preservatives in Jordanian Yogurt Products

A method based on high-performance liquid chromatography with a UV detector (HPLC-UV) was developed for the simultaneous determination of sorbic acid, benzoic acid, and natamycin in yogurt. The method does not require time-consuming, labor-intensive pre-treatment processes or complicated procedures. Using a C18 150 mm × 4.6 mm, 3.0 µm column (Roc) at 25 °C, the target analytes were separated within 5 minutes with high sensitivity and selectivity. The mobile phase consisted of trifluoroacetic acid (0.1%) in water containing 100 mM sodium acetate, trifluoroacetic acid (0.1%) in acetonitrile, and trifluoroacetic acid (0.1%) in tetrahydrofuran, in a ratio of 70:20:10 (v/v). Using this mobile phase as an extraction mixture, recoveries ranged from 83.0% to 110.2% at spike levels between 2.5 µg/kg and 80.0 µg/kg. The relative standard deviations (RSDs) for these recoveries were below 10%. Intra-day precision and inter-day precision varied from 5.3% to 6.7% and 7.6% to 9.2%, respectively. Additionally, the limits of detection (LOD) were between 0.24 and 0.61 mg/L, and the limits of quantification (LOQ) ranged from 0.80 to 2.0 mg/L for sorbic acid, benzoic acid, and natamycin. Principal component analysis revealed that yogurt type had the greatest positive influence on preservative concentration, while the weight or volume of the yogurt package had the greatest negative influence.

Inhibitory Effects of Polyphenols from Equisetum ramosissimum and Moringa peregrina Extracts on Staphylococcus aureus, Collagenase, and Tyrosinase Enzymes: In vitro Studies

Background: Skin problems caused by oxidative stress lead to the activation of collagenase and tyrosinase enzymes, contributing to skin aging, discoloration, and infections. Equisetum ramosissimum and Moringa peregrina were assessed for their potential uses in treating various skin conditions. Objective: The present research aimed to investigate the positive effects of polyphenols in Equisetum ramosissimum and Moringa peregrina extracts as potential cosmetic products for the treatment of different skin conditions. Methods: Total phenolic and flavonoid contents, antioxidants, and anti-collagenase and anti-tyrosinase activities of plant extract mixtures (PEM) at different ratios of (M. peregrina: E. ramosissimum) were determined using standard procedures. Inhibitory effects of PEM against acne-causing Staphylococcus aureus (ATCC 29213) were evaluated using the diameter (cm) of the inhibition zone method. A cream formulation containing PEM was developed and characterized for stability and potential skin irritation in rats using standard procedures. Results: The PEM at a ratio of (2:1) showed the highest total phenolic and flavonoid content (150.15 ± 2.8 mg/g, equivalent to gallic acid, and 41.5 ± 1.2 mg/g, equivalent to quercetin, respectively). Antioxidant activities for PEM (2:1) were also optimal, as determined by the DPPH and ABTS methods (IC50 = 7.06 ± 0.12 µg/mL and 53.29 ± 3.3 µg/mL, respectively). Furthermore, PEM (2:1) exhibited superior inhibitory activities against collagenase and tyrosinase enzymes (IC50 = 32.4 ± 1.19 µg/mL and 8.4 ± 1.19 µg/mL, respectively). Antimicrobial activity of PEM (2:1) tested on S. aureus showed the largest zone of growth inhibition (2.8 cm) at a concentration of 60 mg/mL. Studies on the PEM (2:1) cream formulation revealed that it remained stable under room conditions. Skin irritation tests on rats showed no signs of oedema or erythema after treatment. Conclusion: The PEM with a ratio of (2:1) demonstrated optimal activity as an oxidative stress-neutralizing agent, inhibitor of enzymes responsible for skin aging and hyperpigmentation, and antibacterial agent. The cream formulation containing PEM exhibited physical stability and no detectable risk of skin irritation throughout the research procedures.

Comparative Evaluation of Antimicrobial Efficacy of Silver Nanoparticles Infused with Azadirachta indica Extract and Chlorhexidine Against Red-complex Pathogens.

The present study aimed to evaluate the antimicrobial efficacy of silver nanoparticles infused with Azadirachta indica extract and chlorhexidine against red-complex periopathogens. Neem leaf extraction was done followed by standardization to the synthesis of neem-infused silver nanoparticles and fractionation of compounds done by using thin layer chromatography to separate the mixture of neem leaf extract. Characterization of neem-infused silver nanoparticles was done by scanning electron microscopy and UV-Visible spectroscopy. The compound identified in neem-infused silver nanoparticles was gedunin which was confirmed by Fourier transform infrared spectroscopy and nuclear magnetic resonance spectroscopy. Determination of antibacterial activity done by disc diffusion, minimum inhibitory concentration (MIC), and minimum bactericidal concentration (MBC) methods. Group I-99% ethanolic extract, group II-neem-infused silver nanoparticles (NAgNPs), group III-chlorhexidine. The relative inhibitory zone value for Tannerella forsythia (180) in neem-infused silver nanoparticles (group II) was greater when compared with other periopathogens Porphyromonas gingivalis (133) and Treponema denticola (160) than 99% ethanolic extract (group I), chlorhexidine (group III). Neem-infused silver nanoparticles (group III) showed superior antimicrobial activity against T. forsythia (19.3 ± 31.1547) and T. denticola (18±0) when compared with P. gingivalis (17.6 ± 0.5774). On evaluating MIC and minimum bacterial concentrations, P. gingivalis is more resistant than other pathogens in neem-infused silver nanoparticles (group III). Neem-infused silver nanoparticles exhibited superior antibacterial activity as compared with gold-standard chlorhexidine against red-complex periodontal pathogens. For MIC and MBC all the three periopathogens were effective but P. gingivalis was more resistant. Antibiotics are effective against many drug-resistant bacteria. As a ready-made medicine, they can be used to treat many infections. Silver nanoparticles in drug delivery systems generally increase solubility, stability, and biodistribution, thereby increasing their effectiveness. Green synthesis using plant extracts as precursors to synthesize nanoparticles has proven to be environmentally non-hazardous combined with remarkably improved efficacy against bacterial and viral diseases. So neem-infused silver nanoparticles can be utilized as a drug delivery system. Hence, it can be used as a potential antibacterial ingredient in formulations for periodontal use like mouthwashes and gels for local drug delivery. How to cite this article: Krishnappan S, Ravindran S, Balu P, et al. Comparative Evaluation of Antimicrobial Efficacy of Silver Nanoparticles Infused with Azadirachta indica extract and Chlorhexidine Against Red-Complex Pathogens. J Contemp Dent Pract 2024;25(6):547-553.

Increased formation of brominated disinfection by-products and toxicities during low-H2O2-mediated ozonation of reclaimed water

Reusing reclaimed water requires stringent disinfection but inevitably generates disinfection by-products (DBPs). H2O2/O3 treatment is an efficient and environmentally benign disinfection method. For the first time, our bioassay results elucidate that low H2O2/O3 ratio (molar) treated water increased unignorable toxicity effect compared to that of the high H2O2/O3 ratio. To clarify this finding, individual organic brominated DBPs (Br-DBPs), bromate, and adsorbable organic bromine (AOBr) were considered due to their potential risk. Organic Br-DBPs were mainly generated from ozone-induced pathways. Individual organic Br-DBPs were not the primary concern in this scenario because they are typically only produced in observable quantities at bromide concentrations exceeding 500 μg/L, and even then, they often remain below detection limits when treated with H2O2/O3. On the contrary, both bromate and AOBr were detectable at low H2O2/O3 ratios. Furthermore, bromate is produced from HOBr and bromine radicals induced by HO•. Moreover, bromate formation was promoted because of increased HO• formation, particularly at H2O2/O3 ratios <0.24. To prevent HO•-induced pathways from being dominant, higher H2O2/O3 ratios (>0.48) were required. Toxicity assays revealed that AOBr-included organic extracts of ozonated reclaimed water induced more toxic effects. The toxicity induced by the organic fraction resulted from its decreased oxidation level, which was, in turn, driven by the increased formation of bromate. Enhanced toxicity effects were observed when cells were exposed to a bromate and organic extract mixture. It indicates that both the AOBr and bromate present in low-H2O2-O3-treated reclaimed water pose potential risks, and their coexistence further elevates these risks. Increasing the H2O2/O3 ratio markedly decreased the generation of intracellular oxidative substances and oxidative damage. In conclusion, when treated with H2O2/O3, shifting from HO•-induced pathways to ozone-induced pathways by a relatively high H2O2/O3 ratio decreased the amounts of DBPs produced and controlled the toxic effects to ensure the safety of ozonated reclaimed water.

Separation and recovery of uranium and beryllium from acidic sulphate solutions by solvent extraction using mixture of organophosphonic extractants

Separation and recovery of uranium and beryllium from acidic sulphate solutions by solvent extraction using mixture of organophosphonic extractants

Coexistence between Xylella fastidiosa Subsp. pauca and Susceptible Olive Plants in the Salento Peninsula (Southern Italy)

Olive Quick Decline Syndrome (OQDS) associated with Xylella fastidiosa subsp. pauca is one of the most destructive diseases of olive trees in the Salento Peninsula (Southern Italy), particularly on the cultivars Cellina di Nardò and Ogliarola Salentina. This study proposes the NuovOlivo protocol as a management strategy to permit coexistence between X. fastidiosa subsp. pauca and olive drupes and extra-virgin oil production. Thirty-two private olive orchards affected by OQDS and cultivated following the standard agronomic techniques in use in the area were surveyed during the 2019–2023 olive-growing seasons. Tested cultivars included Cellina di Nardò, Ogliarola Salentina, Coratina, Ascolana Tenera, Nociara, Leccino, and Bella di Cerignola. At the beginning of the protocol application, the susceptible plants showed OQDS symptom severity of 40–80% and did not produce olives or oil, while the resistant(?)/tolerant cultivars exhibited a 2–8% leaf scorch and a drupe production less than 1–2 kg/plant. After the removal of dry branches in January–February, plants were sprayed two times per year (preferably in March and October) with NuovOlivo®, a mixture of aqueous botanical extracts esterified in the presence of sodium hydroxide with vegetable oils and activated at the time of use with sodium bicarbonate. In all the orchards, a slow-release fertilizer was distributed, and weeds were controlled by mowing or chopping. Upon eventual appearance, the dry twigs were removed. Treated olive trees produced new vegetation, rebuilt their foliage, reduced OQDS symptoms, and turned out cluster inflorescence and drupes. The drupes yield was 6.67–51.36 kg per plant, with an average of 13.19% in extra-virgin olive oil (free acidity 0.01–0.2%). Plants used as controls showed OQDS symptoms and were unproductive, and newly formed shoots were desiccated. The proposed protocol promotes, supports, and restores new vegetation, flowers, fruits, and oil production of the treated olive plants affected by OQDS without losing susceptible olive plants. The Apulian landscape and economy, based on olive presence and production, could be also safeguarded.

Dynamic tests of cesium-137 recovery from the Mayak model alkaline HLW using &lt;i&gt;p&lt;/i&gt;-isononylcalix[6]arene based extractant

The article presents the results of studies on composition optimization, properties, and laboratory dynamic tests of extraction mixtures based on p-isononylcalix[6]arene for the alkaline HLW purification to remove 137Cs. The distribution of 137Cs among the products of the technological scheme is presented and the coefficients of raffinate purification to remove 137Cs are determined. It was revealed that, in the case of using nitric acid as a stripping solution, nitrosation of p-isononylcalix[6]arene is possible in the technological process. The composition of the resulting product was determined. To prevent nitrosation of p-isononylcalix[6]arene, formic acid was used in the stripping stage, which ensured stable operation of the extraction stand for 48 h with 137Cs extraction from model alkaline HLW at a level of 99.7%.

Effect of UV Radiation and Temperature on Radical Scavenging Activity of Hippophaë rhamnoides L. and Vaccinium oxycoccos L. Fruit Extracts.

New active ingredients, including those of plant origin, which could protect the skin against various harmful factors, such as UV radiation and free radicals responsible for skin ageing, are still being sought. The present study was focused on the antioxidant activity of Hippophaë rhamnoides L. and Vaccinium oxycoccos L. fruit glycolic extracts. Investigations were also carried out to evaluate the effect of UVA radiation and the storage of the sea buckthorn and European cranberry extracts at an elevated temperature of 50 °C on their interactions with free radicals. The kinetics of the interactions of the extracts with DPPH were assessed using electron paramagnetic resonance (EPR) spectroscopy. The sea buckthorn and European cranberry extracts quench the EPR signal of DPPH free radicals, which indicates their antioxidant potential. The EPR method further showed that a mixture of sea buckthorn and cranberry extracts in a volume ratio of 2:1 was more potent in quenching free radicals compared to a mixture of these extracts in a ratio of 1:2. Our findings demonstrate that long-term UVA radiation exposure reduces the ability of sea buckthorn and cranberry extracts to interact with free radicals. Moreover, storage at elevated temperatures does not affect the interaction of sea buckthorn extract with free radicals, while it alters the ability of cranberry extract to interact with free radicals. This study has demonstrated that an important factor in maintaining the ability to scavenge radicals is the storage of raw materials under appropriate conditions. H. rhamnoides and V. oxycoccos extracts can be used as valuable raw materials with antioxidant properties in the pharmaceutical and cosmetic industries.

Evaluation of the Impact of a Fertilizer Mixture from Plant Extracts and Urea on Corn Yield in Vietnam

This study evaluates the impact of a fertilizer mixture combining plant extracts and urea on the growth and yield of NK54 maize in Vietnam. The experimental design included five treatments with different combinations of urea and plant extracts, compared against a control treatment. Growth parameters such as plant height, leaf number, leaf area, and leaf area index (LAI) were monitored throughout the growing season. The results indicated that the application of urea-coated plant extracts significantly improved growth duration, plant height, and leaf development compared to conventional urea fertilization. Specifically, treatments using the urea-plant extract mixture achieved higher plant heights and leaf area, with Treatment T3 (9 ml concentrated extract + 1 kg Urea) showing the highest theoretical and actual yields. The theoretical yield ranged from 63.62 to 68 q/ha, and the actual yield ranged from 43.7 to 48.4 q/ha, with Treatment T3 consistently outperforming others. The findings suggest that integrating plant extracts with urea can enhance maize growth and yield, highlighting the importance of optimizing fertilization strategies for improving crop productivity.

A Spironolactone-Based Prototype of an Innovative Biomedical Patch for Wound Dressing Applications.

The electrospinning process is an effective technique for creating micro- and nanofibers from synthetic and natural polymers, with significant potential for biomedical applications and drug delivery systems due to their high drug-loading capacity, large surface area, and tunable release times. Poly(L-lactic acid) (PLLA) stands out for its excellent thermo-mechanical properties, biodegradability, and bioabsorbability. Electrospun PLLA nanofibrous structures have been extensively investigated as wound dressings, sutures, drug delivery carriers, and tissue engineering scaffolds. This study aims to create and characterize electrospun PLLA membranes loaded with spironolactone (SP), mimicking active compounds of Ganoderma lucidum (GL), to develop a biodegradable patch for topical wound-healing applications. GL, a medicinal mushroom, enhances dermal wound healing with its bioactive compounds, such as polysaccharides and ganoderic acids. Focusing on GL extracts-obtained through green extraction methods-and innovative drug delivery, we created new fibers for wound-healing potential applications. To integrate complex mixtures of bioactive compounds into the fibers, we developed a prototype using a single pure substance representing the extract mixture. This painstaking work presents the results of the fabricating, wetting, moisture properties, material resilience, and full characterization of the product, providing a robust rationale for the fabrication of fibers imbued with more complex extracts.

Light-emitting diode irradiation at 590nm combined with active substances modulates ultraviolet B radiation-induced keratinocyte inflammation.

To evaluate the efficacy of yellow light-emitting diode (LED) irradiation at 590 nm, alone or in combination with anti-inflammatory active substances against ultraviolet (UV)-induced inflammation in keratinocytes. HaCaT keratinocytes were pretreated with LED yellow light (590 nm) alone or in combination with an antiinflammatory active substance such as glycerophosphoinositol choline (GC), extract of grains of paradise (Aframomum melegueta Schum, AM), or a bisabolol and ginger root extract mixture (Bb-GE) before UVB irradiation. Following each treatment, we measured the levels of inflammatory mediators secreted by keratinocytes. HaCaT keratinocytes treated with UVB (300mJ cm-²) and then cultured for 24h exhibited significantly upregulated expression of proinflammatory factors, including interleukin (IL)-1α, prostaglandin E2 (PGE2), and IL-8. After pretreatment with 590nm LED, UVB-induced inflammatory responses were significantly inhibited. Co-pretreatment with 590nm LED irradiation and GC further inhibited the expression of IL-1α and IL-8. IL-8 expression was inhibited by co-pretreatment with 590nm LED irradiation and AM, whereas PGE2 expression was inhibited by co-pretreatment with 590nm LED irradiation and Bb-GE. Co-treatment with 590nm LED irradiation and various active substances modulated UVB-induced inflammation in keratinocytes, suggesting the potential application of this approach to prevent damage caused by voluntary sun exposure in daily life.

Two-Step Macromolecule Separation Process with Acid Pretreatment and High-Shear-Assisted Extraction for Microalgae-Based Biorefinery

A simple two-stage extraction and recovery method for macromolecules from microalgae biomass, termed CASS (concentrating the microalgae solution, acid pretreatment, high-shear-assisted lipid extraction, and separation), was developed. This method effectively processed the wet biomass of Chlorella sp. ABC-001 at a moderately low biomass concentration (50 g/L). The optimal conditions were acid pretreatment with 5 wt.% H2SO4 at 100 °C for 1 h, followed by high-shear extraction using hexane at 3000 rpm for 30 min. The acid pretreatment hydrolyzed carbohydrates and phospholipids, disrupting the cell wall and membrane, while high-shear mixing enhanced mass transfer rates between solvents and lipids, overcoming the hydraulic barrier at the cell surface. Within 10 min after completing the process, the extraction mixture achieved natural phase separation into water, solvent, and biomass residue layers, each enriched with carbohydrates, lipids, and proteins, respectively. The CASS process demonstrated high esterifiable lipid yields (91%), along with substantial recovery of glucose (90%) and proteins (100%). The stable phase separation prevented emulsion formation, simplifying downstream processing. This study presents the results on cell disruption, optimal acid treatment concentration, and high-shear mixing to achieve macromolecule separation, expanding the lipid-centric microalgal process to a comprehensive biorefinery concept.

Influence of a Mixture of Microbiology (Bacteria and Fungi) and Marine Alga Extracts on Some Growth Characteristics of Strawberry (cv. Roby Gem)

Influence of a Mixture of Microbiology (Bacteria and Fungi) and Marine Alga Extracts on Some Growth Characteristics of Strawberry (cv. Roby Gem)

PSIV-22 Use of a mixture of olive pomace extract, a palatability enhancer and tributyrin as feed additive on the recovery of unweaned dairy beef calves with pneumonia at farm arrival

PSIV-22 Use of a mixture of olive pomace extract, a palatability enhancer and tributyrin as feed additive on the recovery of unweaned dairy beef calves with pneumonia at farm arrival

Effect of pH neutral on the separation of nickel and cobalt from laterite leaching solution using cyanex 272

Abstract Nickel and cobalt are the most common elements in the earth’s crust that naturally occur in laterite ores. Nickel and cobalt from laterite ores are recovered as products such as mixed hydroxide precipitate (MHP) and mixed sulphide precipitate (MSP). This research focuses on how the nickel laterite leach solution can be processed directly for solvent extraction without going through the precipitation stage. The nitric acid leach solution obtained from the laterite ore is used to extract nickel and cobalt. A cyanex 272 extractant and kerosene mixture will be used as an organic solvent for direct extraction. The raw material used was Indonesian laterite ore from Halmahera Island, which contained Ni (1.72%), Co (0.155%), Fe (26.17%), and other minor elements. The effect of pH in a neutral condition was investigated on the extraction efficiency, distribution coefficient, and separation factor. Nitric acid (1M) was applied as the leaching reagent. The variables include pH variations (6.8; 7.0; 7.2; 7.4; 7.6), 20% cyanex 272, and O/A ratio (1:1/v:v) at 20 minutes with a stirring speed of 500 rpm. Optimum results were obtained at pH 7.4 variation with an extraction efficiency of 69.26% for cobalt and 0% for Ni, respectively. At these optimum conditions, the highest distribution coefficient value is the element cobalt at pH 7.4, and the result is 2.253 with a separation factor (∞). The optimum condition focuses on removing cobalt from the organic phase, not nickel.

Antibacterial and cytotoxicity properties of a polyherbal mouthwash containing Achyranthes aspera and Trachyspermum ammi against selected periodontal pathogens

BackgroundChlorhexidine (CHX) is considered as a gold standard for its antibacterial efficacy and substantivity in chemical plaque control. However, some adverse effects are associated with its prolonged use. Herbal medicines like Achyranthes aspera and Trachyspermum ammi have been used in many clinical conditions, and they appear to be a valuable substitute next to CHX in the management of periodontal diseases. ObjectiveThis in vitro study was designed to assess and compare the antibacterial potential and cytotoxic effects of novel polyherbal mouthwash containing A. aspera and T. ammi with 0.2% CHX mouthwash against Porphyromonas gingivalis, Tannerella forsythia, and Aggregatibacter actinomycetemcomitans. MethodsEthanolic extracts of A. aspera and T. ammi were prepared by the Soxhlet apparatus method and were subjected to preliminary phytochemical screening. The individual plant extracts and the plant extract mixture (PEM) of A. aspera and T. ammi in the ratio of 1:1, 2:1, 1:2 (w/v) were assessed for minimum inhibitory concentration (resazurin microtitre assay) and minimum bactericidal concentration (spread plating method) against selected periodontal pathogens in comparison to CHX. The polyherbal mouthwash was assessed for zone of inhibition (well diffusion method) and cytotoxicity (MTT assay) on adult human gingival fibroblasts. All the experiments were performed in triplicate. ResultsThe antibacterial activity was evident in the PEMs, and polyherbal mouthwash against tested periodontal pathogens and was comparable to CHX. The cytotoxicity assay findings confirmed that polyherbal mouthwash exhibited 82.1% of surviving cells which proved good biocompatibility. ConclusionA. aspera and T. ammi based mouthwash possess comparable antibacterial activity against periodontal pathogens when compared to CHX.

Simplified Synthesis of Poly(ethyleneimine)-Modified Silica Particles and Their Application in Oligosaccharide Isolation Methods.

There are great challenges in the field of natural product isolation and purification and in the pharmacological study of oligosaccharide monomers. And these isolation and purification processes are still universal problems in the study of natural products (NPs), traditional Chinese medicine (TCM), omics, etc. The same polymer-modified materials designed for the special separation of oligosaccharides, named Sil-epoxy-PEI and Sil-chloropropyl-PEI, were synthesized via two different methods and characterized by scanning electron microscopy combined with energy spectrum analysis, Fourier transform infrared spectroscopy, thermogravimetric analysis, zeta potential as well as surface area analysis, etc. Several nucleotide/nucleoside molecules with different polarities and selectivities were successfully isolated in our laboratory using stainless-steel columns filled with the synthesized material. In addition, the separation of saccharide probes and oligosaccharides mixtures in water extracts of Morinda officinalis were compared in HILIC mode. The results showed that the resolution of separations for the representative analytes of the Sil-epoxy-PEI column was higher than for the Sil-chloropropyl-PEI column, and the developed stationary phase exhibited improved performance compared to hydrothermal carbon, amide columns and other HILIC materials previously reported.

Exploring the Potential of the Mixture of Alginate and Aqueous Plant Extracts as Functional Drinks for Diabetics

Diabetes, which affects millions of people every year, has led to a functional food development for diabetics. This study aimed to explore the potential of functional drinks made of a mixture of alginate and aqueous plant extracts to treat diabetics. Samples studied, were 1% alginate solution (alginate drink), aqueous plant extracts, and functional drinks consisting of a mixture of alginate-plant extracts. Those functional drinks were made from okra aqueous extract, moringa leaf aqueous extract, bay leaf aqueous extract, and guava leaf aqueous extract, each of which was mixed with alginate. The samples were analyzed for qualitative phytochemical content, dietary fiber content, total phenolic content, alpha-glucosidase inhibition, and antioxidant capability. The phytochemical content of functional drinks showed differences in color intensity and types of phytochemicals. Saponins were identified in all the drinks. The high phenolic and dietary fiber content was shown by a drink of alginate - moringa leaf extract mixture. High alpha glucoside inhibitors and antioxidant activity were shown by drinks prepared from a mixture of alginate-bay leaf extract and a mixture of alginate-guava leaf extract. Overall, drinks from a mixture of alginate-bay leaf extract and a mixture of alginate-guava leaf extract had the potential to be used to treat diabetes.