Phase Microscopy Research Articles

PREPARATION OF VERMICULITE AND POLYPOLYACRYLONITRILE COMPOSITE AND ITS MODIFICATION WITH DIETHANOLAMINE

Abstract: This article studied the characteristics of vermiculite sourced from the Tebinbulok mine situated within the borders of the Republic of Uzbekistan, as well as the most favorable conditions for its activation through heating and treatment. A 7% solution of hydrochloric acid was used for activation. Activated vermiculite was modified using maleic anhydride and polyacrylonitrile dissolved in acetic acid solution. The properties of the resulting composite were studied. To further increase its sorbent properties, diethanolamine with an amine functional group was added to the composite. A laboratory study of the obtained organicinorganic composite is presented. The research was carried out in the state connected to the reflux cooler, at a temperature of 60-70ºC, with constant stirring. The properties, microstructure, porosity, thermal tolerance, and composition of the samples were analyzed using traditional and empirical methods of physical and chemical analysis, respectively, and IRTracer-100 SHIMADZU (Japan), infrared IR-Fourier, MIRA 2 LMU scanning electron microscope (SEM), elemental analysis, thermogravimetric (TGA and DTA) analysis, and X-ray phase analysis were studied. The results showed that after activation, vermiculite, which is almost chemically stable, was bound to polyacrylonitrile through the OH¯ bonds formed in it, and maleic anhydride acted as a modifier in the binding, polyacrylonitrile vermiculite polymerized in solution It was proved by analysis that it formed one composite with OH- bonds formed on its surface. To further increase the sorption capacity of this composite with maleic anhydride as a binder, diethanolamine containing an amine functional group was added to it.

Demonstration of a photonic integrated circuit for quantitative phase imaging

Quantitative phase imaging (QPI) is an optical microscopy method that has been developed over nearly a century to rapidly visualize and analyze transparent or weakly scattering objects in view of biological, medical, or material science applications. The bulky nature of the most performant QPI techniques in terms of phase noise limits their large-scale deployment. In this context, the beam shaping properties of photonic chips, combined with their intrinsic compact size and low cost, could be beneficial. Here, we demonstrate the implementation of QPI with a photonic integrated circuit (PIC) used as an add-on to a standard wide-field microscope. Combining a 50 mm×50 mm footprint PIC as a secondary coherent illuminating light source with an imaging microscope objective of numerical aperture 0.45 and implementing a phase retrieval approach based on the Kramers–Kronig relations, we achieve a phase noise of 5.5 mrad and a diffraction limited spatial resolution of 400 nm. As a result, we retrieve quantitative phase images of Escherichia coli bacteria cells and monolayers of graphene patches from which we determine a graphene monolayer thickness of 0.45±0.15 nm. The current phase noise level is more than five times lower than that obtained with other state-of-the-art QPI techniques using coherent light sources and comparable to their counterparts based on incoherent light sources. The PIC-based QPI technique opens new avenues for low-phase noise, miniature, robust, and cost-effective quantitative phase microscopy.

A Novel Approach in Cancer Diagnosis: Integrating Holography Microscopic Medical Imaging and Deep Learning Techniques - Challenges and Future Trends.

Medical imaging is pivotal in early disease diagnosis, providing essential insights that enable timely and accurate detection of health anomalies. Traditional imaging techniques, such as Magnetic Resonance Imaging (MRI), Computer Tomography (CT), ultrasound, and Positron Emission Tomography (PET), offer vital insights into three-dimensional structures but frequently fall short of delivering a comprehensive and detailed anatomical analysis, capturing only amplitude details. Three-dimensional holography microscopic medical imaging provides a promising solution by capturing the amplitude (brightness) and phase (structural information) details of biological structures. In this study, we investigate the novel collaborative potential of Deep Learning (DL) and holography microscopic phase imaging for cancer diagnosis. The study comprehensively examines existing literature, analyzes advancements, identifies research gaps, and proposes future research directions in cancer diagnosis through the integrated Quantitative Phase Imaging (QPI) and DL methodology. This novel approach addresses a critical limitation of traditional imaging by capturing detailed structural information, paving the way for more accurate diagnostics. The proposed approach comprises tissue sample collection, holographic image scanning, pre-processing in case of imbalanced datasets, and training on annotated datasets using DL architectures like U-Net and Vision Transformer(ViT's). Furthermore, sophisticated concepts in DL, like the incorporation of Explainable AI techniques (XAI), are suggested for comprehensive disease diagnosis and identification. The study thoroughly investigates the advantages of integrating holography imaging and DL for precise cancer diagnosis. Additionally, meticulous insights are presented by identifying the challenges associated with this integration methodology.

Cells Prioritize the Regulation of Cell Mass Density.

A cell's global physical state is characterized by its volume and dry mass. The ratio of cell mass to volume is the cell mass density (CMD), which is also a measure of macromolecular crowding and concentrations of all proteins. Using the Fluorescence eXclusion method (FXm) and Quantitative Phase Microscopy (QPM), we investigate CMD dynamics after exposure to sudden media osmolarity change. We find that while the cell volume and mass exhibit complex behavior after osmotic shock, CMD follows a straightforward monotonic recovery in 48 hours. The recovery is cell-cycle independent and relies on a coordinated adjustment of protein synthesis and volume growth rates. Surprisingly, we find that the protein synthesis rate decreases when CMD increases. This result is explained by CMD-dependent nucleoplasm-cytoplasm transport, which serves as negative regulatory feedback on CMD. The Na + /H + exchanger NHE plays a role in regulating CMD by affecting both protein synthesis and volume change. Taken together, we reveal that cells possess a robust control system that actively regulates CMD during environmental change.

Three-wavelength and common-path quantitative phase microscopy using a Fresnel bi-prism

This paper aims to present a three-wavelength phase microscopy method for single-shot measurement of the dispersion of a single-mode optical fibre. To achieve this, each wavelength was divided into two beams using Fresnel bi-prism and finally, six beams interfered with each other in a CCD camera and created an interference pattern. The final image contains phase information of the optical fibre related to all three wavelengths modulated at different frequencies. By processing the final image in MATLAB software using Fourier multiplexing and applying optimum spatial filters, the phase difference between the fibre and the surrounding medium has been obtained. Finally, with the acquired phase information and the performed calculations, the index profile of the optical fibre for each wavelength was determined.

Structural Reorganizations and Nanodomain Emergence in Lipid Membranes Driven by Ionic Liquids.

Ionic liquids (ILs) have promising applications in pharmaceuticals and green chemistry, but their use is limited by toxicity concerns, mainly due to their interactions with cell membranes. This study examines the effects of imidazolium-based ILs on the microscopic structure and phase behavior of a model cell membrane composed of zwitterionic dipalmitoylphosphatidylcholine (DPPC) lipids. Small-angle neutron scattering and dynamic light scattering reveal that the shorter-chain IL, 1-hexyl-3-methylimidazolium bromide (HMIM[Br]), induces the aggregation of DPPC unilamellar vesicles. In contrast, this aggregation is absent with the longer alkyl chain IL, 1-decyl-3-methylimidazolium bromide (DMIM[Br]). Instead, DMIM[Br] incorporation leads to the formation of distinct IL-poor and IL-rich nanodomains within the DPPC membrane, as evidenced by X-ray reflectivity, differential scanning calorimetry, and molecular dynamics simulations. The less evident nanodomain formation with HMIM[Br] underscores the role of hydrophobic interactions between lipid alkyl tails and ILs. Our findings demonstrate that longer alkyl chains in ILs significantly enhance their propensity to form membrane nanodomains, which is closely linked to enhanced membrane permeability, as shown by dye leakage measurements. This heightened permeability likely underlies the greater cytotoxicity of longer-chain ILs. This crucial link between nanodomains and toxicity provides valuable insights for designing safer, more environmentally friendly ILs, and promoting their use in biomedical applications and sustainable industrial processes.

Real-Time Analysis of Lipid Droplet Morpho-Chemical Dynamics in Living Human Hepatocytes via Phase-Guided Raman Sampling.

Lipid droplets (LDs) are highly dynamic organelles, undertaking many important functions such as maintaining lipid metabolism and cellular homeostasis. Traditional methods to analyze LD dynamics focus on morphological changes, while chemical dynamics cannot be easily probed with traditional analytical chemistry techniques. To overcome this challenge, we show here how our phase-guided Raman sampling method, where high-resolution phase microscopy images direct a Raman sampling beam, can perform label-free, multimodal characterization of LD dynamics in living cells at both the single-cell and single-LD levels with submicron accuracy and high temporal resolution. We demonstrate the study of the morphological-compositional dynamics of human hepatocellular carcinoma cells (PLC cells) under different environmental conditions and with and without fatty acid supplementation, providing insight into LD heterogeneity and heterogeneity of response. Finally, we introduce a measurement method for the dynamics of cell-average LD composition, which can quickly and accurately characterize the lipid dynamics at the single-cell level with <30 s temporal resolution. The results here show the promise of the phase-guided Raman sampling method for dynamic morpho-chemical profiling of organelle populations.

Microstructure Evolution of Super304H Steel Used in a Service Power Station Boiler.

The microstructure and structure of a Super304H superheater steel pipe after 47,000 h were analyzed by metallographic microscope, scanning electron microscope (SEM), and EDS, and its mechanical properties were measured by hardness meter. The results show that the austenitic grains appear on the outer wall of Super304H steel pipe after service, while the SEM and metallographic microscope tests show that the outer wall particles are coarse. There is an obvious corrosion layer on the outer surface, and the thickness of the corrosion layer on the windward surface is significantly higher than that on the leeward surface. The inner surface is refined and the hardness of the material is significantly increased; the outer surface, the inner surface, and the center all grow abnormally. In this case, the room temperature tensile strength and impact performance of the rough crystal area of the outer wall of the Super304H steel pipe are reduced and fracture along the crystal. Supervision should be strengthened to eliminate the safety risks caused by the abnormal growth of the outer wall austenite grain. The results of crystal phase microscopy show that the main structure of the material still maintains the basic structure of austenitic steel, and particle aggregation mainly occurs in the sub-inner layer of the inner and outer surface. Compared with the lee surface, the middle body structure is basically the same, but whether the thickness of the corrosion layer on the inner surface or the outer surface increases, the deformation degree of the deformation layer is greater. The hardness measurement finds that the hardness of the corrosion layer is caused by the increase in Super304H steel surface stress. In case of pipe explosion accident, the highest chance of pipe explosion here should be closely observed.

Study on the effect and mechanism of coarse magnetite on the flotation of fine-grained hematite

Lean hematite ore is one of the refractory iron ores in China due to its fine crystal size, deep oxidation degree and complex mineral composition. With the deep mining of mine ore, the disseminated particle size of iron minerals is finer, and the ore properties are more complex and difficult to be separated. Therefore, the research on high-efficiency beneficiation technology of fine-grained lean hematite ore is the requirement and important direction of the development of refractory iron ore beneficiation. In this paper, the carrier flotation method is used to comprehensively recover hematite, and the addition of coarse-grained magnetite can effectively improve the recovery rate of fine-grained hematite. The flotation results show that when the ratio of magnetite to hematite is 1: 1, the recovery rate of iron ore can reach more than 96.34%, and the efficient recovery is realized. Based on the results of pure mineral test, the carrier flotation test of Anshan lean hematite ore was carried out. The results show that the reverse flotation concentrate product with TFe grade of 67.88% and total iron recovery of 84.81% can be obtained, and the TFe grade of the reverse flotation tailings is 24.20%. It can be seen that compared with the traditional process, the grade of carrier flotation tailings is 2.37 percentage points lower than that of the original reverse flotation tailings; the carrier reverse flotation process can effectively improve the recovery rate of iron concentrate. In addition, the theoretical analysis of carrier flotation was carried out by contact angle, zeta potential, mineral phase microscope, SEM and XPS. It was found that the collision probability between fine mineral particles and bubbles was low, which limited the recovery of fine mineral particles in the flotation process. Fine-grained hematite can be non-selectively attached to the carrier particles, thereby affecting the adsorption of starch on it, thereby improving the recovery rate of fine particles; The carrier reverse flotation can further improve the flotation efficiency by gravity and shear force. Carrier reverse flotation provides a new idea for effective recovery of iron ore.

An integrated portable system for laser speckle contrast imaging and digital holographic microscopy

A multimodal quantitative phase imaging platform combining digital holographic microscopy (DHM) with laser speckle contrast imaging (LSCI) is demonstrated for imaging weakly scattering and transparent samples in a label-free manner. It uses the principle of coherence of the light source for interferometric detection of phase of transparent and semi-transparent samples. The speckle formation resulting from the coherence property of the laser source is used to track dynamic activities in the regions of interest in the sample. Integration of these two techniques onto a microfluidic chip leads to an optofluidic real-time microscope for live cell imaging applications. In this work, we have developed an integrated multimodal system combining digital holographic microscopy and laser speckle contrast imaging system for Optofluidics and in vitro studies. The sample flowing through the microfluidic channel is imaged to record holograms and video of intensity images at the same time. This enables to map the flow within a microfluidic channel and quantify the channel as well as the particle flow through the channel. The channel morphology along with the particles flowing through the channel are quantified using DHM. The two-dimensional speckle contrast images map the flow of the dynamic microbeads and cells with very high contrast in almost real time. A low-cost portable multimodal quantitative phase microscope combining DHM and LSCI has been demonstrated for real time imaging with applications in optofluidics.

Plastic evolution and phase transition mechanisms in γ-TiAl nano polycrystal by a molecular dynamics simulation

γ-TiAl based alloys are widely regarded as one important high-temperature structural material, however the deformation behaviors are still not clearly clarified. The microscopic plastic deformation and phase transition of γ-TiAl nano polycrystals under compression are investigated by molecular dynamics simulations. The results show that the initial plasticity is dominated by slip of partial dislocations whose continuous formation and secondary slip on the same slip plane result in the generation and disappearance of intrinsic stacking faults (ISFs). At the strain of about 0.2, a continuous structure transformation of “ISF → ESF → TB” is observed, during which the interaction between different ISFs causes the atomic misalignment corresponding to the change in atomic stacking order near ISF. As the compressive strain exceeds 0.2, the FCC-to-BCC phase transition occurs within polycrystals due to the high Mises stress, the high stress level within grains facilitates the expansion of BCC phase from initial FCC phase, and the newly formed BCC phase maintains the atomic-arrangement orderliness of original phase. The interface between FCC and BCC phases obeys the low-energy Kurdjumov-Sachs orientation relationship. This work is helpful for better understanding the atomic-scale deformation behaviors and provides a theoretical guidance for designing high-performance alloy materials.

Coherent linking between confocal amplitude image and confocal phase image in dual-comb microscopy

We propose a method for integrating confocal amplitude and phase images obtained through dual-comb microscopy (DCM). DCM combines the benefits of confocal laser microscopy and quantitative phase microscopy, offering high axial resolution and scan-less imaging. By leveraging the coherence between confocal amplitude and phase images within the same DCM system, we accurately determine the number of phase wrapping iterations, thereby eliminating ambiguity in phase wrapping. We demonstrate this approach using samples with micrometer-range optical thickness and nanometer-scale surface roughness. The results demonstrate an expanded axial range, spanning from micrometers to millimeters, while maintaining nanometer-level axial resolution. This integrated DCM imaging technique enables the simultaneous acquisition of confocal amplitude image and absolute phase image, thus enhancing its potential for wide-axial-dynamic-range imaging across various applications.

Functionalized polyaniline nanofibrils on lamellar structured zirconium for effective bone mineralization

The surface physiology of certain implant material has the ability to promote implant–cell signalling process through which a stable environment is formed. The formation of this favourable environment hastens the process of biomineralization and regeneration. In this context, Zirconium (Zr) when treated with alkali undergoes a surface modification which results in the development of a lamellar structured Zirconium (ATZ). Further, encapsulation of polyaniline (PAni) on ATZ was achieved through the electropolymerization technique which results in an effective and homogeneous electrodeposition of PAni nanofibrils on ATZ surface. A high resolution scanning electron microscope analysis (HR-SEM), phase analysis and functional group analysis were carried out confirming the semi-crystalline PAni nanofibrils braided on the ATZ surface. Potentiodynamic polarization studies of the coated sample exhibited higher Ecorr (−0.060 V) and lower icorr (0.007 µA/cm2) values signifying its better corrosion resistance behaviour in higher potentials coupled with lower electrochemical activity in the SBF medium. The porosity of PAni/ATZ nanofibril was 0.007 % and it provides an effective platform for implant-tissue attachment. The In-vitro biomineralization studies proved the bioactivity of PAni/ATZ which forms well-matured HAp spherules over the surface. Further, hemocompatibility studies of PAni/ATZ expressed a hemolytic rate of ∼0.39 % which denotes it’s biocompatible and non-hemolytic behaviour with the blood cells. Further, the coated sample on gram-positive and gram-negative bacteria causes demise of bacterial cell wall and exhibits higher inhibition percentage. In addition, a standard MTT assay of PAni/ATZ provides an effective support in maintaining cell viability and aids in proliferation of MG-63 cells. Thus, the results demonstrate that the nanoscale surface architecture of PAni/ATZ could serve as a potential and conducive environment for bone-implant interaction on the implant material for better osseointegration.

An Omni-Mesoscope for multiscale high-throughput quantitative phase imaging of cellular dynamics and high-content molecular characterization.

The mesoscope has emerged as a powerful imaging tool in biomedical research, yet its high cost and low resolution have limited its broader application. Here, we introduce the Omni-Mesoscope, a high-spatial-temporal and multimodal mesoscopic imaging platform built from cost-efficient off-the-shelf components. This system uniquely merges the capabilities of label-free quantitative phase microscopy to capture live-cell morphodynamics across thousands of cells with highly multiplexed fluorescence imaging for comprehensive molecular characterization. This Omni-Mesoscope offers a mesoscale field of view of ~5 square millimeters with a high spatial resolution down to 700 nanometers, enabling the capture of detailed subcellular features. We demonstrate its capability in delineating molecular characteristics underlying rare morphodynamic cellular phenomena, including cancer cell responses to chemotherapy and the emergence of polyploidy in drug-resistant cells. We also integrate expansion technique to enhance three-dimensional volumetric super-resolution imaging of thicker tissues, opening the avenues for biological exploration at unprecedented scales and resolutions.

Picometer-Sensitivity Surface Profile Measurement Using Swept-Source Phase Microscopy

In recent years, the Swept-Source Phase Microscope (SS-PM) has gained more attention due to its greater robustness to sample motion and lower signal decay with depth. However, the mechanical wavelength tuning of the swept source creates small variations in the wavenumber sampling of spectra that introduce serious phase noise. We present a software post-processing method to eliminate phase noise in SS-PM. This method does not require high-quality swept light sources or high-precision synchronization devices and achieves ~72 pm displacement sensitivity using a conventional SS-PM system. We compare the performance of this method with traditional software-based methods by measuring phase fluctuations. The phase fluctuations in the traditional software-based method are five times those of the proposed method, which means the proposed method has better sensitivity. Using this method, we reconstructed phase images of air wedges and resolution plates to demonstrate the SS-PM’s potential for high-sensitivity surface profiling measurement. Finally, we discuss the advantages of SS-PM over traditional Spectral-Domain PM techniques.

An auto-focusing method for the lens-free single-shot digital holography based on the dissimilar state

Lens-free digital holography enables multi-focus quantitative phase microscopy for imaging both reflective surfaces and transparent objects. For high-resolution reconstruction in lens-free holographic microscopy, precisely and quickly determining the defocusing distance is essential. In this work, we propose a new single-shot method that relies on the disparity between the captured image and the reconstructions on ergodic planes corresponding to different defocusing distances. This approach effectively generates a unimodal curve, providing a robust solution for auto-focusing and avoiding the need to select different values for discriminative factors across distinct sample types. Furthermore, the simulations and experiments demonstrate that the entire focal-plane search process is simpler and quicker, potentially at least doubling the speed compared to traditional methods. The experiments, conducted in a traditional lens-free system, utilize amplitude and phase resolution targets to validate this method’s applicability. We believe that this method will be an alternative refocusing method for lens-free on-chip microscopes.

Single-shot quantitative phase microscopy: a multi-functional tool for cell analysis.

This study showcases the multifunctionality of a single-shot quantitative phase microscopy (QPM) system for comprehensive cell analysis. The system captures four high-contrast images in one shot, enabling tasks like cell segmentation, measuring cell confluence, and estimating cell mass. We demonstrate the usability of the QPM system in routine biological workflows, showing how its integration with computational algorithms enables automated, precise analysis, achieving accuracy scores between 85% and 97% across samples with varying cell densities, even those with low signal-to-noise ratios. This cost-effective tool operates under low-intensity light and resists vibrations, making it highly versatile for researchers in both optical and biological fields.

Cellular Automata Coupled with Two‐Phase Lattice Boltzmann Model for Modeling of Kinetics of Formation and Structure of Silica‐Based Sol–Gel Materials

A numerical model describing the sol–gel process on a mesoscopic scale is presented. The model is implemented as a cellular automaton‐based system, specifically reaction‐limited aggregation merged with two‐phase lattice Boltzmann method, which allows to describe the sol–gel process together with microscopic phase separation occurring during this process. The influence of model parameters on the structural properties of the resulting gel porosity, mesoporosity, and specific surface area, as well as on the kinetics of the gelation process: the shape of the kinetics curve and the structure formation time, is examined. It is proposed to combine the model parameters with the composition of the reaction mixture (the content of individual reagents and catalysts) and the process conditions.

Experimental study on high temperature gaseous hydrogen fluoride corrosion of boiler water-cooled wall pipes

ABSTRACT Hydrogen fluoride (HF) corrosion of boiler water-cooled wall pipes at high temperature hinders the co-disposal of fluorinated hazardous wastes and coal by combustion. In this paper, common water-cooled wall pipes (15CrMoG and 20G) were utilized to perform gaseous HF corrosion experiments at high temperature on a horizontal tube furnace. The effects of temperature on HF corrosion of different water-cooled wall pipes in 0.2% HF were investigated. Corrosion kinetics curve was obtained by calculating the mass increase due to corrosion. The microscopic morphology and physical phase composition of water-cooled wall pipes after HF corrosion were analyzed. The corrosion resistances of the two water-cooled wall pipes decrease with increasing the temperature. The corrosion weight gain curves of 15CrMoG and 20G at 550 ℃ are ΔW 1.9144 = 0.2100t and ΔW 1.8356 = 0.1344t, respectively. The average corrosion rates of 15CrMoG and 20G are 0.0177 and 0.0125 mg/(cm2·h), respectively. The corrosion resistance of 15CrMoG is superior compared to 20G. The HF corrosion at high temperature consists of non-alternating fluorination and oxidation of the metal matrix. This study is of great significance for the protection of boilers with HF corrosion at high temperature.

Andrology laboratory review: evaluation of sperm morphology

Sperm morphology assessment has an important role in male fertility diagnosis and prognosis, both for humans and animals. Thus, it is important that relevant results are comparable and consistent. To achieve these aims, the following procedures are recommended: a. semen sample is suitably ‘fixed’ (e.g. in isotonic buffered formal-saline); b. sperm are examined at 1,000 x (phase or DIC microscopy); c.at least 200 sperm are counted; d. each sperm is placed into 1 category, only (e.g. normal, head, midpiece etc), and e. 70% ‘normal’ sperm is the threshold for a satisfactory sample. In addition, morphologists should be provided with relevant continuing education, upskilling, and monitoring programs. This review provides guidelines for the best performance of this assessment, as well as for avoiding pitfalls.