Micellar Surface Research Articles

Resveratrol Radical Repair by Vitamin C at the Micelle-Water Interface: Unexpected Reaction Rates Explained by Ion-Dipole Interactions.

Repair reactions of lipophilic phenoxy radicals by hydrophilic co-antioxidants at model membranes are important for understanding the factors that govern the interactions between radical scavengers in biological systems. By using near-UV photoionization, we have selectively generated the phenoxy radical of the famous antioxidant resveratrol inside anionic (SDS), cationic (DTAC), or neutral (TX-100) micelles, as well as in homogeneous aqueous solution, and have compared its repairs in these media by the water-soluble co-antioxidants ascorbic acid and ascorbate monoanion. With all surfactants, these reactions are dynamic processes at the micelle-water interface. Whereas for the combinations ascorbate monoanion/ ionic micelle the repair rates can be rationalized by the Coulombic interactions, unexpected effects were observed with the neutral ascorbic acid and the charged micelles: for the anionic micelles, this repair is three times faster than in homogeneous solution, and two orders of magnitude faster than for the cationic micelles. Given that the repair by a concerted proton-electron transfer demands a coplanar arrangement of the resveratrol phenoxy centre sticking out into the Stern layer and the co-antioxidant hydroxy moiety approaching from the aqueous bulk, we explain these results by ion-dipole interactions: only at a negatively charged micellar surface does the direction of the large dipole moment of ascorbic acid lead to an orientation favourable for the repair.

Effect of heat-induced κ-casein dissociation on acid coagulation of milk.

In this study, the relationship between the dissociation of κ-casein from casein micelles due to heat-induced denaturation and the strength of acid milk gel was investigated. The κ-casein-dissociated micelles were fractionated by gel filtration chromatography and two-dimensional polyacrylamide gel electrophoresis, and their zeta potential and surface hydrophobicity were measured. The negative charge of the κ-casein-dissociated micelles was lower than that of native micelles, and micellar surface hydrophobicity was higher. For confirmation, the isoelectric point of the casein micelles was measured. The κ-casein-dissociated micelles were found to cohere at an earlier stage of acidification than the native micelles. These results demonstrated that the heat-induced increase in the strength of acid milk gel was partly due to the decrease in micellar surface charge and partly to the increase in surface hydrophobicity caused by the dissociation of κ-casein.

Aggregation behavior of morpholinium surfactants in the presence of organic electrolytes

It was shown that the addition of organic electrolytes to aqueous solutions of morpholinium surfactants facilitates micellization, reduces the micellar surface potential, increases the hydrodynamic diameter of micelles and favors the formation of cylindrical micelles which behave as pseudoplastic fluids. At low shear rates, the viscosity is extremely large and changes insignificantly, and it decreases sharply with increase in shear rate. Significant decrease in viscosity upon the increase in shear deformations indicates the orientation of cylindrical micelles along the direction of the flow with the increase in shear rate.

A sumatriptan coarse-grained model to explore different environments: interplay with experimental techniques

In this work, we developed a coarse-grained model of sumatriptan suitable for extensive molecular dynamics simulations. First, we confirmed the interfacial distribution of this drug in bilayers through cryogenic transmission electron microscopy and small-angle X-ray scattering techniques, as was predicted by our previous atomistic simulations. Based on these simulations, we developed a coarse-grained model for sumatriptan able to reproduce its overall molecular behavior, captured by atomistic simulations and experiments. We then tested the sumatriptan model in a micellar environment along with experimental characterization of sumatriptan-loaded micelles. The simulation results showed good agreement with photon correlation spectroscopy and electrophoretic mobility experiments performed in this work. The particle size of the obtained micelles was comparable with the simulated ones; meanwhile, zeta-potential results suggest adsorption of the drug on the micellar surface. This model is a step forward in the search for a suitable drug-delivery system for sumatriptan.

A MICELLAR DECONTAMINATION STRATEGY FOR REMOVING POLYCYCLIC AROMATIC HYDROCARBONS FROM THE ENVIRONMENT

Environmental decontamination requires strategies for removing organic contaminants from the ecosystem. Polycyclic aromatic hydrocarbons (PAHs) with toxic and carcinogenic properties are potentially hazardous pollutants. One suitable method for PAHs removal is their solubilization by micelles. This paper evaluates the effect of borax upon the aggregation ability of sodium dodecyl sulfate (SDS) with consequence over the micellar solubilization of naphthalene. Various techniques, such as micellar electrophoretic chromatography (MEKC), surface tension, UV-Vis and steady-state fluorescence were used to assess the micelle formation. The results show that borax decreases the critical micelle concentration of SDS and enhances the naphthalene solubilization. The work recommends borax as an efficient booster in the micellar decontamination strategy of PAHs.

PH-Induced evolution of surface patterns in micelles assembled from dirhamnolipids: dissipative particle dynamics simulation.

Dissipative particle dynamics (DPD) simulation is used to study the effect of pH on the morphological transition in micelles assembled from dirhamnolipids (diRLs), and analyze the pH-driven mechanism and influence factors of micellar surface patterns. At pH < 4.0, various multilayer structures with homogeneous surface patterns are observed, whereas diRLs can self-assemble into novel anisotropic morphologies with phase-separated surface patterns at pH > 7.4, such as patchy spherical micelles, rod-like micelles with helical surface patterns and a lamellar phase with anisotropic surface patterns. The change in a surface pattern results from the diverse molecular arrangement in the course of assembly due to the deprotonation of carboxyl groups. Further studies show that influence factors, such as molecular structure, solvent selectivity and intramolecular interaction, are closely associated with the changes in surface patterns and topological structures. In detail, decreasing the critical packing parameter of rhamnolipids, increasing the solution polarity and weakening the compatibility between rhamnose rings and alkyl chains are all beneficial to the formation of phase-separated surface patterns. Remarkably, a wider variety of surface patterns (randomly anisotropic surface patterns) can be further obtained with the different factors mentioned above. This work is expected to extend the applications of diRLs to advanced functional materials like drug delivery, optoelectronics and nanofiltration membranes.

Shift in pKa of 1,10-Phenanthroline in TBAB and PEG-400 Micellar Media: A Potentiometric Study

The acid-base equilibrium of 1,10-phenanthroline (1,10-phen) in the presence of polyethylene glycol 400 (PEG-400, non-ionic) and tetrabutylammonium bromide (TBAB, ionic) micellar media has been studied by Calvin-Wilson titration technique at different mole fractions (0.5% - 2.5%) of PEG-400 and TBAB micellar solutions at an ionic strength of 0.16 mol dm-3 NaCl and at a temperature of 298 K. The pH metric data were subjected to SCPHD program to obtain correction factor and Kw which were given as initial inputs for MINIQUAD75 program to refine protonation constants. HySS program was then used to generate the species distribution diagrams versus pH using the results obtained from the MINIQUAD75 program and SIM run data. The difference in values of protonation constants in aqueous medium (logβ1 = 4.93 & logβ2 = 6.22) and in the micellar media (PEG-400, logβ1 = 4.89 & logβ2 = 5.91 and TBAB, logβ1 = 4.84 & logβ2 = 5.73) is attributed to different intrinsic solvent characteristics of micelles. In case of ionic surfactants, the electrostatic micellar surface is an additional contributing factor.

Distribution of zwitter-ionic tryptophan between the micelles of 1-dodecyl-3-methyl imidazolium and aqueous medium from molecular dynamic simulation.

Ionic liquids that form micelles have great potential as drug carriers and separating agents for bioactive substances. For such applications, a key issue is the distribution of the target substance between the micelle and its environment. We perform MD simulations to study solubilization of zwitter-ionic tryptophan in micelles of 1-dodecyl-3-methylimidazolium bromide. We found that the distribution of tryptophan depends strongly on the degree of counterion binding. A decrease in binding of bromide counterions leads to a substantial increase of the distribution coefficient. A dense layer of counterions at the micellar surface impedes the solubilization of the zwitter-ionic tryptophan but at the same time the presence of such a dense layer obstructs the washout of the solubilized tryptophan molecules from the micelle. Based on our simulation data, we conclude that an increase of the distribution coefficient of tryptophan between the micelle and water may be achieved by several means: by introducing counterions that bind weakly to the micelle (bulky ions whose charge is not strongly localized) and/or by employing micelle-forming ionic liquids with shorter alkyl chains to diminish the degree of counterion binding.

Self-Transfecting Micellar RNA: Modulating Nanoparticle Cell Interactions via High Density Display of Small Molecule Ligands on Micelle Coronas.

The intracellular delivery of synthetic nucleic acids represents a major challenge in biotechnology and in biomedicine. Methods to deliver short, double-stranded RNA to living cells are of particular interest because of the potential to engage the RNA interference machinery and to regulate mRNA expression. In this work, we describe novel RNA-polymer amphiphiles that assemble into spherical micellar nanoparticles with diameters of ca. 15-30 nm and efficiently enter live cells without transfection reagents. Each micelle consists of approximately 100 RNA strands forming a densely packed corona around a polymeric core. Importantly, the surface-displayed RNA remains accessible for hybridization with complementary RNA. Chemical modification of the termini of hybridized RNA strands enabled the display of small organic moieties on the outer surface of the micelle corona. We found that some of these modifications can have a tremendous impact on cellular internalization efficiencies. The display of hydrophobic dabcyl or stilbene units dramatically increased cell uptake, whereas hydrophilic neutral hydroxy or anionic phosphate residues were ineffective. Interestingly, neither of these modifications mediated noticeable uptake of free RNA oligonucleotides. We infer that their high density display on micellar nanoparticle surfaces is key for the observed effect; achieved with local effective surface concentrations in the millimolar range. We speculate that weak interactions with cell surface receptors that are amplified by the multivalent presentation of such modifications may be responsible. The installation of small molecule ligands on nanomaterial surfaces via hybridization of chemically modified oligonucleotides offers a simple and straightforward way to modulate cellular uptake of nanoparticles. Biological functionality of micellar RNA was demonstrated through the sequence-specific regulation of mRNA expression in HeLa cells.

Molecular Dynamics Simulation of the pH-Induced Structural Transitions in CTAB/NaSal Solution.

We performed molecular dynamics simulations to study the pH-induced structural transitions for aqueous mixtures of a cationic surfactant (cetyltrimethylammonium bromide, CTAB) and a hydrotrope (sodium salicylate, NaSal). We obtained rigid cylindrical, spherical, and flexible cylindrical micelles at pH 7, 2, and 0, respectively, which agrees well with the experimental results of Umeasiegbu et al. (Langmuir 2016, 32, 655). By analyzing the different micellar structural properties, including distribution and molecular orientation of CTA+ and Sal- inside the micelle, we found that the binding form of the protonated salicylate molecules with CTA+ is different from that of Sal- ions. Because of the protonation of salicylate molecules with reduction in pH, their hydrogen bonding interactions with water molecules strengthened and the electrostatic interactions with CTA+ headgroups weakened. Thus, the repulsion of the CTA+ headgroups led to the breakage of the cylindrical micelle into spherical ones. At pH 0, the H-bond-strengthened cation-π interactions between salicylate and CTA+ were verified. We concluded that the penetration of salicylate molecules inside the micelle and the strong association of Cl- ions on the micellar surface play a key role in the formation of a flexible cylindrical micelle. This work provides an atomic-level insight into the mechanism of pH-induced shape transitions in the CTAB/NaSal systems, which is expected to be helpful to understand the aggregate behavior of cationic surfactant-hydrotrope solution.

Synergistic Enhancement of Electron-Accepting and -Donating Ability of Nonconjugated Polymer Nanodot in Micellar Environment.

Understanding the fundamental electron-transfer dynamics in photoactive carbon nanoparticles (CNPs) is vitally important for their fruitful application in photovoltaics and photocatalysis. Herein, photoinduced electron transfer (PET) to and from the nonconjugated polymer nanodot (PND), a new class of luminescent CNP, has been investigated in the presence of N,N-dimethylaniline (DMA) and methyl viologen (MV2+) in homogeneous methanol and sodium dodecyl sulfate (SDS) micelles. It has been observed that both DMA and MV2+ interact with the photoexcited PND and quench the PL intensity as well as excited-state lifetime in bulk methanol. While in bulk methanol, purely diffusion-controlled PET from DMA to MV2+ via PND has been observed, the mechanism and dynamics differ significantly in SDS micelles. In contrast to homogeneous methanol medium, a distinct synergic effect has been observed in SDS micelles. The presence of both DMA and MV2+ enhances the electron-accepting and -donating abilities of PND in SDS micelles. Time-resolved photoluminescence (PL) measurements reveal that the PET process in SDS micelles is nondiffusive in nature mainly due to instantaneous electron transfer at the confined micellar surface. These results have been explained on the basis of heterogeneous microenvironments of SDS micelles which compartmentalize the donor and acceptor inside its micellar pseudo phase. The present findings provide valuable insights into the intrinsic relation between redox and PL properties of nonconjugated PND.

EFFECT OF CATIONIC MICELLES OF CETYLTRIMETHYLAMMONIUM BROMIDE ON PROTONATION EQUILIBRIA OF SALICYLIC ACID DERIVATIVES

To gain more information about the effect of surfactant on salicylic acid derivatives, the stoichiometric protonation constants of 5-Sulphosalicylic acid and 5-Hydroxysalicylic acid in 0.0%-2.5% (w/v) cetyltrimethylammonium bromide (CTAB) - water mixtures were determined at an ionic strength of 0.16 mol dm-3 and at 303 K. A potentiometric method was used and the calculation of constants was carried out using the computer program MINIQUAD75. These protonation constants values have been found to shift in micellar media as compared to those in pure water. The differences in the values have been attributed to the solvent properties of the interfacial and bulk phases involving contribution from the micellar surface potential in the case of charged micelles. The trend of log values of step-wise protonation constants with mole fraction of the medium have been explained based on specific solute-solvent interactions. In this study Distributions of species, percentage of species composition, protonation equilibria and effect of influential parameters on the protonation were also discussed.

Mechanistic details on Pd(II)/5,10,15,20-tetrakis(1-methyl-4-pyridyl)porphyrin complex formation and reactivity in the presence of DNA

Kinetics of coordination of Pd(II) by the macrocyclic porphyrin 5,10,15,20-tetrakis(1-methyl-4-pyridyl)porphyrin (H2P4+) is investigated and confirms quantitative formation of a planar PdP4+ complex at room temperature (formation rate 0.19 M−1 s−1 at 25 °C, 0.2 M NaCl, pH 3). Then, the binding ability to DNA of the pre-formed PdP4+ complex is analysed. To achieve this aim, spectrophotometry, spectrofluorometry and viscometry are used. Thermodynamic parameters for binding, obtained by the temperature dependence of the equilibrium constants, are ∆H = –71 kJ mol−1 and ∆S = −134 J mol−1 K−1. These values, being both highly negative, agree with full PdP4+ intercalation into DNA. Moreover, kinetics of the binding reaction is analysed by the T-jump technique (reaction times in the 1–5 ms range). Experiments on the porphyrin ligand retention on negative SDS and positive DTAC micellar surfaces are also done. Taken altogether, these data provide mechanistic details on complex formation and on DNA binding and relevant energies and driving forces. It is found that interaction between PdP4+ and base pairs is very strong (K abs DNA = 8.0 × 105 M−1 at 25 °C, 1.0 M NaCl), not only owing to the high positive charge borne by the complex, but also to the contribution of high hydrophobicity of the porphyrin ring. In the dye/DNA complex, PdP4+ is buried into the helix, as confirmed also by fluorescence quenching tests. Both presence and type of metal ion play a major role, as lower affinity and lower induced helix conformation changes are found in the case of the H2P4+/DNA and CuP4+/DNA systems.

Mallard Blue binding to heparin, its SDS micelle-driven de-complexation, and interaction with human serum albumin: A combined experimental/modeling investigation

Heparin is a sulfated glycan widely used as anticoagulant in medicine. Mallard Blue (MalB), a small cationic dye developed in our laboratories, is able to detect heparin in serum and plasma in a dose-response manner, with performance superior to its direct competitors. However, many aspects of MalB/heparin binding still remain to be explored which, once solved, may foster the clinical use of MalB. Among these, the characterization of the energetics that drives the MalB/heparin binding process, the competition for MalB binding by other polyanions (e.g., negatively-charged surfactant micelles), and the interaction of MalB with serum proteins are of particular interest. This work fills this gap by means of a combination of experimental investigations (UV-visible spectroscopy and isothermal titration calorimetry), and computational approaches based on molecular dynamics (MD) simulation techniques. In combination, the results obtained show that MalB efficiently binds to both heparin and SDS, with the binding being enthalpic in nature; yet, SDS is able to extract MalB from its complex with heparin when the surfactant is in its self-assembled form, the driving force underlying SDS-induced MalB/heparin de-complexation being entropic in nature as the two enthalpies of binding effectively cancel each other out. Once bound to SDS, the dye remains electrostatically bound to the micellar surface and does not penetrate the micelle palisade layer, as verified by steered molecular dynamics/umbrella sampling simulations. Finally, the affinity of MalB for human serum albumin (HSA), the most abundant plasma protein, is found to be lower than that for heparin, confirming the ability of the dye to work in complex physiological environments.

Cleavable Multifunctional Targeting Mixed Micelles with Sequential pH-Triggered TAT Peptide Activation for Improved Antihepatocellular Carcinoma Efficacy.

Although tumor-targeting nanovehicles for hepatocellular carcinoma (HCC) chemotherapy have attracted great research and clinic interest, the poor cancer penetration, inefficient cellular uptake, and slow intracellular drug release greatly compromise their therapeutic outcomes. In this work, a multifunctional mixed micellar system, consisting of glycyrrhetinic acid (GA) for specific liver-targeting, trans-activator of transcription (TAT) peptide for potent cell penetration, and pH-sensitive poly(β-amino ester) polymers for acidic-triggered drug release, was developed to provide HCC-targeting delivery and pH-triggered release of doxorubicin (DOX). These micelles were hypothesized to efficaciously accumulate in HCC site by the guide of GA ligands, enter into cancer cells facilitated by the activated TAT peptide on the micellar surface, and finally rapidly release DOX in cytoplasm. To demonstrate this design, DOX was initially loaded in micelles modified with both GA and TAT (DOX/GA@TAT-M) with high drug loading efficiency and pH-sensitive drug release profiles. The HCC-targeting cellular uptake and synergetic anticancer efficacy were tested, indicating DOX/GA@TAT-M could be specifically and effectively internalized into HCC cells by the effect of GA targeting and TAT penetrating with enhanced cytotoxicity. In addition, the prolonged circulation time and enhanced accumulation in tumor facilitated its potent tumor growth inhibition activity in vivo. These results demonstrated that the cleavable multifunctional mixed micelles with tumor targeting, controlled TAT peptide activation, and sequential pH-sensitive drug release could be an efficient strategy for HCC treatment.

Activation of peroxymonosulfate by surfactants as the metal-free catalysts for organic contaminant removal.

The present work described that tertiary ammonium surfactants containing bromide ion as novel metal-free catalysts were innovatively coupled with peroxymonosulfate (PMS) to build a simple catalytic oxidation system, possessing outstanding catalytic ability with organic dye Reactive Red M-3BE (RR M-3BE) as the target pollutant. Furthermore, cetyltrimethylammonium bromide (CTAB), a representative of cationic surfactant, was selected to further investigate the catalytic oxidation performance. It is found that at the critical micelle concentration (CMC) of CTAB, the oxidation efficiency of the CTAB/PMS system was optimal due to the strong electrostatic attraction between the CTA+ micelle and reactive anions (Br- and HSO5-), concentrating HSO5- and Br- at the micellar surface, which accelerated the catalytic oxidation reaction between Br- and HSO5-, generating a mass of highly active reactive species. A hybrid method that combined radical scavenger (methanol) with electron paramagnetic resonance (EPR) technology was adopted for the investigation of reactive species, and the results indicated that hydroxyl radical (•OH) was generated and had a major role in the process. The findings from this work provide a practicable pathway for highly efficient PMS activation in wastewater treatment, and also initiate a promising research area of surfactants in the field of environmental catalysis.

Traceable PEO-poly(ester) micelles for breast cancer targeting: Theeffect of core structure and targeting peptide on micellar tumoraccumulation.

Traceable poly(ethylene oxide)-poly(ester) micelles were developed through chemical conjugation of a near-infrared (NIR) dye to the poly(ester) end by click chemistry. This strategy was tried for micelles with poly(ε-caprolactone) (PCL) or poly(α-benzyl carboxylate-ε-caprolactone) (PBCL) cores. The surface of both micelles was also modified with the breast cancer targeting peptide, P18-4. The results showed the positive contribution of PBCL over PCL core on micellar thermodynamic and kinetic stability as well as accumulation in primary orthotopic MDA-MB-231 tumors within 4-96h following intravenous administration in mice. This was in contrast to invitro studies where better uptake of PEO-PCL versus PEO-PBCL micelles by MDA-MB-231cells was observed. The presence of P18-4 enhanced the invitro cell uptake and homing of both polymeric micelles in breast tumors, but only at early time points. In conclusion, the use of developed NIR labeling technique provided means for following the fate of PEO-poly(ester) based nano-carriers in live animals. Our results showed micellar stabilization through the use of PBCL over PCL cores, to have a more significant effect in enhancing the level and duration of nano-carrier accumulation in primary breast tumors than the modification of polymeric micellar surface with breast tumor targeting peptide, P18-4.

Effects of Hydrotropic Salt on the Nanoscopic Dynamics of DTAB Micelles.

Effects of a hydrotropic salt, sodium salicylate (NaSal), on the dynamic behavior of cationic dodecyltrimethylammonium bromide (DTAB) micelles as studied using dynamic light scattering (DLS) and quasielastic neutron scattering (QENS) techniques are reported here. DLS study showed that the addition of NaSal leads to a decrease in the apparent diffusion coefficient of the whole micelle indicating micellar growth. QENS data analysis suggested that observed dynamics involves two distinct motions, lateral motion of the surfactant over the curved micellar surface and localized segmental motion of the surfactant. It is found that the addition of NaSal slows down the lateral motion of DTAB while the localized segmental motion of the DTAB chain is not affected much. An atomistic molecular dynamics (MD) simulation was performed to gain further insight into the underlying phenomena. MD simulation results are found to be consistent with the experimental observations. MD simulation revealed that location of the salicylate ions on the micellar surface and their strong electrostatic association with their oppositely charged surfactant headgroup are the major factors in slowing down the lateral motion of the DTAB molecule. In the present work, a quantitative description of the effects of NaSal on the nanoscopic dynamics of DTAB micelles and its correlation with the microstructure of the micelle is provided.

Studies on Gemini–Conventional Surfactant Mixtures

This article provides a detailed description of micelles formed upon mixing of cationic gemini alkanediyl-α,ω-bis(dimethylcetylammonium bromides) (henceforth referred as 16-s-16 where the spacer s = 4, 5, 6) with a cationic conventional surfactant cetyltriphenylphosphonium bromide (CTPB). For comparison, the conventional surfactant cetyltrimethylammonium bromide (CTAB) was also mixed with CTPB. The critical micelle concentration (cmc) values were obtained by tensiometric measurements. The results analyzed as per the Clint, Rubingh and Rosen models suggest strong synergism in the mixed systems. Ideal cmc values (cmc*) are always greater than the experimental values. The micellar mole fraction (X 1 m ), interaction parameter (β m), obtained from Rubingh’s model, and interfacial mole fraction (X 1 ), interaction parameter (β σ ), obtained from Rosen’s model, show that the contribution of CTPB is less but the interaction is strong in mixed micelles as compared to a mixed monolayer. The CTPB molecule contains three phenyl rings and its adjustment at the planar surface (at the air/water interface) is easier than in the micellar surface. The surface excess (Γ max) and minimum area per head group (A min) values also support this conclusion, as these values are closer to that of pure CTPB. Thermodynamic parameters were also calculated. All these results suggest that mixed micelles are formed with strong synergism between the two components. The 1H NMR studies show that the gemini with spacer s = 4 is more de-shielded than the other geminis, suggesting that these micelles are crowded with more N-methyl protons.

Biophysical characterization of quaternary pyridinium functionalized polynorbornenes for DNA complexation and their cellular interactions.

Cationic polymers with hydrophobic side chains have gained great interest as DNA carriers since they form a compact complex with negatively charged DNA phosphate groups and interact with the cell membrane. Amphiphilic polyoxanorbornenes with different quaternary alkyl pyridinium side chains with ethyl-p(OPy2) and hexyl units-p(OPy6) bearing 10 kDa MWT were synthesized by living Ring-Opening Metathesis Polymerization method. The physicochemical characteristics: critical micellar concentration, size distribution, surface charge, and condensation of polymer/DNA complex were investigated. Morphology of complexes was monitored by Atomic force microscopy. Cytotoxicity and interaction of these complexes with model lipid vesicles mimicking the cell membrane were examined. These polymers were enabled to form small sized complexes of DNA, which interact with model membrane vesicles. It was found that the nature of hydrophobicity of the homopolymers significantly impacts rates of DNA complexation and the surface charge of the resulting complexes. These results highlight the prospect of the further examinations of these polymers as gene carriers.