Met Office Unified Model Research Articles

A climatology of tropical wind shear produced by clustering wind profiles from the Met Office Unified Model (GA7.0)

Abstract. Toward the goal of linking wind shear with the mesoscale organization of deep convection, a procedure for producing a climatology of tropical wind shear from the output of the Met Office Unified Model climate model is presented. Statistical information from wind profiles from tropical grid columns is used to produce a tractable number (10) of profiles that efficiently span the space of all wind profiles. Physical arguments are used to filter wind profiles that are likely to be associated with organized convection: only grid columns with substantial convective available potential energy (CAPE) and those with shear in the upper quartile are considered. The profiles are rotated so that their wind vectors at 850 hPa are aligned, in order to be able to group like profiles together, and their magnitudes at each level are normalized. To emphasize the effect of lower levels, where the organization effects of shear are thought to be strongest, the profiles above 500 hPa are multiplied by 14. Principal component analysis is used to truncate the number of dimensions of the profiles to seven (which explains 90 % of the variance), and the truncated profiles are clustered using a K-means clustering algorithm. The median of each cluster defines a representative wind profile (RWP). Each cluster contains information from thousands of wind profiles with different locations, times and 850 hPa wind directions. To summarize the clusters statistically, we interpret the RWPs as pseudo-wind profiles and display the geographic frequency, seasonal frequency and histograms of wind direction at 850 hPa for each cluster. Geographic patterns are evident, and certain features of the spatio-temporal distributions are matched to observed distributions of convective organization. The form of the RWPs is also matched to specific wind profiles from case studies of organized convection. By performing the analysis on climate-model output, we lay the foundations for the development of the representation of shear-induced organization in a convection parametrization scheme (CPS). This would use the same methodology to diagnose where the organization of convection occurs and modify the CPS in an appropriate manner to represent it. The procedure could also be used as a diagnostic tool for evaluating and comparing climate models.

Winds and tides of the Extended Unified Model in the mesosphere and lower thermosphere validated with meteor radar observations

Abstract. The mesosphere and lower thermosphere (MLT) is a critical region that must be accurately reproduced in general circulation models (GCMs) that aim to include the coupling between the lower and middle atmosphere and the thermosphere. An accurate representation of the MLT is thus important for improved climate modelling and the development of a whole atmosphere model. This is because the atmospheric waves at these heights are particularly large, and so the energy and momentum they carry is an important driver of climatological phenomena through the whole atmosphere, affecting terrestrial and space weather. The Extended Unified Model (ExUM) is the recently developed version of the Met Office's Unified Model which has been extended to model the MLT. The capability of the ExUM to model atmospheric winds and tides in the MLT is currently unknown. Here, we present the first study of winds and tides from the ExUM. We make a comparison against meteor radar observations of winds and tides from 2006 between 80 and 100 km over two radar stations – Rothera (68∘ S, 68∘ W) and Ascension Island (8∘ S, 14∘ W). These locations are chosen to study tides in two very different tidal regimes – the equatorial regime, where the diurnal (24 h) tide dominates, and the polar regime, where the semi-diurnal (12 h) tide dominates. The results of this study illustrate that the ExUM is capable of reproducing atmospheric winds and tides that capture many of the key characteristics seen in meteor radar observations, such as zonal and meridional wind maxima and minima, the increase in tidal amplitude with increasing height, and the decrease in tidal phase with increasing height. In particular, in the equatorial regime some essential characteristics of the background winds, tidal amplitudes and tidal phases are well captured but with significant differences in detail. In the polar regime, the difference is more pronounced. The ExUM zonal background winds in austral winter are primarily westward rather than eastward, and in austral summer they are larger than observed above 90 km. The ExUM tidal amplitudes here are in general consistent with observed values, but they are also larger than observed values above 90 km in austral summer. The tidal phases are generally well replicated in this regime. We propose that the bias in background winds in the polar regime is a consequence of the lack of in situ gravity wave generation to generate eastward fluxes in the MLT. The results of this study indicate that the ExUM has a good natural capability for modelling atmospheric winds and tides in the MLT but that there is room for improvement in the model physics in this region. This highlights the need for modifications to the physical parameterization schemes used in the model in this region – such as the non-orographic spectral gravity wave scheme – to improve aspects such as polar circulation. To this end, we make specific recommendations of changes that can be implemented to improve the accuracy of the ExUM in the MLT.

Radar reflectivity assimilation using hourly cycling4D‐Varin the Met Office Unified Model

AbstractA new method has been developed to directly assimilate volume scans of radar reflectivity data with 4D‐Var in the Met Office Unified Model. The method has been demonstrated in the convective‐scale hourly‐cycling UKV forecast model. Reflectivity observations from 18 C‐band radars in the British Isles are assimilated. This article describes the method of observation processing and quality control, the observation operator, and assimilation method. The assimilation method uses a minimum threshold rainwater content in the forward operator to give sensitivity to reflectivity observations where there is no rain in the background. Furthermore, the use of the Huber norm in the observation penalty function allows the use of observations with large innovations in the assimilation. A change was made to the precipitation efficiency in the microphysics scheme of the linear perturbation forecast model to ensure stability of the scheme. A case‐study is presented which demonstrates how the inclusion of reflectivity observations enhances convergence through analysis increments to the wind field, leading to improvements to the location of convective precipitation features in the forecast. Two‐month trials for summer and winter seasons demonstrate significant improvements to rain forecasts in the nowcasting range.

Understanding the development of systematic errors in the Asian summer monsoon

Abstract. Despite the importance of monsoon rainfall to over half of the world's population, many climate models of the current generation struggle to capture some of the major features of the various monsoon systems. Studies of the development of errors in several tropical regions have shown that they start to develop very quickly, within the first few days of a model simulation, and can then persist to climate timescales. Understanding the sources of such errors requires the combination of various modelling techniques and sensitivity experiments of varying complexity. Here, we demonstrate how such analysis can shed light on the way in which monsoon errors develop, their local and remote drivers and feedbacks. We make use of the seamless modelling approach adopted by the Met Office, whereby different applications of the Met Office Unified Model (MetUM) use essentially the same model configuration (dynamical core and physical parameterisations) across a range of spatial and temporal scales. Using the Asian summer monsoon (ASM) as an example, we show that error patterns in circulation and rainfall over the ASM region in the MetUM are similar between multidecadal climate simulations and seasonal hindcasts initialised in spring. Analysis of the development of these errors on both short-range and seasonal timescales following model initialisation suggests that both the Maritime Continent and the oceans around the Philippines play a role in the development of East Asian summer monsoon errors, with the Indian summer monsoon region providing an additional contribution, while the errors over the Indian summer monsoon region itself appear to arise locally. Regional modelling with various lateral boundary locations helps to separate local and remote contributions to the errors, while regional relaxation experiments shed light on the influence of errors developing within particular areas on the region as a whole.

Biases in Indian Summer Monsoon Precipitation Forecasts in the Unified Model and Their Relationship With BSISO Index

AbstractThis study shows that the Boreal Summer Intraseasonal Oscillation (BSISO) dominates the Indian summer monsoon low‐precipitation bias in the Met Office Unified model. Analyzing a recent 9‐year period (June, July, August only), it is found that the precipitation bias is dominated by break and break‐to‐active transition BSISO phases, while some of the other phases have no bias at all over a 7‐day forecast. Evidence of a link to upstream effects is found, in that there is a delayed reduction in the moisture flux entering India from the west. It is also shown that an increase in the net flow of moisture out of India to the east is strongly linked to the low‐precipitation bias, and there is some evidence that this is related to a lack of low‐pressure systems over India. Most atmospheric models have substantial rainfall biases over India, and these results may indicate the circulation patterns responsible.

Effects of horizontal resolution and air–sea coupling on simulated moisture source for East Asian precipitation in MetUM GA6/GC2

Abstract. Precipitation over East Asia in six Met Office Unified Model (MetUM) simulations is compared with observation and ERA-Interim reanalysis. These simulations include three different horizontal resolutions, from low and medium to high, and including atmosphere-only version (Global Atmosphere 6.0; GA6) and air–sea coupling version (Global Coupled 2.0; GC2). Precipitation in simulations is systematically different from that in observations and reanalysis. Increasing horizontal resolution and including air–sea coupling improve simulated precipitation but cannot eliminate bias. Moisture sources of East Asian precipitation are identified using the Water Accounting Model (WAM-2layers) – a moisture tracking model that traces moisture source using collective information of evaporation, atmospheric moisture and circulation. Similar to precipitation, moisture sources in simulations are systematically different from that of ERA-Interim. Major differences in moisture sources include underestimated moisture contribution from tropical Indian Ocean and overestimate contribution from Eurasian continent. By increasing horizontal resolution, precipitation bias over the Tibetan Plateau is improved. From the moisture source point of view, this is achieved by reducing contribution from remote moisture source and enhancing local contribution over its eastern part. Although including air–sea coupling does not necessarily change East Asian precipitation, moisture sources show differences between coupled and atmosphere-only simulations. These differences in moisture sources indicate different types of models biases caused by surface flux or/and atmospheric circulation on different locations. This information can be used to target model biases on specified locations and due to different mechanisms.

Sub‐km scale numerical weather prediction model simulations of radiation fog

AbstractThe numerical weather prediction (NWP) of fog remains a challenge, with accurate forecasts relying on the representation of many interacting physical processes. The recent Local And Non‐local Fog EXperiment (LANFEX) has generated a detailed observational dataset, creating a unique opportunity to assess the NWP of fog events. We evaluate the performance of operational and research configurations of the Met Office Unified Model (MetUM) with three horizontal grid lengths, 1.5 km and 333 and 100 m, in simulating four LANFEX case studies. In general, the subkilometre (sub‐km) scale versions of MetUM are in better agreement with the observations; however, there are a number of systematic model deficiencies. MetUM produces valleys that are too warm and hills that are too cold, leading to valleys that do not have enough fog and hills that have too much. A large sensitivity to soil temperature was identified from a set of parametrisation sensitivity experiments. In all the case studies, the model erroneously transfers heat too readily through the soil to the surface, preventing fog formation. Sensitivity tests show that the specification of the soil thermal conductivity parametrisation can lead to up to a 5‐hr change in fog onset time. Overall, the sub‐km models demonstrate promise, but they have a high sensitivity to surface properties.

Roles of air–sea coupling and horizontal resolution in the climate model simulation of Indian monsoon low pressure systems

The roles of air–sea coupling and horizontal resolution in the representation of Indian monsoon low pressure systems (LPS) in Met Office Unified Model (MetUM) global climate simulations are investigated. To avoid the generally large sea surface temperature (SST) biases in standard coupled atmosphere–ocean global climate models (GCMs), the analysis is performed on experiments from an atmosphere model coupled to a mixed-layer ocean model (MetUM-GOML2), which allows coupling to be applied regionally as well as globally, while constraining the ocean mean state in coupled regions. Compared to the standard AMIP-style MetUM atmosphere-only simulations, the MetUM-GOML2 simulations produce more monsoon LPS, which is attributed to effects of relatively small remaining (Indian Ocean) SST biases that somewhat strengthen the atmospheric monsoon base state. However, the MetUM-GOML2 simulations, all starting from the same atmospheric and oceanic base state, allow for an idealised approach to evaluate the relative effects of coupling and resolution. When the effects of SST biases are excluded, global coupling has a neutral impact on the number of LPS formed, while the associated rainfall is somewhat reduced due to a local negative air–sea feedback reducing the strength of atmospheric convection and weakening individual LPS. The MetUM-GOML2 simulations show particular sensitivity to localised coupling in the Indian and Pacific Oceans, which appears to enhance the effect of monsoon LPS. Although, in contrast to the global coupling comparison, the comparison of regionally coupled simulations is affected by both differences in interannual SST variability and SST biases, and it is likely that this causes at least part of the positive effects from Indian and Pacific Ocean coupling. More importantly, however, is that the effects of air–sea coupling are substantially smaller than the positive effects of the increase in horizontal resolution from N96 (approx. 200 km) to N216 (approx. 90 km). The resolution effect is also larger than that seen in older MetUM configurations.

An evaluation of surface meteorology and fluxes over the Iceland and Greenland Seas in ERA5 reanalysis: The impact of sea ice distribution

AbstractThe Iceland and Greenland Seas are a crucial region for the climate system, being the headwaters of the lower limb of the Atlantic Meridional Overturning Circulation. Investigating the atmosphere–ocean–ice processes in this region often necessitates the use of meteorological reanalyses—a representation of the atmospheric state based on the assimilation of observations into a numerical weather prediction system. Knowing the quality of reanalysis products is vital for their proper use. Here we evaluate the surface‐layer meteorology and surface turbulent fluxes in winter and spring for the latest reanalysis from the European Centre for Medium‐Range Weather Forecasts, i.e., ERA5. In situ observations from a meteorological buoy, a research vessel, and a research aircraft during the Iceland–Greenland Seas Project provide unparalleled coverage of this climatically important region. The observations are independent of ERA5. They allow a comprehensive evaluation of the surface meteorology and fluxes of these subpolar seas and, for the first time, a specific focus on the marginal ice zone. Over the ice‐free ocean, ERA5 generally compares well to the observations of surface‐layer meteorology and turbulent fluxes. However, over the marginal ice zone, the correspondence is noticeably less accurate: for example, the root‐mean‐square errors are significantly higher for surface temperature, wind speed, and surface sensible heat flux. The primary reason for the difference in reanalysis quality is an overly smooth sea‐ice distribution in the surface boundary conditions used in ERA5. Particularly over the marginal ice zone, unrepresented variability and uncertainties in how to parameterize surface exchange compromise the quality of the reanalyses. A parallel evaluation of higher‐resolution forecast fields from the Met Office's Unified Model corroborates these findings.

Models transport Saharan dust too low in the atmosphere: a comparison of the MetUM and CAMS forecasts with observations

Abstract. We investigate the dust forecasts from two operational global atmospheric models in comparison with in situ and remote sensing measurements obtained during the AERosol properties – Dust (AER-D) field campaign. Airborne elastic backscatter lidar measurements were performed on board the Facility for Airborne Atmospheric Measurements during August 2015 over the eastern Atlantic, and they permitted us to characterise the dust vertical distribution in detail, offering insights on transport from the Sahara. They were complemented with airborne in situ measurements of dust size distribution and optical properties, as well as datasets from the Cloud–Aerosol Transport System (CATS) spaceborne lidar and the Moderate Resolution Imaging Spectroradiometer (MODIS). We compare the airborne and spaceborne datasets to operational predictions obtained from the Met Office Unified Model (MetUM) and the Copernicus Atmosphere Monitoring Service (CAMS). The dust aerosol optical depth predictions from the models are generally in agreement with the observations but display a low bias. However, the predicted vertical distribution places the dust lower in the atmosphere than highlighted in our observations. This is particularly noticeable for the MetUM, which does not transport coarse dust high enough in the atmosphere or far enough away from the source. We also found that both model forecasts underpredict coarse-mode dust and at times overpredict fine-mode dust, but as they are fine-tuned to represent the observed optical depth, the fine mode is set to compensate for the underestimation of the coarse mode. As aerosol–cloud interactions are dependent on particle numbers rather than on the optical properties, this behaviour is likely to affect their correct representation. This leads us to propose an augmentation of the set of aerosol observations available on a global scale for constraining models, with a better focus on the vertical distribution and on the particle size distribution. Mineral dust is a major component of the climate system; therefore, it is important to work towards improving how models reproduce its properties and transport mechanisms.

The influence of air–sea coupling on forecasts of the 2016 Indian summer monsoon and its intraseasonal variability

AbstractDaily initialized coupled and uncoupled numerical weather prediction (NWP) forecasts from the global Met Office Unified Model (MetUM) are compared for the 2016 Indian summer monsoon. Three MetUM configurations are used: atmosphere only (ATM), coupled to a mixed‐layer ocean model (KPP), and coupled to a dynamical ocean model (NEMO). The analysis focuses on the impact of air–sea coupling, particularly in the Bay of Bengal (BoB), on NWP for monsoon rainfall. Seasonal‐mean biases in all three configurations are highly consistent and driven by errors in atmospheric processes. Rainfall is initially overestimated over India, but underestimated over the BoB, the latter associated with too much short‐wave radiation and too little cloud cover in MetUM. The excess short‐wave radiation (>40 W·m−2 over the northwest BoB) is partially compensated by additional latent cooling, primarily due to overestimated surface wind speeds. In NEMO and KPP, coupling improves the timing of intraseasonal active and break phases over India, primarily the end of these phases, which are systematically too late in ATM. NEMO and KPP show a more realistic intraseasonal local phase relationship between sea surface temperature (SST) and rainfall throughout the BoB, but no configuration reproduces the observed significant lagged relationship between BoB SST and Indian rainfall. The lack of this relationship may be partly attributed to weak heat flux feedbacks to northern BoB SST, with the forecast short‐wave feedback having systematically the wrong sign (positive) compared to satellite radiation, and thus contributing to SST warming at all lead times. Based on these MetUM forecasts, there is a limited impact of coupling on NWP for monsoon rainfall, both for the mean rainfall and intraseasonal variability. Further research to improve NWP for monsoon rainfall should focus on reducing MetUM atmospheric systematical biases.

Predicting the rapid intensification and dynamics of pre-monsoon extremely severe cyclonic storm ‘Fani’ (2019) over the Bay of Bengal in a 12-km global model

The present study investigates into genesis, intensification, dynamical behavior and the prediction of Extremely Severe Cyclonic Storm (ESCS) ‘Fani' over the Bay of Bengal (BoB) in the National Centre for Medium-Range Weather Forecasting (NCMRWF) global numerical weather prediction (NWP) modeling system ‘NCUM.’ The global model is adopted from the UK Met office's Unified Model (UM). The ESCS ‘Fani' formed from 26 April–04 May 2019, over the warm waters of BoB. In the criterion of landfalling tropical cyclones (TCs), which crossed the Orissa coast, it was the most intense cyclonic storm during pre-monsoon season since 1965. The TC exhibited a markedly different characteristic having genesis very near to the equator (near 2.7°N and 88.7°E) and possessing one of the longest tracks (~3030-km) over the BoB region. The NCUM global model was operationally run during the occurrence of the TC. The diagnosis of the TC's genesis and rapid intensification (RI) in the model is carried out using various metrics such as Genesis potential parameter (GPP), winds at 850-hPa, vertically integrated moisture flux, potential vorticity (PV) at isentropic level 315 K, Severe Weather Threat (SWEAT) index and daily averaged latent heat flux, etc. It is found that the early genesis, structure, RI, and movement of the TC were well captured by the model in advance. The Model predicted TC tracks for a total of seven initial conditions (from 27 April to 03 May 2019, at 24-h interval) are found closely co-related with the observed best track of the TC provided by India Meteorological Department (IMD). The lower values of Direct Position Errors (DPEs), along-track errors (ATEs), and cross-track errors (CTEs) indicate the skillful prediction of the TC by the model. The structure, amplitude, and location (SAL) simulated precipitation of the TC over the BoB and along the central-east coast of India are in agreement with the observed systems. Our detailed diagnostic analysis suggests that the TC formation, development, and intensification was mostly controlled by the warmer BoB sea surface temperatures.

Continuous Structural Parameterization: A Proposed Method for Representing Different Model Parameterizations Within One Structure Demonstrated for Atmospheric Convection

AbstractContinuous structural parameterization (CSP) is a proposed method for approximating different numerical model parameterizations of the same process as functions of the same grid‐scale variables. This allows systematic comparison of parameterizations with each other and observations or resolved simulations of the same process. Using the example of two convection schemes running in the Met Office Unified Model (UM), we show that a CSP is able to capture concisely the broad behavior of the two schemes, and differences between the parameterizations and resolved convection simulated by a high resolution simulation. When the original convection schemes are replaced with their CSP emulators within the UM, basic features of the original model climate and some features of climate change are reproduced, demonstrating that CSP can capture much of the important behavior of the schemes. Our results open the possibility that future work will estimate uncertainty in model projections of climate change from estimates of uncertainty in simulation of the relevant physical processes.

Contributions of the Liquid and Ice Phases to Global Surface Precipitation: Observations and Global Climate Modeling

AbstractThis study is the first to reach a global view of the precipitation process partitioning, using a combination of satellite and global climate modeling data. The pathways investigated are 1) precipitating ice (ice/snow/graupel) that forms above the freezing level and melts to produce rain (S) followed by additional condensation and collection as the melted precipitating ice falls to the surface (R); 2) growth completely through condensation and collection (coalescence), warm rain (W); and 3) precipitating ice (primarily snow) that falls to the surface (SS). To quantify the amounts, data from satellite-based radar measurements—CloudSat, GPM, and TRMM—are used, as well as climate model simulations from the Community Atmosphere Model (CAM) and the Met Office Unified Model (UM). Total precipitation amounts and the fraction of the total precipitation amount for each of the pathways is examined latitudinally, regionally, and globally. Carefully examining the contributions from the satellite-based products leads to the conclusion that about 57% of Earth’s precipitation follows pathway S, 15% R, 23% W, and 5% SS, each with an uncertainty of ±5%. The percentages differ significantly from the global climate model results, with the UM indicating smaller fractional S, more R, and more SS; and CAM showing appreciably greater S, negative R (indicating net evaporation below the melting layer), a much larger percentage of W and much less SS. Possible reasons for the wide differences between the satellite- and model-based results are discussed.

Vertical redistribution of moisture and aerosol in orographic mixed-phase clouds

Abstract. Orographic wave clouds offer a natural laboratory to investigate cloud microphysical processes and their representation in atmospheric models. Wave clouds impact the larger-scale flow by the vertical redistribution of moisture and aerosol. Here we use detailed cloud microphysical observations from the Ice in Clouds Experiment – Layer Clouds (ICE-L) campaign to evaluate the recently developed Cloud Aerosol Interacting Microphysics (CASIM) module in the Met Office Unified Model (UM) with a particular focus on different parameterizations for heterogeneous freezing. Modelled and observed thermodynamic and microphysical properties agree very well (deviation of air temperature <1 K; specific humidity <0.2 g kg−1; vertical velocity <1 m s−1; cloud droplet number concentration <40 cm−3), with the exception of an overestimated total condensate content and too long a sedimentation tail. The accurate reproduction of the environmental thermodynamic and dynamical wave structure enables the model to reproduce the right cloud in the right place and at the right time. All heterogeneous freezing parameterizations except Atkinson et al. (2013) perform reasonably well, with the best agreement in terms of the temperature dependency of ice crystal number concentrations for the parameterizations of DeMott et al. (2010) and Tobo et al. (2013). The novel capabilities of CASIM allowed testing of the impact of assuming different soluble fractions of dust particles on immersion freezing, but this is found to only have a minor impact on hydrometeor mass and number concentrations. The simulations were further used to quantify the modification of moisture and aerosol profiles by the wave cloud. The changes in both variables are on order of 15 % of their upstream values, but the modifications have very different vertical structures for the two variables. Using a large number of idealized simulations we investigate how the induced changes depend on the wave period (100–1800 s), cloud top temperature (−15 to −50 ∘C), and cloud thickness (1–5 km) and propose a conceptual model to describe these dependencies.

Improving the Southern Ocean cloud albedo biases in a general circulation model

Abstract. The present generation of global climate models is characterised by insufficient reflection of short-wave radiation over the Southern Ocean due to a misrepresentation of clouds. This is a significant concern as it leads to excessive heating of the ocean surface, sea surface temperature biases and subsequent problems with atmospheric dynamics. In this study, we modify cloud microphysics in a recent version of the Met Office's Unified Model and show that choosing a more realistic value for the shape parameter of atmospheric ice crystals, in better agreement with theory and observations, benefits the simulation of short-wave radiation. In the model, for calculating the growth rate of ice crystals through deposition, the default assumption is that all ice particles are spherical in shape. We modify this assumption to effectively allow for oblique shapes or aggregates of ice crystals. Along with modified ice nucleation temperatures, we achieve a reduction in the annual-mean short-wave cloud radiative effect over the Southern Ocean by up to ∼4 W m−2 and seasonally much larger reductions compared to the control model. By slowing the growth of the ice phase, the model simulates substantially more supercooled liquid cloud.

Europe-wide precipitation projections at convection permitting scale with the Unified Model

For the first time, we analyze 2.2 km UK Met Office Unified Model convection-permitting model (CPM) projections for a pan-European domain. These new simulations represent a major increase in domain size, allowing us to examine the benefits of CPMs across a range of European climates. We find a change to the seasonality of extreme precipitation with warming. In particular, there is a relatively muted response for summer, which contrasts with much larger increases in autumn and winter. This flattens the hourly extreme precipitation seasonal cycle across Northern Europe which has a summer peak in the present climate. Over the Western Mediterranean, where autumn is the main extreme precipitation season, there is a regional increase in hourly extreme precipitation frequency, but local changes for lower precipitation thresholds are often insignificant. For mean precipitation, decreases are projected across Europe in summer, smaller decreases in autumn, and increases in winter; comparable changes are seen in the driving general circulation model (GCM) simulations. The winter mean increase is accompanied by a large decrease of winter mean snowfall. Comparing the driving GCM projections with the CPM ones, the CPMs show a robust enhanced intensification of precipitation extremes at the convection-permitting scale compared to coarser resolution climate model projections across various European regions for summer and autumn.

Modelling the potential impacts of the recent, unexpected increase in CFC-11 emissions on total column ozone recovery

Abstract. The temporal evolution of the abundance of long-lived, anthropogenic chlorofluorocarbons in the atmosphere is a major factor in determining the timing of total column ozone (TCO) recovery. Recent observations have shown that the atmospheric mixing ratio of CFC-11 is not declining as rapidly as expected under full compliance with the Montreal Protocol and indicate a new source of CFC-11 emissions. In this study, the impact of a number of potential future CFC-11 emissions scenarios on the timing of the TCO return to the 1960–1980 mean (an important milestone on the road to recovery) is investigated using the Met Office's Unified Model (Hewitt et al., 2011) coupled with the United Kingdom Chemistry and Aerosol scheme (UM-UKCA). Key uncertainties related to this new CFC-11 source and their impact on the timing of the TCO return date are explored, including the duration of new CFC-11 production and emissions; the impact of any newly created CFC-11 bank; and the effects of co-production of CFC-12. Scenario-independent relationships are identified between cumulative CFC emissions and the timing of the TCO return date, which can be used to establish the impact of future CFC emissions pathways on ozone recovery in the real world. It is found that, for every 200 Gg Cl (∼258 Gg CFC-11) emitted, the timing of the global TCO return to 1960–1980 averaged values is delayed by ∼0.56 years. However, a marked hemispheric asymmetry in the latitudinal impacts of cumulative Cl emissions on the timing of the TCO return date is identified, with longer delays in the Southern Hemisphere than the Northern Hemisphere for the same emission. Together, these results indicate that, if rapid action is taken to curb recently identified CFC-11 production, then no significant delay in the timing of the TCO return to the 1960–1980 mean is expected, highlighting the importance of ongoing, long-term measurement efforts to inform the accountability phase of the Montreal Protocol. However, if the emissions are allowed to continue into the future and are associated with the creation of large banks, then significant delays in the timing of the TCO return date may occur.

Assessment of the Teleconnection Patterns Affecting July Precipitation in China and Their Forcing Mechanisms in the Met Office Unified Model

AbstractIn this study, we evaluate the ability of the MetUM to reproduce the Silk Road (SR) and Europe–China (EC) teleconnection patterns and their relationship with precipitation over China. The SR and EC patterns are the main modes of interannual variability of July upper-tropospheric meridional wind. The three main factors to the formation of these patterns are analyzed: 1) the tropical precipitation anomalies, which act as a forcing mechanism; 2) the emission of Rossby waves in the Mediterranean–Caspian Sea region; and 3) the basic state of the tropospheric jet over Eurasia. It was found that the model has some difficulty reproducing the main modes of variability in atmosphere-only mode (SR and EC pattern correlation of 0.31 and 0.54, respectively) with some improvement in coupled mode (pattern correlations of 0.56 and 0.44, respectively). Relaxation experiments were used to assess the impact that improving circulation in key regions has on the teleconnections. It was found that nudging wind and temperatures in the forcing regions within the tropics improved the Silk Road pattern whereas nudging in the region where the jet transitions between the North Atlantic Ocean and Eurasian continent—correcting the basic state—had the most impact on the EC teleconnection pattern. This suggests that while the Silk Road pattern is more sensitive to changes in the forcing, the Europe–China pattern is more sensitive to the basic state.

The Role of Local Orography on the Development of a Severe Rainfall Event over Western Peninsular Malaysia: A Case Study

AbstractSevere rainfall events are common in western Peninsular Malaysia. They are usually short and intense, and occasionally cause flash floods and landslides. Forecasting these local events is difficult and understanding the mechanisms of the rainfall events is vital for the advancement of tropical weather forecasting. This study investigates the mechanisms responsible for a local heavy rainfall event on 2 May 2012 that caused flash floods and landslides using both observations and simulations with the limited-area high-resolution Met Office Unified Model (MetUM). Results suggest that previous day rainfalls over Peninsular Malaysia and Sumatra Island influenced the development of overnight rainfall over the Strait of Malacca by low-level flow convergence. Afternoon convection over the Titiwangsa Mountains over Peninsular Malaysia then induced rainfall development and the combination of these two events influenced the development of severe convective storm over western Peninsular Malaysia. Additionally, anomalously strong low-level northwesterlies also contributed to this event. Sensitivity studies were carried out to investigate the influence of the local orography on this event. Flattened Peninsular Malaysia orography causes a lack of rainfall over the central part of Peninsular Malaysia and Sumatra Island and produces a weaker overnight rainfall over the Strait of Malacca. By removing Sumatra Island in the final experiment, the western and inland parts of Peninsular Malaysia would receive more rainfall, as this region is more influenced by the westerly wind from the Indian Ocean. These results suggest the importance of the interaction between landmasses, orography, low-level flow, and the diurnal cycle on the development of heavy rainfall events.