Release Mechanism Research Articles

Carrier-free nano-prodrugs for minimally invasive cancer therapy.

An anticancer nanodrug with few side effects that does not require the use of a nanocarrier, polyethylene glycol, or other additives has been developed. We have fabricated nano-prodrugs (NPDs) composed only of homodimeric prodrugs of the anticancer agent SN-38, which contains a disulfide bond. The prodrugs are stable against hydrolysis but selectively release SN-38 when the disulfide bond is cleaved by glutathione, which is present in high concentrations in cancer cells. The best-performing NPDs showed good dispersion stability in nanoparticle form, and animal experiments revealed that they possess much higher antitumor activity than irinotecan, a clinically applied prodrug of SN-38. This performance was achieved by improving tumor accumulation due to the size effect and targeted drug release mechanism. The present study provides an insight into the development of non-invasive NPDs with high pharmacological activity, and also offers new possibilities for designing prodrug molecules that can release drugs in response to various kinds of triggers.

Mechanisms of slow-release antibacterial properties in chitosan‑titanium dioxide stabilized perilla essential oil Pickering emulsions: Focusing on oil-water interfacial behaviors

Perilla essential oil (PLEO) offers benefits for food preservation and healthcare, yet its instability restricts its applications. In this study, chitosan (CS) and TiO2 used to prepare composite particles. TiO2, after being modified with sodium laurate (SL), was successfully introduced at 0.1 %–3 % into the CS matrix. The resulting CS-SL-TiO2 composite particles can be formed by intertwining and rearranging through intramolecular and intermolecular interactions, and form an O/W interface with stability and viscoelasticity. The Pickering emulsions stabilized by these particles exhibit non-Newtonian pseudoplastic behavior, shear-thinning properties, and slow-release characteristics, along with antibacterial activity. Emulsions with 0.5 % and 1 % CS-SL-TiO2 composites demonstrated superior antibacterial effects against Escherichia coli and Staphylococcus aureus. The study revealed that all emulsions undergo Fickian diffusion and a sustained release of PLEO, with the Ritger-Peppas model best describing this release mechanism. The slow-release behaviors positively correlates with interfacial pressure, composite particle size, composite particle potential, composite contact angle, emulsion particle size and emulsion potential, but negatively correlates with diffusion rate, penetration rate, release kinetics and release rate. The findings lay groundwork for developing slow-release antimicrobial emulsions within polysaccharide matrices, showcasing promise for antimicrobial packaging solutions and enhanced food preservation techniques.

Transdermal microneedles integrating biomimetic self-adjuvant particles for enhanced immunity

Optimal exposure and interaction of subunit antigens with the immune system are crucial for effective immunity. The epidermis and dermis, which harbor a significant population of antigen-presenting cells (APCs) and are broadly connected to the lymphatic system, serve as ideal sites for immunization to fulfill these objectives. However, the stratum corneum barrier severely hinders transdermal delivery of antigens. Here, we developed a transdermal platform integrating yeast-derived biomimetic glucan particles (GPs) and polymeric microneedles to overcome the hurdles and induce effective immunity. GPs served as carriers for encapsulating antigens in a pathogen-like manner. The antigen-loaded particles were concentrated within the tips of polymeric microneedle to solidify as tiny reservoirs, while the needle bodies were shaped using a fast-dissolving matrix. This tip-loaded approach enabled rapid administration for better compliance, followed by an extended antigen release at administration sites, aiming for recruiting more APCs. This microscale platform capacitated a multi-functional approach for subunit vaccine development by optimizing both delivery carriers and dosage forms with modulated release mechanisms to enhance antigen exposure and interaction, thereby promoting effective humoral and cellular immunity.

Effects of Plyometric Training on Running Biomechanics and Jumping Ability of U14 Athletes.

Cardiel-Sánchez, S, Rubio-Peirotén, A, Molina-Molina, A, García-Cebadera Gómez, C, Almenar-Arasanz, A, Ráfales-Perucha, A, Roche-Seruendo, LE, and Cartón-Llorente, A. Effects of plyometric training on running biomechanics and jumping ability of U14 athletes. J Strength Cond Res XX(X): 000-000, 2024-Children under the age of 14 years (U14) are particularly susceptible to musculoskeletal disorders because of growth spurts. Plyometric training has been shown to be beneficial for both injury reduction and performance enhancement. The aim of this study was to evaluate the effects of plyometric training on the jumping ability and running biomechanics of U14 track-and-field athletes. A single-blind randomized controlled trial was conducted. Thirty-five (18 female and 17 male) U14 athletes (age: 12.5 ± 1.2 years; height: 152.3 ± 7.7 cm; body mass: 47.3 ± 6.9 kg) were randomized into experimental and control groups. All subjects completed their usual training for 4 weeks, and those in the intervention group added a low-volume plyometric program twice a week. Preintervention and postintervention assessments included a countermovement jump (CMJ) to determine maximum jump height, 10-second repeated jumps to assess reactive strength index (RSI), and a 3-minute run at 12 km·h-1 to analyze running kinematics contact time, flight time, step length (SL), step frequency (SF), mean power output, vertical spring stiffness, and leg spring stiffness (LSS). The results revealed no main effect of time for any of the variables. A group-by-time interaction was found for RSI (p = 0.045) in the intervention group, whereas a significant increase in LSS was also found after the intervention (p = 0.031). However, no changes in CMJ height or other running parameters were observed. The significance level for the study was set at ρ ≤ 0.05. Plyometric-jump training may improve the stretch-shortening cycle in U14 athletes by increasing RSI and LSS. Athletes and coaches in running-related sports should be aware of these short-term effects when aiming to optimize the energy storage and release mechanism.

Facile synthesis, release mechanism, and life cycle assessment of amine-modified lignin for bifunctional slow-release fertilizer

Biomass-based slow-release fertilizers (SRFs) are a sustainable solution for addressing food scarcity, improving fertilizer efficiency, and reducing pollution, whereas they still face complex preparation, high costs, and low release characteristics. This study introduces a simple and innovative approach to producing bifunctional green SRFs with controlled release and conditioning properties for saline soils and harsh environments. The method involves a one-pot preparation of microsphere-structured amine-modified lignin slow-release fertilizer (L-UX) using biomass lignin as the starting material. The L-UX demonstrates an exceptional fertilizer loading rate (66.2 %) and extended slow-release performance (288 h), effectively enhancing the fertilizer's release ability. Compared to traditional fertilizers, the bifunctional L-UX significantly improves soil water retention capacity (824.3 %), plant growth, and germination percentage in challenging soil conditions (133 %). These findings highlight the potential of L-UX as a large-scale controlled-release fertilizer in harsh environments. A life cycle assessment (LCA) was also conducted to evaluate the environmental impact of L-UX from its production to disposal. This revealed that L-UX has a minimal environmental footprint compared to conventional inorganic fertilizers. This study further supports the widespread application of L-UX as an environmentally friendly alternative.

Suppressing torsional buckling in auxetic meta-shells

Take a thin cylindrical shell and twist it; it will buckle immediately. Such unavoidable torsional buckling can lead to systemic failure, for example by disrupting the blood flow through arteries. In this study, we prevent this torsional buckling instability using a combination of auxeticity and orthotropy in cylindrical metamaterial shells with a holey pattern. When the principal axes of the orthotropic meta-shell are relatively aligned with that of the compressive component of the applied stress during twisting, the meta-shell uniformly shrinks in the radial direction as a result of a local buckling instability. This shrinkage coincides with a softening-stiffening transition that leads to ordered stacking of unit cells along the compressive component of the applied stress. These transitions due to local instabilities circumvent the usual torsional instability even under a large twist angle. This study highlights the potential of tailoring anisotropy and programming instabilities in metamaterials, with potential applications in designing mechanical elements for soft robotics, biomechanics or fluidics. As an example of such applications, we demonstrate soft torsional compressor for generating pulsatile flows through a torsion release mechanism.

Characteristic of epicotyl dormancy and its hormonal regulation in Chinese cork oak (Quercus variabilis)

Emergence heterogeneity caused by epicotyl dormancy contributes to variations in seedling quality during large-scale breeding. However, the mechanism of epicotyl dormancy release remains obscure. We first categorized the emergence stages of Chinese cork oak (Quercus variabilis) using the BBCH-scale. Subsequently, we identified the key stage of the epicotyl dormancy process. Our findings indicated that cold stratification significantly released epicotyl dormancy by increasing the levels of gibberellic acid 3 (GA3) and GA4. Genes associated with GA biosynthesis and signaling also exhibited altered expression patterns. Inhibition of GA biosynthesis by paclobutrazol (PAC) treatment severely inhibited emergence, with no effect on seed germination. Different concentrations (50 μM, 100 μM, and 200 μM) of GA3 and GA4+7 treatments of germinated seeds demonstrated that both can promote the emergence, with GA4 exhibiting a more pronounced effect. In conclusion, this study provides valuable insights into the characterization of epicotyl dormancy in Chinese cork oak and highlights the critical role of GA biosynthesis in seedling emergence. These findings serve as a basis for further investigations on epicotyl dormancy and advancing large-scale breeding techniques.

Phosphate-dependent nuclear export via a novel NES class recognized by exportin Msn5.

Gene expression in response to environmental stimuli is dependent on nuclear localization of key signaling components, which can be tightly regulated by phosphorylation. This is exemplified by the phosphate-sensing transcription factor Pho4, which requires phosphorylation for nuclear export by the yeast exportin Msn5. Unlike the traditional hydrophobic nuclear export signal (NES) utilized by the Exportin-1/XPO1 system, cryogenic-electron microscopy structures reveal that Pho4 presents a novel, phosphorylated 35-residue NES that interacts with the concave surface of Msn5 through two Pho4 phospho-serines that align with two Msn5 basic patches, unveiling a previously unknown mechanism of phosphate-specific recognition. Furthermore, the discovery that unliganded Msn5 is autoinhibited explains the positive cooperativity of Pho4/Ran-binding and proposes a mechanism for Pho4's release in the cytoplasm. These findings advance our understanding of the diversity of signals that drive nuclear export and how cargo phosphorylation is crucial in regulating nuclear transport and controlling cellular signaling pathways.

Slowing Down the "Magic Bullet": Encapsulation of Imatinib in Fe-MOF for Cardiotoxicity Reduction and Improvement in Anticancer Activity.

Imatinib, a small molecule kinase inhibitor, is used as a cancer growth blocker. However, one of its most serious side effects is congestive cardiac failure. Reducing drug toxicity may be achieved through the use of drug delivery systems. Biocompatible metal-organic framework (MOF) materials, namely FeMIL-100 and FeMIL-101-NH2, were employed as potential imatinib carriers. They efficiently delivered the drug as an anticancer agent while minimizing cardiotoxicity. Notably, the release of imatinib from FeMIL-100 was rapid in acidic conditions and slower in pH-neutral environments, allowing targeted delivery to cancer cells. The carrier's pH-dependent stability governed the drug release mechanism. Two release models-Korsmeyer-Peppas and Weibull-were fitted to the experimental data and discussed in terms of drug release from a rigid microporous matrix. Cytotoxicity tests were conducted on two cell lines: HL60 (a model cell line for acute myeloid leukemia) and H9c2 (a cell line for cardiomyocytes). Overall, the metal-organic framework (MOF) carriers mitigated imatinib's adverse effects without compromising its effectiveness.

Coenzyme Q10-loaded microcapsules stabilized by glyceryl monostearate and soy protein isolates-flaxseed gum: Characterization, in vitro release and digestive behavior

This study aimed to stabilize microcapsules with core materials of glyceryl monostearate (GMS) and octyl and decyl glycerate, and wall materials of soy protein isolates (SPI) and flaxseed gum (FG) by complex coacervation method to overcome the drawbacks of coenzyme Q10 (CoQ10). It was demonstrated by the study that the obtained microcapsules were irregular aggregates. Differential scanning calorimetry and x-ray diffraction patterns indicated that CoQ10 was entrapped inside the disordered semisolid cores of microcapsules. The CoQ10 loading and encapsulation efficiency analysis revealed that GMS and FG helped CoQ10 better encapsulated inside the microcapsules. The in vitro release curve showed a “burst” release of CoQ10 absorbed on the surface of microcapsules for the first 180 min, followed by a sustained release of the encapsulated CoQ10. GMS and FG contributed to the sustained release and the release mechanism of the microcapsules was Fickian diffusion. The in vitro simulated digestion demonstrated that the constructed microcapsules improved the bio-accessibility of CoQ10. Finally, due to the protection of GMS and FG, microcapsules had good storage stability. In conclusion, this study emphasized the potential of using new microcapsules to deliver and protect lipophilic ingredients, providing valuable information for developing functional foods with higher bioavailability.

Short-term hyposalinity stress increases dissolved organic carbon (DOC) release by the macroalga Sargassum fallax (Ochrophyta).

Dissolved organic carbon (DOC) released by macroalgae supports coastal ocean carbon cycling and contributes to the total oceanic DOC pool. Salinity fluctuates substantially in coastal marine environments due to natural and anthropogenic factors, yet there is limited research on how salinity affects DOC release by ecologically important macroalgae. Here we determined the effect of short-term salinity changes on rates of DOC release by the habitat-forming fucalean seaweed Sargassum fallax (Ochrophyta). Lateral branches (~4 g) cut at the axes of mature individuals were incubated across a salinity gradient (4-46) for 24 h under a 12:12 light:dark cycle, and seawater was sampled for DOC at 0, 12, and 24 h. Physiological assays (tissue water content, net photosynthesis, respiration, tissue carbon, and nitrogen content) were undertaken at the end of the 24-h experiment. Dissolved organic carbon release increased with decreasing salinity while net photosynthesis decreased. Dissolved organic carbon release rates at the lowest salinity tested (4) were ~3.3 times greater in the light than in the dark, indicating two potential DOC release mechanisms: light-mediated active exudation and passive release linked to osmotic stress. Tissue water content decreased with increasing salinity. These results demonstrate that hyposalinity stress alters the osmotic status of S. fallax, reducing photosynthesis and increasing DOC release. This has important implications for understanding how salinity conditions encountered by macroalgae may affect their contribution to the coastal ocean carbon cycle.

Stabilization and sustained release of rutin dye via eco-friendly Zn/Al-LDH adsorbent: Kinetic, thermodynamic, and antioxidant investigations

This study focuses on the stabilization of rutin dye by intercalating it within Zn/Al-LDH (R-Z/A-L) through co-precipitation (CO) and ion exchange (IO) methods. For the IO method, rutin was intercalated onto Z/A-L using a circulator, achieving an optimal intercalation efficiency of 86.37 % and a capacity of 43.18 mg g−1. Comprehensive characterization of the intercalated compounds was performed using XRD, FTIR, FE-SEM, TEM, TGA, DSC, BET, and XPS techniques, confirming efficient intercalation of rutin into LDH. Kinetic analysis indicated that the pseudo-second-order and intraparticle diffusion models best illustrate the intercalation and release mechanisms, respectively. Isotherm data supported the Langmuir model as the most accurate for describing rutin's intercalation behavior. Thermodynamic investigation disclosed the process to be endothermic and spontaneous. Using the CO method, R-Z/A-L was synthesized under optimal conditions with varying rutin concentrations (5 %, 15 %, and 25 %), achieving maximum intercalation efficiencies and capacities up to 98.15 % and 49.07 mg g−1, respectively. Additionally, the antioxidant activity of the intercalated rutin was evaluated, showing that its integration into the adsorbent allowed for prolonged and consistent release. These results confirm the effectiveness of the Z/A-L adsorbent in enhancing stability.

Immobilization of PCET Materials for Electrochemical pH Swing Driven Carbon Capture

Proton-coupled electron transfer (PCET) is a promising method in the realm of carbon capture and release mechanisms. Its fundamental capacity lies in electrochemically inducing pH swings within an aqueous solution, leveraging the high solubility of carbonates in highly alkaline water to capture CO2 and subsequently release iton demand when the aqueous solution is acidified. PCET-based methods promise higher energy efficiency for carbon capture compared to other electrochemical carbon capture methods because they feature fast charge transfer kinetics and can decouple gas-liquid contact and electrochemical activation. In theory, they also allow the use of cheap, widely available small-molecule PCET agents. However, in practice, PCET agents have shown a key limitation that has, thus far, hindered their scalability: oxygen-induced chemical degradation with continued electrochemical cycling. In this work we mitigate the prevailing issue of oxygen sensitivity by immobilizing PCET agents onto a fabric substrate. Via reactive vapor deposition (RVD), porous and conductive films composed of PEDOT-Cl and poly-aminoanthroquinone (PAAQ) are deposited on the surface of a wool felt blend fabric. This approach resulted in the development of a cost-effective, metal-free, and efficient electrode for both capture and release of CO2. Through electrochemical evaluation, the performance of PCET-active quinone moieties present on PAAQ was measured. The overall efficiency of electrochemical capture from gaseous CO2 was found to be 197 kJ/molCO2, substantiating the efficacy of this novel electrode. This work highlights the potential of fabric-immobilized PCET agents and presents a promising avenue towards a sustainable, efficient, and economically viable approach to carbon capture and release technologies.

Microstructure-Aware Mesoscale Modeling of Chemomechanical Stress Evolution during Cycling in Solid Electrolyte-Cathode Composite

The volume change of cathode active materials during charge-discharge cycling is responsible for the capacity fading of all-solid-state Li batteries due to mechanical degradation in the cathode such as delamination and crack formation. Many strategies to alleviate the chemomechanical stress buildup have been proposed in experiments but rationale of the stress release mechanisms at the mesoscale remain elusive. In this presentation, we present a microstructure-aware mesoscale model to quantitatively predict the stress distribution during cycling in a secondary particle agglomerate of the cathode active material embedded within a solid electrolyte matrix, taking the LiCoO2-Li7La3Zr2O12 (LCO-LLZO) as a model system. We find that the mechanical stress hotspots develop at different stages within the grain boundaries of the LCO agglomerate and the LCO-LLZO interfaces. We investigate the influences of microstructural morphology (columnar versus equiaxial), grain orientations (textured versus random), mechanical properties at the grain boundaries and heterogeneous interfaces, and anisotropy of chemical expansion on the stress hotspot evolution and provide optimal mitigation strategies. The theoretical results can help gain mechanistic understanding on cathode degradation and inform guidelines for experimental design of mechanically optimized cathode materials for long-life solid-state batteries.This work was performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under Contract DE-AC52-07NA27344 and 22-ERD-043.

The structure of the SufS–SufE complex reveals interactions driving protected persulfide transfer in iron-sulfur cluster biogenesis

Fe-S clusters are critical cofactors for redox chemistry in all organisms. The cysteine desulfurase, SufS, provides sulfur in the SUF Fe-S cluster bioassembly pathway. SufS is a dimeric, PLP-dependent enzyme that uses cysteine as a substrate to generate alanine and a covalent persulfide on an active site cysteine residue. SufS enzymes are activated by an accessory transpersulfurase protein, either SufE or SufU depending on the organism, which accepts the persulfide product and delivers it to downstream partners for Fe-S assembly. Here, using E. coli proteins, we present the first X-ray crystal structure of a SufS/SufE complex. There is a 1:1 stoichiometry with each monomeric unit of the EcSufS dimer bound to one EcSufE subunit, though one EcSufE is rotated ∼7° closer to the EcSufS active site. EcSufE makes clear interactions with the α16 helix of EcSufS and site-directed mutants of several α16 residues were deficient in EcSufE binding. Analysis of the EcSufE structure showed a loss of electron density at the EcSufS/EcSufE interface for a flexible loop containing the highly conserved residue R119. An R119A EcSufE variant binds EcSufS but is not active in cysteine desulfurase assays and fails to support Fe-S cluster bioassembly in vivo. 35S-transfer assays suggest that R119A EcSufE can receive a persulfide, suggesting the residue may function in a release mechanism. The structure of the EcSufS/EcSufE complex allows for comparison with other cysteine desulfurases to understand mechanisms of protected persulfide transfer across protein interfaces.

Mitochondrial Dysfunction is a Crucial Immune Checkpoint for Neuroinflammation and Neurodegeneration: mtDAMPs in Focus.

Neuroinflammation is a pivotal factor in the progression of both age-related and acute neurodegenerative disorders, including Alzheimer's disease, Parkinson's disease, amyotrophic lateral sclerosis, multiple sclerosis, and stroke. Mitochondria, essential for neuronal health due to their roles in energy production, calcium buffering, and oxidative stress regulation, become increasingly susceptible to dysfunction under conditions of metabolic stress, aging, or injury. Impaired mitophagy in aged or injured neurons leads to the accumulation of dysfunctional mitochondria, which release mitochondrial-derived damage-associated molecular patterns (mtDAMPs). These mtDAMPs act as immune checkpoints, activating pattern recognition receptors (PRRs) and triggering innate immune signaling pathways. This activation initiates inflammatory responses in neurons and brain-resident immune cells, releasing cytokines and chemokines that damageadjacenthealthy neurons and recruit peripheral immune cells, furtheramplifying neuroinflammation and neurodegeneration. Long-term mitochondrial dysfunction perpetuates a chronic inflammatory state, exacerbating neuronal injury and contributing additional immunogenic components to the extracellular environment. Emerging evidence highlights the critical role of mtDAMPs in initiating and sustaining neuroinflammation, with circulating levels of these molecules potentially serving as biomarkers for disease progression. This review explores the mechanisms of mtDAMP release due to mitochondrial dysfunction, their interaction with PRRs, and the subsequent activation of inflammatory pathways. We also discuss the role of mtDAMP-triggered innate immune responses in exacerbating bothacute and chronic neuroinflammation and neurodegeneration. Targeting dysfunctional mitochondria and mtDAMPs with pharmacological agents presents a promising strategy for mitigating the initiation and progression of neuropathological conditions.

Characterizing seed dormancy in Epimedium brevicornu Maxim.: Development of novel chill models and determination of dormancy release mechanisms by transcriptomics

PurposeEpimedium brevicornu Maxim. is a perennial persistent C3 plant of the genus Epimedium Linn. in the family Berberaceae that exhibits severe physiological and morphological seed dormancy.We placed mature E. brevicornu seeds under nine stratification treatment conditions and explored the mechanisms of influence by combining seed embryo growth status assessment with related metabolic pathways and gene co-expression analysis.ResultsWe identified 3.9 °C as the optimum cold-stratification temperature of E. brevicornu seeds via a chilling unit (CU) model. The best treatment was variable-temperature stratification (10/20 °C, 12/12 h) for 4 months followed by low-temperature stratification (4 °C) for 3 months (4-3). A total of 63801 differentially expressed genes were annotated to 2587 transcription factors (TFs) in 17 clusters in nine treatments (0-0, 0-3, 1-3, 2-3, 3-3, 4-3, 4-2, 4-1, 4-0). Genes specifically highly expressed in the dormancy release treatment group were significantly enriched in embryo development ending in seed dormancy and fatty acid degradation, indicating the importance of these two processes. Coexpression analysis implied that the TF GRF had the most reciprocal relationships with genes, and multiple interactions centred on zf-HD and YABBY as well as on MYB, GRF, and TCP were observed.ConclusionIn this study, analyses of plant hormone signal pathways and fatty acid degradation pathways revealed changes in key genes during the dormancy release of E. brevicornu seeds, providing evidence for the filtering of E. brevicornu seed dormancy-related genes.

Seismic forecasting by gapped wavelet transform for the Río de la Plata craton and adjacent continental platform

Historical and instrumental seismicity from 1845 to the present was compiled for the Pampean regions of Argentina and Uruguay and the adjacent continental platform. These data were analyzed using the Gapped Wavelet Transform (GWT) with the aim of investigating recurrence patterns in the time series.The GWT analysis reveals the existence of periods of seismic activity and periods of seismic silence within the considered area. A 22-year period was determined as the main pattern of seismic activity, during which earthquakes are registered only in 11 years. Based on these results, a probabilistic earthquake forecasting model was created using the Bayesian Machine Learning method, which suggests that the current seismically active period spans from 2011 to 2023 ± 1, with a cessation until 2034 ± 1, while the next seismically active period would begin in 2034 ± 2 ending in 2046 ± 2.These periods or recurrence patterns are interpreted as intervals during which stress accumulates throughout intracrustal faults in the studied area, being then released through various events within the established temporal interval. The accumulation and release mechanisms are still a subject of debate. However, the earthquakes distribution suggests a sublatitudinal arrangement that tends to confirm some correspondence with the controlling faulting of the Quilmes Trough and others transtensional regional lineaments.

Aquasomes: A Promising Delivery Systems for Poorly Soluble Bioactives

Aquasomes are considered an excellent and efficient carrier system for the transport of drugs or biochemically active long chain macromolecules such as proteins and peptides, various hormones, antigens, enzymes, and genes in the recently burgeoning field of nanobiotechnology research. These are three-layer self-collecting structures composed of an oligomeric film covering a strong stage nanocrystalline centre to which biochemically dynamic particles adhere to, independent of changes in the environment and which self-assembles through non-covalent or ionic connections. Aquasomes are circular particles, 60–300 nm in size, that are used to deliver antigens and medications. The structural stability is provided by the solid core, while the active drug molecules are stabilized and protected from dehydration by the polyhydroxy oligomer covering. The most common way to distribute aquasome formulations is parenterally, however recent research indicates that there may be additional, oral, ways as well. A combination of targeted molecular shielding and prolonged release mechanism is used by aquasome to deliver their bioactive chemicals. The present paper offers an overview of the aquasome as a potentially useful medication delivery technique. It covers every facet of aquasome, such as their structure, the processes for preparing them, ways to characterize them, and medical uses as a drug delivery system.

Mixing Order Asymmetry in Nanoparticle-Polymer Complexation and Precipitation Revealed by Isothermal Titration Calorimetry.

In recent years, there has been a renewed interest in complex coacervation, driven by concerted efforts to offer novel experimental and theoretical insights into electrostatic charge-induced association. While previous studies have primarily focused on polyelectrolytes, proteins, or surfactants, our work explores the potential of using cerium (CeO2) and iron (γ-Fe2O3) oxide nanoparticles (NPs) to develop innovative nanomaterials. By combining various charged species, such as polyelectrolytes, charged neutral block copolymers, and coated NPs, we study a wide variety of complexation patterns and compare them using isothermal titration calorimetry, light scattering, and microscopy. These techniques confirm that the titration of oppositely charged species occurs in two steps: the formation of polyelectrolyte complexes and subsequent phase (or microphase) separation, depending on the system studied. Across all examined cases, the entropic contribution to the total free energy surpasses the enthalpic contribution, in agreement with counterion release mechanisms. Furthermore, our investigation reveals a consistent asymmetry in the reaction enthalpy associated with the secondary process, with exothermic profiles observed upon the addition of cationic species to anionic ones and endothermic profiles in the reverse case.