Oscillation Measurements Research Articles

Global constraints on non-standard neutrino interactions with quarks and electrons

We derive new constraints on effective four-fermion neutrino non-standard interactions with both quarks and electrons. This is done through the global analysis of neutrino oscillation data and measurements of coherent elastic neutrino-nucleus scattering (CEνNS) obtained with different nuclei. In doing so, we include not only the effects of new physics on neutrino propagation but also on the detection cross section in neutrino experiments which are sensitive to the new physics. We consider both vector and axial-vector neutral-current neutrino interactions and, for each case, we include simultaneously all allowed effective operators in flavour space. To this end, we use the most general parametrization for their Wilson coefficients under the assumption that their neutrino flavour structure is independent of the charged fermion participating in the interaction. The status of the LMA-D solution is assessed for the first time in the case of new interactions taking place simultaneously with up quarks, down quarks, and electrons. One of the main results of our work are the presently allowed regions for the effective combinations of non-standard neutrino couplings, relevant for long-baseline and atmospheric neutrino oscillation experiments.

Evaluating Novel Protein Phosphatase 2A Activators as Therapeutics for Emphysema.

The activity of PP2A (protein phosphatase 2A), a serine-threonine phosphatase, is reduced by chronic cigarette smoke (SM) exposure and α-1 antitrypsin (AAT) deficiency, and chemical activation of PP2A reduces the loss of lung function in SM-exposed mice. However, the previously studied PP2A-activator tricyclic sulfonamide compound DBK-1154 has low stability to oxidative metabolism, resulting in fast clearance and low systemic exposure. Here we compare the utility of a new more stable PP2A activator, ATUX-792, versus DBK-1154 for the treatment of SM-induced emphysema. ATUX-792 was also tested in human bronchial epithelial cells and a mouse model of AAT deficiency, Serpina1a-e-knockout mice. Human bronchial epithelial cells were treated with ATUX-792 or DBK-1154, and cell viability, PP2A activity, and MAP (mitogen-activated protein) kinase phosphorylation status were examined. Wild-type mice received vehicle, DBK-1154, or ATUX-792 orally in the last 2 months of 4 months of SM exposure, and 8-month-old Serpina1a-e-knockout mice received ATUX-792 daily for 4 months. Forced oscillation and expiratory measurements and histology analysis were performed. Treatment with ATUX-792 or DBK-1154 resulted in PP2A activation, reduced MAP kinase phosphorylation, immune cell infiltration, reduced airspace enlargements, and preserved lung function. Using protein arrays and multiplex assays, PP2A activation was observed to reduce AAT-deficient and SM-induced release of CXCL5, CCL17, and CXCL16 into the airways, which coincided with reduced neutrophil lung infiltration. Our study indicates that suppression of the PP2A activity in two models of emphysema could be restored by next-generation PP2A activators to impact lung function.

Revealing a 3D Fermi Surface Pocket and Electron-Hole Tunneling in UTe_{2} with Quantum Oscillations.

Spin triplet superconductor UTe_{2} is widely believed to host a quasi-two-dimensional Fermi surface, revealed by first-principles calculations, photoemission, and quantum oscillation measurements. An outstanding question still remains as to the existence of a three-dimensional Fermi surface pocket, which is crucial for our understanding of the exotic superconducting and topological properties of UTe_{2}. This 3D Fermi surface pocket appears in various theoretical models with different physics origins, but has not been unambiguously detected in experiment. Here for the first time we provide concrete evidence for a relatively isotropic, small Fermi surface pocket of UTe_{2} via quantum oscillation measurements. In addition, we observed high frequency quantum oscillations corresponding to electron-hole tunneling between adjacent electron and hole pockets. The coexistence of 2D and 3D Fermi surface pockets, as well as the breakdown orbits, provide a test bed for theoretical models and aid the realization of a unified understanding of the superconducting state of UTe_{2} from the first-principles approach.

Unveiling phase diagram of the lightly doped high-Tc cuprate superconductors with disorder removed

The currently established electronic phase diagram of cuprates is based on a study of single- and double-layered compounds. These CuO2 planes, however, are directly contacted with dopant layers, thus inevitably disordered with an inhomogeneous electronic state. Here, we solve this issue by investigating a 6-layered Ba2Ca5Cu6O12(F,O)2 with inner CuO2 layers, which are clean with the extremely low disorder, by angle-resolved photoemission spectroscopy (ARPES) and quantum oscillation measurements. We find a tiny Fermi pocket with a doping level less than 1% to exhibit well-defined quasiparticle peaks which surprisingly lack the polaronic feature. This provides the first evidence that the slightest amount of carriers is enough to turn a Mott insulating state into a metallic state with long-lived quasiparticles. By tuning hole carriers, we also find an unexpected phase transition from the superconducting to metallic states at 4%. Our results are distinct from the nodal liquid state with polaronic features proposed as an anomaly of the heavily underdoped cuprates.

Comparison of inertial records during anticipatory postural adjustments obtained with devices of different masses.

Step initiation involves anticipatory postural adjustments (APAs) that can be measured using inertial measurement units (IMUs) such as accelerometers. However, previous research has shown heterogeneity in terms of the population studied, sensors used, and methods employed. Validity against gold standard measurements was only found in some studies, and the weight of the sensors varied from 10 to 110 g. The weight of the device is a crucial factor to consider when assessing APAs, as APAs exhibit significantly lower magnitudes and are characterized by discrete oscillations in acceleration paths. This study aims to validate the performance of a commercially available ultra-light sensor weighing only 5.6 g compared to a 168-g smartphone for measuring APAs during step initiation, using a video capture kinematics system as the gold standard. The hypothesis is that APA oscillation measurements obtained with the ultra-light sensor will exhibit greater similarity to those acquired using video capture than those obtained using a smartphone. Twenty subjects were evaluated using a commercial lightweight MetaMotionC accelerometer, a smartphone and a system of cameras-kinematics with a reflective marker on lumbar vertebrae. The subjects initiated 10 trials of gait after a randomized command from the experimenter and APA variables were extracted: APAonset, APAamp, PEAKtime. A repeated measures ANOVA with post-hoc test analyzed the effect of device on APA measurements. Bland-Altman plots were used to evaluate agreement between MetaMotionC, smartphone, and kinematics measurements. Pearson's correlation coefficients were used to assess device correlation. Percentage error was calculated for each inertial sensor against kinematics. A paired Student's t-test compared th devices percentage error. The study found no significant difference in temporal variables APAonset and PEAKtime between MetaMotionC, smartphone, and kinematic instruments, but a significant difference for variable APAamp, with MetaMotionC yielding smaller measurements. The MetaMotionC had a near-perfect correlation with kinematic data in APAonset and APAamp, while the smartphone had a very large correlation in APAamp and a near-perfect correlation in APAonset and PEAKtime. Bland-Altman plots showed non-significant bias between smartphone and kinematics for all variables, while there was a significant bias between MetaMotionC and kinematics for APAamp. The percentage of relative error was not significantly different between the smartphone and MetaMotionC. The temporal analysis can be assessed using ultralight sensors and smartphones, as MetaMotionC and smartphone-based measurements have been found to be valid compared to kinematics. However, caution should be exercised when using ultralight sensors for amplitude measurements, as additional research is necessary to determine their effectiveness in this regard.

Revisiting Friedmann-like cosmology with torsion: newest constraints from high-redshift observations

As one of the possible extensions of Einstein's General Theory of Relativity, it has been recently suggested that the presence of space-time torsion could solve problems of the very early and the late-time universe undergoing accelerating phases. In this paper, we use the latest observations of high-redshift data, coming from multiple measurements of quasars and baryon acoustic oscillations, to phenomenologically constrain such cosmological model in the framework of Einstein-Cartan (EC) endowed with space-time torsion. Such newly compiled quasar datasets in the cosmological analysis is crucial to this aim, since it will extend the Hubble diagram to high-redshift range in which predictions from different cosmologies can be distinguished. Our results show that out of all the candidate models, the torsion plus cosmological constant model is strongly favoured by the current high-redshift data, where torsion would be expected to yield the late-time cosmic acceleration. Specially, in the framework of Friedmann-like cosmology with torsion, the determined Hubble constant is in very good agreement with that derived from the Planck 2018 CMB results. On the other hand, our results are compatible with zero spatial curvature and there is no significant deviation from flat spatial hypersurfaces. Finally, we check the robustness of high-redshift observations by placing constraints on the torsion parameter α, which is strongly consistent with other recent works focusing on torsion effect on the primordial helium-4 abundance.

Energetic ion and plasma oscillation measurements during plume mode operation of a hollow cathode

Hollow cathodes are important devices used for spacecraft electric propulsion. The hollow cathode has two operational modes. One mode is a stable mode called the spot mode, and the other is an unstable mode called the plume mode. Operation in plume mode should be avoided since the instability causes high-energy ions that sputter-erode the cathode parts. In this study, the relationship between discharge oscillations and ion energy distribution in plume mode was investigated using a triple Langmuir probe and retarding potential analyzer for a 40-A class xenon hollow cathode with a lanthanum hexaboride emitter. The triple probe can measure unsteady electron temperature and plasma density oscillations. The electron temperature was not so high, 1 to 2 eV. Some instabilities were observed in the plume mode. The ionization instability with a low frequency oscillation of 30 kHz was the dominant mode. A broad spectrum around 330 kHz due to ion acoustic turbulence was observed. In addition, in the downstream plume region, oscillations around 120 kHz were observed owing to temporal change in anomalous resistivity. The 95% ion population voltage found to be 20 and 30 eV in spot and plume modes, respectively. The magnitude of the low frequency ionization oscillation was found to be inversely proportional to ion energy in plume mode. This indicates that the resonant energy transfer from the oscillation to the ion energy through Landau damping probably plays an important role in high energy ion generation in plume mode. A clear correlation between discharge current and electron temperature waveforms was found. The larger the electron temperature fluctuation, the stronger the correlation between discharge current and electron temperature, and the larger the phase difference deviation from 180°.

The design of the ESS neutrino Super Beam ESS[formula omitted]SB for leptonic CP violating measurement and the plans for its further development ESS[formula omitted]SB+

A EC-supported conceptual design study ESSνSB has been carried out during the years 2018–2022 of how the 5 MW linear proton accelerator of the European Spallation Source, currently under construction in Lund, Sweden, can be used to generate a world-uniquely intense neutrino Super Beam for precision measurement of the leptonic CP violating phase δCP. Support for a continuation of this study 2023–2026 has recently been granted by EC. The uniquely high power of the ESS proton linac will allow for the neutrino oscillation measurements to be made at the second oscillation maximum, rather than at the first maximum where other experiments measure, and thereby for a more precise measurement to be made of δCP. This paper describes the results of the conceptual design of ESSνSB lay-out, infrastructure and components as well as of the evaluation of the physics performance for leptonic CP violation discovery and, in particular, for the precision in the measurement if the CP violation phase δCP as well as the plans for the continuation of the work, which will include design studies of a Low energy nuSTORM and an Low Energy Monitored Neutrino Beam.

The Alcock–Paczyński effect from Lyman-α forest correlations: analysis validation with synthetic data

ABSTRACT The three-dimensional distribution of the Ly α forest has been extensively used to constrain cosmology through measurements of the baryon acoustic oscillations (BAO) scale. However, more cosmological information could be extracted from the full shapes of the Ly α forest correlations through the Alcock–Paczyński (AP) effect. In this work, we prepare for a cosmological analysis of the full shape of the Ly α forest correlations by studying synthetic data of the extended Baryon Oscillation Spectroscopic Survey (eBOSS). We use a set of 100 eBOSS synthetic data sets in order to validate such an analysis. These mocks undergo the same analysis process as the real data. We perform a full-shape analysis on the mean of the correlation functions measured from the 100 eBOSS realizations, and find that our model of the Ly α correlations performs well on current data sets. We show that we are able to obtain an unbiased full-shape measurement of DM/DH(zeff), where DM is the transverse comoving distance, DH is the Hubble distance, and zeff is the effective redshift of the measurement. We test the fit over a range of scales, and decide to use a minimum separation of rmin = 25 h−1Mpc. We also study and discuss the impact of the main contaminants affecting Ly α forest correlations, and give recommendations on how to perform such analysis with real data. While the final eBOSS Ly α BAO analysis measured DM/DH(zeff = 2.33) with 4 per cent statistical precision, a full-shape fit of the same correlations could provide an $\sim 2~{{\ \rm per\ cent}}$ measurement.

Cover Picture: Astron. Nachr. 05/2023

Oscillation power spectrum of the Kepler red giant KIC 1027337. The left panel shows the raw spectrum, where the frequency of the maximum oscillation power, νmax, is indicated by two almost coincident vertical lines corresponding to the reference measurement (dashed red and the measurement with the new FRA pipeline (solid black), respectively. The right panel shows the optimally smoothed power spectrum, together with a local fit of oscillations centered around νmax, represented by the orange line. The new Fast, Robust, and Automated (FRA) tool for the detection and measurement of solar-like oscillations in time-series photometry of red-giant stars is described, tested, and validated in detail in the paper by Gehan et al., this issue, e220090.

A Filter-Free Third Overtone Quartz Oscillator Based on Micromachining Technology.

This work investigates an AT-cut quartz crystal oscillator (XO) operating at its enhanced third overtone thickness shear (TS) mode while suppressing the fundamental TS mode by micromachining technology. A unique quartz plate structure has been proposed to alleviate the strong resonant signal from the first mode. A finite-element method (FEM) was used to characterize the first mode suppression while improving the performance of third overtone in terms of Q -factor and motional resistance ( Rm ) of the proposed device. In measurement, the unloaded Q -factor of the fundamental TS mode is from several tens of thousands (the reference design) to only several hundred (the proposed design). Meanwhile, the unloaded Q -factor of the third overtone response for the proposed design could reach Q ∼95 000 with a decent Rm . The Q -factor ratio attains 170-180 between the third overtone and fundamental modes. With the feature of low Q -factor on the fundamental mode, the oscillator system could successfully oscillate at a higher frequency without the help of bandpass filtering. Finally, the closed-loop oscillation measurement is performed for the phase noise (PN) characterization. The PN performance could reach -154.5 dBc/Hz at a 1-kHz offset at the carrier frequency of ∼ 60 MHz. This technique has proven its potential as a future solution of high-frequency quartz oscillator technology.

The DESI Bright Galaxy Survey: Final Target Selection, Design, and Validation

Over the next 5 yr, the Dark Energy Spectroscopic Instrument (DESI) will use 10 spectrographs with 5000 fibers on the 4 m Mayall Telescope at Kitt Peak National Observatory to conduct the first Stage IV dark energy galaxy survey. At z < 0.6, the DESI Bright Galaxy Survey (BGS) will produce the most detailed map of the universe during the dark-energy-dominated epoch with redshifts of >10 million galaxies spanning 14,000 deg2. In this work, we present and validate the final BGS target selection and survey design. From the Legacy Surveys, BGS will target an r < 19.5 mag limited sample (BGS Bright), a fainter 19.5 < r < 20.175 color-selected sample (BGS Faint), and a smaller low-z quasar sample. BGS will observe these targets using exposure times scaled to achieve homogeneous completeness and cover the footprint three times. We use observations from the Survey Validation programs conducted prior to the main survey along with simulations to show that BGS can complete its strategy and make optimal use of “bright” time. BGS targets have stellar contamination <1%, and their densities do not depend strongly on imaging properties. BGS Bright will achieve >80% fiber assignment efficiency. Finally, BGS Bright and BGS Faint will achieve >95% redshift success over any observing condition. BGS meets the requirements for an extensive range of scientific applications. BGS will yield the most precise baryon acoustic oscillation and redshift-space distortion measurements at z < 0.4. It presents opportunities for new methods that require highly complete and dense samples (e.g., N-point statistics, multitracers). BGS further provides a powerful tool to study galaxy populations and the relations between galaxies and dark matter.

Solution for Determining Modulus of Elasticity of Natural Materials Using Vibrations of Non-Uniform Circular Cross-Section Cantilevers.

The article presents an original method for determining the modulus of elasticity of natural materials. A studied solution was based on vibrations of non-uniform circular cross-section cantilevers solved using Bessel functions. The derived equations, together with experimental tests, allowed for calculating the material's properties. Assessments were based on the measurement of the free-end oscillations in time using the Digital Image Correlation (DIC) method. They were induced manually and positioned at the end of a cantilever and monitored in time using a fast Vision Research Phantom v12.1 Camera with 1000 fps. GOM Correlate software tools were then used to find increments of deflection on a free end in every frame. It provided us with the ability to make diagrams containing a displacement-time relation. To find natural vibration frequencies, fast Fourier transform (FFT) analyses were conducted. The correctness of the proposed method was compared with a three-point bending test performed on a Zwick/Roell Z2.5 testing machine. The presented solution generates trustworthy results and can provide a method to confirm the elastic properties of natural materials obtained in various experimental tests.

Epileptic seizures detection and the analysis of optimal seizure prediction horizon based on frequency and phase analysis.

Changes in the frequency composition of the human electroencephalogram are associated with the transitions to epileptic seizures. Cross-frequency coupling (CFC) is a measure of neural oscillations in different frequency bands and brain areas, and specifically phase-amplitude coupling (PAC), a form of CFC, can be used to characterize these dynamic transitions. In this study, we propose a method for seizure detection and prediction based on frequency domain analysis and PAC combined with machine learning. We analyzed two databases, the Siena Scalp EEG database and the CHB-MIT database, and used the frequency features and modulation index (MI) for time-dependent quantification. The extracted features were fed to a random forest classifier for classification and prediction. The seizure prediction horizon (SPH) was also analyzed based on the highest-performing band to maximize the time for intervention and treatment while ensuring the accuracy of the prediction. Under comprehensive consideration, the results demonstrate that better performance could be achieved at an interval length of 5 min with an average accuracy of 85.71% and 95.87% for the Siena Scalp EEG database and the CHB-MIT database, respectively. As for the adult database, the combination of PAC analysis and classification can be of significant help for seizure detection and prediction. It suggests that the rarely used SPH also has a major impact on seizure detection and prediction and further explorations for the application of PAC are needed.

Laser triangulation measurement of blade oscillation in a transonic compressor cascade

The paper describes a method for optical measurement of oscillation of blades in a linear cascade designed for flutter research. The method uses laser triangulation, which measures the distance between the sensor and the oscillation object. The distance can be recalculated to angular displacement of the blade. However, the relation is nonlinear due to the curvature of the blade. The nonlinear dependence between the distance and angular displacement is derived and quantified analytically. The paper further analyzes the influence of light refraction in the optical window, surface quality and sensor inclination. A procedure for the nonlinear calibration is proposed and used during wind tunnel measurements in a blade cascade with forced oscillation of the middle blade.

Phenotypic screening using waveform analysis of synchronized calcium oscillations in primary cortical cultures.

At present, in vitro phenotypic screening methods are widely used for drug discovery. In the field of epilepsy research, measurements of neuronal activities have been utilized for predicting efficacy of anti-epileptic drugs. Fluorescence measurements of calcium oscillations in neurons are commonly used for measurement of neuronal activities, and some anti-epileptic drugs have been evaluated using this assay technique. However, changes in waveforms were not quantified in previous reports. Here, we have developed a high-throughput screening system containing a new analysis method for quantifying waveforms, and our method has successfully enabled simultaneous measurement of calcium oscillations in a 96-well plate. Features of waveforms were extracted automatically and allowed the characterization of some anti-epileptic drugs using principal component analysis. Moreover, we have shown that trajectories in accordance with the concentrations of compounds in principal component analysis plots were unique to the mechanism of anti-epileptic drugs. We believe that an approach that focuses on the features of calcium oscillations will lead to better understanding of the characteristics of existing anti-epileptic drugs and allow to predict the mechanism of action of novel drug candidates.

Temperature-dependent and magnetism-controlled Fermi surface changes in magnetic Weyl semimetals

Quantum oscillation measurements reveal that in magnetic Weyl semimetals NdAlSi and CeAlSi${}_{0.8}$Ge${}_{0.2}$, the areas of extremal orbits on Fermi surfaces change remarkably with varying temperature; such changes depend on the local spin configurations and magnetic-field directions. The temperature dependence of Fermi surfaces is demonstrated to be a result of the exchange coupling between the localized 4$f$ electrons and the itinerant 5$d$ electrons.

High quantum oscillation frequencies and nontrivial topology in kagome superconductor KV3Sb5 probed by torque magnetometry up to 45 T

Here, we present the Fermi surface properties of the kagome superconductor ${\mathrm{KV}}_{3}{\mathrm{Sb}}_{5}$ using torque magnetometry at applied fields up to 45 T and temperatures down to that of liquid $^{3}\mathrm{He}$ (0.32 K). The torque signal shows clear de Haas--van Alphen (dHvA) oscillations with 14 major frequencies ranging from $\ensuremath{\sim}33$ to 2149 T, nine of which are higher frequencies (above 500 T) that have never been reported in ${\mathrm{KV}}_{3}{\mathrm{Sb}}_{5}$. Angular dependence measurements of the dHvA oscillations were carried out to investigate the dimensionality of the Fermi surface. Based on our analysis, several frequencies follow the $1/\mathrm{cos}\phantom{\rule{0.16em}{0ex}}\ensuremath{\theta}$ dependence, where $\ensuremath{\theta}$ is the tilt angle with respect to the applied field direction and oscillations disappear above $\ensuremath{\theta}={60}^{\ensuremath{\circ}}$, which suggest that Fermi surfaces corresponding to these frequencies are quasitwo dimensional. The Berry phase (${\mathrm{\ensuremath{\Phi}}}_{\mathrm{B}}$), determined by constructing a Landau level fan diagram, was found to be ${\mathrm{\ensuremath{\Phi}}}_{\mathrm{B}}\ensuremath{\sim}\ensuremath{\pi}$, which strongly suggests the nontrivial topology of ${\mathrm{KV}}_{3}{\mathrm{Sb}}_{5}$. To explain the experimental results, we carried out band-structure and Fermi-surface calculations using density functional theory (DFT) for both pristine and charge-density wave (CDW) phases. We found that the Fermi surface undergoes severe reconstruction in the CDW phase and, more importantly, our calculation results are in reasonable agreement with the experimentally measured Fermi-surface frequencies. The observation in this paper of very high quantum oscillation frequencies in ${\mathrm{KV}}_{3}{\mathrm{Sb}}_{5}$ and the determination of their detailed Fermi-surface properties, along with the analyses of corresponding DFT calculation results, are crucial for understanding CDW order, unconventional superconductivity, and nontrivial topology in $A{\mathrm{V}}_{3}{\mathrm{Sb}}_{5}\phantom{\rule{0.28em}{0ex}}(A=\mathrm{K},\mathrm{Rb},$ and Cs), as well as the interplay among them.

The relationships between direct substituents, aromaticity and kinetic stability of pentazole ring

The two directly substituted pentazoles, N5NH2 and N5COOH, were designed to theoretically study the relationships between substituents, aromaticity and kinetic stability thereof. Analysis shows their kinetic stability order described by the energy separations between the highest occupied molecule orbital (HOMO) and the lowest unoccupied molecule orbital (LUMO), viz. HOMO-LUMO gap, is line with the aromaticity orders obtained from nucleus-independent chemical shift (NICS), harmonic oscillator measure of aromaticity (HOMA), Bird aromaticity index (I) and isochemical shielding surface (ICSS), which is N5NH2 > N5COOH. But this order is contrary to the heat stability order according to Ref [1] The inconsistency between heat stability and kinetic stability reveals the fact that stability of compounds is a complex character and different according to the compound property of the study. The consistency of kinetic stability order with the aromaticity orders described by NICS, NICSSZZ, HOMA, I and ICSS indicates these widely accepted methods for aromaticity estimating are reliable for the two given compounds. As for the effect on aromaticity of pentazole ring from substituent, electron-donating substituent have stronger effect than electron-withdrawing substituent.

Detrending and Denoising of Industrial Oscillation Data

Industrial oscillation recordings are often corrupted by underlying nonstationary trend and noisy artifacts, which can occlude features of interest and complicate subsequent oscillation detection and diagnosis. However, there are considerably fewer techniques available in the literature for systematically removing both trend and noise terms from the oscillation measurements. To cater for the general detrending and denoising needs of oscillatory signals, this paper proposes an integrated framework featuring the following steps: (i) The ensemble empirical mode decomposition is first adopted to decompose the industrial single-loop data into several Intrinsic Mode Functions (IMFs). (ii) To eliminate the trend term, a surrogate-based nonstationarity testing algorithm is implemented to automatically identify and remove the requisite IMFs. (iii) By applying canonical correlation analysis on the remained IMFs, the noise-dependent components can be further isolated, which finally yields the detrended and denoised oscillation data. We conducted performance comparison study through extensive simulations and industrial examples. The results demonstrate that the proposed work is a promising tool for industrial oscillation data preprocessing.