Maximum Magnetic Entropy Research Articles

Crystal structure, magnetic property and cryogenic magnetocaloric effect of Gd4Al2O9 aluminate

Developing magnetic materials with excellent magnetocaloric effect (MCE) is a vital prerequisite for practical magnetic refrigeration (MR) applications. Herein, a single-phased polycrystalline Gd4Al2O9 compound was fabricated using the co-precipitation method, and its structure, magnetic property together with magnetocaloric performance were investigated. The Gd4Al2O9 compound was found to crystallize in the monoclinic structure space group P21/c with lattice parameters a = 7.4852 Å, b = 10.5561 Å, c = 11.1774 Å, β = 108.95° and V=835.3107 Å3, and the constituent elementals had valence states of Gd3+, Al3+ and O2−. Excellent comprehensive MCE performance was observed for the Gd4Al2O9 compound in low-temperature regions. The obtained values of maximal magnetic entropy change, temperature-averaged entropy change (3 K) and relative cooling power under the magnetic flux density change of 0–7 T are 26.31 J/kg·K, 25.09 J/kg·K and 317.05 J/kg. The Gd4Al2O9 compound shows impressive comprehensive MCE performances compared with some recently reported rare earth-based MR materials with prominent performances, meaning that it is a suitable candidate material for low-temperature MR applications.

Structure, Optical Properties and Magnetocaloric Effects in Gd3Fe5O12 Garnet Synthesized by Solid State Method

In this work, gadolinium iron garnet (Gd3Fe5O12) was synthesized using the solid-state ceramic method. The structural analysis, confirmed through Rietveld refinement, indicated the formation of a single-phase garnet structure. Scanning electron microscopy studies revealed uniform grain size and homogeneity in the sintered material, while UV-vis absorption studies showed a peak at 300 nm, indicating strong ultraviolet interaction and an optical band gap of 3.64 eV, suggesting optoelectronic potential. The fluorescence emission spectrum shows a band at 435 nm, while the excitation spectrum exhibits bands at 275 and 360 nm. The magnetic measurements demonstrated Gd ion ordering at low temperatures, with a compensation temperature around 290 K. Arrott plots confirmed the second-order magnetic phase transition. Importantly, Gd3Fe5O12 exhibited both normal and inverse magnetocaloric effects, with a maximum magnetic entropy change of 1.05 J kg–1 K–1 at 230 K under 9 T magnetic field. These properties indicate Gd3Fe5O12 material as a promising candidate for magnetic refrigeration and optoelectronic applications.

Optimizing Room‐Temperature Thermoelectric and Magnetocaloric Performance via Constructing Multi‐Scale Interfacial Phases in LaFeSi/BiSbTe Thermo‐Electro‐Magnetic Refrigeration Materials

AbstractFabricating a thermo‐electro‐magnetic material that exhibits simultaneously excellent magnetocaloric (MC) and thermoelectric (TE) performance is challenging since the interfacial reaction causes severe deterioration of MC and TE performance. In this work, a construction of multi‐scale interfaces in LaFe10.4Co0.8Si1.8/Bi0.5Sb1.5Te3 (LFS/BST) composites is realized by adopting a low‐temperature high‐pressure sintering strategy. It is revealed in the atomic‐scale that the interfacial reaction between LFS and BST leads to the formation of (Fe,Co)(Sb,Te)2 micro‐grains and LaTe2 nano‐grains, and the latter form low‐mismatch phase boundaries with LFS matrix. Benefiting from the multi‐scale interfacial phases, excellent MC performance of LFS is preserved alongside a minor impact on TE properties, e.g., a peak zT of 1.04 and a small decrease of 3.0% in relative cooling power are achieved in the 2%LFS/BST composite. Compared with other thermo‐electro‐magnetic materials, a good trade‐off between MC and TE performance is realized in LFS/BST composites with simultaneously high MC and TE performance. The 20%LFS/BST composite exhibits a room‐temperature zT of 0.46 with large maximum magnetic entropy change and relative cooling power of 0.81 J kg−1 K−1 and 44.83 J kg−1, respectively. This work provides an effective material design for developing the all‐solid‐state MC/TE hybrid refrigeration technique.

Excellent Magnetocaloric Properties near 285 K of Amorphous Fe88Pr6Ce4B2 Ribbon

A novel amorphous Fe88Pr6Ce4B2 ribbon with better magnetocaloric properties near 285 K is reported in the present work. The Fe88Pr6Ce4B2 ribbon exhibits a typical second-order ferromagnetic–paramagnetic transition near its Curie temperature (Tc, ~284 K), with a maximum magnetic entropy change (−ΔSmpeak) of ~4.15 J/(kg × K) under 5 T and a maximum adiabatic temperature rise (ΔTad) of ~2.57 K under 5 T, both of which are almost the largest amongst the iron-based metallic glasses with Tc = 285 ± 10 K. The high −ΔSmpeak enables several amorphous hybrids with table-like −ΔSm–T curves to be synthesized by appropriately proportioning the Fe88Pr6Ce4B2 ribbon and other amorphous ribbons with different Tc. The larger average −ΔSm and effective refrigeration capacity, as well as the appropriate temperature range, make the two amorphous hybrids potential candidates for use as refrigerants in household magnetic air conditioners.

Magnetic properties and magnetocaloric effect in thiospinel Fe1-xCuxCr2S4 (x = 0.0, 0.5) compounds

In this study, we investigate the magnetic and magnetocaloric properties of Cr-based spinel sulphides Fe1-xCuxCr2S4 (x = 0.0 and x = 0.5). The magnetic transition temperature of FeCr2S4 (176 K) increases to 330 K when 50 % of Fe in FeCr2S4 structure is substituted with Cu. Temperature-dependent Zero-Field-Cooled (ZFC) and Field-Cooled (FC) magnetic moment measurements show a paramagnetic (PM) to ferrimagnetic (FiM) phase transition in our samples. Magnetocaloric properties were investigated through magnetization isotherm measurements. The maximum magnetic entropy change values are −2.78 J/kg. K and −2.11 J/kg. K under 5 T magnetic field, for x = 0 and x = 0.5 in Fe1-xCuxCr2S4, respectively. Analysis of phenomenological universal curves and Arrott plots indicate a second-order magnetic transition for both compounds. Consequently, Fe0.5Cu0.5Cr2S4 emerges as a promising candidate for magnetic refrigeration applications due to its considerable high magnetic entropy change and its proximity to room temperature transition.

Effects of Eu3+ doping on the structural, magnetocaloric effect and critical behavior of Ruddlesden-Popper compounds La1.4-xEuxSr1.6Mn2O7 (0 ≤ x ≤ 0.1)

The effects of Eu3+ doping on the structural and magnetocaloric effect of Ruddlesden-Popper compounds La1.4-xEuxSr1.6Mn2O7 (0 ≤ x ≤ 0.1) were investigated. The X-ray diffraction and infrared spectroscopy confirmed that La1.4-xEuxSr1.6Mn2O7 compounds exhibited the tetragonal lattice symmetry (I4/mmm) of the Ruddlesden-Popper phase. The crystal structure of La1.4-xEuxSr1.6Mn2O7 compounds distorted and phase separated as the amount of Eu3+ doping varied. The magnetization-temperature curves demonstrated that La1.4-xEuxSr1.6Mn2O7 compounds display a notable transition temperature attributed to its anisotropic exchange coupling. The maximum magnetic entropy changes (−ΔSMmax) of La1.4-xEuxSr1.6Mn2O7(x = 0, 0.075, and 0.1) compounds are 2.82, 3.12 and 3.40 J/(kg·K) at the 5 T applied magnetic field. Meanwhile, its relative cooling power (RCP) was 186.37, 207.42 and 242.54 J/kg, respectively. The critical behavior of La1.4-xEuxSr1.6Mn2O7 (0≤x≤0.1) compounds was analyzed around Tc, and it was found that the critical index (β = 0.413, γ = 1.020, δ = 3.038) is essentially in line with the mean field theory.

Advanced Anti-icing and Deicing Strategies for Overhead Power Transmission Lines Based on Giant Magnetocaloric Effect of La0.7Ca0.254Sr0.046MnO3.

Perovskite manganates (AMnO3) exhibit diverse structural, thermal, electrical, and magnetic properties. Their strong magnetocaloric effect (MCE) near the Curie temperature (TC) makes them ideal for magnetic-thermal anti-icing and deicing in power transmission lines. Below TC, ferromagnetic AMnO3 produces heat through multiple mechanisms, with the changing magnetic field induced by the strong AC current, causing heat through magnetic hysteresis and eddy currents, alongside the direct MCE. Above TC, no heating is generated, as MCE is unfavorable, thus preventing additional energy loss at elevated temperatures. In this work, La0.7Ca0.254Sr0.046MnO3 with TC close to 0 °C were synthesized by solid-state reaction. It is found that particle size >10 μm is beneficial for a large MCE, based on the results of particle size dependence of MCE. The resulting maximum magnetic entropy change at 277 K is 7.69 J·kg-1·K-1, and an adiabatic temperature change of 3.87 K at 277 K is achieved under 5 T. The prototype cable is fabricated using a well-established wire drawing process. A climate-simulation chamber is employed for the anti-icing and deicing experiments. The prototype cables demonstrated a strong capability for deicing and anti-icing. This simple and cost-effective prototype cable shows significant potential for mitigating the icing problem of overhead high-voltage power transmission lines.

Tuning the magnetocaloric and structural properties of La0.67Sr0.28Pr0.05Mn1–xCoxO3 refrigeration materials

Abstract The structural, magnetic and magnetocaloric properties of perovskite manganites La0.67Sr0.28Pr0.05Mn1−x Co x O3 (x = 0.05, 0.075 and 0.10) (LSPMCO) are investigated. LSPMCO crystallizes as a rhombohedral structure with R-3c space group. As the Co content increases, the cell volume expands, the Mn–O–Mn bond angle reduces and the length of the Mn–O bond increases. The samples show irregular submicron particles under a Zeiss scanning electron microscopy. The particle size becomes larger with increasing doping. The chemical composition of the samples is confirmed by x-ray photoelectron spectroscopy (XPS). The ferromagnetic (FM) to paramagnetic (PM) phase transition occurs near the Curie temperature (T C), and all transitions are second-order phase transitions (SMOPT) characterized by minimal thermal and magnetic hystereses. Critical behavior analysis indicates that the critical parameters of LSPMCO closely align with those predicted by the mean-field model. The T C declines with Co doping and reaches near room temperature (302 K) at x = 0.075. The maximum magnetic entropy change ( − Δ S M max ) at x = 0.05 is 4.27 J/kg⋅K, and the relative cooling power (RCP) peaks at 310.81 J/K. Therefore, the system holds significant potential for development as a magnetic refrigeration material, meriting further professional and objective evaluation.

Critical behavior and tunable magnetocaloric effect in (Gd1-xErx)3Al2 alloys

The magnetic properties, magnetocaloric effect, and the critical behavior near Curie temperature (TC) were systematically studied in a series of (Gd1-xErx)3Al2 (x = 0, 0.1, 0.2, 0.3) alloys. As the Er content increases, both the TC and lattice constant gradually decrease. The maximum magnetic entropy change and refrigerant capacity remain relatively high, ranging from −5.8 to −8.5J/kg K and 209.0 to 290.8 J/kg respectively, for a field change of 5 T. The critical exponents, derived from the field dependence of magnetic entropy change, conform to scaling theory and are consistent with those obtained using the Kouvel–Fisher method. These findings suggest that the reliability of the obtained critical exponents and imply the presence of long-range exchange interactions in (Gd1-xErx)3Al2 alloys.

The crystal structures, magnetic interactions and cryogenic magnetocaloric effects for NaGdXO4 (X=Si, Ti) compounds

The development of ultra-low temperature magnetic refrigeration technologies demands magnetic refrigeration materials with excellent properties. Hence, improving performances of magnetic refrigerants has always been a significant scientific issue in magnetic refrigeration field. In this article, the relationship of crystal structures, magnetic interactions and magnetocaloric effect (MCE) for NaGdSiO4 and NaGdTiO4 has been investigated. NaGdSiO4 and NaGdTiO4 both crystallizes orthogonal structure, but the significant difference of unit cell parameters and symmetries results in different arrangement of Gd atoms. The distorted crystal structure and weaker magnetic between Gd3+ ions make NaGdSiO4 exhibit larger MCE with the maximum magnetic entropy change (-∆SM) of 49.0J·kg-1·K-1 at 2.8K. Comparably speaking, NaGdTiO4, which is a quasi-triangular antiferromagnet, possesses a stronger magnetic interaction between Gd3+ ions with the maximum -∆SM of 31.9J·kg-1·K-1 at 2.6K. These results confirm the importance of magnetic interactions for magnetic refrigeration materials, and, more broadly, they highlight the significance of crystal structures in that field.

Effect of polymer coating on magnetocaloric properties of garnet

In this study, Gd3Fe5O12 nanoparticles were synthesized using the sol–gel autocombustion method and subsequently coated with polyvinylpyrrolidone (PVP) polymer. The study focuses on understanding the influence of PVP coating on garnet particles’ magnetic and magnetocaloric properties. The crystallite size upon PVP-coating remained unaltered, but the grain size and surface area of coated particles increased. The magnetization of PVP-coated particles decreased by around 11% as compared to the uncoated particles at 5 K. Mössbauer and photoelectron spectroscopy confirmed the presence of a paramagnetic phase Fe3+ in the PVP-coated nanoparticles responsible for the reduction in magnetization value. The maximum value of magnetic entropy change (−ΔS m ) for uncoated Gd3Fe5O12 was 3.78 Jkg−1 K−1 at 37.5 K with a 5T applied field, accompanied by a relative cooling power (RCP) of 382 Jkg−1. On the other hand, for PVP-coated Gd3Fe5O12, the maximum −ΔS m was 3.38 Jkg−1 K−1 at 57.5 K with a 5T applied field, and the RCP was 308 Jkg−1. The observed maximum magnetic entropy changes at higher temperatures for the PVP-coated Gd3Fe5O12 sample are noteworthy. This characteristic indicates that the PVP-coated garnet may have an advantage in terms of usability over a wider temperature range compared to the uncoated counterpart, which can potentially be a promising material for applications in cryogenic temperature magnetic refrigeration.

The Influence of Sn Addition on the Magnetocaloric Effects, Magnetic and Mechanical Properties of Fe<sub>2</sub>P-Type Mn-Fe-P-Si Compounds

Mn1.25Fe0.65-xSnxP0.50Si0.50 (0, 0.02, 0.04, 0.05, 0.06, 0.08, 0.09, 0.10, 0.20) series compounds were prepared by mechanical alloying and solid-phase sintering, and their mechanical and magnetic properties were studied. The XRD measurement results show that all the compounds crystalize in Fe2P hexagonal structures, with a space group of P-62m. With the increase in Sn content, the compressive strength is significantly improved, the Curie temperature of the compound gradually decreases, and the nature of magnetic transition is tuned from a weak to strong first-order one, which is confirmed by the increase of thermal hysteresis of the compounds. The maximum magnetic entropy change of the compound increases from 9.3 J/kg·K at x = 0 to 17.2 J/kg·K at x = 0.04 under a magnetic field change of 0 - 3 T.

Inverse and conventional dual magnetocaloric effects in Ni substituted Y-type Sr2Zn2-xNixFe12O22 hexaferrites

The effects of Ni substitution on magnetic and magnetocaloric effect (MCE) are investigated in polycrystalline Y-type hexaferrites of Sr2Zn2-xNixFe12O22 (x = 0.0, 0.8, and 2.0). With the increasing of temperature, the M-T curves indicate successive magnetic structure transitions exist in Sr2Zn2-xNixFe12O22 (x = 0.0, 0.8, and 2.0), which play significant roles in MCE behaviors. As the Ni2+ doping ratio increases, the shape of −ΔSM−T curves near room temperature evolves gradually from a table-like to a peak-like form. Particularly, a significant contrast between CMCE and IMCE is observed below 100 K, whose behavior can be inherently exploited for heat sink in magnetic refrigeration applications. Among the samples in this series, Sr2Zn1.2Ni0.8Fe12O22 plays the best CMCE and IMCE performances, with the maximum magnetic entropy change (−ΔSMmax) values of 0.78 J/kg K at 354 K and −0.56 J/kg K at 16 K for ΔH=50kOe , respectively. Our work demonstrates that Sr2Zn2-xNixFe12O22 hexaferrites have great potential to be tailored for magnetic refrigeration with special needs such as different operating temperature zones, Ericsson cycle or heat sink at refrigeration.

Crystal growth and magnetocaloric effect of Li9Fe3(P2O7)3(PO4)2 with Kagome lattice

With the growing demand for low-temperature technologies, magnetic refrigeration, which is based on magnetocaloric effect (MCE) of magnetic materials, has attracted increasing attention. In this work, Li9Fe3(P2O7)3(PO4)2 (LFPP) crystals have been grown by the high-temperature flux method. The crystal structural characterization is analyzed, and its magnetocaloric effect (MCE) is in detail investigated for the first time. The maximum magnetic entropy changes (−ΔSM) of LFPP under a field change of 0–7 T are determined to be 4.6 J/kg·K (H⊥c) and 4.1 J/kg·K (H//c) at 4 K and 5 K, respectively. The slow decrease of −ΔSM around the phase transition temperature implies that LFPP has a large refrigeration temperature range.

Insight into the Structural and Magnetic Properties of PrZnSi and NdZnSi Compounds Featuring Large Low-Temperature Magnetocaloric Effects.

The magnetocaloric (MC) and magnetic phase transition (MPT) properties in various types of rare earth (RE)-based magnetic materials have been intensively investigated recently, which are aimed at developing suitable MC materials for low-temperature cooling applications and better elucidating their inherent physical properties. We herein provide a combined experimental and theoretical investigation into two new light RE-based magnetic materials, namely, PrZnSi and NdZnSi compounds, regarding their structural, magnetic, MPT, and low-temperature MC properties. Both of these compounds crystallize in an AlB2-type hexagonal structure with a symmetry of the crystallographic space group P6/mmm and reveal a typical second-order-type MPT with ordering temperatures (TC) at approximately 13.5 and 18.5 K for PrZnSi and NdZnSi compounds, respectively. Moreover, they all exhibit large reversible low-temperature MC effects and remarkable performances, which are identified by the parameters of maximum magnetic entropy changes, relative cooling power, and temperature-averaged entropy change (temperature lift 5 K). The deduced values of these MC parameters under a magnetic field change of 0-7 T reach 16.3 J/kgK, 294.46 J/kg, and 15.79 J/kgK for PrZnSi and 15.4 J/kgK, 284.84 J/kg, and 14.95 J/kgK for NdZnSi, respectively, which are evidently better than those of most updated light RE-based magnetic materials with remarkable low-temperature MC performances, indicating that PrZnSi and NdZnSi compounds hold potentials for practical cooling applications.

Excellent magnetocaloric effect near the hydrogen liquefaction temperature of a binary Er67.5Co32.5 metallic glass

We reported the excellent magnetocaloric effect of a binary Er67.5Co32.5 metallic glass (MG) near the hydrogen liquefaction temperature. The binary MG ribbon was fabricated by a melt-spinning method. The Er67.5Co32.5 alloy exhibits a better glass formability than most of other rare earth (RE)-Co binary alloys. The maximum magnetic entropy change (−ΔSmpeak) and refrigeration capacity (RC) of the Er67.5Co32.5 amorphous ribbon under 0–5 T reach to 17.47 J/(kg × K) near its Curie temperature (Tc, ∼ 11 K) and 472 J/kg, both of which are rather high among the RE-based MGs with a Tc around 10 K and imply the potential application perspective as magnetic refrigerants for hydrogen liquefaction. The magnetization as well as magnetocaloric behaviors of the binary MG were observed, and the mechanism involved was investigated.

Influences on the structure, magnetic, and magnetocaloric effect of La0.8Sr0.2MnO3 ceramics by Co ion doping with sol-gel method and first-principles calculations

This paper investigated the impact of Co ions doping on the structure, magnetic properties, and magnetocaloric effect for La0.8Sr0.2Mn1-xCoxO3 ceramics (LSMCO) by sol-gel method and first-principles calculations The use of first-principles calculations was provided for subsequent experiments. The sol-gel preparation of LSMCO ceramics and sintered at 950 °C for 10 h. It was shown that the samples' cell volume and lattice constants changed slightly with increasing Co2+ doping but remained a rhombohedral structure (No.167, R-3c space group) by statistics of TEM and XRD. The average particle size for the LSMCO ceramics ranged from 130 nm to 170 nm. LSMCO's chemical composition was verified by EDS and XPS and it was demonstrated that Co2+ was successfully doped. The oxidation state of La was found to be +3, Mn is a mixture of Mn3+ and Mn4+ valence states, and Co is a mixture of Co3+ and Co2+ valence states using XPS. In the vicinity of Tc, all samples presented the second-order magnetic phase transition from ferromagnetic to paramagnetic resorting to normalization and the Banerjee criterion. The Tc dropped from 292 K to 237 K with increasing Co2+ doping. The blocking temperature and the saturation magnetization were suppressed by the Co2+ substitution while the maximum magnetic entropy change of the LSMCO ceramics was observed to reduce as Co2+ increased. When the external magnetic field is 5 T, the La0.8Sr0.2Mn0.95Co0.05O3 ceramics has a Tc of 292 K and a maximum magnetic entropy change value of 3.47 J/(kg K).

Effect of x-ray irradiation on magnetocaloric materials, (MnNiSi)1-x(Fe2Ge)x and LaFe13-x-yMnxSiyHz

Abstract Understanding the behavior of magnetocaloric materials when exposed to high-energy x-ray irradiation is pivotal for advancing magnetic cooling technologies under extreme environments. This study investigates the magnetic and structural changes of two well-studied magnetocaloric materials, (MnNiSi)1−x(Fe2Ge)x composition (x = 0.34) and LaFe13-x-yMnxSiyHz composition (x = 0.30,y = 0.1.26 and z = 1.53) alloys upon irradiation. The alloys were exposed to x-ray radiation with a dosage of a continuous sweeping rate of ∼>120 Gy min−1 and an absorbed dose of 35 kGy . Both the samples didn’t show any observable crystal change after irradiation. There was a considerable change in magnetization at low applied magnetic fields in magnetization versus temperature measurements from 2.72 emu g−1 to 4.01 emu g−1 in the irradiated (MnNiSi)1−x(Fe2Ge)x sample and 4.41 emu g−1 to 5.49 emu/g for the LaFe13-x-yMnxSiyHz alloys. The Magnetization versus magnetic field isotherms near transition temperature exhibited irradiation-induced magnetic hysteresis for the (MnNiSi)1−x(Fe2Ge)x (x = 0.34) while the LaFe13-x-yMnxSiyHz samples did not result in any irradiation-induced magnetic hysteresis. In both the samples the magnitude of entropy change did not change due to irradiation however, the peak entropy change shifted to different temperatures in both the samples, (MnNiSi)1−x(Fe2Ge)x (x = 0.34), showed a maximum entropy change, ΔSmag of ∼ 11.139 J/kgK at 317.5 K compared to ΔSmag of ∼ 11.349 J/kgK at Tave peak of 312.5 K for the irradiated sample. LaFe13-x-yMnxSiyHz, pristine sample exhibited a maximum magnetic entropy change, ΔSmag ∼ 18.663 J/kgK, with the corresponding peak temperature, Tave peak, of 295 K compared to ΔSmag ∼ 18.736 J/kgK, at Tave peak of 300 K. It was determined that irradiation applied to the samples did not induce any structural or magnetic phase changes in the selected compositions but rather modified the magnetic properties marginally.

Large magnetocaloric effect of RCoSn (R=Dy, Ho, Er and Tm) compounds

Materials with large magnetocaloric effect (MCE) at low temperatures under low field changes play an important role in the application of cryogenic magnetic refrigeration and attract extensive research interests of researchers. In this work, four ternary rare-earth-based RCoSn (R=Dy, Ho, Er and Tm) compounds were successfully synthesized and the crystal structure, magnetic properties, magnetic phase transition, and magnetocaloric effects were systematically studied. RCoSn (R=Dy, Ho, Er and Tm) compounds all crystallize in orthorhombic TiNiSi-type structure and undergo an antiferromagnetic (AFM) to paramagnetic (PM) transition with Neél temperature of 11.0, 7.9, 4.9 and 3.0 K, respectively. Large cryogenic MCE of RCoSn (R=Dy, Ho, Er and Tm) with the maximum magnetic entropy change (−ΔSMmax) of 10.6, 13.7, 17.1, 13.4 J/kg K for field change of 0–5 T was obtained. Furthermore, the value of −ΔSMmax for ErCoSn and TmCoSn is as high as 11.3 and 10.1 J/kg K for field change of 0–2 T, which is very competitive among low temperature magnetocaloric materials. The characteristic of second order magnetic phase transition indicates RCoSn (R=Dy, Ho, Er and Tm) compounds have good magnetic/thermal reversibility. These results show that RCoSn compounds, especially ErCoSn and TmCoSn, exhibit promising MCE and have great application potential in cryogenic magnetic refrigeration.

HoDyGdCoAl high-entropy amorphous alloys working at full temperature range for hydrogen liquefaction with large magnetocaloric effects

Cryogenic magnetic refrigeration materials based on magnetocaloric effect can be used for hydrogen liquefaction. In this work, glass formation ability (GFA), magnetocaloric effect (MCE), refrigeration performance of melt-extracted HoDyGdCoAl amorphous ribbons have been investigated. Amorphous ribbons undergo a second order magnetic phase transition which achieve a table-like behavior broaden the range of magnetic transition temperature in hydrogen liquefaction.The maximum magnetic entropy change (-ΔSmaxM), the δTFWHM and the refrigeration capacity (RC) achieved 10.9 J/ (kg K), 84.2 K and 742.4 J/ kg (x = 5) and 11.2 J/ (kg K), 69.8 K and 643.0 J/ kg (x = 20) under a magnetic field change of 7 T, respectively. Combining wide magnetic transition temperature and large refrigerant capacity, the present amorphous ribbons can be used as potential magnetic refrigerant materials in hydrogen liquefaction temperature region.