Abstract
Perovskite manganates (AMnO3) exhibit diverse structural, thermal, electrical, and magnetic properties. Their strong magnetocaloric effect (MCE) near the Curie temperature (TC) makes them ideal for magnetic-thermal anti-icing and deicing in power transmission lines. Below TC, ferromagnetic AMnO3 produces heat through multiple mechanisms, with the changing magnetic field induced by the strong AC current, causing heat through magnetic hysteresis and eddy currents, alongside the direct MCE. Above TC, no heating is generated, as MCE is unfavorable, thus preventing additional energy loss at elevated temperatures. In this work, La0.7Ca0.254Sr0.046MnO3 with TC close to 0 °C were synthesized by solid-state reaction. It is found that particle size >10 μm is beneficial for a large MCE, based on the results of particle size dependence of MCE. The resulting maximum magnetic entropy change at 277 K is 7.69 J·kg-1·K-1, and an adiabatic temperature change of 3.87 K at 277 K is achieved under 5 T. The prototype cable is fabricated using a well-established wire drawing process. A climate-simulation chamber is employed for the anti-icing and deicing experiments. The prototype cables demonstrated a strong capability for deicing and anti-icing. This simple and cost-effective prototype cable shows significant potential for mitigating the icing problem of overhead high-voltage power transmission lines.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
