Magic Angle Spinning NMR Research Articles

Comparison of methods for 14N-1H recoupling in 14N-1H HMQC MAS NMR

1H-detected 14N heteronuclear multiple-quantum coherence (HMQC) magic-angle-spinning (MAS) NMR experiments performed at fast magic-angle spinning (≥50 kHz) are finding increasing application, e.g., to pharmaceuticals. Of importance to the efficacy of these techniques is the recoupling technique applied to reintroduce the 1H-14N dipolar coupling. In this paper, we compare, by experiment and 2-spin density matrix simulations, two classes of recoupling scheme: first, those based on n = 2 rotary resonance, namely R3 and spin-polarisation inversion SPI-R3, and the symmetry based SR412 method and, second, the TRAPDOR method. Both classes require optimisation depending on the magnitude of the quadrupolar interaction, and thus there is a compromise choice for samples with more than one nitrogen site, as is the case for the studied dipeptide β-AspAla that contains two nitrogen sites with a small and large quadrupolar coupling constant. Considering this, we observe better sensitivity for the TRAPDOR method, though noting the marked sensitivity of TRAPDOR to the 14N transmitter offset, with both SPI-R3 and SR412 giving similar recoupling performance.

Tuning the reactivity of carbon surfaces with oxygen-containing functional groups

Oxygen-containing carbons are promising supports and metal-free catalysts for many reactions. However, distinguishing the role of various oxygen functional groups and quantifying and tuning each functionality is still difficult. Here we investigate the role of Brønsted acidic oxygen-containing functional groups by synthesizing a diverse library of materials. By combining acid-catalyzed elimination probe chemistry, comprehensive surface characterizations, 15N isotopically labeled acetonitrile adsorption coupled with magic-angle spinning nuclear magnetic resonance, machine learning, and density-functional theory calculations, we demonstrate that phenolic is the main acid site in gas-phase chemistries and unexpectedly carboxylic groups are much less acidic than phenolic groups in the graphitized mesoporous carbon due to electron density delocalization induced by the aromatic rings of graphitic carbon. The methodology can identify acidic sites in oxygenated carbon materials in solid acid catalyst-driven chemistry.

Great Offset Difference Internuclear Selective Transfer.

Carbon-carbon dipolar recoupling sequences are frequently used building blocks in routine magic-angle spinning NMR experiments. While broadband homonuclear first-order dipolar recoupling sequences mainly excite intra-residue correlations, selective methods can detect inter-residue transfers and long-range correlations. Here, we present the great offset difference internuclear selective transfer (GODIST) pulse sequence optimized for selective carbonyl or aliphatic recoupling at fast magic-angle spinning, here, 55 kHz. We observe a 3- to 5-fold increase in intensities compared with broadband RFDR recoupling for perdeuterated microcrystalline SH3 and for the membrane protein influenza A M2 in lipid bilayers. In 3D (H)COCO(N)H and (H)CO(CO)NH spectra, inter-residue carbonyl-carbonyl correlations up to about 5 Å are observed in uniformly 13C-labeled proteins.

Arsenic(III) oxide intercalate with ammonium chloride: crystal structure revision and thermal characterization.

According to the crystal structure determination by Edstrand & Blomqvist [Ark. Kemi (1955), 8, 245-256], intercalate NH4Cl·As2O3·0.5H2O ({\bf Y_{{NH}_{4}Cl}}) is not isostructural with compound KCl·As2O3·0.5H2O. This is very unlikely because both NH4Br·2As2O3 and KBr·2As2O3 as well as NH4I·2As2O3 and KI·2As2O3 are isostructural. Hence, intercalate {\bf Y_{{NH}_{4}Cl}} has been studied using single-crystal X-ray diffraction in addition to attenuated total reflection Fourier transform infrared (ATR-FTIR) and 15N solid-state magic-angle spinning nuclear magnetic resonance (ssNMR) spectroscopies. These techniques indicate that revising the previous crystal structure model is necessary. Compound {\bf Y_{{NH}_{4}Cl}} crystallizes in space group P6/mmm with unit-cell parameters a = 5.25420 (10) Å and c = 12.6308 (3) Å and is isostructural with KCl·As2O3·0.5H2O. The presence of two symmetry-independent ammonium cations in the structure has been unequivocally confirmed using 15N ssNMR spectroscopy. The 15N ssNMR spectrum of intercalate {\bf Y_{{NH}_{4}Cl}} has been compared with analogous spectra of NH4Br·2As2O3 and NH4I·2As2O3 which allowed for a probable assignment of signals to ammonium cations occupying particular sites in the crystal structures. Thermogravimetry, differential scanning calorimetry and variable-temperature ATR-FTIR spectra have revealed that intercalate {\bf Y_{{NH}_{4}Cl}} is dehydrated between 320 and 475 K. Upon cooling or standing in moist air water is re-absorbed. Dehydration leads to significant shortening of the c unit-cell parameter as revealed by powder X-ray diffraction [c = 12.1552 (7) Å at 293 K]. Compound {\bf Y_{{NH}_{4}Cl}} decomposes on prolonged heating above 490 K to arsenic(III) oxide and ammonium chloride.

Conformational ensembles explain NMR spectra of frozen intrinsically disordered proteins.

Protein regions which are intrinsically disordered, exist as an ensemble of rapidly interconverting structures. Cooling proteins to cryogenic temperatures for dynamic nuclear polarization (DNP) magic angle spinning (MAS) NMR studies suspends most of the motions, resulting in peaks that are broad but not featureless. To demonstrate that detailed conformational restraints can be retrieved from the peak shapes of frozen proteins alone, we developed and used a simulation framework to assign peak features to conformers in the ensemble. We validated our simulations by comparing them to spectra of α-synuclein acquired under different experimental conditions. Our assignments of peaks to discrete dihedral angle populations suggest that structural constraints are attainable under cryogenic conditions. The ability to infer ensemble populations from peak shapes has important implications for DNP MAS NMR studies of proteins with regions of disorder in living cells because chemical shifts are the most accessible measured parameter.

Structure of amorphous materials in the NASICON system NaTi2Si x PO12

The structure of glasses in the sodium (Na) super-ionic conductor (NASICON) system NaTi2Si x PO12 with x = 0.8 and x = 1.0 was explored by combining neutron and high-energy x-ray diffraction with 29Si, 31P and 23Na solid-state nuclear magnetic resonance (NMR) spectroscopy. The 29Si magic angle spinning (MAS) NMR spectra reveal that the silica component remains fully polymerized in the form of Si4 units, i.e. the silicon atoms are bound to four bridging oxygen atoms. The 31P{23Na} rotational echo adiabatic passage double resonance (REAPDOR) NMR data suggest that the 31P MAS NMR line shape originates from four-coordinated P n units, where n = 1, 2 or 3 is the number of bridging oxygen atoms per phosphorus atom. These sites differ in their 31P-23Na dipolar coupling strengths. The results support an intermediate range order scenario of a phosphosilicate mixed network-former glass in which the phosphate groups selectively attract the Na+ modifier ions. Titanium takes a sub-octahedral coordination environment with a mean Ti–O coordination number of 5.17(4) for x = 0.8 and 4.86(4) for x = 1.0. A mismatch between the P–O and Si–O bond lengths of 8% is likely to inhibit the incorporation of silicon into the phosphorus sites of the NASICON crystal structure.

Boron Adsorption Kinetics of Microcrystalline Cellulose and Polymer Resin

Tailoring boron-polysaccharide interactions is an important strategy for developing functional soft materials such as hydrogels, fire retardants, and sorbents for environmental remediation, for example, using lignocellulosic biomass. For such applications to be realized, it is paramount to understand the adsorption kinetics of borate anions on cellulose and their local structures. Here, the kinetic aspects of boron adsorption by microcrystalline cellulose, lignin, and polymeric resin are investigated and compared. Borate anions interact with the vicinal diols in the glucopyranoside moieties of cellulose to yield chemisorbed boron chelate complexes. In contrast to cellulose, technical lignin contains fewer cis-vicinal diols, and it does not have a tendency to form such chelate complexes upon treatment with the aqueous boric acid solution. The formation kinetics and stability of these chelate complexes strongly depend on nanoscale structures, as well as reaction conditions such as pH and concentration of the sorbate and sorbent. Specifically, insights into the distinct boron adsorption sites were obtained by solid-state one-dimensional (1D) 11B magic-angle spinning NMR and the local structures and intermolecular interactions in the vicinities of boron chelate complexes are elucidated by analyzing two-dimensional (2D) 1H-13C and 11B-1H heteronuclear correlation NMR spectra. The total boron adsorption capacity of cellulose is estimated to be in the 1.3-3.0 mg range per gram of sorbent, which is lower than the boron adsorption capacity of a polystyrene-based resin, ∼17.2 mg of boron per gram of Amberlite IRA 743. Our study demonstrates that the local backbone and side chain flexibility as well as the structures of polyol groups play a significant role in determining the kinetic and thermodynamic stability of chelate complexes, yielding to different boron adsorption capabilities of lignocellulosic polymers.

Design of β-Alanine-Derived Novel C18 Stationary Phase Containing Embedded Urea and Amide Groups for the Separation of Versatile Analytes.

Novel stationary phases have been emerging recently. A β-alanine-derived embedded urea and amide group-containing C18 phase (Sil-Ala-C18) was prepared for the first time. The media were packed into a 150 × 2.1 mm HPLC column, and the newly designed column was evaluated with the Tanaka and Neue test protocols in reversed-phase liquid chromatography (RPLC) separation mode. Moreover, it was characterized by the Tanaka test protocol in hydrophilic interaction chromatography (HILIC) separation mode. The new phase was characterized by elemental analysis, attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), and solid-state 13C cross-polarization magic angle spinning (CP/MAS) NMR spectroscopy at variable temperatures. The chromatographic evaluation involved very good separation of nonpolar shape-constrained isomers, polar and basic compounds in RPLC, and highly polar compounds in HILIC compared to the commercial reference columns. The Sil-Ala-C18 phase was able to separate the challenging β- and γ-isomers of tocopherol. The phase was also successfully applied for the separation of the isomers of tocopherol (vitamin E) and capsaicinoids from real samples of chili peppers (Capsicum spp.) in RPLC and ascorbic acid (vitamin C) in HILIC.

Cation and anion ordering in synthetic lepidolites and lithian muscovites: influence of the OH ∕ F and Li ∕ Al ratios on the mica formation studied by NMR (nuclear magnetic resonance) spectroscopy and X-ray diffraction

Abstract. A large number of lepidolites K(LixAl3−x)[Si2xAl4−2xO10](OH)yF2−y and Li-muscovites K(LixAl2-x/3□1-2x/3)[Si3AlO10](OH)yF2−y were synthesised by a gelling method in combination with hydrothermal syntheses at a pressure of 2 kbar and a temperature of 873 K. The nominal composition ranged between 0.0≤x≤2.0 and 0.0≤y≤2.0, i.e. from polylithionite K[Li2.0Al][Si4.0O10](OH)yF2−y over trilithionite K[Li1.5Al1.5][AlSi3.0O10](OH)yF2−y to muscovite K[Al2.0□][AlSi3.0O10](OH)yF2−y. 1H, 19F, 29Si and 27Al magic-angle spinning nuclear magnetic resonance (MAS NMR) and 27Al multiple-quantum magic-angle spinning (MQMAS) NMR spectroscopy has been performed to investigate the order and/or disorder state of Si and Al in the tetrahedral layers and of Li, Al, OH and F in the octahedral layer. The synthetic mica crystals are very small, ranging from 0.1 to 5 µm. With increasing Al content, the crystal sizes decrease. Rietveld structure analyses on 12 samples showed that nearly all samples consist of two mica polytypes (1M and 2M1) of varying proportions. In the case of lepidolites, the 1M / 2M1 ratio depends on the Li/Al ratio of the reaction mixture. The refinement of the occupancy factors of octahedral sites shows that lepidolites (1.5≤x≤2.0) represent a solid solution series with polylithionite and trilithionite as the endmembers. In the case of the Li-muscovites (0.0≤x≤1.5), the 1M / 2M1 ratio depends on the number of impurity phases like eucryptite or sanidine depleting the reaction mixture of Li or Al. There is no solid solution between trilithionite and muscovite; instead, the Li-muscovite crystals consist of domains differing in the relative proportions of muscovite and trilithionite. The overall composition of the synthesised micas which consist of two polytypes can be characterised by 29Si, 1H and 19F MAS NMR spectroscopy. The Si/Al ratio in the tetrahedral layers and thus the content of [4]Al were calculated by analysing the signal intensities of the 29Si MAS NMR experiments. The Li content xest was calculated from the measured tetrahedral Si/Al ratio of the 29Si MAS NMR signals. The calculated Li contents xest of samples between polylithionite and trilithionite agree with the expected values. The F-rich samples show slightly increased values and the OH samples lower values. Lepidolites with only F (x = 1.5 to 2.0, y = 0.0), but not lepidolites with only OH (x = 1.5 to 2.0 and y = 2.0), were observed after synthesis. With decreasing Li content, x≤1.2, Li-muscovites containing mostly hydroxyl (y>1.0) are formed. It was possible to synthesise fluorine containing micas with a Li content as low as 0.3 and y = 0.2 to 1.8. The 19F and 1H MAS NMR experiments reveal that F and OH are not distributed statistically but local structural preferences exist. F is attracted by Li-rich and OH by Al-rich environments. The quadrupolar coupling constant which represents the anisotropy of the Al coordination is low for polylithionite with CQ=1.5 MHz and increases to CQ=3.8 MHz for trilithionite. For tetrahedral Al a smaller increase of CQ from 1.7 to 2.8 MHz is observed. Advancing from trilithionite to muscovite both quadrupolar coupling constants decrease to 2.5 MHz for octahedral and 1.5 MHz for tetrahedral Al. In polylithionite there is the most isotropic environment for octahedral Al; there are only Li2Al sites coordinated by F in the octahedral sheets and O from the tetrahedral sheets which are regular, containing only Si. The distortion and anisotropy for Al in tetrahedral as well as octahedral sheets increases with rising Al content. The most anisotropic environment can be found in trilithionite, especially for octahedral Al.

Tricarbonyl-Pyrazine-Molybdenum(0) Metal-Organic Frameworks for the Storage and Delivery of Biologically Active Carbon Monoxide.

Metal-organic frameworks (MOFs) have high potential as nanoplatforms for the storage and delivery of therapeutic gasotransmitters or gas-releasing molecules. The aim of the present study was to open an investigation into the viability of tricarbonyl-pyrazine-molybdenum(0) MOFs as carbon monoxide-releasing materials (CORMAs). A previous investigation found that the reaction of Mo(CO)6 with excess pyrazine (pyz) in a sealed ampoule gave a mixture comprising a major triclinic phase with pyz-occupied hexagonal channels, formulated as fac-Mo(CO)3(pyz)3/2·1/2pyz (Mo-hex), and a minor dense cubic phase, formulated as fac-Mo(CO)3(pyz)3/2 (Mo-cub). In the present work, an open reflux method in toluene has been optimized for the large-scale synthesis of the pure Mo-cub phase. The crystalline solids Mo-hex and Mo-cub were characterized by powder X-ray diffraction (PXRD), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), FT-IR and FT-Raman spectroscopies, and 13C{1H} cross-polarization (CP) magic-angle spinning (MAS) NMR spectroscopy. The release of CO from the MOFs was studied by the deoxy-myoglobin (deoxy-Mb)/carbonmonoxy-myoglobin (MbCO) UV-vis assay. Mo-hex and Mo-cub release CO upon contact with a physiological buffer in the dark, delivering 0.35 and 0.22 equiv (based on Mo), respectively, after 24 h, with half-lives of 3-4 h. Both materials display high photostability such that the CO-releasing kinetics is not affected by irradiation of the materials with UV light. These materials are attractive as potential CORMAs due to the slow release of a high CO payload. In the solid-state and under open air, Mo-cub underwent almost complete decarbonylation over a period of 4 days, corresponding to a theoretical CO release of 10 mmol per gram of material.

Probing oxide-based glass structures by solid-state NMR: Opportunities and limitations

This Primer critically reviews the possibilities and limitations of probing the short-range structure of an oxide-based glass by routine magic-angle spinning (MAS) or triple-quantum MAS (3QMAS) nuclear magnetic resonance (NMR) experiments. We briefly outline the structural features of oxide-based glasses and the basics of solid-state NMR. Besides suggesting guidelines for selecting favorable experimental conditions and important considerations for recording high-quality MAS NMR spectra amenable for subsequent analysis, we review options for extracting NMR observables and their distributions from spins-1/2 as well as half-integer spin quadrupolar nuclei. Considering that the isotropic chemical shift remains the primary probe of local structure by MAS NMR, we thoroughly review its dependence on the short-range oxide-based glass parameters from the viewpoint of a very simple and intuitive but qualitative model. The utility of deconvolutions of notably 29Si and 31P MAS NMR spectra are discussed critically. We also suggest alternative yet qualitative analysis options that are available whenever MAS NMR spectral deconvolutions are not warranted without additional information, which incidentally applies to a majority of modern multicomponent glasses.

Solid-state NMR spectroscopy at ultrahigh resolution for structural and dynamical studies of MOFs

To characterize the structure and dynamics of metal–-organic frameworks (MOFs) in-depth at the molecular level, it is necessary to pursue high-resolution solid-state magic angle spinning (MAS) nuclear magnetic resonance (NMR) spectroscopy. Spectral resolution is usually affected by the quality of materials and various experimental conditions, of which magic angle (MA) accuracy is a crucial determinant. The current industrial criteria for MA calibration based on the common standard of KBr were found insufficient in guaranteeing optimal resolution MAS NMR for highly ordered MOFs. To drive towards higher-resolution MAS NMR spectroscopy, we propose a calibration protocol for more accurate MA with a higher-precision criterion based on 79Br MAS NMR of KBr, where the linewidth ratio of the fifth-order spinning sideband to the central band of KBr should be less than 1.00. As a result, ultrahigh-resolution 13C cross-polarization (CP) MAS NMR of MOF-5 is achieved with minimal linewidths as low as 4 Hz, and therefore MOF-5 can be used as a new standard convenient for verifying MA accuracy and also optimizing 13C CP conditions. Maintaining high-precision MA under variable temperature (VT) was found challenging on certain commercial MAS NMR probes, as was systematically investigated by VT NMR using KBr and MOF-5. Nevertheless, ultrahigh-resolution MAS NMR spectroscopy with stable MA under VT is employed to reveal fine structures and linker dynamics of a series of Zn-based MOFs with highly regulated structures. The ultrahigh-resolution NMR methodcan be generally applied to study a broad range of MOFs and other materials.

High-Porosity Metal-Organic Framework Glasses.

We report a synthetic strategy to link titanium-oxo (Ti-oxo) clusters into metal-organic framework (MOF) glasses with high porosity though the carboxylate linkage. A new series of MOF glasses was synthesized by evaporation of solution containing Ti-oxo clusters Ti16 O16 (OEt)32 , linkers, and m-cresol. The formation of carboxylate linkages between the Ti-oxo clusters and the carboxylate linkers was confirmed by Fourier-transform infrared (FT-IR) spectroscopy. The structural integrity of the Ti-oxo clusters within the glasses was evidenced by both X-ray absorption near edge structure (XANES) and 17 O magic-angle spinning (MAS) NMR. After ligand exchange and activation, the fumarate-linked MOF glass, termed Ti-Fum, showed a N2 Brunauer-Emmett-Teller (BET) surface areas of 923 m2 g-1 , nearly three times as high as the phenolate-linked MOF glass with the highest BET surface area prior to this report.

Discovering the Solid-State Secrets of Lorlatinib by NMR Crystallography: To Hydrogen Bond or not to Hydrogen Bond

Lorlatinib is an active pharmaceutical ingredient (API) used in the treatment of lung cancer. Here, an NMR crystallography analysis is presented whereby the single-crystal X-ray diffraction structure (CSD: 2205098) determination is complemented by multinuclear (1H, 13C, 14/15N, 19F) magic-angle spinning (MAS) solid-state NMR and gauge-including projector augmented wave (GIPAW) calculation of NMR chemical shifts. Lorlatinib crystallises in the P21 space group, with two distinct molecules in the asymmetric unit cell, Z′ = 2. Three of the four NH2 hydrogen atoms form intermolecular hydrogen bonds, N30-H…N15 between the two distinct molecules and N30-H…O2 between two equivalent molecules. This is reflected in one of the NH21H chemical shifts being significantly lower, 4.0 ppm compared to 7.0 ppm. Two-dimensional 1H–13C, 14N-1H and 1H (double-quantum, DQ)-1H (single-quantum, SQ) MAS NMR spectra are presented. The 1H resonances are assigned and specific HH proximities corresponding to the observed DQ peaks are identified. The resolution enhancement at a 1H Larmor frequency of 1 GHz as compared to 500 or 600 MHz is demonstrated.

Theoretical and 27Al NMR Spectroscopic Investigations of Binary Intermetallic Alkaline-Earth Aluminides.

The binary alkaline-earth aluminides AEAl2 (AE = Ca and Sr) and AEAl4 (AE = Ca-Ba) have been synthesized from the elements and investigated via powder X-ray diffraction experiments. CaAl2 adopts the cubic MgCu2-type structure (Fd3̅m), while SrAl2 crystallizes in the orthorhombic KHg2-type (Imma). LT-CaAl4 crystallizes with the monoclinic CaGa4-type (C2/m), while HT-CaAl4, SrAl4, and BaAl4 adopt the tetragonal BaAl4-type structure (I4/mmm). The close structural relation of the two CaAl4 polymorphs was established using a group-subgroup relation in the Bärnighausen formalism. In addition to the room-temperature and normal pressure phase of SrAl2, a high-pressure/high-temperature phase has been prepared using multianvil techniques, and its structural and spectroscopic parameters were determined. Elemental analysis by inductively coupled plasma mass spectrometry showed that no significant impurities with other elements besides the weighed ones are present and the chemical compositions match the synthesized ones. The title compounds have been furthermore investigated by 27Al solid-state magic angle spinning NMR experiments to validate the crystal structure and to gain information about the influence of the composition on the electron transfer and the NMR characteristics. This has also been investigated from a quantum chemical point of view using Bader charges, while the stabilities of the binary compounds in the three phase diagrams (Ca-Al, Sr-Al and Ba-Al) have been studied by calculations of formation energies per atom.

Windowed cross polarization at 55 kHz magic-angle spinning

Cross polarization (CP) transfers via Hartmann-Hahn matching conditions are one of the cornerstones of solid-state magic-angle spinning NMR experiments. Here we investigate a windowed sequence for cross polarization (wCP) at 55 kHz magic-angle spinning, placing one window (and one pulse) per rotor period on one or both rf channels. The wCP sequence is known to have additional matching conditions. We observe a striking similarity between wCP and CP transfer conditions when considering the flip angle of the pulse rather than the rf-field strength applied during the pulse. Using fictitious spin-1/2 formalism and average Hamiltonian theory, we derive an analytical approximation that matches these observed transfer conditions. We recorded data at spectrometers with different external magnetic fields up to 1200 MHz, for strong and weak heteronuclear dipolar couplings. These transfers, and even the selectivity of CP were again found to relate to flip angle (average nutation).

Pb2+ and Cr3+ immobilization efficiency and mechanism in red-mud-based geopolymer grouts

Herein, a green geopolymer composite was prepared using red mud and granulated blast furnace slag by immobilizing Pb2+ and Cr3+ to improve the utilization rate of red mud for heavy metal solidification and grouting engineering. The mechanical strength, leaching characteristics, and immobilization mechanisms of geopolymer grouts were investigated via Fourier transform infrared spectroscopy, X-ray diffraction, magic angle spinning–nuclear magnetic resonance spectroscopy, X-ray photoelectron spectroscopy, and scanning electron microscopy–energy-dispersive spectroscopy. Results demonstrate that the mechanical strength of the red-mud-based grout first increased and then decreased with an increasing alkali activator modulus. Moreover, red mud could participate in the geopolymerization reaction because of its aluminosilicate component. Furthermore, both Pb2+ and Cr3+ improved the mechanical strength of red-mud-based grouts at contents of 0.4 and 0.6 wt%, respectively. However, the mechanical strength drastically decreased when the dosages for both were 1.0 wt%. These chemical fractions of Pb2+ and Cr3+ evidence that the soluble and exchangeable fractions could be converted to a carbonate-bound fraction, iron–manganese oxide, and an organic fraction; however, the immobilization rates reached 91.46% and 95.86%, respectively. The characterization results confirm the participation of Pb2+ and Cr3+ in the geopolymerization, and Pb2+ and Cr3+ were immobilized by the chemical bonding and physical sealing effects.

Alkali activators with different cations turning volcanic ash into eco-friendly geopolymers

Geopolymers are green and sustainable cementitious materials that are a possible alternative to cement due to lower energy consumption and emissions. Volcanic ash can be used as raw material to prepare geopolymers by alkali activation owing to its high silica and alumina content. However, research on volcanic-ash-based geopolymers is still limited and no consensus on the optimal alkali activator and reaction mechanism has been obtained. This study investigates the effect of alkali activators with different cations on the mechanical properties and microstructure of volcanic-ash-based geopolymers. The flexural and compressive strengths were evaluated. X-ray diffractometry, Fourier transform infrared spectrometry, scanning electron microscopy coupled with energy-dispersive spectroscopy and silicon-29 (29Si) magic-angle spinning nuclear magnetic resonance were used to characterise the microstructural properties. The results showed that the alkali activation effect of sodium hydroxide (NaOH) on volcanic ash was superior to those of lithium hydroxide (LiOH) and potassium hydroxide (KOH), particularly at a concentration of 8 mol/l, with 28-day flexural and compressive strengths of 3.0 and 28.3 MPa, respectively. Microstructural results indicated that the sodium hydroxide-activated geopolymers formed dense, continuous, highly polymerised silica–aluminate gels. This paper provides a proper ratio scheme for activating the volcanic ash from similar deposits and promoting practical applications conducive to sustainable engineering development in the future.

Fluorine-Labeled N-Boc-l-proline as a Marker for Solid-State NMR Characterization of Biofunctionalizations on Paper Substrates

An efficient approach employing 4-dimethylaminopyridine and 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide hydrochloride as the coupling reagent is presented, which enables the functionalization of cotton linter paper substrates with the 19F spin label N-boc-cis-4-fluoro-l-proline. This spin label can be easily quantified by 19F magic angle spinning (MAS) NMR experiments to determine its loading on paper substrates. During the functionalization, the spin label stays intact, as confirmed by the 1H–19F heterocorrelation (1H → 19F CP MAS FSLG HETCOR) experiments. In combination with dynamic nuclear polarization (19F MAS DNP), the N-boc-cis-4-fluoro-l-proline spin label allows us to inspect 1 μmol/g and even lower molecule loadings on paper substrates, providing a highly sensitive local probe to analyze the structure of biofunctionalizations at the nanoscale on paper substrates in the future.

A mechanistic understanding of the effects of polyethylene terephthalate nanoplastics in the zebrafish (Danio rerio) embryo

Plastic pollution, especially by nanoplastics (NPs), has become an emerging topic due to the widespread existence and accumulation in the environment. The research on bioaccumulation and toxicity mechanism of NPs from polyethylene terephthalate (PET), which is widely used for packaging material, have been poorly investigated. Herein, we report the first use of high-resolution magic-angle spinning (HRMAS) NMR based metabolomics in combination with toxicity assay and behavioural end points to get systems-level understanding of toxicity mechanism of PET NPs in intact zebrafish embryos. PET NPs exhibited significant alterations on hatching and survival rate. Accumulation of PET NPs in larvae were observed in liver, intestine, and kidney, which coincide with localization of reactive oxygen species in these areas. HRMAS NMR data reveal that PET NPs cause: (1) significant alteration of metabolites related to targeting of the liver and pathways associated with detoxification and oxidative stress; (2) impairment of mitochondrial membrane integrity as reflected by elevated levels of polar head groups of phospholipids; (3) cellular bioenergetics as evidenced by changes in numerous metabolites associated with interrelated pathways of energy metabolism. Taken together, this work provides for the first time a comprehensive system level understanding of toxicity mechanism of PET NPs exposure in intact larvae.