Macromolecular Chain Transfer Agent Research Articles

One-Pot Preparation of Ratiometric Fluorescent Molecularly Imprinted Polymer Nanosensor for Sensitive and Selective Detection of 2,4-Dichlorophenoxyacetic Acid.

The development of fluorescent molecular imprinting sensors for direct, rapid, and sensitive detection of small organic molecules in aqueous systems has always presented a significant challenge in the field of detection. In this study, we successfully prepared a hydrophilic colloidal molecular imprinted polymer (MIP) with 2,4-dichlorophenoxyacetic acid (2,4-D) using a one-pot approach that incorporated polyglycerol methacrylate (PGMMA-TTC), a hydrophilic macromolecular chain transfer agent, to mediate reversible addition-fragmentation chain transfer precipitation polymerization (RAFTPP). To simplify the polymerization process while achieving ratiometric fluorescence detection, red fluorescent CdTe quantum dots (QDs) and green fluorescent nitrobenzodiazole (NBD) were introduced as fluorophores (with NBD serving as an enhancer to the template and QDs being inert). This strategy effectively eliminated background noise and significantly improved detection accuracy. Uniform-sized MIP microspheres with high surface hydrophilicity and incorporated ratiometric fluorescent labels were successfully synthesized. In aqueous systems, the hydrophilic ratio fluorescent MIP exhibited a linear response range from 0 to 25 μM for the template molecule 2,4-D with a detection limit of 0.13 μM. These results demonstrate that the ratiometric fluorescent MIP possesses excellent recognition characteristics and selectivity towards 2,4-D, thus, making it suitable for selective detection of trace amounts of pesticide 2,4-D in aqueous systems.

Harnessing Cytosine for Tunable Nanoparticle Self-Assembly Behavior Using Orthogonal Stimuli.

Nucleobases control the assembly of DNA, RNA, etc. due to hydrogen bond complementarity. By combining these unique molecules with state-of-the-art synthetic polymers, it is possible to form nanoparticles whose self-assembly behavior could be altered under orthogonal stimuli (pH and temperature). Herein, we report the synthesis of cytosine-containing nanoparticles via aqueous reversible addition-fragmentation chain transfer polymerization-induced self-assembly. A poly(N-acryloylmorpholine) macromolecular chain transfer agent (mCTA) was chain-extended with cytosine acrylamide, and a morphological phase diagram was constructed. By exploiting the ability of cytosine to form dimers via hydrogen bonding, the self-assembly behavior of cytosine-containing polymers was altered when performed under acidic conditions. Under these conditions, stable nanoparticles could be formed at longer polymer chain lengths. Furthermore, the resulting nanoparticles displayed different morphologies compared to those at pH 7. Additionally, particle stability post-assembly could be controlled by varying pH and temperature. Finally, small-angle X-ray scattering was performed to probe their dynamic behavior under thermal cycling.

One-pot Formulation of Cationic Oligochitosan Coated Nanoparticles via Photo- Polymerization Induced Self-Assembly.

During last few decades, oligochitosan (OCS)-coated nanoparticles have received great interest for nanomedicine, food and environment applications. However, their current formulation techniques are time-consuming with multi-synthesis/purification steps and sometimes require the use of organic solvents, crosslinkers and surfactants. Herein, we report a facile and rapid one-pot synthesis of OCS-based nanoparticles using photo-initiated reversible addition fragmentation chain transfer polymerization-induced self-assembly (Photo-RAFT PISA) under UV-irradiation at room temperature. To achieve this, OCS was first functionalized by a chain transfer agent (CTA) resulting in a macromolecular chain transfer agent (OCS-CTA), which will act as a reactive electrostatic/steric stabilizer. Owing to its UV-sensitivity, OCS-CTA was then used as photo-iniferter to initiate the polymerization of 2-hydroxypropyl methacrylate (HPMA) in aqueous acidic buffer, resulting in OCS-g-PHPMA amphiphilic grafted copolymers which self-assemble into nano-objects. Transmission electron microscopy and light scattering analysis reveal formation of spherical nanostructures.

Peculiar Behavior of Methyl Methacrylate Emulsion Polymerization-Induced Self-Assembly Mediated by RAFT Using Poly(Methacrylic Acid) Macromolecular Chain Transfer Agent.

Reversible addition-fragmentation chain transfer (RAFT) emulsion polymerization of methyl methacrylate (MMA) is successfully performed in water in the presence of a poly(methacrylic acid) (PMAA) macromolecular chain transfer agent (macroCTA) leading to the formation of self-stabilized PMAA-b-PMMA amphiphilic block copolymer particles. At pH3.7, the reactions are well-controlled with narrow molar mass distributions. Increasing the initial pH, particularly above 5.6, results in a partial loss of reactivity of the PMAA macroCTA. The effect of the degree of polymerization (DPn) of the PMMA block, the solids content, the nature of the hydrophobic segment, and the pH on the morphology of the obtained diblock copolymer particles is then investigated. Worm-like micelles are formed for a DPn of PMMA of 20 (PMMA20), while "onion-like" particles and spherical vesicles are obtained for PMMA30 and PMMA50, respectively. In contrast, spherical particles are obtained for the DPns higher than 150. This unusual evolution of particle morphologies upon increasing the DPn of the PMMA block seems to be related to hydrogen bonds between hydrophilic MAA and hydrophobic MMA units.

Versatile morphology transition of nano-assemblies via ultrasonics/microwave assisted aqueous polymerization-induced self-assembly based on host–guest interaction

Nano-assemblies have wide applications in biomedicine, functional coatings, Pickering emulsifiers, hydrogels, and so forth. The preparation of assemblies mainly utilizes the polymerization-induced self-assembly (PISA) method, which can produce high-concentration nanoscale assemblies in one step. However, the initiation processes of most reported PISA are limited to thermal initiation. Here, we reported two green and efficient methods for synthesizing nano-assemblies with various morphologies using ultrasound (20 kHz)/ microwave (500 W) assisted aqueous-phase RAFT-PISA in 3 h and 1 h. Cyclodextrin (CD) and styrene (St) nucleating monomer were complexed in a 1:1 ratio. Then, using Poly (ethylene glycol) methyl ether as the macromolecular reversible addition-fragmentation chain transfer (RAFT) agent (PEG-CTA) to control the CD/St complexes, the conversion rate of St monomer was respectively 27 %–60 %, 20 %–30 % within 3 h and 1 h under ultrasonics/microwave assisted PISA. Results showed that the morphologies of the assemblies are not only related to the length of PS block, but also to the assistance types and the remaining monomer concentration. The results showed that only PEG45-b-PS90 and PEG45-b-PS241 assemblies prepared by ultrasonics assisted PISA form evolved lamellaes and vesicles (100 nm), which break through the limitation of kinetic freezing. But the ultrasonic reaction on morphology of assemblies is not all favourable. For one thing, it can promote the movement of particles; for another, it makes reverse morphology transformation and sphere is preferred morphology. Therefore, the main reason of morphology evolution is the remaining monomer concentration of PEG45-b-PS90 and PEG45-b-PS241 assemblies reaches to 55 %–65 %, which promoting the segment movement. The results showed that the morphology of the assemblies prepared by microwave assisted PISA changed from spherical micelles to short rods, and finally to vesicles (120–140 nm) as the length of hydrophobic PS block increases. The kinetic freezing problem was solved in microwave-assisted PISA due to the action of microwaves and more remaining monomer concentration. Both them can boost particles movement.

Grafting Block Copolymer Nanoparticles to a Surface via Aqueous Photoinduced Polymerization-induced Self-Assembly at Room Temperature.

The creation of well-defined surface nanostructures is important for a diverse set of applications such as cell adhesion, superhydrophobic coating, and lithography. In this study, we describe a robust bottom-up method for surface functionalization that involves surface-initiated reversible deactivation radical polymerization (RDRP) and the grafting of block copolymer nanoparticles to material surfaces via aqueous photoinduced polymerization-induced self-assembly (photo-PISA) at room temperature. Using silica nanoparticles as a model substrate, colloidal mesoscale hybrid assemblies with various morphologies were successfully prepared. The morphologies can be easily tuned by changing the lengths of macromolecular chain transfer agents and parameters of the silica nanoparticles. The surface-initiated photo-PISA approach can also be employed for other large-scale substrates such as silicon wafer. Taking advantage of mild reaction conditions of this method (room temperature, aqueous medium, and visible light), enzymatic deoxygenation was introduced to develop oxygen-tolerant surface-initiated photo-PISA that can fabricate well-defined nanostructures on large-scale substrates under open-to-air conditions.

PH-Responsive Nanogels Generated by Polymerization-Induced Self-Assembly of a Succinate-Functional Monomer.

Colloidal nanogels formed from a pH-responsive poly(succinate)-functional core and a poly(sulfonate)-functional corona were prepared via a previously unreported reversible addition-fragmentation chain-transfer (RAFT)-mediated aqueous emulsion polymerization-induced self-assembly (PISA) route. Specifically, a poly(potassium 3-sulfopropyl methacrylate) (PKSPMA50) macromolecular chain-transfer agent (macro-CTA) was synthesized via RAFT solution polymerization followed by chain-extension with a hydrophobic, carboxylic acid-functional, 2-(methacryloyloxy) ethyl succinate (MES) monomer at pH 2. Colloidal nanoparticles with tunable diameters between 66 to 150 nm, depending on the core composition, and narrow particle size distributions were obtained at 20% w/w solids. Well-defined pH-responsive nanogels that swell on increasing the pH could be prepared even without the addition of a cross-linking comonomer, and introducing an additional cross-linker to the core led to smaller nanogels with lower swelling ratios. These nanogels could reversibly change in size on cycling the pH between acidic and basic conditions and remain colloidally stable over a wide pH range and at 70 °C.

Preparation of diblock copolymer nano-assemblies by ultrasonics assisted ethanol-phase polymerization-induced self-assembly

Assemblies are widely used in biomedicine, batteries, functional coatings, Pickering emulsifiers, hydrogels, and luminescent materials. Polymerization-induced self-assembly (PISA) is a method for efficiently preparing particles, mainly initiated thermally. However, thermally initiated PISA usually requires a significant amount of time and energy. Here, we demonstrate the preparation of nano-assemblies with controllable morphologies and size using ultrasound (20 kHz) assisted ethanol-phase RAFT-PISA in three hours. Using poly (N, N-dimethylaminoethyl methacrylate) as the macromolecular reversible addition-fragmentation chain transfer agent (PDMA-CTA) to control the nucleating monomer benzyl methacrylate (BzMA), we obtained nano-assemblies with different morphologies. With the length of hydrophobic PBzMA block growth, the morphologies of the assemblies at 15 wt% solid content changed from spheres to vesicles, and finally to lamellae; the morphologies of the assemblies at 30 wt% changed from spheres micelles to short worms, then vesicles, and finally to large compound vesicles. With the same targeted degree of polymerization, nano-assemblies having a 30 wt% solid content display a more evolved morphology. The input of ultrasonic energy makes the system have higher surface free energy, results the mass fraction interval of solventphilic blocks (fhydrophilic) corresponding to the formation of spherical micelles is expanded from fhydrophilic > 45 % to fhydrophilic > 31 % under ultrasound and the fhydrophilic required to form worms, vesicles, and large composite vesicles decreases in turn. It is worth noting that the fhydrophilic interval of worms prepared by ultrasonics assisted PISA gets larger. Overall, the highly green, externally-regulatable and fast method of ultrasonics assisted PISA can be extended to vastly different diblock copolymers, for a wide range of applications.

3D Printing Highly Efficient Ion‐Exchange Materials via a Polyelectrolyte Microphase Separation Strategy

Ion‐exchange materials are commonly composed of polyelectrolyte networks in which crosslinking preserves macroscopic geometry and prevents dissolution in aqueous conditions. However, crosslinking inherently inhibits efficient swelling and mass transfer during ion‐exchange processes. Herein, a one‐step polymerization‐induced microphase separation (PIMS) approach directly using water and linear polystyrene sulfonate macromolecular chain transfer agents (macroCTAs) is developed to engineer bicontinuous nanostructured materials with rapid ion‐exchange capabilities. These materials feature water‐swollen liquid‐like polyelectrolyte domain embedded in a rigid polymer network, where the domain spacing, as determined by small angle X‐ray scattering experiments, is precisely modulated between 15 and 89 nm based on the molecular weight of the macroCTA used. As the bicontinuous nanostructure enables rapid mass transfer throughout the material bulk, the 3D printed PIMS materials are able to rapidly remove model charged dyes from solution, exhibiting a mass transfer coefficient ≈35 times higher than commercially available counterparts. This work is the first example demonstrating direct self‐assembly of water into continuous nanochannels in a well‐controlled manner as supported by time‐resolved small‐angle neutron scattering experiments during polymerization. Moreover, these nanostructured materials are readily produced using commercially available 3D printers, enabling unparalleled high‐resolution fabrication of targeted complex structures, including accurately controllable macroporous geometries and surface areas.

Nanostructure design of 3D printed materials through macromolecular architecture.

Polymerization-induced microphase separation (PIMS) has been previously combined with 3D printing to develop customized nanostructured materials with a wide range of functional applications. In traditional PIMS, monofunctional, linear macromolecular chain transfer agents (macroCTAs) are used to develop macroCTA-b-P(monomer-stat-crosslinker) networks that self-assemble into unique disordered nanostructures. In this work, we designed a significantly altered network structure by utilizing linear macroCTAs with pendant CTA groups, which provides a novel network upon polymerization (i.e., branched copolymers, [macroCTA-graft-[P(monomer-stat-crosslinker)] n ]-b-P(monomer-stat-crosslinker)). Intriguingly, this method leads to the development of alternative disordered morphologies where the internal nanostructure can be precisely controlled. By systematically varying the number of pendant CTA groups, we demonstrate controlled transitions in macroCTA domain continuity, nanodomain size, and phase interface sharpness. These tunable properties translate to adjustable mechanical and swelling behaviors in the resulting 3D printed objects, ultimately enabling the fabrication of smart 4D materials (swelling-induced actuators and temperature-responsive shape-morphing objects). This research significantly expands the design toolbox for 3D printed PIMS materials, providing increased flexibility in the development of advanced materials with specific nanostructures and functionalities.

Hybrid Poly(β-amino ester) Triblock Copolymers Utilizing a RAFT Polymerization Grafting-From Methodology.

The biocompatibility, biodegradability, and responsiveness of poly(β-amino esters) (PBAEs) has led to their widespread use as biomaterials for drug and gene delivery. Nonetheless, the step-growth polymerization mechanism that yields PBAEs limits the scope for their structural optimization toward specific applications because of limited monomer choice and end-group modifications. Moreover, to date the post-synthetic functionalization of PBAEs has relied on grafting-to approaches, challenged by the need for efficient polymer-polymer coupling and potentially difficult post-conjugation purification. Here a novel grafting-from approach to grow reversible addition-fragmentation chain transfer (RAFT) polymers from a PBAE scaffold is described. This is achieved through PBAE conversion into a macromolecular chain transfer agent through a multistep capping procedure, followed by RAFT polymerization with a range of monomers to produce PBAE-RAFT hybrid triblock copolymers. Following successful synthesis, the potential biological applications of these ABA triblock copolymers are illustrated through assembly into polymeric micelles and encapsulation of a model hydrophobic drug, followed by successful nanoparticle (NP) uptake in breast cancer cells. The findings demonstrate this novel synthetic methodology can expand the scope of PBAEs as biomaterials.

Poly(ionic liquid) nanogel with tunable morphologies achieved via cross-linking polymerization induced self-assembly

Polymerization-induced self-assembly (PISA) has been the focus of extensive research as an effective approach to create polymer nanoobjects. However, it still confronts hurdles in terms of nano-object stability and the availability of hydrophilic macromolecular agents. In this study, an innovative and productive approach for developing poly(ionic liquid) (PIL) nano-objects was successfully established through cross-linking polymerization induced self-assembly (CPISA). The suggested approaches employ reversible addition fragmental transfer (RAFT) polymerization of ethylene glycol dimethacrylate (EGDMA) mediated by PIL macromolecular chain transfer agents (macro-CTAs) in selected solvents. Core-cross-linked PIL nanogels with various morphologies such as sphere, fiber, and ring were achieved by varying the molecular weight of PIL macro-CTAs and the solvent. Furthermore, PIL nanogels were demonstrated to be effective catalysts for the cycloaddition reaction between CO2 and epoxides. This versatile method allows for a controllable manner to produce cross-linked polymer nano-objects. Therefore, the findings have significant potential in the fields of polymer synthesis, nanomedicine and catalysis.

Polymerization Induced Microphase Separation of ABC Triblock Copolymers for 3D Printing Nanostructured Materials.

Polymerization-induced microphase separation (PIMS) is a versatile technique for producing nanostructured materials. In previous PIMS studies, the predominant approach involved employing homopolymers as macromolecular chain transfer agents (macroCTAs) to mediate the formation of nanostructured materials. In this article, the use of AB diblock copolymers as macroCTAs to design PIMS systems for 3D printing of nanostructured materials is investigated. Specifically, the influence of diblock copolymer composition and block sequence on the resulting nanostructures, and their subsequent impact on bulk properties is systematically investigated. Through careful manipulation of the A/B block ratios, the morphology and size of the nanodomains are successfully controlled. Remarkably, the sequence of A and B blocks significantly affects the microphase separation process, resulting in distinct morphologies. The effect can be attributed to changes in the interaction parameters (χAB, χBC, χAC) between the different block segments. Furthermore, the block sequence and composition exert profound influence on the thermomechanical, tensile, and swelling properties of 3D printed nanostructured materials. By leveraging this knowledge, it becomes possible to design advanced 3D printable materials with tailored properties, opening new avenues for material engineering.

RAFT emulsion polymerization of methyl methacrylate mediated by protonated poly(2‐(dimethylamino)ethyl methacrylate) macromolecular chain transfer agent: A mechanism study

AbstractSurfactant‐free reversible addition‐fragmentation transfer (RAFT)‐mediated emulsion polymerization has been used in the synthesis of latex particles. Although this method has been developed for some time, some detailed mechanisms are not clear. Herein, RAFT emulsion polymerization of methyl methacrylate (MMA) mediated by protonated poly(2‐(dimethylamino)ethyl methacrylate) (H+‐PDMAEMA) macromolecular chain transfer agent (macro‐CTA) is studied. The effects of the molar ratios of MMA/macro‐CTA and initiator/macro‐CTA, and the macro‐CTA chain length on the emulsion polymerizations are investigated. At the nucleation stage, H+‐PDMAEMA‐CTA is chain extended with MMA dissolved in aqueous phase; and when the length of PMMA block is above a critical length, the formed amphiphilic block copolymer (BCP) chains self‐assemble into micellar particles. The nucleation time in the emulsion polymerization is strongly dependent on the chain length of H+‐PDMAEMA‐CTA, and the molar ratio of free radical initiator/macro‐CTA. The emulsion polymerization rate is in direct proportion to the molar ratio of free radical initiator/macro‐CTA. The size and the size distribution of the latex particles can be tuned through control of the macro‐CTA chain length and MMA/macro‐CTA molar ratio. Monodispersed latex particles can be synthesized under proper conditions. It is expected that well‐defined latex particles with a variety of hydrophilic polymers (or biomacromolecules) on the surfaces can be synthesized by this approach.

Synthesis and Comparative Study of Polyether-b-polybutadiene-b-polyether Triblock Copolymers for Use as Polyurethanes.

In this paper, the effects of HTPBs with different main-chain microstructures on their triblock copolymers and polyurethane properties were investigated. Three polyether-modified HTPB triblock copolymers were successfully synthesized via a cationic ring-opening copolymerization reaction using three HTPBs with different microstructures prepared via three different polymerization methods as the macromolecular chain transfer agents and tetrahydrofuran (THF) and propylene oxide (PO) as the copolymerization monomers. Finally, the corresponding polyurethane elastomers were prepared using the three triblock copolymers as soft segments and toluene diisocyanate (TDI) as hard segments. The results of an analysis of the triblock copolymers showed that the triblock copolymers had lower viscosity and glass transition temperature (Tg) values as the HTPB 1,2 structure content decreased, although the effect on the thermal decomposition temperature was not significant. An analysis of the polyurethane elastomers revealed that as the content of the 1,2 structure in HTPB increased, its corresponding polyurethane elastomers showed a gradual increase in breaking strength and a gradual decrease in elongation at break. In addition, PU-1 had stronger crystallization properties compared to PU-2 and PU-3. However, the differences in the microstructures of the HTPBs did not seem to have much effect on the surface properties of the polyurethane elastomers.

Kinetic Studies and Temperature‐Induced Morphological Changes of Peptide Decorated Nano‐Objects via Polymerization‐Induced Self‐Assembly

AbstractIn the present work, combining polymerization‐induced self‐assembly (PISA) with self‐assembling peptides (SAPs) peptide−polymer hybrid nanostructures are prepared, harnessing the advantages of PISA and the self‐assembling driving force of SAPs. A tripeptide methacrylamide denoted as MAm‐GFF, where MAm, G, and F stand for methacrylamide, glycine, and phenylalanine, is copolymerized with glycerol monomethacrylate (GMA) by reversible addition−fragmentation chain transfer polymerization (RAFT) in dimethylformamide to produce a P(GMA62‐stat‐(MAm‐GFF)7) macromolecular chain transfer agent (macro‐CTA). This peptide‐containing macro‐CTA is then successfully chain‐extended with poly(2‐hydroxypropyl methacrylate) (PHPMA) by aqueous dispersion PISA, forming P(GMA62‐stat‐(MAm‐GFF)7)‐b‐PHPMA27 self‐assembled objects. The impacts of temperature and monomer conversion on the morphologies formed during the PISA process are investigated by analyzing samples withdrawn at different time during the polymerization of HPMA using transmission electron microscopy (TEM) and dynamic light scattering (DLS) at different temperatures (5–70 °C).

Continuous-Flow Laboratory SAXS for In Situ Determination of the Impact of Hydrophilic Block Length on Spherical Nano-Object Formation during Polymerization-Induced Self-Assembly.

In situ small-angle X-ray scattering (SAXS) is a powerful technique for characterizing block-copolymer nano-object formation during polymerization-induced self-assembly. To work effectively in situ, it requires high intensity X-rays which enable the short acquisition times required for real-time measurements. However, routine access to synchrotron X-ray sources is expensive and highly competitive. Flow reactors provide an opportunity to obtain temporal resolution by operating at a consistent flow rate. Here, we equip a flow-reactor with an X-ray transparent flow-cell at the outlet which facilitates the use of a low-flux laboratory SAXS instrument for in situ monitoring. The formation and morphological evolution of spherical block copolymer nano-objects was characterized during reversible addition fragmentation chain transfer polymerization of diacetone acrylamide in the presence of a series of poly(dimethylacrylamide) (PDMAm) macromolecular chain transfer agents with varying degrees of polymerization. SAXS analysis indicated that during the polymerization, highly solvated, loosely defined aggregates form after approximately 100 s, followed by expulsion of solvent to form well-defined spherical particles with PDAAm cores and PDMAm stabilizer chains, which then grow as the polymerization proceeds. Analysis also indicates that the aggregation number (Nagg) increases during the reaction, likely due to collisions between swollen, growing nanoparticles. In situ SAXS conducted on PISA syntheses using different PDMAm DPs indicated a varying conformation of the chains in the particle cores, from collapsed chains for PDMAm47 to extended chains for PDMAm143. At high conversion, the final Nagg decreased as a function of increasing PDMAm DP, indicating increased steric stabilization afforded by the longer chains which is reflected by a decrease in both core diameter (from SAXS) and hydrodynamic diameter (from DLS) for a constant core DP of 400.

Synthesis of bio‐based modified amphoteric acrylate epoxy emulsion surface sizing agent via RAFT polymerization

AbstractThe synthesis of bio‐based modified amphoteric epoxy modified acrylate sizing emulsion based on reversible addition fragmentation chain transfer (RAFT) polymerization and its application in paper sizing were studied. A macromolecular chain transfer agent for RAFT polymerization was synthesized by the esterification of epoxy resin E‐51 with RAFT agent to eliminate the active groups on RAFT agent. Amphoteric polymer emulsifiers with good emulsification and dispersion effects in acidic and alkaline media were successfully prepared by RAFT polymerization. After neutralization, other monomers were polymerized to access cationic sizing emulsion (acid neutralization) and anionic sizing emulsion (alkali neutralization). The effects of bio‐based monomer content, hydrophilic monomer dimethylaminoethyl methacrylate (DM) content and degree of quaternization on the properties of sizing emulsion and sizing paper were further explored. In addition to the particle size and polymer dispersion index (PDI) of latex particles in different experimental groups, the water resistance, folding resistance, bursting strength, tensile strength and surface roughness of sized paper were analyzed and evaluated. Based on these results, a better sizing emulsion formulation was established. It was confirmed that the addition of bio‐based monomers can improve the sizing performance of paper.

Role of the Polymer Microstructure in Controlling Colloidal and Thermo-Responsive Properties of Nano-Objects Prepared Via RAFT Polymerization in a Non-polar Medium.

After having demonstrated their potential in biomedical applications, thermo-responsive block copolymers that are able to self-assemble into nano-objects in response to temperature modifications are becoming more and more appealing in other sectors, such as the oil and gas and lubricant fields. Reversible addition-fragmentation chain transfer (RAFT) polymerization-induced self-assembly has been demonstrated as a valuable strategy for producing nano-objects from modular block copolymers in non-polar media, required for the mentioned applications. Although the influence of the nature and size of the thermo-responsive block of these copolymers on the properties of the nano-objects is extensively studied in the literature, the role of the solvophilic block is often neglected. In this work, we elucidate the role of the main microstructural parameters, including those of the solvophilic portion, of block copolymers produced by RAFT polymerization in the hydrocarbon blend decane/toluene 50:50 v/v on the thermo-responsive behavior and colloidal properties of the resulting nano-objects. Two long-aliphatic chain monomers were employed for the synthesis of four macromolecular chain transfer agents (macroCTAs), with increasing solvophilicity according to the number of units (n) or length of the alkyl side chain (q). Subsequently, the macroCTAs were chain-extended with different repeating units of di(ethylene glycol) methyl ether methacrylate (p), leading to copolymers that are able to self-assemble below a critical temperature. We show that this cloud point can be tuned by acting on n, p, and q. On the other hand, the colloidal stability, expressed in terms of area of the particle covered by each solvophilic segment, is only a function of n and q, which provides a way for controlling the size distribution of the nano-objects and to decouple it from the cloud point.

Temperature-Responsive Lactic Acid-Based Nanoparticles by RAFT-Mediated Polymerization-Induced Self-Assembly in Water.

This work demonstrates for the first-time biobased, temperature-responsive diblock copolymer nanoparticles synthesized by reversible addition-fragmentation chain-transfer (RAFT) aqueous emulsion polymerization-induced self-assembly (PISA). Here, monomers derived from green solvents of the lactic acid portfolio, N,N-dimethyl lactamide acrylate (DMLA) and ethyl lactate acrylate (ELA), were used. First, DMLA was polymerized by RAFT aqueous solution polymerization to produce a hydrophilic PDMLA macromolecular chain transfer agent (macro-CTA), which was chain extended with ELA in water to form amphiphilic PDMLA-b-PELA diblock copolymer nanoparticles by RAFT aqueous emulsion polymerization. PDMLAx homopolymers were synthesized targeting degrees of polymerization, DPx from 25 to 400, with relatively narrow molecular weight dispersities (Đ < 1.30). The PDMLA64-b-PELAy diblock copolymers (DPy = 10-400) achieved dispersities, Đ, between 1.18 and 1.54 with two distinct glass transition temperatures (Tg) identified by differential scanning calorimetry (DSC). Tg(1) (7.4 to 15.7 °C) representative of PELA and Tg(2) (69.1 to 79.7 °C) of PDMLA. Dynamic light scattering (DLS) studies gave particle z-average diameters between 11 and 74 nm (PDI = 0.04 to 0.20). Atomic force microscopy (AFM) showed evidence of spherical particles when dispersions were dried at ∼5 °C and film formation when dried at room temperature. Many of these polymers exhibited a reversible lower critical solution temperature (LCST) in water with a concomitant increase in z-average diameter for the PDMLA-b-PELA diblock copolymer nanoparticles.