Least Squares Support Vector Machine Research Articles

Determination of soluble solids content in loquat using near-infrared spectroscopy coupled with broad learning system and hybrid wavelength selection strategy

Soluble solids content (SSC) serves as a crucial metric in assessing loquat quality. To achieve fast, non-destructive, and accurate detection of SSC, the combination of near-infrared (NIR) spectroscopy and broad learning system (BLS) model was developed in this study. Meanwhile, the influence of six spectral preprocessing methods and six wavelength selection algorithms on SSC prediction was explored, and the performance of the BLS model was compared with the widely used partial least squares regression (PLSR) and least squares support vector machine (LS-SVM) models. The results showed that Savitzky-Golay smoothing combined with standard normal transformation (SG-SNV) offered the optimal pretreatment, and the hybrid method, namely interval variable iterative space shrinking analysis and successive projections algorithm (iVISSA-SPA), emerged as the most effective wavelength selection method. The BLS model outperformed both PLSR and LS-SVM models. Specifically, the BLS model based on the iVISSA-SPA method achieved the optimal SSC prediction results, with RP2 = 0.8646, RMSEP = 0.5104, and RPD = 2.7481. Therefore, NIR spectroscopy coupled with the BLS model and hybrid wavelength selection strategy could rapidly, non-destructively and accurately detect the SSC of loquat, providing a viable alternative for SSC prediction in fruit.

Novel optimized coupled rainfall model simulation based on stepwise decomposition technique.

Precipitation forecasting plays a pivotal role in guiding the effective management of regional water resources and providing crucial warnings for regional droughts and floods. Finding a monthly precipitation simulation model with robust fitting performance is a significant research endeavor in practical precipitation prediction. This paper introduces two modified African vulture optimization algorithms (MAVOA1 and MAVOA2). It provides hyperparameter optimization techniques for the least squares support vector machine (LSSVM), long short-term memory neural network (LSTM), and random forest (RF) models. These techniques are used to construct a monthly precipitation simulation model based on algorithmic optimization coupled with variational mode decomposition for full decomposition. The test results at five typical stations in the North China Plain reveal the following: (1) the LSSVM model demonstrates significantly better performance than the LSTM and RF models. (2) the MAVOA2-LSSVM model has the best-integrated effect: the average test fitting error is RMSE = 17.50 mm/month, MRE = 117.25%, NSE = 0.90, which shows its superiority in practical application and can significantly improve the accuracy of precipitation prediction; MAVOA2 is more suitable for machine learning models with more hyperparameters of its own, which provides a reference for hyperparameter optimization algorithms in the other fields.

Compressive strength detection of tunnel lining using hyperspectral images and machine learning

Traditional tunnel lining strength detection techniques are mostly contact-based, with relatively low detection efficiency. This study innovatively proposes hyperspectral imaging method to rapidly detect tunnel concrete lining strength from a machine vision perspective. Hyperspectral cameras were employed in indoor experiments to capture hyperspectral images of concrete specimens with different compressive strength levels. The differences of concrete strength based on hyperspectral reflectance characteristics were analysed using hyperspectral images and machine learning algorithms. Firstly, the K-Nearest Neighbors (KNN) classification algorithm was used to predict the classification of the concrete hyperspectral dataset with accuracy mostly exceeding 90 %. The results indicate distinctive differences in hyperspectral reflectance characteristics among concrete specimens. Furthermore, compressive strength prediction of different concrete specimens was carried out using Principal component regression (PCR), Partial least squares regression (PLSR), and Least Squares Support Vector Machine (LSSVM) machine learning models on both original and Savitzky-Golay(S-G) processed spectral data. LSSVM and PLSR models performed excellently in the visible light spectrums(400–1000 nm), with LSSVM excelling in the near-infrared spectrums(900–1700 nm). Finally, the feasibility of using Hyperspectral imaging(HSI) technology to detect tunnel lining strength was demonstrated at the shield tunnel model site. The predicted results were validated by combining with strength values measured by the rebound hammer, and presented promoising research path for automated non-destructive detection of concrete tunnel lining strength.

Machine learning models applied to altimetry era tide gauge and grid altimetry data for comparative long-term trend estimation: A study from Shikoku Island, Japan

Estimation of sea level trends is essential for understanding sea level rise dynamics. In this study, the performance of traditional Ordinary Least Squares (OLS) linear trend forecasting is compared with modern machine learning techniques, specifically Random Forests (RF) and Least Squares Support Vector Machines (LS-SVM).These methods are applied to 50 years of long-term tide gauge (TG) data from six tide gauge stations off the coast of Shikoku Island, Japan, and CMEMS Grid Altimetry data from 1993 to the present. The analysis uses OLS, RF, and LS-SVM to estimate trends from both data sets and compares the results. The objective is to determine the consistency and accuracy of RF and LS-SVM methods compared to the OLS method. The results indicate that machine learning algorithms (LS-SVM) effectively estimate sea level trends, offering potential improvements in precision for both long-term and medium-term analyses. Shikoku Island's coastal sea level trend is determined as 2.91±1.44 mm/yr using TG data and 3.00±1.52 mm/yr using CMEMS Grid Altimeter data with the OLS approach. Using the LS-SVM approach, the trend is found as 2.96±1.58 mm/yr with TG data and 3.02±1.60 mm/yr with CMEMS Grid Altimetry data. The novelty of this study lies in its thorough comparison of traditional and machine learning approaches for sea level trend estimation, providing valuable insights for future predictions of the sea level rise.

Rapid classification of rice according to storage duration via near-infrared spectroscopy and machine learning

Rice is the most important staple crop for more than half of the world's population. As rice quality can deteriorate during storage, methods that can effectively classify rice according to its storage duration are essential. However, existing methods of assessing rice storage time are time-consuming, laborious, and incompatible with modern industrial processing technologies. Therefore, we investigated the ability of near-infrared spectroscopy combined with machine learning algorithms to distinguish rice storage duration. A total of 482 rice samples were analyzed, which included 74, 100, and 308 samples produced during 2015–2016, 2017–2018, and 2020–2021, respectively. Five pre-processing methods were initially applied to the spectra to enhance the accuracy of the discrimination model. Subsequently, two-dimensional correlation spectroscopy and competitive adaptive reweighted sampling (CARS) were used to extract the characteristic spectra associated with storage time. Finally, three pattern recognition methods (K-nearest neighbor analysis, linear discriminant analysis, and least squares support vector machine (LS-SVM)) were compared for their effectiveness in constructing classification models. The results indicated that the best model for identifying the storage duration of rice was established after spectral pre-processing with the standard normal variate and first derivative, using the CARS algorithm to select feature wavelengths, and applying the LS-SVM modeling method, which together yielded correct identification rates of 99.72 % and 91.67 % for the calibration and validation sets, respectively. Thus, we propose near-infrared spectroscopy coupled with machine learning algorithms as an effective approach for classifying rice according to storage duration, which can facilitate evaluations of rice freshness in the market.

Data‐driven nonlinear state observation for controlled systems: A kernel method and its analysis

AbstractThis work proposes a data‐driven state observation algorithm for nonlinear dynamical systems, when the true state trajectory is not measurable and hence the states information needs to be reconstructed from input and output measurements. Such a reduction is formed by kernel canonical correlation analysis (KCCA), which (i) implicitly maps the available input–output data into a higher‐dimensional feature space, namely the reproducing kernel Hilbert space (RKHS); (ii) finds a projection of the past input–output data and a projection of the future input–output data with maximal correlation; and (iii) identifies the projected inputs and outputs, namely the canonical variates, as the observed states. We adopt a least squares support vector machine (LS‐SVM) formulation for KCCA, which imposes regularization on the vectors that specify the projections and is amenable to convex optimization. We prove theoretically that, based on the statistical consistency of KCCA, the observed states determined by the proposed state observer has a guaranteed correlativity with the actual states (when properly transformed). Furthermore, such observed states, when supplemented with the information of succeeding inputs, can be used to predict the succeeding outputs with guaranteed upper bound on the prediction error. Case studies are performed on two numerical examples and an exothermic continuously stirred tank reactor (CSTR).

A novel optimization rainfall coupling model based on stepwise decomposition technique

Traditional decomposition integration models decompose the original sequence into subsequences, which are then proportionally divided into training and testing periods for modeling. Decomposition may cause data aliasing, then the decomposed training period may contain part of the test period data. A more effective method of sample construction is sought in order to accurately validate the model prediction accuracy. Semi-stepwise decomposition (SSD), full stepwise decomposition (FSD), single model semi-stepwise decomposition (SMSSD), and single model full stepwise decomposition (SMFSD) techniques were used to create the samples. This study integrates Variational Mode Decomposition (VMD), African Vulture Optimization Algorithm (AVOA), and Least Squares Support Vector Machine (LSSVM) to construct a coupled rainfall prediction model. The influence of different VMD parameters α is examined, and the most suitable stepwise decomposition machine learning coupled model algorithm for various stations in the North China Plain is selected. The results reveal that SMFSD is relatively the most suitable tool for monthly precipitation forecasting in the North China Plain. Among the predictions for the five stations, the best overall performance is observed at Huairou Station (RMSE of 18.37 mm, NSE of 0.86, MRE of 107.2%) and Jingxian Station (RMSE of 24.74 mm, NSE of 0.86, MRE of 51.71%), while Hekou Station exhibits the poorest performance (RMSE of 25.11 mm, NSE of 0.75, MRE of 173.75%).

Inversion Study on Landslide Seepage Field Based on Swarm Intelligence Optimization Least-Square Support Vector Machine Algorithm

The permeability coefficient of landslide mass, a key parameter in the study of reservoir landslides, is commonly obtained through in situ and laboratory tests; however, the tests are costly and subject to high variability, leading to potential biases. In this paper, a new method was proposed to inversely estimate the permeability coefficient of landslide layers using monitoring data of groundwater level (GWL). First, the landslide transient seepage simulation was conducted to generate sample data for permeability coefficients and GWL during a reservoir operation cycle. Second, using GWL data as input and permeability coefficient data as output, the least-square support vector machine (LSSVM) was trained with two optimization algorithms, the particle swarm optimization (PSO) algorithm and the whale optimization algorithm (WOA), to construct the nonlinear mapping relationship between simulated GWL and permeability coefficients. Third, the accurate permeability coefficients for landslide seepage simulation were inverted or predicted based on the monitored GWL. Finally, using the inverted permeability coefficients for landslide seepage simulation, we compared simulation results with actual monitored GWL and achieved good consistency. In addition, this paper compared the inversion effects of three different algorithms: the standard LSSVM, PSO-LSSVM, and WOA-LSSVM. This study showed that these three algorithms had good nonlinear fitting effects in studying landslide seepage fields. Among them, using the inversion values from PSO-LSSVM for landslide seepage simulation resulted in the smallest relative error compared to actual monitoring data. Within a single reservoir operation cycle, the simulated water level changes were also largely consistent with the monitored water level changes. The results could provide a reference to determine landslide permeability coefficients and seepage.

Rapid and non‐destructive determination of total phenolic contents using UV–NIR spectroscopy of dehydrated mushroom (Lentinus edodes)

AbstractMultispectral imaging (MSI) is an emerging technique that ranges from light spectrum of UV–NIR (405–970 nm) used for rapid determination of phenolic contents. The current study focuses on the determination of total phenolic content (TPC) in a fast and non‐invasive way in hot‐air dehydrated Lentinus edodes. The spectral information of MSI has been combined with various chemometrics like partial least squares (PLS), back propagation neural networks (BPNN), and least squares‐support vector machines (LS‐SVM) for the quantitative prediction of phenolic contents. Fresh mushrooms possessed 1.49 and 1.73 GAE g kg−1 TPC in processed samples at 10% moisture content. Comparing models, PLS acquired significant Rp with a lower RMSEP of 0.9980 and 0.1039 and was considered an outstanding algorithm, followed by LS‐SVM of 0.9777 and 0.1417 coefficient of determination and error of prediction data set, respectively. It is concluded that MSI spectroscopy produces highly significant results to determine functional food properties in a rapid and non‐destructive way. The present study will provide a strong platform for the fast online determination of phenolic profile of agricultural commodities.Practical applicationsUtilization of spectroscopy for non‐destructive detection of phenolic contents is defined through the combination of chemometrics with spectra of multispectral imaging system and emphasizes control processing of postharvest horticulture produces. Prediction results R2 above 80% describe that these chemometrics are successfully capable of estimating total phenolic contents in control processing for quality preservation.

Development and validation of colorimetric-assisted chemometrics methods based on the localized gold nanoparticles surface plasmon resonance for fast simultaneous estimation of anti-hepatitis C virus drugs in their combined dosage form: A comparative study with HPLC method

The present work describes a developed analytical method based on a colorimetric assay using gold nanoparticles (AuNPs) along with chemometric techniques for the simultaneous estimation of sofosbuvir (SOF) and ledipasvir (LED) in their synthetic mixtures and tablet dosage form. The applied chemometric approaches were continuous wavelet transform (CWT) and least squares support vector machine (LS-SVM). Characterization of AuNPs and AuNPs in combination with the drug was performed by UV–vis spectrophotometer, transmission electron microscopy (TEM), dynamic light scattering (DLS), and Fourier transform infrared (FTIR) spectroscopy. In the CWT method, the zero amplitudes were determined at 427 nm with Daubechies wavelet family for SOF (zero crossing point of LED) and 440 nm with Symlet wavelet family for LED (zero crossing point of SOF) over the concentration range of 7.5–90.0 μg/L and 40.0–100.0 μg/L with coefficients of determination (R2) of 0.9974 and 0.9907 for SOF and LED, respectively. The limit of detection (LOD) and limit of quantification (LOQ) of this method were found to be 7.92, 9.96 μg/L and 12.02, 30.2 μg/L for SOF and LED, respectively. In the LS-SVM model, the mean percentage recovery of SOF and LED in synthetic mixtures was 98.29 % and 99.25 % with root mean square error of 2.392 and 1.034, which were obtained by the optimization of regularization parameter (γ) and width of the function (σ) based on the cross-validation method. The proposed methods were also applied for the determination concentration of SOF and LED in the combined dosage form, recoveries were higher than 95 %, and relative standard deviation (RSD) values were lower than 0.4 %. The achieved results were statistically compared with those obtained from the high-performance liquid chromatography (HPLC) technique for the concurrent estimation of components through one-way analysis of variance (ANOVA), and no significant difference was found between the suggested approaches and the reference one. According to these results, simplicity, high speed, lack of time-consuming process, and cost savings are considerable benefits of colorimetry along with chemometrics methods compared to other ways.

Measurement of CO2 leakage from pipelines under CCS conditions through acoustic emission detection and data driven modeling

CO2 leakage from carbon capture and storage (CCS) networks may lead to ecological hazards, bodily injury and economic losses. In addition, captured CO2 often contains impurities which affect the leakage behavior of CO2. This paper presents a method for continuous and quantitative measurements of CO2 leakage flowrate and the volume fraction of impurities by combining data-driven models with acoustic emission (AE) and temperature sensors. Three data-driven models based on artificial neural network (ANN), random forest (RF), and least squares support vector machine (LS-SVM) algorithms are established. The outputs from the three data-driven models are then integrated to give improved results. Experimental work was conducted on a purpose-built CO2 leakage test rig under a range of conditions. N2 was injected to the CO2 gas stream as an impurity medium. Results show that the integrated model yields a relative error within ±4.0 % for leakage flowrate and ±3.4 % for volume fraction of N2.

Pipeline Leak Detection: A Comprehensive Deep Learning Model Using CWT Image Analysis and an Optimized DBN-GA-LSSVM Framework.

Detecting pipeline leaks is an essential factor in maintaining the integrity of fluid transport systems. This paper introduces an advanced deep learning framework that uses continuous wavelet transform (CWT) images for precise detection of such leaks. Transforming acoustic signals from pipelines under various conditions into CWT scalograms, followed by signal processing by non-local means and adaptive histogram equalization, results in new enhanced leak-induced scalograms (ELIS) that capture detailed energy fluctuations across time-frequency scales. The fundamental approach takes advantage of a deep belief network (DBN) fine-tuned with a genetic algorithm (GA) and unified with a least squares support vector machine (LSSVM) to improve feature extraction and classification accuracy. The DBN-GA framework precisely extracts informative features, while the LSSVM classifier precisely distinguishes between leaky and non-leak conditions. By concentrating solely on the advanced capabilities of ELIS processed through an optimized DBN-GA-LSSVM model, this research achieves high detection accuracy and reliability, making a significant contribution to pipeline monitoring and maintenance. This innovative approach to capturing complex signal patterns can be applied to real-time leak detection and critical infrastructure safety in several industrial applications.

Feature extraction method for ultrasonic pipeline defects based on fractional-order VMD

ABSTRACT Ensuring the safety of pipeline transportation is vital for societal well-being. Traditional methods for identifying defects in steel pipelines through ultrasonic echo signal pattern recognition often fail to extract comprehensive and effective features crucial for accurate defect detection. This study introduces an innovative feature extraction method employing a fractional Fourier transform variational modal decomposition (FRFT-VMD), hereafter referred to as the fractional-order VMD algorithm. This method utilises the fourth-order central moment and envelope entropy to optimise several key parameters: the fractional order in the Fourier transform, the number of decomposition layers, and the penalty factor in variational modal decomposition. To evaluate the effectiveness of the proposed method, ultrasonic echo signals from both finite element simulations and experimental platforms were analysed using the FRFT-VMD technique. The features extracted were then classified using a Least Squares Support Vector Machine (LSSVM) to determine defect depths. The results show a recognition accuracy of 95.2% in simulated signals and 89.1% in experimentally measured signals across various defect depths, indicating a significant improvement over existing feature extraction methodologies. The fractional-order VMD algorithm proves to be superior in extracting features that enhance the accuracy of defect identification in steel pipelines.

Prediction of antioxidant enzyme activity in tomato leaves based on microhyperspectral imaging technique

Antioxidant enzymes play an important role in defending of tomato leaves against damage under different types of adversity stresses. In this paper, hyperspectral imaging (HSI) technology was used to predict the peroxidase (POD), catalase (CAT) and superoxide dismutase (SOD) activities in tomato leaves. Spectra was preprocessed using Baseline, Smoothing and Normalize methods. Characteristic wavelengths were selected using competitive adaptive reweighted sampling (CARS), interval random frog (IRF) and genetic algorithm-combined partial least squares (GAPLS). Macroscopic prediction models for antioxidant enzyme activity were developed using partial least squares regression (PLSR), principal components regression (PCR) and least square support vector machines (LSSVM) algorithms. To establish microscopic prediction models for microzone cell image and spectral detection, the antioxidant enzyme activity in the observed leaf area was migrated to the microzone using the macroscopic prediction model and the ratio of microzone area to sliced leaf area. As results of model evaluation, the correlation coefficients of calibration (Rc) and prediction (Rp) were 0.853 and 0.832 for POD activity, 0.790 and 0.715 for CAT activity, and 0.975 and 0.937 for SOD activity, respectively. The results indicated the possibility of transfer learning between macroscopic and microscopic models in quantitatively predicting antioxidant enzymes in tomato leaves by HSI. The findings in this study provided a reference data in quantitatively detection of trace substances in tomato leaves and suggested macroscopic to microscopic modelling approaches for the future HSI applications.

Rapid fluorescence detection of black tea fermentation degree based on cobalt ion mediated carbon quantum dots

Fermentation is key to the quality of black tea, and traditional sensory evaluation methods are too slow and subjective for reliable, large-scale evaluation during fermentation. To address this problem, this study formulated a sensing system based on cobalt ions-doped carbon quantum dots emitting bright blue fluorescence. In evaluation experiments, this system was found to work stably for 90 min and accurately determine fermentation quality in real time. In fluorescence spectra results, fluorescence intensity decreased sharply with the concentrations of catechins, theaflavins, and gallic acid and this relationship was highly linear at concentrations from 0.01 to 50 μg/mL; R2 was >97% and the limit of detection was <0.046 μg/mL. A least-squares support vector machine model was established, and it had a 100% accuracy rate in discriminating between degrees of fermentation. Therefore, this quantum-dot-based system serves as an accurate and efficient means of measuring the fermentation quality of black tea.

Dynamic internal resistance modeling and thermal characteristics of lithium-ion batteries for electric vehicles by considering state of health

Attempting to solve the problem of inconsistent dynamic thermal characteristics caused by transient changes in internal resistance of lithium-ion batteries (LIBs) for electric vehicles (EVs) under service conditions, taking a 9.4Ah prismatic LIB as the study object, the internal resistance data under different state of health (SOH), state of charge (SOC), temperature (T), charge/discharge rates of LIB are obtained through the mixed-rate hybrid pulse power characterization (MR-HPPC) test. Based on this, a dynamic internal resistance model (DIRM) considering the SOH is proposed by the prediction of the least squares support vector machines (LS-SVM) model. In this study, a thermoelectric coupling model and a resistance-thermal co-simulation of the LIB are established based on DIRM, and the temperature rise characteristics under constant rates and dynamic operating conditions are investigated at different SOH states. The maximum DIRM error (DIRME) between DIRM-based simulated maximum transient temperature (Tmax-tra) and test Tmax-tra is 0.88 °C at constant charge/discharge rate operating conditions, while the maximum DIRME between DIRM-based simulated Tmax-tra and test Tmax-tra is 0.21 °C under dynamic operating conditions. The results can provide a theoretical support for improving the modeling precision of the heat generation of LIBs with different aging levels for accurate thermal management design.

Potential of hyperspectral imaging for nondestructive determination of α-farnesene and conjugated trienol content in ‘Yali’ pear

The sesquiterpene α-farnesene and its corresponding oxidation products, namely conjugated trienols (CTols) is well known to be correlated with the development of superficial scald, a typical physiological disorder after a long term of cold storage in pear fruit. In this work, hyperspectral imaging (HSI) technology was used for nondestructive predicting of α-farnesene and CTols [CT258, CT281 and CT(281-290)] content in ‘Yali’ pear. In order to obtain the best performance of calibration model and simplify the calibration model further, various preprocessing methods together with their combinations and different wavelength selection algorithms, including successive projections algorithm (SPA), competitive adaptive reweighted sampling (CARS) and uninformative variable elimination (UVE), were investigated and compared based on linear partial least square regression (PLSR) and nonlinear least square support vector machine (LS-SVM) models, respectively. In conclusion, compared to the PLSR models, the results of LS-SVM models based on original and preprocessing methods performed better for the prediction of α-farnesene and CTols, while the performance of LS-SVM models based on the selected characteristic wavelengths were worse. For α-farnesene, the best result was obtained by LS-SVM model based on MSC-FD pretreatment with the RPD value of 2.6, Rp = 0.925 and RMSEP = 4.387 nmol cm−2. And for CTols, CT281 performed better compared with CT258 and CT(281-290), achieving the result with RPD = 2.4, Rp = 0.913 and RMSEP = 2.734 nmol cm−2 based on LS-SVM model combined with SD pretreatment. The overall results illustrated HSI technology could be used for rapid and nondestructive prediction of α-farnesene and CTols in ‘Yali’ pear, which would be helpful for supporting postharvest decision systems.

Optimization of PV module ash accumulation prediction based on an improved vulture algorithm

Abstract In this research, an ash accumulation prediction model based on the Improved Bald Eagle Algorithm (IBES) optimization is proposed, and a least-squares support vector machine (LSSVM) is used to investigate the correlation between climatic parameters and the quantity of ash deposition on PV panel surfaces. Ash deposit affects PV panel output power over time and is influenced by meteorological factors. Following a thorough selection procedure, meteorological variables like wind speed and rainfall are used in the model to forecast the amount of ash that will accumulate on the slab. The original condor method was prone to local optimum convergence and had a slow convergence rate. These weaknesses are addressed by the optimal selection of the next iteration, which introduces the Cauchy variation operator to mutate the population’s optimal individuals. The optimization parameters of the revised algorithm are incorporated into the model and results are compared to models of other optimization algorithms. The outcomes demonstrate that the IBES-LSSVM ash accumulation prediction model has a higher degree of fit and a reduced prediction error.

Rapid monitoring of the spatial distribution of soil organic matter using unmanned aerial vehicle imaging spectroscopy

ABSTRACT An existing technique for quickly obtaining the spatial distribution data of soil organic matter (SOM) involves combining an unmanned aerial vehicle (UAV) platform and imaging spectroscopy technology; this technique is suitable for precision agricultural management and real-time monitoring. In this study, the average spectral data were first extracted via circular regions of interest (ROIs) of different radii and modelled using the measured SOM to determine the optimal extraction range for the spectral data. Partial least-squares regression (PLSR) and support vector machine (SVM) models were constructed based on the raw spectra, standard normal transform spectra, multiple scattering-corrected spectra, and first-order differential spectra. The difference index, ratio index, and normalized index were calculated and analysed for their correlation with SOM content, and the spectral indices were screened to establish the SOM prediction model. Finally, the accuracy of the model was evaluated, and we selected the optimal model to map the spatial distribution of SOM. The results of our study show that 1) the radius of the ROI significantly affects the model’s accuracy; 2) the accuracy of the nonlinear SVM model is much higher than that of the linear PLSR model; 3) the prediction model based on spectral indices is better than full-band model. This study can serve as a model for the application of UAV imaging spectroscopy technology to field-scale SOM estimations and rapid monitoring, as well as provide technical support for precision agriculture and climate change studies.

A Realistic Method for Diagnosing Bearing Faults of Three-Phase Induction Motor using Advanced Support Vector Machine Algorithm

Bearings are one of the most crucial components of any induction motor. The faults or failure of bearings can lead to high maintenance and operational costs. To ensure the induction motor operates consistently, it is crucial to identify and diagnose bearing faults at an early stage. In this perspective, this manuscript presents a method based on least square support vector machine (LSSVM) to identify the bearing defects of an induction motor. The IM parameters, such as stator currents, input voltage, and rotor speed, were extracted using experimental setup at different loads and health conditions of bearing. Then these parameters were used to train and validate the LSSVM algorithm in MATLAB to diagnose the bearing defects. The proposed method provides 97.14% fault prediction accuracy with an RBF kernel.