Stable Laser Research Articles

Low phase noise cavity transmission self-injection locked diode laser system for atomic physics experiments

Lasers with high spectral purity are indispensable for optical clocks and for the coherent manipulation of atomic and molecular qubits in applications such as quantum computing and quantum simulation. While the stabilization of such lasers to a reference can provide a narrow linewidth, the widely used diode lasers exhibit fast phase noise that prevents high-fidelity qubit manipulation. In this paper, we demonstrate a self-injection locked diode laser system that utilizes a high-finesse cavity. This cavity not only provides a stable resonance frequency, it also acts as a low-pass filter for phase noise beyond the cavity linewidth of around 100 kHz, resulting in low phase noise from dc to the injection lock limit. We model the expected laser performance and benchmark it using a single trapped 40Ca+-ion as a spectrum analyzer. We show that the fast phase noise of the laser at relevant Fourier frequencies of 100 kHz to >2 MHz is suppressed to a noise floor of between −110 dBc/Hz and −120 dBc/Hz, an improvement of 20 to 30 dB over state-of-the-art Pound-Drever-Hall-stabilized extended-cavity diode lasers. This strong suppression avoids incoherent (spurious) spin flips during manipulation of optical qubits and improves laser-driven gates when using diode lasers in applications involving quantum logic spectroscopy, quantum simulation, and quantum computation.

Enhancing thermal stability of Nd:GGG WGM microdisk lasers via silica integration

Abstract Whispering gallery mode (WGM) resonators, as an integral component of integrated photonics, have attracted considerable attention due to their high Q factor, small footprint, and small mode volume, making them widely applied as microlasers. In this work, Nd:GGG crystal was prepared into a Nd:GGG film with thickness of 1.8 μm through ion implantation-enhanced etching (IIEE) technique, and subsequently, the Nd:GGG film was partened by focused ion beam (FIB) technology to generate a microdisk with diameter of 20 μm. For high-power microcavity lasers, heat generation during laser operation was inevitable. We placed the microdisk on a silica holder and a silica wafer, respectively. The microdisk placed on the silica holder and silica wafer exhibited laser thresholds of 32 μW and 17 μW, respectively. Moreover, due to different heat dissipation conditions, the microdisk placed on the silica holder exhibited a mode shift of 0.13 nm/mW, while the microdisk placed on the silica wafer showed a more stable laser output state with a mode shift of 0.02626 nm/mW.

Yb-doped mode-locked fiber laser with a hybrid structure of NPR and a Lyot filter as the saturable absorber.

Passively mode-locked fiber lasers based on a nonlinear polarization rotation (NPR) have attracted much attention due to their ability to generate short pulses with wide spectra and high peak power. However, environmental perturbations can easily cause the lasers to lose the mode-locked state and make it a challenge for practical application. The aim of this research is to improve the laser stability by inserting a Lyot filter into the mode-locked laser cavity. The experimental results indicate that the mode-locked state can be maintained when the radius of the fiber loop is changed from 7.5 to 1.5 cm, while the signal-to-noise ratio of the fundamental frequency remains almost the same. The tunability of the output power can be achieved by adding a half-wave plate (HWP) in the laser cavity without changing the pump power, while the mode-locked state remains stable. By adjusting the angle of the HWP2, the output power can be adjusted from 3.36 to 66.5 mW at repetition rate of 29.7 MHz.

A versatile setup for nanosecond laser polishing processes with in situ analysis capabilities.

Laser polishing of material surfaces is a complex process depending on many variable parameters, such as, e.g., the properties of the used laser and optics (wavelength, pulse duration, fluence, and profile), as well as the processing (spot size, feed rate, and line or point overlap), and the thermodynamical properties of the material to be polished (heat capacity, heat conduction, etc.). For the successful laser polishing of any material, a systematic variation of all the process parameters is required to obtain satisfactorily polished surfaces with an appropriate set of parameters for the material of interest. In order to allow systematic studies of laser polishing processes, a new setup employing a highly stable nanosecond laser with an adjustable wavelength has been realized. The sample is located in a small high-vacuum chamber with the capability of introducing additional gases in a controlled manner, and the entire chamber is scanned in the beam to allow laser polishing of selected spots, lines, or larger areas. The setup is fully remote-controlled and allows in situ inspection of the initiated processes by means of a long-range microscope, electrical measurements, reflected laser light from the sample surface, and an analysis of the vacuum within the process chamber. The main properties of the setup will be presented, and some exemplary results on niobium and molybdenum metal samples will be discussed.

Wavelength tunable ring cavity erbium-doped fibre laser based on tapered Fabry Perot filter fabricated by hydrofluoric acid corrosion for stretch sensing

In this study, the erbium-doped fiber laser with a ring cavity and a Fabry-Perot (F-P) filter was proposed and experimentally verified. In the design of the laser, hydrofluoric acid was employed for chemical etching to prepare the F-P cavity, and tapering was applied to the F-P cavity to enhance sensitivity. The experimentally prepared F-P filter was placed in the resonant cavity and served as a frequency-selective device for the fiber laser. At a laser threshold of 48 mW, we obtained a single-wavelength laser output at 1565.28 nm, with a 3 dB linewidth of 0.29 nm. To evaluate the stretching sensing performance of the EDFL system, we performed stretching of the F-P filter. The experimental results demonstrated that within a stretching length range of 0 to 3 mm, we could obtain a single-wavelength laser that could be tuned from 1559.57 to 1567.04 nm, corresponding to a tuning range of 7.47 nm. The laser showed a sensitivity of 2.73 nm/mm and a goodness of fit 0.999. Monitoring the stability of a single-wavelength laser within 30 min, the signal-to-noise ratio was greater than 27.212 dB, and the power fluctuation was less than 0.712 dB. Additionally, the polarization controller was adjusted to obtain two different dual-wavelength lasers with a power fluctuation of less than 0.71 dB.

Environmentally stable all‐fiber femtosecond laser for industrial application based on a SESAM mode‐locked ytterbium‐doped laser

AbstractWe demonstrate an environmentally stable femtosecond laser for industrial application based on all polarization‐maintaining Yb‐doped laser and experimentally explore the effect of the net cavity dispersion (NCD) on output characteristics. The oscillator emits pulses with 5.1 ps and a 23 nm spectral bandwidth, then the pulse is compressed to 88 fs. The instabilities over 120 h gives 0.32% relative root mean square noise, indicating high stability of the pulse laser. With effective regulation of NCD, we obtained the maximum spectral bandwidth of 27 nm. Such broadband oscillator with compact all‐fiber configurations provide extremely high stability should be very attractive for long‐term industrial application.

A highly stable and efficient organic microcavity polariton laser

With their remarkably low thresholds, organic polariton lasers are a promising alternative to organic photonic lasers. However, device stability remains a challenge, in part due to material degradation during deposition of the top dielectric mirror. We demonstrate polariton lasers based on 4,4′-Bis(4-(9H-carbazol-9-yl)styryl)biphenyl (BSBCz) as active material that achieve a low lasing threshold of 8.7 μJ/cm2, and we show that a ZrO2 protection layer between active layer and top mirror significantly improves stability. Optimized devices exhibit minimal degradation after 100,000 excitation pulses at 3.8 times above threshold. Our findings establish BSBCz as an attractive candidate for future injection driven polariton lasers.Graphical abstract

Enhancing frequency stability and mode control in a Brillouin random fiber laser with a strongly scattering disordered grating

Random fiber lasers (RFLs) with disordered scattering feedback media provide a range of functionalities and properties. The primary drawback with weak Rayleigh scattering (RS)-based RFLs is their large frequency drift and mode hopping, which are caused by the random walk of photons at different round trips. Here, we present a technique to control the mode propagation of RFLs by using a narrow gain bandwidth from stimulated Brillouin scattering and photon localization from a strongly scattering disordered grating. Multiple scattering of light within the disordered grating leads to photon localization and narrow reflection peaks, which suppresses frequency drift and reduces the number of modes. The compact Brillouin random fiber laser (BRFL) with a 200 m strongly scattering disordered grating enables single-mode lasing with an ultra-narrow linewidth of ∼650 Hz. The results of the real-time spectral evolution obtained by the heterodyne method demonstrate long-term stability of the lasing frequency, confirming the capability of the strongly scattering disordered grating to control mode propagation of the BRFL. The BRFL exhibits an ultra-high frequency stability of 0.48 MHz and mode-hop-free operation up to 120 s. This work provides a perspective on the development of RFLs with high coherence and stability.

Compact simultaneous label-free autofluorescence multi-harmonic microscopy for user-friendly photodamage-monitored imaging.

Label-free nonlinear optical microscopy has become a powerful tool for biomedical research. However, the possible photodamage risk hinders further clinical applications. To reduce these adverse effects, we constructed a new platform of simultaneous label-free autofluorescence multi-harmonic (SLAM) microscopy, featuring four-channel multimodal imaging, inline photodamage monitoring, and pulse repetition-rate tuning. Using a large-core birefringent photonic crystal fiber for spectral broadening and a prism compressor for pulse pre-chirping, this system allows users to independently adjust pulse width, repetition rate, and energy, which is useful for optimizing imaging conditions towards no/minimal photodamage. It demonstrates label-free multichannel imaging at one excitation pulse per image pixel and thus paves the way for improving the imaging speed by a faster optical scanner with a low risk of nonlinear photodamage. Moreover, the system grants users the flexibility to autonomously fine-tune repetition rate, pulse width, and average power, free from interference, ensuring the discovery of optimal imaging conditions with high SNR and minimal phototoxicity across various applications. The combination of a stable laser source, independently tunable ultrashort pulse, photodamage monitoring features, and a compact design makes this new system a robust, powerful, and user-friendly imaging platform.

Generation of stable femtosecond pulses using MoS2−xSex as the saturable absorber in Er-doped fiber laser

A new transition-metal dichalcogenide (Janus TMDs), molybdenum selenide sulfide (MoS[Formula: see text]Se[Formula: see text]), has attracted wide attention due to its unique and highly stable alloy structure, high carrier mobility and the ability to modulate the band gap based on composition. In this work, MoS[Formula: see text]Se[Formula: see text] nanosheets were prepared through liquid phase exfoliation and further prepared as a saturable absorber (SA). The nonlinear optical response was investigated by the homemade balanced twin-detector measurement system, revealing the potential of MoS[Formula: see text]Se[Formula: see text]-SA in ultrafast photonics. The SA devices exhibited good saturation absorption characteristics. By applying it to the Er-doped fiber laser, a stable mode-locked fiber laser based on MoS[Formula: see text]Se[Formula: see text]-SA was successfully achieved. The pulse width was measured to be 509 fs, with a spectral width of 6.33 nm and a maximum output power of 7.44 mW in the mode-locked state. This is the first reported instance of achieving mode-locking operation in the Er-doped fiber laser using MoS[Formula: see text]Se[Formula: see text]-SA, indicating its great potential for applications in ultrafast photonics.

Pulsed Ho:YLF laser intra-cavity pumped by a diode-pumped Q-switched Tm:YAP laser.

We reported an intra-cavity pumped Q-switched laser with dual-wavelength synchronous output at 2066.7 nm and 1940nm. Ho:YLF crystal was pumped by a self-Q-switched Tm:YAP laser, which was served as both a gain medium and a saturable absorber simultaneously. For Ho:YLF laser, under 11.4-W incident pump power, a stable pulse laser was achieved at 2066.7 nm with the highest peak power of 69.65 W and the pulse repetition rate of 42.14 kHz. Under the same incident pump power, the highest peak power and pulse repetition rate of Tm:YAP laser were 17.85 W and 50.82 kHz, corresponding to the central wavelength of 1940nm. These results suggested that Q-switching without additional absorber element were effective way to obtain high-efficiency and compact 2.1 µm pulsed laser.

Repetition rate difference, stability and polarization extinction ratio of single-cavity polarization-multiplexed fiber laser with weak birefringence

We investigated a stable single-cavity polarization-multiplexed ring fiber laser with weak birefringence. The feasibility of the weak intrinsic residual birefringence to induce polarization-multiplexed pulses with low repetition rate difference under dual/triple-comb modes is experimentally verified. The significant evolution of the relative stability and polarization extinction ratio, and its physical mechanism are revealed when adjusting the linear intracavity loss. These results provide further understanding of the influence of birefringence amount, loss, dispersion, and multiple pulse interaction on the polarization-multiplexed pulses. Meanwhile, the intriguing pulse characteristics such as low repetition rate difference, qualified relative stability and unique wavelength/polarization multiplexing are experimentally obtained, showing the high potential to promote the wide applicability and performance improvement of multiple-comb metrology such as dual/triple-comb frequency measurement.

Topological laser on square lattice with gain–loss-induced higher-order corner modes

We investigate the higher-order topological laser in the two-dimensional (2D) coupled-cavity array. By adding staggered on-site gain and loss to the 2D Hermitian array with a trivial phase, the system will emerge degenerate topological corner modes, which are protected by bulk band gap. For such a non-Hermitian model, by adjusting the parameters of the system and introducing the pumping into the cavity at the corner, a single-mode lasing with topological protection emerges. Furthermore, single-mode lasing exists over a wide range of pumping strengths. No matter where the cavity is initially stimulated, after enough time evolution, all the cavities belonging to the topological corner mode can emit a stable laser.

Tailoring Sub‐Doppler Spectra of Thermal Atoms with a Dielectric Optical Metasurface Chip

AbstractCompact and robust structures to precisely control and acquire atomic spectra are increasingly important for the pursuit of widespread applications. Sub‐Doppler responses of thermal atoms are critical in constructing high‐precision devices and systems. In this study, a nanograting metasurface specifically is designed for atomic rubidium vapor and integrated it into a miniature vapor cell. Using the metasurface with built‐in multifunctional controls for light, pump‐probe atomic spectroscopy is established and sub‐Doppler responses are experimentally observed at low incident power. Moreover, the sub‐Doppler lineshape can be tailored by varying the incident polarization state. The spectrum transformation from absorption to transparency is observed. Using one of the sharp responses, laser stabilization with a stability of at 2 s can be achieved. This work reveals the effective control of atomic spectra with optical metasurface chips, which may have great potential for future developments in fundamental optics and novel optical applications.

Analysis of the interaction-length dependence of frequency stability in an iodine-stabilized Nd:YAG laser.

We report a numerical simulation and an experimental study on the interaction-length dependence of frequency stability in an iodine-stabilized neodymium-doped yttrium aluminum garnet (Nd:YAG) laser. A saturation spectroscopy model was used in the simulation to calculate the interaction-length dependence of the linewidth and signal-to-noise ratio of the iodine saturation spectrum. We determined that 2m was the optimal interaction length for laser-frequency stabilization. We confirmed the simulation results by performing modulation transfer spectroscopy and laser-frequency stabilization using 45-cm- and 2-m-long iodine cells and multipass configurations. The results of this study are useful for designing compact and highly stable iodine-stabilized lasers.

Process stability in laser–MIG hybrid welding of aluminum alloys with various laser and arc distances

During laser–MIG hybrid welding process of aluminum alloys, the distance between laser and arc heat source (DLA) is one of the key factors which affect the welding process stability. Weld formation exhibited various penetration depths, since the interaction between laser and arc changed. Hybrid plasma morphology fluctuated significantly at DLA of 0 mm and hybrid plasma height decreased with the increase of DLA. Violent evaporation of droplet and spatters were generated at DLA of 0 mm. Moreover, keyhole fluctuated violently and significant downward flow of liquid metal was induced at the bottom zone of molten pool due to the impact action of droplet. Keyhole fluctuation was suppressed and molten pool stability was improved at DLA of 2 mm.

Centralized design and production of the ultra-high vacuum and laser-stabilization systems for the AION ultra-cold strontium laboratories

This paper outlines the centralized design and production of the ultra-high-vacuum sidearm and laser-stabilization systems for the AION Ultra-Cold Strontium Laboratories. Commissioning data on the residual gas and steady-state pressures in the sidearm chambers, on magnetic field quality, on laser stabilization, and on the loading rate for the 3D magneto-optical trap are presented. Streamlining the design and production of the sidearm and laser stabilization systems enabled the AION Collaboration to build and equip in parallel five state-of-the-art Ultra-Cold Strontium Laboratories within 24 months by leveraging key expertise in the collaboration. This approach could serve as a model for the development and construction of other cold atom experiments, such as atomic clock experiments and neutral atom quantum computing systems, by establishing dedicated design and production units at national laboratories.

Heterogeneous tunable III-V-on-silicon-nitride mode-locked laser emitting wide optical spectra

We demonstrate a III-V-on-silicon-nitride mode-locked laser through the heterogeneous integration of a semiconductor optical amplifier on a passive silicon-nitride cavity using the technique of micro-transfer printing. In the initial phase of our study, we focus on optimizing the lasing wavelength to be centered at 1550 nm. This optimization is achieved by conducting experiments with 27 mode-locked lasers, each incorporating optical amplifiers featuring distinct multiple-quantum-well photoluminescence values. Subsequently we present a comprehensive study investigating the behavior of the mode-locking regime when the electrical driving parameters are varied. Specifically, we explore the impact of the gain voltage and saturable absorber current on the locking stability of a tunable mode-locked laser. By manipulating these parameters, we demonstrate the precise control of the optical spectrum across a wide range of wavelengths spanning from 1530 to 1580 nm. Furthermore, we implement an optimization approach based on a Monte Carlo analysis aimed at enhancing the mode overlap within the gain region. This adjustment enables the achievement of a laser emitting a 23-nm-wide spectrum while maintaining a defined 10 dB bandwidth for a pulse repetition rate of 3 GHz.

CONTEXTUALIZATION OF HISTORY AND DEVELOPMENT

The field of optical materials research stands at a pivotal juncture, driven by the relentless pursuit of advancements in laser technology. This study delves into the development and characterization of novel optical materials designed to enhance the performance and reliability of laser systems. Through a comprehensive investigation combining theoretical modeling, material synthesis, and empirical analysis, we identify key material properties that significantly influence laser efficiency and stability. Our research focuses on the exploration of new dopants, host materials, and fabrication techniques to achieve optimal thermal management, higher damage thresholds, and improved lasing efficiencies.

TECHNOLOGICAL ADVANCEMENTS IN SOLID-STATE LASERS AND FIBER LASERS

In this article through a comprehensive investigation combining theoretical modeling, material synthesis, and empirical analysis, we identify key material properties that significantly influence laser efficiency and stability. Our research focuses on the exploration of new dopants, host materials, and fabrication techniques to achieve optimal thermal management, higher damage thresholds, and improved lasing efficiencies.