Abstract

Passively mode-locked fiber lasers based on a nonlinear polarization rotation (NPR) have attracted much attention due to their ability to generate short pulses with wide spectra and high peak power. However, environmental perturbations can easily cause the lasers to lose the mode-locked state and make it a challenge for practical application. The aim of this research is to improve the laser stability by inserting a Lyot filter into the mode-locked laser cavity. The experimental results indicate that the mode-locked state can be maintained when the radius of the fiber loop is changed from 7.5 to 1.5 cm, while the signal-to-noise ratio of the fundamental frequency remains almost the same. The tunability of the output power can be achieved by adding a half-wave plate (HWP) in the laser cavity without changing the pump power, while the mode-locked state remains stable. By adjusting the angle of the HWP2, the output power can be adjusted from 3.36 to 66.5 mW at repetition rate of 29.7 MHz.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call