Kinetic Variables Research Articles

Oxygen Uptake and Bilaterally Measured Vastus Lateralis Muscle Oxygen Desaturation Kinetics in Well-Trained Endurance Cyclists.

The aim of the present study was to compare and analyse the relationships between pulmonary oxygen uptake and vastus lateralis (VL) muscle oxygen desaturation kinetics measured bilaterally with Moxy NIRS sensors in trained endurance athletes. To this end, 18 trained athletes (age: 42.4 ± 7.2 years, height: 1.837 ± 0.053 m, body mass: 82.4 ± 5.7 kg) visited the laboratory on two consecutive days. On the first day, an incremental test was performed to determine the power values for the gas exchange threshold, the ventilatory threshold (VT), and V̇O2max levels from pulmonary ventilation. On the second day, the athletes performed a constant work rate (CWR) test at the power corresponding to the VT. During the CWR test, the pulmonary ventilation characteristics, left and right VL muscle O2 desaturation (DeSmO2), and pedalling power were continuously recorded, and the average signal of both legs' DeSmO2 was computed. Statistical significance was set at p ≤ 0.05. The relative response amplitudes of the primary and slow components of VL desaturation and pulmonary oxygen uptake kinetics did not differ, and the primary amplitude of muscle desaturation kinetics was strongly associated with the initial response rate of oxygen uptake. Compared with pulmonary O2 kinetics, the primary response time of the muscle desaturation kinetics was shorter, and the slow component started earlier. There was good agreement between the time delays of the slow components describing global and local metabolic processes. Nevertheless, there was a low level of agreement between contralateral desaturation kinetic variables. The averaged DeSmO2 signal of the two sides of the body represented the oxygen kinetics more precisely than the right- or left-leg signals separately.

Comparison between a novel helical and a posterior ankle–foot orthosis on gait in people with unilateral foot drop: a randomised crossover trial

BackgroundNeuromuscular disease and peripheral neuropathy may cause drop foot with or without evertor weakness. We developed a helical-shaped, non-articulated ankle–foot orthosis (AFO) to provide medial–lateral stability while allowing mobility, to improve gait capacity. Our aim was to evaluate the effect of the helical AFO (hAFO) on functional gait capacity (6-min walk test) in people with peripheral neuropathy or neuromuscular disease (NMD) causing unilateral drop foot and compare with a posterior leaf spring AFO (plsAFO). Secondary aims were to compare functional mobility, 3D kinematic and kinetic gait variables and satisfaction between the AFOs.MethodsSingle centre, randomised crossover trial from January to July 2017 in 20 individuals (14 with peripheral neuropathy and 6 with NMD, 12 females, mean age 55.6 years, SD 15.3); 10 wore the hAFO for the first week and 10 wore the plsAFO before switching for the second week. The 6-min walk test (6MWT), Timed Up and Go (TUG) test and 3D gait analysis were evaluated with the hAFO, the plsAFO and shoes only (noAFO) at inclusion and 1 week after wearing each orthosis. Satisfaction was evaluated with the Quebec user evaluation of satisfaction with assistive technology (QUEST).ResultsMedian [interquartile range] 6MWT distance was greater with the hAFO (444 m [79]) than the plsAFO (389 m [135], P < 0.001, Hedge’s g = 0.6) and noAFO (337 m [91], P < 0.001, g = 0.88). TUG time was shorter with the hAFO (8.1 s [2.8]) than the plsAFO (9.5 s [2.6], P < 0.001, g = − 0.5) and noAFO (10.0 s [2.6]), P < 0.001, g = − 0.6). The plsAFO limited plantarflexion during the loading response (plsAFO − 7.5 deg [6.0] vs. noAFO -13.0 deg [10.0], P = 0.0007, g = − 1.0) but the hAFO did not (− 11.0 deg [5.1] vs. noAFO, P = 0.05, g = − 0.5). Quasi-stiffness was lower for the hAFO than plsAFO (P = 0.009, g = − 0.7). The dimensionless eversion moment was higher (though not significantly) with the hAFO than noAFO. Neither orthosis reduced ankle power (P = 0.34). Median total QUEST score was higher for the hAFO (4.7 [0.7]) than the plsAFO (3.6 [0.8]) (P < 0.001, g = 1.9).ConclusionsThe helical orthosis significantly and considerably improved functional gait performance, did not limit ankle mobility, increased lateral stability, though not significantly, and was associated with greater patient satisfaction than the posterior leaf spring orthosis.Trial registration The trial began before registration was mandatory

Effects of Foot-Toe Orthoses on Moment and Range of Motion of Knee Joint in Individuals with Hallux Valgus.

Although various types of hallux valgus (HV) orthoses have been used to manage hallux valgus deformity, few previous studies have determined the biomechanical effects of applying a foot-toe orthosis as a therapeutic intervention for HV deformity on the kinetics and kinematics of the knee joint. Biomechanical variables were collected from 24 patients with HV. A three-dimensional motion capture system and force platforms were used to analyze the kinetic and kinematic variables in HV orthosis conditions during gait. To determine the biomechanical effect of each orthosis for HV on knee kinetic and kinematic values, repeated-measures ANOVA was used. The knee adduction moment was significantly decreased under a hard plastic orthosis (HPO) condition compared to that under a without foot-toe orthosis (WTO) condition (p = 0.004). There was a significant decrease in maximal external rotation of the knee joint in HPO than in WTO at the stance phase during gait (p = 0.021). All of the kinetic and kinematic data showed no significant differences between WTO and soft silicone orthosis conditions (p > 0.05). This study indicates that a stronger foot-toe orthosis, such as HPO, to correct HV deformity has a positive effect on the moment and joint motion occurring in the knee joint during walking. In particular, the application of this type of HV orthosis can reduce knee adduction moments associated with the development and progression of knee OA.

Non-invasive ventilatory support accelerates the oxygen uptake and heart rate kinetics and improves muscle oxygenation dynamics in COPD-HF patients

BackgroundThe aim of this study was to explore the effects of non-invasive positive pressure ventilation (NIPPV) associated with high-intensity exercise on heart rate (HR) and oxygen uptake (V̇O2) recovery kinetics in in patients with coexistence of chronic obstructive pulmonary disease (COPD) and heart failure (HF). MethodsThis is a randomized, double blinded, sham-controlled study involving 14 HF-COPD patients, who underwent a lung function test and Doppler echocardiography. On two different days, patients performed incremental cardiopulmonary exercise testing (CPET) and two constant-work rate tests (80% of CPET peak) receiving Sham or NIPPV (bilevel mode - Astral 150) in a random order until the limit of tolerance (Tlim). During exercise, oxyhemoglobin and deoxyhemoglobin were assessed using near-infrared spectroscopy (Oxymon, Artinis Medical Systems, Einsteinweg, Netherland). ResultsThe kinetic variables of both V̇O2 and HR during the high-intensity constant workload protocol were significantly faster in the NIPPV protocol compared to Sham ventilation (P < 0.05). Also, there was a marked improvement in oxygenation and lower deoxygenation of both peripheral and respiratory musculature in TLim during NIPPV when contrasted with Sham ventilation. ConclusionsNIPPV applied during high-intensity dynamic exercise can effectively improve exercise tolerance, accelerate HR and V̇O2 kinetics, improve respiratory and peripheral muscle oxygenation in COPD-HF patients. These beneficial results from the effects of NIPPV may provide evidence and a basis for high-intensity physical training for these patients in cardiopulmonary rehabilitation programs.

Biomechanical effects of fatigue on lower-body extremities during a maximum effort kettlebell swing protocol

ABSTRACT Kettlebell training provides multiple health benefits, including the generation of power. The primary purpose of this study was to examine the kinematics and kinetics of lower-body joints during a repeated, maximum effort kettlebell swing protocol. Sixteen resistance and kettlebell swing experienced males performed 10 rounds of a kettlebell swing routine (where one round equates to 30s of swings followed by 30s of rest). Kinematic (i.e., swing duration and angular velocities) and kinetic (i.e., normalised sagittal plane ground reaction force, resultant joint moment [RJM] and power) variables were extracted for the early portion and late portion of the round. Average swing duration and the magnitude of normalised ground reaction forces (GRF) increased within rounds, while hip joint power decreased. Changes in swing duration were minimal, but consistent due to an increase in overall fatigue. An increase in the magnitude of GRF was observed at the end of rounds, which is a potential concern for injury. Hip joint power decreased primarily due to a slower angular velocity. This protocol may be an effective routine for those who are resistance trained with kettlebell swing experience, and who want to optimise power in their exercise program.

Asymmetries of kinematics and kinetics in female and male sprinting.

This study examined asymmetries in spatiotemporal (e.g. step length and frequency) and kinetic variables during maximal speed sprinting and aimed to determine differences in the asymmetries between female and male sprinters, and to examine relationships between magnitudes of asymmetries and sprint performance. Thirty-two female and 32 male sprinters, who were of comparable performance levels, performed 60-m sprints. Spatiotemporal and ground reaction force variables during maximal speed phase were measured using a long force platform system. The asymmetry was calculated as a difference between values obtained from right and left sides divided by the mean of the two sides. The magnitudes of asymmetries in step length (4.60% vs. 3.08%), step frequency (4.70% vs. 3.11%), stance time (3.81% vs. 2.12%), vertical impulse (8.41% vs. 5.30%) and braking mean force (13.32% vs. 8.55%) for male sprinters were greater than those for female sprinters. No significant correlation was found between maximal running speed and magnitudes of asymmetries for female or male sprinters. The results demonstrate that the magnitudes of asymmetries in step length, step frequency, stance time, vertical impulse and braking mean force during sprinting could be greater in male sprinters. Moreover, no magnitude of asymmetries could be associated with sprint performance for female and male sprinters. Although it is likely beneficial to be aware that there are greater asymmetries in male sprinting during the maximal speed phase compared to female sprinting as a baseline, the magnitudes of asymmetries can be individually different regardless of performance level.

Influence of Complex Training Design on Acute Postactivation Performance Enhancement of Jump Squat and Ballistic Bench Throw Performance in Developing Team-Sport Athletes

Poulos, N, Haff, GG, Nibali, M, Norris, D, and Newton, R. Influence of complex training design on acute postactivation performance enhancement of jump squat and ballistic bench throw performance in developing team-sport athletes. J Strength Cond Res 37(5): 969-979, 2023-The effect of complex training (CT) session design on acute postactivation performance enhancement (PAPE) of loaded jump squat(s) (JS) and ballistic bench throw(s) (BBT) was examined. This study further investigated whether relative strength is a moderating factor in PAPE in response to 3 distinct CT protocols. Fourteen Australian Football League (AFL) Academy athletes performed 3 different protocols comprising 85% 1 repetition maximum (1RM) back squats and bench press, and 30% 1RM loaded JS and BBT, differing in the sequencing of exercise order (i.e., complex pairs performed in isolation or with additional exercise interspersed within the intracomplex recovery period) and duration of the intracomplex recovery (2.5, 5, or 15 minutes). Differences in JS and BBT performance between CT protocols were trivial except for JS eccentric depth and eccentric impulse where small to moderate substantial differences were observed between protocols 2 and 3 in various sets; a small difference was observed between protocols 1 and 3 for eccentric depth. Small differences between protocols 1 and 2 were observed in set 1 in BBT peak velocity (ES = -0.26) and peak power (W·kg-1) (ES = -0.31). Small magnitudes of PAPE and decrements in performance were observed in some variables within protocols, yet effects across sets were inconsistent. Relative strength was negatively associated with JS performance (i.e., stronger athletes demonstrated a lower magnitude of PAPE) yet positively associated with PAPE of BBT peak force (N·kg-1) and peak power (W·kg-1). Alternating lower-body and upper-body complex sets and performance of ancillary exercise within the intracomplex recovery does not contribute to cumulative fatigue throughout the session and does not detrimentally affect subsequent JS and BBT performance. The manipulation of complex-set sequences offers practitioners a time-efficient means of providing both lower-body and upper-body heavy-resistance and ballistic training stimuli to achieve chronic training adaptations in maximal strength and power, with targeted improvements in specific kinetic and kinematic variables.

Effects of load increase on lower extremity kinetic and kinematic variables in the back squat exercise.

Squats are one of the most widely used weight training methods worldwide, and the single most ubiquitous with regard to multi-joint resistance training. The objective of the present study was to investigate kinematic and kinetic changes in the lower extremities as a result of load increases during a back squat exercise, and to propose an association between back squats and lower extremity injuries. Eight individuals with experience of back squat training were recruited. The subjects performed back squats with loads of 25%, 50%, 100%, and 125% of their body weight. During the performance, the center of pressure (COP) sway; vertical center of mass (COM) velocity; joint moment; joint range of motion (ROM) of flexion/extension and adduction/abduction; and rotation of the ankle, knee, and hip joints were measured. The participants' lower extremity joint ROM, vertical COM velocity, and COP variability did not change significantly with changes in weight loading. However, the moments applied to the lower extremity joints differed according to changes in barbell weight. The moments of plantar flexion (f= 54.362, p< 0.001), dorsiflexion (f= 8.475, p< 0.001), knee flexion (f= 12.013, p< 0.001), knee extension (f= 8.581, p< 0.001), hip flexion (f= 5.111, p< 0.001), and hip extension (f= 11.053, p< 0.001) increased in the sagittal plane (flexion/extension). There was also a significant increase in ankle eversion (f= 5.612, p= 0.004), hip abduction (f= 3.242, p= 0.037), and adduction (f= 5.846, p= 0.003) in the frontal plane (adduction/abduction). Among the moment variables in the transverse plane (rotation), there were significant differences in ankle internal rotation (f= 7.043, p= 0.001) and hip external rotation (f= 11.070, p< 0.001). As the barbell load increased, posture and performance were maintained, but rotational moments of the joints differed. It is expected that the joint directions that showed significant differences in this study are likely to be vulnerable to the risk of injury when an excessive load is applied to the body. Examples include the hip adduction moment, hip external rotation moment, and ankle internal rotation moment, and apply regardless of the increase in the rotational moments of joints from load increases.

Simulation of Lower Limb Muscle Activation Using Running Shoes with Different Heel-to-Toe Drops Using Opensim.

Although numerous studies have been conducted to investigate the acute effects of shoe drops on running kinematics and kinetic variables, their effects on muscle forces remain unknown. Thus, the primary aim of this study was to compare the muscle force, kinematics, and kinetic variables of habitually rearfoot runners with heel-to-toe drops of negative 8 mm shoes (minimalist shoes) and positive 9 mm shoes (normal shoes) during the running stance phase by using musculoskeletal modeling and simulation techniques. Experimental data of lower limb kinematics, ground reaction force, and muscle activation from 16 healthy runners with rearfoot strike patterns were collected and analyzed in OpenSim. Using Matlab, the statistical parameter mapping paired t-test was used to compare the joint angle, moment, and muscle force waveform. The results revealed differences in the sagittal ankle and hip angles and sagittal knee moments between the different heel-to-toe drops of running shoes. Specifically, it showed that the negative 8 mm running shoes led to significantly smaller values than the positive 9 mm running shoes in terms of the angle of ankle dorsiflexion, ankle eversion, knee flexion, hip flexion, and hip internal and hip external rotation. The peak ankle dorsiflexion moment, ankle plantarflexion moment, ankle eversion moment, knee flexion moment, knee abduction moment, and knee internal rotation also decreased obviously with the minimalist running shoes, while the lateral gastrocnemius, Achilleas tendon, and extensor hallucis longus muscles were obviously greater in the minimalist shoes compared to normal shoes. The vastus medialis, vastus lateralis and extensor digitorum longus muscles force were smaller in the minimalist shoes. Runners may shift to a midfoot strike pattern when wearing negative running shoes. High muscle forces in the gastrocnemius lateral, Achilleas tendon, and flexor hallucis longus muscles may also indicate an increased risk of Achilleas tendonitis and ankle flexor injuries.

Differences in kinetic characteristics during countermovement jump of football players with cerebral palsy according to impairment profiles.

Objectives: The purpose of this study was 1) to determine and compare kinetic parameters during the realization of a countermovement jump (CMJ) between footballers with cerebral palsy (CP) and non-impaired footballers, and 2) to analyze the differences in this action between different players' impairment profiles and a group of non-impaired footballers. Methods: This study involved 154 participants comprising 121 male footballers with CP from 11 national teams and 33 male non-impaired football players recruited as the control group (CG). The footballers with CP were described according to the different impairment profiles (bilateral spasticity = 10; athetosis or ataxia = 16; unilateral spasticity = 77; minimum impairment = 18). All participants performed three CMJs on a force platform to record kinetic parameters during the test. Results: The group of para-footballers presented significantly lower values than the CG in the jump height (p < 0.01, d = -1.28), peak power (p < 0.01, d = -0.84), and the net concentric impulse (p < 0.01, d = -0.86). Concerning the pairwise comparisons between CP profiles and the CG, significant differences were found for the bilateral spasticity, athetosis or ataxia, and unilateral spasticity subgroups compared to the non-impaired players for jump height (p < 0.01; d = -1.31 to -2.61), power output (p < 0.05; d = -0.77 to -1.66), and concentric impulse of the CMJ (p < 0.01; d = -0.86 to -1.97). When comparing the minimum impairment subgroup with the CG, only significant differences were found for jump height (p = 0.036; d = -0.82). Footballers with minimum impairment presented higher jumping height (p = 0.002; d = -1.32) and concentric impulse (p = 0.029; d = -1.08) compared to those with bilateral spasticity. Also, the unilateral spasticity subgroup reports a higher jump height performance than the bilateral group (p = 0.012; d = -1.12). Conclusion: These results suggest that the variables related to power production during the concentric phase of the jump are crucial for the performance differences between groups with and without impairment. This study provides a more comprehensive understanding of kinetic variables that would differentiate CP and non-impaired footballers. However, more studies are necessary to clarify which parameters better differentiate among different profiles of CP. The findings could help to prescribe effective physical training programs and support the classifier's decision-making for class allocation in this para-sport.

Investigation of the Reaction Kinetics of Poly(butylene terephthalate) and Epoxide Chain Extender

AbstractPolyesters, such as poly (butylene terephthalate) (PBT), owe a rather low melt strength, which is considered as not beneficial for foaming. To overcome this issue, a typical attempt is the incorporation of chemical modifications—so‐called chain extenders (CE)—in the reactive extrusion process. In this study, the reaction kinetic variables are investigated depending on the material and process parameters. For this purpose, different series of experiments are performed with varying PBT with different molecular weights and the commonly used CE, Joncryl ADR4468, on a micro compounder. The screw force is recorded and analyzed using an Avrami and an Arrhenius plot. First, the amount of CE is systematically varied. To study the course of the reaction in more detail, the reaction is stopped in a series of measurements (10, 30, 60, and 90 s after complete filling). Gel permeation chromatography (GPC), Fourier transform infrared spectroscopy (FT‐IR), and Raman spectra are recorded. In the second series, the effect of processing temperatures between 250 and 270 °C is investigated, and finally, in the third series, the average molecular weight of PBT is varied. It could be shown that the activation energy seems to be dependent on the initial molecular weight; lower molecular weights result in lower activation energy.

Isolating the speed factor is crucial in gait analysis for Parkinson's disease.

Parkinson's disease (PD) is characterized by an alteration of the walking gait, frequently including a slower self-selected walking speed (SSWS). Although the reduction of walking speed is inherent to people with PD, such speed reduction also represents a potential confounding factor that might partly explain the observed gait differences between PD and control participants. In this study, each participant walked along a 25 m level corridor during which vertical ground reaction force signals were recorded using shoes equipped with eight pressure sensors. Vertical ground reaction force signals (using statistical parametric mapping) and temporal and kinetic variables as well as their related variability and asymmetry (using Student's t-test) were compared between PD (n = 54) and walking-speed-matched control subjects (n = 39). Statistical parametric mapping did not yield significant differences between PD and control groups for the vertical ground reaction force signal along the walking stance phase. Stride time and single support time (equivalent to swing time) were shorter and peak vertical ground reaction force was larger in PD patients compared to controls (p ≤ 0.05). However, the single support time was no longer different between people with PD and healthy subjects when expressed relatively to stride time (p = 0.07). While single support, double support, and stance times were significantly more variable and asymmetric for PD than for the control group (p ≤ 0.05), stride time was similar (p ≥ 0.07). These results indicate that at matched SSWS, PD patients adopt a higher cadence than control participants. Moreover, the temporal subdivision of the walking gait of people with PD is similar to healthy individuals but the coordination during the double support phase is different. Hence, this study indicates that isolating the speed factor is crucial in gait analysis for PD.

Observing the ping-pong modality of the isospin degree of freedom in cluster emission from heavy-ion reactions

Two-body correlations of the isotope-resolved light and heavy clusters are measured in $^{86}$Kr+$^{\rm 208}$Pb reactions at 25 MeV/u. The yield and kinetic variables of the $A=3$ isobars, triton and $^3$He, are analyzed in coincidence with the heavy clusters of $7\le A \le 14$ emitted at the earlier chance. While the velocity spectra of both triton and $^3$He exhibit scaling behavior over the type of the heavy clusters, the yield ratios of ${\rm t/^3He}$ correlate reversely to the neutron-to-proton ratio $N/Z$ of the latter, showing the ping-pong modality of the $N/Z$ of emitted clusters. The commonality that the $N/Z$ of the residues keeps the initial system value is extended to the cluster emission in heavy ion reactions. The comparison of transport model calculations to the data is discussed.

Thermodynamically-equilibrium LCST phase diagram of PCL/SAN mixtures determined by thermal analysis: Opposing effects of hydrophilic and hydrophobic silica nanoparticles

In this work, the isothermal crystallization kinetics of PCL in PCL/SAN blend and PCL/SAN/nanosilica nanocomposite systems has been applied as a useful and sensitive variable for determining the LCST phase diagram. By eliminating the impacts of kinetic variables, the variations in the equilibrium LCST phase boundary of PCL/SAN mixtures were evaluated. The presence of hydrophobic nanoparticles shifted the equilibrium LCST phase diagram to higher temperatures as expected owing to the compatibilization effect of nanoparticles, while the hydrophilic nanoparticles shifted it to lower temperature. The preferential migration of hydrophilic nanosilica into SAN-rich phase with slower molecular dynamics caused larger viscoelastic asymmetry of polymeric phases and consequently, lower area of phase miscibility window. In contrast, the addition of hydrophobic nanosilica with better dispersion state and no preferential localization in PCL/SAN blend resulted in a shift of LCST phase diagram to higher temperatures.

Relationship between kinetic variables of weightlifters to lift the barbell to its maximum height in the snatch lift and kinetic variables in the stage of dropping the barbell

The objective of the present research was to study the relationship between kinetic variables of weightlifters to lift the barbell to its maximum height in the snatch lift and kinetic variables in the stage of dropping the barbell. The research sample consisted of 6 Iraqi national team weightlifters. The instruments used in this study were weightlifting tools, 1-meter-long drawing scale, Rustameter device to measure the height, two Canon video cameras, a scale to measure the weight of weightlifters, an attempt scoreboard, and a portable personal computer. Regarding the attempts for the snatch lift, three attempts were given to each weightlifter according to international weightlifting regulations, and the best successful attempt was analysed. The statistical analyses were carried out with the Statistical Package for the Social Sciences (SPSS), version 23. There were three significant correlations between the work done dropping the barbell and the momentum, energy and power lifting the barbell (p&lt;0.05). In conclusion, the increase of the momentum, kinetic energy, work done, and power has a positive role in the process of lifting the barbell to its maximum height in the snatch lift and dropping the barbell.

Increased Comfortable Gait Speed Is Associated With Improved Gait Biomechanics in Persons With Chronic Stroke Completing an 8-Week Forced-Rate Aerobic Cycling Intervention: A Preliminary Study.

Task-specific gait training is recommended to improve locomotor function after stroke. Our objective was to determine the effects of a forced-rate aerobic exercise intervention on gait velocity and biomechanics in the absence of task-specific gait training. Individuals with chronic stroke ( N = 14) underwent 24 sessions of forced-rate aerobic exercise, at a targeted aerobic intensity of 60%-80% of their heart rate reserve. Change in comfortable walking speed in addition to spatiotemporal, kinematic, and kinetic variables were measured using three-dimensional motion capture. Overground walking capacity was measured by the 6-min walk test. To determine gait biomechanics associated with increased walking speed, spatiotemporal, kinematic, and kinetic variables were analyzed separately for those who met the minimal clinically important difference for change in gait velocity compared with those who did not. Participants demonstrated a significant increase in gait velocity from 0.61 to 0.70 m/sec ( P = 0.004) and 6-min walk test distance from 272.1 to 325.1 meters ( P < 0.001). Those who met the minimal clinically important difference for change in gait velocity demonstrated significantly greater improvements in spatiotemporal parameters ( P = 0.041), ground reaction forces ( P = 0.047), and power generation ( P = 0.007) compared with those who did not. Improvements in gait velocity were accompanied by normalization of gait biomechanics.

Are foot posture and morphological deformation associated with ankle plantar flexion isokinetic strength and vertical drop jump kinetics? A principal component analysis

ABSTRACT Static measurements are clinically useful in characterising foot morphology, but it remains unclear to what extent it can influence dynamic lower limb performance. Therefore, the purpose of this study was to investigate if foot posture or foot morphology deformation relates to ankle plantarflexion isokinetic strength and specific kinetics variables during jumping using principal component analysis (PCA). Thirty-eight physically active participants performed drop vertical jump (DVJ) onto force platforms and ankle plantarflexion contractions in different modalities on an isokinetic dynamometer. Foot posture was assessed using the Foot Posture Index–6 item, whereas foot one-, two- and three-dimensional morphological deformation was calculated using the Arch Height Index Measurement System. A PCA was applied to the ankle plantarflexion and kinetics performance data and correlations between PCs and foot parameters measured. The analysis revealed 3 PCs within the ankle plantarflexion and DVJ kinetics variables that captured more than 80% of the variability within the data, but none of them showed significant correlations (r ≤ 0.27) with any foot variables. While foot posture and foot morphological deformation remain of interest in characterising foot morphology across individuals, these findings highlight the lack of clinical relevance of these static evaluations at characterising lower limb and ankle performance.

Using Wearables to Monitor Swimmers’ Propulsive Force to Get Real-Time Feedback and Understand Its Relationship to Swimming Velocity

Evidence on the role of propulsion compared to drag in swimming, based on experimental settings, is still lacking. However, higher levels of propulsion seem to lead to faster swimming velocities. The aim of this study was to understand the variation in a set of kinematic and kinetic variables between two swimming sections and their relationship to swimming velocity. The sample consisted of 15 young adult recreational swimmers (8 males: 20.84 ± 2.03 years; 7 females: 20.13 ± 1.90 years). Maximum swimming velocity and a set of kinematic and kinetic variables were measured during two consecutive sections of the swimming pool. Differences between sections were measured and the determinants of swimming velocity were analyzed. Swimming velocity, propulsive force, and the other kinematic and kinetic variables did not change significantly (p &lt; 0.05) between sections (only the intra-cyclic fluctuation of swimming velocity decreased significantly, p = 0.005). The modeling identified the propulsive force, stroke length, and active drag coefficient as the determinants of swimming velocity. Swimming velocity was determined by the interaction of kinematic and kinetic variables, specifically propulsive force and active drag coefficient.

The development and evaluation of an in-vitro shoulder simulator with active muscle simulation

The purpose of the present study was to develop a novel active in-vitro shoulder simulator to emulate all forms of planar and non-planar glenohumeral motions with active muscle simulation on cadaver specimens or shoulder models and to critically evaluate its performance. A physiologic shoulder simulator, driven using simulated muscle force, was developed to dynamically realize accurate kinematic control in all three rotational degrees of freedom (DOF) under physiological kinetic boundaries. The control algorithm of the simulator was implemented using three parallel running independent control loops, which regulate the forces of individual muscles in the respect DOF and work asynchronously in disparate sequences adapted to specific motions (abduction, flexion/extension and rotation). Three cadaveric specimens were used to evaluate the kinematic and kinetic performance of the simulator during simulated motions. High kinematic accuracy (maximum mean deviation ≤ 2.35° and RMSE 1.13°) and repeatability (maximum and average SD of ≤ 1.21° and 0.67°) were observed in all three rotational DOF investigated. The reliabilities of all individual muscle forces actuated in the simulator during planar and non-planar motions were generally excellent, with the 95% CIs of ICC estimates of > 0.90 for most instances (30/36). A novel shoulder simulator with active muscle simulation was developed and evaluated. Its capability to reproduce kinematics and kinetics in a physiological range for all DOF was systematically evaluated for multiple kinetic and kinematic outcome variables. The presented simulator is a powerful tool for investigating the biomechanics of physiological and pathological shoulder joints and to evaluate various surgical interventions. Acquisition of reliable data in joint kinetics and translational kinematics during active motions is critical to assess shoulder pathologies and appropriate treatments. We provide a unique muscle activated physiologic shoulder simulator, which allows the comprehensive acquisition of joint kinematic and kinetic data during repeated realistic planar and non-planar motions.

The Effect of Feedback and Kinesio Taping on the Correction of Faulty Movement Patterns in Athletes With Lower Limb Injuries

Background and Aims This study addresses only those interventions, such as feedback and kinesio taping, that affect lower limb function in athletes with impaired lower limb movement patterns. Methods This research is a systematic review study that examined all published articles in English about the effect of feedback and kinesio taping on correcting defective movement patterns and reducing injury risk factors. The current study was conducted by searching foreign databases such as Google Scholar, PubMed, and ScienceDirect and domestic databases, including Magiran and Irandoc with the keywords of “videotape augmented feedback,” “taping,” “kinesio taping,” and “lower extremity” from January 2000 to January 2021. Results After reviewing the full texts of 45 articles, 24 articles were finally selected according to the purpose of the research. Of 24 articles, 20 were interventional studies, 1 was a systematic review, 1 was a meta-analysis, and 2 were meta-analysis and systematic reviews. In all studies, feedback training methods positively affected lower limb biomechanics, and tipping methods improved pain. Conclusion After comparing the effects of feedback and kinesio taping interventions in the studied studies, it can be concluded that feedback is better than kinesio taping taping in improving kinetic and kinematic variables in people with lower limb movement pattern defects.