Kinetic Variables Research Articles

Intra-Day and Inter-Day Reliability and Usefulness of Performance, Kinetic and Kinematic Variables during Drop Jumping in Hurling Players

The aim of this study was to estimate the intra-day and inter-day reliability and usefulness of performance (Jump height (JH), ground contact time (GCT) and reactive strength index (RSI)), kinetic (force, power, eccentric rate of force development [E-RFD] and leg stiffness [LS]) and kinematic (velocity) variables during drop jumping (DJ) in hurling players. Seventeen (n = 17; mean ± SD; age = 23.35 ± 5.78 years, height = 178.35 ± 6.30 cm, body mass = 78.62 ± 8.06 kg) male club-level hurling players completed two maximal DJs from 0.20, 0.30, 0.40, 0.50 and 0.60 m drop heights on three testing days separated by 5–9 days of rest. Reliability was assessed using the coefficient of variation percentage (CV% ≤ 15%) and intraclass correlation coefficient (ICC > 0.70). For intra-day reliability, GCT (0.40 m, 0.50 m and 0.60 m), peak force (absolute and relative) (0.40 m and 0.50 m) and leg stiffness (0.40 m and 0.50 m) were found to be unreliable (ICC = 0.32–0.68 and CV% = 3.67–11.83%) from those specific drop heights. All other variables were found to be reliable (ICC = 0.72–0.98 and CV% = 1.07–14.02%) intra-day. All variables were found to be reliable (ICC = 0.72–0.96 and CV% = 2.57–14.68%) inter-day except for relative peak force and absolute and relative eccentric RFD (0.30 m and 0.40 m) (ICC = 0.68–0.90 and CV% = 7.76–16.47%). Practitioners have multiple reliable DJ performance, kinetic and kinematic variables for performance testing and training purposes.

Are inter-limb differences in change of direction velocity and angle associated with inter-limb differences in kinematics and kinetics following anterior cruciate ligament reconstruction?

BackgroundQuantifying inter-limb differences in kinematics and kinetics during change of direction is proposed as a means of monitoring rehabilitation following anterior cruciate ligament reconstruction (ACLR). Velocity and centre of mass (CoM) deflection angle are fundamental task descriptors that influence kinematics and kinetics during change of direction. Inter-limb differences in approach velocity and CoM deflection angle have been identified following ACLR and may contribute to the presence of inter-limb differences in kinematics and kinetics during change of direction. Research questionThe aim of this study was to quantify the proportion of variance in kinematic and kinetic inter-limb differences attributable to inter-limb differences in approach velocity and centre of mass deflection angle during a change of direction task. MethodsA cohort of 192 patients (male, 23.8 ± 3.6 years, 6.3 ± 0.4 months post primary ACLR) completed a pre-planned 90° change of direction task on both their operated and non-operated limb. Inter-limb differences in approach velocity and CoM deflection angle were calculated alongside lower-extremity kinematic and kinetic variables. The relationship between inter-limb differences in task-level variables and inter-limb differences in kinematic and kinetic variables was examined using linear regression models. Kinematic and kinetic inter-limb differences were adjusted for inter-limb differences in approach velocity and CoM deflection angle. Adjusted and unadjusted inter-limb differences were submitted to one sample t-tests. ResultsInter-limb differences in approach velocity and centre of mass deflection angle explained 3 – 60% of the variance in kinematic and kinetic inter-limb differences. Statistical inferences remained consistent between adjusted and unadjusted conditions with the exception of hip flexion angle. SignificanceInter-limb differences in task-level features explain a large proportion of the variance in inter-limb differences in several kinematic and kinetic variables. Accounting for this variation reduced the magnitude of kinematic and kinetic inter-limb differences comparable to those previously observed in normative cohorts.

Gait asymmetry in spatiotemporal and kinetic variables does not increase running-related injury risk in lower limbs: a secondary analysis of a randomised trial including 800+ recreational runners

ObjectiveTo investigate asymmetry in spatiotemporal and kinetic variables in 800+ recreational runners, identify determinants of asymmetry, investigate if asymmetry is related to greater running injury risk and compare spatiotemporal and...

Investigation of a Theoretical Model for the Rotational Shot Put Technique.

The biomechanics of the rotational shot put technique have been demonstrated. However, the causal relationships among kinematics and kinetics for achieving higher release velocity remain poorly understood. This study investigated these causal relationships among biomechanical variables for achieving a higher release velocity in the rotational shot put technique. The study included 22 male shot putters whose 3-dimensional motion was captured during official competitions. Key kinematic and kinetic variables throughout the shot put motion were calculated, as suggested by previous studies. Path analysis was used to explore a hierarchical model that postulates both direct and indirect effects among variables. The findings revealed that the impulse of the shot, system angular momentum, and system linear momentum were critical kinetic variables contributing directly to release velocity. Additionally, 8 kinematic variables significantly affected the impulse of the shot, including shoulder rotation, shot path length, and trunk tilt, while movements such as swings and extensions of the lower extremities were related to system momentum. This model not only provides a detailed understanding of the mechanics involved in the rotational technique but also informs technical coaching strategies in the shot put.

The Influence of Maturity Status on Drop Jump Kinetics in Male Youth

Abstract Kumar, NTA, Radnor, JM, Oliver, JL, Lloyd, RS, CSCSD, Pedley, JS, Wong, MA, and Dobbs, IJ. The influence of maturity status on drop jump kinetics in male youth. J Strength Cond Res 38(1): 38–46, 2024—The aim of this study was to examine the effects of maturity status on drop jump (DJ) kinetics in young male athletes (categorized as early-pre–peak height velocity [PHV] [<−2.51 years], late-pre-PHV [−1.99 to −1.00 years], circa-PHV [−0.50 to 0.50 years], and post-PHV [>1.00 years]). All athletes performed a DJ from a 30-cm box onto force plates with performance variables (jump height, ground contact time, and reactive strength index) and absolute and relative kinetic variables during the braking and propulsive phases assessed. Subjects were categorized into GOOD (no impact-peak and spring-like), MODERATE (impact-peak and spring-like), or POOR (impact-peak and not spring-like) stretch-shortening cycle (SSC) function. The post-PHV group exhibited significantly greater values for most absolute kinetic variables compared with early-pre-PHV, late-pre-PHV, and circa-PHV (p < 0.05). The differences observed between consecutive maturity groups were similar in magnitude for most absolute variables (Cohen's d = 0.53–1.70). Post-PHV male athletes outperform their less mature counterparts during a DJ, and this may be attributed to the growth and maturity-related structural and motor control strategy changes that occur in children. Stretch-shortening cycle function in boys seems to improve with maturity status reflected by a greater number of post-PHV participants displaying GOOD SSC function (65.8%) and a greater number of early-pre-PHV participants displaying POOR SSC function (54.4%). However, a number of mature boys displayed POOR SSC function (17.8%), suggesting that the development of SSC function is not exclusively related to maturation.

Correspondence to Article “Correlation between BMI and Static Biomechanical Lower Extremity Kinetic Chain Variables in Overweight Young Adults: A Cross-sectional Study”

Correspondence to Article “Correlation between BMI and Static Biomechanical Lower Extremity Kinetic Chain Variables in Overweight Young Adults: A Cross-sectional Study”

A focus on exercise prescription and assessment for a safe return to sport participation following a patellar tendon reconstruction in a soccer player

Purpose: The aim of this study was to analyse a 6-month kinesiological intervention after patellar tendon reconstruction. The kinetics, kinematics, and neuromuscular differences between operated (OL) and non-operated limbs (N-OL) were examined over time in a soccer player. Methods: The assessment took place at three months (T0) and nine months (T1) after the reconstruction. This comprised an assessment of the range of motion (ROM), gait analysis through angle-angle diagrams, postural control, neuromuscular assessment during whole-body vibration (WBV), and unilateral-bilateral maximal voluntary isometric contractions (MVICs) synchronised with surface electromyography (sEMG). Results: The angle-angle diagrams at T1 show that the area and perimeter of the N-OL and OL diagrams increased, especially the area and perimeter of the knee-ankle diagram in OL. Furthermore, the postural control at T1 indicated an increase in different conditions. The root mean square (RMS) of sEMGRMS obtained during WBV revealed a significant alteration in the neuromuscular patterns in the OL at T1. The increase in the vastus lateralis (VL) and lateral gastrocnemius (LG) activities was accompanied by a decrease in the biceps femoris (BF) and tibialis anterior (TA). The peak of force and the rate of force development during MVICs showed a slight difference between OL and N-OL at T1. Furthermore, sEMGRMS activity synchronised with MVICs showed a slight difference between the OL and N-OL in the extensors (VL, VM, and RF) and flexors (BF) muscles at T1. Conclusions: The kinetic, kinematic, and neuromuscular variables have shown improvements at T1 compared to T0. Anyway, a 6-month individualised kinesiological intervention, following a patellar tendon reconstruction, reveals that minor alterations in the neuromuscular pattern remain in the OL. These results help kinesiologists manage the functional recovery after patellar tendon reconstruction.

Effect of Archimedes number on the dynamics of free-falling perforated disks

The dynamics of perforated disks falling freely in a large expanse of viscous fluid at rest is investigated numerically. This complex fluid–structure interaction is solved via large eddy simulation. This numerical algorithm is verified and validated with available experimental results. The influence of Archimedes number expressing the ratio between the gravity-buoyancy and viscosity effects is discussed thoroughly, including kinematics and dynamics. Two critical Archimedes numbers are identified, Arcr1≈450 and Arcr2≈950, respectively. At these two critical Archimedes numbers, both kinematic and dynamic variables change trends. In this paper, we focus on the statistics of free-falling perforated disks. With the Archimedes number Ar increasing, the average angle of attack ⟨AoA⟩ and descent velocity ⟨Uz⟩ decrease gradually, and they arrive at a fixed value finally (here, ⟨·⟩ represents a time-average result); On the contrary, the other kinetic variables change violently when Ar is around 900, for example, terminal velocity ⟨Ut⟩. Additionally, phase differences of kinematic and dynamic variables are analyzed. A constant phase difference between the nutation angle θ and normal force FN is identified, about 66°, which is independent of Ar. Vortex structures are visualized using Q-criterion, and triangular vortex is omnipresent around holes. During the descent, a helical vortex always attaches to the perforated disk outer edge. With Ar increasing, complex vortex interaction appears, for example, merging and stretching. Some unusual behaviors in the numerical results are analyzed from the perspective of wake dynamics.

Impact of Injury Prevention Video Feedback on Biomechanical Variables of the Knee Joint during Cutting Maneuver

PURPOSE This study aims to analyze the effects of injury prevention video feedback on kinetic variables of the knee joint during the cutting maneuver.METHODS Twenty-eight healthy men participated and motion and force data were collected using infrared cameras, a force plate, and a Witty timing system. Paired t-tests were employed for data evaluation using the SPSS 26.0 program.RESULTS Results showed increased abduction and lateral rotation angles of the knee joint at the lower height of the center of mass (COM) (p<. 05). The lateral rotation of the knee joint decreased at initial ground contact (p<.05). Flexion angular velocity increased at initial ground contact after video feedback (p<.05) and decreased at the lower height of COM (p<.05). Abduction angular velocity decreased at the lower height of COM (p<.05), and internal rotation angular velocity was increased on the initial ground contact (p<.05). Maximum ground reaction force for anterior-posterior and medial-lateral directions increased after video feedback (p<.05). Flexion and internal rotation moments increased, and adduction moment also increased (p<.05).CONCLUSIONS In conclusion , video feedback effectively reduced knee load during the cutting maneuver, contributing to injury prevention for the knee joint.

Use of Bayesian Methods in the Process of Uranium Bioleaching by Acidithiobacillus ferrooxidans

This research is focused on investigating the utilization of Bayesian methodologies, specifically the Markov Chain Monte Carlo method, as well as filter sampling by importance and sequential resampling. The objective is to estimate kinetic parameters and state variables associated with the uranium bioleaching process by Acidithiobacillus ferrooxidans. Experimental data of cell concentration, uranium concentration, and concentrations of ferrous and ferric ions, obtained from literature, were employed. These measurements were evaluated using a mathematical model expressed by a system of ordinary differential equations. Three different mathematical models were evaluated, considering different uncertainties in experimental measurements and mathematical models (1% and 5%). The estimation results presented a good fit to the experimental data, with coefficients of determination in the range of 0.95 to 0.99. The validation of the mathematical models was obtained by reproducing the experimental measurements and the Bayesian techniques proved to be suitable for application in the bioleaching process.

Another normality is possible. Distributive transformations and emergent Gaussianity

A distributional route to Gaussianity, associated with the concept of Conservative Mixing Transformations (CMT) in ensembles of random vector-valued variables, is proposed. This route is completely different from the additive mechanism characterizing the application of Central Limit Theorem, as it is based on the iteration of a random transformation preserving the ensemble variance. Gaussianity emerges as a “supergeneric” property of ensemble statistics, in the case the energy constraint is quadratic in the norm of the variables. This result puts in a different light the occurrence of equilibrium Gaussian distributions in kinetic variables (velocity, momentum), as it shows mathematically that, in the absence of any other dynamic mechanisms, almost Gaussian distributions stem from the low-velocity approximations of the physical conservation principles. Whenever, the energy constraint is not expressed in terms of quadratic functions non-Gaussian distributions arise. This is case of relativistic collisional interactions where the Jüttner distribution is recovered from CMT.

Energy-Conserving and Thermally Corrected Neglect of Back-Reaction Approximation Method for Nonadiabatic Molecular Dynamics.

In this work, the energy-conserving and thermally corrected neglect of the back-reaction approximation approach for nonadiabatic molecular dynamics in extended atomistic systems is developed. The new approach introduces three key corrections to the original method: (1) it enforces the total energy conservation, (2) it introduces an explicit coupling of the system to its environment, and (3) it introduces a renormalization of nonadiabatic couplings to account for a difference between the instantaneous nuclear kinetic energy and the kinetic energy of guiding trajectories. In the new approach, an auxiliary kinetic energy variable is introduced as an independent dynamical variable. The new approach produces nonzero equilibrium populations, whereas the original neglect of the back-reaction approximation method does not. It yields population relaxation time scales that are favorably comparable to the reference values, and it introduces an explicit and controllable way of dissipating energy into a bath without an assumption of the bath being at equilibrium.

A novel Eulerian model based on central moments to simulate age and reactivity continua interacting with mixing processes

Abstract. In geoscientific models, simulating the properties associated with particles in a continuum can serve many scientific purposes, and this has commonly been addressed using Lagrangian models. As an alternative approach, we present an Eulerian method here: diffusion–advection–reaction type partial differential equations are derived for centralized moments, which can describe the distribution of properties associated with chemicals in reaction–transport models. When the property is age, the equations for centralized moments (unlike non-central moments) do not require terms to account for aging, making this method suitable for modeling age tracers. The properties described by the distributions may also represent kinetic variables affecting reaction rates. In practical applications, continuous distributions of ages and reactivities are resolved to simulate organic matter mineralization in surficial sediments, where macrofaunal and physical mixing processes typically dominate transport. In test simulations, mixing emerged as the predominant factor shaping reactivity and age distributions. Furthermore, the applications showcase the method's aptitude for modeling continua in mixed environments while also highlighting practical considerations and challenges.

Upper extremity effort during the sit-to-stand task in able-bodied and in individuals with spinal cord injury: A preliminary study

Objective To investigate the association between the presence of spinal cord injury (SCI) on biomechanical variables by comparing individuals with SCI and able-bodied individuals during the sit-to-stand (STS) task assisted by a walker device. Specifically, we compared the upper-extremity joint angles and moments, trunk forward tilt angle, vertical forces of the instrumented walker, and ground reaction forces between groups. Design Case–control study. Setting Department of Orthopedics and Traumatology, UNICAMP-Brazil. Participants Six individuals with SCI and fourteen able-bodied individuals. Main outcome measures Kinematics and kinetics of the shoulder, elbow, and wrist joints; trunk forward tilt angle, vertical walker forces, and ground reaction forces (GRF) were analyzed during the STS task in two phases: before and after the seat-off event. Results A higher peak elbow flexion angle and higher vertical walker forces were observed before the seat-off, whereas the lower peak vertical GRF was found, after the seat-off, in the SCI group compared with the control group. Conclusions SCI affects kinematics and kinetics variables during the STS task compared to able-bodied controls. Individuals with SCI adopted different standing-up strategies that affected the distribution of the forces in the upper and lower extremities of the human body.

Acute effects of robot-assisted body weight unloading on biomechanical movement patterns during overground walking

Body weight unloading (BWU) is used in rehabilitation/training settings to reduce kinetic requirements, however different BWU methods may be unequally capable of preserving biomechanical movement patterns. Biomechanical analysis of both kinetic and kinematic movement trajectories rather than discrete variables has not previously been performed to describe the effect of BWU on gait patterns during horizontal walking. The aim of the present study was to investigate how robot-assisted BWU producing an dynamic unloading force on the body centre of mass, affects kinematic, kinetic, and spatiotemporal gait parameters in healthy young adults by use of time-continuous analysis. Twenty participants walked overground in a 3-D motion-capture lab at 0, 10, 20, 30, 40, and 50 % BWU at a self-selected speed. Vertical and anterior-posterior ground reaction forces (GRFs) and lower limb internal joint moments were obtained during the stance phase, while joint angles were obtained during entire strides. Time-continuous data were analysed using Statistical Parametric Mapping (SPM) and discrete data using conventional statistics to compare different BWU conditions by means of One-Way Repeated Measures Anova. With increasing BWU, corresponding reductions were observed for GRFs, internal joint moments, joint angles, walking speed, stride/step length and cadence. Observed effects were partially caused by decreased walking speed and increased BWU. While amplitude reductions were observed for kinetic and kinematic variables, trajectory shapes were largely preserved. In conclusion, dynamic robot-assisted BWU enables reduced kinetic requirements without distorting biomechanically normal gait patterns during overground walking in young healthy adults.

Model development for numerical analysis of the bonding strength for friction welded lightweight structures

The rotary friction welding (RFW) is a robust, precise, productive and economical joining process that is used in many areas of mechanical engineering to produce lightweight structures consisting of combinations of ferrous and non-ferrous materials, for instance aluminium alloy and steel. Crucial for the design of such lightweight structures is the knowledge about the bonding strength. The bonding strength is the result of the bond formation depending on the present transient kinematic, kinetic and thermal states during the welding process being directly determined by the welding process parameters. Despite several years of empirical research, no reliable numerical modelling approach exists for the RFW process to analyse the bonding strength based on these transient state variables. For this reason, an improvement of the bond formation and therefore an increase in the bonding strength can only be tested experimentally. The main motivation of this paper is to develop an appropriate modelling approach for the estimation of the bonding strength for friction welded lightweight structures manufactured of an aluminium alloy and a structural steel. Therefore, a couple of aluminium alloy and steel welding experiments with different process parameters were performed and subsequently analysed concerning to the resulting bonding strength. Moreover, all the welding experiments were simulated in regard to the corresponding welding process in order to determine the present kinematic, kinetic and thermal state variables, like the strain rate, the stress and the temperature. Thus, a model for the characterization of the bond formation can be developed, which allows a correlation between the bond formation and the resulting bond strength based on the chosen welding process parameters. Finally, the model will be examined and discussed in terms of its plausibility and applicability.

Evaluation of Kinematic and Kinetic Variables After Knee Joint Surgery Before and After 8 Weeks of Individual Training (Case Study)

Evaluation of Kinematic and Kinetic Variables After Knee Joint Surgery Before and After 8 Weeks of Individual Training (Case Study)

Acute Effect of Dynamic and Gluteal Resistance Exercise Warm-up Protocols on Jump Landing Mechanics in College-Aged Females.

Rauseo, ML, Feairheller, DL, LaRoche, DP, and Cook, SB. Acute effect of dynamic and gluteal resistance exercise warm-up protocols on lower-extremity jump landing mechanics in college-aged females. J Strength Cond Res 38(2): 259-265, 2024-Inadequate neuromuscular control of the femur by the gluteal musculature is associated with noncontact and overuse injuries to the knee. Acute bouts of resistance exercises targeting the gluteal musculature can be prescribed as part of a warm-up protocol with the goal of improving subsequent neuromuscular control and performance. The purpose of this study was to determine the effect that a warm-up protocol including moderate-intensity gluteal resistance exercises (GRE) has on single leg jump landing biomechanics. Seventeen healthy, college-aged, recreationally active females (mean ± SD ; age = 21.4 ± 1.9 years; height = 166.9 ± 5.7 cm; body mass = 62.5 ± 7.4 kg) performed 3 single leg hop trials per leg after completing no warm-up (CON), a dynamic warm-up (DWU), and a dynamic warm-up with gluteal resistance exercises (DWU + GRE) across 3 laboratory visits. Lower extremity kinetic and kinematic variables were assessed during single leg hops from the point of initial foot contact to deepest knee flexion. Biomechanical differences between dominant and nondominant limb landings were also assessed. Dominant limb hip internal rotation angle after DWU + GRE (2.03 ± 9.92°) was significantly greater ( p ≤ 0.05) compared with CON (-3.36 ± 7.74°). Peak knee adduction moment (56.8%), peak knee flexion angle (5.7%), and peak knee external rotation angle (17.0%) were significantly greater ( p ≤ 0.017) in the dominant limb, compared with the nondominant limb, across warm-up protocols. The combined DWU + GRE warm-up protocol did not have a substantial impact on landing biomechanics. Clinicians prescribing GRE before activity should not expect significant changes in movement patterns after a single bout.

Reference Values and Determinants of Spatiotemporal and Kinetic Variables in Recreational Runners.

Identifying atypical lower limb biomechanics may help prevent the occurrence or recurrence of running-related injuries. No reference values for spatiotemporal or kinetic variables in healthy recreational runners are available in the scientific literature to support clinical management. To (1) present speed- and sex-stratified reference values for spatiotemporal and kinetic variables in healthy adult recreational runners; (2) identify the determinants of these biomechanical variables; and (3) develop reference regression equations that can be used as a guide in a clinical context. Descriptive laboratory study. This study involved 860 healthy recreational runners (age, 19-65 years [38.5% women]) tested on an instrumented treadmill at their preferred running speed in randomly allocated, standardized running shoes with either hard or soft cushioning. Twelve common spatiotemporal and kinetic variables-including contact time, flight time, duty factor, vertical oscillation, step cadence, step length, vertical impact peak (VIP), time to VIP, vertical average loading rate, vertical stiffness, peak vertical ground-reaction force (GRF), and peak braking force-were derived from GRF recordings. Reference values for each biomechanical variable were calculated using descriptive statistics and stratified by sex and running speed category (≤7, 8, 9, 10, 11, 12, 13, 14, and ≥15 km/h). Correlations and multiple regression analyses were performed to identify potential determinants independently associated with each biomechanical variable and generate reference equations. The mean running speed was 10.5 ± 1.3 km/h and 9 ± 1.1 km/h in men and women, respectively. While all potential predictors were significantly correlated with many of the 12 biomechanical variables, only running speed showed high correlations (r > 0.7). The adjusted R2 of the multiple regression equations ranged from 0.19 to 0.88. This study provides reference values and equations that may guide clinicians and researchers in interpreting spatiotemporal and kinetic variables in recreational runners. The reference values can be used as targets for clinicians working with recreational runners in cases where there is a clinical suspicion of a causal relationship between atypical biomechanics and running-related injury.

Changes in Running Kinematics and Kinetics Following a 10 km Run.

Little is known about changes in kinetics or kinematics following a 10 km training run. This information has implications on risk of running-related injury. The purpose of this study was to examine the effect of a 10 km run on running kinematics and kinetics in a sample of experienced runners. Cross-Sectional Study. Nineteen runners ages 18-48 (7 female, 12 male) consented to participate including eight (3 female, 5 male) ultra-runners, and 11 (4 female, 7 male) recreational runners. Following collection of demographic data and completion of a short running survey, participants did a 6-minute run at their self-selected running speed to acclimate to the instrumented treadmill. Reflective markers were placed over designated anatomical landmarks on both sides of the pelvis as well as the left lower extremity and marked with a skin pen. Subjects then ran on the treadmill and 30 seconds of video data were recorded at 240 frames/sec using a high-speed camera for the sagittal plane and the frontal plane. Simultaneously, ground reaction forces (GRFs) were recorded at 1200 Hz through the treadmill's embedded force plates. Each runner then ran 10 km on a paved trail at their self-selected pace. Immediately following the run, reflective markers were reattached, guided by markings placed before the run, and a 30-second post-run trial of the video and GRF data were recorded. Video data were analyzed using Kinovea software to measure the kinematic variables of interest. Paired t-tests with Bonferroni corrections were used to find if significant differences existed between pre- and post-run data for all kinematic and kinetic variables. No significant or clinically relevant differences existed between the pre- and post-run measurements for the kinematic or kinetic variables. The only significant difference noted between the ultra-runners and recreational runners was that the ultra-runners had significantly higher cadence (p=0.045). A 10 km run at a self-selected pace did not result in change in the mean kinematic or kinetic variables in this group of experienced runners. Ultra-runners employ higher cadence than recreational runners, but their kinematics and kinetics are similar. Level 3.