Kinetic Isotope Effect Values Research Articles

Trajectory-Based Time-Resolved Mechanism for Benzene Reductive Elimination from Cyclopentadienyl Mo/W Phenyl Hydride Complexes.

Calculated potential energy structures and landscapes are very often used to define the sequence of reaction steps in an organometallic reaction mechanism and interpret kinetic isotope effect (KIE) measurements. Underlying most of this structure-to-mechanism translation is the use of statistical rate theories without consideration of atomic/molecular motion. Here we report direct dynamics simulations for an organometallic benzene reductive elimination reaction, where nonstatistical intermediates and dynamic-controlled pathways were identified. Specifically, we report single spin state as well as mixed spin state quasiclassical direct dynamics trajectories in the gas phase and explicit solvent for benzene reductive elimination from Mo and W bridged cyclopentadienyl phenyl hydride complexes ([Me2Si(C5Me4)2]M(H)(Ph), M = Mo and W). Different from the energy landscape mechanistic sequence, the dynamics trajectories revealed that after the benzene C-H bond forming transition state (often called reductive coupling), σ-coordination and π-coordination intermediates are either skipped or circumvented and that there is a direct pathway to forming a spin flipped solvent caged intermediate, which occurs in just a few hundred femtoseconds. Classical molecular dynamics simulations were then used to estimate the lifetime of the caged intermediate, which is between 200 and 400 picoseconds. This indicates that when the η2-π-coordination intermediate is formed, it occurs only after the first formation of the solvent-caged intermediate. This dynamic mechanism intriguingly suggests the possibility that the solvent-caged intermediate rather than a coordination intermediate is responsible (or partially responsible) for the inverse KIE value experimentally measured for W. Additionally, this dynamic mechanism prompted us to calculate the kH/kD KIE value for the C-H bonding forming transition states of Mo and W. Surprisingly, Mo gave a normal value, while W gave an inverse value, albeit small, due to a much later transition state position.

Oxygenolytic cleavage of 1,2-diols with dioxygen by a mononuclear nonheme iron complex: Mimicking the reaction of myo-inositol oxygenase

A mononuclear iron(II) complex, [(TpPh2)FeII(OTf)(CH3CN)] (1) (TpPh2 = hydrotris(3,5-diphenylpyrazol-1-yl)borate, OTf = triflate) has been isolated and its efficiency toward the aliphatic CC bond cleavage reaction of 1,2-diols with dioxygen has been investigated. Separate reactions between 1 and different 1,2-diolates form the corresponding iron(II)-diolate complexes in solution. While the iron(II) complex of the tetradentate TPA (tris(2-pyridylmethyl)amine) ligand is not efficient in affecting the CC cleavage of 1,2-diol with dioxygen, complex 1 displays catalytic activity to afford carboxylic acid and aldehyde. Isotope labeling studies with 18O2 reveal that one oxygen atom from dioxygen is incorporated into the carboxylic acid product. The oxygenative CC cleavage reactions occur on the 1,2-diols containing at least one α-H atom. The kinetic isotope effect value of 5.7 supports the abstraction of an α-H by an iron(III)-superoxo species to propagate the CC cleavage reactions. The oxidative cleavage of 1,2-diolates by the iron(II) complex mimics the reaction catalyzed by the nonheme diiron enzyme, myo-inositol oxygenase.

RuCo@P Core-Shell Nanoparticles Filled with Carbon Nanotubes for Highly Effective Catalytic Hydrolysis of Ammonia Borane

The doping of nonmetals in multiphase metal catalysts can effectively improve the catalytic performance and reduce the catalyst cost. In this study, we synthesized transition metal phosphide (RuCo@P/CNT) catalysts loaded on carbon nanotubes (CNT) using sodium borohydride (NaBH4) as the reducing agent. The microstructure and phase composition of RuCo@P/CNT nanoparticles were investigated using X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), transmission electron microscopy (TEM), and BET. RuCo@P/CNT nanoparticles show superior catalytic activity and cycle stability in the catalytic ammonia borane hydrolysis process compared to Ru/CNT and RuCo/CNT nanoparticles, retaining 65.74% of their initial catalytic activity after 5 reaction cycles. The test yielded values for turnover frequency and activation energy of 327.33 min-1 and 36.77 kJ·mol-1, respectively. Additionally, a kinetic isotope effect value of 2.61 for H2O/D2O showed that O-H bond breaking in proportional acceptor water is the decisive step in the dehydrogenation of ammonia borane, and based on this discovery, a specific mechanism for the catalytic hydrolysis of AB by RuCo@P NPs is postulated.

Catalytic Dehydrogenation of Formic Acid Promoted by Triphos-Co Complexes: Two Competing Pathways for H2 Production.

In this study, we reported the synthesis and structural characterization of a triphos-CoII complex [(κ3-triphos)CoII(CH3CN)2]2+ (1) and a triphos-CoI-H complex [(κ2-triphos)HCoI(CO)2] (4). The facile synthetic pathways from 1 to [(κ3-triphos)CoII(κ2-O2CH)]+ (1') and [(κ3-triphos)CoI(CH3CN)]+ (2), respectively, as well as the interconversion between [(κ3-triphos)CoI(CO)2]+ (3) and 4 have been established. The activation energy barrier, associated with the dehydrogenation of a coordinated formate fragment in 1' yielding the corresponding 2 accompanied by the formation of H2 and CO2, was experimentally determined as 23.9 kcal/mol. With 0.01 mol % loading of 1, a maximum TON ∼ 1735 within 18 h and TOF ∼ 483 h-1 for the first 3 h could be achieved. Kinetic isotope effect (KIE) values of 2.25 (kHCOOH/kDCOOH) and 1.36 (kHCOOH/kHCOOD) for the dehydrogenation of formic acid and its deuterated derivatives, respectively, implicate that the H-COOH bond cleavage is likely the rate-determining step. The catalytic mechanism proposed by density functional theory (DFT) calculations coupled with experimental 1H NMR and gas chromatography-mass spectrometry (GC-MS) analysis unveils two competing pathways for H2 production; specifically, deprotonating a HCOO-H bond by a proposed Co-H intermediate C and homolytic cleavage of the CoII-H moiety of C, presumably via a dimeric Co intermediate D containing a [Co2(μ-H)2]2+ core, to yield the corresponding 2 and H2.

Rapid Thalidomide Racemization Is Related to Proton Tunneling Reactions via Water Bridges.

Quantum mechanical tunneling (QMT) can play an important role in light element-related chemical reactions; however, its influence on racemization is not fully understood. Herein, we demonstrate that the role of QMT is decisive for rapid racemization of the well-known thalidomide molecule in aqueous environments, increasing the reaction rate constants of the most likely racemization pathways by 87-149 times at approximately body temperature and achieving good agreement between theoretical calculations and experimental observations. In addition, the kinetic isotope effect values fit well with those of previous experiments. These results are attributed to enhanced tunneling probability due to the alteration of potential barriers for proton transfer reactions via water bridges. This work highlights the significance of the QMT effect in racemization and its potential impact on drug safety, providing a fundamental perspective for understanding chirality-related issues in biological systems.

Transition from Sequential to Concerted Proton-Coupled Electron Transfer of Water Oxidation on Semiconductor Photoanodes.

Accelerating proton transfer has been demonstrated as key to boosting water oxidation on semiconductor photoanodes. Herein, we study proton-coupled electron transfer (PCET) of water oxidation on five typical photoanodes [i.e., α-Fe2O3, BiVO4, TiO2, plasmonic Au/TiO2, and nickel-iron oxyhydroxide (Ni1-xFexOOH)-modified silicon (Si)] by combining the rate law analysis of H2O molecules with the H/D kinetic isotope effect (KIE) and operando spectroscopic studies. An unexpected and universal half-order kinetics is observed for the rate law analysis of H2O, referring to a sequential proton-electron transfer pathway, which is the rate-limiting factor that causes the sluggish water oxidation performance. Surface modification of the Ni1-xFexOOH electrocatalyst is observed to break this limitation and exhibits a normal first-order kinetics accompanied by much enhanced H/D KIE values, facilitating the turnover frequency of water oxidation by 1 order of magnitude. It is the first time that Ni1-xFexOOH is found to be a PCET modulator. The rate law analysis illustrates an effective strategy for modulating PCET kinetics of water oxidation on semiconductor surfaces.

Experimental Evidence and Mechanistic Description of the Phenolic H-Transfer to the Cu2O2 Active Site of oxy-Tyrosinase.

Tyrosinase is a ubiquitous coupled binuclear copper enzyme that activates O2 toward the regioselective monooxygenation of monophenols to catechols via a mechanism that remains only partially defined. Here, we present new mechanistic insights into the initial steps of this monooxygenation reaction by employing a pre-steady-state, stopped-flow kinetics approach that allows for the direct measurement of the monooxygenation rates for a series of para-substituted monophenols by oxy-tyrosinase. The obtained biphasic Hammett plot and the associated solvent kinetic isotope effect values provide direct evidence for an initial H-transfer from the protonated phenolic substrate to the Cu2O2 core of oxy-tyrosinase. The correlation of these experimental results to quantum mechanics/molecular mechanics calculations provides a detailed mechanistic description of this H-transfer step. These new mechanistic insights revise and expand our fundamental understanding of Cu2O2 active sites in biology.

Kinetics of the Simplest Criegee Intermediate Reaction with Water Vapor: Revisit and Isotope Effect.

The kinetics of the simplest Criegee intermediate (CH2OO) reaction with water vapor was revisited. By improving the signal-to-noise ratio and the precision of water concentration, we found that the kinetics of CH2OO involves not only two water molecules but also one and three water molecules. Our experimental results suggest that the decay of CH2OO can be described as d[CH2OO]/dt = -kobs[CH2OO]; kobs = k0 + k1[water] + k2[water]2 + k3[water]3; k1 = (4.22 ± 0.48) × 10-16 cm3 s-1, k2 = (10.66 ± 0.83) × 10-33 cm6 s-1, k3 = (1.48 ± 0.17) × 10-50 cm9 s-1 at 298 K and 300 Torr with the respective Arrhenius activation energies of Ea1 = 1.8 ± 1.1 kcal mol-1, Ea2 = -11.1 ± 2.1 kcal mol-1, Ea3 = -17.4 ± 3.9 kcal mol-1. The contribution of the k3[water]3 term becomes less significant at higher temperatures around 345 K, but it is not ignorable at 298 K and lower temperatures. By quantifying the concentrations of H2O and D2O with a Coriolis-type direct mass flow sensor, the kinetic isotope effect (KIE) was investigated at 298 K and 300 Torr and KIE(k1) = k1(H2O)/k1(D2O) = 1.30 ± 0.32; similarly, KIE(k2) = 2.25 ± 0.44 and KIE(k3) = 0.99 ± 0.13. These mild KIE values are consistent with theoretical calculations based on the variational transition state theory, confirming that the title reaction has a broad and low barrier, and the reaction coordinate involves not only the motion of a hydrogen atom but also that of an oxygen atom. Comparing the results recorded under 300 Torr (N2 buffer gas) with those under 600 Torr, a weak pressure effect of k3 was found. From quantum chemistry calculations, we found that the CH2OO + 3H2O reaction is dominated by the reaction pathways involving a ring structure consisting of two water molecules, which facilitate the hydrogen atom transfer, while the third water molecule is hydrogen-bonded outside the ring. Furthermore, analysis based on dipole capture rates showed that the CH2OO(H2O) + (H2O)2 and CH2OO(H2O)2 + H2O pathways will dominate in the three water reaction.

Microenvironment regulation of Ru(bda)L2 catalyst incorporated in metal-organic framework for effective photo-driven water oxidation

A Ru(bda)L2 molecular catalyst (H2bda = 2,2′-bipyridine-6,6′-dicarboxylic acid, L represents ligands) was incorporated into a UiO-66 metal-organic framework (MOF) as isolating sites for chemical- and photo-driven water oxidation with the water nucleophilic attack mechanism. An impressive turn-over number of 566 was obtained for photo-driven water oxidation in the phosphate buffer saline, which was nearly 20 times that of the homogenous counterpart in the presence of ruthenium tris(bipyridine) and sodium persulfate. Infrared spectroscopy, X-ray diffraction and X-ray spectroscopy techniques were used to characterize the composition and structure of the catalysts. Kinetic isotope effect (KIE), proton inventory experiment and proton nuclear magnetic resonance were conducted to understand the photo-driven O2 evolution mechanism. It was observed that the protons participated in O2 evolution with a normal KIE value, and the uptake of phosphates by UiO-66 matrix improved the affinity towards H2O via hydrogen bonding. The high O2 output and the limited photosensitizer oxidative decomposition in PBS suggest that the phosphate acted as a proton mediator to assist proton and/or proton-couple electron transfer through a hydrogen-bonded network of water molecules. This study uses a heterogenous matrix to emulate an enzyme-like microenvironment capable of achieving efficient artificial photosynthesis.

Estimation of frequency factors for the calculation of kinetic isotope effects from classical and path integral free energy simulations.

We use the modified Bigeleisen-Mayer equation to compute kinetic isotope effect values for non-enzymatic phosphoryl transfer reactions from classical and path integral molecular dynamics umbrella sampling. The modified form of the Bigeleisen-Mayer equation consists of a ratio of imaginary mode vibrational frequencies and a contribution arising from the isotopic substitution's effect on the activation free energy, which can be computed from path integral simulation. In the present study, we describe a practical method for estimating the frequency ratio correction directly from umbrella sampling in a manner that does not require normal mode analysis of many geometry optimized structures. Instead, the method relates the frequency ratio to the change in the mass weighted coordinate representation of the minimum free energy path at the transition state induced by isotopic substitution. The method is applied to the calculation of 16/18O and 32/34S primary kinetic isotope effect values for six non-enzymatic phosphoryl transfer reactions. We demonstrate that the results are consistent with the analysis of geometry optimized transition state ensembles using the traditional Bigeleisen-Mayer equation. The method thus presents a new practical tool to enable facile calculation of kinetic isotope effect values for complex chemical reactions in the condensed phase.

Stepwise photoassisted decomposition of carbohydrates to H2

Stepwise photoassisted decomposition of carbohydrates to H2

Isotopic (D/H) management of chemical and biological processes properties: applications in pharmaceutical engineering

The strategy of sustainable industrial development in accordance with “green chemistry” stimulates researchers to search for a “lever” that could provide control over the direction and speed of chemical and biological processes. Water, depleted in deuterium content, is a recognized safe (in contrast to D2O) dissolution medium according to the results of numerous clinical observations. Due to the lower strength of carbon-protium (C-H) chemical bonds compared to carbon-deuterium (C - D), the properties of deuterated compounds, such as the rate of reactions involving them, change. The aim of the work was to study the effect of varying the 21H content on controlling the chemical and biological properties of processes. The highest values of kinetic deuterium isotope effects (KEI), which demonstrated greater sensitivity to the difference in the nucleolar mass D/H in the dissolution medium, correspond to slightly soluble lipophilic molecules. We also found the dependence of the S.ambigua cell biosensor lifetime on the deuterium concentration in the dissolution medium according to the laws of Arrhenius kinetics. Thus, the developed approach based on the laser diffraction technique in controlling the rate of chemical and biological processes can be successfully applied at all stages of the production cycle in the chemical and pharmaceutical industry.

Theoretical Simulations of Kinetic Isotope Effects on Decarboxylation of 3-Carboxybenzisoxazole.

Kinetic isotope effect values on the decarboxylation of 3-carboxybenzisoxazole have been computed using the second-order Kleinert's variational perturbation theory in the framework of Feynman's path integrals along with the potential energy surface obtained at the MP2/6-31+G(d) level. Good agreement with the experimental data was obtained, demonstrating that this novel computational approach for computing KIE values of organic reaction is a viable alternative to the traditional method employing the Bigeleisen equation and harmonic vibrational frequencies. Compared with the experimental measurements, consideration of anharmonicity and tunneling effects can significantly improve the calculated KIE values, reducing the root-mean-square deviation from 1.19 % for traditional method to 0.20 % for path-integral method.

Aliphatic and Aromatic C–H Bond Oxidation by High-Valent Manganese(IV)-Hydroxo Species

The strong C-H bond activation of hydrocarbons is a difficult reaction in environmental and biological chemistry. Herein, a high-valent manganese(IV)-hydroxo complex, [MnIV(CHDAP-O)(OH)]2+ (2), was synthesized and characterized by various physicochemical measurements, such as ultraviolet-visible (UV-vis), electrospray ionization-mass spectrometry (ESI-MS), electron paramagnetic resonance (EPR), and helium-tagging infrared photodissociation (IRPD) methods. The one-electron reduction potential (Ered) of 2 was determined to be 0.93 V vs SCE by redox titration. 2 is formed via a transient green species assigned to a manganese(IV)-bis(hydroxo) complex, [MnIV(CHDAP)(OH)2]2+ (2'), which performs intramolecular aliphatic C-H bond activation. The kinetic isotope effect (KIE) value of 4.8 in the intramolecular oxidation was observed, which indicates that the C-H bond activation occurs via rate-determining hydrogen atom abstraction. Further, complex 2 can activate the C-H bonds of aromatic compounds, anthracene and its derivatives, under mild conditions. The KIE value of 1.0 was obtained in the oxidation of anthracene. The rate constant (ket) of electron transfer (ET) from N,N'-dimethylaniline derivatives to 2 is fitted by Marcus theory of electron transfer to afford the reorganization energy of ET (λ = 1.59 eV). The driving force dependence of log ket for oxidation of anthracene derivatives by 2 is well evaluated by Marcus theory of electron transfer. Detailed kinetic studies, including the KIE value and Marcus theory of outer-sphere electron transfer, imply that the mechanism of aromatic C-H bond hydroxylation by 2 proceeds via the rate-determining electron-transfer pathway.

Probing the Free Energy Landscape of Organophotoredox-Catalyzed Anti-Markovnikov Hydrofunctionalization of Alkenes.

Experimental 13C kinetic isotope effects (KIEs) provide unprecedented mechanistic insight into three intermolecular anti-Markovnikov alkene hydrofunctionalization reactions─hydroesterification, hydroamination, and hydroetherification─enabled by organophotoredox catalysis. All three reactions are found to proceed via initial oxidation of the model alkenes to form a radical cation intermediate, followed by sequential nucleophilic attack and hydrogen-atom transfer to deliver the hydrofunctionalized product. A normal 13C KIE on the olefinic carbon that undergoes nucleophilic attack provides qualitative evidence for rate-limiting nucleophilic attack in all three reactions. Comparison to predicted 13C KIE values obtained from density functional theory (DFT) calculations for this step reveals that alkene oxidation has partial rate-limiting influence in hydroesterification and hydroamination, while the nucleophilic attack is solely rate-limiting in the hydroetherification reaction. The basic additive (2,6-lutidine) activates the nucleophile via deprotonation and is an integral part of the transition state for nucleophilic attack on the radical cation, providing an important design principle for the development of asymmetric versions of these reactions. A more electron-rich pyridine base (2,6-dimethoxypyridine) exhibits considerable rate enhancements in both inter- and intramolecular hydrofunctionalization reactions.

Identification of a cobalt(IV)–oxo intermediate as an active oxidant in catalytic oxidation reactions

AbstractWe report the catalytic oxidation of organic substrates by a cobalt complex, [CoIII(TAML)]− (TAML = tetra‐amido macrocyclic ligand), and meta‐chloroperbenzoic acid (m‐CPBA) under the mild reaction conditions and the identification of a cobalt(IV)–oxo intermediate, [CoIV(TAML)(O)]2−, as an active oxidant in the catalytic oxidation reactions. In the hydroxylation of cyclohexane, cyclohexanol is the sole product and the hydroxylation reaction occurs via an oxygen non‐rebound mechanism. Kinetic isotope effect value of 3.1, obtained in the oxidation of cyclohexane‐h12/d12, indicates that a hydrogen atom abstraction from cyclohexane by the cobalt(IV)–oxo complex is the rate‐determining step. The catalytic oxidation of cyclohexene prefers the C═C bond epoxidation to the C–H bond activation, yielding cyclohexene oxide as a sole product. In the epoxidation of cis‐ and trans‐stilbenes, cis‐ and trans‐stilbene oxides, respectively, are yielded stereoselectively. The present study reports a highly selective catalytic oxidation of organic substrates by a cobalt complex and m‐CPBA and the involvement of a cobalt(IV)–oxo intermediate as an active oxidant in the catalytic oxidation reactions.

Efficient Oxygen Evolution Reaction on Polyethylene Glycol-Modified BiVO4 Photoanode by Speeding up Proton Transfer.

The rate-determining step of the oxygen evolution reaction based on a semiconductor photoanode is the formation of the OO bond. Herein, polyethylene glycol (PEG)-modified BiVO4 photoanodes are reported, in which protons can be transferred quickly due to the high proton conductivity of PEG, resulting in the acceleration of the OO bond formation rate. These are fully demonstrated by different kinetic isotope effect values. Moreover, the open-circuit voltage (Uoc ) further illustrates that PEG passivates the surface states and surface charge recombination is reduced. The composite photoanode can achieve a maximum photocurrent density of 3.64 mA cm-2 at 1.23 V compared to 1.04 mA cm-2 for pure BiVO4 , and an onset potential of 170 mV, which is a 230 mV negative shift compared to pure BiVO4 . This work provides a new strategy to accelerate water oxidation kinetics for photoanodes by speeding up the transfer of the proton and the OO bond formation rate.

New Insights and Predictions into Complex Homogeneous Reactions Enabled by Computational Chemistry in Synergy with Experiments: Isotopes and Mechanisms

ConspectusHomogeneous catalysis and biocatalysis have been widely applied in synthetic, medicinal, and energy chemistry as well as synthetic biology. Driven by developments of new computational chemistry methods and better computer hardware, computational chemistry has become an essentially indispensable mechanistic "instrument" to help understand structures and decipher reaction mechanisms in catalysis. In addition, synergy between computational and experimental chemistry deepens our mechanistic understanding, which further promotes the rational design of new catalysts. In this Account, we summarize new or deeper mechanistic insights (including isotope, dispersion, and dynamical effects) into several complex homogeneous reactions from our systematic computational studies along with subsequent experimental studies by different groups. Apart from uncovering new mechanisms in some reactions, a few computational predictions (such as excited-state heavy-atom tunneling, steric-controlled enantioswitching, and a new geminal addition mechanism) based on our mechanistic insights were further verified by ensuing experiments.The Zimmerman group developed a photoinduced triplet di-π-methane rearrangement to form cyclopropane derivatives. Recently, our computational study predicted the first excited-state heavy-atom (carbon) quantum tunneling in one triplet di-π-methane rearrangement, in which the reaction rates and 12C/13C kinetic isotope effects (KIEs) can be enhanced by quantum tunneling at low temperatures. This unprecedented excited-state heavy-atom tunneling in a photoinduced reaction has recently been verified by an experimental 12C/13C KIE study by the Singleton group. Such combined computational and experimental studies should open up opportunities to discover more rare excited-state heavy-atom tunneling in other photoinduced reactions. In addition, we found unexpectedly large secondary KIE values in the five-coordinate Fe(III)-catalyzed hetero-Diels-Alder pathway, even with substantial C-C bond formation, due to the non-negligible equilibrium isotope effect (EIE) derived from altered metal coordination. Therefore, these KIE values cannot reliably reflect transition-state structures for the five-coordinate metal pathway. Furthermore, our density functional theory (DFT) quasi-classical molecular dynamics (MD) simulations demonstrated that the coordination mode and/or spin state of the iron metal as well as an electric field can affect the dynamics of this reaction (e.g., the dynamically stepwise process, the entrance/exit reaction channels).Moreover, we unveiled a new reaction mechanism to account for the uncommon Ru(II)-catalyzed geminal-addition semihydrogenation and hydroboration of silyl alkynes. Our proposed key gem-Ru(II)-carbene intermediates derived from double migrations on the same alkyne carbon were verified by crossover experiments. Additionally, our DFT MD simulations suggested that the first hydrogen migration transition-state structures may directly and quickly form the key gem-Ru-carbene structures, thereby "bypassing" the second migration step. Furthermore, our extensive study revealed the origin of the enantioselectivity of the Cu(I)-catalyzed 1,3-dipolar cycloaddition of azomethine ylides with β-substituted alkenyl bicyclic heteroarenes enabled by dual coordination of both substrates. Such mechanistic insights promoted our computational predictions of the enantioselectivity reversal for the corresponding monocyclic heteroarene substrates and the regiospecific addition to the less reactive internal C═C bond of one diene substrate. These predictions were proven by our experimental collaborators. Finally, our mechanistic insights into a few other reactions are also presented. Overall, we hope that these interactive computational and experimental studies enrich our mechanistic understanding and aid in reaction development.

Oxygen Evolution Reaction Driven by Charge Transfer from a Cr Complex to Co-Containing Polyoxometalate in a Porous Ionic Crystal.

Considerable efforts have been devoted to developing oxygen evolution reaction (OER) catalysts based on transition metal oxides. Polyoxometalates (POMs) can be regarded as model compounds of transition metal oxides, and cobalt-containing POMs (Co-POMs) have received significant interest as candidates. Nanocomposites based on Co-POMs have been reported to show high OER activities due to synergistic effects among the components; however, the role of each component is unclear due to its complex structure. Herein, we utilize porous ionic crystals (PICs) based on Co-POMs, which enable a composition-structure-function relationship to be established to understand the origin of the synergistic catalysis. Specifically, a Keggin-type POM [α-CoW12O40]6- and a Cr complex [Cr3O(OOCCH2CN)6(H2O)3]+ are implemented as PIC building blocks for the OER under nonbasic conditions. The potentially OER-active but highly soluble [α-CoW12O40]6- was successfully anchored in the crystalline PIC matrix via Coulomb interactions and hydrogen bonding induced by polar cyano groups of the Cr complex. The PIC exhibits efficient and sustained OER catalytic activity, while each building block is inactive. The Tafel slope of the linear sweep voltammetry curve and the relatively large kinetic isotope effect value suggest that elementary steps closely related to the OER rate involve single-electron and proton transfer reactions. Electrochemical and spectroscopic studies clearly show that the synergistic catalysis originates from the charge transfer from the Cr complex to [α-CoW12O40]6-; the increased electron density of [α-CoW12O40]6- may increase its basicity and accelerate proton abstraction as well as enhance electron transfer to stabilize the reaction intermediates adsorbed on [α-CoW12O40]6-.

Oxygen Atom Transfer Mechanism for Vanadium‐Oxo Porphyrin Complexes Mediated Aerobic Olefin Epoxidation

Comprehensive SummaryThe development of catalytic aerobic epoxidation by numerous metal complexes in the presence of aldehyde as a sacrificial reductant (Mukaiyama epoxidation) has been reported, however, comprehensive examination of oxygen atom transfer mechanism involving free radical and highly reactive intermediates has yet to be presented. Herein, meso‐tetrakis(pentafluorophenyl) porphyrinatooxidovanadium(IV) (VOTPFPP) was prepared and proved to be efficient toward aerobic olefin epoxidation in the presence of isobutyraldehyde. In situ electron paramagnetic resonance spectroscopy (in situ EPR) showed the generation, transfer pathways and ascription of free radicals in the epoxidation. According to the spectral and computational studies, the side‐on vanadium‐peroxo complexes are considered as the active intermediate species in the reaction process. In the cyclohexene epoxidation catalyzed by VOTPFPP, the kinetic isotope effect value of 1.0 was obtained, indicating that epoxidation occurred via oxygen atom transfer mechanism. The mechanism was further elucidated using isotopically labeled dioxygen experiments and density functional theory (DFT) calculations.