Intrinsic Anisotropy Research Articles

Symbolic regression based prediction of anisotropic closure in deep tunnels

This work investigates the applicability of Genetic Programming with Symbolic Regression to analyse the closure evolution of tunnels during and after excavation. Special attention is given to anisotropic closure evolution, which depends on the anisotropy of the initial stress state and the intrinsic anisotropy of the rock mass formation. A methodology is proposed that takes into account the information recorded during excavation to train the algorithm and find a free-form simple mathematical expression that captures the closure evolution over time. The proposed methodology is applied to two case studies of deep tunnels with high anisotropic convergence evolution. The results obtained show that this approach performs well with the small dataset used in this work. The proposed approach is an interesting tool to improve the understanding and prediction of the ground response.

Graphsene as a novel porous two-dimensional carbon material for enhanced oxygen reduction electrocatalysis

Graphene allotropes with varied carbon configurations have attracted significant attention for their unique properties and chemical activities. This study introduces a novel two-dimensional carbon-based material, termed Graphsene (GrS), through theoretical study. Comprising tetra-, penta-, and dodeca-carbon rings, GrS’s cohesive energy calculations demonstrate its superior structural stability over existing graphene allotropes, including graphyne and graphdiyne families. Phonon dispersion analysis confirms GrS’s dynamic stability and its relatively low thermal conductivity. All calculated GrS elastic constants meet the Born criteria, ensuring mechanical stability. Ab-initio molecular dynamic simulations show GrS maintains its structure at 300 K. HSE06 calculations reveal a narrow electronic bandgap of 20 meV, with the electronic band structure featuring a highly anisotropic Dirac-like cone due to its intrinsic structural anisotropy along armchair and zigzag directions. Notably, GrS is predicted to offer exceptional catalytic performance for the oxygen reduction reaction, favoring the four-electron reduction pathway with high selectivity under both acidic and alkaline conditions. This discovery opens promising avenues for developing metal-free catalyst materials in clean energy production.

From Brownian to Deterministic Motor Movement in a DNA-Based Molecular Rotor.

Molecular devices that have an anisotropic periodic potential landscape can be operated as Brownian motors. When the potential landscape is cyclically switched with an external force, such devices can harness random Brownian fluctuations to generate a directed motion. Recently, directed Brownian motor-like rotatory movement was demonstrated with an electrically switched DNA origami rotor with designed ratchet-like obstacles. Here, we demonstrate that the intrinsic anisotropy of DNA origami rotors is also sufficient to result in motor movement. We show that for low amplitudes of an external switching field, such devices operate as Brownian motors, while at higher amplitudes, they behave deterministically as overdamped electrical motors. We characterize the amplitude and frequency dependence of the movements, showing that after an initial steep rise, the angular speed peaks and drops for excessive driving amplitudes and frequencies. The rotor movement can be well described by a simple stochastic model of the system.

Gate Voltage- and Bias Voltage-Tunable Staggered-Gap to Broken-Gap Transition Based on WSe2/Ta2NiSe5 Heterostructure for Multimode Optoelectronic Logic Gate.

Two-dimensional (2D) materials with superior properties exhibit tremendous potential in developing next-generation electronic and optoelectronic devices. Integrating various functions into one device is highly expected as that endows 2D materials great promise for more Moore and more-than-Moore device applications. Here, we construct a WSe2/Ta2NiSe5 heterostructure by stacking the p-type WSe2 and the n-type narrow gap Ta2NiSe5 with the aim to achieve a multifunction optoelectronic device. Owing to the large interface potential barrier, the heterostructure device reveals a prominent diode feature with a large rectify ratio (7.6 × 104) and a low dark current (10-12 A). Especially, gate voltage- and bias voltage-tunable staggered-gap to broken-gap transition is achieved on the heterostructure device, which enables gate voltage-tunable forward and reverse rectifying features. As results, the heterostructure device exhibits superior self-powered photodetection properties, including a high detectivity of 1.08 × 1010 Jones and a fast response time of 91 μs. Additionally, the intrinsic structural anisotropy of Ta2NiSe5 endows the heterostructure device with strong polarization-sensitive photodetection and high-resolution polarization imaging. Based on these characteristics, a multimode optoelectronic logic gate is realized on the heterostructure via synergistically modulating the light on/off, polarization angle, gate voltage, and bias voltage. This work shed light on the future development of constructing high-performance multifunctional optoelectronic devices.

A correlated ferromagnetic polar metal by design.

Polar metals have recently garnered increasing interest because of their promising functionalities. Here we report the experimental realization of an intrinsic coexisting ferromagnetism, polar distortion and metallicity in quasi-two-dimensional Ca3Co3O8. This material crystallizes with alternating stacking of oxygen tetrahedral CoO4 monolayers and octahedral CoO6 bilayers. The ferromagnetic metallic state is confined within the quasi-two-dimensional CoO6 layers, and the broken inversion symmetry arises simultaneously from the Co displacements. The breaking of both spatial-inversion and time-reversal symmetries, along with their strong coupling, gives rise to an intrinsic magnetochiral anisotropy with exotic magnetic field-free non-reciprocal electrical resistivity. An extraordinarily robust topological Hall effect persists over a broad temperature-magnetic field phase space, arising from dipole-induced Rashba spin-orbit coupling. Our work not only provides a rich platform to explore the coupling between polarity and magnetism in a metallic system, with extensive potential applications, but also defines a novel design strategy to access exotic correlated electronic states.

Biomimetic wafer-scale alignment of tellurium nanowires for high-mobility flexible and stretchable electronics.

Flexible and stretchable thin-film transistors (TFTs) are crucial in skin-like electronics for wearable and implantable applications. Such electronics are usually constrained in performance owing to a lack of high-mobility and stretchable semiconducting channels. Tellurium, a rising semiconductor with superior charge carrier mobilities, has been limited by its intrinsic brittleness and anisotropy. Here, we achieve highly oriented arrays of tellurium nanowires (TeNWs) on various substrates with wafer-scale scalability by a facile lock-and-shear strategy. Such an assembly approach mimics the alignment process of the trailing tentacles of a swimming jellyfish. We further apply these TeNW arrays in high-mobility TFTs and logic gates with improved flexibility and stretchability. More specifically, mobilities over 100 square centimeters per volt per second and on/off ratios of ~104 are achieved in TeNW-TFTs. The TeNW-TFTs on polyethylene terephthalate can sustain an omnidirectional bending strain of 1.3% for more than 1000 cycles. Furthermore, TeNW-TFTs on an elastomeric substrate can withstand a unidirectional strain of 40% with no performance degradation.

Anisotropic Strain-Tailoring Nonlinear Optical Response in van der Waals NbOI2.

Two-dimensional (2D) NbOI2 demonstrates significant second-harmonic generation (SHG) with a high conversion efficiency. To unlock its full potential in practical applications, it is desirable to modulate the SHG behavior while utilizing the intrinsic lattice anisotropy. Here, we demonstrate direction-specific modulation of the SHG response in NbOI2 by applying anisotropic strain with respect to the intrinsic lattice orientations, where more than 2-fold enhancement in the SHG intensity is achieved under strain along the polar axis. The strain-driven SHG evolution is attributed to the strengthened built-in piezoelectric field (polar axis) and the enlarged Peierls distortions (nonpolar axis). Moreover, we provide quantifications of the correlation between strain and SHG intensity in terms of the susceptibility tensor. Our results demonstrate the effective coupling of orientation-specific strain to the anisotropic SHG response through the intrinsic polar order in 2D nonlinear optical crystals, opening a new paradigm toward the development of functional devices.

Laboratory Test and Constitutive Model for Quantifying the Anisotropic Swelling Behavior of Expansive Soils

Expansive soils exhibit directionally dependent swelling that traditional isotropic models fail to capture. This study investigates the anisotropic swelling characteristics of expansive soil with a medium swelling potential through the use of modified oedometric testing. Vertical swelling strains can reach up to 1.71 times that of the horizontal movements, confirming intrinsic anisotropy. A nonlinear elastic constitutive model incorporates vertical and horizontal elastic moduli with respect to matric suction to characterize anisotropy. Three elastic parameters were determined through the experiments, and predictive equations were developed to estimate the unsaturated moduli. The constitutive model and predictive techniques provide practical tools to better assess expansive soil pressures considering anisotropy, offering guidelines for utilization and design. The outcomes advance understanding of these soils’ directionally dependent behavior and stress–strain–suction response.

Natural responses of Neoproterozoic dynamic karst springs to rainfall events, São Miguel Watershed, Minas Gerais, Brazil

AbstractKarst aquifers consist of complex networks of conduits in which groundwater flows and recharge/discharge processes are generally more dynamic than in other types of aquifers. Due to their intrinsic heterogeneity and anisotropy, monitoring, quantifying, and analysing natural responses of karst springs is an efficient tool. Unlike Cenozoic and Mesozoic rocks, in Neoproterozoic karst systems, groundwater circulates and stores generally in dissolution features known as tertiary porosity, as the rock's primary porosity is recrystallized, considered negligible. This article studies the hydrodynamics of a karst portion of the São Miguel River basin, southwest of the state of Minas Gerais, Brazil. The region is predominantly composed of Neoproterozoic carbonate rocks, dating from about 570 to 540 million years ago. During a hydrological year (2019–2020), three karst springs (S1, S2, and S3) were daily monitored through their natural responses (variations of electrical conductivity, EC, temperature, T, and discharge, Q) to rainfall episodes. The data were interpreted based on the analysis of spring hydrographs, time series, recession curves (seasonal and intra‐annual), and statistics of EC, T, and Q variations. The results show the three springs generally exhibit quick flow, typically karstic, in the case of hydrosystems with a well‐structured and functional underground drainage network. The time series indicate the hydrosystem drained by S1 presents slower circulation and a lower degree of linearity, resulting from the higher sinuosity of the system, while the hydrosystems of S2 and S3 have similar behaviours, of quick water circulations immediately after a rainy episode. The degrees of karstification classify S1 and S2 as complex and extensive karst systems consisting of several subsystems, and S3 as a system in which the conduit network is more developed at the upper epiphreatic zone than near the outlet.

Mueller matrix-based characterization of cervical tissue sections: a quantitative comparison of polar and differential decomposition methods.

Quantitative optical polarimetry has received considerable recent attention owing to its potential for being an efficient diagnosis and characterizing tool with potential applications in biomedical research and various other disciplines. In this regard, it is crucial to validate various Mueller matrix (MM) decomposition methods, which are utilized to extract and quantify the intrinsic individual polarization anisotropy properties of various complex optical media. To quantitatively compare the performance of both polar and differential MM decomposition methods for probing the structural and morphological changes in complex optical media through analyzing their intrinsic individual polarization parameters, which are extracted using the respective decomposition algorithms. We also intend to utilize the decomposition-derived anisotropy parameters to distinguish among the cervical tissues with different grades of cervical intraepithelial neoplasia (CIN) and to characterize the healing efficiency of an organic crystal. Polarization MM of the cervical tissues with different grades of CIN and the different stages of the self-healing crystal are recorded with a home-built MM imaging setup in the transmission detection geometry with a spatial resolution of . The measured MMs are then processed with both the polar and differential MM decomposition methods to extract the individual polarization parameters of the respective samples. The derived polarization parameters are further analyzed to validate and compare the performance of both the MM decomposition methods for probing and characterizing the structural changes in the respective investigated optical media through their decomposition-derived intrinsic individual polarization properties. Pronounced differences in the decomposed-derived polarization anisotropy parameters are observed for cervical tissue sections with different grades of CIN. While a significant increase in the depolarization parameter is obtained with the increment of CIN stages for both the polar [ for CIN grade one (CIN-I) and for CIN grade two (CIN-II))] and differential ( for CIN-I and for CIN-II) decomposition methods, a trend reversal is seen for the linear diattenuation parameter , indicating the structural distortion in the cervical morphology due to the CIN disease. More importantly, with the differential decomposition algorithm, the magnitude of the derived parameter decreases from 0.26 to 0.19 with the progression of CIN, which was not being probed by the polar decomposition method. Our results demonstrate that the differential decomposition of MM holds certain advantages over the polar decomposition method to characterize and probe the structural changes in the cervical tissues with different grades of CIN. Although the quantified individual polarization parameters obtained through both the MM decomposition methods can be used as useful metrics to characterize various optical media, in case of complex turbid media such as biological tissues, incorporation of the differential decomposition technique may yield more efficient information. Also, the study highlights the utilization of MM polarimetry with an appropriate decomposition technique as an efficient diagnostic and characterizing tool in the realm of biomedical clinical research, and various other disciplines.

Enhanced THz Circular-Polarization Detection in Miniaturized Chips with Chiral Antennas

Recent advancements in terahertz (THz) wave technology have highlighted the criticality of circular-polarization detection, fostering the development of more compact, efficient on-chip THz circular-polarization detectors. In response to this technological imperative, we presented a chiral-antenna-integrated GaAs/AlGaAs quantum well (QW) THz detector. The chiral antenna selectively couples the incident light of a specific circular-polarization state into a surface-plasmon polariton wave that enhances the absorptance of the QWs by a factor of 12 relative to a standard 45° faceted device, and reflects a significant amount of the incident light of the orthogonal circular-polarization state. The circular-polarization selectivity is further enhanced by the QWs with a strong intrinsic anisotropy, resulting in a circular-polarization extinction ratio (CPER) as high as 26 at 6.52 THz. In addition, the operation band of the device can be adjusted by tuning the structural parameters of the chiral structure. Moreover, the device preserves a high performance for oblique incidence within a range of ±5°, and the device architecture is compatible with a focal plane array. This report communicates a promising approach for the development of miniaturized on-chip THz circular-polarization detectors.

The functional role of spatial anisotropies in ensemble perception.

The human brain can rapidly represent sets of similar stimuli by their ensemble summary statistics, like the average orientation or size. Classic models assume that ensemble statistics are computed by integrating all elements with equal weight. Challenging this view, here, we show that ensemble statistics are estimated by combining parafoveal and foveal statistics in proportion to their reliability. In a series of experiments, observers reproduced the average orientation of an ensemble of stimuli under varying levels of visual uncertainty. Ensemble statistics were affected by multiple spatial biases, in particular, a strong and persistent bias towards the center of the visual field. This bias, evident in the majority of subjects and in all experiments, scaled with uncertainty: the higher the uncertainty in the ensemble statistics, the larger the bias towards the element shown at the fovea. Our findings indicate that ensemble perception cannot be explained by simple uniform pooling. The visual system weights information anisotropically from both the parafovea and the fovea, taking the intrinsic spatial anisotropies of vision into account to compensate for visual uncertainty.

Ultralow Electric Current-Assisted Magnetization Switching due to Thermally Engineered Magnetic Anisotropy.

Control of magnetic anisotropy in thin films with perpendicular magnetic anisotropy is of paramount importance for the development of spintronics with ultralow-energy consumption and high density. Traditional magnetoelectric heterostructures utilized the synergistic effect of piezoelectricity and magnetostriction to realize the electric field control of magnetic anisotropy, resulting in additional fabrication and modulation processes and a complicated device architecture. Here, we have systematically investigated the electric current tuning of the magnetic properties of the metallic NiCo2O4 film with intrinsic perpendicular magnetic anisotropy. Ferrimagnetic-to-paramagnetic phase transition has been induced through Joule heating, resulting in a rapid decrease of both magnetic coercivity and moment. An ultralow current density of 2.5 × 104 A/cm2, which is 2 to 3 orders magnitude lower than that of conventional spin transfer torque devices, has been verified to be effective for the control of the magnetic anisotropy of NiCo2O4. Successful triggering of magnetic switching has been realized through the application of a current pulse. These findings provide new perspectives toward the electric control of magnetic anisotropy and design of spintronics with an ultralow driving current density.

Influence of Fe3+ substitution by Al3+ on the structural, microstructural, and magnetic properties of Co0.2Ni0.3Zn0.5Fe2O4 nanoparticles

A series of aluminum-substituted ferrite nanoparticles, Co0.2Ni0.3Zn0.5Fe2-xAlxO4 (0 ≤ x ≤ 1) was synthesized using the polyol method. The structural analysis confirmed the formation of pure cubic ferrispinels. The unit cell parameter decreased monotonically with increasing Al3+ content obeying Vegard's law. Besides, it was found that Al3+ ions prefer to enter octahedral sites. The produced particles consisted of roughly spherical ultrasmall nanocrystals with an average particle size of ∼3-6 nm. The nanoparticles are superparamagnetic with magnetic features (blocking temperature, saturation magnetization and Curie temperature) showing a decrease with the increase in Al3+ content. The magnetic tendency correlates with the weakening of the superexchange interactions in the spinel sublattices caused by substituting the non-magnetic Al3+ ions for Fe3+ ones. While, the coercivity and effective magnetic anisotropy increased with the increase of Al3+ concentration, suggesting the development of high surface anisotropy that largely compensates for the decrease of intrinsic magnetic anisotropy caused by the magnetic dilution.

In situ Light‐Writable Orientation Control in Liquid Crystal Elastomer Film Enabled by Chalcones

AbstractLiquid crystal elastomers (LCEs) are stimulus‐responsive materials with intrinsic anisotropy. However, it is still challenging to in situ program the mesogen alignment to realize three‐dimensional (3D) deformations with high‐resolution patterned structures. This work presents a feasible strategy to program the anisotropy of LCEs by using chalcone mesogens that can undergo a photoinduced cycloaddition reaction under linear polarized light. It is shown that by controlling the polarization director and the irradiation region, patterned alignment distribution in a freestanding LCE film can be created, which leads to complex and reversible 3D shape‐morphing behaviors. The work demonstrates an in situ light‐writing method to achieve sophisticated topography changes in LCEs, which has potential applications in encryption, sensors, and beyond.

In situ Light-Writable Orientation Control in Liquid Crystal Elastomer Film Enabled by Chalcones.

Liquid crystal elastomers (LCEs) are stimulus-responsive materials with intrinsic anisotropy. However, it is still challenging to in situ program the mesogen alignment to realize three-dimensional (3D) deformations with high-resolution patterned structures. This work presents a feasible strategy to program the anisotropy of LCEs by using chalcone mesogens that can undergo a photoinduced cycloaddition reaction under linear polarized light. It is shown that by controlling the polarization director and the irradiation region, patterned alignment distribution in a freestanding LCE film can be created, which leads to complex and reversible 3D shape-morphing behaviors. The work demonstrates an in situ light-writing method to achieve sophisticated topography changes in LCEs, which has potential applications in encryption, sensors, and beyond.

Understanding magnetic hyperthermia performance within the "Brezovich criterion": beyond the uniaxial anisotropy description.

Careful determination of the heating performance of magnetic nanoparticles under AC fields is critical for magnetic hyperthermia applications. However, most interpretations of experimental data are based on the uniaxial anisotropy approximation, which in the first instance can be correlated with the particle aspect ratio. This is to say, the intrinsic magnetocrystalline anisotropy is discarded, under the assumption that the shape contribution dominates. We show in this work that such a premise, generally valid for large field amplitudes, does not hold for describing hyperthermia experiments carried out under small field values. Specifically, given its relevance for in vivo applications, we focus our analysis on the so-called "Brezovich criterion", H·f = 4.85 × 108 A m-1 s-1. By means of a computational model, we show that the intrinsic magnetocrystalline anisotropy plays a critical role in defining the heat output, determining also the role of the shape and aspect ratio of the particles on the SLP. Our results indicate that even small deviations from spherical shape have an important impact on optimizing the heating performance. The influence of interparticle interactions on the dissipated heat is also evaluated. Our results call, therefore, for an improvement in the theoretical models used to interpret magnetic hyperthermia performance.

The impact of molecular orientations on the energy levels of A-D-A acceptors: implications for the charge separation driving force of organic solar cells.

The energetic landscape of charge carriers, namely the ionization potential (IP) and electron affinity (EA), can play a crucial role in the charge separation and migration processes for organic solar cells (OSCs). However, the impact of molecular orientations on the energy levels remains elusive, especially in acceptor-donor-acceptor (A-D-A) type nonfullerene acceptors (NFAs) with intrinsic anisotropy. Using the self-consistent quantum mechanics/embedded charge (sc-QM/EC) approach, we have investigated the energy level shifts from the edge-on or face-on surfaces to the bulk phase for three typical NFA crystals, IDIC-4F, INIC-4F, and Y6. The results point out that the surface-to-bulk changes in IP are limited within 0.2 eV for both the orientations due to the mutual counteraction between the electrostatic and induction effects. In sharp contrast, the EA values are substantially decreased from the bulk to the surfaces; especially, for the face-on orientation, the reduction reaches 0.5-0.8 eV. This indicates that the face-on orientation can provide a significant driving force for electrons moving from the surface or the interface to the bulk phase and thus improve the charge separation efficiency. Our work indicates that enhancing the face-on orientation is an effective method to increase the charge separation driving force for the OSCs based on A-D-A NFAs.

Multiple-polarization-sensitive photodetector Based on a plasmonic metasurface.

On-chip polarization-sensitive photodetectors are highly desired for ultra-compact optoelectronic systems. It has been demonstrated that polarization-sensitive photodetection can be realized using intrinsic chiral and anisotropy materials. However, these photodetectors can only realize the detection of either circularly polarized light (CPL) or linear polarized light (LPL) and are not applicable to multiple-polarization-sensitive photodetection. Herein, we experimentally demonstrate a metasurface-integrated semiconductor to realize multiple-polarization-sensitive photodetection at visible wavelengths. This device is composed of a MoSe2 monolayer on an H-shaped plasmonic nanostructure. The geometric chirality and anisotropy of the H-shaped nanostructure result in CPL and LPL resolved optical responses. By integrating a plasmonic metasurface with monolayer MoSe2, we converted polarization-sensitive optical absorption to the polarization-sensitive photocurrent of the device through the photoconductive effect. Polarization-sensitive photocurrent responses to both CPL and LPL are systematically investigated, which demonstrate a high photocurrent circular dichroism (CD) of 0.35 at a wavelength of 810 nm and photocurrent linear polarization (LP) of 0.4 at a wavelength of 633 nm. Our results provide a potential pathway to realize multiple-polarization-sensitive applications in medicine analysis, biology, and remote sensing.

Ultrafast switching to zero field topological spin textures in ferrimagnetic TbFeCo films.

The capability of femtosecond (fs) laser pulses to manipulate topological spin textures on a very short time scale is sparking considerable interest. This article presents the creation of high density zero field topological spin textures by fs laser excitation in ferrimagnetic TbFeCo amorphous films. The topological spin textures are demonstrated to emerge under fs laser pulse excitation through a unique ultrafast nucleation mechanism, rather than thermal effects. Notably, large intrinsic uniaxial anisotropy could substitute the external magnetic field for the creation and stabilization of topological spin textures, which is further verified by the corresponding micromagnetic simulation. The ultrafast switching between topological trivial and nontrivial magnetic states is realized at an optimum magnitude of magnetic field and laser fluence. Our results would broaden the options to generate zero-field topological spin textures from versatile magnetic states and provides a new perspective for ultrafast switching of 0/1 magnetic states in spintronic devices.