Peak Intensity Research Articles

Ab Initio Computation of Auger Decay in Heavy Metals: Zinc about It.

We report the first coupled-cluster study of Auger decay in heavy metals. The zinc atom is used as a case study due to its relevance to the Auger emission properties of the 67Ga radionuclide. Coupled-cluster theory combined with complex basis functions is used to describe the transient nature of the core-ionized zinc atom. We also introduce second-order Møller-Plesset perturbation theory as an alternative method for computing partial Auger decay widths. Scalar-relativistic effects are included in our approach for computing Auger electron energies by means of the spin-free exact two-component one-electron Hamiltonian, while spin-orbit coupling is treated by means of perturbation theory. We center our attention on the K-edge Auger decay of zinc dividing the spectrum into three parts (K-LL, K-LM, and K-MM) according to the shells involved in the decay. The computed Auger spectra are in good agreement with experimental results. The most intense peak is found at an Auger electron energy of 7432 eV, which corresponds to a 1D2 final state arising from K-L2L3 transitions. Our results highlight the importance of relativistic effects for describing Auger decay in heavier nuclei. Furthermore, the effect of a first solvation shell is studied by modeling Auger decay in the hexaaqua-zinc(II) complex. We find that K-edge Auger decay is slightly enhanced by the presence of the water molecules as compared to the bare atom.

Relationship between the physicochemical properties and amylose content of rice starch in rice varieties with the same genetic background

This study analyzed six mutant rice samples from uniform genetic and planting backgrounds with amylose contents ranging from 4.21% to 17.52%. The physicochemical, structural and functional properties of the extracted starches were investigated and their relationships were analyzed. No significant changes were observed in the morphology, granule size, amylopectin chain-length distribution, and crystalline type of rice starches. The average hydrodynamic radius (Rh), relative crystallinity (RC), the ratio of 1045 cm−1/1022 cm−1 (R1045/1022), and lamellar peak intensity (Imax) were significantly correlated with amylose content, impacting the digestion properties. A higher degree of order in starch structure was found to impede its digestion progress by affecting its physicochemical characteristics. The decreased onset temperature and increased gelatinization temperature range indicated increased crystalline structure instability, decreasing peak time and pasting temperature. Furthermore, there were notable reductions in starch digestion rate (k) and rapidly digestible starch content (RDS) as amylose content increased, despite no significant change in the final digestion percentage. The k exhibited a positive correlation with Rh, while there was a positive association between RC, R1045/1022, and Imax with RDS. These findings can provide valuable guidance for rice breeders in developing rice varieties with specific functional attributes.

Effects of HiPIMS Duty Cycle on Plasma Discharge and the Properties of Cu Film.

In this paper, Cu thin films were deposited on Si (100) substrates by the high-power impulse magnetron sputtering (HiIPMS) technique, and the effects of different duty cycles (from 2.25% to 5.25%) on the plasma discharge characteristics, microstructure, and electrical properties of Cu thin films were investigated. The results of the target current test show that the peak target current remains stable under 2.25% and 3% duty cycle conditions. Under the conditions of a 4.5% and 5.25% duty cycle, the target peak current shows a decreasing trend. The average power of the target shows a rising trend with the increase in the duty cycle, while the peak power of the target shows a decreasing trend with the increase in the duty cycle. The results of OES show that with the increase in the duty cycle, the total peak intensity of copper and argon emissions shows an overall increasing trend. The duty cycle from 3% to 4.5% change in copper and argon emission peak total intensity change is not obvious. The deposition rate and surface morphology of the copper film were investigated by scanning electron microscopy, and the deposition rate of the copper film increased with the increase in the duty cycle, which was mainly due to the increase in the average power. The surface roughness of the copper film was evaluated by atomic force microscopy. X-ray diffraction (XRD) was used to analyze the grain size and texture of the Cu film, and the results showed that the average grain size of the Cu film increased from 38 nm to 59 nm on the (111) and (200) crystal planes. Four-probe square resistance test copper film resistivity in 2.25%, 3% low duty cycle conditions of the copper film resistivity is generally higher than 4.5%, 5.25% high duty cycle conditions, the copper film resistivity shows the trend of change is mainly affected by the copper film grain size and the (111) face of the double effect of the optimal orientation. The lowest resistivity of the copper film measured under the 4.5% duty cycle condition is 1.7005 μΩ·cm, which is close to the intrinsic resistivity of the copper film of 1.67 μΩ·cm.

Luminescence of CsLa1-хCeхSiS4 thiosilicate solid solution: From STE to Ce3+ emission

A series of single crystals of CsLa1-хСехSiS4 monophasic solid solution (x = 0–1) has been obtained for the first time by high-temperature flux synthesis. Methods of XRD and chemical analysis, absorption and low-temperature (from T = 5 K) luminescent spectroscopy were used. The results of the band scheme calculating using density functional theory correlate with spectroscopy data. One non-elementary d → f emission band of Ce3+ ions is observed in the region of 520 nm in the luminescence spectra at room temperature at any value of the x parameter. The luminescence decay kinetics of Ce3+ ions upon excitation by a pulsed electron beam, X-ray synchrotron radiation or intracenter photoexcitation is characterized by a nanosecond component. As the parameter x increases, the decay time is reduced from 132 ns (x = 0.005) to 0.88 ns (x = 1). The luminescence decay kinetics upon photoexcitation at x = 0.005–0.12 is characterized by monoexponential decay with τ = 31.4 ± 0.2 ns. Concentration quenching of the Ce3+ ion photoluminescence is not observed up to the value of the parameter x = 0.12; it only appears at x = 1. The anomalously short decay time of the Ce3+ ions luminescence in CsCeSiS4 upon both X-ray excitation and photoexcitation is associated with concentration quenching.At temperature 5 K, new intense bands at 408 and 688 nm in addition to the Ce3+ emission band observed in the photoluminescence spectra of nominally pure CsLaSiS4 or at the lowest parameter value x = 0.005. These bands correspond to the luminescence of self-trapped excitons (STE) and defects. With increasing x parameter, the STE emission band is reabsorbed by the absorption of Ce3+ ions and is quenched due to the resonance energy transfer STE → Ce3+ center. Thermoluminescence glow curves of CsLa1-xCexSiS4 irradiated with X-ray at T = 90 K are characterized by several low temperature intense peaks, which indicates a high concentration of charge carrier traps.

Optical fiber sensor for curvature and temperature simultaneous measurement based on an anti-resonance mechanism

Based on an anti-resonance mechanism, we propose and experimentally demonstrate an optical fiber sensor for simultaneous measurement of curvature and temperature. The sensor structure consists of a hollow fiber and a twisted graded index multimode fiber spliced between two single-mode fibers. By using the twisted graded index multimode fiber to change the energy distribution of the mode field, not only improve the coupling efficiency of the sensor but also the sensitivity of the curvature measurement. The experimental results show that the intensity of the resonance peak based on the anti-resonance mechanism decreases with the increase of curvature, while the resonance peak wavelength is insensitive to curvature. In addition, due to the thermal expansion and thermo-optic effect of the fiber, the wavelength of the resonance peak is red-shifted with increasing temperature, and the intensity of the resonance peak is insensitive to temperature. Therefore, the intensity and wavelength signals of the resonance peak are monitored separately, and the simultaneous measurement of displacement and temperature is realized. The maximum sensitivity of the proposed curvature sensor can reach −2.84 dB/m−1, the dynamic range of curvature is 0 m−1 to 20.18 m−1, and the temperature sensitivity of 20 pm/∘C is realized. The proposed sensor has a compact structure, simple preparation, high coupling efficiency, and good repeatability, making it an ideal choice for simultaneous measurement of curvature and temperature in structural monitoring, mechanical manufacturing, and other fields.

Growth of β-Ga2O3 nanostructures by thermal oxidation of GaN-on-sapphire for optoelectronic devices applications

Heterostructures of wide-bandgap semiconductors, like β-Ga2O3/ GaN, are being used in many high-power, high-frequency electronic and optoelectronic devices. This paper presents the growth of β-Ga2O3 thin film and nanostructures by thermally oxidizing (at 1000 °C) the planar and nano-structured GaN surfaces respectively. The nano-structures of GaN (having 300–500 nm long vertical nano-kinks) are fabricated by metal-assisted chemical etching of GaN surface for 1–2 hours. The thermally grown β-Ga2O3 samples are polycrystalline. The chemical analysis of the samples using X-ray photoelectron spectroscopy (XPS) showed enhancement of Ga-O peak intensity (at 20.21–20.3 eV) at the expense of the Ga-N peak intensity (at 19.2–19.7 eV) in the thermal oxidation process. The O1s XPS spectra of the oxidized samples exhibited prominent signature of O2- ions (530.7–530.9 eV) representing the formation of Ga2O3 with presence of adsorbed hydroxyl group at the surface (532.2 – 532.4 eV). The valance band XPS spectra disclosed the formation of an additional Ga(4 s)–O(2p) hybridization energy state, and the valence band maxima increased from 2.3 eV to 3.25 eV. The Raman spectra of the oxidized samples exhibited multiple Ag and Bg vibrational modes of β-Ga2O3 along with intense E2(high), A1(LO) modes of GaN. The time-resolved photoluminescence spectra of the samples demonstrated fast transition of charge carriers from excited state to ground state with 460–820 pico-seconds average career lifetime.

A comparative study of DFT and experimental investigations for exploring the effect of Ti doping on the electronic, structural, and optical properties of Cu2O

The current study presents the influence of Ti doping on the electronic, structural, and optical properties of Cu2O. The investigation employs a comparative approach, integrating theoretical calculations using density functional theory and experimental outcomes. Density of states spectra depicted the maximum contribution of Cu-d and O-p in the valence band, whereas Ti-d states filled the conduction band. Structural changes induced by Ti doping, including variations in peak intensity, crystallite size, and defects were examined in detail by X-ray diffraction analysis. The field emission scanning electron microscopy described grain morphology significantly changing upon Ti doping. Optical properties were scrutinized to determine variations in optical parameters. For both un-doped and Ti-doped Cu2O, the experimentally measured band gap was found to be decreased, ranging from 2.05 eV to 1.69 eV. The comparative studies enable a valuable understanding of the effectiveness of Ti doping in modifying the properties of Cu2O.

Using salted egg white in steamed bread: Impact on functional and structural characteristics

Steamed bread has long been an important part of Chinese cuisine. This study investigated the effects of salted egg white (SEW) (5, 10, 15, and 20% w/w) on the quality of steamed breads. Findings revealed that SEW notably enhanced the bread's volume and texture, with a 20% inclusion significantly boosting water retention and rheological properties, albeit reducing bread's lightness. In addition, the H-bond absorption band intensity in the Fourier transform infrared spectroscopy (FTIR) analysis showed increased peak intensities with higher SEW levels, indicative of protein structure alterations. X-ray diffraction confirmed the presence of an amylose–lipid complex. Scanning electron microscope (SEM) and Confocal laser scanning microscope (CLSM) imaging depicted a smooth, consistent protein network with SEW addition. Consumer sensory evaluation responded favourably to the SEW15 steamed bread, suggesting its potential for food industry application. Overall, the study considers SEW an effective ingredient for improving steamed bread quality.

Sequence analysis of respiratory syncytial virus cases reveals a novel subgroup -B strain circulating in north-central Italy after pandemic restrictions

BackgroundFollowing the pandemic restrictions, the epidemiology of respiratory syncytial virus (RSV) has changed, leading to intense hospitalization peaks. ObjectivesThis study, conducted at multiple sites in Italy, aimed to describe the temporal dynamics of two post-COVID-19 RSV epidemics. Additionally, the circulating RSV-A and -B lineages were characterized and compared to those found in 2018 and 2019. Study designRespiratory specimens and data were collected from RSV-positive patients, both inpatients, and outpatients, of all ages at three sites in north-central Italy. To analyze these samples, roughly one-sixth were sequenced in the attachment glycoprotein G gene and subjected to phylogenetic and mutational analyses, including pre-pandemic sequences from north-central Italy. ResultsThe first post-pandemic surge of RSV cases was quite intense, occurring from October 2021 to early January 2022. The subsequent RSV epidemic (from November 2022 to early March 2023) also had a high impact, characterized by a rise in elderly patient cases. Post-pandemic cases of RSV-A were caused by various strains present in Italy prior to COVID-19. In contrast, a distinct RSV-B lineage, which was concurrently spreading in other countries, was identified as the main cause of the surge in 2022–2023 but remained undetected in Italy before the pandemic. ConclusionsThis study describes the temporal dynamics of post-pandemic RSV subgroups and uncovers a lineage of RSV-B with high genetic divergence that may have increased the impact of decreased population immunity.

Achieving thermoelectric properties of ultra-high-performance concrete using carbon nanotubes and fibers

The study investigated the impact of carbon nanotubes (CNTs), carbon fibers (CFs), steel fibers, and varying water-to-binder (W/B) ratios on the thermoelectric and mechanical properties of ultra-high-performance concrete (UHPC). Flowability tests revealed reduced flow with decreased water content and the addition of CNTs or CFs, particularly pronounced at a lower W/B ratio. Thermal gravimetric analysis and Fourier-transform infrared spectroscopy demonstrated differences in peak intensities and shifts in peaks related to the hydration products of the UHPC by the incorporation of the CNTs and CFs. The compressive strength and tensile performance increased with reduced W/B ratios and the inclusion of steel fibers, whereas the CNTs and CFs affected the strength differently based on their dispersion and interaction with other components that influenced porosity. The presence of steel fibers reduces the percolation threshold for CNTs and CFs, indicating a synergistic effect that enhances electron transport connectivity. The thermal conductivity increased with the addition of CNTs, CFs, and steel fibers, enhancing heat transfer within the UHPC. The thermoelectric figure of merit (ZT) values highlighted the combined impact of CNTs, CFs, steel fibers, and W/B ratios on the thermoelectric efficiency of the UHPC, showing significant improvements with the inclusion of steel fibers and the interplay between the CNTs and W/B ratios. Ultimately, upon introducing 1.5 % steel fibers and 0.3 % CNTs, a substantial enhancement in the thermoelectric ZT was observed, surpassing the standard UHPC values by 12 orders of magnitude.

Juncus rigidus high biomass and cellulose productivity under wastewater salinity stress - A paradigm shift to the valorization of RO reject water

The use of water purifiers is intensively catching up and disposing of reverse osmosis reject water is of great concern. Reject water management using conventional methods is costly and harmful to the environment. To address this issue, the present study aims to utilize reverse osmosis reject wastewater using an eco-friendly approach. Juncus rigidus was treated with reject wastewater containing different salinity levels. Wastewater-treated plant dry biomass increased with increasing reject water salinity, and 625.3 g dry biomass recovered in treatment-B (~18,520 ppm). However, ~23,220 ppm wastewater salinity was lethal to the plants. The cellulose was extracted by alkali hydrolysis. The cellulose content in the wastewater-treated biomass was significantly higher in Treatment-B compared to both the control and Treatment-A (~12,744 ppm). The water salinity enhanced the cellulose (26.49 %) production in J. rigidus. Cellulose purity was confirmed using spectroscopic and thermogravimetric means. XRD shows highest crystallinity Index (77.29) with a d-spacing of 4.7 Å and 5.7 nm crystallite size in treatment-B. FTIR results reveal well-defined relevant peaks for OH, CH, CO, CH2, C-O-C, CO groups in treatment-B cellulose. Salinity impacts carboxyl groups in treatment B cellulose with a sharper and intense peak at 1644 cm−1 responsible for water absorption. Treatment-B exhibits higher thermal stability due to increased crystallinity. DSC shows endothermic depolymerization of cellulose with distinct peaks for different treatments. Morphological traits got better with increasing salinity with no adverse effect on cellulose. Salinity moderately affected the water absorption capacity of cellulose. All cellulose samples were devoid of gram-negative bacteria known by microbial test. This pioneering work underscores the plant's remarkable capacity not only to accomplish the circular economy by the valorization of wastewater obtained from various water purifiers for Juncus cultivation for cellulose production for diverse applications but also to generate income from wastewater.

Characteristics of the incorporation of Yb defect states in CuO:ZnO nanocomposite

Exploring magnetic order in nonferromagnetic substances, such as CuO:ZnO, becomes especially attractive when introducing defect states through nonmagnetic ion doping. In this study, we delved into the impact of Yb doping on the structural, morphological, optical, and magnetic properties of CuO:ZnO. The Yb doped CuO:ZnO was prepared with different Yb concentrations (x = 0.00–20 %) via the temperature-assisted co-precipitation method. X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDX), field emission scanning electron microscopy (FE-SEM), high resolution transmission electron microscopy (HR-TEM), X-ray photoelectron spectroscopy (XPS), Fourier-transform infrared spectroscopy (FTIR), UV–Vis spectroscopy, and vibrating sample magnetometer (VSM) were used to investigate the structural, morphological, optical, and magnetic properties of Yb doped CuO:ZnO nanocomposites.The incorporation of Yb in CuO:ZnO nanocomposites leads to a notable shift of the characteristic XRD peaks of CuO and ZnO to lower angles, accompanied by an increase in the lattice parameters. UV–visible absorption spectroscopy shows an overall decrease in the optical band gap energy of ZnO as the Yb defect level increases. FE-SEM studies revealed the transformation of spherical structures into agglomerated non-spherical structures upon the introduction of Yb ions into CuO:ZnO nanocomposites. According to XPS data, the predominant valences of Yb-doped CuO:ZnO nanocomposites are Zn2+, Cu2+, and Yb3+. One noteworthy observation from the XPS results is that, in comparison to the intensity of OL or Oad peaks, the intensity of OV (Oxygen vacancy) defect peak increases when the Yb impurity concentration increases. Magnetic measurements demonstrated a diamagnetic order in pure ZnO, which converts to a ferromagnetic order with the incorporation of Yb defect states. The ferromagnetic properties of the Yb-doped CuO:ZnO nanocomposite can be ascribed to the exchange interaction of Yb3+ ions with defect states (Oxygen Vacancy) in ZnO and CuO.

In vitro assessment of the effect of magnetic fields on efficacy of biosynthesized selenium nanoparticles by Alborzia kermanshahica

Cyanobacteria represent a rich resource of a wide array of unique bioactive compounds that are proving to be potent sources of anticancer drugs. Selenium nanoparticles (SeNPs) have shown an increasing potential as major therapeutic platforms and led to the production of higher levels of ROS that can present desirable anticancer properties. Chitosan–SeNPs have also presented antitumor properties against hepatic cancer cell lines, especially the Cht-NP (Chitosan–NPs), promoting ROS generation and mitochondria dysfunction. It is proposed that magnetic fields can add new dimensions to nanoparticle applications. Hence, in this study, the biosynthesis of SeNPs using Alborzia kermanshahica and chitosan (CS) as stabilizers has been developed. The SeNPs synthesis was performed at different cyanobacterial cultivation conditions, including control (without magnetic field) and magnetic fields of 30 mT and 60 mT. The SeNPs were characterized by uv-visible spectroscopy, Fourier-transform infrared spectroscopy (FT-IR), Dynamic light scattering (DLS), zeta potential, and TEM. In addition, the antibacterial activity, inhibition of bacterial growth, minimum inhibitory concentration (MIC), and minimum bactericidal concentration (MBC), as well as the antifungal activity and cytotoxicity of SeNPs, were performed. The results of uv-visible spectrometry, DLS, and zeta potential showed that 60 mT had the highest value regarding the adsorption, size, and stabilization in compared to the control. FTIR spectroscopy results showed consistent spectra, but the increased intensity of peaks indicates an increase in bond number after exposure to 30 mT and 60 mT. The results of the antibacterial activity and the inhibition zone diameter of synthesized nanoparticles showed that Staphylococcus aureus was more sensitive to nanoparticles produced under 60 mT. Se-NPs produced by Alborzia kermanshahica cultured under a 60 mT magnetic field exhibit potent antimicrobial and anticancer properties, making them a promising natural agent for use in the pharmaceutical and biomedical industries.

Effect of water-based electrolyte on surface, mechanical and tribological properties of ZrO2 nanotube arrays produced on zirconium

AbstractIn this work, highly ordered ZrO2 nanotube arrays were fabricated on commercial pure Zr substrates through anodic oxidation in the water-based electrolyte at various voltages (30 V, 40 V and 50 V) for 1 h. The monoclinic- and tetragonal-ZrO2 phases were obtained on ZrO2 nanotubes through anodic oxidation. 13 vibration modes have been observed for the samples grown at low voltages (30 V and 40 V), which are assigned to monoclinic symmetry (7Ag + 6Bg), while—with the increasing growth voltage, the dominant phonon peak intensities associated with the monoclinic symmetry 6 times are decreased, and Eg (268 and 645 cm − 1) mode corresponding to tetragonal symmetry is observed. The nanotube array surfaces exhibited hydrophilic and super-hydrophilic behavior compared to the bare Zr surface. The elastic modulus values of ZrO2 nanotube surfaces (14.41 GPa) were highly similar to those of bone structure (10–30 GPa) compared to bare Zr substrate (120.5 GPa). Moreover, hardness values of ZrO2 nanotube surfaces were measured between ∼76.1 MPa and ∼ 283.0 MPa. The critical load values required to separate the nanotubes from the metal surface were measured between ∼1.6 N and ∼26.3 N. The wear resistance of the ZrO2 nanotube arrays was improved compared to that of plain Zr substrate.

Proteome analysis, genetic characterization, and antibiotic resistance patterns of Klebsiella pneumoniae clinical isolates

Klebsiella pneumoniae (K. pneumoniae) is a member of the ESKAPE group and is responsible for severe community and healthcare-associated infections. Certain Klebsiella species have very similar phenotypes, which presents a challenge in identifying K. pneumoniae. Multidrug-resistant K. pneumoniae is also a serious global problem that needs to be addressed. A total of 190 isolates were isolated from urine (n = 69), respiratory (n = 52), wound (n = 48) and blood (n = 21) samples collected from various hospitals in the Al-Qassim, Saudi Arabia, between March 2021 and October 2022. Our study aimed to rapidly and accurately detect K. pneumoniae using the Peptide Mass Fingerprinting (PMF) technique, confirmed by real-time PCR. Additionally, screening for antibiotic susceptibility and resistance was conducted. The primary methods for identifying K. pneumoniae isolates were culture, Gram staining, and the Vitek® 2 ID Compact system. An automated MALDI Biotyper (MBT) instrument was used for proteome identification, which was subsequently confirmed using SYBR green real-time polymerase chain reaction (real-time PCR) and microfluidic electrophoresis assays. Vitek® 2 AST-GN66 cards were utilized to evaluate the antimicrobial sensitivity of K. pneumoniae isolates. According to our results, Vitek® 2 Compact accurately identified 178 out of 190 (93.68%) K. pneumoniae isolates, while the PMF technique correctly detected 188 out of 190 (98.95%) isolates with a score value of 2.00 or higher. Principal component analysis was conducted using MBT Compass software to classify K. pneumoniae isolates based on their structure. Based on the analysis of the single peak intensities generated by MBT, the highest peak values were found at 3444, 5022, 5525, 6847, and 7537 m/z. K. pneumoniae gene testing confirmed the PMF results, with 90.53% detecting entrobactin, 70% detecting 16 S rRNA, and 32.63% detecting ferric iron uptake. The resistance of the K. pneumoniae isolates to antibiotics was as follows: 64.75% for cefazolin, 62.63% for trimethoprim/sulfamethoxazole, 59.45% for ampicillin, 58.42% for cefoxitin, 57.37% for ceftriaxone, 53.68% for cefepime, 52.11% for ampicillin-sulbactam, 50.53% for ceftazidime, 52.11% for ertapenem, and 49.47% for imipenem. Based on the results of the double-disk synergy test, 93 out of 190 (48.95%) K. pneumoniae isolates were extended-spectrum beta-lactamase. In conclusion, PMF is a powerful analytical technique used to identify K. pneumoniae isolates from clinical samples based on their proteomic characteristics. K. pneumoniae isolates have shown increasing resistance to antibiotics from different classes, including carbapenem, which poses a significant threat to human health as these infections may become difficult to treat.

Fingerprinting of Octane Rating Gasoline and its Contaminants Using Synchronous Fluorescence Spectroscopy.

Fuel fraud has proliferated due to underlying economic advantage in nearly every nation. For the purpose of detecting adulteration and providing real-time quality assurance, non-destructive oil analysis is crucial. This paper reports the simple approach for fingerprinting undiluted petroleum products including gasoline from various brands, diesel, and kerosene oil in comparison with organic solvents using synchronous fluorescence spectroscopy and hierarchical cluster analysis. Fluorescence-based successful detection of adulterated samples is demonstrated in imported RON 92 gasoline, synthetically adulterated with kerosene oil (KO) in proportions up to 70%. Compared to gasoline, kerosene oil has a lower relative poly aromatic hydrocarbons, as the amount of kerosene oil (KO) increases, the KO peak at 352nm rises, but the gasoline's peak intensity decreases in the range of 371-500nm. It is noteworthy that imported fuel grades RON 92 and RON 95 are comparable to each other and surprisingly clustered with RON 91 from the Attock refinery presenting concerns about quality. Similarly, the Shell website mentions that Shell V-Power is RON 99 but interestingly it clusters with retail fuel samples acquired from PSO filling stations and PSO RON 95 showing disagreement with the claim that the fuel is high octane. Another use for this technique in oil exploration was the detection of adulterants and successfully spotted methanol, ethanol, and kerosene oil in the tainted samples. These findings suggest SFS as an accurate, and low-cost testing tool for gasoline fingerprinting and contamination screening.

In situ synthesized highly sensitive AANS@ZIF-8@GZEF constructed flexible SERS sensor for CPS determination

Aiming to meet the demand for rapid detection of chlorpyrifos (CPS), a surface-enhanced Raman scattering (SERS) sensor based on a gluten/zein electrospun film (GZEF) was fabricated via electrospraying. The SERS performance was namely improved through metal nanoparticles selection and optimization of loading amounts. Further construction of the AANS@ZIF-8@GZEF sensor was achieved through in-situ growth. Owning to the porous structure of ZIF-8, the trapping ability and enrichment effect of the SERS sensor were enhanced, resulting in a superior SERS enhancement effect of 1.58 times. Moreover, the CPS detection under various concentrations was carried out using the AANS@ZIF-8@GZEF sensor. The concentration-logarithm peak intensity equations were fitted, and the limit of detection (LOD) of CPS was calculated to be 0.981 μg/L. Finally, the detection of CPS residues on the peel of apples was performed using the AANS@ZIF-8@GZEF sensor, and the results showed that the overall recovery rate ranged between 91.18% and 96.83%, with all relative standard deviations being less than 5%. Great potential applications in the rapid and sensitive detection of chlorpyrifos in food are expected for the AANS@ZIF-8@GZEF sensor constructed in this study.

Glory interference spectroscopy in Sr atom

Slow (meV) photoelectron imaging spectroscopy is employed in the experimental study of near-threshold photoionization of strontium atoms in the presence of an external static electric field. Specifically, the study is devoted to the glory effect, that is, the appearance of an intense peak at the center of the recorded photoelectron images, when dealing with m= 0 final ionized Stark states (m denoting the magnetic quantum number). This critical effect is formally identical to that encountered in classical scattering theory, where, for a nonzero value of the impact parameter, the zero-crossing of the deflection function leads to a divergent classical differential cross section. By recording the magnitude variation of this glory peak as a function of electron excitation energy, we observe that, besides the traces of classical origin, it also exhibits intense quantum interference and beating phenomena, above and below the zero-static-field ionization threshold. We study both, single- and two-photon ionization of Sr, thus enabling a comparison not only between the different excitation schemes, but also with an earlier work devoted to two-photon ionization of Mg atom by Kalaitzis et al (2020 Phys. Rev. A 102 033101). Our recordings are analyzed within the framework of the Harmin–Fano frame transformation Stark effect theory that is applied to both the hydrogen atom and a non-hydrogenic one simulating Sr. We discuss the various aspects of the recorded and calculated glory interference and beating structures and their ‘short time Fourier transforms’ and classify them as either atom-specific or atom independent. In particular, we verify the ‘universal’ connection between the glory oscillations above the zero-field threshold and the differences between the origin-to-detector times of flight corresponding to pairs of classical electron trajectories that end up to the image center.

Flower Extract–Polyvinyl Alcohol‐Based Biocomposites for Sustainable Food Packaging Applications

The proliferation of single‐use plastics has led to widespread pollution and ecological harm, prompting a concerted effort to develop sustainable alternatives. Among them, biocomposite plastic films have emerged as a promising solution for food packing applications. Herein, the preparation of polyvinyl alcohol (PVA) biocomposite films incorporating Clitoria ternatea (CT) flower extracts is reported. The obtained films are subjected to various analytical techniques. Fourier transform infrared spectroscopy analysis reveals the intense peak of hydrogen bonding at 3321 cm−1 in the composite film. CT‐PVA films possess less opacity and UV light‐blocking capabilities. The PVA‐CT films are examined for water absorption, UV barrier, soil degradability, and water‐soluble properties, greater propensity to dissolve in water during the water absorption test is noticed. Enzymatic oxidation followed by hydrolysis of functional groups enhances the soil degradation rate in biocomposite films. Further, the colorimetric study of CT‐PVA solution at different pH shows colored CT–PVA films. From the results and observations, the CT‐PVA biocomposite film (8 mL) proves to be a promising candidate for utilization in the food industry as a packaging material.

Optical probing of ultrafast laser-induced solid-to-overdense-plasma transitions

Understanding the solid target dynamics resulting from the interaction with an ultrashort laser pulse is a challenging fundamental multi-physics problem involving atomic and solid-state physics, plasma physics, and laser physics. Knowledge of the initial interplay of the underlying processes is essential to many applications ranging from low-power laser regimes like laser-induced ablation to high-power laser regimes like laser-driven ion acceleration. Accessing the properties of the so-called pre-plasma formed as the laser pulse’s rising edge ionizes the target is complicated from the theoretical and experimental point of view, and many aspects of this laser-induced transition from solid to overdense plasma over picosecond timescales are still open questions. On the one hand, laser-driven ion acceleration requires precise control of the pre-plasma because the efficiency of the acceleration process crucially depends on the target properties at the arrival of the relativistic intensity peak of the pulse. On the other hand, efficient laser ablation requires, for example, preventing the so-called “plasma shielding”. By capturing the dynamics of the initial stage of the interaction, we report on a detailed visualization of the pre-plasma formation and evolution. Nanometer-thin diamond-like carbon foils are shown to transition from solid to plasma during the laser rising edge with intensities < 1016 W/cm². Single-shot near-infrared probe transmission measurements evidence sub-picosecond dynamics of an expanding plasma with densities above 1023 cm−3 (about 100 times the critical plasma density). The complementarity of a solid-state interaction model and kinetic plasma description provides deep insight into the interplay of initial ionization, collisions, and expansion.