Integration Of Phase Change Materials Research Articles

Design and Implement a BTMS using Phase Change Material - A Review

Abstract: This paper presents a comprehensive review of the design and implementation of Battery Thermal Management Systems (BTMS) utilizing Phase Change Materials (PCM). The thermal management of batteries is crucial for ensuring optimal performance, safety, and longevity, particularly in electric vehicles and renewable energy storage applications. Phase change materials offer unique advantages for thermal management, including high latent heat storage capacity, thermal conductivity, and temperature regulation capabilities. This review discusses the fundamentals of PCM-based BTMS design, including PCM selection, integration methods, and system optimization techniques. Additionally, recent advancements, challenges, and future directions in PCM-based BTMS are explored, providing valuable insights for researchers, engineers, and industry practitioners in the field of energy storage systems.

An improved passive solar still integrated with pulsating heat pipes and phase change materials

This paper presents a theoretical analysis of a novel solar still system, which was previously explored through experimental studies. The experimental results demonstrate that integrating phase change material (PCM) to store latent heat from vapor condensed on sidewalls during sunlight exposure, along with the use of pulsating heat pipes (PHPs) to recover this stored energy after sunset, and cooling the condenser sidewalls with PCM, significantly boosts the system’s efficiency from 23.7 % to 48.5 %. These innovative features, applied for the first time in a single-stage passive solar still, are thoroughly examined using a groundbreaking mathematical model. This model is the first to uniquely account for heat transfer and condensation on sidewalls and to accurately simulate the function of pulsating heat pipes (PHPs) within a passive solar still setup. By incorporating measured radiation intensity and ambient temperatures, the model applies an exhaustive energy balance, utilizing heat transfer correlations and resistances for precise temperature predictions of each component. This detailed analysis highlights the system’s innovative aspects and identifies areas for further refinement, shedding light on potential improvements and the system’s limitations. The results show a water production of 6.7931 kg/m2 and an efficiency of 52.2 %, with a discrepancy of 7.8 % compared to experimental findings. Notably, 37.6 % of the total freshwater production is derived from sidewall condensation, significantly reducing heat loss by capturing latent heat. Additionally, by reallocating 9.3 % of stored energy, the PHPs maintain the saline water temperature 6.2 degrees higher at night, thereby sustaining elevated production rates.

Experimental assessment of the heat shielding performance by the integration of phase change material and liquid cooling plate

This research focuses on innovative stealth equipment by integrating a liquid cooling plate and phase change material (PCM), and the temperature rise on the cold surface and PCM melting rate is reported to illustrate the PCM thermal behavior in lifting the heat shielding performance. Results show that the integrated PCM system is effective in delaying the temperature rise within a certain time. A slower temperature rise on the cold surface is found at the first 1200 s, and a significant acceleration in the temperature rise is given within 1200 s ∼ 2000 s as the heat flood breaks through the PCM layer. The PCM melting rate increases rapidly and then rises slowly, and the complete melting time is shortened as increasing heat power. The heat shielding performance is significantly reduced with increasing the liquid flow rate, and the influence of the coolant temperature on the temperature rise becomes more and more prominent as the completion of the PCM melting process. A slower temperature rise is observed at the lower PCM phase transition temperature, and a further increase in the PCM covering layer has little influence on the temperature rise at the initial stage.

Residential Micro-CHP system with integrated phase change material thermal energy storage

This paper presents an analysis and experimental investigation of the effect of integrating Phase Change Material (PCM) within a heat exchanger within a Micro Combined Heat and Power (Micro-CHP) system intended for residential applications. A commonly used Micro-CHP layout is replicated in a test rig to characterise the performance of two alternative heat exchanger arrangements. The first is a conventional arrangement where the exhaust gas produced by the prime mover is directed to an air-to-water heat exchanger to heat water and store it in a tank. In the second arrangement, PCM material is encapsulated within specially designed compartments in a heat exchanger to store part of the exhaust thermal energy from the prime mover while heating the water in the storage tank. The time needed to heat the water and discharge heat is compared for both cases, as well as the amount of thermal energy stored during the same operating period. The study also explored the potential to improve the designed unit by using different PCM materials. The test results show that adding 4.7 L capacity paraffin compartments within the heat exchanger extended the discharge time of the hot water by over 400 %, which reflects a marked improvement in the heat storage capacity of the system. This would result in a significant increase in the viable operating period of a CHP system. The one-dimensional analysis revealed that replacing the paraffin with ClimSel C58 PCM can reduce the charging time of the water tank by around 54 % improve the heat storage capacity by factor of 2.35 comparing to Paraffin. The proposed heat exchanger with encapsulated PCM has a potential in other applications such as storage of excess renewable energy or integration with heat pumps to improve matching of supply and demand and thus flexibility of an energy system with integrated intermittent renewables.

A Comparative Model of Thermal Performances Between a Modern and Classic Habitat for A Hot and Humid Tropical Climate: Case of Guinea

The objective of this research is to carry out a comparative study between a classic habitat and a modern habitat in order to understand which of the two is more efficient for a humid tropical area. To do this, a digital modeling of the heat transfer phenomena in the different components of the habitat was highlighted for a habitat made of stabilized earth bricks, a roof made of transparent tiles, false ceilings made of rectangular panels containing phase change material, concrete floor and a classic habitat made from local materials is presented. To show the reliability of this study, we validated our habitat model integrating phase change material through an experimental study carried out by researchers B. ZIVKOVIC and I. FUJII. A study on the temperature distributions at the level of certain components of the habitat done, and the influence of the variation of certain parameters was highlighted to know the thermal behavior of the two habitats. Furthermore, a comparative study was performed between the interior and exterior temperatures of the south walls of habitats incorporating PCM and without PCM, which are the components most exposed to solar radiation whose maximum values are respectively 33°C and 34, 5°C and 33.15°C against 47°C. Keywords: Performances, thermal, bioclimatic, PCM, Tropical climate, Guinea.

Sandwiched solar interfacial evaporation system: Integrating phase change material/hydrogel/NiCo2O4 nanoflower for superior desalination

Solar-driven interfacial evaporation is a kind of sustainable and eco-friendly method of water treatment to alleviate the global water crisis. Here we demonstrate a novel sandwiched solar interfacial evaporator integrating phase change material (PCM), sodium alginate hydrogel (SA), and NiCo2O4 nanoflower featuring superb evaporation and glorious thermal energy management to achieve efficient energy utilization and long-term evaporation stability. After being combined with filter paper, NiCo2O4 nanoflower composites are adopted as the light absorber on the top layer, which can achieve an absorption of about 96.5 % in the full spectral range. SA hydrogel has been used as an intermediate layer for rapid water supply to the evaporation interface and to prevent salt deposition. Under one sun irradiation (1 kW m−2), the evaporator exhibits a high evaporation rate (1.94 kg m-2h−1) and excellent endurance in the treatment of high salt-concentration water. In particular, benefiting from the rational combination of PCM, the water production reached up to 12.13 kg m−2, which is 2.23 kg m-2higher than that of the evaporator without PCM under natural solar irradiation for 9 h. This work presents a promising concept for maximally utilizing intermittent solar irradiation energy and prolonged salt-free deposition desalination.

Numerical and experimental analysis of battery thermal management of 21700 Nickel Manganese Cobalt lithium-ion battery

High discharge rates in 21700 NMC Lithium-Ion Batteries (LIBs) leads to elevated temperatures, negatively impacting battery performance and longevity. This study examines the integration of phase change materials to address this issue. Phase change materials absorb heat through sensible and latent heat mechanisms, effectively reducing battery temperature. At discharge rates of 0.5 C, 1 C, and 1.5 C, phase change materials decreased battery temperature by 4.12 %, 7.32 %, and 8.16 %, respectively, ensuring optimal operating conditions. Incorporating phase change materials within battery modules minimizes cell spacing, leading to a smaller battery pack size and reduced costs. This compact design is achieved by exploiting phase change materials ability to store and release large amounts of heat while maintaining a nearly constant temperature. Furthermore, analyzing temperature variations across diverse surfaces within battery modules provides valuable insights for cooling technology development. The integration of Phase Change Materials effectively regulates temperatures, particularly under high discharge rates, offering significant implications for battery performance and longevity. This study highlights the potential of phase change materials in improving LIBs thermal management, which is crucial for electric vehicle applications and other high-power-demand scenarios. By addressing temperature-related challenges, phase change materials integration contribute to the advancement of more efficient, reliable, and safer LIBs.

Enhancing cold energy harvest with daytime passive radiative cooling and phase change materials integration: A numerical exploration

Daytime passive radiative cooling (DPRC) is an emerging technology to dissipate heat to the ultimate cold sink, the universe, with zero energy input. However, the achieved cold surface temperature of an object by DPRC can readily increase close to the ambient temperature. Sensible heat readily induces changes in the temperature of objects, but it generates a heat leakage path to surroundings with the largely varying temperature gradients. To address the challenge, we designed a DPRC coating integrated with phase change materials (PCM) so as to harvest and store the cold energy, respectively from the universe. To evaluate the feasibility of this concept, a numerical model, which integrates a self-programmed MATLAB code to calculate the net cooling power and a FLUENT-assisted enthalpy-porosity method to simulate the phase change process, was developed and validated. Also, the cold energy harvesting performance of the proposed device was explored under different climate types and conditions. We found that the surface temperature of the PCM with a DPRC coating can be reduced to −15.9 °C and −4.5 °C in a day in the temperate continental climate and the subtropical desert climate, respectively, when the non-radiative heat transfer is completely avoided. The temperature difference in the PCM is less than 1.0 °C when aluminum fins are added to enhance the heat transfer performance of the PCM. This study provides new insights into the continuous steady cooling of DPRC using PCMs, and the harvested cold energy can be used to cool water for the condenser of an air conditioner to save energy consumption

Simulation of storage of cold energy considering unsteady conduction mechanism in mathematical model

To enhance system productivity, fins were incorporated into the container, and PCM (phase change material) infused with alumina nanoparticles was introduced. Mathematical modeling was employed to evaluate the current problem, with a specific focus on utilizing water as the PCM for achieving the fastest solidification process. The integration of fins, PCM, and nano-powders introduces a novel dimension to the research, providing unique insights into enhancing solidification processes. The surrounding cold walls of the container play a crucial role in solidification, primarily through conduction. The low speed of H2O allows its neglect in simulation. The developed mathematical model for this work comprises two equations. While considering larger powder sizes improves particle interaction, the negative impact of sedimentation diminishes conductivity. The addition of nanoparticles results in a 41.34% enhancement in the solidification rate. Furthermore, altering the powder diameter from thirty to 40 nm reduces the completion time about 19.98%, whereas an increase from 40 to 50 nm elevates it by about 49.37%.

Experimental analysis of building envelope integrating phase change material and cool paint under a real environment in autumn

The application of phase change material (PCM) and cool paint (CP) to building envelope is one of the effective solutions to improve thermal comfort of passive buildings. Therefore, the thermal performance of buildings in Hefei, China in autumn is compared and analyzed by integrating PCM and CP into the building envelope. According to the comprehensive analysis of indoor thermal environment and the ability to maintain indoor thermal comfort, it is concluded that the combined application of PCM and CP is better than the application of PCM or CP alone. And the combination of PCM and CP laid on the south wall and roof respectively is the best. It is more suitable for commercial buildings, which can prolong indoor air temperature (Ti) in the thermal comfort zone for more than 10 hours during the day. The combination of PCM and CP laid on the roof can prolong Ti in the thermal comfort zone for more than 8.05 hours, which is more suitable for residential buildings. The purpose is to explore the best combination mode of residential and commercial buildings according to the characteristics of temperature change and building types (according to people's main use time) in the real environment.

Enhancing thermal performance of cylindrical Li-ion battery packs: A 3D simulation with strategic phase change material integration and airflow control

This study conducts a three-dimensional simulation of the temperature of a cylindrical Li-ion battery (LIB) pack with nine cells. The cells are arranged in the pack in square and diamond configurations, and the pack is filled with phase-change materials (PCMs). The airflow enters the channel from two inlets at 90° with respect to the pack and is guided by two blades at the sides of the inlet toward the pack. Arc-shaped and linear blades were used for this study, which was carried out for 2500 s. The results indicate that the square arrangement of batteries, combined with the use of curved blades, has been more effective in reducing temperature. In this configuration, a more uniform distribution of air flow and better efficiency of the PCM in absorbing heat were observed, leading to a significant decrease in the overall temperature of the battery pack. Specifically, compared to the diamond arrangement, the temperature of the batteries in the square arrangement was up to 10 °C lower. This reduction in temperature plays an important role in enhancing the lifespan and safety of the batteries. By using machine learning and providing the optimal model for the maximum temperature of the battery surface, it was shown that this parameter was designed with the model and comparing it with the numerical results had an error of 2.01 %.

Optimizing the characteristic cooling curves of PCM-integrated thermally active buildings: Experimental and numerical investigations

Phase change materials (PCMs) exploit their cyclic phase change (solidification and melting) to enable latent heat storage. While incorporating them in thermally activated building systems can potentially enhance energy savings and thermal comfort, they can introduce significant challenges to the building energy management system. This work first reports the result of small-scale side-by-side experiments on two thermally active cuboids with and without BioPCMs at different supply water and PCM melting temperatures, as well as irradiance levels. Next, a dynamic model is developed in TRNSYS v18.05 for a typical design of an office space under hot desert climate conditions. The model is then integrated into a multi-objective optimization routine using NSGA-II algorithms to identify the optimal characteristic cooling curves, melting temperatures, and PCM thicknesses that simultaneously minimize energy consumption and maximize the percentage of comfortable hours. The experimental observations of the PCM-integrated cuboid highlighted energy savings between 80.45 and 84.56 %, compared to the reference cuboid, at nearly the same levels of indoor temperatures. The PCM panels reduced the cooling capacity of the radiant floor but also dampened air temperature variations by up to 83.17 %. Besides, higher solar irradiance levels, encountered in desert areas, were found to enhance the cooling capacity by up to 46.8 %. The Pareto solutions highlighted the possibility of achieving acceptable unmet hours of 3.16 % using PCMs and without the need for an assisting air system, compared to 14.1 % without PCMs. Besides, at the same unmet hours of the reference system, the PCMs reduced the total energy consumption and the peak cooling power by 9.75 and 41.2 %, which translates into substantial operation and capital investments, respectively. Moreover, the study demonstrated by example the importance of calibrating the commonly used cooling curves of thermally active buildings when planning for PCM integration.

Thermal energy storage performance of biaxial voided RCC roof slab integrated with macroencapsulated PCM for passive cooling of buildings

Building space heating and cooling power consumption is growing due to population and economic growth. Integrating phase change materials (PCMs) into various building envelope components is being explored to enhance thermal energy storage capacities. Specifically, roofs exposed to direct sunlight significantly promote thermal energy transfer to the interior, increasing the space heating and cooling requirements. In this study, thermal energy storage performance of a biaxial voided roof slab integrated with PCM is experimentally investigated under ambient conditions and compared with a normal reinforced concrete (RCC) without PCM. PCM selection, characterization, and metal void former development are performed, followed by macroencapsulation and integration into the roof slab. Thermal performance measures are evaluated, including temperature profile, heat flux, thermal load, time lag, and decrement factor. Financial viability indicators such as electricity cost savings, payback period, and CO2 emissions savings are also assessed. The results show PCM integrated biaxial voided roof slab reduces interior temperature by upto 7.2 °C during sunny hours, heat transfer to the interior by upto 60.6 %, and thermal load by upto 54 %. In addition, considering heating and cooling, it offers an average daily saving of 0.06 USD/kWh/m2 and a payback period of about 5.7 years. Further, it gives CO2 emissions savings of upto 13.7, 12.3, and 4.3 kgCO2/kWh for lignite-, coal-, and natural gas-fired power plants. Furthermore, its mean time lag is 4.2 h, with a decrement factor of 0.75 compared to 3.9 h and 0.85 for the normal RCC unit. The study makes significant contribution to knowledge by providing a unique, simple yet highly effective PCM macroencapsulation integration technique for roof slabs and insights into its thermal performance under the hot weather conditions.

Experimental and numerical study on the thermal performance of earthbag-wall units incorporated with phase change materials

The demand for temporary housing for refugees and displaced communities has led to the development of earthbag buildings. While these structures are affordable and sustainable, they often struggle with thermal discomfort in extreme climates. This study aims to examine the integration of phase change materials (PCM) into earthbag walls to improve thermal performance. The research involved incorporating paraffin wax and microencapsulated PCM into scaled-down earthbag walls, with their performance evaluated in a controlled environment. The results were validated against a numerical simulation model developed in EnergyPlus. The study revealed significant thermal improvements with PCM integration. Wall-2, with paraffin wax A31, demonstrated a surface temperature reduction of up to 1.9 °C, while Wall-3, with microencapsulation Inertek26, showed a decrease of 2.4 °C compared to the reference wall. A parametric analysis highlighted the importance of PCM layer thickness. Specifically, Wall-2 with a 6 cm paraffin wax layer achieved a maximum reduction of 4.0 °C compared to the base case. The study identified the transition temperature of PCM as a critical factor in thermal performance, with paraffin wax A31 emerging as the optimal choice. Placing the PCM layer on the interior surface of the wall was more effective than exterior placement. Overall, PCM integration in earthbag walls offers a promising solution to enhance thermal comfort in temporary housing, addressing the critical needs of refugees and displaced communities. This research fills existing gaps in thermal comfort in temporary housing and demonstrates the potential of PCM as an innovative passive design strategy.

Evaluating Future Building Energy Efficiency and Environmental Sustainability with PCM integration in Building Envelope

The energy demand in the building sector is anticipated to increase with climate change and the high energy consumption is responsible for releasing enormous amounts of CO2 into the environment, intensifying climate change. Phase change material (PCM) integration into the building envelope has a high potential to reduce the building's energy demand without compromising environmental sustainability. This research investigated the impact of PCMs (PCM 18–PCM 30) on building cooling, heating, and annual energy efficiency for future climate scenarios (2095) in 13 different climate zones worldwide. For this purpose, the Fanger comfort model was implemented and numerical simulations were performed using Energyplus. The performance of PCM was evaluated using novel Predicted Mean Vote fluctuation reductions (PMVFR), and the Total Predicted Mean Vote drop (TPMVD). Further, for the first time, a time series-forecasting model for the estimation of CO2 emissions originating from various energy production sources in the future was developed using gene-expression programming (GEP) algorithm. Finally, the two different maps showing the PCM efficiency for energy conservation and environmental sustainability at the global level are presented. The results evidence a maximum of 12.9% reduction in annual energy demand in the future with the integration of PCM. The GEP-based prediction model demonstrated good accuracy as determined by the statistical parameters and satisfied the external validation requirements. The environmental analysis exhibits that PCM integration can reduce carbon emissions up to 204 CO2-e Kg/year. Overall, the integration of PCM is regarded as a sustainable solution for building energy efficiency, considering climate change.

Analysis of Solar Water Heater with Modification Absorber Plate Integrated Thermal Storage

In various countries worldwide, solar water heater systems (SWHs) are utilized as devices that harness solar energy as a primary energy source. This study investigates the performance of SWHs numerical simulation by integrating phase change material (PCM) paraffin wax onto an absorber plate collector at the bottom for thermal storage. This study presents the thermal performance of a SWHs that uses an absorber plate with PCM for thermal energy storage. In this test, four variations of the model tested, namely a) standard flat plate (SFP), b) standard flat plate with PCM storage thickness 10mm (SFP+PCM 10mm), c) standard flat plate with PCM storage thickness 7mm (SFP+PCM 7mm), and d) standard flat plate with PCM storage thickness 4mm (SFP+PCM 4mm), were investigated using numerical simulation. Initially, an analytical investigation was conducted to examine the material qualities of paraffin wax utilised for phase change material (PCM) storage. The SWH systems were subsequently imported and simulated under three different levels of continuous solar radiation: 400 W/m2 700 W/m2 and 1000 W/m2. The simulation incorporates the use of computational fluid dynamics (CFD) tools. The results of the study revealed that the collector of the SWH system, which utilised an absorber plate containing phase change material (PCM) storage, demonstrated exceptional performance. Models with a thickness of 7mm PCM or SFP+PCM 7mm have the highest efficiency compared to other models with an efficiency value of 64%. There is a 3-4% increase in efficiency with variations in models that use PCM thermal storage compared to models that do not use PCM thermal storage.

Enhancing reliability and efficiency of solar chimney by phase change material Integration: An Experimental study

The Solar Chimney Power Plant (SCPP) presents an eco-friendly and straightforward technique for converting solar radiation into electricity. However, the performance limitations and reliability challenges of SCPPs are inherently linked to the variability and intermittency of solar radiation. To tackle this issue, using phase change materials (PCMs) can enhance the thermal energy storage and release capabilities of SCPPs. This study aims to explore the impact of PCM on the exergy efficiency and performance of a solar chimney. Two pilot solar chimneys with identical dimensions were constructed, each featuring a 4 m height chimney and a 5 m diameter collector. One solar chimney was equipped with hydrated salt PCM as an energy storage layer, while the other operated without PCM. Both systems' power production and ventilation potential were evaluated using theoretical turbines, and subsequent exergy analysis discerned the operational behavior and efficiency of the systems. Results indicate that PCM increased the average air mass flow rate through the solar system during the day. The average daily air mass flow rate was 0.045 kg/s with PCM and 0.033 kg/s without PCM. Notably, mean pressure drops resulting from the airflow through the turbine were 2.44 and 1.83 Pa in the presence and absence of PCM, respectively, over a complete day. Additionally, PCM improved exergy efficiency by about 19 % due to enhanced thermal energy storage.

Monolithic back-end-of-line integration of phase change materials into foundry-manufactured silicon photonics

Monolithic integration of novel materials without modifying the existing photonic component library is crucial to advancing heterogeneous silicon photonic integrated circuits. Here we show the introduction of a silicon nitride etch stop layer at select areas, coupled with low-loss oxide trench, enabling incorporation of functional materials without compromising foundry-verified device reliability. As an illustration, two distinct chalcogenide phase change materials (PCMs) with remarkable nonvolatile modulation capabilities, namely Sb2Se3 and Ge2Sb2Se4Te1, were monolithic back-end-of-line integrated, offering compact phase and intensity tuning units with zero-static power consumption. By employing these building blocks, the phase error of a push-pull Mach–Zehnder interferometer optical switch could be reduced with a 48% peak power consumption reduction. Mirco-ring filters with >5-bit wavelength selective intensity modulation and waveguide-based >7-bit intensity-modulation broadband attenuators could also be achieved. This foundry-compatible platform could open up the possibility of integrating other excellent optoelectronic materials into future silicon photonic process design kits.

Preparation and characteristic of palmitic acid/flower-shaped CuS composite phase change material for effective heat storage and photothermal conversion

Designing and synthesizing the excellent heat storage and photothermal integrated composite phase change materials (PCMs) is an effective strategy for solar energy utilization. This work focuses on two kinds of CuS (cuboidal and 3D flower-shaped) with different morphology were designed as substrates and photothermal materials, and PA/F–CuS and PA/C–CuS composite PCMs have been prepared by melt-blending and vacuum impregnation method. Through SEM and pore structure characterization as well as leakage testing, it is proved that 3D layered flower-shaped CuS not only exposes the large specific surface area and rich adsorption sites, but also 2D thin layers can perform multiple reflections to improve the utilization rate of solar energy. The flower-shaped CuS is more suitable for the supporting material. Noteworthy, the latent heat of PA/F–CuS can reach 226.3 J/g, and the thermal conductivity is 0.3447 W/(m·K). Furthermore, compared with pure PA, the photothermal property of PA/F–CuS increased by 49.22–84.59%, and the photothermal conversion efficiency can reach 70.3%. This work provides an innovative idea for the design and manufacture of composite PCMs related to medium and low temperature solar energy storage, and has broad application potential in the field of thermal energy storage such as solar energy utilization and building insulation materials.

Integration of Phase Change Materials in Service Areas of Building Envelopes for Improved Thermal Performance: An Experimental Study in Saudi Arabia

This experimental study explores the integration of Phase Change Materials (PCMs) within building envelopes. The research specifically centers on the utilization of two microencapsulated paraffin-based PCMs with melting points of 37 °C and 43 °C. The study assesses their performance within cement and gypsum-based PCM composites, concentrating on service areas often overlooked in thermal analysis, including underground garages, staircases, and utility rooms. The experimental setup included constructing three chambers inside an underground garage during the hot months of June and July in Saudi Arabia. Two chambers were assigned to integrate the PCM, while the third chamber served as a control without PCM. The experiment unfolds in two phases. In the initial phase, the objective was to determine which PCM is more effective in reducing the heat load inside the chambers. This led to the adoption of the 43 °C PCM for the subsequent stage. The adoption of the 43 °C PCM resulted in a fourfold decrease in heat compared to the 37 °C PCM. The second phase investigates the integration of the selected PCM with cement and gypsum composites. The percentage of PCM incorporated into the concrete and gypsum composites was determined experimentally. For cement-based composites, the identified percentage that maintains material integrity is 20%, and for gypsum-based composites, it is 22%. The findings demonstrate a significant reduction in cooling load with PCM incorporation, with cement-based composites exhibiting superior thermal performance compared to gypsum-based alternatives and reducing the heat load by approximately 63%. Additionally, it was observed that concrete reduced the highest temperature during the day by 5.2 °C, which equates to about a 10% reduction, further enhancing comfort. Conducted over the course of two summer seasons, this study contributes valuable insights toward improving the quality of life for building occupants, considering various factors such as their living environment.