Insulator Materials Research Articles

Investigation of the Electrical Characteristics of AlGaN/AlN/GaN Heterostructure MOS-HEMTs with TiO2 High-k Gate Insulator

This paper investigates the impact of TiO2 high-k gate insulator on the electrical characteristics of AlGaN/AlN/GaN MOS-HEMT transistors using MATLAB and Atlas-TCAD simulation software. The physical analytical model of the MOS-HEMTs is used for simulation from Al2O3, HfO2, and TiO2 as the gate dielectric materials, which provide higher performance and reliability of the MOS-HEMT devices. The device shows a good improvement in its result of the DC and AC characteristics with different permittivity of insulator materials. Thus, the DC and AC performance of GaN MOS-HEMTs is higher than with other insulators, such as Al2O3 and HfO2 by using TiO2 as the gate dielectric. Moreover, the simulation results proved that TiO2 is the better gate dielectric material to enhance the electrical reliability of the power switching devices for high-temperature applications such as electric automobiles.

Novel dopant-free ferromagnetic Mott-like insulator and high-energy correlated-plasmons in unconventional strongly correlated s band of low-dimensional gold

Ferromagnetic insulators and plasmons have attracted a lot of interest due to their rich fundamental science and applications. Recent research efforts have been made to find dopant-free ferromagnetic insulators and unconventional plasmons independently both in strongly correlated electron systems. However, our understanding of them is still lacking. Existing dopant-free ferromagnetic insulator materials are mostly limited to complex d- or f-systems with extremely low Curie temperature, low-symmetry structure, and strict growth conditions on specific substrates, limiting their compatibility with industrial applications. Unconventional plasmon is, on the other hand, a quasiparticle that originates from the collective excitation of correlated-charges, yet they are rarely explored, particularly in ferromagnetic insulator materials. Herewith, we present a novel, room temperature dopant-free ferromagnetic Mott-like insulator with a high-symmetry structure in unconventional strongly correlated s band of low-dimensional highly oriented single-crystal gold quantum dots (HOSG-QDs) on MgO(001). Interestingly, HOSG-QDs show new high-energy correlated-plasmons with low-plasmonics-loss. With a series of state-of-the-art experimental techniques, we find that the Mott-insulating state is tunable with surprisingly strong spin-splitting and spin polarization accompanied by strong s–s transitions, disappearance of Drude response, and generating new Mott-like gap. Supported with a series of theoretical calculations, the interplay of quantum confinement, many-body electronic correlations, and hybridizations tunes electron–electron correlations in s band and determines the ferromagnetism, Mott-like insulator, and high-energy correlated-plasmons. Our result shows a new class of room temperature dopant-free ferromagnetic Mott-like insulator and high-energy correlated-plasmons with low-loss in strongly correlated s band and opens unexplored applications of low-dimensional gold in spin field-effect transistors and plasmonics.

EIS Behavior of Polyethylene + Graphite Composite Considered as an Approximation to an Ensemble of Microelectrodes

The electrical percolation of alternating current through two-phase polyethylene/graphite composite electrodes with different contents of graphite microparticles immersed in aqueous KCl solutions has been studied. Above the graphite content of the first percolation threshold, the electrochemical impedance response of this electrode is associated with an equivalent circuit of resistance Ru in series with a constant phase element (CPE). An insulator material + conducting filler model is proposed in which the electroactive surface is considered as the intersection of the percolation cluster through the solid and the cluster associated with the interfacial region. CPE is analyzed assuming a distribution of microcapacitors of the graphite particles in contact with the dielectric solution and inside the dielectric polymeric phase.

Electrochemical Platform Based on the Bi2Te3 Family of Topological Insulators for the Detection of SARS-CoV-2 Pathogenic Factors.

Accurate and rapid detection of the causative agent of a disease is of great importance in controlling the spread of the disease. This work developed a biosensor with the Bi2Te3 family of topological insulators for detection of the SARS-CoV-2 virulence factor. The Bi2Te3 family is a three-dimensional topological insulator material with topologically protected surface states; the presence of these surface states facilitates charge transfer between the electrode and electrolyte interface. Compared with the detection performance of Bi2Se3, BiSbTeSe2, and a trivial insulator like Sb2Se3, Bi2Te3 exhibits superior characteristics. A Bi2Te3 electrochemical detection platform is utilized to fabricate a sensor that can detect SARS-CoV-2 DNA, RNA, and antigen for label-free target detection. The concentration range of DNA detection by the biosensor using Bi2Te3 is between 1.0 × 10-15 and 1.0 × 10-10 M, and the detection limit can reach 1.41 × 10-16 M. Furthermore, it exhibits excellent selectivity and maintains good stability even after being stored for 14 days. This study provides a new way to apply topological insulator materials in the field of biosensors and use their unique electronic structure to improve the accuracy and speed of disease detection and diagnosis.

Enhancement of spin Hall angle in semimetallic materials α -Sn under voltage regulation

Utilizing current-induced spin–orbit torque (SOT) to control magnetization is essential for the advancement of spintronics. SOT offers high energy efficiency and rapid operation speed. The ideal SOT material should have a high charge-to-spin conversion efficiency and excellent electrical conductivity. Recently, there has been a focus on topological insulator materials with topological surface states in SOT research due to their controllability in spin–orbit coupling, conductivity, and energy band topology. While topological Dirac semimetallic materials show promise for SOT applications, research on voltage regulation of their spin Hall angle is still in its early stages. This paper investigates the multilayer structure of a Dirac semimetallic material. In an α-Sn/Ag bilayer, the voltage regulation effect can increase the spin Hall angle by five times by adjusting the strain on the Fermi level. Experiments explore the role of a silver layer as a transport layer in the electric field control of multilayer films. This material system can enhance its effects under electric field regulation and offer insight for achieving regulation in new spintronic devices.

Induced superconducting correlations in a quantum anomalous Hall insulator

Thin films of ferromagnetic topological insulator materials can host the quantum anomalous Hall effect without the need for an external magnetic field. Inducing Cooper pairing in such a material is a promising way to realize topological superconductivity with the associated chiral Majorana edge states. However, finding evidence of the superconducting proximity effect in such a state has remained a considerable challenge due to inherent experimental difficulties. Here we demonstrate crossed Andreev reflection across a narrow superconducting Nb electrode that is in contact with the chiral edge state of a quantum anomalous Hall insulator. In the crossed Andreev reflection process, an electron injected from one terminal is reflected out as a hole at the other terminal to form a Cooper pair in the superconductor. This is a compelling signature of induced superconducting pair correlation in the chiral edge state. The characteristic length of the crossed Andreev reflection process is found to be much longer than the superconducting coherence length in Nb, which suggests that the crossed Andreev reflection is, indeed, mediated by superconductivity induced on the quantum anomalous Hall insulator surface. Our results will invite future studies of topological superconductivity and Majorana physics, as well as for the search for non-abelian zero modes.

Exchange bias in heterostructures combining magnetic topological insulator MnBi2Te4 and metallic ferromagnet Fe3GeTe2

Introducing magnetism into topological insulators enables exotic phenomena such as quantum anomalous Hall effect. By fabricating van der Waals (vdW) heterostructures using layered magnetic materials, we can not only induce a gap in the non-magnetic topological surface states through magnetic proximity but also further manipulate the magnetic properties of magnetic topological insulators. However, the scarcity of 2D ferromagnetic insulator materials limits the fabrication of such heterostructures. Here, we demonstrate the vdW heterostructure devices comprising metal ferromagnetic Fe3GeTe2 nanoflakes and few-layer antiferromagnetic topological insulator MnBi2Te4 separated by an insulating hexagonal-boron nitride spacer. These devices exhibit significant exchange bias with the exchange bias field of over 100 mT under certain conditions. Our results prove that besides magnetic insulators, metallic magnets can also effectively adjust the magnetic properties of topological insulators, thereby inspiring diverse configurations of the heterostructures between topological insulators and magnetic materials.

Double ferromagnetic barriers resonant tunneling diodes (RTD) based on the surface of a topological insulator

Resonant tunneling diodes (RTDs), which are based on double barrier quantum well structures, are typically achieved by combining different materials with varying band gap sizes. However, this approach often poses challenges such as material mismatching and dislocations. In this study, we present a novel resonant tunneling diode scheme utilizing the unique properties of topological insulator materials. Specifically, we exploit the gap opening in the band structure of the topological insulator by employing perpendicular magnetization. In this proposed RTD platform, the barrier regions are formed from a ferromagnetic topological insulator through the proximity effect. By adjusting the thickness and spacing of the ferromagnetic barriers, a well region with confined states emerges between the barrier regions. Theoretical analysis reveals that by tuning the back gate voltage, the I-V characteristics exhibit two significant behaviors: negative differential resistance (NDR) and step-like behavior for Fermi energy values of EF = −3 and EF = 3, respectively. Furthermore, we observe an increase in the peak-to-valley ratio (PVR) with higher magnetization values. Notably, the PVR reaches a value of 7.13 for a magnetization value of m = 9. Additionally, we investigate the influence of the well width and barrier thickness on the transport properties of the device.

Identification of the effect of electric pulse discharges on the recycling of household glass

The work was devoted to the study of the recycling of household glass waste by the electric pulse method. Cullet and glass containers were considered as the object of research. Cullet and used glass containers are considered suitable for recycling among solid household waste. The treatment of solid household waste was carried out with the formation of electrical discharges in an inhomogeneous environment (glass fragments and glass products in an aqueous environment). The experiments were carried out at different values of pulse discharge voltage (from 12 kV to 37 kV), capacitor bank capacity (from 0.4 to 1.2 µF), number of pulse discharges (from 250 to 1,000) and frequency (from 0.3 Hz to 2 Hz). The dependence of the output of the finished product on the parameters of electric pulse discharges has been revealed from the research results. According to the main results of the research work, it was found that as the parameters of electric pulse discharges increase, the yield of the finished product increases. The data made it possible to assign effective parameters for processing cullet and glass products using the electric pulse method. The granulometric composition of the powder material obtained by this method has been determined. A product with a diameter of the largest fraction of 5-8 mm and a diameter of a small fraction of 0.4 mm and 0.7 mm was obtained. The results of the experiment can be used in research on saving natural resources, energy conservation and solving environmental problems of solid waste recycling. Powdered glass is used as a thermal insulator and decorative material in construction. In addition, crushed glass is used in the production of concrete as an additional raw material.

Application of femtosecond mode-locked SnTe thin films and generation of bound-state solitons

In the realm of ultrafast laser technology, the exploration of two-dimensional materials as saturable absorbers (SA) has garnered significant research interest. Our research investigates the characteristics of SnTe thin films, a topological crystalline insulator material, as a potential saturable absorber for ultrafast lasers. Using the molecular beam epitaxy (MBE) technique, we analyze the films’ morphology and composition through atomic force microscopy (AFM) and successfully deposit SnTe epilayers on Au(111)/mica substrates. Through the utilization of SnTe-SA, an erbium-doped fiber laser is fabricated, demonstrating a pulse output with a width of 276 fs and a center wavelength of 1560 nm, highlighting the potential of SnTe films in manufacturing ultrafast optical devices. Additionally, tightly bound solitons with a soliton interval of 1.01 ps are observed, contributing to the exploration of soliton nonlinear dynamics.

Charge interaction behaviors at interfacial domains in DC GIL insulators

Long-term operation of high voltage direct current at elevated temperatures can result in the accumulation of surface charges in DC gas-insulated transmission line (GIL) insulators. Such a phenomenon leads to localized electric field distortion, increasing the risk of surface discharge. The analysis of interaction behaviors between surface charge and space charge at interfacial domains of GIL insulators is a complex task, which requires a comprehensive understanding of physical mechanisms of the gas–solid interface charging. In this work, a two-dimensional bipolar charge transport and interaction (2D BCTI) model is established, with the consideration of both surface and space charge dynamics. Pulsed electroacoustic tests and surface potential measurements are conducted on DC GIL insulator materials under different electrical-thermal coupling conditions. Experimental results exhibit great consistency with the predictions from the 2D BCTI model. The local accumulation of space charge near interfaces has certain effects on surface potential distribution, which in turn influences charge injection behavior from electrodes. In comparison to traditional surface charge simulation models, the consideration of space charge–surface charge interaction behaviors proves to be essential for estimating the polarity and amplitude of surface potential distribution. This model holds promise for assessing charge characteristics in electrical equipment where direct measurement is challenging.

Transition metals of Pt and Pd on the surface of topological insulator Bi2Se3.

Transition metal catalysts supported on topological insulators are predicted to show improved catalytic properties due to the presence of topological surface states, which may float up to the catalysts and provide robust electron transfer. However, experimental studies of surface structures and corresponding catalytic properties of transition metal/topological insulator heterostructures have not been demonstrated so far. Here, we report the structures, chemical states, and adsorption behaviors of two conventional transition metal catalysts, Pt and Pd, on the surface of Bi2Se3, a common topological insulator material. We reveal that Pt forms nanoparticles on the Bi2Se3 surface. Moreover, the interaction between Pt and surface Se is observed. Furthermore, thermal dosing of O2 onto the Pt/Bi2Se3 heterostructure leads to no oxygen adsorption. Detailed scanning tunneling microscopy study indicates that Pt transforms into PtSe2 after the thermal process, thus preventing O2 from adsorption. For another transition metal Pd, it exhibits approximate layer-island growth on Bi2Se3, and Pd-Se interaction is also observed. Our work provides significant insights into the behaviors of transition metals on top of a common topological insulator material and will assist in the future design of catalysts built with topological materials.

The synthesis and tunable topological properties of Sm-doped (Bi, Sb)2Te2S crystal

Topological insulators exhibit Dirac points in their topological surface states, but often such Dirac points are far from the Fermi level and sometimes even reside outside the bulk band gap. Here, we report the synthesis of a new topological insulator material Sm-doped (Bi, Sb)2Te2S, which has its surface tunable Dirac point exposed within the bulk gap and close to the Fermi level at a minimal distance of 73 meV with a large tunability of 157 meV, as evidenced by angle-resolved photoemission spectroscopy. The compensation doping by Sm creates a nearly insulating bulk and triggers an interesting phenomenon of all-configuration negative magnetoresistance. This signals a nearly compensated state where the bulk transport is mainly via percolation through charge puddles. Our work offers a new material platform suitable for regulating the position of surface Dirac points and exploring unique physical properties of topological insulators.

Fire-resistant and thermal insulation performance of SiC nanofiber batt fabricated from cotton fiber batt

The cotton fiber batt is one of the most commonly used thermal insulator in our lives at room temperature because of its flexible and porous structure. The SiC nanofibers have excellent mechanical, physical, and chemical properties such as high mechanical strength and modulus, low density, high-temperature resistance, which is a promising material for high temperature structural materials or thermal insulator. In this work, a flexible SiC nanofiber batt was fabricated from the cotton fiber batt by sol-gel carbothermal reduction reaction. The fluffy carbonized porous cotton batt was used as a template for the fabrication of sponge-liked SiC nanofiber batt composed of single crystalline β-SiC fibers. It exhibits good compressive flexibility, ultra-high porosity (a specific surface area was 30.90 m²/g), excellent high-temperature stability (ranging from −196 °C in liquid nitrogen to 1300 °C under the flame of butane blowtorch) and low thermal conductivity (0.02 W/(m·K) at room temperature). The SiC nanofiber batt, which has low density, excellent high-temperature resistance and oxidation resistance, is a promising material for high-temperature structural materials or thermal insulators under extreme conditions. The facile fabrication method of SiC nanofiber batt from common cotton batt provides a novel technique for economic industrial production of high temperature thermal insulation material.

An experimental evaluation of a hybrid bio-composite based on date palm petiole fibers, expanded polystyrene waste, and gypsum plaster as a sustainable insulating building material

Gypsum plaster is essential in construction as a thermal insulator and decorative material. This study aims to protect the environment by valorizing two commonly found wastes in Algeria, namely date palm petiole fibers (DPP) and expanded polystyrene waste (EPS), to produce a gypsum plaster hybrid biocomposite material comparable to, or better than, neat gypsum plaster (NGP). Hand-made samples with different DPP mass loadings (0; 5; 10; and 15%), EPS mass ratios (0.3%), or both were used. Different morphological, mechanical, and thermophysical tests were performed on the produced hybrid composites. FTIR shows the characteristic peaks for gypsum, polystyrene, and fibers. XRD shows that NGP, EPS, and DPP are 71.58, 29.91, and 52.93% crystallinity, respectively. Compression strengths, flexural strengths, and young modulus show that EPS, DPP, or both significantly reduce all mechanical properties of prepared samples. The biocomposites produced had lower thermal conductivity (λ) (0.265–0.414 W/(m.K) at 24◦C) and bulk density (ρ) (852–925 kg/m3) than reference NGP samples witch have 0.425 W/(m.K) in thermal conductivity and 977 kg/m3 in therm of bulk density. Based on a comparative study, gypsum plaster reinforced with DPP, EPS, or both exhibits potential as a viable alternative to insulation materials, thereby offering a sustainable solution for construction purposes.

Self-isolating electrode deposition process using the area-selective MoO2 and MoO3 atomic layer deposition technique

The traditional patterning process for semiconductor devices typically involves multiple steps, including thin film deposition across the entire substrate, selective removal of unwanted regions through lithography and etching, and subsequent isolation. While area-selective deposition process has been employed to eliminate the need for lithography and etching, the isolation step remains essential. In this study, we suggest an innovative approach to achieve “self-isolation electrode formation” using MoO2 and MoO3 as electrode and inter-metallic insulator materials. In a single deposition batch and subsequent post-deposition annealing (PDA) process, deposited MoOx (x: 2∼3) thin films exhibited transformation into highly crystalline MoO2 and MoO3 with low crystallinity, depending on whether they were deposited on TiN or SiO2 surfaces. We conducted comprehensive analyses, including chemical and electrical characterizations, as well as first-principles calculations based on density-functional theory, to elucidate the underlying mechanisms responsible for the differential reduction and crystallization of MoOx thin films. Finally, we successfully demonstrated the formation of self-isolation electrodes within a vertical structure, accomplished through a single-step process involving MoOx deposition and subsequent PDA. This novel approach, built upon advanced area-selective deposition techniques, holds great promise for the development of state-of-the-art semiconductor devices.

Pressure-driven dome-shaped superconductivity in topological insulator GeBi2Te4

The discovery of new superconductors based on topological insulators always captures special attention due to their unique structural and electronic properties. High pressure is an effective way to regulate the lattice as well as electronic states in the topological insulators, thus altering their electronic properties. Herein, we report the structural and electrical transport properties of the topological insulator GeBi2Te4 by using high-pressure techniques. The synchrotron x-ray diffraction revealed that GeBi2Te4 underwent two structural phase transitions from R-3m (phase I) to C2/m (phase II) and then into Im-3m (phase III). Superconductivity was observed at 6.6 GPa to be associated with the first structural phase transition. The superconducting transition temperature Tc reached a maximum value of 8.4 K, accompanied by the RH sign changing from negative to positive at 14.6 GPa, then gradually decreased with increasing pressure in phase III, showing a dome-shaped phase diagram. The present results provide a platform for understanding the interplay between the crystal structure and superconductivity by the regulation of pressure in the topological insulator materials.

Spectroscopic investigation of early light emission from anode-initiated surface flashover in vacuum

Time-resolved optical emission spectroscopy is used to explore the early development of anode-initiated flashover in vacuum. An experimental apparatus for collecting flashover self-luminosity is introduced, which enables spatially resolved light collection from regions adjacent to the anode and cathode triple junctions. The emitted light is spectrally and temporally resolved utilizing an imaging spectrograph and a fast electronic shutter camera. The first light detectable from flashovers across both Rexolite and polytetrafluoroethylene (PTFE) insulators begins less than 10 ns prior to the flashover gap's impedance collapse and consists of faint broadband feature in primarily visible wavelengths. This suggests luminosity due to excitation in the solid, possibly occurring as a result of field emitted electrons. In the few nanoseconds leading up to and including the impedance collapse, the broadband spectrum grows in intensity and extends into the UV, eventually accompanied by a few emission lines of the insulator material. This is strong evidence that the early stages of anode-initiated flashover include surface layer breakdown of the insulator, as a contrast from cathode-initiated flashover, which is predominately an above-surface process. Spectra accumulated over longer exposures of PTFE flashovers indicate that, in the first few hundred nanoseconds after the impedance collapse, ions from the insulator material constitute the majority of the emission lines. Later, neutral and ionic metal species from the electrode contribute with similar prominence as well as molecular bands from diatomic carbon. Finally, a comparison is provided of the results of these studies to other spectroscopic investigations of vacuum flashover from the literature.

Sustainable Super‐Insulating Packaging Composite from Recycled Wood

AbstractThermal insulation materials (TIMs) have been widely used over the past century. In this landscape, expandable polystyrene (EPS) is the dominant choice; however, the waste management of EPS is hampered by recycling challenges and lack of economic incentives. Concurrently, the order delivery and pharmaceutical distribution have experienced significant growth due to lifestyle shifts after the pandemic. For instance, the utilization of drones for transportation is illustrated (see abstract figure) as a prospective alternative transportation protocol. In this work, a synthetic method is developed to prepare bio‐degradable thermal insulator material from recycled wood and silica aerogel. The silica aerogel wood composite (SAWc) has the following properties: 1) low carbon emission (4.932 kg CO2e kg−1); 2) low thermal conductivity (0.032 W mK−1) with an anisotropy of 1.5; 3) high compressive strength (yield stress = 8.60 Mpa); 4) excellent resistance to organic solvents; 5) high biodegradability (49.4% weight loss after 28 days); 6) excellent flame retardancy, both of which are above EPS. The scalable, super‐insulating, and robust thermal insulator, as demonstrated in this work, holds high potential as an alternative packaging material poised to shape the next era in thermal insulation solutions.

Design and Simulation of Tunneling Diodes with 2D Insulators for Rectenna Switches.

Rectenna is the key component in radio-frequency circuits for receiving and converting electromagnetic waves into direct current. However, it is very challenging for the conventional semiconductor diode switches to rectify high-frequency signals for 6G telecommunication (>100 GHz), medical detection (>THz), and rectenna solar cells (optical frequencies). Such a major challenge can be resolved by replacing the conventional semiconductor diodes with tunneling diodes as the rectenna switches. In this work, metal-insulator-metal (MIM) tunneling diodes based on 2D insulating materials were designed, and their performance was evaluated using a comprehensive simulation approach which includes a density-function theory simulation of 2D insulator materials, the modeling of the electrical characteristics of tunneling diodes, and circuit simulation for rectifiers. It is found that novel 2D insulators such as monolayer TiO2 can be obtained by oxidizing sulfur-metal layered materials. The MIM diodes based on such insulators exhibit fast tunneling and excellent current rectifying properties. Such tunneling diodes effectively convert the received high-frequency electromagnetic waves into direct current.