Abstract This work represents the data on the wear behaviour of 304 stainless steel, commercial grade titanium and commercial grade aluminium without and with different surface treatments, namely ion implantation of boron and nitrogen and overlay coatings of titanium carbide and nitride. The surface treatments were characterized by phase identification, hardness, bend strength, as well as adhesion of overlay coatings. Wear properties were evaluated in adhesive, erosive and abrasive modes of wear. The experimental results showed that surface treatments produced measurable changes in hardness and strength. The results of adhesive wear tests indicated that the wear resistance of all the substrate materials can be considerably improved by overlay coating with superhard materials in dry as well as lubricated test conditions. Ion implantation resulted in improvement of wear properties for only a limited regime of adhesive wear under lubricated conditions and for the abrasive mode of wear. Overlay coatings produced a marked improvement in abrasive wear tests under lubricated conditions on all substrate materials.