In-phase Components Research Articles

A method for testing the wide-sense stationary uncorrelated scattering assumption fulfillment for an underwater acoustic channel.

Wide-sense stationary and uncorrelated scattering (WSSUS) assumptions are often applied for the statistical description of wireless communication channels. However, in the case of underwater acoustic channels the WSSUS model is of limited value. The degree of similarity of in-phase and quadrature components of the channel impulse response, measured with the use of bandpass modulated signals, can be used as an indicator of WSSUS assumption fulfillment. The paper describes an experimental method that uses quadrature Pseudo-Random Binary Sequence to evaluate the validity of the WSSUS assumption. The technique was developed by analyzing the shallow water experiment in the Bornholm Basin of the Baltic Sea.

Detection of RF signal real-time phase based on spectral hole-burning material

The detection of broadband signal power spectrum based on spectral hole-burning (SHB) material has been investigated a lot, but the detection of phase is not reported yet. In this paper, a method of RF signal real-time phase detection is proposed by applying the SHB material. Phase measurement is performed through the in-phase and in-quadrature components of emitted field generated by the macro polarization at steady state. The time range of reaching steady state is determined by numerical solution of Bloch equation solved by Runge–Kutta method. Furthermore, the effect of phase change rate on the accuracy of real-time phase measurement is also given. The typical RF signals are performed in the simulation to demonstrate the feasibility of the method and agreeable results are obtained in the phase value. Through the analysis of the effect of noise on the phase accuracy, When SNR is greater than 24 dB, phase error is less than 0.83%, and the phase error does not accumulate with time.

Design and performance analysis of generalised integrator-based controller for grid connected PV system

ABSTRACTThis article discusses the design and control of a single-phase grid-connected photovoltaic (PV) system. A 5-kW PV system is designed and integrated at the DC link of an H-bridge voltage source converter (VSC). The control of the VSC and switching logic is modelled using a generalised integrator (GI). The use of GI or its variants such as second-order GI have recently evolved for synchronisation and are being used as phase locked loop (PLL) circuits for grid integration. Design of PLL circuits and the use of transformations such as Park’s and Clarke’s are much easier in three-phase systems. But obtaining in-phase and quadrature components becomes an important and challenging issue in single-phase systems. This article addresses this issue and discusses an altogether different application of GI for the design of compensator based on the extraction of in-phase and quadrature components. GI is frequently used as a PLL; however, in this article, it is not used for synchronisation purposes. A new controller has been designed for a single-phase grid-connected PV system working as a single-phase active compensator. Extensive simulation results are shown for the working of integrated PV system under different atmospheric and operating conditions during daytime as well as night conditions. Experimental results showing the proposed control approach are presented and discussed for the hardware set-up developed in the laboratory.

Modeling and FPGA-based implementation of an efficient and simple envelope detector using a Hilbert Transform FIR filter for ultrasound imaging applications

Abstract Introduction Although the envelope detection is a widely used method in medical ultrasound (US) imaging to demodulate the amplitude of the received echo signal before any back-end processing, novel hardware-based approaches have been proposed for reducing its computational cost and complexity. In this paper, we present the modeling and FPGA implementation of an efficient envelope detector based on a Hilbert Transform (HT) approximation for US imaging applications. Method The proposed model exploits both the symmetry and the alternating zero-valued coefficients of a HT finite impulse response (FIR) filter to generate the in-phase and quadrature components that are necessary for the envelope computation. The hardware design was synthesized for a Stratix IV FPGA, by using the Simulink and the integrated DSP Builder toolbox, and implemented on a Terasic DE4-230 board. The accuracy of our algorithm was evaluated by the normalized root mean square error (NRMSE) cost function in comparison with the conventional method based on the absolute value of the discrete-time analytic signal via FFT. Results An excellent agreement was achieved between the theoretical simulations with the experimental result. The NRMSE was 0.42% and the overall FPGA utilization was less than 1.5%. Additionally, the proposed envelope detector is capable of generating envelope data at every FPGA clock cycle after 19 (0.48 µs) cycles of latency. Conclusion The presented results corroborate the simplicity, flexibility and efficiency of our model for generating US envelope data in real-time, while reducing the hardware cost by up to 75%.

Efficient Integration of Magnetic Positioning and Stable Communications

A promising integration method for high-precision positioning and stable communications by utilizing magnetic induction signals is proposed. In-phase and quadrature components are assigned to the positioning and communications, respectively. A pilot signal is used for identification of the in-phase and quadrature components, which leads to mutual interference of the two components caused by carrier phase synchronization error. Simulation and experiment confirm that the mutual interference and signal-to-noise ratio (SNR) loss are acceptable in our proposed scheme, i.e., the interference is weak and the SNR loss is about 1.6 dB as the carrier phase synchronization error less than ${5^\circ }$ . For instance, it is demonstrated that the root-mean-square error of positioning is less than 1.5 m and the transmission rate of communications is about 3000 bits per second when the distance is about 150 m, which is practical for applications such as the magnetic navigation, as well as compressed voice and message communications underground or underwater.

Amplitude and Frequency Estimation of Exponentially Decaying Sinusoids

An online method for amplitude and frequency estimation of exponentially decaying sinusoids is proposed with a moving-window discrete Fourier transform (MWDFT) filter and frequency-locked loop. The tuned filter characteristics of MWDFT is modified into more flat characteristic around the center frequency with negative feedback, which increases the bandwidth of the filter. An adaptive sampling pulse adjustment mechanism is incorporated in the proposed structure for online estimation of frequency. Hence, the frequency error was exploited to achieve synchronization between in-phase component of MWDFT and input signal of estimation. The amplitude is estimated in online from the in-phase and quadrature-phase components of MWDFT. The performance of the proposed method is compared with the existing techniques and experimentally validated on single-link flexible manipulator system for the online estimation of frequency and amplitude of tip deflection signal. The experimental investigation prove that the proposed online technique performs well over the existing techniques.

Precoded Index Modulation for Multi-Input Multi-Output OFDM

Index modulated orthogonal frequency division multiplexing (IM-OFDM) is a novel multicarrier transmission scheme, which provides considerable performance improvement compared with classical OFDM by conveying information via the active subcarrier indices in conjugation with the constellation symbols. In this paper, we extend the idea of IM-OFDM to multi-input multi-output (MIMO) systems and propose precoded MIMO-OFDM (PIM-MIMO-OFDM). Based on the channel state information at the transmitter, PIM-MIMO-OFDM selects the active elements of the receiver-side space-frequency subblocks via linear precoding. The spectral efficiency enhancement method of in-phase/quadrature index modulation is also employed to construct PIM-MIMO-OFDM with in-phase quadrature modulation by selecting the active space-frequency elements in the in-phase and quadrature components of the constellation symbol. Thanks to the carefully designed precoding, the co-channel interference among received antennas can be completely eliminated. Consequently, low-complexity maximum likelihood and suboptimal detectors are devised with linear detection complexity. Both analytical and numerical results show that, with the help of precoding, PIM-MIMO-OFDM can achieve better bit error rateperformance than traditional precoded MIMO-OFDM (P-MIMO-OFDM) in various system configurations. In addition, the spectral efficiency can be also enhanced compared with the P-MIMO-OFDM under certain configurations.

Integrated Geophysical Study to Delineate Mineralised Zones in Southwest Ashanti Belt of Ghana

Ground Frequency Domain Electromagnetic (FDEM) and Magnetic surveys were conducted in Southwest of the Ashanti belt in the Western Region of Ghana. The aim was to delineate potential gold mineralisation zones that may occur within the area. The magnetic data processing steps involved analytic signal, first vertical derivative, upward continuation, CET grid analysis as well as depth to basement model (Werner deconvolution). For the electromagnetic survey using the two coil separations (100 m and 150 m) and the multi frequencies (222 Hz, 888 Hz, 3555 Hz), the data in-phase component was processed to produce EM component maps showing the potential mineralisation zones. Lineament analysis using the rose diagram showed that the area is dominated by N-S and NNW-SSE lineaments. The upward continuation and depth to the magnetic source bodies indicated that the magnetic bodies in the study area can be located at depth less than 200 m.

Quadrature Channel Modulation

In this letter, we propose the concept of quadrature channel modulation (QCM) by combining quadrature spatial modulation (QSM) and media-based modulation (MBM) transmission principles. The proposed QCM schemes exploit not only the in-phase and quadrature components of complex data symbols for antenna indexing but also channel states for the transmission of additional information bits through index modulation by employing a single radio frequency (RF) chain. It is shown via numerical studies that the proposed QCM schemes can outperform the existing emerging schemes such as QSM, plain MBM, and spatial modulation-based MBM, which also employ a single RF chain at their transmitters.

Measurement of Relaxation Time of Excess Carriers in Si and CIGS Solar Cells by Modulated Electroluminescence Technique

Excess carrier lifetime plays a crucial role in determining the efficiency of solar cells. In this paper, we use the frequency dependence of inphase and quadrature components of modulated electroluminescence (MEL) to measure the relaxation time (decay) of excess carriers. The advantage of the MEL technique is that the relaxation time is obtained directly from the angular frequency at which the quadrature component peaks. It does not need knowledge of the material parameters like mobility, etc., and can be used for any finished solar cells which have detectable light emission. The experiment is easy to perform with standard electrical equipment. For silicon solar cells, the relaxation time is dominated by recombination and hence, the relaxation time is indeed the excess carrier lifetime. In contrast, for the CIGS solar cells investigated here, the relaxation time is dominated by trapping and emission from shallow minority carrier traps.

A 24 GHz Waveguide based Radar System using an Advanced Algorithm for I/Q Offset Cancelation

Abstract. Precise position measurement with micrometer accuracy plays an important role in modern industrial applications. Herewith, a guided wave Six-Port interferometric radar system is presented. Due to limited matching and discontinuities in the radio frequency part of the system, the designers have to deal with DC offsets. The offset voltages in the baseband lead to worse relative modulation dynamics relating to the full scale range of the analog-to-digital converters and thus, considerably degrade the system performance. While common cancelation techniques try to estimate and extinguish the DC offsets directly, the proposed radar system is satisfied with equalizing both DC offsets for each of the two differential baseband signal pairs. Since the complex representation of the baseband signals is utilized for a subsequent arctangent demodulation, the proposed offset equalization implicates a centering of the in-phase and quadrature (I/Q) components of the received signal, which is sufficient to simplify the demodulation and improve the phase accuracy. Therefore, a standard Six-Port radar system is extended and a variable phase shifter plus variable attenuators are inserted at different positions. An intelligent algorithm adjusts these configurable components to achieve optimal I/Q offset cancelation.

A New Dynamic Complex Baseband Pulse Compression Method for Chirp-Coded Excitation in Medical Ultrasound Imaging.

Chirp-coded excitation can increase the signal-to-noise ratio (SNR) without degrading the axial resolution. Effective pulse compression (PC) is important to maintain the axial resolution and can be achieved with radio frequency (RF) and complex baseband (CBB) data (i.e., and , respectively). can further reduce the computational complexity compared to ; however, suffers from a degraded SNR due to tissue attenuation. In this paper, we propose a new dynamic CBB PC method ( that can improve the SNR while compensating for tissue attenuation. The compression filter coefficients in the method are generated by dynamically changing the demodulation frequencies along with the depth. For PC, the obtained coefficients are independently applied to the in-phase and quadrature components of the CBB data. To evaluate the performance of the proposed method, simulation, phantom, and in vivo studies were conducted, and all three studies showed improved SNR, i.e., maximally 3.87, 7.41, and 5.75 dB, respectively. In addition, the measured peak range sidelobe level of the proposed method yielded lower values than the and , and it also derived a suitable target location, i.e., a <0.07-mm target location error, while maintaining the axial resolution. In an in vivo abdominal experiment, the method depicted brighter and clearer features in the hyperechoic region because highly correlated signals were produced by compensating for tissue attenuation. These results demonstrated that the proposed method can improve the SNR of chirp-coded excitation while preserving the axial resolution and the target location and reducing the computational complexity.

Generalized MGF of Beckmann Fading With Applications to Wireless Communications Performance Analysis

The Beckmann distribution is a general multipath fading model for the received radio signal in the presence of a large number of scatterers, which can thence be modeled as a complex Gaussian random variable where both the in-phase and quadrature components have arbitrary mean and variance. However, the complicated nature of this distribution has prevented its widespread use and relatively few analytical results have been reported for this otherwise useful fading model. In this paper, we derive a closed-form expression for the generalized moment-generating function (MGF) of the signal-to-noise ratio (SNR) of Beckmann fading, which permits to circumvent the inherent analytical complexity of this model. This is a new and useful result, as it is a key for evaluating several important performance metrics of different wireless communication systems and also permits to readily compute the moments of the output SNR. Thus, we obtain simple exact expressions for the energy detection performance in Beckmann fading channels, both in terms of the receiver operating characteristic (ROC) curve and of the area under ROC curve. We also analyze the outage probability in interference limited systems affected by Beckmann fading, as well as the outage probability of secrecy capacity in wiretap Beckmann fading channels. Monte Carlo simulations have been performed to validate the derived expressions.

Multiple-Mode Orthogonal Frequency Division Multiplexing With Index Modulation

Orthogonal frequency division multiplexing with index modulation (OFDM-IM) performs transmission by considering two modes over OFDM subcarriers, which are the null and the conventional $M$ -ary signal constellation. The spectral efficiency (SE) of the system, however, is limited, since the null mode itself does not carry any information and the number of subcarrier activation patterns increases combinatorially. In this paper, a novel IM scheme, called multiple-mode OFDM-IM (MM-OFDM-IM), is proposed for OFDM systems to improve the SE by conveying information through multiple distinguishable modes and their full permutations. A practical and efficient mode selection strategy, which is constrained on the phase shift keying/quadrature amplitude modulation constellations, is designed. Two efficient detectors that provide different tradeoffs between the error performance and detection complexity are also proposed. The principle of MM-OFDM-IM is further extended to the in-phase and quadrature components of OFDM signals, and the method of generating multiple modes from the $M$ -ary pulse amplitude modulation constellation for this modified scheme is also introduced. Bit error rate (BER) analyses are provided for the proposed schemes. Monte Carlo simulations on BER corroborate the analyses and show that the proposed schemes appear as promising multi-carrier transmission alternatives by outperforming the existing OFDM-IM counterparts.

Robust Self-Calibrating nCPMG Acquisition: Application to Body Diffusion-Weighted Imaging.

This paper demonstrates a robust diffusion-weighted single-shot fast spin echo (SS-FSE) sequence in the presence of significant off-resonance, which includes a variable-density acquisition and a self-calibrated reconstruction as improvements. A non-Carr-Purcell-Meiboom-Gill (nCPMG) SS-FSE acquisition stabilizes both the main and parasitic echo families for each echo. This preserves both the in-phase and quadrature components of the magnetization throughout the echo train. However, nCPMG SS-FSE also promotes aliasing of the quadrature component, which complicates reconstruction. A new acquisition and reconstruction approach is presented here, where the field-of-view is effectively doubled, but a partial k-space and variable density sampling is used to improve scan efficiency. The technique is presented in phantom scans to validate SNR and robustness against rapidly varying object phase. In vivo healthy volunteer examples and the clinical cases are demonstrated in abdominal imaging. This new approach provides comparable SNR to previous nCPMG acquisition techniques as well as providing more uniform apparent diffusion coefficient maps in phantom scans. In vivo scans suggest that this method is more robust against motion than previous approaches. The proposed reconstruction is an improvement to the nCPMG sequence as it is auto-calibrating and is justified to accurately treat the signal model for the nCPMG SS-FSE sequence.

A Novel Ratio-Phase Metric of Signal Quality Monitoring for Real-Time Detection of GPS Interference

Through the growing usage of Global Positioning System (GPS) for civilian applications, healthcare of the system has special importance. However, according to the characteristics of the GPS signals, there is a possibility of interferences on GPS signals. Among all distorting factors, spoofing is more deceitful, because the civil receiver is not able to distinguish the counterfeit signal from the genuine signal. In recent years, many efforts have been made to deal with spoofing. We studied recognition of the clear certainty of a spoofed condition in this work, which focuses on Signal Quality Monitoring (SQM) method. In an effort to troubleshoot the previous metrics and methods, we have introduced a new metric for interference detection that investigate both of in-phase and quadrature components of correlation outputs also use parameters associated with the main peak in proper form. As a consequence of simultaneous evaluation of phase and amplitude of GPS signal, the proposed metric is more reliable and average of detection accuracy has increased from 1.3 (related to previous metrics) to 4.8.

Image-Free Microwave Photonic Down-Conversion Approach for Fiber-Optic Antenna Remoting

For commercial and military applications, it is highly desired to acquire broadband radio frequency (RF) signals from remotely located receiving antennas to the central office (CO) for centralized signal processing such as down-conversion. In this paper, a photonic approach for image-free microwave frequency down-conversion is proposed for antenna remoting scenarios. The RF signal is captured by the phase modulator (PM) at remote antenna unit and transmitted over a long fiber link to the CO for performing frequency down-conversion. In analog, with the Hartley architecture in the electronic domain, two in-phase (I) and quadrature (Q) intermediate frequency (IF) components are generated by using an electro-optic polarization modulator (PolM) and two polarizers. To achieve large image rejection ratio (IRR), the digital post-processing technique is introduced to accurately compensate the amplitude and phase imbalances between the I and Q IF signals. In the experiments, a 2-km single-mode fiber link is inserted between the PM and PolM. As the local oscillator signals are set as 35 and 3 GHz, two target sinusoidal signals at 35.5 and 3.1 GHz are applied with two image signals, a sinusoidal signal at 34.5 GHz and a broadband RF signal centered at 2.9 GHz, respectively. Then, both real-time analog and off-line digital processing methods are used to process the generated I and Q IF signals for image rejection, yielding an IRR over 45 and 60 dB respectively, when the sinusoidal image signal is applied. The distortions from the broadband 2.9-GHz image RF signal are also effectively suppressed by using the two processing methods. The proposed approach is capable of covering a wide frequency range from 5 to 40 GHz.

A Spectrally Efficient Signal Space Diversity-Based Two-Way Relaying System

This work proposes a new transmission scheme for multirelay two-way relaying systems, where two end- sources communicate with each other via a set of relays. In the proposed scheme, we consider signal space diversity and time division broadcast protocol jointly to increase spectral efficiency without sacrificing the system reliability. The idea behind this consideration is that original data symbols are rotated before transmission, and then the in-phase and quadrature components of these rotated symbols are transmitted through the cooperation of the end-sources and the relays. By doing so, the end-sources exchange four symbols over three time slots instead of two, i.e., doubling the number of transmitted symbols. In addition, relay selection is incorporated into this scheme to achieve a further increase in spectral efficiency. For relay selection, two different strategies are discussed: reactive and proactive relay selections. These strategies differ depending on whether relay selection is performed after or before the start of transmission. Specifically, for each relay-selection strategy, we first obtain a closed-form expression for the end-to-end (E2E) error probability with an arbitrary constellation, which accounts for all the resulting nonuniform constellation cases due to constellation rotation. Subsequently, with the derived expressions, we then formulate an optimization problem that considers the joint optimization of the rotation angle and the transmit powers at the end-sources and the relays. The objective of the optimization problem is to minimize the E2E error probability of one of the end-sources, while satisfying a set of total and individual transmit power constraints and a predefined threshold for the E2E error probability of the other end-source. Numerical results verify the theoretical analysis, and show that the scheme proposed herein provides not only higher spectral efficiency, but also more reliable transmission.

A Multilevel Artificial Neural Network Nonlinear Equalizer for Millimeter-Wave Mobile Fronthaul Systems

We propose and validate a complex-valued multilevel artificial neural network nonlinear equalizer (ANN-NLE) for single-carrier 16QAM and 64QAM signals transmissions in the 60-GHz radio-over-fiber (RoF) transmission system. First, we analyze the nonlinearities in the fiber-wireless channels. Then, we introduce the principles of the multilevel ANN-NLE proposed for the millimeter-wave RoF systems. From the analysis of nonlinearities in a single-carrier optical transmission channel, it is essential to design a complex-valued ANN-NLE to mitigate the cross-modulation (XM) effects between the in-phase (I) and quadrature-phase (Q) components. Finally, we report on single-carrier signaling at 16QAM and 64QAM on 60 GHz, demonstrating the ability of the proposed ANN-NLE approach to minimize the nonlinear compression in an RoF system. As an added benefit, the complex-valued ANN-NLE has a great tolerance to phase rotations. The convergence time, activation function, step size, and number of taps are discussed in Section IV.

Alteration of volcanic rocks: A new non-intrusive indicator based on induced polarization measurements

Induced polarization is a geophysical method investigating the ability of rocks to store reversibly electrical charges under a slowly alternating electrical field. The material property of interest is a complex-valued electrical conductivity with an in-phase component associated with conduction and a quadrature component associated with polarization. We investigated the relationship between complex conductivity spectra over the frequency range 1mHz–45kHz and the specific surface area (SSA) of 28 volcanic core samples extracted from a wellbore drilled for the Humuʻula Groundwater Research Project in Hawaii. The specific surface area of these samples was determined through the Brunauer, Emmett and Teller (BET) method. Subcritical nitrogen adsorption experiments were conducted using two different instruments and the samples were prepared in both pellets and powder forms. The BET specific surface area is found to be highly correlated to the cation exchange capacity of the core samples measured by the cobalthexamine method. The in-phase conductivity itself can be decomposed as the sum of a bulk contribution associated with conduction in the bulk pore water and a surface conductivity associated with conduction in the electrical double layer coating the grains. The surface conductivity, the quadrature conductivity, and the normalized chargeability (defined as the difference between the in-phase conductivity at high and low frequencies) are observed to be linearly correlated to the specific surface area or the surface per volume ratio of the core samples, which can be considered as proxy of alteration. These trends are consistent with those shown by sedimentary rocks. This new data set demonstrates that the induced polarization method can be potentially used to image alteration in volcanic environments.