Hydroxyapatite Nanoparticles Research Articles

Engineering Wet-Resistant and Osteogenic Nanocomposite Adhesive to Control Bleeding and Infection after Median Sternotomy.

Median sternotomy surgery stands as one of the prevailing strategies in cardiac surgery. In this study, the cutting-edge bone adhesive is designed, inspired by the impressive adhesive properties found in mussels and sandcastle worms. This work has created an osteogenic nanocomposite coacervate adhesive by integrating a cellulose-polyphosphodopamide interpenetrating network, quaternized chitosan, and zinc, gallium-doped hydroxyapatite nanoparticles. This adhesive is characterized by robust catechol-metal coordination which effectively adheres to both hard and soft tissues with a maximum adhesive strength of 900 ± 38kPa on the sheep sternum bone, surpassing that of commercial bone adhesives. The release of zinc and gallium cations from nanocomposite adhesives and quaternized chitosan matrix imparts remarkable antibacterial properties and promotes rapid blood coagulation, in vitro and ex vivo. It is also proved that this nanocomposite adhesive exhibits significant in vitro bioactivity, stable degradability, biocompatibility, and osteogenic ability. Furthermore, the capacity of nanocomposite coacervate to adhere to bone tissue and support osteogenesis contributes to the successful healing of a sternum bone defect in a rabbit model in vivo. In summary, these nanocomposite coacervate adhesives with promising characteristics are expected to provide solutions to clinical issues faced during median sternotomy surgery.

Epoxy resin bioactive dental implant capped with hydroxyapatite and curcumin nanoparticles: a novel approach.

In this study, the developed bioactive dental implant (BDI) from epoxy resin (ER), hydroxyapatite (HA), and curcumin nanoparticles (CUNPs). The prepared BDI were characterized using their physicochemical, mechanical, antimicrobial, bioactive, and biocompatibility study. The scanning electron microscopy (SEM) morphology of the BDI was observed HA mineralized crystal layer after being immersed in the stimulated body fluids (SBF) solution. The mechanical properties of the BDI exhibited tensile strength (250.61 ± 0.43MPa), elongation at break (215.66 ± 0.87%), flexural modulus (03.90 ± 0.12 GPa), water absorption (05.68 ± 0.15%), and water desorption (06.42 ± 0.14%). The antimicrobial activity of BDI was observed in excellent zone of inhibition against the gram-negative (15.33 ± 0.04%) and gram- positive (15.98 ± 0.07%) bacteria. The biocompatibility study of BDI on osteoblasts cell line (MG-63) was analyzed using MTT (3-[4, 5-dimethylthiazol-2-yl]-2,5 diphenyl tetrazolium bromide) assay. The results were observed 85% viable cells present in the BDI compared to the control (only ER) samples. Based on the research outcome, the BDI could be used for biomaterials application, particularly tooth dental implantation.

Correlation between positron annihilation lifetime and photoluminescence measurements for calcined Hydroxyapatite

Hydroxyapatite (HAp) Ca10(PO4)6(OH)2 is a compound that has stable chemical properties, composition, and an affinity for human bone. As a result, it can be used in odontology, cancer treatment, and orthopedic grafts to repair damaged bone. To produce calcined HAp at 600 °C with different pH values, a wet chemical precipitation method was employed. All synthesized HAp samples were characterized by X-ray diffraction (XRD), Raman spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier-transform infrared spectroscopy (FTIR), photoluminescence (PL), Zeta potential, and positron annihilation lifetime spectroscopy (PALS). The XRD results revealed that all calcined HAp samples were formed in a hexagonal structure with a preferred (002) orientation at different pH values. The crystal size of the samples was determined using the Scherrer equation, which ranged from 16 to 25 nm. The SEM and TEM results showed that the morphology of the samples varied from nanorods to nanospheres and rice-like structures depending on the pH value of the sample. The PL measurements indicated that the blue and green emission peaks of HAp were due to defects (bulk, surface, and interface) in the samples, which created additional energy levels within the band gap. According to Zeta potential measurements, the charge carrier changed from a positive to negative value, ranging from 3.94 mV to − 2.95 mV. PALS was used to understand the relationship between the defects and the photoluminescence (PL) properties of HAp. Our results suggest that HAp nanoparticles have excellent potential for developing non-toxic biomedical and optical devices for phototherapy.

Development of resin‐based dental composites containing hydroxyapatite and zirconia nanoparticles

AbstractIn clinical applications, resin‐based dental composites primarily face challenges with fractures and secondary caries. To overcome these issues, the physical characteristics of dental composites, especially mechanical properties, need to be improved. Hydroxyapatite (HA), present in the structure of the teeth, is preferred due to its biological properties, and zirconia (ZrO2) nanoparticles are known to enhance the mechanical properties of this type of composites. The aim of this study is to develop resin‐based dental composites containing HA and ZrO2 nanoparticles. The study also aims to explore the synergistic effect of these two nanoparticles on the physical properties of the developed composites. Composites with nine different compositions were prepared by mixing the components with the help of a mortar mill. The flexural and compressive strength, polymerization shrinkage, depth of cure and water sorption, and solubility properties of the prepared composites have been investigated. All composites have been found to meet the requirements of ISO 4049 standard. Among them, composite containing 5 wt. % HA and 1 wt. % ZrO2 (H5Z1) has exhibited the highest flexural strength with an increase of 58% compared to the control sample, and composite containing 3 wt. % HA and 2 wt. % ZrO2 (H3Z2) has exhibited the highest compressive strength with an increase of 22% compared to the control sample. Other physical properties of the composites have been found to be in an acceptable level.Highlights Dental composites with HA and ZrO2 fillers were developed by a mortar mill. Synergistic effect of HA and ZrO2 nanoparticles was investigated. Mechanical properties of dental composites were significantly improved. Physical properties of dental composites were found to be at acceptable levels. Depth of cure decreases with increasing HA and ZrO2 loading.

Complete genome sequence of Delftia tsuruhatensis strain HA60 isolated from a commercial hydroxyapatite nano-particle product (nano-hydroxyapatite).

Delftia tsuruhatensis is a Gram-negative rod-shaped aerobic bacterium with environmental remediation functions. D. tsuruhatensis strain HA60 was isolated from a commercial nano-particle product, nano-hydroxyapatite. We report that the genome of D. tsuruhatensis strain HA60 has a circular genome of 6,922,195 base pairs with a G+C content of 66.45%.

Design and Analysis of Composite Biomaterial Bone Graft Plate

The mixing technique was applied in this study to enhance the strength performance of the cement. The addition of 3% by weight of hydroxyapatite (HA) nanoparticles were mixed with 97% polymethyl methacrylate (PMMA) acrylic polymer, which has a nano size to serve as the matrix material. The surface roughness and continuous porosity of the bone cement were found to be slightly increased by the incorporation of nanoparticles, which enhanced bone-implant osseointegration and ingrowth. Atomic force microscopy (AFM) analysis revealed that the addition of hydroxyapatite (HAp) nanoparticles resulted in a surface roughness value (Sa) of 16.25 nm, which is similar to that of natural bone. The energy-dispersive X-ray spectroscopy (EDS) mapping results discover precentor material and uniform distribution. The Sample exhibited promising results in the antibacterial test, showing efficacy against bacteria both with and without sterilization, confirming its antibacterial properties. The mechanical tests conducted on the sample, including tensile, compression, bending and Vickers hardness tests, yielded favorable results and indicated that the sample is suitable for its intended application. In the theoretical works the design of the bone, screw, and bone plate was conducted using SolidWorks, followed by an analysis using ANSYS under both axial and bending load conditions. The theoretical analysis revealed that the safety factor was less than 1 when an axial load of 13 N was applied and a bending load of 2 N was applied, indicating that the structure may not be able to withstand these loads safely. Under both ambient and physiologically relevant conditions in the human body, HA and PMMA have demonstrated to be excellent choices for enhancing the clinical performance of bone cement. This, in turn, can lead to increased longevity of implants, decreased patient risk, and lower healthcare costs

Bioceramic filled PLA based nanocomposites for biomedical application: An experimental investigation

Orthopedic implants require innovative biodegradable materials to eliminate the need for a second surgery post-healing and to counteract the stress shielding issues associated with conventional metallic implants. Polylactic acid (PLA) was chosen for its biocompatibility and biodegradability within the human body. Hydroxyapatite (HAP) and eggshell nanoparticles (ESNPs) were selected as bioceramics due to their similarity to the major constituents of human bone. In the present study, ESNPs were prepared through a ball mill. HAP and Mg particles coated with TiO2 (TiO2@Mg) were synthesized through chemical precipitation and the sol-gel technique, respectively. Subsequently, four samples were prepared: PLA/ESNP/Mg (PEM), PLA/HAP/Mg (PHM), PLA/ESNP/TiO2@Mg (PEMT), and PLA/HAP/TiO2@Mg (PHMT) using the solvent casting process. The addition of Mg demonstrated an enhancement of degradation rates, and TiO2@Mg served to eliminate hydrogen release from Mg. The confirmation of synthesized NPs and PLA nanocomposites was validated through Fourier Transform Infrared Spectroscopy (FTIR), X-ray diffraction (XRD), and Field-Emission Scanning Electron Microscopy (FE-SEM) analysis. The prepared PEMT and PHMT showed tensile strength (42.70 ± 7.55 MPa and 31.57 ± 3.84 MPa), tensile modulus (1624.49 ± 155.05 MPa and 1674.25 ± 87.04 MPa), and shore D hardness (79.41 ± 2.40 SHN and 77.81 ± 3.18 SHN), respectively. The findings showed that PEMT and PHMT composites exhibited enhanced surface roughness, hydrophilicity, degradation rate, and swelling behavior compared to PEM and PHM samples. Moreover, the viability of MG63 cells cultured in different diluted extracts of both samples reached approximately 80 %, indicating no observable cytotoxicity and a hemolysis rate of less than 1.4 %, indicating the potential for use in maxillofacial region implants.

Composite Nanomaterials Based on Polymethylmethacrylate Doped with Carbon Nanotubes and Nanoparticles: A Review.

Composite polymer materials have high strength and lightness, which makes them attractive for use in a variety of structures and products. The present article contains an overview of modern works devoted to the production of composite materials based on poly(methyl methacrylate) (PMMA) with improved characteristics. The possibility of obtaining such materials can be a key area for creating more efficient and durable products in various industries. Various methods were considered to improve the characteristics of PMMA by doping the polymer matrix with carbon nanotubes (CNTs), graphite, nanohydroxyapatite particles, micro-zirconia nanoparticles, titanium dioxide, etc. The possibilities of using the obtained composite materials in various industries such as aviation, automotive, construction, medical and others are discussed. This article also presents the results of our own research on the mechanisms of interaction of PMMA with single-layer CNTs, leading to the creation of a composite polymer system "PMMA+CNT", achieved using the modern quantum chemical method DFT. This article presents a review of the recent research on the effect of CNTs on the mechanical and electrically conductive properties of nanocomposite materials. The outcomes of this study can be important for the development of science and technology in various fields, from fundamental chemistry to applied scientific research.

Comparison of Water-Based Drilling Muds with Hydroxyapatite Nanoparticles and Copper II Oxide Nanoparticles for Lifting Cuttings Through Rotating Drill Pipes at Different Hole Inclinations

Comparison of Water-Based Drilling Muds with Hydroxyapatite Nanoparticles and Copper II Oxide Nanoparticles for Lifting Cuttings Through Rotating Drill Pipes at Different Hole Inclinations

Effect of hydroxyapatite nanoparticles coating of titanium surface on biofilm adhesion: An in vitro study

AimTo evaluate the adhesion of mono and duospecies biofilm on a commercially available dental implant surface coated with hydroxyapatite nanoparticles (nanoHA). Material and methodsTitanium discs were divided into two groups: double acid-etched (AE) and AE coated with nanoHA (NanoHA). Surface characteristics evaluated were morphology, topography, and wettability. Mono and duospecies biofilms of Streptococcus sanguinis (S. sanguinis) and Candida albicans (C. albicans) were formed. Discs were exposed to fetal bovine serum (FBS) to form the pellicle. Biofilm was growth in RPMI1640 medium with 10% FBS and 10% BHI medium for 6 h. Microbial viability was evaluated using colony-forming unit and metabolic activity by a colorimetric assay of the tetrazolium salt XTT. Biofilm architecture and organization were evaluated by confocal laser scanning microscopy (CLSM) and scanning electron microscopy (SEM). ResultsAE surface had more pores, while NanoHA had even nanoHA crystals distribution. Roughness was similar (AE: 0.59 ± 0.07 µm, NanoHA: 0.69 ± 0.18 µm), but wettability was different (AE: Θw= 81.79 ± 8.55°, NanoHA: Θw= 53.26 ± 11.86°; P = 0.01). NanoHA had lower S. sanguinis viability in monospecies biofilm (P = 0.007). Metabolic activity was similar among all biofilms. In SEM both surfaces on C. albicans biofilm show a similar distribution of hyphae in mono and duospecies biofilms. AE surface has more S. sanguinis than the NanoHA surface in the duospecies biofilm. CLSM showed a large proportion of live cells in all groups. ConclusionsThe nanoHA surface reduced the adhesion of S. sanguinis biofilm but did not alter the adhesion of C. albicans or the biofilm formed by both species.

Dynamics of Dental Enamel Surface Remineralization under the Action of Toothpastes with Substituted Hydroxyapatite and Birch Extract.

To address tooth enamel demineralization resulting from factors such as acid erosion, abrasion, and chronic illness treatments, it is important to develop effective daily dental care products promoting enamel preservation and surface remineralization. This study focused on formulating four toothpastes, each containing calcined synthetic hydroxyapatite (HAP) in distinct compositions, each at 4%, along with 1.3% birch extract. Substitution elements were introduced within the HAP structure to enhance enamel remineralization. The efficacy of each toothpaste formulation was evaluated for repairing enamel and for establishing the dynamic of the remineralization. This was performed by using an in vitro assessment of artificially demineralized enamel slices. The structural HAP features explored by XRD and enamel surface quality by AFM revealed notable restorative properties of these toothpastes. Topographic images and the self-assembly of HAP nanoparticles into thin films on enamel surfaces showcased the formulations' effectiveness. Surface roughness was evaluated through statistical analysis using one-way ANOVA followed by post-test Bonferroni's multiple comparison test with a p value < 0.05 significance setting. Remarkably, enamel nanostructure normalization was observed within a short 10-day period of toothpaste treatment. Optimal remineralization for all toothpastes was reached after about 30 days of treatment. These toothpastes containing birch extract also have a dual function of mineralizing enamel while simultaneously promoting enamel health and restoration.

Incorporation of hydroxyapatite and cerium oxide nanoparticle scaffold as an antibacterial filler matrix for biomedical applications.

Managing bone healing is essential for preventing problems such as non-union, bacterial infection, structural instability, psychological, and physical damage in patients. The need to use antibiotics less often has prompted researchers to look at possible substitutes, such as nanoparticles. In this investigation, we choose to employ cerium oxide nanoparticles due to their unique antibacterial properties based on redox reactions. The cerium oxide-hydroxyapatite composite was synthesized, calcined, and ball-milled to create a fine CeO2-HA powder. Luffa cylindrica sponge was used to prepare the scaffold, and X-ray diffraction (XRD) and scanning electron microscopy (SEM) were used to investigate the structural and morphological features. Rapid upregulation of osteogenesis marker genes confirmed that CeO2-HA nanoparticles in the scaffolds promoted osteoblast cell proliferation and osteogenic differentiation. The cell viability test was conducted by MTT assay. When the CeO2-HA composite was cultured with S. aureus, it showed signs of having more antibacterial efficacy than pure HA.

Cell viability assessment and ion release profiles of GICs modified with TiO2- and Mg-doped hydroxyapatite nanoparticles

ObjectivesTo assess and compare the cell viability and ion release profiles of two conventional glass ionomer cements (GICs), Fuji IX and Ketac Molar EasyMix, modified with TiO2 and Mg-doped-HAp nanoparticles (NPs). MethodsTiO2 NPs, synthesized via a sol–gel method, and Mg-doped hydroxyapatite, synthesized via a hydrothermal process, were incorporated into GICs at a concentration of 5 wt.%. The biocompatibility of prepared materials was assessed by evaluating their effects on the viability of dental pulp stem cells (DPSCs), together with monitoring ion release profiles. Statistical analysis was performed using One-way analysis of variance, with significance level p < 0.05. ResultsThe addition of NPs did not significantly affect the biocompatibility of GICs, as evidenced by comparable decreased levels in cell viability to their original formulations. Distinct variations in cell viability were observed among Fuji IX and Ketac Molar, including their respective modifications. FUJI IX and its modification with TiO2 exhibited moderate decrease in cell viability, while other groups exhibited severe negative effects. While slight differences in ion release profiles were observed among the groups, significant variations compared to original cements were not achieved. Fluoride release exhibited an initial “burst release” within the initial 24 h in all samples, stabilizing over subsequent days. ConclusionsThe addition of NPs did not compromise biocompatibility, nor anticariogenic potential of tested GICs. However, observed differences among FUJI IX and Ketac Molar, including their respective modifications, as well as induced low viability of DPSC by all tested groups, suggest the need for careful consideration of cement composition in their biological assessments. Clinical significanceThe findings contribute to understanding the complex interaction between NPs and GIC matrices. However, the results should be interpreted recognizing the inherent limitations associated with in vitro studies. Further research avenues could explore long-term effects, in vivo performance, and potential clinical applications.

Development of porous hydroxyapatite/PVA/gelatin/alginate hybrid flexible scaffolds with improved mechanical properties for bone tissue engineering

Porous scaffolds based on gelatin and hydroxyapatite particles (HAp) are promising for applications in bone tissue engineering and regenerative medicine. However, they are not ideal for stress and shock protection due to low compressive strength, brittleness, and poor toughness. Herein, we developed porous hybrid scaffolds by combining multiple components into a single bone scaffold, including hydroxyapatite nanoparticles (HAp NPs), alginate, polyvinyl alcohol (PVA), and gelatin with different gelatin/PVA composition ratios. HAp NPs were synthesized in situ in PVA solution and scaffolds were fabricated using a freeze-drying method. The results showed good physicochemical properties of the scaffolds: formation of pure HAp NPs phase, high porosity, large pore sizes, large swelling capacity depending on varying gelatin/PVA ratios, as well as a long-term degradation rate up to 28 days. The porous scaffolds exhibited compressive strength close to the cancellous bone with stress-strain behavior exhibiting three-stage flexible behavior indicating improved fracture resistance with an energy absorbing capability up to 1.9 MJ/m3. The scaffolds have a yield strength of 70–403 kPa, a compressive strength at 65 % strain of 0.96–1.80 MPa, a nonporous elastic modulus of 10.44–12.40 GPa, and a densification strain of approximately 0.92 %. This work develops three-dimensional (3D) porous hybrid bone scaffolds with mechanical strength within the minimum compressive strength of cancellous bone and mechanical energy absorption capacity favor for cancellous bone repair, bone tissue engineering, and regenerative medicine applications.

Scalable Synthesis of Size-Tunable Hydroxyapatite Nanoparticles as Potential Nanofertilizers

Scalable Synthesis of Size-Tunable Hydroxyapatite Nanoparticles as Potential Nanofertilizers

Antitumor effects of polydopamine coated hydroxyapatite nanoparticles and its mechanism: Mitochondria-targeted ROS and calcium channels

Nano hydroxyapatite (nHA) has been acknowledged for its inhibition efficiency on tumor cells and its excellent biocompatibility for normal tissue and cells. However, the low inhibitory efficiency of tumor cells and the ambiguous inhibitory mechanism limited its further application. In this work, four kinds of nHA with different sizes was prepared, and the one with the highest inhibition efficiency on 4T1 cells was screened as a substrate for developing the nanoparticles coated with polydopamine (PDA) coating, which was named nHA-PDA. Both in vivo and in vitro experiments were employed, and the results showed significantly higher inhibitory activity against 4T1 cells and 4T1-bared tumors by nHA-PDA. Further investigation revealed that the oxidative stress induced by PDA results in a large Reactive Oxygen Species (ROS) accumulation, thus triggering the mitochondria-dependent apoptosis pathway ROS-JNK/MAPK and inducing the cascade reaction of inhibiting the anti-apoptosis protein-Bcl-2 expression and activating the expression of the critical genes in apoptosis signaling pathway (caspase 3 and caspase 9). Besides, the significant increase of intracellular [Ca2+] may also be an essential reason for the damage of mitochondria, eventually leading to apoptosis.

Gelatin/PVP/hydroxyapatite nanocomposite based on double micro-emulsion for tissue engineering applications

Biomedical applications of composite hydrogels are attractive because of their characteristics. Gelatin/poly (vinyl pyrrolidone) (PVP) and HAp nanocomposite hydrogel are developed and characterized by FTIR, XRD, etc. In a bicomponent system, gelatin ensures biodegradability and biocompatibility. In contrast, PVP, a physiologic inert component, can impart elasticity to films and membranes due to its affinity for water and capacity to confer elasticity to films and membranes. Morphology, physicomechanical properties, water content, and in vitro studies were explored. To characterize the morphology of nanocomposite hydrogels, EDX and SEM were used. In addition, the Gelatin/PVP hydrogel composite had a water content of 85.8%. Hydrophilicity was significantly enhanced by adding hydroxyapatite nanoparticles. Samples containing HAp showed the highest swelling ratios. Biocompatibility tests performed on L929 cells showed significant attachment and viability. Based on the results, nanocomposite hydrogels might be suitable for tissue engineering because they support cell growth and proliferation well.

Synthesis and characterization of nano-biocomposite (PMMA-hydroxyapatite - CaZrO3) for bone tissue engineering

ABSTRACT In a common scenario, bone fractures have a self-healing function with free-surgical intervention. However, some fractures in bone tissue are complex and leave behind remnant deformation that requires biomaterials for replacement. The aim of this study is to develop a new composite 3D scaffold for bone regeneration and replacement composed of calcium zirconate (CaZrO3), hydroxyapatite (HA) and polymethylmethacrylate (PMMA) polymer. Different 3D scaffolds were fabricated by mixing 90, 80, 70, and 60 wt. % PMMA with HA and CaZrO3 nanoparticles in different concentrations. X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM) and atomic force microscopy (AFM) techniques were applied to characterize the 3D composite scaffold properties. Furthermore, the mechanical properties of the fabricated scaffolds were investigated using Brazilian diametral fracture test. It was found that incorporating a uniform distribution of HA nanoparticles significantly increased the surface roughness of the composite scaffold. Furthermore, the fracture strength of the fabricated 3D scaffolds showed a remarkable improvement of 86% in the sample containing 90% PMMA, 7% HA, and 3% CaZrO3 compared to the sample devoid of CaZrO3. Our findings strongly indicate that integrating hybrid CaZrO3-HA nanoparticles into PMMA polymer for the production of 3D composite scaffolds holds significant promise for bone tissue applications, potentially enhancing their efficacy and performance.

Influence of size and crystallinity of nanohydroxyapatite (nHA) particles on the properties of Polylactic Acid/nHA nanocomposite scaffolds produced by 3D printing

Polylactic acid (PLA) and hydroxyapatite (HA) composite scaffolds have been widely studied for applications in bone tissue engineering (BTE) due to their bioactive and biocompatible properties. However, there is a need for more knowledge about the influence of size and crystallinity of HA nanoparticles (nHA) on the properties of PLA/nHA nanocomposite scaffolds produced by 3D printing. In this study, 3D printing was used to produce PLA nanocomposite scaffolds incorporated with nHA filler with different particle sizes and crystallinities. Initially, the nanocomposites were prepared by casting for 3D printing of scaffolds, which were characterized by analysis of thermal, morphological, physical-chemical, mechanical, and biological properties in vitro. The results showed that the size and crystallinity of nHA particles mainly influenced the scaffolds' mechanical properties, degradation rate, and bioactivity. Incorporating nHA provided a gain in compressive strength compared to pure PLA, superior to natural cancellous bone, which varies between 2 and 12 MPa. The lower crystallinity, 39.46 %, promoted a higher rate of degradation and bioactivity in vitro due to its solubility in the simulated fluid. All nanocomposite scaffolds showed cell viability above 90 %. The scaffolds showed suitable properties for BTE applications.

Nanocomposite Methacrylated Silk Fibroin-Based Scaffolds for Bone Tissue Engineering.

The treatment of bone defects is a clinical challenge. Bone tissue engineering is gaining interest as an alternative to current treatments, with the development of 3D porous structures (scaffolds) helpful in promoting bone regeneration by ensuring temporary functional support. In this work, methacrylated silk fibroin (SilMA) sponges were investigated as scaffolds for bone tissue engineering by exploiting the combination of physical (induced by NaCl salt during particulate leaching) and chemical crosslinking (induced by UV-light exposure) techniques. A biomimetic approach was adopted to better simulate the extracellular matrix of the bone by introducing either natural (mussel shell-derived) or synthetic-origin hydroxyapatite nanoparticles into the SilMA sponges. The obtained materials were characterized in terms of pore size, water absorption capability and mechanical properties to understand both the effect of the inclusion of the two different types of nanoparticles and the effect of the photocrosslinking. Moreover, the SilMA sponges were tested for their bioactivity and suitability for bone tissue engineering purposes by using osteosarcoma cells, studying their metabolism by an AlamarBlue assay and their morphology by scanning electron microscopy. Results indicate that photocrosslinking helps in obtaining more regular structures with bimodal pore size distributions and in enhancing the stability of the constructs in water. Moreover, the addition of naturally derived hydroxyapatite was observed to be more effective at activating osteosarcoma cell metabolism than synthetic hydroxyapatite, showing a statistically significant difference in the AlamarBlue measurement on day 7 after seeding. The methacrylated silk fibroin/hydroxyapatite nanocomposite sponges developed in this work were found to be promising tools for targeting bone regeneration with a sustainable approach.