Hydrocolloid Films Research Articles

Manufacture of Bioplastics Prepared from Chitosan Functionalized with Callistemon citrinus Extract.

The exploration of natural resources in bioplastics has advanced the development of bio-based materials. Utilizing the casting, chitosan (CH)-based films were manufactured with different glycerol (GLY) percentages (from 0 to 50% w/w of CH) and anthocyanin-enriched fractions (from 0 to 5% of w/w CH) of acidified ethanol extract of Callistemon citrinus flowers (CCE). Callistemon citrinus is an ornamental plant known for its bioactive compounds endowed with health benefits. The hydrocolloid films showed promising mechanical properties. The 30% GLY + 5% CCE film achieved an elongation at break of 57.4%, comparable to the 50% GLY film while possessing enhanced tensile strength and Young's modulus. The CCE, rich in antioxidants, acted as a plasticizer, improving films' flexibility and manageability. The films exhibit hydrophilic characteristics with moisture content and uptake values reflecting their water-absorbing capacity, while films with 30% GLY and 5% CCE exhibit enhanced hydrophobicity. In addition, CCE characterization reveals significant polyphenol content (734.45 mg GAE/g), highlighting its antioxidant capacity. Moreover, CCE supplies remarkable antioxidant properties to the films. These findings suggest the potential of these bioplastics for industrial applications as a sustainable solution to traditional plastics and in reducing environmental impact while preventing oxidative reactions in packaged products.

Mentha piperita silver nanoparticle-loaded hydrocolloid film for enhanced diabetic wound healing in rats.

To investigate the role of Mentha piperita silver nanoparticle-loaded carbopol gel for enhanced wound healing in a diabetic rat model. This research further aims to explore bioactive compounds derived from Mentha piperita obtained from high altitude. Methanolic extracts of Mentha piperita (MP), Mentha spicata (MS) and Mentha longifolia (ML) were used to synthesise silver nanoparticles (AgNP). AgNP synthesis was confirmed by ultraviolet-visible (UV-Vis) spectroscopy, X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). The antioxidant activity was assessed by 2, 2-diphenyl-1-picrylhydrazyl (DDPH) assay. Antiglycation potential was determined by measuring the fluorescent advanced glycation end products. The bioactive compound identified in the Mentha piperita methanolic (MPM) fraction through electrospray ionisation tandem mass spectrometric analysis (ESI-MS) was responsible for the highest antiglycation. The effects of MPM and MPM.AgNP-loaded Carbopol (Sanare Lab, India) on wound healing were compared in male, alloxan-induced, diabetic albino rats (200-250g), divided into control and treated groups. Effects on wound healing were assessed via histopathology. UV-Vis and FTIR confirmed NP synthesis with peaks for flavonoids and polyphenols. SEM and XRD explored the cubical, 30-63nm crystalline NP. The maximum antioxidant and antiglycation potential was observed in order of; MP.AgNP>MS.AgNP>ML.AgNP. The highest antioxidant activity was observed by methanolic and aqueous MP.AgNPs (88.55% and 83.63%, respectively) at 2mg.ml-1, and (75.16% and 69.73%, respectively) at 1mg.ml-1, compared to ascorbic acid (acting as a positive control, 90.01%). MPM.AgNPs demonstrated the best antiglycation potential of 75.2% and 83.3% at 1mg.ml-1 and 2mg.ml-1, respectively, comparable to positive control (rutin: 88.1%) at 14 days post-incubation. A similar trend was observed for antimicrobial activity against Bacillus subtilis, Micrococcus luteus and Escherichia coli with an inhibition zone of 21mm, 21.6mm and 24.6mm. Rosmarinic acid was the active compound present in Mentha piperita, as identified by ESI-MS. MPM.AgNP-loaded Carbopol resulted in 100% wound closure compared with control at 20 days post-wounding. In the treatment group, re-epithelialisation was achieved by day 18, compared with 25 days for the positive control group. MPM.AgNP-loaded Carbopol demonstrated safer and more effective biological properties, hence accelerating the diabetic excision wound healing process in alloxan-induced diabetic rats.

Fabrication and characterization of a hydrocolloid wound dressing functionalized with human placental derived extracellular matrix for management of skin wounds: An animal study.

Functionalization of wound dressing is one of the main approaches for promoting wound healing in skin wound management. In this study, our aim is to fabricate a bio-functionalized hydrocolloid wound dressing. The extracellular matrix (ECM) was extracted from human placental tissue. A hydrocolloid film was fabricated using Na-CMC, pectin, gelatin, styrene-isoprene-styrene adhesive, glycerol, and 0.5%-2.5% powdered ECM. A polyurethane film and a release liner were used in the hydrocolloid/ECM films. The mechanical, adhesion, swelling rate, and integrity of the films were investigated. Cell proliferation, adhesion, and migration assays, as well as, SEM and FTIR spectroscopy were also conducted. Macroscopic and microscopic evaluations of wound healing process and formation of blood vessels were conducted in mouse animal models. We successfully fabricated a three-layered ECM-functionalized hydrocolloid dressing with a water vapor transmission rate of 371 g/m2 /day and an adhesion peel strength of 176 KPa. Cellular adhesion, proliferation and migration were promoted by ECM. In the animal tests, ECM-functionalized hydrocolloids significantly improved wound closure and re-epithelialization at days 14 and 21. Also, ECM-functionalized hydrocolloids promoted the formation of hair follicles. Our findings suggest that ECM could enhance the wound healing properties of hydrocolloid wound dressings. This wound dressing could be considered for application in hard-to-heal acute wounds.

Hydrocolloids of Egg White and Gelatin as a Platform for Hydrogel-Based Tissue Engineering.

Innovative materials are needed to produce scaffolds for various tissue engineering and regenerative medicine (TERM) applications, including tissue models. Materials derived from natural sources that offer low production costs, easy availability, and high bioactivity are highly preferred. Chicken egg white (EW) is an overlooked protein-based material. Whilst its combination with the biopolymer gelatin has been investigated in the food technology industry, mixed hydrocolloids of EW and gelatin have not been reported in TERM. This paper investigates these hydrocolloids as a suitable platform for hydrogel-based tissue engineering, including 2D coating films, miniaturized 3D hydrogels in microfluidic devices, and 3D hydrogel scaffolds. Rheological assessment of the hydrocolloid solutions suggested that temperature and EW concentration can be used to fine-tune the viscosity of the ensuing gels. Fabricated thin 2D hydrocolloid films presented globular nano-topography and in vitro cell work showed that the mixed hydrocolloids had increased cell growth compared with EW films. Results showed that hydrocolloids of EW and gelatin can be used for creating a 3D hydrogel environment for cell studies inside microfluidic devices. Finally, 3D hydrogel scaffolds were fabricated by sequential temperature-dependent gelation followed by chemical cross-linking of the polymeric network of the hydrogel for added mechanical strength and stability. These 3D hydrogel scaffolds displayed pores, lamellae, globular nano-topography, tunable mechanical properties, high affinity for water, and cell proliferation and penetration properties. In conclusion, the large range of properties and characteristics of these materials provide a strong potential for a large variety of TERM applications, including cancer models, organoid growth, compatibility with bioprinting, or implantable devices.

Developing fisetin-AgNPs incorporated in reinforced chitosan/pullulan composite-film and its application of postharvest storage in litchi fruit

In this study, Toxicodendron vernicifluum fisetin chelated silver nanoparticles (FT-AgNPs) with outstanding antioxidant and antimicrobial activities were constructed via self-assembly. To surprise, 0.6 wt% FT-AgNPs was compatibly dispersed into the 1:1 chitosan/pullulan (CS/PUL, CP) matrix. The hydrogen bonding and electrostatic interaction between FT-AgNPs and CP, slightly increased the CP thermal stability, and greatly enhanced the tensile strength to 61.2 MPa, water vapor permeability below 20 kg/m2•d. Furthermore, after treated with the composite hydrocolloid film (FT-AgNPs/CP), the reactive oxygen species level of the treated Aspergillus niger cells was significantly increased, and the membrane permeability was enhanced. It effectively slowed down the decay of litchi fruit induced by microbial infection under the storage at 25 °C (15 d of the 0.6 % FT-AgNPs/CP treatment vs 9 d of the control). In addition, 0.024 μg/kg Ag+ residual in lichi pulp verified the qualified safety of the application of the 0.6 % FT-AgNPs/CP.

Flower extract-mediated green synthesis of bimetallic Cu[sbnd]Zn oxide nanoparticles and its antimicrobial efficacy in hydrocolloid films

Fruit packaging materials is highly essential in order to maintain freshness and safety from foodborne bacterial infections. Natural hydrocolloids are commonly used as fruit packaging materials to ensure safety and to reduce environmental pollution. However, their poor antibacterial efficacy is significant limitation in fruit packaging application. In the present work, bimetallic (Cu/Zn) nanoparticles (BM-Cu/Zn-NPs) were prepared using aqueous extract of Hibiscus rosa sinensis flowers along with thermal treatment. The surface morphological and chemical properties of the synthesized BM-Cu/Zn-NPs were examined by use of various specific characterization techniques. Furthermore, synthesized BM-Cu/Zn-NPs were incorporated into the hydrocolloids (chitosan (1.5 wt%) and pectin (0.5 wt%)) for the development of nanocomposites hybrid films with antimicrobial activity. The antimicrobial efficacy of the developed hydrocolloid films was evaluated via disc diffusion approach. The results of present study indicated that the BM-Cu/Zn-NPs containing hydrocolloid film could be a promising packaging material for fruit safety.

Exploiting Potential Biotechnological Applications of Poly-γ-glutamic Acid Low Molecular Weight Fractions Obtained by Membrane-Based Ultra-Filtration

Since the potentialities of applications of low molecular weight poly-γ-glutamic acid (γ-PGA) chains have been so far only partially explored, the separation of diverse molecular families of them, as well as their characterization for potential bioactivity and ability to form films, were investigated. Two different approaches based on organic solvent precipitation or on ultra- and nano-filtration membrane-based purification of inexpensive commercial material were employed to obtain size-specific γ-PGA fractions, further characterized by size exclusion chromatography equipped with a triple detector array and by ultra-high-performance liquid chromatography to assess their average molecular weight and their concentration. The γ-PGA low molecular weight fractions, purified by ultra-filtration, have been shown both to counteract the desiccation and the oxidative stress of keratinocyte monolayers. In addition, they were exploited to prepare novel hydrocolloid films by both solvent casting and thermal compression, in the presence of different concentrations of glycerol used as plasticizer. These biomaterials were characterized for their hydrophilicity, thermal and mechanical properties. The hot compression led to the attainment of less resistant but more extensible films. However, in all cases, an increase in elongation at break as a function of the glycerol content was observed. Besides, the thermal analyses of hot compressed materials demonstrated that thermal stability was increased with higher γ-PGA distribution po-lymer fractions. The obtained biomaterials might be potentially useful for applications in cosmetics and as vehicle of active molecules in the pharmaceutical field.

Formulation and characterisation of alginate hydrocolloid film dressing loaded with gallic acid for potential chronic wound healing

Background: A dramatic growth in the prevalence of chronic wounds due to diabetes has represented serious global health care and economic issues. Hence, there is an imperative need to develop an effective and affordable wound dressing for chronic wounds. Recent research has featured the potential of bioactive compound gallic acid (GA) in the context of wound recovery due to their safety and comparatively low cost. However, there is a scarcity of research that focuses on formulating GA into a stable and functional hydrocolloid film dressing. Thus, this present study aimed to formulate and characterise GA-loaded alginate-based hydrocolloid film dressing which is potentially used as low to medium suppurating chronic wound treatment. Methods: The hydrocolloid composite films were pre-formulated by blending sodium alginate (SA) with different combinations of polymers. The hydrocolloid films were developed using solvent-casting method and the most satisfactory film formulation was further incorporated with various GA concentrations (0.1%, 0.5% and 1%). The drug-loaded films were then characterised for their physicochemical properties to assess their potential use as drug delivery systems for chronic wound treatment. Results: In the pre-formulation studies, sodium alginate-pectin (SA-PC) based hydrocolloid film was found to be the most satisfactory, for being homogenous and retaining smoothness on surface along with satisfactory film flexibility. The SA-PC film was chosen for further loading with GA in 0.1%, 0.5% and 1%. The characterisation studies revealed that all GA-loaded films possess superior wound dressing properties of acidic pH range (3.97-4.04), moderate viscosity (1600 mPa-s-3198 mPa-s), optimal moisture vapor transmission rate (1195 g/m 2/day, 1237g/m 2/day and 1112 g/m 2/day), slower moisture absorption and film expansion rate and no chemical interaction between the GA and polymers under FTIR analysis. Conclusion: An SA-PC hydrocolloid film incorporated with gallic acid as a potentially applicable wound dressing for low to medium suppurating chronic wounds was successfully developed.

Formulation and characterisation of alginate hydrocolloid film dressing loaded with gallic acid for potential chronic wound healing.

Background: A dramatic growth in the prevalence of chronic wounds due to diabetes has represented serious global health care and economic issues. Hence, there is an imperative need to develop an effective and affordable wound dressing for chronic wounds. Recent research has featured the potential of bioactive compound gallic acid (GA) in the context of wound recovery due to their safety and comparatively low cost. However, there is a scarcity of research that focuses on formulating GA into a stable and functional hydrocolloid film dressing. Thus, this present study aimed to formulate and characterise GA-loaded alginate-based hydrocolloid film dressing which is potentially used as low to medium suppurating chronic wound treatment. Methods: The hydrocolloid composite films were pre-formulated by blending sodium alginate (SA) with different combinations of polymers. The hydrocolloid films were developed using solvent-casting method and the most satisfactory film formulation was further incorporated with various GA concentrations (0.1%, 0.5% and 1%). The drug-loaded films were then characterised for their physicochemical properties to assess their potential use as drug delivery systems for chronic wound treatment. Results: In the pre-formulation studies, sodium alginate-pectin (SA-PC) based hydrocolloid film was found to be the most satisfactory, for being homogenous and retaining smoothness on surface along with satisfactory film flexibility. The SA-PC film was chosen for further loading with GA in 0.1%, 0.5% and 1%. The characterisation studies revealed that all GA-loaded films possess superior wound dressing properties of acidic pH range (3.97-4.04), moderate viscosity (1600 mPa-s-3198 mPa-s), optimal moisture vapor transmission rate (1195 g/m 2/day, 1237g/m 2/day and 1112 g/m 2/day), slower moisture absorption and film expansion rate and no chemical interaction between the GA and polymers under FTIR analysis. Conclusion: An SA-PC hydrocolloid film incorporated with gallic acid as a potentially applicable wound dressing for low to medium suppurating chronic wounds was successfully developed.

Valorisation of Posidonia oceanica Sea Balls (Egagropili) as a Potential Source of Reinforcement Agents in Protein-Based Biocomposites.

Nanocrystalline cellulose (NC) and a lignin-containing fraction (LF) were obtained from egagropili, the so called sea balls produced from rhizome and stem fragments of Posidonia oceanica that accumulate in large amounts along the coastal beaches in the form of tightly packed and dry materials of various dimensions. Both egagropili fractions have been shown to be able to improve the physicochemical properties of biodegradable films prepared from protein concentrates derived from hemp oilseed cakes. These materials, manufactured with a biodegradable industrial by-product and grafted with equally biodegradable waste-derived additives, exhibited an acceptable resistance with a still high flexibility, as well as they showed an effective barrier activity against water vapor and gases (O2 and CO2). Furthermore, both NC and LF decreased film moisture content, swelling ability and solubility, thus indicating that both additives were able to improve water resistance of the hydrocolloid films. The exploitation of egagropili, actually considered only an undesirable waste to be disposed, as a renewable source of reinforcing agents to blend with different kinds of polymers is suggested.

Development of Moringa oleifera Standardized Leaf Extract Nanofibers Impregnated onto Hydrocolloid Film as A Potential Chronic Wound Dressing

This research focuses on the development of a hybrid dressing, i.e. Moringa oleifera (MOL) leave extract nanofibers impregnated onto an alginate-pectin hydrocolloid film for chronic wound healing. The MOL nanofibers impregnated hydrocolloid films were characterised and optimised by physicomechanical properties, moisture transmission, swelling ratio, microscopy analysis, Franz diffusion drug release and cell viability assays. From the preformulation studies, PEO 6 % solution with viscosity above 1.3 Pa·s was found suitable to be electrospun into uniform nanofibers (diameter 322.7±78.02 nm). The moisture transmission rate and swelling ratio studies revealed that the MOL nanofiber-film was useful for the application of light to medium suppurating wounds. The Franz diffusion cell study showed that the electrospun duration could influence the amount of MOL released from the nanofibers-film. Finally, cell viability assays revealed that the MOL nanofibers-films hybrid dressing did not cause cytotoxicity to human dermal fibroblast and human epithelial keratinocytes cell lines. In conclusion, a hybrid MOL nanofibers impregnated hydrocolloid films dressing was successfully formulated and this study has implied that MOL nanofibers-film could be an alternative treatment option for treating chronic wounds.

Healing Effect of Vicenin-2 (VCN-2) on Human Dermal Fibroblast (HDF) and Development VCN-2 Hydrocolloid Film Based on Alginate as Potential Wound Dressing.

Chronic wounds represent serious globally health care and economic issues especially for patients with hyperglycemic condition. Wound dressings have a predominant function in wound treatment; however, the dressings for the long-lasting and non-healing wounds are still a significant challenge in the wound care management market. Astonishingly, advanced wound dressing which is embedded with a synthetic drug compound in a natural polymer compound that acts as drug release carrier has brought about promising treatment effect toward injured wound. In the current study, results have shown that Vicenin-2 (VCN-2) compound in low concentration significantly enhanced cell proliferation and migration of HDF. It also regulated the production of pro-inflammatory cytokines such as IL-6, IL-1β, and TNF-α from HDF in wound repair. Treatment of VCN-2 also has facilitated the expression of TGF-1β and VEGF wound healing maker in a dose-dependent manner. A hydrocolloid film based on sodium alginate (SA) incorporated with VCN-2 synthetic compound which targets to promote wound healing particularly in diabetic condition was successfully developed and optimized for its physico-chemical properties. It was discovered that all the fabricated film formulations prepared were smooth, translucent, and good with flexibility. The thickness and weight of the formulations were also found to be uniform. The hydrophilic polymer comprised of VCN-2 were shown to possess desirable wound dressing properties and superior mechanical characteristics. The drug release profiles have revealed hydrocolloid film, which is able to control and sustain the VCN-2 released to wound area. In short, hydrocolloid films consisting of VCN-2 formulations are suitably used as a potential wound dressing to promote restoration of wound injury.

Improved shelf-life of Nabulsi cheese wrapped with hydrocolloid films

Chitosan- and bitter vetch protein-based films were prepared, characterized and applied as wrapping films of Nabulsi cheese, to improve the shelf-life of such dairy product widely consumed in the Middle East. Unsalted cheese wrapped with these hydrocolloid films was found to maintain the pH value of the fresh product during storage, whereas the pH of unwrapped samples was shown to progressively decrease. These findings were confirmed by the decrease in titratable acidity detected in the wrapped unsalted cheeses at 9th day of storage. Conversely, no effect was observed at different storage times in the weight loss of wrapped samples, compared to the unwrapped ones, stored both in the absence and presence of salts. However, chitosan films proved to be the most effective wrapping material in hindering microorganism growth in unsalted cheese. Hardness, chewiness and gumminess of the wrapped unsalted samples increased during storage, whereas no significant difference in springiness was observed between the wrapped and unwrapped cheeses, except for the protein-wrapped salted samples in which the springiness was observed to decrease slightly from the 3rd day onward. The proposed wrapping is suggested as an innovative packaging system of Nabulsi cheese to preserve over time its quality without brining.

Improvement of diabetic wound healing by topical application of Vicenin-2 hydrocolloid film on Sprague Dawley rats

BackgroundImpaired wound healing is a debilitating complication of diabetes that leads to significant morbidity, particularly foot ulcers. The risk of developing diabetic foot ulcers for diabetic patients is 15% over their lifetime and approximately 85% of limb amputations is caused by non–healing ulcers. Unhealed, gangrenous wounds destroy the structural integrity of the skin, which acts as a protective barrier that prevents the invasion of external noxious agents into the body. Vicenin-2 (VCN-2) has been reported to contain prospective anti-oxidant and anti-inflammatory properties that enhance cell proliferation and migration. Sodium Alginate (SA) is a natural polysaccharide that possesses gel forming properties and has biodegradable and biocompatible characteristics. Therefore, the objective of this study is to evaluate the effect of SA wound dressings containing VCN-2 on diabetic wounds.MethodsWounds were inflicted in type-1 diabetic-streptozotocin (STZ) induced male Sprague Dawley rats. Subsequently, relevant groups were topically treated with the indicated concentrations (12.5, 25 and 50 μM) of VCN-2 hydrocolloid film over the study duration (14 days). The control group was treated with vehicle dressing (blank or allantoin). Wounded tissues and blood serum were collected on 0, 7 and 14 days prior to sacrifice. Appropriate wound assessments such as histological tests, nitric oxide assays, enzyme-linked immunosorbent assays (ELISA) and immunoblotting assays were conducted to confirm wound healing efficacy in the in vivo model. One-way Analysis of Variance (ANOVA) was used for statistical analysis.ResultsResults showed that hydrocolloid film was recapitulated with VCN-2 enhanced diabetic wound healing in a dose-dependent manner. VCN-2 reduced pro-inflammatory cytokines (IL-1β, IL-6 and TNF-α), mediators (iNOS and COX-2), and nitric oxide (NO) via the NF-κB pathway. Data suggests that the VCN-2 film facilitated healing in hyperglycemic conditions by releasing growth factors such as (VEGF and TGF-β) to enhance cell proliferation, migration, and wound contraction via the VEGF and TGF-β mechanism pathways.ConclusionsThis study’s findings suggest that VCN-2 may possess wound healing potential since topical treatment with VCN-2 hydrocolloid films effectively enhanced wound healing in hyperglycemic conditions.

Moringa oleifera standardised aqueous leaf extract-loaded hydrocolloid film dressing: in vivo dermal safety and wound healing evaluation in STZ/HFD diabetic rat model.

Previously, Moringa oleifera leaf (MOL) standardised aqueous extract-loaded films were successfully developed and they showed potential wound healing activity in vitro. The objective of this study was to evaluate in vivo dermal safety as well as wound healing efficacy of these MOL film dressings (containing 0.1, 0.5 and 1% MOL) on diabetic rat model. The acute dermal toxicity was carried out on healthy rats, and signs of toxicity over 14days were observed. For wound healing studies, excision and abrasion wounds were created out on the STZ/HFD-induced diabetic rat model and the wound healing was studied over 21days. The wound healing evaluation determined by histology staining, hydroxyproline assay and ELISA assays on wound healing related-growth factors, cytokines and chemokines. MOL film formulations exhibited no signs of dermal toxicities. In excision wound model, 0.5% film significantly enhanced the wound closure by 77.67 ± 7.28% at day 7 compared to control group. While in abrasion wounds, 0.5% MOL films accelerated wound closure significantly at 81 ± 4.5% as compared to the control. The histology findings and hydroxyproline assay revealed that high collagen deposition and complete re-epithelialisation were observed for the wounds treated with 0.5 and 1% MOL films. All MOL film dressings had successfully tested non-toxic via in vivo safety dermal toxicity. It was concluded that the 0.5% MOL extract-loaded film had proven to be the most promising approach to accelerate diabetic wound healing process in both full-thickness excision and partial thickness abrasion wounds on the HFD/STZ-induced diabetic type II model.

Comparison of gamma radiation effects on natural corn and potato starches and modified cassava starch

The objective of this work was to evaluate the effect of irradiation treatment on physicochemical properties of three natural polymers, i.e. native potato and corn starches and a typical Brazilian product, cassava starch modified through fermentation -sour cassava- and also to prepare composite hydrocolloid films based on them. Starches were irradiated in a 60Co irradiation chamber in doses up to 15kGy, dose rate about 1kGy/h. Differences were found in granule size distribution upon irradiation, mainly for corn and cassava starch but radiation did not cause significant changes in granule morphology. The viscosity of the potato, corn and cassava starches hydrogels decreased as a function of absorbed dose. Comparing non-irradiated and irradiated starches, changes in the Fourier transform infrared (FTIR) spectra in the 2000–1500cm−1 region for potato and corn starches were observed but not for the cassava starch. Maximum rupture force of the starch-based films was affected differently for each starch type; color analysis showed that doses of 15kGy promoted a slight rise in the parameter b* (yellow color) while the parameter L* (lightness) was not significantly affected; X-ray diffraction patterns remained almost unchanged by irradiation.

Optimization, characterization, and in vitro assessment of alginate-pectin ionic cross-linked hydrogel film for wound dressing applications

Natural polymer-based hydrogel films have great potential for biomedical applications and are good candidates for wound dressings. In this study, we aimed to develop simvastatin-loaded crosslinked alginate-pectin hydrogel films by ionic crosslinking to improve the mechanical characteristics, wound fluid uptake and drug release behavior. Alginate-pectin hydrocolloid films were chemically crosslinked by immersing in different concentrations of CaCl2 (0.5–3% w/v) for 2–20min. The degree of crosslinking was influenced by both contact time and CaCl2 concentration. The optimized conditions for crosslinking were 0.5% and 1% (CaCl2) for 2min. The optimized hydrogel films were then characterized for their physical, mechanical, morphological, thermal, in vitro drug release, and cytocompatibility profiles. Crosslinking improved the mechanical profile and wound fluid uptake capacity of dressings. The hydrogel films were able to maintain their physical integrity during use, and the best results were obtained with the film in which the extent of crosslinking was low (0.5%). Thermal analysis confirmed that the crosslinking process enhanced the thermal stability of hydrogel films. Sustained, slow release of simvastatin was obtained from the crosslinked films and in vitro cytotoxicity assay demonstrated that the hydrogel films were non-toxic.

Three interval thixotropy test to determine structural regeneration of a glucomannan based hydrocolloid film at air/water interface: Interfacial, molecular, thermal and surface characterization

This work appears to be the first example with respect to two points: First, a film from salep, a glucomannan based hydrocolloid was formed and characterized in terms of interfacial properties. Second, three interval thixotropy test (3ITT) was applied to determine effect of instant interfacial shear stress or shear rate on deformation and regeneration of salep glucomannan (SG) films at air/water interface. In order to assess the interfacial properties, the salep from which SG films was formed was also characterized in terms of compositional, molecular, thermal and surface properties. To determine interfacial properties, the SG films prepared at different concentrations (2–3%) were formed at the water/air interface. Amplitude and frequency sweeps were applied to characterize the structure of the films at equilibrium, revealing a gel-like structure of the SG films at equilibrium. 3ITT revealed that shear rate/stress levels at different concentrations resulted in a remarkable deformation in SG films whereas they were fully recoverable, showing regeneration after distortion by a steady shear flow, as demonstrated by decreasing deformation percentage (Dr) values and increasing time required for the recovery (Rtime) values at increasing concentrations. 3ITT appeared to be an effective tool to simulate and analyze effects of real pumping, mixing and instant stirring processes during production and handling steps of SG films. The SG films were proven to have improved interfacial properties, which suggests that they may be an alternative to other hydrocolloid based films in terms of adsorbing onto air-water interfaces to reduce surface and interfacial tensions.

Tuning the Functional Properties of Polysaccharide–Protein Bio‐Based Edible Films by Chemical, Enzymatic, and Physical Cross‐Linking

Among natural biopolymers, polysaccharides and proteins are very promising for biodegradable and edible wraps with different characteristics, so that their formulations can be tailor-made to suit the needs of a specific commodity. Films prepared from polysaccharides have good gas barrier properties but exhibit lower resistance to moisture compared to protein films (edible) or polylactide films (biodegradable). Protein-based films show better mechanical and oxygen barrier properties compared to polysaccharide films. For that reason, film performances may be enhanced by producing blend systems, where hydrocolloids (mixtures of proteins and/or polysaccharides) form a continuous and more cohesive network. However, the lower water barrier properties of hydrocolloid films and their lower mechanical strength in comparison with synthetic polymers limit their applications in food packaging. Therefore, the enhancement of biopolymer film properties has been studied to attain appropriate applications. This review provides an extensive synthesis of the improvement of the properties of edible polysaccharide-protein films by way of various chemical, enzymatic, and physical methods. These methods primarily aim at improving the mechanical resistance. They also permit to ameliorate the water and gas barrier properties and related functional properties.

Antimicrobial films based on cellulose-derived hydrocolloids. A synergetic effect of host–guest interactions on quality and functionality

A series of active films based on biodegradable cellulose-derived hydrocolloids capable of controlled release of antimicrobial propionic acid (PA) was prepared.β-Cyclodextrin (β-CD), usually used for encapsulation of lipophilic compounds, was utilized in this research to host the hydrophilic PA. It was found that addition of β-CD to the film forming solutions notably enhanced the hydrocolloid matrix capacity and resulted in up to a ten-fold increase in the amount of uploaded PA. In addition, β-CD resulted in a two-fold prolongation of the effective PA release duration. β-CD alone caused undesired effects on the physical, mechanical and morphological properties of the hydrocolloid films. Interestingly, when β-CD was combined with PA in the film formulation, its undesired effects were significantly subdued. The antifungal activity of the films was demonstrated on fresh harvested wheat grains. Films containing β-CD and PA were found to be effective in preventing fungal growth on wheat grains. Thus, incorporation of β-CD and PA in hydrocolloids matrices demonstrated a synergetic effect and resulted in the formation of biodegradable active films that benefit good physical and mechanical properties, high active agent content, prolonged release ability and effective antimicrobial properties.