Hybrid Structure Research Articles

Exfoliated MXene-AuNPs hybrid in sensing and multiple catalytic hydrogenation reactions.

The increasing use of nanomaterials in consumer products is expected to lead to environmental contamination sometime soon. As water pollution is a pressing issue that threatens human survival and impedes the promotion of human health, the search for adsorbents for removing newly identified contaminants from water has become a topic of intensive research. The challenges in the recyclability of contaminated water continue to campaign the development of highly reusable catalysts. Although exfoliated 2D MXene sheets have demonstrated the capability towards water purification, a significant challenge for removing some toxic organic molecules remains a challenge due to a need for metal-based catalytic properties owing to their rapid response. In the present study, we demonstrate the formation of hybrid structure AuNPs@MXene (Mo2CTx) during the sensitive detection of Au nanoparticle through MXene sheets without any surface modification, and subsequently its applications as an efficient catalyst for the degradation of 4-nitrophenol (4-NP), methyl orange (MO), and methylene blue (MB). The hybrid structure (AuNPs@MXene) reveals remarkable reusability for up to eight consecutive cycles, with minimal reduction in catalytic efficiency and comparable apparent reaction rate constant (Kapp) values for 4-NP, MB, and MO, compared to other catalysts reported in the literature.

Magnetic porous microspheres enhancing the anaerobic digestion of sewage sludge: Synergistic free and attached methanogenic consortia

The addition of exogenous materials is a commonly reported method for promoting the anaerobic digestion (AD) of sludge. However, most exogenous materials are nano-sized and their use encounters problems relating to a need for continuous replenishment, uncontrollability and non-recyclability. Here, magnetic porous microspheres (MPMs), which can be controlled by magnetic forces, were prepared and used to enhance the methanogenesis of sludge. It was observed that the MPMs were spherical particles with diameters of approximately 100 µm and had a stable macroporous hybrid structure of magnetic cores and polymeric shells. Furthermore, the MPMs had good magnetic properties and a strong solid–liquid interfacial electron transfer ability, suggesting that MPMs are excellent carriers for methanogenic consortia. Experimental results showed that the addition of MPMs increased methane production and the proportion of methane in biogas from AD by 100.0 % and 21.2 %, respectively, indicating the MPMs notably enhanced the methanogenesis of sludge. Analyses of variations in key enzyme activities and electron transfer in sludge samples with and without MPMs in AD revealed that the MPMs significantly enhanced the activities of key enzymes involved in hydrolysis, acidification and methanation. This was achieved mainly by enhancing the extracellular electron transfer to strengthen the proton motive force on the cell membrane, which provides more energy generation for methanogenic metabolism. A careful examination of the variations in the morphology, pore structure and magnetism of the MPMs before and after AD revealed that the MPMs increased the prevalence of many highly active anaerobes, and that this did not weaken the magnetic performance. The microbial community structure and metatranscriptomic analysis further indicated that the acetotrophic methanogens (i.e., Methanosaeta) were mainly in a free state and that CO2-reducing methanogens (i.e., Methanolinea and Methanobacterium) mainly adhered to the MPMs. The above synergistic metabolism led to efficient methanogenesis, which indicates that the MPMs optimised the spatial ecological niche of methanogenic consortia. These findings provide an important reference for the development of magnetic porous materials promoting AD.

A comprehensive study of deep learning for soil moisture prediction

Abstract. Soil moisture plays a crucial role in the hydrological cycle, but accurately predicting soil moisture presents challenges due to the nonlinearity of soil water transport and the variability of boundary conditions. Deep learning has emerged as a promising approach for simulating soil moisture dynamics. In this study, we explore 10 different network structures to uncover their data utilization mechanisms and to maximize the potential of deep learning for soil moisture prediction, including three basic feature extractors and seven diverse hybrid structures, six of which are applied to soil moisture prediction for the first time. We compare the predictive abilities and computational costs of the models across different soil textures and depths systematically. Furthermore, we exploit the interpretability of the models to gain insights into their workings and attempt to advance our understanding of deep learning in soil moisture dynamics. For soil moisture forecasting, our results demonstrate that the temporal modeling capability of long short-term memory (LSTM) is well suited. Furthermore, the improved accuracy achieved by feature attention LSTM (FA-LSTM) and the generative-adversarial-network-based LSTM (GAN-LSTM), along with the Shapley (SHAP) additive explanations analysis, help us discover the effectiveness of attention mechanisms and the benefits of adversarial training in feature extraction. These findings provide effective network design principles. The Shapley values also reveal varying data leveraging approaches among different models. The t-distributed stochastic neighbor embedding (t-SNE) visualization illustrates differences in encoded features across models. In summary, our comprehensive study provides insights into soil moisture prediction and highlights the importance of the appropriate model design for specific soil moisture prediction tasks. We also hope this work serves as a reference for deep learning studies in other hydrology problems. The codes of 3 machine learning and 10 deep learning models are open source.

Rapid and Facile Synthesis of Gold Trisoctahedrons for Surface-Enhanced Raman Spectroscopy and Refractive Index Sensing.

Au trisoctahedrons (TOHs) with sharp tips and high-index facets have exceptional properties for diverse applications, such as plasmon-enhanced spectroscopies, catalysis, sensing, and biomedicine. However, the synthesis of Au TOHs remains challenging, and most reported synthetic methods are time-consuming or involve complex steps, hindering the exploration of their potential applications. Herein, we present a facile and fast approach to prepare Au TOHs with high uniformity and good control over the final size and shape, all within less than 10 min of synthesis, for surface-enhanced Raman spectroscopy (SERS) and refractive index sensing. The size of the Au TOHs can be easily tailored over a wide range, from 39 to 268 nm, allowing a tuning of the plasmon resonance at wavelengths from visible to near-infrared regions. The exposed facets of the Au TOHs can also be varied by controlling the growth temperatures. The wide tunability of size and exposed facets of Au TOHs can greatly broaden the range of their applications. We have also encapsulated Au TOHs with zeolite imidazolate framework (ZIF-8), obtaining core-shell hybrid structures. With the ability to tune Au TOH size, we further assessed their SERS performances in function of their size by detecting 2-NaT in solution, exhibiting enhancement factors of the order of 105 with higher values when the LSPR is blue-shifted from the laser excitation wavelength. Au TOHs have been also compared for refractive index sensing applications against Au nanospheres, revealing Au TOHs as better candidates. Overall, this facile and fast method for synthesizing Au TOHs with tunable size and exposed facets simplifies the path toward the exploration of properties and applications of this highly symmetrical and high-index nanostructure.

Nonreciprocal superconducting transport and the spin Hall effect in gyrotropic structures

The search for superconducting systems exhibiting nonreciprocal transport and, specifically, the diode effect, has proliferated in recent years. This trend has encompassed a wide variety of systems, including planar hybrid structures, asymmetric SQUIDs, and certain noncentrosymmetric superconductors. A common feature of such systems is a gyrotropic symmetry, realized on different scales and characterized by a polar vector. Alongside time-reversal symmetry breaking, the presence of a polar axis allows for magnetoelectric effects, which, when combined with proximity-induced superconductivity, results in spontaneous non-dissipative currents that underpin the superconducting diode effect. With this symmetry established, we present a comprehensive theoretical study of transport in a lateral Josephson junction composed of a normal metal supporting the spin Hall effect, and attached to a ferromagnetic insulator. Due to the presence of the latter, magnetoelectric effects arise without requiring external magnetic fields. We determine the dependence of the anomalous currents on the spin relaxation length and the transport parameters commonly used in spintronics to characterize the interface between the metal and the ferromagnetic insulator. Therefore, our theory naturally unifies nonreciprocal transport in superconducting systems with classical spintronic effects, such as the spin Hall effect, spin galvanic effect, and spin Hall magnetoresistance. We propose an experiment involving measurements of magnetoresistance in the normal state and nonreciprocal transport in the superconducting state. Such experiment would, on the one hand, allow for determining the parameters of the model and thus verifying with a greater precision the theories of magnetoelectric effects in normal systems. On the other hand, it would contribute to a deeper understanding of the underlying microscopic origins that determine these parameters.

Synergistic Integration of Nanogenerators and Solar Cells: Advanced Hybrid Structures and Applications

AbstractThe rapid growth of global energy consumption and the increasing demand for sustainable and renewable energy sources have urged vast research into harnessing energy from various sources. Among them, the most promising approaches are nanogenerators (NGs) and solar cells (SCs), which independently offer innovative solutions for energy harvesting. This review paper presents a comprehensive analysis of the integration of NGs and SCs, exploring advanced hybrid structures and their diverse applications. First, an overview of the principles and working mechanisms of NGs and SCs is provided for seamless hybrid integrations. Then, various design strategies are discussed, such as piezoelectric and triboelectric NGs with different types of SCs. Finally, a wide range of applications are explored that benefit from the synergistic integration of NGs and SCs, including self‐powered electronics, wearable devices, environmental monitoring, and wireless sensor networks. The potential for these hybrid systems is highlighted to address real‐world energy needs and contribute to developing sustainable and self‐sufficient technologies. In conclusion, this review provides valuable insights into the state‐of‐the‐art developments in NGs and SCs integration, shedding light on advanced hybrid structures and their diverse applications.

Tuning and total resonant suppression of reflection in the photonic bandgap range of Bragg reflector by two-dimensional nanoparticle array

The influence of a dielectric layer with an embedded 2D array of metal nanoparticles on the spectral characteristics of a distributed Bragg reflector is theoretically studied and numerically validated. A significant dependence of the reflectivity of the hybrid structure on the location of the nanoparticle array relative to the maxima and minima of the optical field in the surface dielectric layer is demonstrated. It is found that the application of a dilute ensemble of nanoparticles (the interparticle distance is from 2 to 5 times larger than the nanoparticle size) in the region of high optical field localization makes it possible to obtain a total suppression of reflection in the photonic bandgap range of distributed Bragg reflector. Contrariwise, if the optical field is almost zero at the nanoparticle array location, its impact on the scattered light is negligible, that is, the resonant nanoparticles are masked by a highly reflective photonic structure. The target wavelength can be tuned inside the photonic bandgap range by adjusting the shape of nanoparticles and interparticle distance in the array.

Molecular beam epitaxy growth of superconducting tantalum germanide

Developing alternative material platforms for use in superconductor–semiconductor hybrid structures is desirable due to limitations caused by intrinsic microwave losses present in commonly used III/V material systems. With the recent reports on tantalum superconducting qubits that show improvements over the Nb and Al counterparts, exploring Ta the superconductor in hybrid material systems is promising. Here, we study the growth of Ta on semiconducting Ge (001) substrates grown via molecular beam epitaxy. We show that at a growth temperature of 400 °C, the Ta diffuses into the Ge matrix in a self-limiting nature resulting in smooth and abrupt surfaces and interfaces with roughness on the order of 3–7 Å as measured by atomic force microscopy and x-ray reflectivity. The films are found to be a mixture of Ta5Ge3 and TaGe2 binary alloys and form a native oxide that seems to form a sharp interface with the underlying film. These films are superconducting with a TC∼1.8−2 K and HC⊥∼1.88 T, HC∥∼5.1 T. These results show this tantalum germanide film to be promising for future superconducting quantum information platforms.

Enhancing char formation of flame retardant epoxy composites: Onigiri-like ZIF-67 modification with carboxymethyl β-cyclodextrin crosslinking

To enhance char formation of flame retardant epoxy (EP) composites, carboxymethyl β-cyclodextrin (CM-β-CD) is employed as an etchant for or ZIF-67 derivatives. In the early stage, etching plays a dominant role. The mismatch in size between CM-β-CD opening and ZIF-67 pore leads to the stacking of carboxyl cobalt complexes on the shell. When the reaction time is prolonged, crosslinking occurs between carboxyl and hydroxyl groups. Crosslinked CM-β-CD weakens and eventually stops the etching process. Triethyl phosphate (TEP), an additive to improve flame retardancy, is also absorbed on the shell in this one-pot synthesis. Herin, the synthesis of metal-organic framework (MOF) derivatives can impart multiple functions to MOF. This novel nanohybrid significantly improved flame retardancy of EP composites with only 2.0 wt% loading. The peak heat release rate (pHRR) and total smoke production (TSP) were reduced by 54.8 and 46.9%, respectively. The integrated multi-element system resulted in an expanded and reinforced char layer. This study proposes a simple and precise method for controlling the structure of MOF-carbohydrate hybrids through competition between chemical reactions.

Defect engineering in transition‐metal (Fe, Co, and Ni)‐based electrocatalysts for water splitting

AbstractElectrocatalytic water splitting seems to be an efficient strategy to deal with increasingly serious environmental problems and energy crises but still suffers from the lack of stable and efficient electrocatalysts. Designing practical electrocatalysts by introducing defect engineering, such as hybrid structure, surface vacancies, functional modification, and structural distortions, is proven to be a dependable solution for fabricating electrocatalysts with high catalytic activities, robust stability, and good practicability. This review is an overview of some relevant reports about the effects of defect engineering on the electrocatalytic water splitting performance of electrocatalysts. In detail, the types of defects, the preparation and characterization methods, and catalytic performances of electrocatalysts are presented, emphasizing the effects of the introduced defects on the electronic structures of electrocatalysts and the optimization of the intermediates' adsorption energy throughout the review. Finally, the existing challenges and personal perspectives of possible strategies for enhancing the catalytic performances of electrocatalysts are proposed. An in‐depth understanding of the effects of defect engineering on the catalytic performance of electrocatalysts will light the way to design high‐efficiency electrocatalysts for water splitting and other possible applications.

Elucidating the Energy Storage Performance of 2D Metallic Vanadium Ditelluride/Carbon Nanotube for Next‐Generation Asymmetric Supercapacitors Using Emerging MoSSe/Carbon Nanotube

Recently, vanadium ditelluride (VTe2) a member of the transition metal ditellurdies family has emerged as a functional material for energy storage applications owing to its exotic intrinsic properties. Similar to most of the nanostructured materials, a hybrid structure of VTe2 is expected to provide enhanced energy storage capability. Herein, two hybrid structures of VTe2 are engineered using well‐explored nanocarbons such as RGO and carbon nanotube (CNT) to create a compelling supercapacitor electrode material. Both the hybrid structures show improved electrochemical activity, but VTe2/CNT fared better in the charge storage efficiency. The enhanced active sites, short ionic/electronic pathways provided by the CNT network, and the large electric double‐layer contribution have synergized for the inflated capacitance of VTe2/CNT. Further, a high‐performance asymmetric supercapacitor (ASC) of VTe2/CNT//MoSSe/CNT is constructed in a typical Swagelok cell, and the ASC delivered an energy density output of 36.28 Wh kg−1 at a power density of 463.16 W kg−1 with a remarkable 80.26% capacitance retention. The results of this work suggest that VTe2/CNT is a promising contender in the pantheon of functional materials for energy storage applications in the near future.

Preparation of poly(methyl methacrylate)-zinc oxide hybrid nanoparticles via miniemulsion polymerization

The encapsulation of zinc oxide (ZnO) nanoparticles with poly(methyl methacrylate) in the presence of triethylene glycol dimethacrylate (TEGDMA) as a crosslinking agent was synthesized by the miniemulsion polymerization technique. The ZnO as a catalyze was varied from 1 wt% - 7 wt%. Several techniques were used to analyze the PMMA/TEGDMA/ZnO hybrid. The morphology and particle size distribution of the PMMA hybrid was observed using a field emission scanning electron microscope (FE-SEM). The diameter of the PMMA/TEGDMA/ZnO hybrid was in the range of 57 nm to 115 nm. The morphology of the PMMA/ZnO hybrids was sphere-shaped with a narrow particle size distribution and no agglomeration of the hybrids occurred. The encapsulation and crystalline structure of the PMMA ZnO hybrid were determined using a high-resolution transmission electron microscope (HR-TEM). The HR-TEM image demonstrated that the ZnO was encapsulated in the PMMA hybrid. In addition, the high magnification of the TEM image demonstrated the lattice spacing of ZnO and the diffraction mode image presented the crystalline structure of ZnO. Therefore, the photocatalytic properties of the PMMA/ZnO hybrid were examined via the degradation of methylene blue (MB) solution under dark and UV-A irradiation. It was found that the photocatalytic activities of the PMMA/ZnO hybrid increased when the ZnO content increased up to 7 wt%. The maximum MB degradation for PMMA/TEGDMA/ZnO 7 wt% and PMMA/ZnO 7 wt% were 80.1 % and 77.6 %, respectively. Thus, the photocatalytic efficiency of the PMMA/ZnO increased in the presence of TEGDMA as a crosslinking agent.

Tailoring Tamm Plasmon Resonances in Dielectric Nanoporous Photonic Crystals.

The fields of plasmonics and photonic crystals (PCs) have been combined to generate model light-confining Tamm plasmon (TMM) cavities. This approach effectively overcomes the intrinsic limit of diffraction faced by dielectric cavities and mitigates losses associated with the inherent properties of plasmonic materials. In this study, nanoporous anodic alumina PCs, produced by two-step sinusoidal pulse anodization, are used as a model dielectric platform to establish the methodology for tailoring light confinement through TMM resonances. These model dielectric mirrors feature highly organized nanopores and narrow bandwidth photonic stopbands (PSBs) across different positions of the spectrum. Different types of metallic films (gold, silver, and aluminum) were coated on the top of these model dielectric mirrors. By structuring the features of the plasmonic and photonic components of these hybrid structures, the characteristics of TMM resonances were studied to elucidate effective approaches to optimize the light-confining capability of this hybrid TMM model system. Our findings indicate that the coupling of photonic and plasmonic modes is maximized when the PSB of the model dielectric mirror is broad and located within the midvisible region. It was also found that thicker metal films enhance the quality of the confined light. Gas sensing experiments were performed on optimized TMM systems, and their sensitivity was assessed in real time to demonstrate their applicability. Ag films provide superior performance in achieving the highest sensitivity (S = 0.038 ± 0.001 nm ppm-1) based on specific binding interactions between thiol-containing molecules and metal films.

Design and analysis of 4-bit absolute-value comparator in 65nm technology using hybrid TG/CMOS

Comparators are an important part of the calculator architecture, and rapid advances in semiconductor and electronics technology have placed higher demands on their performance. Optimization of digital systems involves several levels in order to make improvements in their power consumption, delay, and other parameters. This paper designs a low-power, high speed, and area efficient 4-bit absolute-value comparator, which utilizes a static Complementary Metal-Oxide-Semiconductor (CMOS) and Transmission Gate (TG) hybrid structure. The design optimizes the system at the level of separate circuit blocks, logic gates and transistors. The logic functions are realized by means of transcoding and magnitude Comparison, and the input signals are all driven by two-stage inverters. MUX and XOR with excellent performance of TG structure are implemented using simulation and analysis. In this paper, the transistor sizes and supply voltages of each logic gate are calculated and optimized using MATLAB by applying logic effort theory. The design uses a 65nm technology, and transient simulation of the overall system in Cadence successfully realizes its logic functions with 0.83ns delay and 49.6uw power consumption, proving the effectiveness of the design. This study based on theoretical calculations and simulations is a good reference for the design and theoretical study of very large-scale integrated circuits (VLSI).

Plasmonic Au3Cu Ordered Nanocrystals Induced Phase Transformation in 2D‐MoS2 for Efficient Hydrogen Evolution

AbstractThe synthesis of ordered gold‐copper (Au3Cu) alloy nanocrystals (≈10 nm) is reported and used in the semiconductor (2H) to metallic (1T) phase transformation of an atomically thin large‐area 2D‐MoS2 grown via CVD technique. The ordered Au3Cu nanocrystals are dispersed over 2D‐MoS2, and the phase transformation is confirmed via Raman spectroscopy followed by X‐ray photoelectron spectroscopy (XPS), while the surface properties of the Au3Cu/2D‐MoS2 is determined by the XPS valence band analysis and ultra‐violet photoemission spectroscopy (UPS). By comparing overpotential and Tafel slopes for Hydrogen Evolution Reaction (HER), a decrease is observed in overpotential by 83.2 mV and Tafel slope by ≈58.25 mV per decade for Au3Cu/MoS2 on light irradiation. This electrocatalytic enhancement of Au3Cu/MoS2 refers to the transformation of semiconducting 2D‐MoS2 to metallic phase under light illumination, thereby altering the surface electronic structures, improving carrier concentrations, lowering the valence band edge, and lowering the free energy of H* adsorption/desorption. Density functional theory (DFT) calculations, along with other surface characterizations, further illustrate that the ordered nanocrystal‐induced phase transformation in 2D‐MoS2 leads to a more durable metallic characteristic, thus, enhancing the surface electrical conductivity, reducing surface potential and Gibbs free energy, and improving the kinetics of photoelectrocatalytic performance of the hybrid structure.

Independently tunable dual Fano resonances based on plasmonic MIM Sagnac loop coupling Taiji resonator

In this paper, we first propose and demonstrate independently tunable dual Fano resonances based on a plasmonic structure composed of MIM (metal-insulator-metal) Sagnac loop with embedded Taiji resonator. An S-shaped crossover branch inside the Taiji ring resonator can tailor the propagating modes into their counter-propagating directions, finally tuning the number of whispering-gallery modes (WGMs) in Taiji resonator. Both Fano resonances originate from the interference between the discrete state generated from WGMs in Taiji resonator and continuous state from modes propagating in the plasmonic Sagnac loop. By stuffing a silver circle area (SCA) inside S-shaped branch, dual Fano resonances can be tuned independently as SCA has different sizes or locates at different places. Fano resonance would be influenced and shifted strongly when SCA locates at the energy intensity valley of WGM, while without any influence as SCA situates at the energy intensity peak of WGM. Thanks to the strong sub-wavelength light confinement of dual Fano resonances based on MIM plasmonic system, an optical refractometric sensor with figure of merit (FOM) of 100/RIU and high sensitivity of 1899 nm/RIU is demonstrated. Furthermore, this hybrid structure is also used for temperature sensing of ethanol with the maximal sensitivity of −0.793 nm/°C. This compact plasmonic Sagnac loop coupling Taiji resonator demonstrates impressive practical prospects for high-sensitivity biochemical sensors, nonlinear optics, and optical modulation.

Non-magnetic four-port electronic circulators based on 90∘\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$90^\\circ $$\\end{document} non-reciprocal phase-shifters

This paper presents a family of four-port electronic circulators adhering to a new topology symmetry that enables linear, low-loss transistor-based circuit implementations. The underlying principle of operation employs a property of the 90∘\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$90^\\circ $$\\end{document} non-reciprocal phase shifter (NRPS) derived in this article. Under quadrature excitation, the NRPS transfers or reflects exciting signals depending on their respective phase lead. The fundamental topology consists of two back-to-back quadrature hybrid couplers with a 90∘\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$90^\\circ $$\\end{document} NRPS connected in parallel over the line of symmetry, interrupting the circuit’s reciprocity to achieve circular propagation by bypassing or reflecting at the NRPS but not through. We break down the circuit into three fundamental four-port sub-circuits. The transfer function of the cascaded sub-circuits enables an analysis with specific hybrid couplers. It also allows a synthesis of other four-port passive sub-circuits that, with an NRPS, achieve a four-port circulator transfer function by solving a matrix equation. Some of the mathematical solutions have circuit realizations, which are adjusted quadrature hybrid structures that differ from each other by the characteristic impedance of their arms. Two familiar solutions, including the standard quadrature hybrid and a modified design with equal Z0\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$Z_0$$\\end{document}, λ/4\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\lambda /4$$\\end{document} arms, are simulated utilizing lossless lumped element arms and a 4-Path, 65-nm NMOS 90∘\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$90^\\circ $$\\end{document} NRPS. The simulation results verify the theoretical analysis and enable a comparison between the performance of the two circuit solutions around 1 GHz. The four-port circulator with equal arms is implemented on a PCB and measured, yielding better than 1.5 dB insertion loss between the circulator ports, over 17 dB port-to-port reverse isolation, and better than 20 dBr port matching around 1 GHz.

High Electric Field Enhancement Induced by Modal Coupling for a Plasmonic Dimer Array on a Metallic Film

A giant electric field on a subwavelength scale is highly beneficial for boosting the light–matter interaction. In this paper, we investigated a hybrid structure consisting of a hemispheric dimer array and a gold film and realized resonant mode coupling of the surface lattice resonance (SLR) and surface plasmon polariton (SPP). Mode coupling is demonstrated by observing anti-crossing in reflection spectra, which corresponds to Rabi splitting. Although the resonance coupling does not enter the strong coupling regime, an improved quality factor (Q~350) and stronger electric field enhancement in the gap region of the dimer (i.e., hot spot) in our hybrid structure are obtained compared to those of the single dimer or dimer array only. Remarkably, the magnitude of electric field enhancement over 500 can be accessible. Such high field enhancement makes our hybridized structure a versatile platform for the realization of ultra-sensitive biosensing, low-threshold nanolasing, low-power nonlinear optical devices, etc.

Nitric oxide polymersome-immobilized hydrogels for prevention of post-surgical tumor recurrence and metastasis

Surgical resection is the primary means of tumor treatment. However, postoperative tumors are prone to recurrence and metastasis due to residual tumor cells and complicated post-surgical microenvironments. The absence of effective intervention strategies for regulating the recurrent tumor microenvironment frequently leads to unfavorable prognostic outcomes. To address this issue, a biodegradable nitric oxide donor (NO) polymersome-immobilized hydrogel platform (NO-GEL) was constructed by using biodegradable functional polycarbonates. The polymersomes from NO-GEL were utilized to load immune checkpoint inhibitors of anti-programmed cell death protein 1 antibody (αPD1) for synergistic postoperative cancer therapy. The αPD1-loaded NO-GEL (NO-GEL@αPD1) was characterized with reduction-responsive NO and αPD1 release in the emergence of recurrent tumor exhibiting gas/immunotherapeutic activity via NO-mediated microenvironment reprogramming and immune checkpoint blocking. More importantly, covalent-embedded polymersomes in the hydrogel prevented the endocytosis of αPD1 and increased the therapeutic efficiency for cell membrane target inhibition. The hybrid structure further avoided the sudden release of cargos and realized the on-demand release of bioactive agents when exposed to recurrent tumor cells. The in vivo results demonstrated that the platform could effectively inhibit tumor recurrence and metastasis on mouse models, suggesting a high potential for the combined treatment of postoperative tumor recurrence and metastasis.

Highly sensitive hybrid silicon carbonitride piezoresistive sensors enabled by coupling piezoelectric effect

Piezoresistive sensors with high working temperature and excellent sensitivity are highly desired for in-situ measuring pressure in various high temperature applications. Polymer-derived silicon carbonitrides (SiCNs) are a novel class of materials with excellent stability and piezoresistive performance at high temperature, yet challenging to build to meet the rapid growth of large-area electronics. This work demonstrates a thin and highly sensitive hybrid SiCN piezoresistive films enabled by coupling piezoelectric effect of Al-doped ZnO (AZO). The hybrid thin films with the optimal nano-domain phase of SiCN features ultrahigh gauge factors of 6518 to 31,195 upon various compressive stresses, which are significantly larger than those of single-layer SiCN and other existing piezoresistive materials. First-principles calculations reveal that the charges from AZO layer accumulate and move toward the carbon clusters in SiCN under compressive stress, resulting in greater tunneling currents between carbon clusters and more significant piezoresistive effect. Moreover, superior piezoresistive performance of the optimal hybrid system can be characterized by atomic-scale binding energy and band gap change, as formation of the hybrid structure facilitates interfacial charge separation and increases density of electron at conduction band. This work opens an avenue for improving sensitivity of piezoresistive sensors by effective coupling of piezoelectric materials.