Hybrid Organic-inorganic Metal Halide Research Articles

Dual-emissive luminescence in OIHMH single crystals: tunable red-green emissions via Mn2+ doping and theoretical insights.

The burgeoning demand for materials with tunable photoluminescence properties for applications has necessitated the exploration of novel luminescent materials. This study presents the synthesis and characterization of a novel 0D organic-inorganic hybrid metal halide (OIHMH) single crystal, C6H14N2CdBr4, which exhibits intriguing luminescent properties upon Mn2+ doping. The introduction of single Mn2+ ions results in a dual-emission, with the unexpected emergence of a red emission peak at 627 nm, in addition to the conventional tetrahedral green emission at 525 nm. This dual-emission is attributed to the distinct inter-tetrahedral distances within the crystal structure of C6H14N2CdBr4 with varying distances between [CdBr4]2- tetrahedra, influencing the spatial distribution and interaction of the [MnBr4]2- tetrahedra. Electron paramagnetic resonance (EPR) spectroscopy and theoretical calculations reveal the 627 nm and 525 nm emissions are attributed to the d-d transition of magnetic coupled Mn2+-Mn2+ pairs and isolated Mn2+ ions, respectively. This study not only advances the understanding of the luminescence mechanisms of Mn2+ but also paves the way for the development of tunable luminescent materials.

High-efficiency color-tunable ultralong room-temperature phosphorescence from organic-inorganic metal halides via synergistic inter/intramolecular interactions.

Materials exhibiting highly efficient, ultralong and multicolor-tunable room-temperature phosphorescence (RTP) are of practical importance for emerging applications. However, these are still very scarce and remain a formidable challenge. Herein, using precise structure design, several novel organic-inorganic metal-halide hybrids with efficient and ultralong RTP have been developed based on an identical organic cation (A). The original organic salt (ACl) exhibits red RTP properties with low phosphorescence efficiency. However, after embedding metals into the organic salt, the changed crystal structure endows the resultant metal-halide hybrids with excellent RTP properties. In particular, A2ZnCl4·H2O exhibits the highest RTP efficiency of up to 56.56% with a long lifetime of up to 159 ms. It is found that multiple inter/intramolecular interactions and the strong heavy-atom effect of the rigid metal-halide hybrids can suppress molecular motion and promote the ISC process, resulting in highly stable and localized triplet excitons followed by highly efficient RTP. More crucially, multicolor-tunable fluorescence and RTP achieved by tuning the metal and halogen endow these materials with wide application prospects in the fields of multilevel information encryption and dynamic optical data storage. The findings promote the development of phosphorescent metal-halide hybrids for potential high-tech applications.

Zero-dimensional hybrid tin halides with stable broadband light emissions.

Considering the instability and toxicity of 3D Pb-based perovskite nanocrystals, lead-free low-dimensional organic-inorganic hybrid metal halides have attracted widespread attention as potential substitutes. Herein, two new tin-based 0D halides [H4BAPP]SnBr5·Br and [H4BAPP]SnCl5·Cl·H2O (BAPP = 1,4-bis(3-aminopropyl)piperazine) were synthesized successfully based on [SnX5]3- as an emission center. Typically, [H4BAPP]SnBr5·Br and [H4BAPP]SnCl5·Cl·H2O display broadband yellow and yellow-green light emissions originating from the radiative recombination of self-trapped excitons (STEs). The photoluminescence quantum yields (PLQYs) of the two compounds were calculated to be 19.27% and 2.36%, respectively. Furthermore, the excellent chemical and thermal stability and broadband light emissions reveal their potential application in solid-state white lighting diodes.

Tellurium(IV) Halide Achieving Effective Nonlinear-Optical Activity: The Role of Chiral Ligands and Lattice Distortion.

Chiral organic-inorganic hybrid metal halides are a promising class of nonlinear-optical materials with unique optical properties and flexible crystal structures. However, the structures and properties of chiral hybrid tellurium halides, especially second harmonic generation (SHG), have not been reported. Here, by introducing chiral organic molecule (R/S)-methylbenzylammonium (R/S-MBA), we synthesized a pair of novel zero-dimensional (0D) chiral tellurium-based hybrid halides with noncentrosymmetric space group C2, (R/S-MBA)2TeCl6 (R/S-Cl). Single-crystal X-ray diffraction analysis and solid-state circular dichroism (CD) spectra confirm that R/S-Cl shows obvious enantiomer enrichment. Moreover, the resulting chiral products present an efficient SHG response. Interestingly, through manipulation of halogen atoms, two pairs of achiral tellurium halides, (R/S-MBA)2TeBr6 (R/S-Br) and (R/S-MBA)2TeI6 (R/S-I), were obtained, both of which crystallize in the centrosymmetric space group R3̅. It is noteworthy that R/S-I has a narrow band gap of 1.55 eV, which is smaller than that of most 0D metal halides and comparable to that of three-dimensional lead halide, showing its potential as a highly efficient light absorber.

Efficient green emission in organic-inorganic hybrid (C13H22N)2MnCl4 metal halides with large Mn–Mn spacing distance

Organic-inorganic hybrid metal halides hold considerable potential for diverse applications, including light-emitting diodes, display diodes, liquid crystal displays, and photodetectors, owing to their exceptional optical properties. Herein, we successfully synthesized lead-free zero-dimensional (0D) (C13H22N)2MnCl4 metal halide single crystals with green emission, employing an anti-solvent method. The (C13H22N)2MnCl4 single crystals, featuring four-coordinated Mn2+, exhibit pronounced green emission at 528 nm and demonstrate a photoluminescence quantum yield (PLQY) of approximately 72 %. This emission is attributed to the 4T1(G)-6A1(S) transition and the considerable Mn–Mn spacing distance between adjacent [MnCl4]2- tetrahedra. The photoluminescence spectra during thermal cycling underscore the exceptional optical stability of the (C13H22N)2MnCl4 material. These organic-inorganic hybrid manganese halides emerge as a compelling and novel candidate for future light-emitting diode materials.

Antimony Bromide Organic-Inorganic Hybrid Compound with a Long-Chain Diamine Showing Switchable Phase Transition and Second-Harmonic Generation Properties.

Organic-inorganic hybrid metal halides have attracted significant attention in recent years due to their excellent optoelectronic properties and potential applications in solar cells. Herein, the organic-inorganic hybrid molecule [N,N-dimethyl-1,3-propanediamine]SbBr5 (1) was synthesized by reacting a long-chain organic diamine N,N-dimethyl-1,3-propanediamine with SbBr3 as a metal halide precursor in HBr aqueous solution. Compound 1 possesses a one-dimensional chainlike structure with the second-harmonic generation switch and two continuous phase transitions above room temperature. The band gap of compound 1 is about 2.62 eV, exhibiting a semiconductive property, which may have important implications for the development of new optoelectronic devices.

Free Halogen Substitution of Chiral Hybrid Metal Halides for Activating the Linear and Nonlinear Chiroptical Properties.

Halogen substitution has been proven as an effective approach to the band gap engineering and optoelectronic modulation of organic-inorganic hybrid metal halide (OIHMH) materials. Various high-performance mixed halide OIHMH film materials have been primarily obtained through the substitution of coordinated halogens in their inorganic octahedra. Herein, we propose a new strategy of substitution of free halogen outside the inorganic octahedra for constructing mixed halide OIHMH single crystals with chiral structures, resulting in a boost of their linear and nonlinear chiroptical properties. The substitution from DMA4[InCl6]Cl (DMA = dimethylammonium) to DMA4[InCl6]Br crystals through a facile antisolvent vaporization method produces centimeter-scale single crystals with high thermal stability along with high quantum yield photoluminescence, conspicuous circularly polarized luminescence, and greatly enhanced second harmonic generation (SHG). In particular, the obtained DMA4[InCl6]Br single crystal features an intrinsic chiral structure, exhibiting a significant SHG circular dichroism (SHG-CD) response with a highest reported anisotropy factor (gSHG-CD) of 1.56 among chiral OIHMH materials. The enhancements in both linear and nonlinear chiroptical properties are directly attributed to the modulation of octahedral distortion. The mixed halide OIHMH single crystals obtained by free halogen substitution confine the introduced halogens within free halogen sites of the lattice, thereby ensuring the stability of compositions and properties. The successful employment of such a free halogen substitution approach may broaden the horizon of the regulation of structures and the optoelectronic properties of the OIHMH materials.

The effect of different halogen atoms on the rigid and energy transfer of organic cations

Low-dimensional organic-inorganic hybrid metal halides (OIMHs) have become an emerging class of light-emitting materials. Two zero-dimensional (0D) lead-free organic (EnrofloH2)4Mn3X12 (X = Cl, Br) has been reported in this work. Upon 338 and 340 nm excitation, (EnrofloH2)4Mn3Cl12·2Cl and (EnrofloH2)4Mn3Br12·2Br exhibit emission peaking at 460, 514 nm and 460, 520 nm respectively. It was noticed that the choice of the halide could profoundly govern the luminescent subjects (ENR or Mn2+) through the altered energy transfer. Different halogens could influence the rigidity of ENR organic cations by changing their stacking patterns and band gaps, thus manipulating their luminescent properties. The bandgap behaviors have been revealed by density functional theory calculations. Based on the results, the emission of both compounds come from organic cations (EnrofloH22+) and 4D-6A1 transition of Mn2+ ions. The spectral interplay of these emission bands is governed by the temperature and the possibility of exchanging mechanisms between two emission centers.

The Scale Effects of Organometal Halide Perovskites.

Organometal halide perovskites have achieved great success in solution-processed photovoltaics. The explorations quickly expanded into other optoelectronic applications, including light-emitting diodes, lasers, and photodetectors. An in-depth analysis of the special scale effects is essential to understand the working mechanisms of devices and optimize the materials towards an enhanced performance. Generally speaking, organometal halide perovskites can be classified in two ways. By controlling the morphological dimensionality, 2D perovskite nanoplatelets, 1D perovskite nanowires, and 0D perovskite quantum dots have been studied. Using appropriate organic and inorganic components, low-dimensional organic-inorganic metal halide hybrids with 2D, quasi-2D, 1D, and 0D structures at the molecular level have been developed and studied. This provides opportunities to investigate the scale-dependent properties. Here, we present the progress on the characteristics of scale effects in organometal halide perovskites in these two classifications, with a focus on carrier diffusion, excitonic features, and defect properties.

Preliminary exploration of the influence of N+/NHx+ ions/groups bombardment at TiO2 ETLs on performance of MAPbI3 perovskite solar cells

The service stability of organic–inorganic hybrid metal halide perovskite solar cells (PSCs) is one of most important factors, which is seriously influenced by the decomposition of perovskite layer. Especially, the decomposition of perovskite layer could deteriorate the interface between perovskite layer and TiO2 electron transport layer (ETL). In this work, TiO2 ETLs are prepared by the sputtering technique and traditional spin-coating technique. Then, TiO2 ETLs are bombarded by N+/NHx+ ions/groups. PSCs with all TiO2 ETLs are prepared and measured. The results show that after bombardment, N+/NHx+ ions/groups could chemically react with Ti/O ions at surface of TiO2 ETLs. As a result, the conduction band minimum and transfer resistance of TiO2 ETLs both deteriorate, which decrease the power conversion efficiency of PSCs seriously. While, because anatase TiO2 (001) crystal face consists of saturated O/Ti ions and displays the highest surface free energy, TiO2 ETLs with anatase (001) preferred orientation displays the optimal restraint on deterioration of power conversion efficiency caused by N+/NHx+ ions/groups bombardment. Based on above results, TiO2 ETLs with anatase (001) preferred orientation should be the optimal one for PSCs, which could improve the service stability obviously.

Chiral Ruthenium Halide Semiconductor with Strong Antiferromagnetic Coupling

AbstractChiral hybrid organic–inorganic metal halides have attracted wide attention owing to their superior chiroptoelectronic and chirospintronic properties. Here, a new class of chiral lead‐free metal halides, (R/S‐MBA)3Ru2Br9 (MBA = methylbenzylammonium), with unique magnetic properties is reported. (R/S‐MBA)3Ru2Br9 is composed of a surface‐shared octahedron dimer separated by chiral cations and crystallizes into the Sohncke space group of P212121. The crystal structures, chiroptical, magnetic properties, and magnetic circular dichroism of (R/S‐MBA)3Ru2Br9 are systematically investigated. Owing to the strong antiferromagnetic coupling between the Ru atom through bromine bridge in the [Ru2Br9]3− dimer and the weak ferromagnetic coupling between the neighboring [Ru2Br9]3− dimer, (R/S‐MBA)3Ru2Br9 exhibits antiferromagnetic property with Néel temperature at 7 K. Considering the unique magnetic property of ruthenium, together with the rapid progress of antiferromagnetic spintronics and optospintronics recently, this work provides a novel multifunctional lead‐free chiral magnetic candidate toward chiral optoelectronics and antiferromagnetic spintronics.

Photoexcitation-induced passivation of SnO2 thin film for efficient perovskite solar cells.

A high-quality tin oxide electron transport layer (ETL) is a key common factor to achieve high-performance perovskite solar cells (PSCs). However, the conventional annealing technique to prepare high-quality ETLs by continuous heating under near-equilibrium conditions requires high temperatures and a long fabrication time. Alternatively, we present a non-equilibrium, photoexcitation-induced passivation technique that uses multiple ultrashort laser pulses. The ultrafast photoexcitation and following electron-electron and electron-phonon scattering processes induce ultrafast annealing to efficiently passivate surface and bulk defects, and improve the crystallinity of SnO2, resulting in suppressing the carrier recombination and facilitating the charge transport between the ETL and perovskite interface. By rapidly scanning the laser beam, the annealing time is reduced to several minutes, which is much more efficient compared with conventional thermal annealing. To demonstrate the university and scalability of this technique, typical antisolvent and antisolvent-free processed hybrid organic-inorganic metal halide PSCs have been fabricated and achieved the power conversion efficiency (PCE) of 24.14% and 22.75% respectively, and a 12-square-centimeter module antisolvent-free processed perovskite solar module achieves a PCE of 20.26%, with significantly enhanced performance both in PCE and stability. This study establishes a new approach towards the commercialization of efficient low-temperature manufacturing of PSCs.

Chiral induction and Sb3+ doping in indium halides to trigger second harmonic generation and circularly polarized luminescence

Recently, organic-inorganic hybrid metal halides (HMHs) have attracted extensive attention as promising multifunctional materials by virtue of their structural diversity and tunable photophysical properties. However, it remains a challenge to design HMHs with specific functions on demand. Herein, by introducing R/S-methylbenzylamine (R/S-MBA) and doping Sb3+, we have achieved both second harmonic generation (SHG) and circularly polarized luminescence (CPL) properties in lead-free indium halides. The introduction of chiral organic cations can break the symmetry and induce the indium halides to crystallize in the chiral space group. The Sb3+ with ns2 electronic configuration can serve as the dopants to promote the formation of self-trapped excitons, so as to activate highly efficient luminescence. As a result, the as-prepared Sb3+ doped (R/S-MBA)3InCl6 show not only SHG responses but also CPL signals with luminescence dissymmetry factor of −5.3 × 10−3 and 4.7 × 10−3. This work provides a new inspiration for the exploitation of chiral multifunctional materials.

Dimension-Controlled Synthesis of Hybrid-Mixed Halide Perovskites for Solar Cell Application.

Despite the rapid improvement of photovoltaic (PV) efficiency in hybrid organic-inorganic metal halide perovskites (HOIPs), the fabrication procedure of a compact thin film in a large-area application is still a tedious work. Apart from the quality of the thin film, the stability of the perovskite materials and the expensive organic hole transport layer (HTL) within the HOIP-based PV device are the major issues that need to be addressed prior to their commercialization. Herein, a unique glass rod-based facile fabrication technique for producing a compact and stable thin film utilizing a mixed-halide-based perovskite precursor solution is demonstrated. The fabricated devices deliver high photoconversion efficiency (PCE) without the use of any HTL and show an excellent stability under ambient conditions. By varying the organic CH3NH3I (MAI) and inorganic PbBr2 content, perovskite materials with different dimensions, i.e., 3D, 2D, and 1D, are synthesized to produce an active layer for PV devices. Although a 2D single-halide perovskite is reported earlier, herein two different mixed-halide 2D perovskites, i.e., MA2PbI2Br2 and MAPb2IBr4, are synthesized successfully, and their performance is compared in detail along with that of 1D and 3D mixed-halide perovskites. The facile synthesized mixed-halide 2D-based MA2PbI2Br2 perovskite shows a PCE of 10.14% with a high stability of 92% after 100 days without encapsulation, which is much superior as compared to that of the mixed-halide 3D MAPbIBr2. The semiconducting behavior as well as the nature of the bandgap of the synthesized compounds is examined by pursuing density functional theory calculations. Specifically, the role of iodine doping to modify the electronic band structure is investigated, and introduction of iodine is found to reduce the effective masses of both electrons and holes in the perovskite material.

Chiral Hybrid Germanium(II) Halide with Strong Nonlinear Chiroptical Properties

AbstractDue to the pronounced anisotropic response to circularly polarized light, chiral hybrid organic–inorganic metal halides have been regarded as promising candidates for the application in nonlinear chiroptics, especially for the second‐harmonic generation circular dichroism (SHG‐CD) effect. However, designing novel lead‐free chiral hybrid metal halides with large anisotropy factors and high laser‐induced damage thresholds (LDT) of SHG‐CD remains challenging. Herein, we develop the first chiral hybrid germanium halide, (R/S‐NEA)3Ge2I7⋅H2O (R/S‐NGI), and systematically investigated its linear and nonlinear chiroptical properties. S‐NGI and R‐NGI exhibit large anisotropy factors (gSHG‐CD) of 0.45 and 0.48, respectively, along with a high LDT of 38.46 GW/cm2; these anisotropy factors were the highest values among the reported lead‐free chiral hybrid metal halides. Moreover, the effective second‐order nonlinear optical coefficient of S‐NGI could reach up to 0.86 pm/V, which was 2.9 times higher than that of commercial Y‐cut quartz. Our findings facilitate a new avenue toward lead‐free chiral hybrid metal halides, and their implementation in nonlinear chiroptical applications.

Chiral Hybrid Germanium(II) Halide with Strong Nonlinear Chiroptical Properties.

Due to the pronounced anisotropic response to circularly polarized light, chiral hybrid organic-inorganic metal halides have been regarded as promising candidates for the application in nonlinear chiroptics, especially for the second-harmonic generation circular dichroism (SHG-CD) effect. However, designing novel lead-free chiral hybrid metal halides with large anisotropy factors and high laser-induced damage thresholds (LDT) of SHG-CD remains challenging. Herein, we develop the first chiral hybrid germanium halide, (R/S-NEA)3 Ge2 I7 ⋅H2 O (R/S-NGI), and systematically investigated its linear and nonlinear chiroptical properties. S-NGI and R-NGI exhibit large anisotropy factors (gSHG-CD ) of 0.45 and 0.48, respectively, along with a high LDT of 38.46 GW/cm2 ; these anisotropy factors were the highest values among the reported lead-free chiral hybrid metal halides. Moreover, the effective second-order nonlinear optical coefficient of S-NGI could reach up to 0.86 pm/V, which was 2.9 times higher than that of commercial Y-cut quartz. Our findings facilitate a new avenue toward lead-free chiral hybrid metal halides, and their implementation in nonlinear chiroptical applications.

Large Phase-Transition Temperature Enhancement Achieved in a Layered Lead Iodide Hybrid Crystal by H/F Substitution.

Organic-inorganic hybrid metal halides with structural flexibility and solution processability have been widely investigated for different application scenarios. However, the effective construction of phase-transition materials with a high phase-transition temperature (Ttr) for potential practical applications remains a great challenge, and reports on the regulation of Ttr with significant enhancement have been rare. In this manuscript, we have realized a large Ttr increase of 148 K in a layered hybrid lead iodide crystal (4-FTMBA)4Pb3I10 (4-FTMBA = 4-fluoro-N,N,N-trimethylbenzenaminium) by the H/F substitution strategy. Compared to the parent (TMBA)4Pb3I10 (TMBA = N,N,N-trimethylbenzenaminium), H/F substitution preserves the structural framework and crystal symmetry in (4-FTMBA)4Pb3I10. The introduction of heavier fluorine will significantly increase the motion barrier for the order-disorder transition, resulting in the remarkably improved Ttr. Temperature-dependent crystal structures, Raman spectra, and dielectric analyses well support the phase-transition behavior. In addition, evident thermochromism with a tunable direct band gap in (4-FTMBA)4Pb3I10 has been observed using UV-vis spectra. To the best of our knowledge, the achieved Ttr enhancement of 148 K by H/F substitution is the highest among the organic-inorganic hybrid lead halide phase-transition materials. This finding would greatly inspire the rational design of functional materials with high performance.

A High-Rigidity Organic-Inorganic Metal Halide Hybrid Enabling Reversible and Enhanced Self-Trapped Exciton Emission under High Pressure.

Zero-dimensional organic-inorganic metal halide hybrids provide ideal bulk-crystal platforms for exploring the pressure engineering of electron-phonon coupling (EPC) and self-trapped exciton (STE) emission at the molecular level. However, the low stiffness of inorganic clusters hinders the reversible tuning of these physical properties. Herein, we designed a Sb3+-doped metal halide with a high emission yield (89.4%) and high bulk modulus (35 GPa) that enables reversible and enhanced STE emission (20-fold) under pressure. The high lattice rigidity originates from the corner-shared cage-structured inorganic tetramers and ring-shaped organic ligands. Further, we reveal that the pressure-enhanced emission regime below 4.5 GPa is owing to the lattice hardening and preferably EPC strength reducing, while the pressure-insensitive emission regime within 4.5-8.5 GPa results from the enhanced intercluster Coulombic attraction force that resists intracluster compression. These results provide insights into the structure-property relation and molecular engineering of zero-dimensional metal halides toward wide-band and pressure-sensitive light sources.

Optical polarization properties of TPP2MnBr4 perovskite crystal adjusted by the self-trapping state.

Low-dimensional networked organic-inorganic hybrid metal halide crystal has become an emerging hotspot material due to its opportunities and advantages in the development of white-light-emitting diodes. Therefore, its photoluminescence (PL) mechanism is important. Herein, we study the PL behavior of columniform TPP2MnBr4 crystals using multi-spectroscopy. The temperature-dependent PL data show that the PL of the TPP2MnBr4 crystal originates from the recombination of a self-trapping exciton. A polarization-dependent PL test suggests that the self-trapping exciton is anisotropic, which indicates that the distribution of self-trapping states is sensitive to the orientation of the crystal axis. Space-resolved PL spectroscopy shows that the anisotropy of PL gradually weakens along the orientation of the columniform crystal, which has a longer relaxation distance than traditional light-wave-guiding behavior. Thus, anisotropy of PL can exist before it disappears in the crystal. Our results elucidate the PL mechanism of low-dimensional networked organic-inorganic hybrid metal halide crystals and provide a foundation for advanced optical polarization devices based on them.

One-Dimensional Organic-Inorganic Lead Bromide Hybrids with Excitation-Dependent White-Light Emission Templated by Pyridinium Derivatives.

Organic-inorganic hybrid metal halides have attracted widespread attention due to their excellent tunability and versatility. Here, we have selected pyridinium derivatives with different substituent groups or substitution positions as the organic templating cations and obtained six 1D chain-like structures. They are divided into three types: type I (single chain), type II (double chain), and type III (triple chain), with tunable optical band gaps and emission properties. Among them, only (2,4-LD)PbBr3 (2,4-LD = 2,4-lutidine) shows an exciton-dependent emission phenomenon, ranging from strong yellow-white to weak red-white light. By comparing its photoluminescence spectrum with that of its bromate (2,4-LD)Br, it is found that the strong yellow-white emission at 534 nm mainly came from the organic component. Furthermore, through a comparison of the fluorescence spectra and lifetimes of (2,4-LD)PbBr3 and (2-MP)PbBr3 (2-MP = 2-methylpyridine) with similar structures at different temperatures, we confirm that the tunable emission of (2,4-LD)PbBr3 comes from different photoluminescent sources corresponding to organic cations and self-trapped excitons. Density functional theory calculations further reveal that (2,4-LD)PbBr3 has a stronger interaction between organic and inorganic components compared to (2-MP)PbBr3. This work highlights the importance of organic templating cations in hybrid metal halides and the new functionalities associated with them.