Hot Springs Research Articles

Collagen composite fibers with various functionalized carbon nanotubes fabricated via microfluidic spinning

AbstractCollagen (Col) composite fibers containing various functionalized multiwalled carbon nanotubes (MWNTs) were prepared via microfluidic spinning, and the influences of MWNT content and type on the performances of the composite fibers were investigated by transmission electron microscope, UV–vis, SEM, Fourier Transform Infrared Spectrometer, differential scanning calorimetry, X‐ray diffraction, and tensile testing. The Col composite fibers showed tightly packed bundle structures on surfaces originated from the high shear rates in the microfluidic channels, and MWNT facilitates the self‐assembly of Col molecules, leading to the ordered arrangement of Col fibrils along the fiber axis. When the loading of carboxylated MWNT (cMWNT) was 0.5 wt%, the tensile strength of Col/cMWNT achieved the maximum of 1.94 cN/dtex owing to the excellent hydrogen bond and electrostatic interactions between the carboxyl groups in cMWNT and amino groups in Col molecules, which is significantly higher than those composite fibers made from unfunctionalized and hydroxylated MWNT. Moreover, with the incorporation of MWNT the thermal stability and water resistance of Col fibers were improved due to the enhanced interfacial interactions between Col and MWNT. The fabrication method in this work enables the controlled formation of Col fibers and demonstrates huge potential for use in Col‐based biomaterials.Highlights Novel collagen (Col)/multiwalled carbon nanotube (MWNT) composite fibers were prepared via microfluidic spinning. The Col composite fibers showed tightly packed bundle surface structures. Col/carboxylated MWNT achieved the maximum tensile strength of 1.94 cN/dtex. MWNT enhanced thermal stability and water resistance of Col fibers.

Development and characteristic research on new thermal insulation and anti-permeability grouting material for tunnels in cold regions

The surrounding rock of tunnels in cold regions are susceptible to the freeze–thaw cycle resulting from the combination of low temperatures and moisture during tunnel service. The phenomenon will not only lead to the expansion of pores and fissures in the surrounding rock of the initial tunnel, but also destroy the integrity of the rock. This destruction will have a serious impact on tunnel structure and rail transit operation safety. At present, the commonly used thermal insulation measures have some problems such as maintenance difficulties, low economic efficiency, and safety hazards. Therefore, it is urgent to develop a kind of tunnel maintenance grouting material with insulation and anti-permeability, which has the characteristics of simple operation, easy preparation and application. We independently developed a composite grouting material composed of polyurethane (PU), epoxy resin (E-51) and acrylic powder (PMMA). Through the material combustion test, magnesium hydroxide was selected as the flame retardant additive. Moreover, we measured the thermal conductivity, water absorption, apparent density, porosity and strength characteristic parameters. The thermal insulation and anti-permeability characteristics of the composites were also analyzed. The results indicated that the thermal conductivity of the new composite grouting material is 6.3% lower than the PU before adding flame retardant. Compared with the PU with flame retardant, the water absorption decreased by 74.4% and the ultimate strength increased by 33.3%. For the area with an average temperature lower than − 10 °C, we recommend the ratio scheme of E-51: 3%; PMMA: 15%. For the area with high water content in the surrounding rock of the tunnel, we recommend the ratio scheme of E-51: 15%; PMMA: 3%. This study provides new ideas for material preparation and tunnel insulation methods for anti-freezing measures in tunnels during their operational period in cold regions.

The Effect of Zn2(BDC)2 Metal Organic Framework on the Miscibility and Properties of Poly(Lactic Acid)/Poly(Butylene Adipate-co-Terephthalate) Biodegradable Blends

In our research described in this paper, the metal-organic framework MOF-2 [Zn2(BDC)2] was used to enhance the properties of a biodegradable blend based on poly(lactic acid) (PLA) and poly(butylene adipate-co-terephthalate) (PBAT). PLA/PBAT/(1, 3, 5, and 7 wt%) MOF-2 blends were prepared using a melt blending technology with a twin-screw extruder. The phase morphology, rheological behavior and barrier properties of the blends were studied. X-ray diffraction (XRD) showed a slight increase in the crystalline content of the PLA/PBAT matrix with increasing MOF-2 content. Scanning electron microscopy (SEM) revealed that the PLA/PBAT blend was immiscible, and the phase morphology improved with MOF-2 by enhancing the interfacial compatibility, reducing the size of micro-domains and cavities, and promoting a transition to a co-continuous morphology, indicating better miscibility. The ternary nanocomposites with 5 and 7 wt% MOF-2 showed increased complex viscosity (η*) and storage modulus (G′) compared to those with 1 and 3% MOF-2, indicating stronger percolated networks. The thermal and barrier properties and water absorption capacity were also improved, confirming the rheological measurements. All the results showed that the PLA/PBAT/MOF-2 nanocomposites could be used in the field of packaging.

A state‐of‐the‐art review on geothermal energy exploration in Morocco: Current status and prospects

AbstractIn the last few decades, addressing the global challenge of implementation of strategies for renewable energy and energy efficiency has become crucial. Morocco, since 2009, has made a steadfast commitment to sustainability, with a particular focus on advancing the development of renewable energy resources. A comprehensive strategy has been formulated, centering on utilizing the country's energy potential to drive progress in this vital sector. Morocco is considered a country with abundant thermal water, indicating deep reservoirs with significant hydrothermal potential. Geothermal zones were selected based on the abundance of hot springs where water temperatures were high and geothermal gradients were significant. The abundance and importance of hot springs, combined with recent volcanism and ongoing non‐tectonic activity linked to alpine orogeny, strongly suggest that these regions are promising reservoirs for geothermal energy. This great potential also extends to neighboring countries. In northeast and south Morocco, the temperature of thermal water ranges from 26 to 54°C. This study serves as an inclusive review of the geothermal potentialities in Morocco.

From agro-food waste to nanoparticles: green synthesis of copper nanoparticles with lignin peroxidase enzyme produced by Anoxybacillus rupiensis using peanut shells.

This study presents a novel approach for the eco-friendly green synthesis of copper nanoparticles (Cu NPs) using enzymatic mediation which is an environmentally benign alternative to conventional methods, offering control over particle size and shape. Anoxybacillus rupiensis BS1 thermophilic bacterium was isolated from Erzurum's Pasinler hot spring and lignin peroxidase enzyme production conditions (incubation time 96h, 40g/L shell amount, pH 8.5, 150rpm, and 60°C temperature) were used in the production of peroxidase enzyme using peanut waste which has been optimized. The characterization of the synthesized Cu NPs was performed using various analytical techniques, including UV-vis spectroscopy, Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and scanning electron microscopy (SEM), confirming the successful production of stable and well-defined nanoparticles. Furthermore, the biological activities of the synthesized Cu NPs were explored, revealing their potential for antimicrobial applications. The antibacterial efficacy of the Cu NPs against some pathogens such as Escherichia coli, Klebsiella pneumoniae, Staphylococcus aureus, Streptococcus pyogenes, and Bacillus cereus was examined. It was determined that Cu NPs were effective on all pathogens and had the highest effectiveness against the S. pyogenes pathogen (19.0mm). This study not only presents an innovative and sustainable approach for the synthesis of Cu NPs but also highlights the multifaceted biological activities of these nanoparticles, opening avenues for diverse applications in the fields of medicine, agriculture, and environmental remediation. The utilization of peanut shell wastes as a substrate for enzyme production adds value to agricultural by-products, contributing to the development of a circular and sustainable economy.

Complete genome sequences of Thermus thermophilus strains isolated from Shirahama Hot Spring in Japan.

We isolated six Thermus thermophilus strains from Shirahama Hot Spring in Japan. Complete genome sequences, determined by combining Oxford Nanopore long-read and Illumina short-read sequence data, revealed that they showed >99.9% average nucleotide identities with each other and approximately 97% to the genome of the type strain HB8T.

Taking the temperature of time: The influence of temperature on people's metaphorical perspectives on time through emotion

AbstractSpace provides the conceptual scaffolding for the understanding of time. Customarily, the movement of events in time is metaphorically conceptualized from two spatial perspectives: the ego‐moving perspective that envisions an observer moving towards a stationary future and the time‐moving perspective that envisages the future moving towards a stationary observer. Extensive work has shown that emotions of opposite valence can yield contrary temporal perspective preferences. Relatedly, much evidence suggests that physical warmth and coldness prompt antithetical emotional evaluations. Threading together these two strands of insights, the current research explored whether ambient temperatures would influence people's metaphorical perspectives on time through a common link to emotion. Study 1 suggested that when deciphering two temporally ambiguous statements, people in warmer spring preferred the ego‐moving perspective, whilst those in colder winter favoured the time‐moving perspective. To determine a causal effect and test the hypothesized underlying mechanism of emotion, Study 2 examined the priming effect of temperature on temporal perspective preferences and emotional states. The results showed that differential temperatures induced opposite emotional responses, which in turn prompted diametric perspectives on time. These findings were replicated in Study 3 using an alternative measure of perspectives on time. Study 4 further validated the mediating role of emotion in the temperature–time relationship. Taken together, the current findings evince a unidirectional relationship between the incidental environmental factor of temperature and the metaphorical representation of time and accentuate the roles of sensory perception and emotional experience in temporal cognition.

Characterization, whole-genome sequence analysis, and protease production of a new thermophilic Bacillus licheniformis strain isolated from Debagh hot spring, Algeria.

A new thermophilic strain, designated as Bacillus sp. LMB3902, was isolated from Hammam Debagh, the hottest spring in Algeria (up to 98°C). This isolate showed high protease production in skim milk media at 55°C and exhibited significant specific protease activity by using azocasein as a substrate (157.50 U/mg). Through conventional methods, chemotaxonomic characteristics, 16S rRNA gene sequencing, and comparative genomic analysis with the closely related strain Bacillus licheniformis DSM 13 (ATCC 14580T), the isolate Bacillus sp. LMB3902 was identified as a potentially new strain of Bacillus licheniformis. In addition, the gene functions of Bacillus sp. LMB3902 strain were predicted using the Gene Ontology, Kyoto Encyclopedia of Genes and Genomes, Clusters of Orthologous Groups, Non-Redundant Protein Sequence Database, Swiss-Prot, and Pfam databases. The results showed that the genome size of Bacillus sp. LMB3902 was 4.279.557bp, with an average GC content of 46%. The genome contained 4.760 predicted genes, including 8 rRNAs, 78 tRNAs, and 24 sRNAs. A total of 235 protease genes were annotated including 50 proteases with transmembrane helix structures and eight secreted proteases with signal peptides. Additionally, the majority of secondary metabolites found by antiSMASH platform showed low similarity to identified natural products, such as fengicin (53%), lichenysin (57%), and surfactin (34%), suggesting that this strain may encode for novel uncharacterized natural products which can be useful for biotechnological applications. This study is the first report that describes the complete genome sequence, taxono-genomics, and gene annotation as well as protease production of the Bacillus genus in this hydrothermal vent.

Study on fresh and hardened state properties of eco-friendly foamed concrete incorporating waste soda-lime glass

Improper waste management is causing global environmental problems. Waste glass may have adverse impacts on the ecosystem. While a substantial amount of soda-lime glass bottle (SGB) undergoes recycling to create new glass items, a significant volume still ends up in landfills. Therefore, the aim of this study was to explore the potential use of SGB in foamed concrete (FC) production as an aggregate replacement. SGB was substituted for sand in different weight fractions, ranging from 5 to 50%. The fresh state, mechanical, thermal, pore structure, and transport properties were examined. The findings showed a significant enhancement in the FC’s mechanical properties when SGB replaced 20% of sand. The compressive, flexural, and splitting tensile strengths exhibited a rise of up to 17.7, 39.4, and 43.8%, respectively. The findings also demonstrated that the addition of SGB improved the thermal conductivity, sorptivity, water absorption, and porosity. The scanning electron microscopy analysis indicated that the inclusion of 20% SGB caused a substantial decrease in void diameter and enhanced its uniformity. A comparison was made between the experimental data and predictions of the mechanical properties using various models of international standards, such as IS 456, ACI 318, NZS-3101, EC-02, AS 3600, and CEB-FIB, along with several references in the literature. The findings implied a strong correlation between the strength properties. The outcomes of this research offer valuable insights into both the possible advantages and constraints of using SGB in FC. Furthermore, this extensive laboratory investigation may serve as a guideline for future study and aid in the advancement of greener and more environmentally friendly FC alternatives.

Latent magmatism beneath the Korean Peninsula caused by asthenosphere upwelling

Volatiles such as helium and carbon dioxide provide insights into geological processes spanning from the Earth’s deep interior to its surface. Integration with geophysical data providing enhanced vertical resolution with a wider horizontal range better elucidates the mantle dynamics and its interactions with the crust. Here we present geochemistry of volatiles dissolved in fluid samples from fault-related springs, thermal spa waters, and groundwaters across the Korean Peninsula. These were examined in conjunction with existing geophysical information. Remarkably, there is a strong spatial correlation between helium isotopes and S-wave velocity, suggesting the influence of mantle upwelling on both geochemical and geophysical parameters. Furthermore, the computed helium flux is comparable to that of volcanic regions, implying partial melting induced by mantle upwelling due to edge-driven convection beneath the Korean Peninsula. Therefore, these findings suggest that mantle-derived volatiles can be released diffusely over large areas through faults in the modern Earth’s intraplate environment.

Radon and water geochemistry at the active Campi Flegrei volcano (Italy): The role of pore-water phenomena

This study provides new 222Rn measurements performed by RAD7 on 31 thermal waters from the Campi Flegrei caldera, the active volcanic-geothermal field close to Naples (Southern Italy). Waters sampled between 2021 and 2023 are characterized for physical parameters, major ions geochemistry and radium content. Rn contents from Somma-Vesuvius, Ischia and Vulcano volcanoes, together with the river plain north to the Campi Flegrei, were obtained for comparison. The Campi Flegrei caldera reaches the highest Rn concentrations respect to the other sites, varying from 0.03 ± 0.02 to ca. 1887 ± 13 Bq/L, although mostly are below 60 Bq/L. We detect a steady-state condition of constant temperature, facies and radon activity that characterizes most sites, with only minor impacts from seasonalilty and Weigel's effects. Just a small fraction of 222Rn derives from its 226Ra parent in solution, while radon activity in local waters is mainly due to emanation from the radium-containing rock reservoir. Our dataset proofs that radon couples with temperature, sulfate and CO2 in relations to rock-leaching and pore-water phenomena that proceed in the reservoir as it warms up and degasses. Rn and CO2 are decoupled in deeply and timely equilibrated geothermal fluids.Two main end-members, i.e., a low radioactive cold diluted and the Rn-richest hypersaline water from the deep geothermal reservoir are recognized; seawater contamination and heating over 70 °C play a major role in radon decrease.Related radium contents, physical parameters and major ions geochemistry are also presented for a comparison with published data.

Environmental analogs from yellowstone hot springs on geochemical and microbial diversity with implications for the search for life on Mars

From Viking landers to Perseverance rover, Mars has been explored by several in situ missions capable of analyzing organic compounds. Results from the SAM and SHERLOC on Curiosity and Perseverance, respectively, support the detection of lean organic matter (at ppb-ppm levels) in the top surface samples, although the source(s) and preservation mechanisms are still ambiguous. Perseverance is currently exploring a fluvio-lacustrine system at Jezero crater and may explore an ancient volcanic terrain after exiting the crater. As Perseverance would collect samples for potential return to Earth, preparation is needed for sample return efforts through various means including i) the detection of trace organic compounds in various matrices, ii) validation of compounds identified by Martian rovers, and iii) better understanding of mechanisms of their production on Mars. On these returned samples, the community may be able to resolve the timing of organic matter formation and refine hypotheses regarding organic preservation in Martian soils despite the presence of numerous oxidants, salts, and pH-temperature intra and inter-site variations that are less conductive to long-term preservation of organic matter. For instance, acidic conditions promote clay catalyzed isomerization, but seem to benefit for the fatty acid preservation producing organic-salts or favoring salt dissolution in the matrix to protect organic compounds from radiations and water alteration. With a similar aim, we selected samples from Yellowstone National Park hot springs and silica sinters as analogs to locations visited by Curiosity and Perseverance or – in the future – Rosalind Franklin rover. The hot springs in this study developed over hundreds to thousands of years, providing optimal conditions (i.e., matrix composition, temperature, pH) of preservation for organic molecules, extremophilic and mesophilic cells. In our study, the most well preserved organic matter and biosignatures were detected in acidic silica sinters with a surface (water) temperature below 50 °C and a minor crystalline phase. The gas chromatography – mass spectrometry molecular analysis revealed a variety of organic compounds we classified as bioindicators (such as amino acids, nucleobases, and sugars), and biosignatures (such as long-chain branched and/or (poly)unsaturated lipids, secondary metabolites involved in the quorum sensing or communication between individuals). We validated with a SAM/MOMA-like benchtop extracting oven the organic matter extraction protocols performed with the SAM experiment. We identified using the different SAM and MOMA extraction protocols (pyrolysis and wet-chemistry derivatizations) eight microbial classes through a unique untargeted environmental metabolomics’ method embracing space flight technology constraints. Additionally, we identified one (and likely two) agnostic biosignature(s): i) the concomitance of some elements and organic compounds in the analogs (correlation of organic matter elements: C, N, S, P and organic molecules co-located with essential biological elements: Fe, Mg, V, Mn and non-essential biological elements concentrated by microorganisms: As, Cs, Ga), and ii) the negative isotope C and N ratio demonstrating organic molecules rich in 12C and 14N: archaeal, bacterial, and eukaryotic lipids for an efficient low energy-consuming metabolism.

Expert-driven geothermal play fairway analysis for low to medium temperature hidden systems in northwestern Luzon Island, Philippines

The Philippines is the third largest geothermal power-producing country in the world. However, additional opportunities exist to expand the geothermal portfolio of the country with the exploitation of low- and moderate- temperature resources, as well as assessment and development of hidden geothermal systems (i.e., those with no active surface manifestations). As part of the Geothermal Development Initiative (GEODE) funded through the U.S. Department of State award to the University of Nevada, Reno, a collaboration between the Philippines Renewable Energy Management Bureau (REMB) of the Department of Energy and the University of Nevada in Reno, Great Basin Center for Geothermal Energy occurred from September 2022 to March 2024. As part of this collaboration, an expert-driven geothermal Play Fairway Analysis (PFA) was conducted in the northwestern portion of Luzon Island of the Philippines utilizing existing data sets available to the REMB. The goal of this PFA is to identify areas with greater relative geothermal favorability, determine where the data gaps are, and assist in the discovery of hidden geothermal systems. A geothermal PFA requires the compilation and transformation of datasets into appropriate formats (e.g., tables, shapefiles, and raster files) and evaluation of each dataset to determine how it can be used as a proxy for the key attributes of a geothermal system (e.g., heat and permeability). Once the data are organized, they are weighted for integration into the GIS software to develop a favorability model for heat and permeability. The attribute models are then combined to produce two PFA models: the conventional hydrothermal low- to moderate- temperature geothermal favorability and the hidden systems favorability. The data difference between the conventional geothermal favorability and hidden systems models is that hot springs are not used for the hidden systems model. The conventional favorability model of northwestern Luzon Island indicates areas of higher geothermal favorability in the central and southern sections of the study area. Many of the favorable areas identified in the conventional model already have active leases for geothermal exploration, lending more confidence to the methodology and model, and suggesting that the areas with no current leases and high geothermal favorability could represent future exploration targets. The hidden systems model shows favorable zones in the north, central and southern sectors, and can serve as a tool to decide the areas for exploration of potential hidden geothermal systems, particularly, in the Ilocos Norte, Apayao, and Nueva Viscaya regions.

Solar thermal hot water system in hospitals: Robust design methodology considering uncertainties

The energy yield of solar thermal installations is influenced by local climatic conditions, heating demand, and the efficiency of the system. These factors are affected by uncertainties arising from natural variations and a lack of knowledge. Designers typically address these uncertainties by oversizing the collector area. However, this practice usually leads to high costs, low efficiency, and short service lifetimes of the system. This paper proposes a robust sizing methodology for the solar thermal system used for service hot water preparation in a case-study hospital with a daily average hot water consumption of 8.69 m3. This novel approach incorporates uncertainties through probabilistic simulations, assessing the system’s reliability in achieving a 70% solar fraction design goal. The simulations reveal a mere 22% confidence in the initial deterministic design concerning the solar target and emphasize the importance of thermal insulation, temperature control, and collector cleaning as key factors to reduce performance variability. Although the final revised design outcome requires a 15% increase in the collector area compared to the initial scenario and stricter specifications for control components, pipe insulation, and valve maintenance, it achieves a 90% reliability. In addition, annual carbon emissions and levelized costs of hot water production can be reduced by 18% and 13%, respectively.

PGPR isolated from hot spring imparts resilience to drought stress in wheat (Triticum aestivum L.)

Drought is a major abiotic stress that occurs frequently due to climate change, severely hampers agricultural production, and threatens food security. In this study, the effect of drought-tolerant PGPRs, i.e., PGPR-FS2 and PGPR-VHH4, was assessed on wheat by withholding water. The results indicate that drought-stressed wheat seedlings treated with PGPRs-FS2 and PGPR-VHH4 had a significantly higher shoot and root length, number of roots, higher chlorophyll, and antioxidant enzymatic activities of guaiacol peroxidase (GPX) compared to without PGPR treatment. The expression study of wheat genes related to tryptophan auxin-responsive (TaTAR), drought-responsive (TaWRKY10, TaWRKY51, TaDREB3, and TaDREB4) and auxin-regulated gene organ size (TaARGOS-A, TaARGOS-B, and TaARGOS-D) exhibited significantly higher expression in the PGPR-FS2 and PGPR-VHH4 treated wheat under drought as compared to without PGPR treatment. The results of this study illustrate that PGPR-FS2 and PGPR-VHH4 mitigate the drought stress in wheat and pave the way for imparting drought in wheat under water deficit conditions. Among the two PGPRs, PGPR-VHH4 more efficiently altered the root architecture to withstand drought stress.

The dominant warming season shifted from winter to spring in the arid region of Northwest China

The arid region of Northwest China (ARNC) has experienced a significantly higher warming rate than the global average and exhibits pronounced seasonal asymmetry, which has important implications for the region’s water-dependent systems. To understand the spatiotemporal patterns and driving mechanisms of seasonal asymmetric warming in the ARNC, we investigated seasonal changes in temperature rise and their underlying causes based on station and reanalysis data. We found that the dominant season of temperature increase shifted from winter to spring. The contribution of spring warming to the total temperature increase rose from −5%–7% to 58%–59%, while the contribution of winter warming decreased from 60%–75% to −4%–9%. However, the mechanisms underlying spring warming and winter cooling differ. An increase in solar radiation caused by a decrease in cloud cover (R = −0.64) was the main reason for spring warming, while a strengthening Siberian High primarily drove winter cooling.

A rational construction of FexOy-N-ZSM-5 catalyst with graphene structures and FeNx sites for the selective catalytic oxidation of triethylamine

Stabilizing metal species at the atomic level and tuning their catalytic properties is a significant challenge. Herein, an N-doped FexOy-N-ZSM-5 catalyst with layered and chain-like graphene structures is reported. The catalyst can selectively catalyze the oxidation of triethylamine (TEA) with an efficiency of 99.7 % at 240 °C, and maintain an N2 yield of 97.6 % over the reaction temperature range of 240–360 °C. The results indicate that the layered graphene in the catalyst provide anchor sites for active Fe, while the abundant chain-like graphene act as connectors between ZSM-5 and the layered graphene, offering ample opportunities for TEA and its intermediates to contact the catalyst surface. This increases the number of active sites on the catalyst, thereby enhancing the catalytic performance of FexOy-N-ZSM-5. Notably, due to the interaction between FeOx and FeNx species, FexOy-N-ZSM-5 exhibits excellent thermal stability and water resistance, demonstrating promising potential for practical.

Pemodelan Bawah Permukaan Berdasarkan Nilai Kecepatan Gelombang Kompresi (vp) di Kawasan Rembesan Hidrokarbon Sangubanyu, Jawa Tengah

Sangubanyu is located in Central Java, Indonesia, besides having some hot springs it also has crude oil seepages that have been known since 1971, to understand the cause of these seepages subsurface structure analysis is needed by recording microtremor data at 63 points. The HVSR Method is used to process micrometer data to find subsurface conditions by wave velocity, Compressional wave velocity (vp) is part of this method. vp data could be used to interpret the layer types of subsurface conditions. The southern of the study area has about 112 to 1182 m/s of vp, and the northern has about 506 to 2944 m/s, the differential of these values could be interpreted as a fault with the southern relatively moving down from the northern, there is a little distance between this fault and the crude oil seepages, it is possible that the fracture that occurs by faults was creating secondary porosity in volcanic rock and becomes a migration route for the crude oil flows to the surface.

Thermophilic Hadarchaeota grow on long-chain alkanes in syntrophy with methanogens

Methanogenic hydrocarbon degradation can be carried out by archaea that couple alkane oxidation directly to methanogenesis, or by syntrophic associations of bacteria with methanogenic archaea. However, metagenomic analyses of methanogenic environments have revealed other archaea with potential for alkane degradation but apparent inability to form methane, suggesting the existence of other modes of syntrophic hydrocarbon degradation. Here, we provide experimental evidence supporting the existence of a third mode of methanogenic degradation of hydrocarbons, mediated by syntrophic cooperation between archaeal partners. We collected sediment samples from a hot spring sediment in Tengchong, China, and enriched Hadarchaeota under methanogenic conditions at 60 °C, using hexadecane as substrate. We named the enriched archaeon Candidatus Melinoarchaeum fermentans DL9YTT1. We used 13C-substrate incubations, metagenomic, metatranscriptomic and metabolomic analyses to show that Ca. Melinoarchaeum uses alkyl-coenzyme M reductases (ACRs) to activate hexadecane via alkyl-CoM formation. Ca. Melinoarchaeum likely degrades alkanes to carbon dioxide, hydrogen and acetate, which can be used as substrates by hydrogenotrophic and acetoclastic methanogens such as Methanothermobacter and Methanothrix.

Sustainable wastewater recovery system employing geothermal energy – Performance and feasibility study

In this study, a sustainable wastewater recovery system employing geothermal energy has been proposed. The efficiency of the suggested sustainable system has been simulated using heat transfer. Then, component-wise validation has been carried out with the existing data available in the literature wherever applicable and estimated an error of ± 8 %. The proposed sustainable system’s parametric and performance analyses have employed the developed vapor. From the parametric study, it is observed that hot spring temperatures have a significant influence on sustainable systems. Further, through performance investigation, it is understood that low dam/river/sea water temperatures and enhancing the water condenser effectiveness and flow rate ratio simultaneously improve the system performance. For different climatic regions of India, explored the feasible geothermal hotspots near dams/rivers/seawater and analyzed that among the hot and dry, hot and humid, composite and cold regions, the proposed sustainable system is best suitable at a composite region with a maximum possible water extraction/freshwater generation rate of 0.78 L/h for the given specifications and operating range. Moreover, it is assessed that hot spring temperature is the deciding factor for sustainable system performance in different climatic regions. Further, the current study can be used as a reference for understanding the phenomenon of potential geothermal hotspots for wastewater recovery in various climatic areas