Heavy Metals Research Articles

Enhanced remediation of PFAS-metal co-contaminated soil by ceramsite supported Fe3O4–MoS2 heterojunction as a high-performance piezocatalyst

In this study, a novel piezoremediation system was developed to remediate an actual soil co-polluted by high contents of per- and polyfluoroalkyl substances (PFAS, 5725 μg/kg soil) and heavy metals (6455 mg/kg soil). Two piezocatalysts, MoS2/ceramsite (MC) and Fe3O4–MoS2/ceramsite (FMC), were synthesized using a facile hydrothermal-coprecipitation method. These two materials were employed to treat the co-contaminated soil in soil slurry environment under sonication. FMC exhibited significantly higher piezoremediation performance than MC, wherein 91.6% of PFAS, 97.8% of Cr6+ ions and 81% of total metals (Cr, Cu, Zn and Ni) were removed from the soil after 50 min of the FMC piezoremediation process. FMC also exhibited the advantages of easy separation from the slurry phase and excellent reusability. In comparison with MC, the Fe3O4–MoS2 heterojunction in FMC can stabilize MoS2 particles on the surface of ceramsite granules, promote the separation of electron/hole pairs, accelerate charge transfer, therefore enhancing piezocatalytic performance. The electron spin resonance analysis and free radical quenching tests show that •OH was the dominant oxidative radical responsible for PFAS degradation. The count of bacteria and the bacterial community structure in the treated soil can be basically restored to the initial states after 30 days of incubation under nutrient stimulation. Overall, this study not only provides a deep insight on soil remediation process, but also offers an efficient and reliable technique for simultaneous decontamination of organic and metal pollutants in soil.

Accumulation of heavy metals from single and combined olive mill wastewater and pomace in soil and bioaccumulation in tissues of two earthworm species: Endogeic (Aporrectodea trapezoides) and Epigeic (Eisenia fetida).

Soil and earthworms are threatened by anthropogenic contamination resulting from olive mill waste dumping on the soil due to their pollutant properties. While several studies have explored the effects of olive mill waste on soil properties and the accumulation of heavy metals in soil, there is currently a gap in the literature regarding the potential bioaccumulation of heavy metals from olive mill waste in earthworms. In this study, soil with earthworms from two ecological categories (endogeic: Aporrectodea trapezoides and epigeic: Eisenia fetida) was treated with increasing doses of olive mill wastewater (OMWW) and olive mill pomace (OMP), applied individually or combined, in an indoor experiment in plastic containers, under laboratory conditions. The results revealed the presence of significant concentrations of heavy metals in the two types of wastes ranging as follows: Fe˃ Zn˃ Cu˃ Cd˃ Cr for OMWW, and Fe˃ Zn˃ Cu˃ Cr for OMP (with Cd below the detection limit). The study demonstrated distinct effects of OMWW and OMP, both individually and in combination, on soil heavy metal content, ranging as follows: soil OMWW > soil Combination > soil OMP for Cd; soil Combination > soil OMWW > soil OMP for Cr and Fe; and soil Combination > soil OMP > soil OMWW for Cu and Zn. Additionally, our investigation showed that both earthworm species exhibited significant uptake of these metals into their tissues, particularly the endogeic species. Interestingly, the most significant difference between species was in the accumulation of Cu, with the epigeic species accumulating significantly lower amounts.

Green Technology Approach Towards the Removal of Heavy Metals, Dyes, and Phenols from Water Using Agro-based Adsorbents: A Review.

The swift pace of socioeconomic development and climatic change have put significant strain on the quality of water resources. While, the bulk availability of agro-based materials arising from nature and agricultural practices has paved the way for researchersin eradicating toxic industrial pollutants such as dyes, heavy-metals, phenolic-compounds, pesticides, etc. by using them as adsorbents. In the area of pollution remediation, inventive technologies have been developing. The adsorption technique stands out among the other wastewater-treatment methods as it is simple, easy, efficient, and cost-effective. The agro-based adsorbents their use in this area contributes to minimizing natural waste. They can be employed in their original raw-form or after undergoing simple processes such as drying, grinding, and carbonization. Moreover, these adsorbents are typically modified physically or chemically to change their surface properties and improve their adsorption efficiency. The low-cost agro adsorbents have shown efficient adsorption capacities towards removing various organic and hazardous water pollutants. With a few exceptions, majority of adsorbents have demonstrated heavy metals, dyes and phenol removal efficiencies exceeding 90%. This review summarizes the available information and strategies for using agro-based adsorbents to eliminate hazardous water pollutants. It is a prospective area for research in the field of environmental pollution.

Based on BODIPY fluorescent probe for detecting NO in tumour cells, zebrafish and rice roots under abiotic stresses

As a ubiquitous signaling molecule in organisms and plants, NO plays an important role in their physiological and pathological processes. To date, numerous fluorescent probes have been successfully developed for the detection of NO. However, there are still limitations in the ability to simultaneously detect fluctuations of NO in vivo and plants. In this study, we have developed a fluorescent probe (BZD) specifically probe that reacts with NO under aerobic conditions, leading to a disruption of the photoinduced electron transfer (PeT) process from the secondary amine to the core of BODIPY. This disruption results in the emission of a distinct fluorescent signal. The tests showed that BZD had the advantages of low detection limit (28.4 nM), fast detection time (60 s), and successfully demonstrated good imaging ability in cell, zebrafish. Moreover, the probe was used to detect the changes in NO content in rice roots under abiotic stresses, such as heavy metals and salt stress for the first time. Thus, BZD has significant potential to analyze and detect NO in animal cells and insights into the role of NO in plant signaling.

One stone two birds: Endophytes alleviating trace elements accumulation and suppressing soilborne pathogen by stimulating plant growth, photosynthetic potential and defense related gene expression

In the present investigation, we utilized zinc nanoparticles (Zn-NPs) and bacterial endophytes to address the dual challenge of heavy metal (HM) toxicity in soil and Rhizoctonia solani causing root rot disease of tomato. The biocontrol potential of Bacillus subtilis and Bacillus amyloliquefaciens was harnessed, resulting in profound inhibition of R. solani mycelial growth and efficient detoxification of HM through strong production of various hydrolytic enzymes and metabolites. Surprisingly, Zn-NPs exhibited notable efficacy in suppressing mycelial growth and enhancing the seed germination (%) while Gas chromatography-mass spectrometry (GC-MS) analysis unveiled key volatile compounds (VOCs) crucial for the inhibition of pathogen. Greenhouse trials underscored significant reduction in the disease severity (%) and augmented biomass in biocontrol-mediated plants by improving photosynthesis-related attributes. Interestingly, Zn-NPs and biocontrol treatments enhanced the antioxidant enzymes and mitigate oxidative stress indicator by increasing H2O2 concentration. Field experiments corroborated these findings, with biocontrol-treated plants, particularly those receiving consortia-mediated treatments, displayed significant reduction in disease severity (%) and enhanced the fruit yield under field conditions. Root analysis confirmed the effective detoxification of HM, highlighting the eco-friendly potential of these endophytes and Zn-NPs as fungicide alternative for sustainable production that foster soil structure, biodiversity and promote plant health.

Ionic liquid coupled plasma promotes acetic acid production during anaerobic fermentation of waste activated sludge: Breaking the restrictions of low bioavailable substrates and altering the metabolic activities of anaerobes

This study explored the potential application of plasma coupling ionic liquid on disintegration of waste activated sludge and enhanced production of short-chain fatty acids (SCFAs) in anaerobic fermentation. Under optimal conditions (dosage of ionic liquid [Emim]OTf = 0.1 g/g VSS (volatile suspended solids) and discharge power of dielectric barrier discharge plasma (DBD) = 75.2 W), the [Emim]OTf/DBD pretreatment increased SCFA production by 302 % and acetic acid ratio by 53 % compared to the control. Mechanistic investigations revealed that the [Emim]OTf/DBD combination motivated the generation of various reactive species (such as H2O2, O3, •OH, 1O2, ONOO−, and •O2−) and enhanced the utilization of physical energies (such as heat). The coupling effects of [Emim]OTf/DBD synergistically improved the disintegration of sludge and biodegradability of dissolved organic matter, promoting the sludge anaerobic fermentation process. Moreover, the [Emim]OTf/DBD pretreatment enriched hydrolysis and SCFAs-forming bacteria while inhibiting SCFAs-consuming bacteria. The net effect was pronounced expression of genes encoding key enzymes (such as alpha-glucosidase, endoglucanase, beta-glucosidase, l-lactate/D-lactate dehydrogenase, and butyrate kinase) involved in the SCFA-producing pathway, enhancing the production of SCFAs from sludge anaerobic fermentation. In addition, [Emim]OTf/DBD pretreatment facilitated sludge dewatering and heavy metal removal. Therefore, [Emim]OTf/DBD pretreatment is a promising approach to advancing sludge reduction, recyclability, and valuable resource recovery.

Assessment of Levels and Possible Health Implications of Heavy Metals in Vegetables from Selected Irrigable Wetlands in Lagos and Ogun States, Nigeria

Assessment of Levels and Possible Health Implications of Heavy Metals in Vegetables from Selected Irrigable Wetlands in Lagos and Ogun States, Nigeria

Groundwater quality assessment using machine learning models: a comprehensive study on the industrial corridor of a semi-arid region.

Water plays a significant role in sustaining the lives of humans and other living organisms. Groundwater quality analysis has become inevitable, because of increased contamination of water resources and global warming. This study used machine learning (ML) models to predict the water quality index (WQI) and water quality classification (WQC). Forty groundwater samples were collected near the Ranipet industrial corridor, and the hydrogeochemistry and heavy metal contamination were analyzed. WQC prediction employed random forest (RF), gradient boosting (GB), decision tree (DT), and K-nearest neighbor (KNN) models, and WQI prediction used extreme gradient boosting (XGBoost), support vector regressor (SVR), RF, and multi-layer perceptron (MLP) models. The grid search method is used to evaluate the ML model by F1 score, accuracy, recall, precision, and Matthews correlation coefficient (MCC) for WQC and the coefficient of determination (R2), mean absolute error (MAE), mean square error (MSE), and median absolute percentage error (MAPE) for WQI. The WQI results indicate that the groundwater quality of the study area is very poor and unsuitable for drinking or irrigation purposes. The performance metrics of the RF model excelled in predicting both WQC (accuracy = 97%) and WQI (R2 = 91.0%), outperforming other models and emphasizing ML's superiority in groundwater quality assessment. The findings suggest that ML models perform well and yield better accuracy than conventional techniques used in groundwater quality assessment studies.

Evaluating the Potential of Modified Mango Leaves as a Biosorbent for the Removal of Mercury (II) Ion and Congo Red from Wastewater

The discharge of harmful metallic elements from industrial byproducts has resulted in notable environmental and public health risks. The aim of this study was to investigate the effectiveness of mango leaves as a cost-effective adsorbent in eliminating Hg (II) ions from industrial effluents. Experimental procedures were carried out under controlled conditions at ambient temperature to evaluate the influence of pH, contact duration, initial metal levels, adsorbent quantity, and temperature on the adsorption mechanism. The most favorable pH for optimal Hg (II) ions adsorption was identified at pH 7. The adsorption process displayed swift kinetics in the initial 30 minutes of contact, leading to a removal rate exceeding 90%, with equilibrium achieved after 70 minutes of stirring. Analysis of kinetics revealed a significant correlation coefficient for a pseudo-second-order kinetic equation. The absorption of Hg (II) ions escalated with increased stirring intensity and decreased adsorbent amount. The interaction between Hg (II) ions, Congo red, and mango leaves was analyzed employing Langmuir, Freundlich, and BET isotherm models. The equilibrium data was best fitted by the Langmuir model, presenting a correlation coefficient of 0.98 and a maximum adsorption capacity of 28.40 mg/g. These results underscore the potential of mango leaves as an affordable bio adsorbent for addressing heavy metal pollution in wastewater.

Artificial Intelligence-Based Microfluidic Platform for Detecting Contaminants in Water: A Review.

Water pollution greatly impacts humans and ecosystems, so a series of policies have been enacted to control it. The first step in performing pollution control is to detect contaminants in the water. Various methods have been proposed for water quality testing, such as spectroscopy, chromatography, and electrochemical techniques. However, traditional testing methods require the utilization of laboratory equipment, which is large and not suitable for real-time testing in the field. Microfluidic devices can overcome the limitations of traditional testing instruments and have become an efficient and convenient tool for water quality analysis. At the same time, artificial intelligence is an ideal means of recognizing, classifying, and predicting data obtained from microfluidic systems. Microfluidic devices based on artificial intelligence and machine learning are being developed with great significance for the next generation of water quality monitoring systems. This review begins with a brief introduction to the algorithms involved in artificial intelligence and the materials used in the fabrication and detection techniques of microfluidic platforms. Then, the latest research development of combining the two for pollutant detection in water bodies, including heavy metals, pesticides, micro- and nanoplastics, and microalgae, is mainly introduced. Finally, the challenges encountered and the future directions of detection methods based on industrial intelligence and microfluidic chips are discussed.

Antibiotic Indexing and Heavy Metal Reduction Potential of Four Multi-metal Tolerant Bacterial Strains in Real-Time Sanitary Landfill Leachate Matrix.

Sanitary leachate from urban landfills is known to be contaminated with multi-metals and residual antibiotics. Current research edges on exploring the multi-metal and antibiotic sensitivity profile of four indigenous strains, "Brevibacillus spp. Leclercia spp. Pseudescherichia spp., and Brucella spp." isolated from the leachate of a sanitary landfill in a tropical region. Indigenous isolates were observed to be antibiotic-resistant and have high tolerance against eight of the ten tested metals except Cu & Co. It was observed that interaction with multi-metals in laboratory conditions significantly altered the cell morphology of bacterial strains, as depicted by Scanning Electron Microscope. Metal adsorption onto the microbial surface was deciphered through Electron Dispersive Spectrometer analysis and elemental mapping. Application of isolated strains into real-time leachate matrix exhibits a complete reduction of Ag and Zn and for other tested metals. Their response to these toxicants may facilitate their application in bioremediation-based treatment technologies for urban landfill leachate.

Silent Destruction: Fulminant Hepatitis and the Hidden Danger of Weight Loss Drugs

The use of natural products for therapeutic purposes is a common practice throughout the world, in part, due to the global obesity epidemic and the search for products with appetite suppression and weight loss properties, which include nutritional supplements, vitamins and minerals to herbal products. It is known that such products may be associated with various adverse health effects. Thus, the objective of this study is to report a series of cases of patients, who presented fulminant liver failure (HFI) requiring liver transplantation (LT), related to the consumption of products used for weight loss. This is a retrospective cohort based on the evaluation of patients listed for LT due to IHF at the Hospital das Clínicas of the Universidade Estadual de Campinas, between 1991 and 2022, with patients who had confirmed consumption of products with the aim of loss being selected. During the studied period, 92 patients were listed for HT due to IHF according to the Kings College criteria, with 5 cases being selected with proven consumption of herbal products for weight loss, and other causes that could explain the IHF were excluded. Four (80%) of the patients were female, with a mean age of 40.5 years, and 40% of the cases died. Unlike traditional pharmaceutical medicines, in most countries, the commercialization of these products is not conditioned on clinical and safety evidence or prior approval by regulatory bodies. Hepatoxicity can be related to several factors, such as the presence of toxins naturally found in plants, the presence of heavy metals, contamination during obtaining or processing and the addition of substances omitted from the labels. The use of weight loss products can evolve with IHF, a fact that deserves attention, due to ease of access and growing demand, and it is important to regulate the trade of these products and raise public awareness about the risks of use without professional supervision and guidance.

Engineering properties as a supplement cementitious material of ground copper reduction slag extracted valuable metal from Cu slag

We have examined whether the copper reduction slag (CRS) generated after recovering valuable metals from copper slag (CS) by reduction process can be used as supplementary cementitious materials (SCMs). According to the test results, the Cu secondary slag with low Fe, Cu, and heavy metal contents had a suitable oxide composition for using as a SCM. CRS showed better grinding efficiency than that of ground blast furnace slag (GGBS). Ground CRS contributed to the formation of tobermorite under autoclaved curing conditions. The compressive strength of CRS mortar replacing 50 % of OPC generated 93 % of that of the OPC mortar. Based on the results of this study, we found that the CRS has highly appropriate engineering characteristics for using as SCMs for concrete. In addition, it is judged that the method of using secondary slag as a material for precast concrete produced under hydrothermal conditions can greatly contribute to the construction process of buildings by securing mechanical performance.

Phyto-extraction Potential of Duranta erecta's Against Heavy Metal Assisting by EDTA and Citric Acid for Mitigating Industrial Polluted Soil

Phyto-extraction Potential of Duranta erecta's Against Heavy Metal Assisting by EDTA and Citric Acid for Mitigating Industrial Polluted Soil

Statistical modeling and optimization of heavy metals (Pb and Cd) adsorption from aqueous solution by synthesis of Fe3O4/SiO2/PAM: isotherm, kinetics, and thermodynamic

Statistical modeling and optimization of heavy metals (Pb and Cd) adsorption from aqueous solution by synthesis of Fe3O4/SiO2/PAM: isotherm, kinetics, and thermodynamic

One-step facile synthesis of the photocatalyst using pyrolyzed terephthalic acid and m-phenylenediamine composite for Cr(VI) reduction in aqueous solutions

Discharging heavy metals into water bodies presents a serious environmental risk. Hexavalent chromium (Cr(VI)) is one of the harmful substances that pose substantial health hazards to humans. The aim of this research is to synthesize an organic composite photocatalyst by polymerizing m-phenylenediamine (mPD) and Terephthalic acid (TA) at high temperatures. TA and mPD interact and result in the formation of a polymerized-mPD-TA photocatalyst to reduce Cr(VI) under visible light. Field Emission Scanning Electron Microscopic (FESEM), Energy-Dispersive X-ray (EDX), Dynamic Light Scattering (DLS), Fourier-transform Infrared spectroscopic (FT-IR), Brunauer-Emmett-Teller (BET), UV–Vis Diffuse Reflectance Spectra (UV–vis-DRS), Electrochemical Impedance Spectroscopy (EIS) and Mott-Schottky methods were used to characterize the produced photocatalyst. The effect of operational parameters including pH, volume of hole scavenger, photocatalyst mass, and Cr(VI) initial concentration was investigated, and the optimum conditions were clarified. To investigate the adsorptive characteristics of the prepared photocatalyst, Isotherm, and Kinetic investigations were carried out. The adsorption studies revealed that the Freundlich and pseudo-second-order (PSO) models offered a better suitable match to the experimental data. In order to investigate the practicality of the photocatalyst, reusability, and sunlight tests were carried out, and it was shown that the prepared composite possessed great durability and could perform under sunlight to reduce Cr(VI).

Effects of ionic strength and bentonite ratio on the migration of Cr(VI) in clayey soil-bentonite engineered barrier.

Soil-bentonite (S-B) barriers have been widely used for heavy metal pollution containment. This study conducted batch adsorption tests and diffusion-through tests to evaluate how ionic strength and bentonite ratio influence the migration of Cr(VI) in natural clay-bentonite mixtures. The test results indicated that the adsorption of Cr(VI) exhibited an obvious anion adsorption effect, the pH of the soil mixture increased with the addition of bentonite, resulting in a decrease in the positive surface charge. This change led to a decrease in Cr(VI) adsorption capacity, from 775.19 mg/kg for pure clay to 378 mg/kg for mixture samples with excessive bentonite. Furthermore, as the ionic strength increases from 0 to 0.1 M, the Cr(VI) adsorption capacity increases slightly due to the weakening of electrostatic repulsion on the clay particle surface, but the effective diffusion coefficient (De) increases by 21.97%. The compression of the diffusion double layer (DDL) under high ionic strength conditions enlarges the diffusion path and enhances the migration of Cr(VI) through the pore flow paths. Moreover, hydrated bentonite effectively fills the interaggregate pores of natural clay, thus creating narrower and more tortuous flow paths. However, excessive bentonite increases the pH value and pore volume, resulting in changes to the soil microstructure and disrupting the continuous skeleton of natural clay, which is unfavorable for Cr(VI) containment. Based on the study of the Cr(VI) contaminated site, a bentonite ratio of 2:10 is recommended for optimal natural performance of the natural clay-bentonite barrier.

How does silicon alleviate Cd-induced phytotoxicity in barley, Hordeum vulgare L.?

Toxic heavy metal accumulation in edible plants has become a problem worth worrying about for human health. Cadmium is one of the most toxic metals presenting high bioavailability in the environment. The main route of transfer of Cd to humans is the consumption of contaminated food which suggests that reducing of Cd absorption by plants could reduce this risk. In this context, it was suggested that silicon supply would be able to limit the transfer of Cd to the plants. Thus, this work evaluated the effects of 0.5 mM Si on Cd absorption and accumulation in barley (Hordeum vulgare L.). Plants were grown hydroponically for 21 days in the presence of 0 and 15 μM Cd2+ combined or not with 0.5 mM Si. Analyses were related to growth and photosynthesis parameters, Cd accumulation in organs and Cd subcellular distribution in the shoots. Results showed that, under Cd alone, plants showed severe toxicity symptoms as chlorosis and necrosis and produced significantly less biomass as compared to control. 0.5 mM Si in the medium culture significantly reduced Cd-induced toxicity by mitigating symptoms and restoring growth, photosynthesis, and nutrition. Si also induced a significant reduction of Cd concentration in plants and changed its sub-cellular compartmentalization by enhancing fixation to cell walls and reducing the Cd concentration in the cytoplasmic and organelles fractions. These data suggest that the application of Si could significantly increase Cd tolerance and reduce the risk of the Cd accumulation in edible plants.

Assessment of heavy metals and its treatment through phytoremediation in groundwater along River Kabul in district Charsadda

Life cannot exist without water. Water scarcity is caused by massive groundwater decline. Water contamination is the most common problem spreading worldwide quicker than ever, along with anthropogenic water scarcity. Since tainted water can harm health, water contamination is also contributing to water scarcity. Heavy metals in drinking water have plagued most Asian, African, and European nations for decades. Studies reveal that heavy metals have caused damage in Pakistan, India, and China. This study detects heavy metals in groundwater and treats them with phytoremediation along the river Kabul in district Charsadda. It also measures pH, EC, TDS, turbidity, fluoride, phosphates, nitrites, and nitrates. All indicators meet the WHO and national environmental quality criteria for drinking water, except for turbidity, which exceeds the limit of ≤5 NTU in four examined regions, reaching a maximum of 9.99 NTU. Chemical parameters were within the standard limits, except for high concentrations of arsenic (As) and cadmium (Cd) in samples from S2 (15.20 μg/L) and S1 (20.50 μg/L) compared to WHO’s 10 and 5 μg/L standards. However, the limit is within EPA Pakistan’s 50 and 100 μg/L standards for drinking water, which Pakistan still follows. Heavy metals can harm health, even at low levels. Since the majority of the study area’s population relies on groundwater for drinking and other needs, heavy metal pollution of the groundwater can cause many ailments. Thus, phytoremediation is increasingly vital to reduce these heavy metals to WHO limits to protect human health and the environment.

Solid–liquid partitioning and speciation of Pb(II) and Cd(II) on goethite under high pH conditions, as examined by subnanomolar heavy metal analysis, X-ray absorption spectroscopy, and surface complexation modeling

The adsorption of heavy metals on iron oxides generally increases with pH and is almost complete at neutral to slightly alkaline pH. However, almost complete adsorption on a linear scale does not imply sufficient removal of the heavy metals in terms of their toxicity. Here, we elucidated the chemical reactions that determine the solid-liquid partitioning of Pb(II) and Cd(II) on goethite at high pH. While the removal of both heavy metals was almost complete on a linear scale above pH 7 for Pb(II) and pH 9 for Cd(II), the dissolved metal concentrations decreased on a logarithmic scale with pH, reaching minima at around pH 10 for Pb(II) and pH 10-11 for Cd(II), and then they increased with pH thereafter. The XAFS spectra of Pb(II)- or Cd(II)-adsorbed goethite prepared at pH > 11 were almost the same as those at neutral pH, suggesting that removal of the heavy metals from solution was achieved by a single adsorption reaction over the entire pH range. Based on the observed macroscopic and microscopic adsorption behaviors at high pH, a robust surface complexation model was developed to predict the solid-liquid partitioning of divalent heavy metals over the entire pH range.