Heavy Metals Research Articles

Fluorescence detection and effective adsorption of trace Pb(II) based on nanofibrous metal-organic gel

Water pollution has become a global environmental problem, such as that caused by Pb(II). Therefore, there is an urgent need to develop multifunctional materials for Pb(II) monitoring and removal. Yet, developing bifunctional materials for sensitive detection and efficient removal of Pb(II) remain challenging. Here, a metal-organic gel (HNU-G4) was constructed for sensible responsive detection and efficient adsorption of Pb(II). The dry gel was obtained through the freeze-dried process and can be used for the Pb(II) detection via fluorescence quenching; the lowest limit of detection for Pb(II) is 0.766 ppb. Furthermore, HNU-G4 has an effective maximum adsorption capacity of 480.00 mg·g-1 for Pb(II) in water. Additionally, the gel demonstrates excellent recoverability and interference resistance, which can be used in the detection and recovery of actual reclaimed water samples to prevent secondary contamination. This study developed a bifunctional gel material for sensitive detection and effective removal of Pb(II) from water, providing a suggested strategy to tackle the heavy metal contamination problem.

Determination of Some Element’s Migrants in Aqueous Simulant from Plastic Food Contact Products by Inductively Coupled Plasma Mass Spectrometer

AbstractVarious chemicals present at different stages in the food supply chain can lead to the leaching of heavy metals. These metals can accumulate in the human body through the consumption of contaminated food. Consequently, it is necessary to validate an analytical technique for the quantification chemical that could contaminate food. This study presents a rapid, straightforward, and efficient analytical method for the direct quantification of some potentially toxic elements in aqueous simulants from plastic food contact products using an inductively coupled mass spectrometer (ICP-MS). The method’s validation encompassed the study of the estimated detection limits, practical quantification limits, linearity, accuracy, and measurement uncertainty of aluminium (Al), antimony (Sb), arsenic (As), cadmium (Cd), chromium (Cr), cobalt (Co), copper (Cu), iron (Fe), lead (Pb), manganese (Mn), nickel (Ni), and zinc (Zn) under optimized ICP-MS conditions. The estimated detection limits ranged from 7.5 × 10−4 to 0.074 mg/kg, while practical quantification limits spanned from 0.02 to 0.8 mg/kg. The average recoveries ± standard deviations at different spiking levels were varied between 85.7 ± 1.51 and 115.6 ± 0.88% with coefficients of variation between 0.42 and 5.85%. The method trueness was verified by using references materials (test material in aqueous acetic acid) purchased from Food Chemistry Proficiency Testing and Analysis (FAPAS) yielding satisfactory results within acceptable recovery and Z-score values. The method precision, in terms of relative standard deviation (RSD), was being below 4.22%. The method uncertainty expressed as expanded uncertainty of all validated elements was found to be ≤ 21.9%. Validated method was employed to determine specific elements in aqueous simulants of thirty commercial plastic food packaging samples, representing three distinct types of plastic polymers. The results showed that the mean concentrations, in mg/kg, were as follows: 2.04 (Al), 0.02 (As), 0.02 (Cd), 0.02 (Co), 0.06 (Cr), 0.41 (Cu), 1.55 (Fe), 0.09 (Mn), 0.15 (Ni), 0.07 (Pb), 0.05 (Sb), and 0.81 (Zn). Furthermore, 30% of analyzed samples exceeding the maximum permissible limits of Al for plastic materials and articles intended to come into contact with food.

Profile of Bacterial Communities in Copper Mine Tailings Revealed through High-Throughput Sequencing

Mine-tailing dumps are one of the leading sources of environmental degradation, often with public health and ecological consequences. Due to the complex ecosystems generated, they are ideal sites for exploring the bacterial diversity of specially adapted microorganisms. We investigated the concentrations of trace metals in solid copper (Cu) mine tailings from the Ovejería Tailings Dam of the National Copper Corporation of Chile and used high-throughput sequencing techniques to determine the microbial community diversity of the tailings using 16S rRNA gene-based amplicon sequence analysis. The concentrations of the detected metals were highest in the following order: iron (Fe) > Cu > manganese (Mn) > molybdenum (Mo) > lead (Pb) > chromium (Cr) > cadmium (Cd). Furthermore, 16S rRNA gene-based sequence analysis identified 12 phyla, 18 classes, 43 orders, 82 families, and 154 genera at the three sampling points. The phylum Proteobacteria was the most dominant, followed by Chlamydiota, Bacteroidetes, Actinobacteria, and Firmicutes. Genera, such as Bradyrhizobium, Aquabacterium, Paracoccus, Caulobacter, Azospira, and Neochlamydia, showed high relative abundance. These genera are known to possess adaptation mechanisms in high concentrations of metals, such as Cd, Cu, and Pb, along with nitrogen-fixation capacity. In addition to their tolerance to various metals, some of these genera may represent pathogens of amoeba or humans, which contributes to the complexity and resilience of bacterial communities in the studied Cu mining tailings. This study highlights the unique microbial diversity in the Ovejería Tailings Dam, including the discovery of the genus Neochlamydia, reported for the first time for heavy metal resistance. This underscores the importance of characterizing mining sites, particularly in Chile, to uncover novel bacterial mechanisms for potential biotechnological applications.

Development and performance evaluation of medical radiation-reducing creams using eco-friendly radiation-shielding composites

To ensure the safety of medical personnel in healthcare organizations, radiation-shielding materials like protective clothing are used to protect against low-dose radiation, such as scattered rays. The extremities, particularly the hands, are the most exposed to radiation. New materials that can be directly coated onto the skin would be more cost-effective, efficient, and convenient than gloves. We developed protective creams using eco-friendly shielding materials, including barium sulfate, bismuth oxide, and ytterbium oxide, to avoid harmful effects of heavy metals like lead, and tested their skin-protective effects. Particularly, the radiation-shielding effect of ytterbium oxide was compared with that of the other materials. As shielding material dispersion and layer thickness greatly affect the efficacy of radiation-shielding creams, we assessed dispersion in terms of the weight percentage (wt%). The effective radiation energy was reduced by 20% with a 1.0-mm increase in cream thickness. Ytterbium oxide had a higher radiation-shielding rate than the other two materials. A 28% difference in protective effect was observed with varying wt%, and the 45 wt% cream at 63.4 keV radiation achieved a 61.3% reduction rate. Higher content led to a more stable incident energy-reducing effect. In conclusion, ytterbium oxide shows potential as a radiation-shielding material for creams.

Cyperus longus to bioremediate heavy metals in aqueous solutions

Finding environmentally friendly methods for the bioremediation of the environment, including water, contaminated with heavy metals is of utmost significance. The ability of 50 Cyperus longus species, harvested from Shadegan International Wetland, Iran, for the phytoremediation of heavy metals in contaminated water was investigated. The plants were transplanted in the aquariums contaminated with one of the heavy metals (0–20 mgL-1) at the pHs of 4 and 7 for 30 days. Plant removal of heavy metals was determined. The single and double interactions of plant tissue, heavy metal type and concentration, and pH significantly affected the absorption of plant heavy metals. The highest removal of heavy metals including Pb (45.9 %) > Zn (36.1 %) > Cr (32.8 %) > Cd (27.5 %) > Ni (25.9 %) was related to the 20 mgL-1 and pH4 treatments by the order of root> stem> leaf> flower. The 5–10 mgL-1 concentration resulted in the highest removal efficiency by stems (Ni, 44.12 %), flowers (Zn, 44.00 %), leaves (Cr, 44.14 %) and roots (Cr, 44.36 %). The highest bioconcentration (BCF) and translocation factors (TF) of 4.106 and 2 (Zn), 2.124 and 1.461 (Cd), 1.815 and 1.289 (Ni), 5.291 and 2.460 (Pb), and 2.811 and 1.885 (Cr) were resulted. Although with increasing heavy metal concentrations, the plant absorbed higher heavy metals, its removal efficiency decreased as it was the highest at the heavy metal concentration of 5–10 mgL-1. According to plant removal efficiency and the BCF and TF factors, it is possible to efficiently bioremediate water contaminated with heavy metals using C. longus.

Sleep duration mediates the association between heavy metals and the prevalence of depression: an integrated approach from the NHANES (2005-2020).

This study investigates the association between heavy metal exposure and the prevalence of depression, with the mediating role of sleep duration. Our study investigated the association between heavy metal concentration and depression risk in the NHANES from 2005 to 2020. We used logistic regression analysis, WQS regression model and BKMR model to assess the association. Mediation analysis was performed to explore the role of sleep duration in heavy metal exposure-induced depression. Of the 10,825 individuals included in this study, 705 (6.85%) were diagnosed with depression. We found a positive association between the cadmium (Cd), cobalt (Co), lead (Pb), antimony (Sb), wolfram (W) concentration and the prevalence of depression. Moreover, heavy metals mixtures were positively correlated with the prevalence of depression, with Cd identified as the main contributor in the WQS regression model (0.4654). Furthermore, sleep duration mediated the association between Cd, molybdenum (Mo), Pb, Sb, W exposure and prevalence of depression, explaining 3.12%, 15.84%, 18.24%, 9.56%, 3.68% of the effect. The findings affirm that heavy metal exposure is linked to higher depression incidence and that this relationship is partly mediated by sleep duration alterations. The study underscores the importance of environmental health monitoring and interventions aimed at reducing heavy metal exposure to mitigate its psychological impacts.

Comprehensive monitoring of contamination and ecological-health risk assessment of potentially harmful elements in surface water of Maroon-Jarahi sub-basin of the Persian Gulf, Iran.

The increase in heavy metal concentration in water bodies due to rapid industrial and socio-economic development significantly threatens ecological and human health. This study evaluated metal pollution and related risks to ecology and human health in the Maroon-Jarahi river sub-basin in the Persian Gulf and Oman Sea basin, southwest Iran, using various indicators. A total of 70 water samples were taken from the sampling sites in the Maroon, Allah, and Jarahi sub-basins and analyzed for nine heavy metals. According to the results, the mean concentration of metals in the sampling locations across the entire sub-basin of Maroon-Jarahi was observed as follows Iron (528.22µg/L), zinc (292.62µg/L), manganese (56.47µg/L), copper (36.23µg/L), chromium (11.78µg/L), arsenic (7.09µg/L), lead (3.43µg/L), nickel (3.23µg/L), and cadmium (1.38µg/L). Most of the metals were detected at the highest concentration in the sub-basin of the Jarahi River. The Water Quality Index (WQI) index in the basin varied from 18.74 to 22.88, indicating well to excellent quality. However, the investigation of the pollution status at the monitoring stations, based on the classification of Degree of Contamination (CD) and Heavy Metal Pollution Index (HPI) indices, revealed that they are in the category of relatively high pollution (16 < CD < 32) to very high (32 ≤ CD), and in the low pollution category (HPI < 15) to high pollution (HPI < 30), respectively. According to the three sub-basins, the highest amount of WQI, HPI, and Cd was observed in the stations located in the sub-basins of the Jarahi River. The calculation of Heavy Metal Evaluation Index (HEI) also indicated that only 10% of the monitoring stations are in moderate pollution (10 < HEI < 20), while in other monitoring stations the HEI level is less than 10. The Potential ecological risk factors ( ) of an individual metal was obtained as follows: Cd (173.70) > As (131.99) > Zn (57.52) > Cu (55.39) > Ni (48.98) > Cr (21.57) > Pb (0.71), revealing that Cd and As are the main elements responsible for creating ecological risk in the studied area. The Maroon-Jarahi watershed included areas with ecological risks that ranged from low (PERI ≤ 150) to very high (PERI ≥ 600). HI and ILCR health indicators indicated that consumption and long-term contact with river water in the study area can cause potential risks to human health, especially children. Moreover, the findings, the highest level of pollution and health risk for both children and adults, considering both exposure routes, occurred in the Jarahi River sub-basin, suggesting that those who live in the vicinity of the Jarahi River are likely to face more adverse health effects. In addition, the findings of the evaluation of the relationship between land use patterns and water quality in the studied basin showed that agricultural lands acts as a main source of pollutants, but forest lands play an important role in the deposition of pollutants and the protection of water quality at the basin scale. In general, the results of pollution indicators, risk assessment, and statistical techniques suggest that the lower sub-basin, the Jarahi area, and the Shadegan wetland are the most polluted areas in the investigated sub-basin due to excessive discharge of agricultural runoff, industrialization, and rapid urbanization. Thus, special measures should be considered to reduce the risks of HMs pollution in the sub-basin of the Maroon-Jarahi watershed, especially its downstream and the impact of agricultural land use on water quality should be taken into consideration in basin management plans.

Sources Analysis and Health Risk Assessment of Heavy Metals in Street Dust from Urban Core of Zhengzhou, China

Fifty-one street dust samples were systematically collected from the urban core of Zhengzhou, China, and analyzed for potentially toxic metals. The concentrations of vanadium (V), manganese (Mn), copper (Cu), zinc (Zn), arsenic (As), lead (Pb), and nickel (Ni) in the samples surpassed the background values of the local soil, indicating a notable potential for contamination. Spatially, the traffic area was the most polluted with a total heavy metal concentration of Cu, Zn, As, Pb, and Ni, while the pollution levels were lower in the culture and education area and commercial area with total concentrations of V and Mn. Seasonal variations were discerned in the concentrations of heavy metals, with V, Cu, Zn, and As exhibiting heightened levels during the fall and winter, while Mn, Ni, and Pb reached peaks in the spring season. Zn exhibited the highest mean geo-accumulation index (Igeo) value at 2.247, followed by Cu at 2.019, Pb at 0.961, As at 0.590, Ni at 0.126, Mn at −0.178, and V at −0.359. The potential ecological risk index (RI) in the traffic-intensive area markedly exceeded other functional areas. Health risk assessments showed that children were more vulnerable to heavy metal exposure than adults, particularly through the ingestion pathway. Correlation analysis, principal component analysis (PCA), and cluster analysis (CA) were applied in conjunction with the spatial–temporal concentration patterns across various functional areas to ascertain the plausible sources of heavy metal pollutants. The results indicated that heavy metals in the urban street dust of Zhengzhou were multifaceted, stemming from natural processes and diverse anthropogenic activities such as coal burning, industrial emissions, traffic, and construction operations.

Mechanical, freeze-thaw resistance and heavy metals leaching properties of alkali-activated recycled concrete powder solidified sludge

Solidified sludge was an efficient method to consume the large amount of sludge, which can be used as the subgrade filler in road engineering. However, the traditional solidified materials, such as cement and lime, consumed a large amount of natural resources and increased carbon emissions. This study used the alkali-activated recycled concrete powder (ARCP) to solidify sludge, which could be used as a potential subgrade stabilization filler. The optimal factors of ARCP were firstly determined by orthogonal test according to the compressive strength. Then the influences of different ARCP dosage, sludge moisture content and curing method on the mechanical properties, freeze-thaw resistance and heavy metals immobilization of the ARCP solidified sludge (ARCPS) were investigated. At last, microstructures of ARCPS were analyzed by SEM, XRD and TG-DTG tests. The experimental results demonstrated that the optimal mixture for ARCP: the silicate modulus of 1, liquid-solid ratio of 0.48 and calcium hydroxide content of 3 %. The solidified process by ARCP improved the mechanical properties and freeze-thaw resistance of ARCPS greatly. The 7 d unconfined compressive strength of ARCPS could reach 1305–2033 kPa when the sludge moisture content was 15 %, which meet the requirement of 500 kPa from the Chinese standard. The frost heaving rates of ARCPS were between non-frost heaving and mild frost heaving. The sludge moisture content was the most important factor affecting the freeze-thaw resistance of ARCPS. The properties of ARCPS were further improved after carbonation curing. The leaching mass concentration of heavy metals decreased significantly after the solidification of sludge. After 5 freeze-thaw cycles, the heavy metal leaching concentration increased but was still met the requirement of standards. SEM results showed that the surface of carbonated ARCPS was covered by dense scale-like carbonation products, which further enhanced the strength and freeze-thaw resistance of ARCPS. The results can be used to guide the application of sludge and ARCP in construction.

Association between Mixed Heavy Metal Exposure and Arterial Stiffness, with Alkaline Phosphatase Identified as a Mediator.

Elevated arterial stiffness has been associated with exposure to heavy metals such as lead (Pb) and cadmium (Cd). However, the collective impact of multiple metals and the underlying mechanisms are not fully elucidated. The purpose of this study was to assess the combined effects of exposure to nine heavy metals on arterial stiffness and explore whether serum alkaline phosphatase (ALP) acts as a mediator in this relationship. In the retrospective analysis, data from 8,700 participants were retrieved from the National Health and Nutrition Examination Survey (NHANES) spanning from 1999 to 2018. Arterial stiffness was measured by estimated pulse wave velocity (ePWV). The cumulative impact of exposure to multiple metals was examined using adaptive elastic-net, environmental risk score, weighted quantile sum regression, and quantile g-computation. Additionally, mediation analysis was conducted to explore the potential mediating role of serum ALP. We found that combined exposure to multiple metals was consistently associated with elevated ePWV, with Ba, Pb, and Sb exhibiting the greatest contributions. Notably, serum ALP partially mediated the associations between individual (Pb, Sb) and mixed metal exposure with ePWV, with mediation proportions at 10.76% for Pb, 18.22% for Sb, and 11.07% for mixed metal exposure. In conclusion, this study demonstrates a clear association between exposure to heavy metals, either individually or in combination, and heightened arterial stiffness. Furthermore, the findings suggest that serum ALP activity may act as a mediator in these relationships.

Study of the Relationship Between Antioxidant Enzymes in the Blood of Women Suffering From Miscarriage and The Effect of Heavy Metal Pollution on Them in Basra, Iraq

In this study, environmental heavy metal pollution is associated with recurrent miscarriage. It is closely linked to oxidative stress and homeostasis imbalance due to reproductive toxicity resulting from (HM), as lead (Pb) and mercury (Hg) are considered among the most important biological factors that are hostile to human health and can reduce the possibility of a healthy pregnancy. This study aimed to investigate the effect of antioxidant enzymes as well as some heavy metals such as lead and mercury on recurrent miscarriage. Comparing them to healthy women with no history of miscarriage. Samples were collected from women who had miscarried, 50 samples, compared to 40 samples from healthy women who had not suffered a miscarriage previously. In Basra Women's and Children's Hospital in Basra, Iraq. During the reproductive age of patients and healthy people (18-40) years. The patients were divided into two groups according to place of residence (city center and countryside). And compare them with healthy women. He also highlighted oxidative stress because it is more affected by heavy metals and the appearance of women who have frequent miscarriages who live in rural areas, where oil and gas refineries are close to them, unlike the city. Due to direct exposed to pollution.

Modeling and simulation for the sustainable recovery of aromatics (BTX) from petrochemical industrial wastewater.

Petrochemical wastewater is a major industrial source of pollution that produces a variety of toxic organic and inorganic pollutants, naturally present or added during the process. These pollutants are a serious threat to the soil, water, environment, and human being due to their complex and hazardous nature. Glycols such as monoethylene glycol (MEG), diethylene glycol (DEG), triethylene glycol (TEG), and aromatics (BTX-benzene, toluene, and xylene) are the most common organic impurities present in petrochemical wastewater. The objective of this paper is to recover aromatics and water from petrochemical industrial wastewater. The reclamation process is used to remove inorganic impurities such as heavy metals Fe, Zn, Pb, Mn, Al, Ni, As, Cr, Cu, Cd, and K and salts. In the present work, 1% sodium bi-carbonate (NaHCO3) is used to precipitate the inorganic impurities present in the wastewater at 40°C atmospherically. Aspen Hysys simulation software is used for modeling and simulation for the treatment process using NRTL (non-random-two-liquid) thermodynamic model. The process generated from Aspen Hysys is validated with lab experiments. To support global sustainable development, this study is focused on reducing, reusing, and recycling separation techniques such as centrifuge separation and vacuum distillation have been used. The characterization of regenerated water was performed using ICP-OES (inductively coupled plasma-optical emission spectroscopy) to determine the reduction in heavy metals. It was found that > 99.5% of heavy metals were removed. The regeneration of these aromatics is necessary for economic and environmental reasons so that it can be reused to avoid its disposal in and contamination of natural environments.

Tetrasodium iminodisuccinate modified montmorillonite for Pb and Cd adsorption from water: Characterization and mechanism

Heavy metal pollution is a huge hazard to the water environment and modified clay adsorbents have been widely used to remove heavy metals from water. Degradable anionic chelating agents have a greater potential for the immobilization of heavy metals, so tetrasodium iminodisuccinate (IDS) was introduced to modify montmorillonite (Mt) for Pb(II) and Cd(II) adsorption from water in this study. IDS was bound with Mt by sonication, heating, and acidity to form IDS-Mt, and characterized by XRD, FT-IR, SEM, and zeta potential analyzer. The batch adsorption experiments revealed that IDS-Mt5 had excellent adsorption capacity of Pb(II) and Cd(II) up to 214.73 mg/L and 104.07 mg/L, respectively. The adsorption process of IDS-Mt on Pb(II) and Cd(II) was consistent with the Sips model and PSO model, indicating that the adsorption was heterogeneous and chemical. The adsorption capacities of IDS-Mt in the second cycle remained above 76 % for Pb(II) and 69 % for Cd(II) of the initial ones, respectively. IDS was immobilized on the interlayer and edge surfaces of Mt through interactions or forming hydrogen bonds facilitated by ultrasonic under acidic heating conditions. Pb(II) and Cd(II) were immobilized by IDS-Mt through cation exchange, negative charge attraction at the edge surface, and IDS chelation. IDS-Mt was an excellent adsorbent with strong dispersibility and swelling properties for Pb(II) and Cd(II) removal from contaminated water. This study provides a new solution for the anionic modification of Mt and a new material for the treatment of heavy metal wastewater.

Modern methods for determining heavy metals in soil

This article discusses the problem of heavy metal detection in soil and its impact on vegetation. Based on the experience of foreign and domestic research, this article discusses global fundamental problems and challenges, modern methods of heavy metal detection, as well as prospects for further research and new challenges facing the scientific community. The aim of the study is to identify modern and established methods for the detection of heavy metals in soil, such as spectral analysis methods and reflectance spectra of plant parts. The review summarizes the results of experimental studies confirming the effectiveness of the combined sampling and spectrometry method for estimating the concentration of heavy metals in soil, as well as the feasibility of using plant reflectance spectra to measure pollution. World experience confirms the expediency of using spectral approaches to determine heavy metals in soil and analyze their impact on vegetation. The results of the research have practical application in the field of ecology, agriculture and nature protection, allow effectively controlling the level of heavy metal pollution and taking measures for its elimination.

Assessment of the Modifying Effect of Zinc and Copper on Toxic Stress of Barley Plants Caused by Cadmium

In a vegetation experiment on sod-podzolic sandy loam soil with Cd2+ addition at doses of 25 and 45 mg/kg, we studied how the response of barley plants to the toxic effects of cadmium changes if various amounts of heavy metals (HM) with the functions of trace elements were introduced together with it, using the example of zinc and copper. In addition, several variants were laid, in which copper and zinc were also introduced along with cadmium. Thus, doses and combinations of metals were used in the experiment: Cd45, Cd25Cu50, Cd25Cu100, Cd25Cu100, Cd25Cu200, Cd45Cu50, Cd45Cu100, Cd45Cu200, Cd45Zn50, Cd45Zn100, Cd45Zn150. Morphometric parameters (appearance, height of plants, their biomass and leaf area), biochemical parameters (accumulation of MDA, total antioxidants and crude protein), crop structure (straw weight, grain weight, 1000 grain weight) were evaluated in experimental plants. In addition, the gross content of HM and other elements in the soil and their transition to the soil solution were analyzed. It is shown that the introduction of cadmium alone led to a significant inhibition of the growth and development of barley plants. At the same time, the combined addition of HM trace elements with cadmium significantly modified the effect of cadmium. Zinc contributed to a decrease in the toxic effects of cadmium, and the intensity of this effect increased as the concentration of zinc increased, and the toxic effects of this HM at the doses considered had not yet manifested themselves. Copper, as a more toxic element, showed its stimulating effect at lower doses than zinc, and at higher doses, the development of acute stress caused by the combined toxic effects of 2 HM was observed. This is true for a dose of cadmium of 45 mg/kg, with a lower dose of cadmium (25 mg/kg), copper had a greater stimulating effect. The considered effects were primarily noted when evaluating morphometric indicators and productivity. Based on the biochemical parameters, it was not possible to draw clear conclusions about how the addition of zinc and copper changed the effects of cadmium. Apparently, it was more appropriate to use other biochemical parameters to assess stress effects. It was noted that the introduction of trace elements generally contributed to a reduction in the accumulation of cadmium in the aboveground biomass of barley plants, however, the addition of zinc led to an increased transition of cadmium into straw, but not into grain.

Analysis of heavy metals in sediments with different particle sizes and influencing factors in a mining area in Hunan Province

Heavy metals mainly exist on the surface of sediment particles and are transported using particulate matter as carriers. Therefore, the particle size of sediment particles can affect the adsorption, release, and migration of heavy metals. This study aim to investigate the distribution characteristics and chemical fraction of Cd, Pb, and As contents in sediments of different particle sizes using the BCR method, and to determine the key factors affecting the distribution of heavy metals through mineralogical methods such as XRD and EDS. The results revealed that the overall content of various forms of heavy metals increases with the decrease of particle size, mainly presents in fine particles. The mineralogical analysis results indicated that fine particles predominantly contained clay minerals such as chlorite and illite and coarse particles mainly include primary minerals. Due to the mining areas in the middle-upstream, Cd, Pb and As were primarily associated with galena, sphalerite and pyrite, respectively. The distribution of heavy metals is jointly influenced by sediment particle size and sediment material composition.

Using magneto-optical effects in soft X-ray reflectivity to study current driven magnetization reversal

The soft X-ray reflectivity technique is frequently utilized for studying magnetization reversal in thin films due to its elemental and depth sensitivity. The characteristic hysteresis loops measured with this technique are dependent on both the magnetization direction in magnetic materials and the incident soft X-ray polarization. In this note, we have discussed these magneto-optical effects in soft X-ray reflectivity measurements. These effects can be exploited to probe magnetization reversal mechanisms driven by stimuli beyond conventional means of magnetic field. To demonstrate this, we have presented our investigations on current-induced magnetization switching in ferromagnet (FM)/heavy metal(HM) heterostructures.

A Spatial–Seasonal Study on the Danube River in the Adjacent Danube Delta Area: Case Study—Monitored Heavy Metals

Monitoring and protecting flowing watercourses is a complex and challenging task that requires the collaboration and coordination of various stakeholders such as governments, industries, farmers, consumers and environmental groups. The study of the dynamics of the concentration of polluting factors and especially the concentrations of heavy metals and highlighting a seasonal variation is a necessary element from this point of view. In this article, we present the results of our analyses carried out in two measurement campaigns executed in 10 monitoring points along the Danube River, between Braila city and Isaccea city in the pre-deltaic area, during the summer season and autumn season 2022. The importance of this area is given by the fact that the Danube Delta is part of the UNESCO heritage, and the monitoring of polluting factors is a necessity in the desire to protect this area. The data measured during the July and August 2022 campaign cover a wide range of chemical species: Phosphate, CCO, CBO5, NH4+, N-NO2, N-NO3−, N-Total, P-PO4 3−, SO42−, Cl−, phenols, as well as metals with a harmful effect: Al, As, Cd, Cr, Fe. The study includes an evaluation based on the statistical approach of the results to highlight the significant correlations and differences identified between the two data sets. Next, to highlight the obtained results, a numerical model was considered using HEC-RAS and ESRI ArcGIS applications in a two-dimensional unsteady flow model in order to obtain the non-homogenous concentrations’ distributions in the studied area. These two-dimensional models have been less studied in the specialized literature. In this way, interesting results could be obtained, and prediction methods regarding the dynamics of metal concentrations could be structured. The data obtained were used for the terrain model from the USGS service, and the flows of the Danube and its two tributaries were simulated using the data provided by the national services. In this work, we present the results obtained for the dynamics of the concentrations of the metals Al, As, Cd, Cr and Fe and the evaluation of the specific absorption coefficients for the explanation and correlation with the results of the measurements. Except for the numerical model presented, we would like to highlight the existence of some contributions of the main tributaries of the Danube in the study area. Such a systematic study has not been carried out due to conditions imposed by the border authorities. From this point of view, this study has an element of originality. The study is part of a more complex project in which the spatio-temporal distribution of the polluting factors in the water was evaluated, and the habitats in the study area were inventoried—especially those of community interest. In this way, we were able to expose the self-purification capacity of the Danube and highlight the existence of a concentration reduction gradient along the course of the river. The aspects related to the influence of the distribution of polluting factors on the state of health will be the subject of another article.

Removal mechanism of phosphorus in water by calcium hydroxide modified copper tailings

With the development of industry and agriculture, eutrophication caused by increasing amounts of phosphorus in the environment has attracted people's attention. On the other hand, copper tailings (CT) is a kind of solid waste with large quantity, large area, and easy to cause groundwater and soil pollution. CT is also a potential resource because of its large specific surface area. CT is intended to be used as an adsorbent for removal phosphate in water, but trace heavy metals and a small amount of phosphate in CT may bring negative effects. Calcium hydroxide (Ca(OH)2) was used to modify CT (CCT), hoping to fix the heavy metals and phosphate in CT at the same time. It was found that the removal capacity of CCT was significantly higher than that of CT. The process of phosphate removal by CCT involves electrostatic sorption and surface precipitation, and there is a synergistic effect between CT and Ca(OH)2. The phosphate removal rate of CCT-0.4 increased with the increase of pH value under alkaline conditions. The XRD patterns of phosphate sorption by CCT mean that Ca3(PO4)2, Ca5(PO4)3(OH) and AlPO4 exist in CCT after phosphate removal, indicating that surface precipitation occurs during the removal process. In summary, the removal mechanism of phosphate by CCT is mainly electrostatic attraction and surface precipitation.

Acute Toxicity of Zinc Sulphate (ZNSO4) on the Estuarine Blood Clam Anadara granosa (Linnaeus, 1758)

Zinc is an essential trace element for taking role in electron transfer in many enzymatic reactions. However, its prolonged and excessive intake may lead to toxic effect. Aquatic organisms take up zinc in proportion to the dissolved concentration of the metal in water. Generally, uptake occurs throughout epithelial surfaces related to absorption and excretion of ions such as the gill membranes. Heavy metals can accumulate in the tissues of aquatic organisms and cause a range of hazardous effects to all organisms through bio-magnifications. There are a number of studies carried out on the toxicity of Zinc sulphate. The aim of this study was to investigate the acute toxicity effects of Zinc sulphate on the clam Anadara granosa. Clam samples were exposed to different concentrations (3, 6, 9, 12, and 15.00 mg/L) of Zinc sulphate for 96h and their cumulative mortality was calculated in 12 hours intervals. Results were analyzed by SPSS 20 to obtain number of cumulative mortality and lethal concentrations. The blood clam Anadara granosa LC50 and LC90 for zinc sulphate at 96 hours were 4.63 and 9.28mg/L in the current study. Mortality rate was increased with the increase in metal concentrations and time.