Growth Behavior Research Articles

STRUCTURAL AND STOCHASTIC BEHAVIOR OF MEXICAN AGRICULTURAL EXPORTS

Mexican agricultural exports have grown faster than the country’s economy, suggesting a foreign exchange inflow and the use of production factors in Mexico. This work examines both the structural behavior of the agricultural exports and its stochastic behavior using data from 1993 to 2023. The structural part is modeled with three explanatory behaviors: first, the influence in exports of the U.S. economy through its Gross Domestic Product (GDP); second, the effect of the Mexican economy through its own GDP; and third, the search for a more profitable price abroad was modeled with the real exchange rate. On the other hand, the stochastic behavior was modeled with lags of the actual exports and other explanatory variables. After adjusting an autoregressive distributed lag model and verifying the existence of a long-term relationship between Mexican agricultural exports, U.S. GDP, Mexican GDP, and the real exchange rate, it was found that the behavior of the export growth is largely explained by the U.S. economy.

An improved phase-field model for fatigue crack growth considering constraint effects

The phase field model is a promising method for simulating fatigue crack growth (FCG) behavior. However, the conventional phase field (PF) model may not adequately account for constraint effects, where fracture toughness is affected by geometries. Therefore, stress triaxiality is incorporated into the PF model by modifying the fracture energy release rates to consider constraint effects. The model successfully simulates the FCG behavior of different geometries, such as CT, SENB, and MT specimens, as well as the mixed-mode FCG behavior of CTS specimens and other complex geometries. All simulations agree well with experiments, proving that our model is capable to capture the constraint effects in FCG behavior. These findings indicate that stress triaxiality is important to capture the constraint effects.

Sea buckthorn and its flavonoids isorhamnetin, quercetin, and kaempferol favorably influence bone and breast tissue health.

Bone tissue and breast tissue are interrelated, as demonstrated by breast microcalcifications, breast cancer bone metastases, bone morphogenetic proteins, and Wnt signaling. In addition, osteoblasts and osteoclasts represent an important switch of tumor cell dormancy during bone metastasis. Damage to both types of tissues mentioned above is highly prevalent, especially in postmenopausal women, and manifests itself in osteoporosis and breast cancer. Sea buckthorn (Elaeagnus rhamnoides L.), a botanical drug with high antioxidant, antitumor, anti-inflammatory, immunomodulatory, and regenerative properties, has great therapeutic potential due to the unique composition of its bioactive metabolites. This review aimed to summarize the current knowledge from in vitro and in vivo studies on the effect of sea buckthorn, as well as its most widespread flavonoids isorhamnetin, quercetin, and kaempferol, on bone and breast tissue health. In vitro studies have revealed the beneficial impacts of sea buckthorn and aforementioned flavonoids on both bone health (bone remodeling, mineralization, and oxidative stress) and breast tissue health (cancer cell proliferation, apoptosis, tumor growth, and metastatic behavior). In vivo studies have documented their protective effects against disturbed bone microarchitecture and reduced bone strength in animal models of osteoporosis, as well as against tumor expansion and metastatic properties in animal xenograft models. In any case, further research and clinical trials are needed to carefully evaluate the potential therapeutic benefits of sea buckthorn and its flavonoids. Based on the available information, however, it can be concluded that these bioactive metabolites favorably affect both bone and breast tissue health.

Nutrient screening of Chlorella vulgaris and C. variabilis using high-throughput biolog phenotype arrays

Microalgae, particularly Chlorella species, are versatile microorganisms with significant scientific potential in various domains, including recombinant protein production, wastewater treatment, biofuel production, bio-fertilizers, food source, pharmaceuticals, and carbon capture. However, conventional growth media have often been the default choice for Chlorella cultivation. This study utilizes Biolog phenotype array plates to explore the growth responses of Chlorella vulgaris and Chlorella variabilis to a broad spectrum of carbon, nitrogen, phosphorus, and sulfur sources. The growth dynamics were captured by integrating the area under the OD-time curve. The results revealed growth preferences for both Chlorella species, emphasizing their unique nutrient source requirements and illuminated some unexpected growth behaviors. C. vulgaris exhibited equal preference for trehalose as glucose, and C. variabilis was unable to metabolize nitrate or sucrose, two staples of modified BBM media most commonly used for its cultivation. These findings contribute to a deeper understanding of the metabolic capacities of C. vulgaris and C. variabilis, informing potentially more efficient and tailored microalgal cultivation practices across diverse applications.

Growth Behavior of Ni on Hydrogen-Etched WS2 Surface.

Transition metal dichalcogenides (TMDs) are 2D materials in which the layers are stacked together by van der Waals forces. Although TMDs are expected to be promising for electronic applications, forming a uniform electrode on them is challenging because of the low adhesion forces between metals and TMDs. This study focuses on improving the quality of metal electrodes by introducing atomic H to create surface defects, using Ni on WS2 as an example. The detailed effects of H etching and subsequent Ni growth were investigated using scanning tunneling microscopy (STM) and synchrotron-based X-ray photoemission (XPS) techniques. Our studies reveal that introducing point defects of ∼3.05 × 1011 cm-2 on the WS2 surface, results in a significant shift in Ni growth from the Volmer-Weber to a near Frank-van der Merwe mode. The origin of the change is the bond formation between the Ni and W atoms, which is expected to realize ohmic contact. The optimization of metal-TMD interfaces offers valuable insights for advanced applications.

Maize stigmas react differently to self- and cross-pollination and fungal invasion.

During sexual reproduction in flowering plants, tip-growing pollen tubes travel from the stigma inside the maternal tissues of the pistil towards ovules. In maize (Zea mays L.), the stigma is highly elongated, forming thread-like strands known as silks. Only compatible pollen tubes successfully penetrate and grow through the transmitting tract of the silk to reach the ovules. Like pollen, fungal spores germinate at the surface of silks and generate tube-like structures (hyphae) penetrating silk tissue. To elucidate commonalities and differences between silk responses to these distinctive invading cells, we compared growth behavior of the various invaders as well as the silk transcriptome after self-pollination, cross-pollination and infection using two different fungi. We report that self-pollination triggers mainly senescence genes, whereas incompatible pollen from Tripsacum dactyloides leads to downregulation of rehydration, microtubule, and cell wall-related genes, explaining the slower pollen tube growth and arrest. Invasion by the ascomycete Fusarium graminearum triggers numerous defense responses including the activation of monolignol biosynthesis and NAC as well as WRKY transcription factor genes, whereas responses to the basidiomycete Ustilago maydis are generally much weaker. We present evidence that incompatible pollination and fungal infection trigger transcriptional reprograming of maize silks cell wall. Pathogen invasion also activates the phytoalexin biosynthesis pathway.

Deformation, fracture, and fatigue crack growth behavior in TiB-reinforced near-α Ti matrix composites fabricated using powder metallurgy technique

Titanium matrix composites with TA15 alloy as the matrix and TiB (ranging from 0 to 4 vol%) as reinforcement were produced via powder metallurgy-based hot press sintering, employing AlB2 precursor. The addition of TiB to TA15 led to a substantial reduction in the colony and prior β grain sizes, and an increase in the lath thickness in the composites. Plastic deformation due to planar slip, which traverses across the α/β-ligament phase boundaries within each colony, may cause TiB particles located on colony boundaries to break, potentially more so than those within the colony. The composite containing 1 vol% TiB exhibited simultaneous improvements in strength, ductility, and strain hardening rate, attributed to colony refinement and possibly a sizable amount of intra-boundary TiB. Further increase in the TiB content led to significant drops in ductility, which was further exacerbated by the precipitation of α2-Ti3Al phase. A substantial decrease in the mode I fracture toughness, attributed to reduced colony size and diminished crack deflection, was noted in the composite with 1 vol% TiB. The colony size refinement also contributed to a reduction in the threshold stress intensity factor range, ΔK0, for the fatigue crack growth, owing to the decreased tortuosity of the fatigue crack front. This study elucidates the intricate relationship between TiB location, microstructure, and mechanical properties, providing insights for the design of TiB-reinforced titanium alloys with both α and β phases.

The impact of chemical inhomogeneity in calcinated powders on grain growth behavior and piezoelectric properties of lead-free KNN-based ceramic

Despite outstanding electromechanical properties are achieved in KNN-based ceramics, unstable reproducibility of piezoelectric properties remains a challenge to industrial production, owing to a lack of in-depth understanding of grain growth behavior and chemical homogenization throughout the overall solid-state synthesis process. Herein, a significant chemical heterogeneity behavior was found in calcinated 0.957K0.48Na0.52Nb0.96Sb0.04O3-0.04Bi0.5Na0.5ZrO3-0.003CaZrO3 powders owing to non-uniform diffusion and competitive chemical reaction among multicomponent reactants. The chemical heterogeneity is significantly alleviated by modulating calcination temperatures and ball-milling the calcinated powders. Furthermore, it was demonstrated that the heterogeneous calcinated powder with different particle size distribution plays a significant role in grain growth behavior and chemical homogenization of bulk ceramics. Finally, we obtained uniform grain size distribution and preferable chemical homogeneity in ceramics with the calcination of 900 oC and undergone twice ball milling, which exhibit superior piezoelectric properties (d33=368 pC/N, kp=0.52). This work provides an effective paradigm to ameliorate the inferior reproducibility of KNN-based ceramics by effectively regulating the processing condition during solid-state synthesis.

An analytical model for predicting fatigue crack arrest and growth behavior in metal plates strengthened with unbonded prestressed reinforcing strips

Fatigue crack arrest and life extension of metallic structures can be achieved by using prestressed strips for fatigue strengthening. However, the popularization of prestressed strengthening techniques has been limited by lack of versatile analytical methods. In this paper, an analytical method is developed for predicting the fatigue behavior of centrally cracked metal plates after being anchored with prestressed reinforcing strips, based on linear elastic fracture mechanics and the superposition method of stress intensity factors. The force transfer between reinforcing strips and metal cracked plates is modeled using the displacement compatibility principle. The finite-width correction factor for centrally cracked metal plates subjected to four-point concentrated forces is derived, allowing the model to analyze the effect of different anchorage locations on the effectiveness of strengthening. The analytical model is validated through experimental data and finite element analysis. The results show that the model is highly accurate and can be used to analyze how different anchorage locations affect fatigue reinforcement.

Infrequent trigonal crystal system CoNb thin films: investigation of growth behavior, microstructure and magnetic properties

Magnetic films with excellent initial permeability, high resonance frequency, suitable anisotropy fields, and well compatibility are highly desirable for on-chip inductors and transformers. Here, Co90Nb10 thin films with different thicknesses are grown on Si substrates of different orientations using an electron beam evaporation technique. A rare trigonal crystal structure of the CoNb films was observed and was virtually unaffected by substrate orientation. Films grown exhibit thickness-dependent magnetic behavior: coercivity initially decreases and then increases, while the in-plane anisotropy field progressively diminishes. Meanwhile, the initial permeability increases initially before decreasing, and the resonance frequency continuously decreases as the thickness increases. The resultant Co90Nb10/Si (111)-50 nm film displays a high μi of 496 and a great fr of 2.1GHz. The improved magnetic performance originates from the smaller crystallite size, smoother surface roughness, and suitable in-plane anisotropy field. Moreover, the in-plane anisotropy transition to the out-of-plane anisotropy in the Co90Nb10 films whose thickness exceeds 70nm, which is attributed to the growth of the coarse columnar grains once the critical thickness is exceeded. This study demonstrates the correlation between the growth behavior, microstructure, and magnetic properties of CoNb thin films, presenting a new potential for utilizing Co-based thin films in high-frequency applications.

Study of austenite grain growth and recrystallization behavior in pipeline steels containing niobium

Abstract The austenite grain growth and recrystallization behaviors of three pipeline steels with different Nb contents were investigated through reheating and thermal simulation compression experiments. The initiation conditions for dynamic and sub-dynamic recrystallization of austenite were analyzed, and sub-dynamic recrystallization equations in Avrami form were established. The influences of Nb content and deformation conditions on the evolution of grain size during austenite recrystallization was examined. The findings indicate that the austenite grain size of the three steels increases gradually with higher reheating temperatures, while the average grain size decreases with increasing Nb content. Sub-dynamic recrystallization initiation temperatures for the B150-steel, B145-steel, and 73-steel were found to be 920 °C for 10 s, 940 °C for 30 s, and 960 °C for 30 s, respectively. During high-temperature deformation, Nb in solid solution hindered recrystallization by impeding grain boundary and dislocation movement. At lower deformation temperatures, Nb(C, N) precipitation pinned grain boundaries and dislocations and consumed substantial free energy, thus competing with recrystallization. As Nb content increased, strain-induced precipitation became more pronounced, resulting in more effective inhibition of recrystallized grain growth.

Tailored micro-arc oxidation coatings to match with parylene for enhanced tribological performance of Ta-12W alloys

To improve the tribological properties of tantalum-tungsten alloys, dual-layer composite coatings are designed using micro-arc oxidation (MAO) and chemical vapor deposition (CVD) techniques. By adjusting the concentrations of NaOH and NaF additives as well as the oxidation mode (constant current/voltage) of MAO process, the microstructure and properties of underlying MAO layers are tailored for better matching with the top parylene layer, aiming to develop composite coatings capable of service under heavy loads. A comprehensive study is conducted to evaluate the effect of these parameters on the growth, microstructure, bond strength, and mechanical properties of MAO coatings, along with their subsequent impact on the friction and wear behavior under various loads for composite coatings. The findings reveal that increasing the concentration of either NaOH or NaF significantly increases the coating thickness, surface porosity, crystallinity, and hardness of MAO coatings, by promoting the spark discharge activities. However, distinct interfacial growth behavior is observed due to anionic effects caused by OH− and F−. The oxidation mode plays a crucial role in determining the mechanical quality of coatings; the constant voltage mode facilitates dense coatings with high adhesion due to its self-repairing mechanism. Furthermore, wear tests confirm that the enhanced mechanical properties and open-porosity of the MAO coatings markedly improve the tribological performance of composite coatings. This improvement is attributed to the excellent load-bearing capacity provided by hard MAO layers, as well as the anchoring and storage capabilities of the textural porous surfaces. The optimized composite coating demonstrates long-lasting low friction even under heavy loads up to 80 N.

Exploring the mechanisms of benzanilide crystal growth and morphology: Crystal surface structure, solvent diffusion and solvent-interface interactions

Flaky crystals are fragile, rendering them unsuitable for various applications including use, processing, storage and transportation. This work investigates the growth and morphology regulation mechanisms of flaky crystals using benzanilide as a model material. Initially, block-like crystals are prepared by solvent screening and cooling crystallization with its morphology greatly improved. Subsequently, growth kinetics of (111), (1–10) and (020) faces are established with crystal growth experiments. The crystal growth of (001) face is also determined to follow a two-dimensional nucleation model with the microscopic surface analysis using atomic force microscopy. The changes of the surface integration resistance and the growth step height are regarded as kinetic mechanisms of the growth behavior and crystal morphology modulation by solvent and supersaturation. Finally, the molecular mechanism of the modulation of the solvent in crystal morphology is revealed base on crystal surface structure analysis and molecular dynamics simulations. The weak solvent-interface polar interactions facilitate the incorporation of benzanilide molecules into the weak polarity (001) face, leading to the surface roughening and increased crystal thickness when employing strongly polar solvents such as acetonitrile. Unlike the former, the relatively weak hydrogen bonding interactions between solvents and strong polarity (020) face, and the higher diffusion ability of molecules promote the rapid growth and disappearance of (020) face in ethanol and acetonitrile with strong hydrogen bond formation ability. This study can contribute to a deeper understanding of the solvent effect on crystal morphology and provide guidance for optimizing crystallization conditions to obtain shape-tailored crystal products.

Effects of Iron Catalyst Size on the Growth Behavior of Vertical Aligned Carbon Nanotube Arrays

Effects of Iron Catalyst Size on the Growth Behavior of Vertical Aligned Carbon Nanotube Arrays

Rapid prediction of interface morphology and oxygen transportation in crystal growth based on the response surface method

In this paper, a two-dimensional (2D) axisymmetric model subjected to the gas shear effect and thermal Marangoni effect is developed. It is highlighted that the growth conditions of pulling rate, gas flow rate, crucible, and crystal rotation rates play important roles in determining the crystal behaviors of interface morphology and oxygen transportation during the crystal growth process. A Kriging-based response surface method (RSM) is proposed to rapidly predict the crystal growth behaviors, indicating that the outputs of interface morphology and oxygen concentration can be predicted by the corresponding input growth conditions. By global sensitivity analysis, the pulling rate is identified as the key factor in determining the interface morphology, while gas flow rate and crucible rotation rate have a greater effect on oxygen transportation. Furthermore, these two inputs with the highest sensitivities are used to construct the response surface and predict unknown oxygen transportation. When compared with the numerical simulations, the presented model proves to be an effective tool for reducing measurement time and improving accuracy in predicting crystal behaviors. Our findings provide important insights into understanding the crystal growth process under different growth conditions and inspire a data-driven method for crystal growth prediction.

Vertical multilayer structure of MoS2 flakes prepared by thermal evaporative deposition

In this investigation, we explore the synthesis of MoS2 through thermal evaporative deposition, seeking to uncover the growth dynamics and structural evolution of MoS2 under varied experimental conditions. By adjusting the temperature and the carrier gas, this study targets the fabrication of vertical multilayer MoS2 and its growth mode. Our analysis demonstrates that thermal conditions markedly influence flake morphology and dimensions, leading to a notable shift from AA to AB stacking configurations as temperatures rise in the vacuum. Additionally, the application of carrier distinctly modifies growth behaviors, enhancing the uniformity of nucleation sites and the propensity for lateral flake expansion. The insights gained from this research highlight the adaptability and effectiveness of thermal evaporative deposition in producing MoS2, thereby enriching our understanding of the fundamental mechanisms guiding MoS2 synthesis.

Analysis of antibiotic response in Clinical Wound Pseudomonas aeruginosa isolates: Unveiling Proteome Dynamics of tobramycin tolerant phenotype

Pseudomonas aeruginosa (P. aeruginosa) is an opportunistic human pathogen, causing serious chronic infections. P. aeruginosa can adapt efficiently to antibiotic stressors via different genotypic or phenotypic strategies such as resistance and tolerance. The adaptation regulatory system is not always very well understood. In this study, we use shotgun proteomics to investigate the system-level response to tobramycin in two clinical wound P. aeruginosa isolates and PAO1. We profiled each strain for its antibiotic drug-tolerant phenotype using supra-minimum inhibitory concentrations (supra-MIC) of tobramycin and applied proteomics to investigate the protein expression profiles. The MIC revealed that all isolates were susceptible to tobramycin but at supra-MIC concentrations at stationary growth, a degree of tolerance was observed for the isolates. We identified around 40 % of the total proteins encoded by the P. aeruginosa genome and highlighted shared and unique protein signatures for all isolates. Comparative proteome profiling in the absence of antibiotic treatment showed divergent fingerprints, despite similarities in the growth behavior of the isolates. In the presence of tobramycin, the isolates shared a common response in the downregulation of proteins involved in the two-component system, whereas stress response proteins were present at higher levels. Our findings provide insight into the use of proteomic tools to dissect the system-level response in clinical isolates in the absence and presence of antibiotic stress.

Enhanced cross-interfacial growth by thickening transition layers and tailoring grain size of columnar nanotwinned Cu films

Electrodeposited <111>-oriented nanotwinned Cu (NT-Cu) films consist of micron-scale columnar grains and they are thermally stable up to 400 °C. By adding nanoscale equiaxed Cu grains at the bottom of the NT-Cu films, anisotropic large grain growth could be triggered below 200 °C. The grains grew over 50 μm in bonded Cu–Cu films with 5.7 μm thick. Two main factors are identified for the low thermal stability and large grain growth behavior. The grain refining and transition layer thickening are effective to lower the thermal stability of the NT-Cu and reduce the required temperature for recrystallization and grain growth in the NT-Cu film. By increasing the fine-grained layer and refining the grain size of the columnar twinned grains, anisotropic grain growth can occur at 150 °C. The low thermal stability NT-Cu can be employed to completely eliminate the bonding interface at low temperatures in Cu–Cu joints. However, when the fine-grained layer is thicker than a threshold value, normal grain takes place and the bonding interface remains. The mechanism of anisotropic large grain growth was also proposed.

Bojungikki-Tang Augments Pembrolizumab Efficacy in Human PBMC-Injected H460 Tumor-Bearing Mice

Bojungikki-Tang (BJIKT) is traditionally used to enhance digestive function and immunity. It has gained attention as a supplement to chemotherapy or targeted therapy owing to its immune-boosting properties. This study aimed to evaluate the synergistic anti-tumor effects of BJIKT in combination with pembrolizumab in a preclinical model. MHC I/II double knockout NSG mice were humanized with peripheral blood mononuclear cells (PBMCs) and injected subcutaneously with H460 lung tumor cells to establish a humanized tumor model. Both agents were administered to evaluate their impact on tumor growth and immune cell behavior. Immunohistochemistry showed decreased exhaustion markers in CD8(+) and CD4(+) T cells within the tumor, indicating enhanced T cell activity. Additionally, RNA sequencing, transcriptome analysis, and quantitative PCR analysis were performed on tumor tissues to investigate the molecular mechanisms underlying the observed effects. The results confirmed that BJIKT improved T cell function and tumor necrosis factor signaling while suppressing transforming growth factor-β signaling. This modulation led to cell cycle arrest and apoptosis. These findings demonstrate that BJIKT, when combined with pembrolizumab, produces significant anti-tumor effects by altering immune pathways and enhancing the anti-tumor immune response. This study provides valuable insights into the role of BJIKT in the tumor microenvironment and its potential to improve therapeutic outcomes.

Mathematical Model of Fungal Growth with Hyphae Death and Substrate

One of the most crucial subjects in mathematics education is mathematical modeling, which involves connecting situations from the real world to mathematical formulas and vice versa. Our study will focus on how substrate affects fungal growth and lateral branching behaviors, hyphal death, and tip death due to overcrowding. In order to solve a mathematical model, we will employ the system's three-dimensional of equations (PDEs). using numerical solutions, traveling wave theory, stability, and non-dimensionality in our mathematical approach as well as we use trace and determine to find stable states.Computer programs, such as the Maple program and Pdep code in MATLAB, will also be used to aid in the solution process.