Ground State Redox Potentials Research Articles

Isocyanides as Catalytic Electron Acceptors in the Visible Light Promoted Oxidative Formation of Benzyl and Acyl Radicals.

The recent disclosure of the ability of aromatic isocyanides to harvest visible light and act as single electron acceptors when reacting with tertiary aromatic amines has triggered a renewed interest in their application to the development of green photoredox catalytic methodologies. Accordingly, the present work explores their ability to promote the generation of both alkyl and acyl radicals starting from radical precursors such as Hantzsch esters, potassium alkyltrifluoroborates, and α-oxoacids. Mechanistic studies involving UV-visible absorption and fluorescence experiments, electrochemical measurements of the ground-state redox potentials along with computational calculations of both the ground- and the excited-state redox potentials of a set of nine different aromatic isocyanides provided key insights to promote a rationale design of a new generation of isocyanide-based organic photoredox catalysts. Importantly, the green potential of the investigated chemistry has been herein demonstrated by a direct and easy access to deuterium labeled compounds.

Prediction of Redox Power for Photocatalysts: Synergistic Combination of DFT and Machine Learning.

The accurate prediction of excited state properties is a key element of rational photocatalyst design. This involves the prediction of ground and excited state redox potentials, for which an accurate description of electronic structures is needed. Even with highly sophisticated computational approaches, however, a number of difficulties arise from the complexity of excited state redox potentials, as they require the calculation of the corresponding ground state redox potentials and the estimation of the 0-0 transition energies (E0,0). In this study, we have systematically evaluated the performance of DFT methods for these quantities on a set of 37 organic photocatalysts representing 9 different chromophore scaffolds. We have found that the ground state redox potentials can be predicted with reasonable accuracy that can be further improved by rationally minimizing the systematic underestimations. The challenging part is to obtain E0,0, as calculating it directly is highly demanding and its accuracy depends strongly on the DFT functional employed. We have found that approximating E0,0 with appropriately scaled vertical absorption energies offers the best compromise between accuracy and computational effort. An even more accurate and cost-effective approach, however, is to predict E0,0 with machine learning and avoid the use of DFT for excited state calculations. Indeed, the best excited state redox potential predictions are achieved with the combination of M062X for ground state redox potentials and machine learning (ML) for E0,0. With this protocol, the excited state redox potential windows of the photocatalyst frameworks could be adequately predicted. This shows the potential of combining DFT with ML in the computational design of photocatalysts with preferred photochemical properties.

Oxy-Borylenes as Photoreductants: Synthesis and Application in Dehalogenation and Detosylation Reactions.

While the range of accessible borylenes has significantly broadened over the last decade, applications remain limited. Herein, we present tricoordinate oxy-borylenes as potent photoreductants that can be readily activated by visible light. Facile oxidation of CAAC stabilized oxy-borylenes (CAAC)(IPr2 Me2 )BOR (R=TMS, CH2 CH2 C6 H5 , CH2 CH2 (4-F)C6 H4 ) to their corresponding radical cations is achieved with mildly oxidizing ferrocenium ion. Cyclovoltammetric studies reveal ground-state redox potentials of up to -1.90 V vs. Fc+/0 for such oxy-borylenes placing them among the strongest organic super electron donors. Their ability as photoreductants is further supported by theoretical studies and showcased by the application as stoichiometric reagents for the photochemical hydrodehalogenation of aryl chlorides, aryl bromides and unactivated alkyl bromides as well as the detosylation of anilines.

Visible-light-Induced synthesis of imidazolidines through formal [3 + 2] cycloaddition of aromatic imines with N,N,N',N'-tetramethyldiaminomethane

Imidazolidine is a saturated heterocycle with a cyclic aminal core that can be used to develop new pharmacological drugs. Heteroleptic cyclometalated Ir(III) complex photosensitizers have been shown to enable the unprecedented synthesis of imidazolidines through a formal [3 + 2] photocycloaddition of aromatic imines with N,N,N',N'-tetramethyldiaminomethane. Herein, a reaction mechanism based on quenching experiments, quantum yield, ground-state redox potentials, and excited-state potentials is proposed.

Photoinduced Charge Transfer with a Small Driving Force Facilitated by Exciplex-like Complex Formation in Metal-Organic Frameworks.

Photoinduced charge transfer (PCT) is a key step in the light-harvesting (LH) process producing the redox equivalents for energy conversion. However, like traditional macromolecular donor-acceptor assemblies, most MOF-derived LH systems are designed with a large ΔG0 to drive PCT. To emulate the functionality of the reaction center of the natural LH complex that drives PCT within a pair of identical chromophores producing charge carriers with maximum potentials, we prepared two electronically diverse carboxy-terminated zinc porphyrins, BFBP(Zn)-COOH and TFP(Zn)-COOH, and installed them into the hexagonal pores of NU-1000 via solvent-assisted ligand incorporation (SALI), resulting in BFBP(Zn)@NU-1000 and TFP(Zn)@NU-1000 compositions. Varying the number of trifluoromethyl groups at the porphyrin core, we tuned the ground-state redox potentials of the porphyrins within ca. 0.1 V relative to that of NU-1000, defining a small ΔG0 for PCT. For BFBP(Zn)@NU-1000, the relative ground- and excited-state redox potentials of the components facilitate an energy transfer (EnT) from NU-1000* to BFBP(Zn), forming BFBP(Zn)S1* which entails a long-lived charge-separated complex formed through an exciplex-like [BFBP(Zn)S1*-TBAPy] intermediate. Various time-resolved spectroscopic data suggest that EnT from NU-1000* may not involve a fast Förster-like resonance energy transfer (FRET) but rather through a slow [NU-1000*-BFBP(Zn)] intermediate formation. In contrast, TFP(Zn)@NU-1000 displays an efficient EnT from NU-1000* to [TFP(Zn)-TBAPy], a complex that formed at the ground state through electronic interaction, and thereon showed the excited-state feature of [TFP(Zn)-TBAPy]*. The results will help to develop synthetic LHC systems that can produce long-lived photogenerated charge carriers with high potentials, i.e., high open-circuit voltage in photoelectrochemical setups.

Ground-State Redox Potentials Calculations of D-π-A and D-A-π-A Organic Dyes for DSSC and Visible-Light-Driven Hydrogen Production

The prediction of ground-state redox potentials by quantum chemical methods has a prominent role in the rational design of novel organic photosensitizers both for dye-sensitized solar cells (DSSCs) and photocatalytic systems for the production of H2. Indeed, the ground-state redox potential of the photosensitizers is one of the key parameters to identify the most promising candidates for such applications. Here, the ground-state redox potentials of 16 organic donor-π-acceptor D-π-A and donor-acceptor-π-acceptor D-A-π-A dyes having a medium to large size of the conjugated scaffold are evaluated, using the methods of the Density Functional Theory (DFT), in terms of free energy differences between their neutral and oxidized ground-state forms. These results are compared to the available experimental data and to the computed highest occupied molecular orbital energy −ε(HOMO) values as an approximation of ground-state redox potentials according to Koopmans’ theorem. Using the MPW1K functional in combination with the 6-31+G* basis set, the strategy based on the free energy cycle, including solvent effects, reproduces with a good level of accuracy the observed values (mean absolute error (MAE) < 0.2 eV) and trend of redox potentials within related families of dyes. On the other hand, the −ε(HOMO) values are only able to capture the experimental trends in redox potential values.

Electrochemical response of metal complexes in homogeneous solution under photoirradiation.

The electrochemical detection of metal complexes in the photoexcited state is important for understanding photoinduced electron transfer (PET) processes, which play a central role in photo-energy conversion systems. In general, however, the redox potentials of excited states have been indirectly estimated by a combination of spectroscopic properties and ground-state redox potentials. To establish a simple method for directly determining the redox potentials of the photoexcited states of metal complexes, electrochemical measurements under several conditions were performed. The electrochemical response was largely influenced not only by the generation of photoexcited molecules but also by the convection induced by photoirradiation, even when the global temperature of the sample solution was unchanged. The suppression of these unfavourable electrochemical responses was successfully achieved by adopting well-established electrochemical techniques. Furthermore, as an initial demonstration, the photoexcited state of a Ru-based metal complex was directly detected, and its redox potential was determined using a thin layer electrochemical method.

Rigidifying the π-Linker to Enhance Light Absorption of Organic Dye-Sensitized Solar Cells and Influences on Charge Transfer Dynamics

The usage of coplanar π-conjugated segments represents a feasible strategy on reducing the energy gap of organic push–pull dyes for mesoscopic titania solar cells. In this paper, we report two new dyes coded as C254 and C255 with the respective 1,4-di(thiophen-2-yl)benzene and indacenodithiophene π-linkers, in combination with the electron-releasing triphenylamine and electron-withdrawing cyanoacrylic acid units. The energy-gap reduction stemming from the rigidity of the π-linker is accompanied by a negative shift of the ground-state redox potential, which however does not affect the yield of hole injection from the oxidized state of dye molecules to a cobalt redox electrolyte. On the other side, we have identified from femtosecond transient absorption measurements a diminished rate of electron injection from the relaxed, low-energy excited state of C255 to titania, albeit a comparable rate of electron injection from the high-energy excited states of these two dyes. The bulkier C255 dye with four hexyl side chains tethered on the two sp3 carbons of the fused indacenodithiophene unit can form a more compact self-assembling monolayer on titania, considerably attenuating the charge recombination of photoinjected electrons in titania with the cobalt electrolyte and thus enhancing the cell photovoltage and efficiency.

Molecular Electronic Tuning of Photosensitizers to Enhance Photodynamic Therapy: Synthetic Dicyanobacteriochlorins as a Case Study

Photophysical, photostability, electrochemical and molecular-orbital characteristics are analyzed for a set of stable dicyanobacteriochlorins that are promising photosensitizers for photodynamic therapy (PDT). The bacteriochlorins are the parent compound (BC), dicyano derivative (NC)2BC and corresponding zinc (NC)2BC-Zn and palladium chelate (NC)2BC-Pd. The order of PDT activity against HeLa human cancer cells in vitro is (NC)2BC-Pd > (NC)2BC > (NC)2BC-Zn ≈ BC. The near-infrared absorption feature of each dicyanobacteriochlorin is bathochromically shifted 35-50 nm (748-763 nm) from that for BC (713 nm). Intersystem crossing to the PDT-active triplet excited state is essentially quantitative for (NC)2BC-Pd. Phosphorescence from (NC)2BC-Pd occurs at 1122 nm (1.1 eV). This value and the measured ground-state redox potentials fix the triplet excited-state redox properties, which underpin PDT activity via Type-1 (electron transfer) pathways. A perhaps counterintuitive (but readily explicable) result is that of the three dicyanobacteriochlorins, the photosensitizer with the shortest triplet lifetime (7 μs), (NC)2BC-Pd has the highest activity. Photostabilities of the dicyanobacteriochlorins and other bacteriochlorins studied recently are investigated and discussed in terms of four phenomena: aggregation, reduction, oxidation and chemical reaction. Collectively, the results and analysis provide fundamental insights concerning the molecular design of PDT agents.

Synthesis and Application of New Ruthenium Complexes Containingβ-Diketonato Ligands as Sensitizers for Nanocrystalline TiO2Solar Cells

Five heteroleptic ruthenium complexes having differentβ-diketonato ligands, [Ru(tctpy)(dppd)(NCS)] (1), [Ru(tctpy)(pd)(NCS)] (2), [Ru(tctpy)(tdd)(NCS)] (3), [Ru(tctpy)(mepd)(NCS)] (4), and [Ru(tctpy)(tmhd)(NCS)] (5), where tctpy = 4,4′,4′′-tricarboxy-2,2′:6′,2′′-terpyridine, pd = pentane-2,4-dione, mepd = 3-methylpentane-2,4-dione, tmhd = 2,2,6,6-tetramethylheptane-3,5-dione, tdd = tridecane-6,8-dione, and dppd = 1,3-diphenylpropane-1,3-dione, were synthesized and characterized. These heteroleptic complexes exhibit a broad metal-to-ligand charge transfer absorption band over the whole visible range extending up to 950 nm. The low-energy absorption bands and theE (Ru3+/2+) oxidation potentials in these complexes could be tuned to about 15 nm and 110 mV, respectively, by choosing appropriateβ-diketonate ligands. Molecular orbital calculation of complex1shows that the HOMO is localized on the NCS ligand and the LUMO is localized on the tctpy ligand, which is anchored to the TiO2nanoparticles. Theβ-diketonato-ruthenium(II)-polypyridyl sensitizers, when anchored to nanocrystalline TiO2films for light to electrical energy conversion in regenerative photoelectrochemical cells, achieve efficient sensitization to TiO2electrodes with increasing activity in the order5<4<3≈2<1. Under standard AM 1.5 sunlight, the complex1yielded a short-circuit photocurrent density of 16.7 mA/cm2, an open-circuit voltage of 0.58 V, and a fill factor of 0.64, corresponding to an overall conversion efficiency of 6.2%. A systematic tuning of HOMO energy level shows that an efficient sensitizer should possess a ground-state redox potential value of >+.53 V versus SCE.

Chlorin–Bacteriochlorin Energy‐transfer Dyads as Prototypes for Near‐infrared Molecular Imaging Probes: Controlling Charge‐transfer and Fluorescence Properties in Polar Media

The photophysical properties of two energy-transfer dyads that are potential candidates for near-infrared (NIR) imaging probes are investigated as a function of solvent polarity. The dyads (FbC-FbB and ZnC-FbB) contain either a free base (Fb) or zinc (Zn) chlorin (C) as the energy donor and a free base bacteriochlorin (B) as the energy acceptor. The dyads were studied in toluene, chlorobenzene, 1,2-dichlorobenzene, acetone, acetonitrile and dimethylsulfoxide (DMSO). In both dyads, energy transfer from the chlorin to bacteriochlorin occurs with a rate constant of approximately (5-10 ps)(-1) and a yield of >99% in nonpolar and polar media. In toluene, the fluorescence yields (Phif=0.19) and singlet excited-state lifetimes (tau approximately 5.5 ns) are comparable to those of the benchmark bacteriochlorin. The fluorescence yield and excited-state lifetime decrease as the solvent polarity increases, with quenching by intramolecular electron (or hole) transfer being greater for FbC-FbB than for ZnC-FbB in a given solvent. For example, the Phif and tau values for FbC-FbB in acetone are 0.055 and 1.5 ns and in DMSO are 0.019 and 0.28 ns, whereas those for ZnC-FbB in acetone are 0.12 and 4.5 ns and in DMSO are 0.072 and 2.4 ns. The difference in fluorescence properties of the two dyads in a given polar solvent is due to the relative energies of the lowest energy charge-transfer states, as assessed by ground-state redox potentials and supported by molecular-orbital energies derived from density functional theory calculations. Controlling the extent of excited-state quenching in polar media will allow the favorable photophysical properties of the chlorin-bacteriochlorin dyads to be exploited in vivo. These properties include very large Stokes shifts (85 nm for FbC-FbB, 110 nm for ZnC-FbB) between the red-region absorption of the chlorin and the NIR fluorescence of the bacteriochlorin (lambdaf=760 nm), long bacteriochlorin excited-state lifetime (approximately 5.5 ns), and narrow (<or=20 nm) absorption and fluorescence bands. The latter will facilitate selective excitation/detection and multiprobe applications using both intensity- and lifetime-imaging techniques.

Dye Sensitization of Nanocrystalline Titanium Dioxide with Osmium and Ruthenium Polypyridyl Complexes

A series of osmium polypyridyl complexes having various ground-state reduction potentials has been synthesized and used to sensitize nanoporous titanium dioxide electrodes to solar illumination. The spectral response and current vs potential properties of electrodes modified with these dyes have been compared with the behavior of their ruthenium analogues. The trends can be explained by the differences in absorption spectra and ground-state redox potentials. The osmium complexes appear to be promising candidates for further optimization in operating photoelectrochemical cells for solar energy conversion applications. Of the materials studied, all complexes having ground-state redox potentials in methanol more positive than ∼0.4 V vs aqueous SCE were able to sustain oxidation of I-/I3- with a high steady-state quantum yield. For electrodes with very low dye coverages, the open-circuit voltage was mainly determined by the rate of reduction of I2, whereas for high dye coverages, the open-circuit voltage depended on the nature of the complex and on the dye loading level.

Excited State Redox Potentials of Ruthenium Diimine Complexes; Correlations with Ground State Redox Potentials and Ligand Parameters

Excited State Redox Potentials of Ruthenium Diimine Complexes; Correlations with Ground State Redox Potentials and Ligand Parameters

Polyoxometalate systems for the catalytic selective production of nonthermodynamic alkenes from alkanes. Nature of excited-state deactivation processes and control of subsequent thermal processes in polyoxometalate photoredox chemistry

The photooxidations of exemplary branched acyclic alkanes and cycloalkanes by a range of polyoxotungstates varying in charge density, ground-state redox potential, acidity, and other properties were examined in detail. The organic products generated in these reactions depend on the polyoxometalate used, and in particular on the ground-state redox potential of the complex. Under anaerobic conditions acyclic branched alkanes yield principally alkenes, while cycloalkanes yield principally alkenes and dimers. Alkyl methyl ketones, derived in part from reaction with acetonitrile solvent, and isomerized alkanes are produced with some alkane substrates. Under aerobic conditions, autoxidation, initiated by radicals generated in the photoinduced redox chemistry, is observed. Under aerobic conditions the polyoxotungstates with formal redox potentials more negative than {minus}1.0 V vs Ag/AgNO{sub 3}(CH{sub 3}CN), such as W{sub 10}O{sub 32}{sup 4{minus}} and W{sub 6}O{sub 19}{sup 2{minus}}, photochemically dehydrogenate branched acyclic alkanes in high selectivity to {alpha}-olefins and the least substituted alkenes, products heretofore undocumented in photooxidation reactions catalyzed by polyoxometalates.