GH11 Xylanase Research Articles

GH11 xylanase from Aspergillus tamarii Kita: Purification by one-step chromatography and xylooligosaccharides hydrolysis monitored in real-time by mass spectrometry

The present study describes the one-step purification and biochemical characterization of an endo-1,4-β-xylanase from Aspergillus tamarii Kita. Extracellular xylanase was purified to homogeneity 7.43-fold through CM-cellulose. Enzyme molecular weight and pI were estimated to be 19.5kDa and 8.5, respectively. The highest activity of the xylanase was obtained at 60°C and it was active over a broad pH range (4.0–9.0), with maximal activity at pH 5.5. The enzyme was thermostable at 50°C, retaining more than 70% of its initial activity for 480min. The K0.5 and Vmax values on beechwood xylan were 8.13mg/mL and 1,330.20μmol/min/mg of protein, respectively. The ions Ba2+ and Ni2+, and the compounds β-mercaptoethanol and DTT enhanced xylanase activity, while the heavy metals (Co2+, Cu2+, Hg+, Pb2+ and Zn2+) strongly inhibited the enzyme, at 5mM. Enzymatic hydrolysis of xylooligosaccharides monitored in real-time by mass spectrometer showed that the shortest xylooligosaccharide more efficiently hydrolyzed by A. tamarii Kita xylanase corresponded to xylopentaose. In agreement, HPLC analyzes did not detect xylopentaose among the hydrolysis products of xylan. Therefore, this novel GH11 endo-xylanase displays a series of physicochemical properties favorable to its application in the food, feed, pharmaceutical and paper industries.

The effect of a lytic polysaccharide monooxygenase and a xylanase from Gloeophyllum trabeum on the enzymatic hydrolysis of lignocellulosic residues using a commercial cellulase.

Hydrolysis of lignocellulosic biomass depends on the concerted actions of cellulases and accessory proteins. In this work we examined the combined action of two auxiliary proteins from the brown rot fungus Gloeophyllum trabeum: a family AA9 lytic polysaccharide monooxygenase (GtLPMO) and a GH10 xylanase (GtXyn10A). The enzymes were produced in the heterologous host Pichia pastoris. In the presence of an electron source, GtLPMO increased the activity of a commercial cellulase on filter paper, and the xylanase activity of GtXyn10A on beechwood xylan. Mixtures of GtLPMO, GtXyn10A and Celluclast 1.5L were used for hydrolysis of pretreated wheat straw. Results showed that a mixture of 60% Celluclast 1.5L, 20% GtXyn10A and 20% GtLPMO increased total reducing sugar production by 54%, while the conversions of glucan to glucose and xylan to xylose were increased by 40 and 57%, respectively. This suggests that GtLPMO can contribute to lignocellulose hydrolysis, not only by oxidative activity on glycosidic bonds, but also to hemicellulose through the oxidation of xylosyl bonds in xylan. The concerted action of these auxiliary enzymes may significantly improve large-scale recovery of sugars from lignocellulose.

A novel GH10 xylanase from Penicillium sp. accelerates saccharification of alkaline-pretreated bagasse by an enzyme from recombinant Trichoderma reesei expressing Aspergillus \u03b2-glucosidase

BackgroundTrichoderma reesei is considered a candidate fungal enzyme producer for the economic saccharification of cellulosic biomass. However, performance of the saccharifying enzymes produced by T. reesei is insufficient. Therefore, many attempts have been made to improve its performance by heterologous protein expression. In this study, to increase the conversion efficiency of alkaline-pretreated bagasse to sugars, we conducted screening of biomass-degrading enzymes that showed synergistic effects with enzyme preparations produced by recombinant T. reesei.ResultsPenicillium sp. strain KSM-F532 produced the most effective enzyme to promote the saccharification of alkaline-pretreated bagasse. Biomass-degrading enzymes from strain KSM-F532 were fractionated and analyzed, and a xylanase, named PspXyn10, was identified. The amino acid sequence of PspXyn10 was determined by cDNA analysis: the enzyme shows a modular structure consisting of glycoside hydrolase family 10 (GH10) and carbohydrate-binding module family 1 (CBM1) domains. Purified PspXyn10 was prepared from the supernatant of a recombinant T. reesei strain. The molecular weight of PspXyn10 was estimated to be 55 kDa, and its optimal temperature and pH for xylanase activity were 75 °C and pH 4.5, respectively. More than 80% of the xylanase activity was maintained at 65 °C for 10 min. With beechwood xylan as the substrate, the enzyme had a Km of 2.2 mg/mL and a Vmax of 332 μmol/min/mg. PspXyn10ΔCBM, which lacked the CBM1 domain, was prepared by limited proteolysis. PspXyn10ΔCBM showed increased activity against soluble xylan, but decreased saccharification efficiency of alkaline-pretreated bagasse. This result indicated that the CBM1 domain of PspXyn10 contributes to the enhancement of the saccharification efficiency of alkaline-pretreated bagasse. A recombinant T. reesei strain, named X2PX10, was constructed from strain X3AB1. X3AB1 is an Aspergillus aculeatus β-glucosidase-expressing T. reesei PC-3-7. X2PX10 also expressed PspXyn10 under the control of the xyn2 promoter. An enzyme preparation from X2PX10 showed almost the same saccharification efficiency of alkaline-pretreated bagasse at half the enzyme dosage as that used for an enzyme preparation from X3AB1.ConclusionsOur results suggest that PspXyn10 promotes the saccharification of alkaline-pretreated bagasse more efficiently than TrXyn3, a GH10 family xylanase from T. reesei, and that the PspXyn10-expressing strain is suitable for enzyme production for biomass saccharification.

Structural insights of RmXyn10A – A prebiotic-producing GH10 xylanase with a non-conserved aglycone binding region

Hydrolysis of arabinoxylan (AX) by glycoside hydrolase family 10 (GH10) xylanases produces xylo- and arabinoxylo-oligosaccharides ((A)XOS) which have shown prebiotic effects. The thermostable GH10 xylanase RmXyn10A has shown great potential to produce (A)XOS. In this study, the structure of RmXyn10A was investigated, the catalytic module by homology modelling and site-directed mutagenesis and the arrangement of its five domains by small-angle X-ray scattering (SAXS). Substrate specificity was explored in silico by manual docking and molecular dynamic simulations. It has been shown in the literature that the glycone subsites of GH10 xylanases are well conserved and our results suggest that RmXyn10A is no exception. The aglycone subsites are less investigated, and the modelled structure of RmXyn10A suggests that loop β6α6 in the aglycone part of the active site contains a non-conserved α-helix, which blocks the otherwise conserved space of subsite +2. This structural feature has only been observed for one other GH10 xylanase. In RmXyn10A, docking revealed two alternative binding regions, one on either side of the α-helix. However, only one was able to accommodate arabinose-substitutions and the mutation study suggests that the same region is responsible for binding XOS. Several non-conserved structural features are most likely to be responsible for providing affinity for arabinose-substitutions in subsites +1 and +2. The SAXS rigid model of the modular arrangement of RmXyn10A displays the catalytic module close to the cell-anchoring domain while the carbohydrate binding modules are further away, likely explaining the observed lack of contribution of the CBMs to activity.

Combined genome and transcriptome sequencing to investigate the plant cell wall degrading enzyme system in the thermophilic fungus Malbranchea cinnamomea

BackgroundGenome and transcriptome sequencing has greatly facilitated the understanding of biomass-degrading mechanisms in a number of fungal species. The information obtained enables the investigation and discovery of genes encoding proteins involved in plant cell wall degradation, which are crucial for saccharification of lignocellulosic biomass in second-generation biorefinery applications. The thermophilic fungus Malbranchea cinnamomea is an efficient producer of many industrially relevant enzymes and a detailed analysis of its genomic content will considerably enhance our understanding of its lignocellulolytic system and promote the discovery of novel proteins.ResultsThe 25-million-base-pair genome of M. cinnamomea FCH 10.5 was sequenced with 225× coverage. A total of 9437 protein-coding genes were predicted and annotated, among which 301 carbohydrate-active enzyme (CAZyme) domains were found. The putative CAZymes of M. cinnamomea cover cellulases, hemicellulases, chitinases and pectinases, equipping the fungus with the ability to grow on a wide variety of biomass types. Upregulation of 438 and 150 genes during growth on wheat bran and xylan, respectively, in comparison to growth on glucose was revealed. Among the most highly upregulated CAZymes on xylan were glycoside hydrolase family GH10 and GH11 xylanases, as well as a putative glucuronoyl esterase and a putative lytic polysaccharide monooxygenase (LPMO). AA9-domain-containing proteins were also found to be upregulated on wheat bran, as well as a putative cutinase and a protein harbouring a CBM9 domain. Several genes encoding secreted proteins of unknown function were also more abundant on wheat bran and xylan than on glucose.ConclusionsThe comprehensive combined genome and transcriptome analysis of M. cinnamomea provides a detailed insight into its response to growth on different types of biomass. In addition, the study facilitates the further exploration and exploitation of the repertoire of industrially relevant lignocellulolytic enzymes of this fungus.

Thermostability improvement of a Talaromyces leycettanus xylanase by rational protein engineering

Thermophilic xylanases with high catalytic efficiency are of great interest in the biofuel, food and feed industries. This study identified a GH11 xylanase gene, Tlxyn11B, in Talaromyces leycettanus JCM12802. Recombinant TlXyn11B produced in Pichia pastoris is distinguished by high specific activity (8259 ± 32 U/mg with beechwood xylan as substrate) and excellent pH stability (from 1.0 to 10.5). The beechwood xylan hydrolysates consisted mainly of xylobiose, xylotriose and xylotetraose, thus TlXyn11B could be used for the production of prebiotic xylooligosaccharide. By using the structure-based rational approach, the N-terminal sequence of TlXyn11B was modified for thermostability improvement. Mutants S3F and S3F/D35V/I/Q/M had elevated Tm values of 60.01 to 67.84 °C, with S3F/D35I the greatest. Homology modeling and molecular dynamics (MD) simulation analysis revealed that the substituted F3 and I35 formed a sandwich structure with S45 and T47, which may enhance the overall structure rigidity with lowered RMSD values. This study verifies the efficiency of rational approach in thermostability improvement and provides a xylanase candidate of GH11 with great commercialization potential.

Insights into the roles of non-catalytic residues in the active site of a GH10 xylanase with activity on cellulose

Bifunctional glycoside hydrolases have potential for cost-savings in enzymatic decomposition of plant cell wall polysaccharides for biofuels and bio-based chemicals. The N-terminal GH10 domain of a bifunctional multimodular enzyme CbXyn10C/Cel48B from Caldicellulosiruptor bescii is an enzyme able to degrade xylan and cellulose simultaneously. However, the molecular mechanism underlying its substrate promiscuity has not been elucidated. Herein, we discovered that the binding cleft of CbXyn10C would have at least six sugar-binding subsites by using isothermal titration calorimetry analysis of the inactive E140Q/E248Q mutant with xylo- and cello-oligosaccharides. This was confirmed by determining the catalytic efficiency of the wild-type enzyme on these oligosaccharides. The free form and complex structures of CbXyn10C with xylose- or glucose-configured oligosaccharide ligands were further obtained by crystallographic analysis and molecular modeling and docking. CbXyn10C was found to have a typical (β/α)8-TIM barrel fold and "salad-bowl" shape of GH10 enzymes. In complex structures with xylo-oligosaccharides, seven sugar-binding subsites were found, and many residues responsible for substrate interactions were identified. Site-directed mutagenesis indicated that 6 and 10 amino acid residues were key residues for xylan and cellulose hydrolysis, respectively. The most important residues are centered on subsites -2 and -1 near the cleavage site, whereas residues playing moderate roles could be located at more distal regions of the binding cleft. Manipulating the residues interacting with substrates in the distal regions directly or indirectly improved the activity of CbXyn10C on xylan and cellulose. Most of the key residues for cellulase activity are conserved across GH10 xylanases. Revisiting randomly selected GH10 enzymes revealed unreported cellulase activity, indicating that the dual function may be a more common phenomenon than has been expected.

Improvement of the catalytic characteristics of a salt-tolerant GH10 xylanase from Streptomyce rochei L10904

A GH10 xylanase Srxyn10 from Streptomyce rochei L10904, and its truncated derivative, Srxyn10M, were investigated. Both displayed great salt-tolerant ability, retaining more than 95% and 91% activity after incubation at 37°C for 1h in 3.0M and 5.0M NaCl, respectively. They exhibited a special hydrolytic property of forming xylobiose as the major product and produced fewer xylose compounds when combined with a reported xylanase while digesting corncob xylans. The mutant, Srxyn10M, was constructed from Srxyn10 by deleting the C-terminal carbohydrate-binding module. It possessed a 3.26-fold higher specific activity on beechwood xylan than Srxyn10. Moreover, Srxyn10M showed greater substrate affinity and catalytic efficiency than Srxyn10 when beechwood xylan, birchwood xylan, and oat-spelt xylan were used as substrates. The thermostability was also greatly improved. Therefore, the application potential was markedly enhanced by the improvement of these properties.

Extraction of Glucuronoarabinoxylan from Quinoa Stalks (Chenopodium quinoa Willd.) and Evaluation of Xylooligosaccharides Produced by GH10 and GH11 Xylanases

Byproducts from quinoa are not yet well explored sources of hemicellulose or products thereof. In this work, xylan from milled quinoa stalks was retrieved to 66% recovery by akaline extraction using 0.5 M NaOH at 80 °C, followed by ethanol precipitation. The isolated polymer eluted as a single peak in size-exclusion chromatography with a molecular weight of >700 kDa. Analysis by Fourier transform infrared spectroscopy and nuclear magnetic resonance (NMR) combined with acid hydrolysis to monomers showed that the polymer was built of a backbone of β(1 → 4)-linked xylose residues that were substituted by 4-O-methylglucuronic acids, arabinose, and galactose in an approximate molar ratio of 114:23:5:1. NMR analysis also indicated the presence of α(1 → 5)-linked arabinose substituents in dimeric or oligomeric forms. The main xylooligosaccharides (XOs) produced after hydrolysis of the extracted glucuronoarabinoxylan polymer by thermostable glycoside hydrolases (GHs) from families 10 and 11 were xylobiose and xylotriose, followed by peaks of putative substituted XOs. Quantification of the unsubstituted XOs using standards showed that the highest yield from the soluble glucuronoarabinoxylan fraction was 1.26 g/100 g of xylan fraction, only slightly higher than the yield (1.00 g/100 g of xylan fraction) from the insoluble fraction (p < 0.05). No difference in yield was found between reactions in buffer or water (p > 0.05). This study shows that quinoa stalks represent a novel source of glucuronoarabinoxylan, with a substituent structure that allowed for limited production of XOs by GH10 or GH11 enzymes.

Identification of endoxylanase XynE from Clostridium thermocellum as the first xylanase of glycoside hydrolase family GH141

Enzymes that cleave polysaccharides in lignocellulose, i. e., cellulases, xylanases, and accessory enzymes, play crucial roles in the natural decomposition of plant-derived biomass and its efficient and sustainable processing into biofuels or other bulk chemicals. The analysis of open reading frame cthe_2195 from the thermophilic, cellulolytic anaerobe Clostridium thermocellum (also known as ‘Ruminiclostridium thermocellum’) suggested that it encoded a cellulosomal protein comprising a dockerin-I module, a carbohydrate-binding module, and a module of previously unknown function. The biochemical characterisation upon recombinant expression in Escherichia coli revealed that the protein is a thermostable endoxylanase, named Xyn141E with an optimal pH of 6.0–6.5 and a temperature optimum of 67–75 °C. The substrate spectrum of Xyn141E resembles that of GH10 xylanases, because of its side activities on carboxymethyl cellulose, barley β-glucan, and mannan. Conversely, the product spectrum of Xyn141E acting on arabinoxylan is similar to those of GH11, as established by HPAEC-PAD analysis. Xyn141E is weakly related (20.7% amino acid sequence identity) to the founding member of the recently established GH family 141 and is the first xylanase in this new family of biomass-degrading enzymes.

Molecular and biochemical characterization of a novel cold-active and metal ion-tolerant GH10 xylanase from frozen soil

ABSTRACTA novel xylanase gene of family 10 (xyn27) was obtained from the genomic DNA of frozen soil of Daxinganling in China by Touch-down polymerase chain reaction (PCR) and thermal asymmetric interlaced (TAIL) PCR methods. Xyn27 contained a putative signal peptide (20 residues) and a catalytic motif of GH10 (327 residues) and shared the highest similarity (83%) with the reported GH10 xylanase (XM_003662144). The recombinant xyn27 was successfully expressed in Pichia pastoris GS115 and the optimal induction condition was 30 °C for 48 h. Xyn27 was demonstrated to be a cold-active xylanase, which shows its highest activity at 35 °C and still had 60.25%, 38.70% and 10.8% relative activity at 20 °C, 10 °C and 0 °C. Further analysis showed that Xyn27 has fewer arginine and more alanine residues compared with its mesophilic or thermophilic counterparts. The optimal pH of Xyn27 was 7.0, and it was stable after incubating under the pH range from 3.0 to 9.0 for 1 h. Besides, Xyn27 exhibited superior metal ion tolerance than other GH10 cold-active xylanases, being tolerant to most metal ions and organic solvents, and significantly enhanced by Ca2+, Mn2+ and Zn2+ metal ions. In addition, the Km, Vmax, kcat and kcat Km−1 against beechwood xylan were 13.42 mg mL−1, 9.07 μmol min−1 mg−1, 192.98 min−1 and 14.38 mL min−1 mg−1, and Xyn27 could completely degrade xylan into xylobiose. The features of cold activity and metal-ion tolerance suggested that xylanase Xyn27 could have potential application in basic research and various industries like food possessing.

A novel transcription factor specifically regulates GH11 xylanase genes in Trichoderma reesei

BackgroundThe filamentous fungus Trichoderma reesei is widely utilized in industry for cellulase production, but its xylanase activity must be improved to enhance the accessibility of lignocellulose to cellulases. Several transcription factors play important roles in this progress; however, nearly all the reported transcription factors typically target both cellulase and hemi-cellulase genes. Specific xylanase transcription factor would be useful to regulate xylanase activity directly.ResultsIn this study, a novel zinc binuclear cluster transcription factor (jgi|Trire2|123881) was found to repress xylanase activity, but not cellulase activity, and was designated as SxlR (specialized xylanase regulator). Further investigations using real-time PCR and an electrophoretic mobility shift assay demonstrated that SxlR might bind the promoters of GH11 xylanase genes (xyn1, xyn2, and xyn5), but not those of GH10 (xyn3) and GH30 (xyn4) xylanase genes, and thus regulate their transcription and expression directly. We also identified the binding consensus sequence of SxlR as 5′- CATCSGSWCWMSA-3′. The deletion of SxlR in T. reesei RUT-C30 to generate the mutant ∆sxlr strain resulted in higher xylanase activity as well as higher hydrolytic efficiency on pretreated rice straw.ConclusionsOur study characterizes a novel specific transcriptional repressor of GH11 xylanase genes, which adds to our understanding of the regulatory system for the synthesis and secretion of cellulase and hemi-cellulase in T. reesei. The deletion of SxlR may also help to improve the hydrolytic efficiency of T. reesei for lignocellulose degradation by increasing the xylanase-to-cellulase ratio.

Production of GH11 xylanase for bakery industry by solid state fermentation

Production of GH11 xylanase for bakery industry by solid state fermentation

Site-directed mutagenesis of GH10 xylanase A from Penicillium canescens for determining factors affecting the enzyme thermostability

In order to investigate factors affecting the thermostability of GH10 xylanase A from Penicillium canescens (PcXylA) and to obtain its more stable variant, the wild-type (wt) enzyme and its mutant forms, carrying single amino acid substitutions, were cloned and expressed in Penicillium verruculosum B1-537 (niaD-) auxotrophic strain under the control of the cbh1 gene promoter. The recombinant PcXylA-wt and I6V, I6L, L18F, N77D, Y125R, H191R, S246P, A293P mutants were successfully expressed and purified for characterization. The mutations did not affect the enzyme specific activity against xylan from wheat as well as its pH-optimum of activity. One mutant (L18F) displayed a higher thermostability relative to the wild-type enzyme; its half-life time at 50–60°C was 2–2.5–fold longer than that for the PcXylA-wt, and the melting temperature was 60.0 and 56.1°C, respectively. Most of other mutations led to decrease in the enzyme thermostability. This study, together with data of other researchers, suggests that multiple mutations should be introduced into GH10 xylanases in order to dramatically improve their stability.

Two Distinct α-l-Arabinofuranosidases in Caldicellulosiruptor Species Drive Degradation of Arabinose-Based Polysaccharides.

Species in the extremely thermophilic genus Caldicellulosiruptor can degrade unpretreated plant biomass through the action of multimodular glycoside hydrolases. To date, most focus with these bacteria has been on hydrolysis of glucans and xylans, while the biodegradation mechanism for arabinose-based polysaccharides remains unclear. Here, putative α-l-arabinofuranosidases (AbFs) were identified in Caldicellulosiruptor species by homology to less-thermophilic versions of these enzymes. From this screen, an extracellular XynF was determined to be a key factor in hydrolyzing α-1,2-, α-1,3-, and α-1,5-l-arabinofuranosyl residues of arabinose-based polysaccharides. Combined with a GH11 xylanase (XynA), XynF increased arabinoxylan hydrolysis more than 6-fold compared to the level seen with XynA alone, likely the result of XynF removing arabinofuranosyl side chains to generate linear xylans that were readily degraded. A second AbF, the intracellular AbF51, preferentially cleaved the α-1,5-l-arabinofuranosyl glycoside bonds within sugar beet arabinan. β-Xylosidases, such as GH39 Xyl39B, facilitated the hydrolysis of arabinofuranosyl residues at the nonreducing terminus of the arabinose-branched xylo-oligosaccharides by AbF51. These results demonstrate the separate but complementary contributions of extracellular XynF and cytosolic AbF51 in processing the bioconversion of arabinose-containing oligosaccharides to fermentable monosaccharides.IMPORTANCE Degradation of hemicellulose, due to its complex chemical structure, presents a major challenge during bioconversion of lignocellulosic biomass to biobased fuels and chemicals. Degradation of arabinose-containing polysaccharides, in particular, can be a key bottleneck in this process. Among Caldicellulosiruptor species, the multimodular arabinofuranosidase XynF is present in only selected members of this genus. This enzyme exhibited high hydrolysis activity, broad specificity, and strong synergism with other hemicellulases acting on arabino-polysaccharides. An intracellular arabinofuranosidase, AbF51, occurs in all Caldicellulosiruptor species and, in conjunction with xylosidases, processes the bioconversion of arabinose-branched oligosaccharides to fermentable monosaccharides. Taken together, the data suggest that plant biomass degradation in Caldicellulosiruptor species involves extracellular XynF that acts synergistically with other hemicellulases to digest arabino-polysaccharides that are subsequently transported and degraded further by intracellular AbF51 to produce short-chain arabino sugars.

Improving the thermostability of a fungal GH11 xylanase via site-directed mutagenesis guided by sequence and structural analysis

BackgroundXylanases have been widely employed in many industrial processes, and thermophilic xylanases are in great demand for meeting the high-temperature requirements of biotechnological treatments. In this work, we aim to improve the thermostability of XynCDBFV, a glycoside hydrolase (GH) family 11 xylanase from the ruminal fungus Neocallimastix patriciarum, by site-directed mutagenesis. We report favorable mutations at the C-terminus from B-factor comparison and multiple sequence alignment.ResultsC-terminal residues 207-NGGA-210 in XynCDBFV were discovered to exhibit pronounced flexibility based on comparison of normalized B-factors. Multiple sequence alignment revealed that beneficial residues 207-SSGS-210 are highly conserved in GH11 xylanases. Thus, a recombinant xylanase, Xyn-MUT, was constructed by substituting three residues (N207S, G208S, A210S) at the C-terminus of XynCDBFV. Xyn-MUT exhibited higher thermostability than XynCDBFV at ≥70 °C. Xyn-MUT showed promising improvement in residual activity with a thermal retention of 14% compared to that of XynCDBFV after 1 h incubation at 80 °C; Xyn-MUT maintained around 50% of the maximal activity after incubation at 95 °C for 1 h. Kinetic measurements showed that the recombinant Xyn-MUT had greater kinetic efficiency than XynCDBFV (Km, 0.22 and 0.59 µM, respectively). Catalytic efficiency values (kcat/Km) of Xyn-MUT also increased (1.64-fold) compared to that of XynCDBFV. Molecular dynamics simulations were performed to explore the improved catalytic efficiency and thermostability: (1) the substrate-binding cleft of Xyn-MUT prefers to open to a larger extent to allow substrate access to the active site residues, and (2) hydrogen bond pairs S208-N205 and S210-A55 in Xyn-MUT contribute significantly to the improved thermostability. In addition, three xylanases with single point mutations were tested, and temperature assays verified that the substituted residues S208 and S210 give rise to the improved thermostability.ConclusionsThis is the first report for GH11 recombinant with improved thermostability based on C-terminus replacement. The resulting Xyn-MUT will be an attractive candidate for industrial applications.

Refolding the unfoldable: A systematic approach for renaturation of Bacillus circulans xylanase.

Xylanases are important polysaccharide-cleaving catalysts for the pulp and paper, animal feeds and biofuels industries. They have also proved to be valuable model systems for understanding enzymatic catalysis, with one of the best studied being the GH11 xylanase from Bacillus circulans (Bcx). However, proteins from this class are very recalcitrant to refolding in vitro. This both limits their high level expression in heterologous hosts, and prevents experimental approaches, such as peptide ligation or chemical modifications, to probe and engineer their stability and function. To solve this problem, a systematic screening approach was employed to identify suitable buffer conditions for renaturing Bcx in vitro. The fractional factorial screen employed identified starting conditions for refolding, which were then refined and developed into a generic protocol for renaturing preparative amounts of active Bcx in a 50-60% yield from inclusion bodies. The method is robust and proved equally proficient at refolding circularly permuted versions that carry cysteine mutations. This general approach should be applicable to related GH11 xylanases, as well as proteins adopting a similar β-jellyroll fold, that are otherwise recalcitrant to refolding in vitro.

Characterization of the Wild-Type and Truncated Forms of a Neutral GH10 Xylanase from Coprinus cinereus: Roles of C-Terminal Basic Amino Acid-Rich Extension in Its SDS Resistance, Thermostability, and Activity.

A neutral xylanase (CcXyn) was identified from Coprinus cinereus. It has a single GH10 catalytic domain with a basic amino acid-rich extension (PVRRK) at the C-terminus. In this study, the wild-type (CcXyn) and C-terminus-truncated xylanase (CcXyn-Δ5C) were heterologously expressed in Pichia pastoris and their characteristics were comparatively analyzed with aims to examine the effect of this extension on the enzyme function. The circular dichorism analysis indicated that both enzymes in general had a similar structure, but CcXyn-Δ5C contained less α-helices (42.9%) and more random coil contents (35.5%) than CcXyn (47.0% and 32.8%, respectively). Both enzymes had the same pH (7.0) and temperature (45°C) optima, and similar substrate specificity on different xylans. They all hydrolyzed beechwood xylan primarily to xylobiose and xylotriose. The amounts of xylobiose and xylotriose accounted for 91.5% and 92.2% (w/w) of total xylooligosaccharides (XOS) generated from beechwood by CcXyn and CcXyn-Δ5C, respectively. However, truncation of the C-terminal 5-amino-acids extension significantly improved the thermostability, SDS resistance, and pH stability at pH 6.0-9.0. Furthermore, CcXyn-Δ5C exhibited a much lower Km value than CcXyn (0.27 mg/ml vs 0.83 mg/ml), and therefore, the catalytic efficiency of CcXyn-Δ5C was 2.4-times higher than that of CcXyn. These properties make CcXyn-Δ5C a good model for the structure-function study of (α/β)8-barrel-folded enzymes and a promising candidate for various applications, especially in the detergent industry and XOS production.

Characterization of the arabinoxylan-degrading machinery of the thermophilic bacterium Herbinix hemicellulosilytica—Six new xylanases, three arabinofuranosidases and one xylosidase

Herbinix hemicellulosilytica is a newly isolated, gram-positive, anaerobic bacterium with extensive hemicellulose-degrading capabilities obtained from a thermophilic biogas reactor. In order to exploit its potential as a source for new industrial arabinoxylan-degrading enzymes, six new thermophilic xylanases, four from glycoside hydrolase family 10 (GH10) and two from GH11, three arabinofuranosidases (1x GH43, 2x GH51) and one β-xylosidase (GH43) were selected. The recombinantly produced enzymes were purified and characterized. All enzymes were active on different xylan-based polysaccharides and most of them showed temperature-vs-activity profiles with maxima around 55–65°C. HPAEC-PAD analysis of the hydrolysates of wheat arabinoxylan and of various purified xylooligosaccharides (XOS) and arabinoxylooligosaccharides (AXOS) was used to investigate their substrate and product specificities: among the GH10 xylanases, XynB showed a different product pattern when hydrolysing AXOS compared to XynA, XynC, and XynD. None of the GH11 xylanases was able to degrade any of the tested AXOS. All three arabinofuranosidases, ArfA, ArfB and ArfC, were classified as type AXH-m,d enzymes. None of the arabinofuranosidases was able to degrade the double-arabinosylated xylooligosaccharides XA2+3XX. β-Xylosidase XylA (GH43) was able to degrade unsubstituted XOS, but showed limited activity to degrade AXOS.

Functional characterization of three GH10 xylanases

Decreased availability of fossil fuels has driven an increased demand for sustainable energy sources such as biofuels. One area of bioenergy research involves development of biocatalysts able to efficiently degrade biomass “waste”‐products, such as substrates derived from corn stover, rather than easily‐fermentable biomass used for food, such as starch from corn kernels. Xylanases are of interest for their ability to hydrolyze hemicellulosic sugars found in plant cell walls, allowing utilization of waste‐derived biomass. In this study, three xylanases of glycoside hydrolase family 10 (GH10) are functionally characterized and optimized for temperature and pH, as well as kinetically analyzed for xylose monomer and oligomer production. These enzymes, GH10‐4, GH10‐9, and GH10‐15, demonstrate activity upon substrates xylan and arabinoxylan. For GH10‐4, optima are 50°C at pH 8 on xylan and 45°C at pH 8 on arabinoxylan. For GH10‐9, optima are 70°C at pH 5 on xylan and 70°C at pH 5 on arabinoxylan. For GH10‐15, optima are 50°C at pH 8 on xylan and 45°C at pH 5 on arabinoxylan. Kinetic analysis reveals GH10‐4 produces xylose (X1), xylobiose (X2), xylotriose (X3), xylotetraose (X4), and xylopentaose (X5) from xylan, while GH10‐9 and GH10‐15 produce X1, X2, and X3. From arabinoxylan, GH10‐4 produces X1, X2, X3, X4, while GH10‐9 and GH10‐15 produce X1, X2, X3. Conclusive kinetic data may suggest applicability of these enzymes for industrial use within biocatalysts and contribute further insight to the functionality of enzymes within GH10.Support or Funding InformationThe authors are grateful for financial support by the Integrated Biological Sciences Summer Research Program (IBS‐SRP, NSF) at the University of Wisconsin‐Madison and the Great Lakes Bioenergy Research Center (GLBRC) of the U.S. Department of Energy. Presentation travel support is provided by the Ronald E. McNair Scholars Program of Winthrop University. The authors also thank Lai Bergeman, Craig Bingman, Bob Smith, Emily Beebe, Kirk Vander Meulen, Amber Smith, David Wassarman, and John Greenler for professional support.