Franz Cell Research Articles

Novel tip-loaded dissolving and implantable microneedle array patches for sustained release of finasteride

Finasteride (FND) is a competitive inhibitor of 5α-reductase, an enzyme involved in benign prostatic hyperplasia (BPH) and androgenic alopecia. FND is administered in oral, often lifelong treatments, increasing the pill burden of polymedicated patients. Microneedle array patches (MAPs) are minimally invasive devices that painlessly pierce the outermost layers of the skin, forming slowly-dissolving drug depots in the dermis, which can release drugs over weeks or months, making this platform an attractive, patient-friendly option for long-term treatments. This work describes the development of long-acting dissolving and implantable PLGA MAPs aimed for systemic release of FND for at least two weeks. Mechanically strong tip-loaded MAPs with pyramidal geometry were obtained using micromoulding methodology. In vitro studies revealed that the dissolving and implantable MAPs were able to release the drug for over 7 and 14 days, respectively. Skin deposition experiments in Franz cells demonstrated that after 24 h, dissolving and implantable MAPs were able to deposit 629.00 ± 214.54 μg and 1861.64 ± 383.30 μg of FND in the skin, respectively. On the other hand, transdermal permeation studies showed that both formulations produced a slow release of the drug to the receptor compartment of the Franz cells, with dissolving and implantable MAPs releasing 90.43 ± 6.20 μg and 27.80 ± 3.94 μg of FND after 24 h. The formulations described here could be an alternative to current oral treatments, having the potential to deliver the drug for extended periods, simplifying the treatment of BPH and androgenic alopecia.

Novel amorphous solid dispersion based on natural deep eutectic solvent for enhancing delivery of anti-tumor RA-XII by oral administration in rats

At present, oral chemotherapy showing the advantages of non-invasiveness, convenience, and high patient compliance, is gradually replacing traditional intravenous chemotherapy to treat patients with cancer. RA-XII, a unique natural cyclopeptide, exhibits various biological activities, such as anti-tumor, anti-angiogenic, and anti-metastatic activities. Designing an orally available formulation of RA-XII is of great importance in the development of clinically useful anticancer agents. However, RA-XII shows low oral bioavailability in rats due to its poor solubility and low permeability. To overcome these limitations, in this work, a natural deep eutectic solvent (NADES) was designed to efficiently deliver RA-XII by oral administration. A novel NADES composed of betaine and mandelic acid in the molar ratio of 1:1 (Bet-Man NADES) was successfully prepared based on a binary phase diagram of Bet and Man. Acute toxicity studies indicated that Bet-Man NADES was well tolerated with acceptable toxicity. In Bet-Man NADES solutions, the solubility of RA-XII was increased by up to 17.54-fold, and the diffusion and permeability of RA-XII carried out in a Franz cell was also significantly improved 10.35 times. In terms of biopharmaceutical classification this is translated into a change for RA-XII from class IV to class II systems. More importantly, Bet-Man NADES was transferred into the solid formulation by the inclusion of a polymer, and amorphous solid dispersions based on Bet-Man NADES (PVP K30/NADES/RA-XII, ASDs) were successfully prepared to improve uniformity, apparent solubility, dissolution, and cytotoxicity in vitro. Consequently, the oral bioavailability of RA-XII in NADES solutions and ASDs was enhanced by approximately 11.58 and 7.56 times compared with that of pure RA-XII in 0.5% CMCNa. Thus, it can be seen that a natural deep eutectic solvent and its modified amorphous solid dispersions are appropriate novel strategies for improving dissolution rate and bioavailability of poor soluble natural products such as RA-XII.

The Effect of Cream and Gel Vehicles on the Percutaneous Absorption and Skin Retention of a New Eugenol Derivative With Antioxidant Activity.

The effect of cream and gel vehicles containing clove water on skin permeability was compared for a new eugenol derivative (eugenyl dichloroacetate—EDChA) with antioxidant activity. In vitro permeation experiments were conducted in a Franz cell with porcine skin. The cumulative mass and skin accumulation of EDChA were investigated and compared. The antioxidative capacity of the studied vehicles was determined by using the diphenylpicrylhydrazyl (DPPH) free radical reduction method. The antioxidant activity (evaluated with DPPH, ABTS, and the Folin–Ciocalteu methods) of the fluid that penetrated through the pig skin and of the fluid obtained after the skin extraction, were also determined. For comparison, eugenol was also tested. The results of this work could contribute to the development of vehicles with antioxidant potential estimated after 24 h of conducting the experiment, which indicates long-term protection against reactive oxygen species (ROS) in the deeper layers of the skin. The waste water from the clove buds steam distillation -contains several valuable biologically active compounds, and its use is environmentally friendly. We observed that gel vehicles were the best enhancer of skin permeation for both eugenol and its derivative. In most cases, -similar cumulative masses of eugenol and its ester were found in the acceptor fluid. The accumulation of EDChA was higher for cream vehicles in relation to the parent eugenol when applied onto the skin. The greatest amounts of eugenol were accumulated in the skin when these compounds were used in gel vehicles.

From soil to cosmetic industry: Validation of a new cosmetic ingredient extracted from chestnut shells

Sustainability arises as a challenge in the last decades and the cosmetic field is not an exception. The search for new cosmetic active principles extracted from food byproducts through eco-innovative technologies has emerged as a novel concept. However, the European Regulation is very restrictive and different assays should be performed to guarantee the products' efficacy and safety. Considering a multidisciplinary approach, this paper aims to compare chestnut shells extracts prepared by three different green techniques – Subcritical Water Extraction (SWE), Ultrasound-Assisted Extraction (UAE) and Supercritical Fluids Extraction (SFE) – regarding antimicrobial activity, hyaluronidase and elastase inhibitory activities, in-vitro cytotoxicity on dermal cells (HaCaT and HFF-1) and skin permeation (using Franz cells coupled to human skin). The best extract was tested on skin and ocular 3D models and through an in-vivo patch test to evaluate its irritancy and safety. The results demonstrated the antimicrobial properties of the extracts (particularly against Staphylococcus aureus) as well as the capacity to inhibit the hyaluronidase (IC50 = 0.76–54.36 mg/mL) and elastase (33.56–82.70% at 0.4 mg/mL) activities. Regarding in-vitro cell assays, UAE and SWE extracts revealed the best outcomes. Between 0.1 and 100 μg/mL, none of the extracts conducted to a decrease of cell viability in both cell lines (HaCaT and HFF-1). The ex-vivo assay proved that SWE extract led to a higher polyphenol's permeation (1061.6 μg/g dw), being selected for further assays. Ellagic acid was the major polyphenol that permeated the human skin (732.1–847.0 μg/g dw). The 3D skin and ocular models evidenced absence of irritation by SWE extract, without decreasing cell viability and releasing IL-1α. Finally, an in-vivo patch test confirmed the absence of irritation in humans based on the acute irritation index of 0.50 achieved 24 h after the patch removal. To the best of our knowledge, this is the first study that validated by in-vitro and in-vivo assays, and in accordance with the European Regulation 1223/2009, a new cosmetic ingredient extracted from chestnut shells.

Franz cells for facile biosensor evaluation: A case of HRP/SWCNT-based hydrogen peroxide detection via amperometric and wireless modes

Reducing animal use in biosensor research requires broader use of in vitro methods. In this work, we present a novel application of Franz cells suitable for biosensor development and evaluation in vitro. The work describes how Franz cell can be equipped with electrodes enabling characterization of biosensors in close proximity to skin. As an example of a sensor, hydrogen peroxide biosensor was prepared based on horseradish peroxidase (HRP)/single-walled carbon nanotube (SWCNT)-modified textile. The electrode exhibited lower detection limit of 0.3 μM and sensitivity of 184 μA mM−1 cm−2. The ability of this biosensor to monitor H2O2 penetration through skin and dialysis membranes was evaluated in Franz cell setup in amperometric and wireless modes. The results also show that catalase activity present in skin is a considerable problem for epidermal sensing of H2O2. This work highlights opportunities and obstacles that can be addressed by assessment of biosensors in Franz cell setup before progressing to their testing in animals and humans.

Cationic liposomes mediated transdermal delivery of meloxicam and ketoprofen: Optimization of the composition, in vitro and in vivo assessment of efficiency

New liposomes modified with pyrrolidinium surfactants containing a hydroxyethyl fragment (CnPB, n = 12, 14, 16) were prepared for transdermal delivery of non-steroidal anti-inflammatory drugs. In order to obtain the optimal composition, the surfactant/lipid molar ratio (0.02/1; 0.029/1; 0.04/1) and the amphiphile hydrocarbon tail length were varied. Rhodamine B was loaded in all formulations, while meloxicam and ketoprofen in selected ones. For liposomes studied the hydrodynamic diameter was in the range of 80–130 nm, the zeta potential ranged from +35 to +50 mV, EE was 75–99%. Liposome modification leads to a prolonged release of the rhodamine B (up to 10–12 h) and faster release of non-steroidal drugs (up to 7–8 h) in vitro. The ability to cross the skin barrier using Franz cells was investigated for liposomal meloxicam and ketoprofen. The total amount of meloxicam and ketoprofen passed through the Strat-M® membranes during 51 h was 51–114 μg/cm2 and 87–105 μg/cm2 respectively. The evaluation of transdermal diffusion ex vivo showed that total amount of liposomal ketoprofen passed through the skin during 51 h was 140–162 μg/cm2. Liposomes modified with C16PB were found as the most effective inflammation reducing formulation in the carrageenan edema model of rat paw.

Transdermal Delivery Systems for Ibuprofen and Ibuprofen Modified with Amino Acids Alkyl Esters Based on Bacterial Cellulose.

The potential of bacterial cellulose as a carrier for the transport of ibuprofen (a typical example of non-steroidal anti-inflammatory drugs) through the skin was investigated. Ibuprofen and its amino acid ester salts-loaded BC membranes were prepared through a simple methodology and characterized in terms of structure and morphology. Two salts of amino acid isopropyl esters were used in the research, namely L-valine isopropyl ester ibuprofenate ([ValOiPr][IBU]) and L-leucine isopropyl ester ibuprofenate ([LeuOiPr][IBU]). [LeuOiPr][IBU] is a new compound; therefore, it has been fully characterized and its identity confirmed. For all membranes obtained the surface morphology, tensile mechanical properties, active compound dissolution assays, and permeation and skin accumulation studies of API (active pharmaceutical ingredient) were determined. The obtained membranes were very homogeneous. In vitro diffusion studies with Franz cells were conducted using pig epidermal membranes, and showed that the incorporation of ibuprofen in BC membranes provided lower permeation rates to those obtained with amino acids ester salts of ibuprofen. This release profile together with the ease of application and the simple preparation and assembly of the drug-loaded membranes indicates the enormous potentialities of using BC membranes for transdermal application of ibuprofen in the form of amino acid ester salts.

Comparison of Modern In Vitro Permeability Methods with the Aim of Investigation Nasal Dosage Forms.

Nowadays, the intranasal route has become a reliable alternative route for drug administration to the systemic circulation or central nervous system. However, there are no official in vitro diffusion and dissolution tests especially for the investigation of nasal formulations. Our main goal was to study and compare a well-known and a lesser-known in vitro permeability investigation method, in order to ascertain which was suitable for the determination of drug permeability through the nasal mucosa from different formulations. The vertical diffusion cell (Franz cell) was compared with the horizontal diffusion model (Side-Bi-Side). Raw and nanonized meloxicam containing nasal dosage forms (spray, gel and powder) were tested and compared. It was found that the Side-Bi-Side cell was suitable for the investigation of spray and powder forms. In contrast, the gel was not measurable on the Side-Bi-Side cell; due to its high viscosity, a uniform distribution of the active substance could not be ensured in the donor phase. The Franz cell, designed for the analysis of semi-solid formulations, was desirable for the investigation of nasal gels. It can be concluded that the application of a horizontal cell is recommended for liquid and solid nasal preparations, while the vertical one should be used for semi-solid formulations.

Comparison of Synthetic Sweat and Influence of Sebum in the Permeation of Bioaccessible Metal(loid)s from Contaminated Soils through a Synthetic Skin Membrane.

Dermal exposure to metal(loid)s from contaminated soils has received less attention than oral and inhalation exposure. Still, it can be a relevant pathway for some contaminants. Comparison of synthetic sweats (donor solutions), the influence of sebum, and the characterization of diffusion parameters through a synthetic membrane (acting as skin surrogate) in the permeation of metal(loid)s (As, Cr, Cu, Ni, Pb, and, Zn) from polluted soils is missing. The dermal bioaccessibility tests were performed using two sweat compositions [EN 1811, pH 6.5 (sweat A) and NIHS 96-10, pH 4.7 (sweat B)]. Diffusion parameters of soluble metal(loid)s using the Franz cell methodology were calculated using the Strat-M membrane. The influence of synthetic sebum in the permeation of metal(loid)s was also investigated. The metal(loid) bioaccessibility percentage was higher for sweat B (pH 4.7) compared to sweat A (pH 6.5), attributed to lower pH of sweat B. Among the six elements tested, only chromium and copper permeated the membrane. Permeation coefficient (Kp) was higher for chromium in sweat A (0.05-0.11 cm h-1) than sweat B (0.0007-0.0037 cm h-1) likely due to a higher pH and thus more permeable Cr species. The presence of sebum increased lag times for copper permeation. Additional studies regarding speciation of metal(loid)s following extractions in synthetic sweat and comparison of synthetic membrane Strat-M and human skin in the permeation of metal(loid)s are recommended.

Dermal Delivery of Niacinamide-In Vivo Studies.

In vivo human studies are considered to be the “gold standard” when investigating (trans)dermal delivery of actives. Previously, we reported the effects of a range of vehicles on the delivery of niacinamide (NIA) using conventional Franz cell studies. In the present work, dermal delivery of NIA was investigated in vivo in human subjects using confocal Raman spectroscopy (CRS) and tape stripping (TS). The vehicles investigated included propylene glycol (PG), Transcutol® P (TC), binary combinations of PG with oleic acid (OA) or linolenic acid (LA) and a ternary system comprising of TC, caprylic/capric triglyceride (CCT) and dimethyl isosorbide (DMI). For the CRS studies, higher area under curve (AUC) values for NIA were observed for the PG:LA binary system compared with PG, TC and TC:CCT:DMI (p < 0.05). A very good correlation was found between the in vitro cumulative permeation of NIA and the AUC values from Raman intensity depth profiles, with a Pearson correlation coefficient (R2) of 0.84. In addition, an excellent correlation (R2 = 0.97) was evident for the signal of the solvent PG and the active. CRS was also shown to discriminate between NIA in solution versus crystalline NIA. The findings confirm that CRS is emerging as a powerful approach for dermatopharmacokinetic studies of both actives and excipients in human.

Ethosomes and Transethosomes for Mangiferin Transdermal Delivery.

Mangiferin is a natural glucosyl xanthone with antioxidant and anti-inflammatory activity, making it suitable for protection against cutaneous diseases. In this study ethosomes and transethosomes were designed as topical delivery systems for mangiferin. A preformulation study was conducted using different surfactants in association with phosphatidylcholine. Vesicle dimensional distribution was monitored by photon correlation spectroscopy, while antioxidant capacity and cytotoxicity were respectively assessed by free radical scavenging analysis and MTT on HaCaT keratinocytes. Selected nanosystems were further investigated by cryogenic transmission electron microscopy, while mangiferin entrapment capacity was evaluated by ultracentrifugation and HPLC. The diffusion kinetics of mangiferin from ethosomes and transethosomes evaluated by Franz cell was faster in the case of transethosomes. The suitability of mangiferin-containing nanovesicles in the treatment of skin disorders related to pollutants was investigated, evaluating, in vitro, the antioxidant and anti-inflammatory effect of ethosomes and transethosomes on human keratinocytes exposed to cigarette smoke as an oxidative and inflammatory challenger. The ability to induce an antioxidant response (HO-1) and anti-inflammatory status (IL-6 and NF-kB) was determined by RT-PCR and immunofluorescence. The data demonstrated the effectiveness of mangiferin loaded in nanosystems to protect cells from damage. Finally, to gain insight into the keratinocytes’ uptake of ethosome and transethosome, transmission electron microscopy analyses were conducted, showing that both nanosystems were able to pass intact within the cells.

Can mesoporous nanoparticles promote bioavailability of topical pharmaceutics?

When applied to skin, particulate matter has been shown to accumulate in hair follicles. In addition to follicles, the skin topography also incorporates trench-like furrows where particles potentially can accumulate; however, the furrows have not been as thoroughly investigated in a drug delivery perspective. Depending on body site, the combined follicle orifices cover up to 10% of the skin surface, while furrows can easily cover 20%, reaching depths exceeding 25 µm. Hence, porous particles of appropriate size and porosity could serve as carriers for drugs to be released in the follicles prior to local or systemic absorption. In this paper, we combine multiphoton microscopy, scanning electron microscopy, and Franz cell diffusion technology to investigate ex-vivo skin accumulation of mesoporous silica particles (average size of 400–600 nm, 2, and 7 µm, respectively), and the potential of which as vehicles for topical delivery of the broad-spectrum antibiotic metronidazole. We detected smaller particles (400–600 nm) in furrows at depths of about 25 µm, also after rinsing, while larger particles (7 µm) where located more superficially on the skin. This implies that appropriately sized porous particles may serve as valuable excipients in optimizing bioavailability of topical formulations. This work highlights the potential of skin furrows for topical drug delivery.

Biocompatible Composite Materials Based on Porous Hydroxyapatite Ceramics and Copolymer of Lactide and Glycolide

The intensive development of reconstructive surgery and traumatology provides a stable demand for new materials for implants. Of particular interest are materials based on hydroxyapatite, which are chemically close to the elemental composition and structure of bone and have similar bioactive properties. The aim of this work was to obtain porous composite materials based on hydroxyapatite and a copolymer of lactide and glycolide with properties suitable for use as a material for bone implants. The phase and elemental composition of composites was investigated by infrared spectroscopy, X-ray diffraction, and X-ray photoelectronic spectroscopy methods, and it was established how the production process affects the composition of materials. Regularities of the formation of porosity by the methods of low-temperature adsorption of nitrogen, immersion in a liquid (determination of the pore space volume), measurement of the diffusion coefficient through the material (Franz cell), and surface properties of composite materials by the Hammett indicator method, by the lying drop method were revealed. Regularities were established between the surface properties and the composition of materials and their biocompatibility determined using monocytes isolated from human peripheral blood.

Dexamethasone-Loaded Lipomers: Development, Characterization, and Skin Biodistribution Studies.

Follicular targeting has gained more attention in recent decades, due to the possibility of obtaining a depot effect in topical administration and its potential as a tool to treat hair follicle-related diseases. Lipid core ethyl cellulose lipomers were developed and optimized, following which characterization of their physicochemical properties was carried out. Dexamethasone was encapsulated in the lipomers (size, 115 nm; polydispersity, 0.24; zeta-potential (Z-potential), +30 mV) and their in vitro release profiles against dexamethasone in solution were investigated by vertical diffusion Franz cells. The skin biodistribution of the fluorescent-loaded lipomers was observed using confocal microscopy, demonstrating the accumulation of both lipomers and fluorochromes in the hair follicles of pig skin. To confirm this fact, immunofluorescence of the dexamethasone-loaded lipomers was carried out in pig hair follicles. The anti-inflammatory (via TNFα) efficacy of the dexamethasone-loaded lipomers was demonstrated in vitro in an HEK001 human keratinocytes cell culture and the in vitro cytotoxicity of the nanoformulation was investigated.

Characterization of an ester-based core-multishell (CMS) nanocarrier for the topical application at the oral mucosa

ObjectivesTopical drug administration is commonly applied to control oral inflammation. However, it requires sufficient drug adherence and a high degree of bioavailability. Here, we tested the hypothesis whether an ester-based core-multishell (CMS) nanocarrier is a suitable nontoxic drug-delivery system that penetrates efficiently to oral mucosal tissues, and thereby, increase the bioavailability of topically applied drugs.Material and methodsTo evaluate adhesion and penetration, the fluorescence-labeled CMS 10-E-15-350 nanocarrier was applied to ex vivo porcine masticatory and lining mucosa in a Franz cell diffusion assay and to an in vitro 3D model. In gingival epithelial cells, potential cytotoxicity and proliferative effects of the nanocarrier were determined by MTT and sulphorhodamine B assays, respectively. Transepithelial electrical resistance (TEER) was measured in presence and absence of CMS 10-E-15-350 using an Endohm-12 chamber and a volt-ohm-meter. Cellular nanocarrier uptake was analyzed by laser scanning microscopy. Inflammatory responses were determined by monitoring pro-inflammatory cytokines using real-time PCR and ELISA.ResultsCMS nanocarrier adhered to mucosal tissues within 5 min in an in vitro model and in ex vivo porcine tissues. The CMS nanocarrier exhibited no cytotoxic effects and induced no inflammatory responses. Furthermore, the physical barrier expressed by the TEER remained unaffected by the nanocarrier.ConclusionsCMS 10-E-15-350 adhered to the oral mucosa and adhesion increased over time which is a prerequisite for an efficient drug release. Since TEER is unaffected, CMS nanocarrier may enter the oral mucosa transcellularly.Clinical relevanceNanocarrier technology is a novel and innovative approach for efficient topical drug delivery at the oral mucosa.

PVA/chitosan hydrogels loaded with octenidine and 2-phenoxyethanol for wound dressings

Introduction Polyvinylacohol (PVA)/chitosan hydrogels are ideal candidates for the production of wound dressings as their combination can provide good mechanical and antibacterial properties, alongside the ability to be loaded and release drugs [1,2]. The main goal of this work is to evaluate the possibility of using PVA/chitosan hydrogels as platforms for the release of octenidine dihydrochlorate and 2-phenoxyethanol, a drug combination that has antiseptic, antibacterial and antimycotic properties. Materials and methods PVA aqueous solutions were prepared by dissolution at 90 °C and chitosan was added to get different mass ratios (3:1, 1:1) and a final polymer concentration of 5% w/w. The mixtures were poured in petri dishes and submitted to five cycles of freeze-thawing (18 h at −20 °C, 6 h at 23 °C in each cycle) to trigger polymerisation. After a washing step, they were lyophilised. Before testing, the samples were hydrated for 72 h. Swelling ratio, water content and degradation experiments in simulated exudate containing lysozyme were performed to assess the stability of the hydrogels. Contact angle was measured using captive bubble method and hydrogels structure was assessed using SEM. Drug loading was carried out by soaking the samples in Octiset® solution at room temperature. Drug release experiments were performed in simulated exudate using Franz cells. Results The hydrogels showed swelling ratios between ≈1300 and 2100% and high water contents of 93–95%. Degradation in the first 2 days in the presence of the protein was less than 37%. The hydrogels showed high hydrophilicity and porosity. Drug loading and release experiments (Figure 1) proved that the hydrogels are able to release both drugs in a controlled way during the first day. Discussion and conclusions: The obtained results suggest that the proposed formulations possess drug retention abilities compatible with their use. They shall be suitable for the production of wound dressings with therapeutic properties. Further research should provide insight into the mechanical properties of the hydrogels, their antibacterial behaviour and the choice of a sterilisation method. Figure 1. Cumulative drug release curves of octenidine dihydrochlorate (A) and 2-phenoxyethanol (B).

Transdermal Permeation of Caffeine Aided by Ionic Liquids: Potential for Enhanced Treatment of Cellulitis.

Ginoid hydrolipodystrophy (HDLG) or "cellulite" involves alteration of the cutaneous relief and occurs in 80-90% of the female population. Several topical treatments are available with the use of substances capable of stimulating lipolysis, such as caffeine. However, the effectiveness of topical therapy is related to the processes of release and permeation of the active in skin cells. In this sense, ionic liquids, such as choline geranate, are considered to facilitate topical permeation agents. In this way, the aim of this research was to develop and evaluation of the effectiveness of a cosmetic product for topical treatment of cellulite with caffeine in association with choline geranate. The choline geranate was synthesized by the reaction between geranic acid and choline hydroxide [1: 2]. The gel was prepared using 2% Carpobol 940®, 5% caffeine, and 1% choline geranate. Preliminary and accelerated stability tests were performed by checking pH, spreadability, and organoleptic characteristics. The transdermal permeation capacity of caffeine in vitro was evaluated by the Franz cell permeation assay, and the gel cytotoxicity by the MTS method. To prove the efficacy in the treatment of cellulite, a pilot type 1 clinical trial was carried out. The formulation was considered stable and the product maintained your characteristics during 180 days of storage. The product showed moderate cytotoxicity and high skin permeation capacity. In the clinical trial, it showed results superior to the caffeine gel without ionic liquid. The developed gel favored the cutaneous permeation of caffeine, showing a promising product in the treatment of cellulite.

Nanoemulsified Butenafine for Enhanced Performance against Experimental Cutaneous Leishmaniasis.

The production of ergosterol lipid involves the activity of different enzymes and is a crucial event for the Leishmania membrane homeostasis. Such enzymes can be blocked by azoles and allylamines drugs, such as the antifungal butenafine chloride. This drug was active on parasites that cause cutaneous and visceral leishmaniasis. Based on the leishmanicidal activity of butenafine chloride and considering the absence of reports about the therapeutic potential of this drug in cutaneous leishmaniasis, the present work is aimed at analyzing the efficacy of butenafine formulated in two different topical delivery systems, the self-nanoemulsifying drug delivery systems (BUT-SNEDDS) and in a SNEDDS-based nanogel (BUT-SNEDDS gel) as well as in the free form in experimental cutaneous leishmaniasis. Physical studies showed that both formulations were below 300 nm with low polydispersity (<0.5) and good colloidal stability (around -25 mV). Increased steady-state flux was reported for nanoenabled butenafine formulations with reduced lag time in Franz cell diffusion assays across Strat-M membranes. No toxic or inflammatory reactions were detected in animals treated with BUT-SNEDDS, BUT-SNEDDS gel, or butenafine. Animals topically treated with butenafine (free or nanoformulated) showed small dermal lesions and low tissue parasitism. Furthermore, BUT-SNEDD gel and butenafine presented similar efficacy than the standard drug Glucantime given by the intralesional route. Increased levels of IFN-γ were observed in animals treated with BUT-SNEDDS gel or butenafine. Based on these data, the antifungal drug butenafine chloride can be considered an interesting repurposed drug for the treatment of cutaneous leishmaniasis.

D-α-Tocopherol-Based Micelles for Successful Encapsulation of Retinoic Acid.

All-trans-retinoic acid (ATRA) represents the first-choice treatment for several skin diseases, including epithelial skin cancer and acne. However, ATRA’s cutaneous side effects, like redness and peeling, and its high instability limit its efficacy. To address these drawbacks and to improve ATRA solubilization, we prepared ATRA-loaded micelles (ATRA-TPGSs), by its encapsulation in D-α-tocopheryl-polyethylene-glycol-succinate (TPGS). First, to explore the feasibility of the project, a solubility study based on the equilibrium method was performed; then, six ATRA-TPGS formulations were prepared by the solvent-casting method using different TPGS amounts. ATRA-TPGSs showed small sizes (11–20 nm), low polydispersity, slightly negative zeta potential, and proved good encapsulation efficiency, confirmed by a chemometric-assisted Fourier transform infrared spectroscopy (FTIR) investigation. ATRA-TPGS stability was also investigated to choose the most stable formulation. Using Carbopol® 980 as gelling agent, ATRA-TPGS-loaded gels were obtained and analyzed for their rheological profiles. Ex vivo release studies from ATRA-TPGSs were performed by Franz cells, demonstrating a permeation after 24 h of 22 ± 4 µ cm−2. ATRA-TPGSs showed enhanced cytotoxic effects on melanoma cells, suggesting that these formulations may represent a valid alternative to improve patient compliance and to achieve more efficacious therapeutic outcomes.

Effective Lipid Nanocarriers Based on Linseed Oil for Delivery of Natural Polyphenolic Active

The main purpose of the present research was to test the ability of nanostructured lipid carriers (NLCs) to efficiently host a hydrophilic polyphenol active with health-promoting activities (caffeic acid (CA)). The caffeic acid-loaded lipid nanocarriers (CA-NLCs) were obtained by high-pressure homogenization technique using a surfactant mixture of Tween 20 and L-α-phosphatidylcholine in association with a lipid mixture of linseed oil, hexadecyl palmitate, and glycerol monostearate. In the first stage, the proportion between surfactant mixture and lipid phase has been varied to obtain appropriate stable nanocarriers. The optimized NLCs have been further loaded with different amounts of caffeic acid and were analyzed in terms of physical stability, size characteristics, and encapsulation efficiency. The antioxidant activity of CA-loaded NLCs and their release behavior have been tested by specific in vitro methods, e.g., ABTS (2,2-azinobis-(3-ethylbenzothiazoline-6-sulfonic acid)) assay and release experiments, by Franz cell diffusion. The ABTS assay highlighted a high antioxidant potential of the caffeic acid in association with linseed oil. The capacity to capture ABTS cationic radicals was superior for the NLC entrapping an initial amount of 1.5% CA, the level of antioxidant capacity being 91.3%. The in vitro release experiments showed a different release behavior, depending on the initial amount of caffeic acid used. NLC loaded with a higher concentration of CA manifests a gradual slow release, e.g., 45% CA after 24 h of in vitro experiments, while the NLC loaded with smaller concentration of CA assured a higher release in time, around 65%.