Use Of Filters Research Articles

Understanding the performance of geographic limits on Web of Science Core Collection databases, using the United Kingdom as an example.

To consider the approaches within Web of Science Core Collection (WoSCC) databases for limiting geographically. To compare the limits to an adaptation of NICE's UK MEDLINE filter for use on WoSCC databases. We tested and appraised the inbuilt functions and search field options that support identification by countries/regions and affiliations. We compared these with an adapted filter to identify healthcare research on or about the UK. We calculated the recall of the inbuilt limits and filter using 177 studies and investigated why records were missed. We also calculated the percentage reduction of the overall number-needed-to-screen (ONNS). Inbuilt limits within WoSCC enable identification of research from specific countries/regions or affiliations if there is data in the address field. Refining by affiliations allows retrieval of research where affiliations are in the 200 or 500 most frequent for a set of results. An adaptation of the UK MEDLINE filter achieved an average of 97% recall. ONNS was significantly reduced using the filter. However, studies where the countries or regions are only mentioned within the full text or other non-searchable fields will be missed. Information specialists should consider how inbuilt geographic limits operate on WoSCC and whether these are suitable for their research. The adapted filter can sensitively limit to the UK and could be useful for systematic reviews due to its high recall and ability to significantly reduce ONNS. Geographic filters can be feasible to adapt for use on WoSCC databases (where similar search fields are used between platforms).

Interference cancellation system of a microwave resonator filter for 4G and 5G applications

This paper aimed at designing a microwave resonator filter for use in 4G and 5G applications. A band resonator filter was designed and implemented using microstrip technology. Poor performance of a microstrip microwave resonator filter is due to spurious harmonics and unwanted frequencies which are always present and cause interferences of signals hindering effective communication. The coupling matrix was first obtained using polynomial functions of transmission and reflection coefficients. A cost function for optimization was developed and particle swarm optimization techniques were used to optimize the coupling matrix. The transversal matrix was developed and converted to the folded matrix for practical filter implementation. A bandpass filter was designed and simulated using high- frequency structure simulator software. Unwanted frequencies are eliminated by employing a novel square open loop resonator structure. The filter was designed to specification and the results show that unwanted frequencies were eliminated corresponding to the frequency of the outer resonator and therefore performs better than comparable filter.

Research of electret air filter: A review

AbstractThe harmful effects of air pollution on humans are multifaceted and are closely linked to outbreaks of various infectious viruses. Thus, design of high‐performance air filters that are lightweight, flexible, and easy to prepare is urgent. The electret air filter can utilize the electrostatic force of charge to capture dust particles, making it efficient and convenient, which is highly favored by people. In this study, a summary of the research on electret filters for highly efficient air purification is presented. First, this study outlines the mechanisms of air filtration methods and discusses three factors that evaluate filter performance. The methods of manufacturing electret air filters are then presented, and the advantages and limitations of different methods are discussed. Then, electrification, including corona discharge, friction electrification, electrospinning, thermal electrification, and water electrification as methods, enhances the physical charge adsorption performance of materials, while the use of fluorinate polymer, non‐fluorinate polymer, and biobased polymer as functional substrates exhibits varying degrees of electrification effects. Different materials and manufacturing techniques give the filters additional advantages, such as being self‐degradable and antibacterial. Finally, the challenges that remain in the development of electret filters for use in air purification are also discussed in terms of material type and fabrication technology. It is expected that highly efficient air purification with low energy consumption can be achieved by electret filters with multifunctional capabilities.

Estimation of phase distortions of the photoplethysmographic signal in digital IIR filtering

Pre-processing of the photoplethysmography (PPG) signal plays an important role in the analysis of the pulse wave signal. The task of pre-processing is to remove noise from the PPG signal, as well as to transmit the signal without any distortions for further analysis. The integrity of the pulse waveform is essential since many cardiovascular parameters are calculated from it using morphological analysis. Digital filters with infinite impulse response (IIR) are widely used in the processing of PPG signals. However, such filters tend to change the pulse waveform. The aim of this work is to quantify the PPG signal distortions that occur during IIR filtering in order to select a most suitable filter and its parameters. To do this, we collected raw finger PPG signals from 20 healthy volunteers and processed them by 5 main digital IIR filters (Butterworth, Bessel, Elliptic, Chebyshev type I and type II) with varying parameters. The upper cutoff frequency varied from 2 to 10 Hz and the filter order—from 2nd to 6th. To assess distortions of the pulse waveform, we used the following indices: skewness signal quality index (SSQI), reflection index (RI) and ejection time compensated (ETc). It was found that a decrease in the upper cutoff frequency leads to damping of the dicrotic notch and a phase shift of the pulse wave signal. The minimal distortions of a PPG signal are observed when using Butterworth, Bessel and Elliptic filters of the 2nd order. Therefore, we can recommend these filters for use in applications aimed at morphological analysis of finger PPG waveforms of healthy subjects.

Organic Synaptic Transistors with an Ultra‐Short‐Term Weight‐Reconstruction for Processing Multiple Types of Signals

AbstractAn organic synaptic transistor (OST) that utilizes a multiple‐annealing process and an ion gate to achieve significant reductions in operating voltage and increases in transconductance is demonstrated. The OST exhibits an ultra‐short‐term plasticity (USTP) with a maximum retention time of only 20.7 ms, which does not increase with the number and duration of spikes. This is the shortest retention time yet achieved by an ion‐gel‐regulated synaptic transistor. In addition, OST‐integrated array exhibits a tunable weight plasticity and a short weight refresh time for a stable image resetting in ample time of <0.2 s. It is also sensitive to the frequency and amplitude of electrical inputs; a low‐frequency suppression and a nonlinear amplitude gain enables OST‐constructed filter for use in processing multiple types of signals. This work is a step toward constructing high‐performance and multifunctional artificial intelligent systems.

Generative Text-to-Image Diffusion for Automated Map Production Based on Geosocial Media Data

The state of generative AI has taken a leap forward with the availability of open source diffusion models. Here, we demonstrate an integrated workflow that uses text-to-image stable diffusion at its core to automatically generate icon maps such as for the area of the Großer Garten, a tourist hotspot in Dresden, Germany. The workflow is based on the aggregation of geosocial media data from Twitter, Flickr, Instagram and iNaturalist. This data are used to create diffusion prompts to account for the collective attribution of meaning and importance by the population in map generation. Specifically, we contribute methods for simplifying the variety of contexts communicated on social media through spatial clustering and semantic filtering for use in prompts, and then demonstrate how this human-contributed baseline data can be used in prompt engineering to automatically generate icon maps. Replacing labels on maps with expressive graphics has the general advantage of reaching a broader audience, such as children and other illiterate groups. For example, the resulting maps can be used to inform tourists of all backgrounds about important activities, points of interest, and landmarks without the need for translation. Several challenges are identified and possible future optimizations are described for different steps of the process. The code and data are fully provided and shared in several Jupyter notebooks, allowing for transparent replication of the workflow and adoption to other domains or datasets.

THE INFLUENCE OF HEAD STRAP ELASTICITY ON THE PROTECTIVE PROPERTIES OF FILTERING FACEPIECE RESPIRATORS

The level of occupational respiratory diseases among workers in the mining, machine-building and metallurgical industries remains high. The most common occupational respiratory disease is pneumoconiosis, which is the result of the long-term inhalation of dust. It is possible to minimize the impact of dust on the workers and eliminate such diseases in the future due to the use of filtering mask respirators designed to reduce dust infiltration into the space under the mask. For this purpose, the choice of the type of elastic bands of filtering mask respirators has been substantiated by the geometric shape and tension forces that can ensure a permissible level of leakage of contaminated air into the breathing zone of the respirator during its use. A mathematical model has been developed to describe the influence of parameters of elastomeric headgear on the protective properties of the respirator. The dependence of the change in the residual tensile strength of the elastic bands of the headband has been established, and the dependence of the volume of air suction on the area of the elastic straps at the corresponding tension force has been determined. Using the model, the dependence of the volume of polluted air inflow on the area of the elastic straps at the corresponding tension force has been estimated. The design of the innovative inserts has been offered, which makes it possible to control the tension of the elastomeric head straps of the respirator to visualize the weakening of the pressure forces responsible for maintaining a tight fit.

Deep Filter Context Network for Click-Through Rate Prediction

The growth of e-commerce has led to the widespread use of DeepCTR technology. Among the various types, the deep interest network (DIN), deep interest evolution network (DIEN), and deep session interest network (DSIN) developed by Alibaba have achieved good results in practice. However, the above models’ use of filtering for the user’s own historical behavior sequences and the insufficient use of context features lead to reduced recommendation effectiveness. To address these issues, this paper proposes a novel article model: the deep filter context network (DFCN). This improves the efficiency of the attention mechanism by adding a filter to filter out data in the user’s historical behavior sequence that differs greatly from the target advertisement. The DFCN pays attention to the context features through two local activation units. This model greatly improves the expressiveness of the model, offering strong environment-related attributes and the adaptive capability of the model, with a significant improvement of up to 0.0652 in the AUC metric when compared with our previously proposed DICN under different datasets.

Characteristic Photoprotective Molecules from the Sphagnum World: A Solution-Phase Ultrafast Study of Sphagnic Acid.

A natural UV-absorbing chromophore extracted from sphagnum mosses, sphagnic acid, is proposed as a new natural support to chemical UV filters for use in cosmetic applications. Sphagnic acid is structurally related to the cinnamate family of molecules, known for their strong UV absorption, efficient non-radiative decay, and antioxidant properties. In this study, transient electronic absorption spectroscopy is used, in conjunction with steady-state techniques, to model the photodynamics following photoexcitation of sphagnic acid in different solvent systems. Sphagnic acid was found in each system to relax with lifetimes of ~200 fs and ~1.5 ps before generating a cis-isomer photoproduct. This study helps to elucidate the photoprotective mechanism of a new potential natural support to sunscreens, from a unique plant source.

Selection of the Parameters of Reactive Power Compensation and Harmonic Filtering Devices for an HVDC Transmission System Based on Voltage Source Converters

This article describes a method for selecting the parameters of AC and DC filters for a multi-terminal HVDC transmission system based on voltage source converters (VSC-HVDC). The equivalent circuit model of a multi-terminal VSC-HVDC system with the parameters ±500 kV and 500 MW was developed in the Matlab Simulink software package and presented in d-q coordinate axes. The system voltage source converters in the model were controlled using a three-level pulse-width modulation (PWM) to reduce the level of current and voltage higher harmonic components and decrease the capacity of AC and DC filters. To select the most efficient filter for use as part of a multi-terminal VSC-HVDC system, high-pass filters (HPF) and low-pass filters (LPF) were considered.

In search of health information…

AbstractSearching for health information is a core activity for health library and knowledge workers, whether seeking to support health care workers in overcoming barriers to accessing drug information, exploring the potential of text mining in developing search filters, translating search filters for use on alternative databases, or the importance of updating search filters to ensure their ongoing utility.

Flexible organic artificial synapse with ultrashort-term plasticity for tunable time-frequency signal processing

A flexible organic artificial synapse (OAS) for tunable time-frequency signal processing was fabricated using a tri-blend film that had been fabricated using a one-step solution method. When combined with a chitosan film, this OAS can achieve an ultrashort-term retention time of only 49 ms for instant electrical-computing applications; this is the shortest retention time yet achieved by a two-terminal artificial synapse. An array of these flexible OASs can withstand a high bending strain of 5% for 104 cycles; this deformation endurance is a new record. The OAS was also sensitive to the number and frequency of electrical inputs; a tunable cut-off frequency enables dynamic filtering for use in image detail enhancement. This work provides a new resource for development of future neuromorphic computing devices

Use of Shredded Recycled Plastic as Filter Bed Packing in a Vertical Flow Filter for Onsite Wastewater Treatment Plants: Preliminary Findings

Household wastewater is a problem, especially in areas with a dispersed settlement where there is no wastewater collection system or wastewater treatment plant. In this case, it is necessary to build a local or onsite wastewater treatment plant. This paper is an attempt to analyse the possibility of using recycled shredded ABS plastic (acrylonitrile butadiene styrene) as packing media in an experimental vertical flow filter for use in on-site wastewater treatment plants. Studies have shown that shredded recycled ABS is a promising filtration material that has several features important in the treatment process, like a large surface area, high mechanical strength and chemical inertness. The system was operated with a hydraulic load of 50 dm3/m2 (3 months). BOD5 (biochemical oxygen demand), COD (chemical oxygen demand), and total suspended solids (TSS) reduction efficiency in the primary effluent was high; 94.4%, 77.8%, and 92.8%, respectively.

Feeding management and appraisal of recirculating aquaculture system for spiny lobster Panulirus spp. weaning

The study aimed to assess lobster fry adaptation to a formulated diet over 1-3 days while evaluating the recirculating system's performance. 1,500 pueruli lobsters (average weight: 0.31 ± 0.01 g) were placed in 30 round 80 L tanks for 30 days. Lobsters underwent various feeding strategies: formulated diet only (FD), adjusting 10% fresh diet per day (D1), every 2 days (D2), every 3 days (D3), and fresh diet only (Fr). Each treatment had five replicates. Results showed feeding strategies influenced lobster growth, with survival rates between 23%-29%. The recommended strategy was adjusting 10% fresh diet every three days, yielding the best performance in final weight (0.93 g), weight gain (187%), and specific growth rate (3.5% per day). Initial weeks saw high mortality and moulting during the puerulus to post-puerulus transition. Water quality analysis indicated the phytobiological filter had lower total ammonia nitrogen (TAN), nitrite-N, nitrate-N, and higher pH compared to other filters in use.

Switch-Mode MOSFETs for Class A Radio Frequency Amplification

Vertical double diffused MOSFETs (“VDMOSFETs”) developed for switching power supplies were successfully used in high voltage, high frequency linear amplifier circuits. These high voltage power switches are surprisingly useful for linear RF power amplifiers and transmitters. In most of their intended applications such as in switching power supplies or switched digital amplifiers, VDMOSFETs are pulsed by a high voltage and the pulsed output is heavily filtered. This avoids the linear region of the VDMOSFET, which normally limits the efficiency to a theoretical maximum of 25%. However, in a search of MOSFETs for high voltage linear amplification using Class A bias without heavy use of filtering, these low-cost switching MOSFETs were found to work best, if limited to radio frequencies above 1.5 MHz. Conditions, and in particular, very low impedance driving of the MOSFET gate, were discovered that gave efficiencies of 70%, rivaling that of non-linear pulse techniques such as Class C or Class D operation. The beneficial effect of linear operation combined with high efficiency at a high voltage is suggested to arise from Miller capacitance. This was only seen at radio frequencies and with the larger current, higher gate capacitance devices. Switching MOSFETs as described here should be considered alongside dedicated RF MOSFETs such as the more expensive LD (lateral diffused) MOSFET when working with RF power.

Insane in the vembrane: filtering and transforming VCF/BCF files.

We present vembrane as a command line variant call format (VCF)/binary call format (BCF) filtering tool that consolidates and extends the filtering functionality of previous software to meet any imaginable filtering use case. Vembrane exposes the VCF/BCF file type specification and its inofficial extensions by the annotation tools VEP and SnpEff as Python data structures. vembrane filter enables filtration by Python expressions, requiring only basic knowledge of the Python programming language. vembrane table allows users to generate tables from subsets of annotations or functions thereof. Finally, it is fast, by using pysam and relying on lazy evaluation. Source code and installation instructions are available at github.com/vembrane/vembrane (doi: 10.5281/zenodo.7003981). Supplementary data are available at Bioinformatics online.

536 UVA1 harmful effects and benefit of an enlarged photoprotection covering the whole UV spectrum

UVA1 rays (340–400 nm) representing at least 75% of solar UVs, generate cellular oxidative stress and are able to induce cutaneous damage and impairment of functions (immunity, development, inflammation, dermal matrix organization). Clinically, they contribute to hyperpigmentation, immunosuppression, carcinogenesis and photoaging. State of the art sunscreens can filter UV rays up to 370 nm, but lack absorption in the 370–400 nm range supporting the development of new UVA1 filters. The absorber Methoxypropylamino Cyclohexenylidene Ethoxyethylcyanoacetate (MCE), exhibiting a peak of absorption at 385 nm has recently been listed in the Annex VI of EU authorized UV filters for use in suncreens.

Design of a Wide-Beamwidth Pixelated Dielectric Resonator Antenna Using a Modified Stepped-Impedance Filter to Suppress Harmonics

This study designed a wide-beamwidth pixelated dielectric resonator antenna (DRA) combined with a low-pass filter (LPF) to suppress harmonics. The DRA was designed to create a wide-beam pattern with a pixelated structure. The pixelated DRA was optimized by a genetic-learning particle swarm optimization algorithm. To prevent significant higher-mode radiation and harmonics from occurring in the DRA, an LPF was included in its feeding line. The filter had a seventh-order Chebyshev design, and a hybrid step-impedance filter was proposed by modifying the step-impedance filter for use in narrow spaces behind the ground.

Structure-oriented filtering in unsupervised multiattribute seismic facies analysis

The growing use of automated methods in seismic interpretation highlights the importance of data treatment. We analyze the effect of structure-oriented filtering seismic data on machine learning techniques and apply the filter to the data before calculating seismic attributes. We apply this methodology to a migrated section of Buzios Field from the Brazilian presalt in Santos Basin. The analysis is restricted to the case of unsupervised methods, namely self-organized maps and generative topographic mapping. We use four different seismic attributes that are known to be good salt indicators. Two are based on texture, and two are based on coherence. The use of filtering can improve salt identification in clustering when more attributes are considered.

Photobiocidal-triboelectric nanolayer coating of photosensitizer/silica-alumina for reusable and visible-light-driven antibacterial/antiviral air filters

Outbreaks of airborne pathogens pose a major threat to public health. Here we present a single-step nanocoating process to endow commercial face mask filters with photobiocidal activity, triboelectric filtration capability, and washability. These functions were successfully achieved with a composite nanolayer of silica-alumina (Si-Al) sol–gel, crystal violet (CV) photosensitizer, and hydrophobic electronegative molecules of 1H, 1H, 2H, 2H-perfluorooctyltriethoxysilane (PFOTES). The transparent Si-Al matrix strongly immobilized the photosensitizer molecules while dispersing them spatially, thus suppressing self-quenching. During nanolayer formation, PFOTES was anisotropically rearranged on the Si-Al matrix, promoting moisture resistance and triboelectric charging of the Si-Al/PFOTES-CV (SAPC)-coated filter. The SAPC nanolayer stabilized the photoexcited state of the photosensitizer and promoted redox reaction. Compared to pure-photosensitizer-coated filters, the SAPC filter showed substantially higher photobiocidal efficiency (∼99.99 % for bacteria and a virus) and photodurability (∼83 % reduction in bactericidal efficiency for the pure-photosensitizer filter but ∼0.34 % for the SAPC filter after 72 h of light irradiation). Moreover, after five washes with detergent, the SAPC filter maintained its photobiocidal and filtration performance, proving its reusability potential. Therefore, this SAPC nanolayer coating provides a practical strategy for manufacturing an antimicrobial and reusable mask filter for use during the ongoing COVID-19 pandemic.