Fickian Diffusion Research Articles

Research on multi‐mechanism synergistic effects of gas cross‐scale percolation in tight gas reservoirs of Yanchang oilfield

AbstractRevealing the gas transport patterns at the microscale and nanoscale is of great scientific and engineering significance for unconventional oil and gas exploration and development. This paper first systematically analyzes the properties of gas transport mechanism under different Knudsen number conditions. Second, the coupling modes of the cross‐scale multi‐drive mechanism are systematically categorized, and three typical coupling calculation methods are pointed out. Again, the rationality of the cross‐scale multi‐agency coupling is quantitatively calculated. The results show that (a) Under the influence of Fick's diffusion equation, when Knr > 0, the coupled ‘slip flow–Fick diffusion–Knudsen diffusion’ equation does not converge to the Knudson diffusion equation. (b) The ‘Fick diffusion–Knudsen diffusion’ coupled equation is calculated to be more than 102 times as large as the Knudsen diffusion equation.

Metal-Organic Framework-Based Antimicrobial Touch Surfaces to Prevent Cross-Contamination.

Infection diseases are a major threat to global public health, with nosocomial infections being of particular concern. In this context, antimicrobial coatings emerge as a promising prophylactic strategy to reduce the transmission of pathogens and control infections. Here, antimicrobial door handle covers to prevent cross-contamination are prepared by incorporating iodine-loaded UiO-66 microparticles into a potentially biodegradable polyurethane polymer (Baycusan® eco E 1000). These covers incorporate MOF particles that serve as both storage reservoirs and delivery systems for the biocidal iodine. Under realistic touching conditions, the door handle covers completely inhibit the transmission of Gram-positive bacterial species (Staphylococcus aureus, and Enterococcus faecalis), Gram-negative bacterial species (Escherichia coli, Pseudomonas aeruginosa, and Acinetobacter baumannii), and fungi (Candida albicans). The covers remain effective even after undergoing multiple contamination cycles, after being cleaned, and when tinted to improve discretion and usability. Furthermore, as the release of iodine from the door handle covers follow hindered Fickian diffusion, their antimicrobial lifetime is calculated to be as long as approximately two years. Together, these results demonstrate the potential of our antimicrobial door handle covers to prevent cross-contamination, and underlines the efficacy of integrating MOFs into innovative technologies. This article is protected by copyright. All rights reserved.

Antiepileptic drug-loaded and multifunctional iron oxide@silica@gelatin nanoparticles for acid-triggered drug delivery

The current study developed an innovative design for the production of smart multifunctional core-double shell superparamagnetic nanoparticles (NPs) with a focus on the development of a pH-responsive drug delivery system tailored for the controlled release of Phenytoin, accompanied by real-time monitoring capabilities. In this regard, the ultra-small superparamagnetic iron oxide@silica NPs (IO@Si MNPs) were synthesized and then coated with a layer of gelatin containing Phenytoin as an antiepileptic drug. The precise saturation magnetization value for the resultant NPs was established at 26 emu g-1. The polymeric shell showed a pH-sensitive behavior with the capacity to regulate the release of encapsulated drug under neutral pH conditions, simultaneously, releasing more amount of the drug in a simulated tumorous-epileptic acidic condition. The NPs showed an average size of 41.04 nm, which is in the desired size range facilitating entry through the blood–brain barrier. The values of drug loading and encapsulation efficiency were determined to be 2.01 and 10.05%, respectively. Moreover, kinetic studies revealed a Fickian diffusion process of Phenytoin release, and diffusional exponent values based on the Korsmeyer-Peppas equation were achieved at pH 7.4 and pH 6.3. The synthesized NPs did not show any cytotoxicity. Consequently, this new design offers a faster release of PHT at the site of a tumor in response to a change in pH, which is essential to prevent epileptic attacks.

The Application of Protein Concentrate Obtained from Green Leaf Biomass in Structuring Nanofibers for Delivery of Vitamin B12.

Nanofibers made of natural proteins have caught the increasing attention of food scientists because of their edibility, renewability, and possibility for various applications. The objective of this study was to prepare nanofibers based on pumpkin leaf protein concentrate (LPC) as a by-product from some crops and gelatin as carriers for vitamin B12 using the electrospinning technique. The starting mixtures were analyzed in terms of viscosity, density, surface tension, and electrical conductivity. Scanning electron micrographs of the obtained nanofibers showed a slight increase in fiber average diameter with the addition of LPC and vitamin B12 (~81 nm to 109 nm). Fourier transform infrared spectroscopy verified the physical blending of gelatin and LPC without phase separation. Thermal analysis showed the fibers had good thermal stability up to 220 °C, highlighting their potential for food applications, regardless of the thermal processing. Additionally, the newly developed fibers have good storage stability, as detected by low water activity values ranging from 0.336 to 0.376. Finally, the release study illustrates the promising sustained release of vitamin B12 from gelatin-LPC nanofibers, mainly governed by the Fickian diffusion mechanism. The obtained results implied the potential of these nanofibers in the development of functional food products with improved nutritional profiles.

Formulation and Evaluation of Ethosomal Cream containing Resveratrol for the Treatment of Contact Dermatitis

Objective: The aim of this study was to formulate and evaluate ethosomal cream containing resveratrol for the treatment of contact dermatitis. Method: Resveratrol-loaded ethosome was prepared using cold method. The prepared ethosomes were assessed for entrapment efficiency (%), TEM analysis and sedimentation rate to determine the optimal formulation for loading into cream base. The selected formulation was further investigated for particle size distribution and zeta potential. A cream base was formulated using fusion and trituration method and selected for loading with the ethosomal suspension, meeting specification suitable for topical delivery. Ethosomal cream formulations were evaluated for drug content, ex -vitro diffusion by using goat skin, skin retention, microbiological study and stability study. Result and Discussion: The formulation E3 was selected for loading in the optimized cream base (F4) to obtain a topical cream containing ethosomes of resveratrol. The release study reveals that release was controlled for the 24 hours. The drug release in buffer was less than 17% from all the formulations after 24 hours. The drug content of resveratrol in goat skin and cream remained in donor compartment indicates that the drug retention in skin was high in all the formulations, which is desirable for the topical formulations. The best possible release kinetics of the formulation loaded with resveratrol containing ethosomes was found to be zero order. The ‘n’ value from Peppas’s model indicated that the drug release was by Fickian diffusion. Stability study indicates that all the cream formulations were stable after a time period of one month. Conclusion: The present study conclusively supported that ethosomal cream containing resveratrol to be an advantageous topical drug delivery system in treatment of ACD. However detail in- vivo study should be conducted in future to be justify the in- vitro study. Keywords: Resveratrol, Ethosome, Cream, Contact dermatitis.

Effects of molecular interactions on the release of small molecules from silicone rubber

AbstractSilicone rubber is a good candidate as a carrier of small molecules in such applications as drug, fragrance and semiochemical delivery. When one matrix is loaded, the molecular interactions between the molecules and the matrix may affect their release rates. For this reason, it is important to investigate the effects of molecular interactions on release to better develop delivery systems with desirable release rates. In this study, the mass transfer and diffusion coefficients of three model molecules (i.e., octanol, octyl acetate, and octyl butyrate) were determined by monitoring their release from silicone rubber sheets loaded using headspace gas chromatography–mass spectrometry. Differential scanning calorimetry was used to characterize the plasticizing effects and Fourier transform infrared spectroscopy was used to characterize the molecular interactions. It was found that the release of octanol conformed to the Fickian diffusion pattern at 1 wt% initial concentration but deviated as the concentration increased due to hydrogen bonding between octanol and the silanol group of the silica filler. When two small molecules were released simultaneously, the effects of one molecule on the diffusion coefficient of the other differed, a result explained by the competing effects of plasticizing and hydrogen bonding.

Diffusion in Porous Rock Is Anomalous.

Molecular diffusion of chemical species in subsurface environments─rock formations, soil sediments, marine, river, and lake sediments─plays a critical role in a variety of dynamic processes, many of which affect water chemistry. We investigate and demonstrate the occurrence of anomalous (non-Fickian) diffusion behavior, distinct from classically assumed Fickian diffusion. We measured molecular diffusion through a series of five chalk and dolomite rock samples over a period of about two months. We demonstrate that in all cases, diffusion behavior is significantly different than Fickian. We then analyze the results using a continuous time random walk framework that can describe anomalous diffusion in heterogeneous porous materials such as rock. This methodology shows extreme long-time tailing of tracer advance as compared to conventional Fickian diffusion processes. The finding that distinct anomalous diffusion occurs ubiquitously implies that diffusion-driven processes in subsurface zones should be analyzed using tools that account for non-Fickian diffusion.

Fabrication of chitosan-based smart film by the O/W emulsion containing curcumin for monitoring pork freshness

In this research, curcumin (Cur) was encapsulated in succinylated soy protein isolate (SSPI) emulsion and combined with chitosan (CS) to prepare a smart film. The good adsorption ability of SSPI at the oil-water interface provides good physical stability for preparing Cur-loaded emulsion. These CS smart films containing SSPI emulsions with different curcumin content were evaluated on the structure, mechanical, barrier, antioxidant, antibacterial properties, and controlled release behavior. SEM and FT-IR results showed that the Cur-loaded emulsion was compatible with the CS matrix. By adding the emulsion, the film blocked 97.11% of ultraviolet radiation, reduced the water vapor transmission rate by 42%, and improved the swelling degree (32.26%), water solubility (12%), thermal stability and elongation at break (70.79 %) (p < 0.05). In addition, the film has a high antibacterial effect on Staphylococcus aureus and Escherichia coli (Bacterial inhibition zone diameter: 19.59 mm and 18.66 mm) and the release rate of curcumin in the film reaches 82.60%, mainly following the Fickian diffusion. The film gradually turns red under alkaline conditions, a property that makes the films successful in monitoring the deterioration of pork during storage. Adding SSPI emulsions and curcumin to films has great potential for food freshness monitoring and packaging.

Synthesis and drug release kinetics of ciprofloxacin from polyacrylamide/dextran/carbon quantum dots (PAM/Dex/CQD) hydrogels

Sustainable release of drug by utilizing β-cyclodextrin (β-CD) based inclusion complex (IC) is the prime objective of the present work. Herein, polyacrylamide/dextran containing carbon quantum dots (PAM/Dex/CQD) nanocomposite hydrogels are prepared by in situ polymerization of acrylamide. The incorporation of CQD triggers the change in orientation of the PAM/Dex polymeric chains to result the formation of stacked surface morphology of the hydrogel. The average particle size of CQD is found to be 4.13 nm from HRTEM analysis. As-synthesized nanocomposite hydrogel exhibits an optimum swelling ratio of 863 % in aqueous medium. The cytotoxicity study is conducted on HeLa cells by taking up to 2 μM concentration of the prepared nanocomposite hydrogel demonstrate 78 % cell viability. In present study, ciprofloxacin (Cipro) is taken as model drug that achieves release of 64.15 % in 32 h from β-Cipro@PAM/Dex/CQD hydrogels in acidic medium. From theoretical study, release rate constants, R2, Akaike information criterion (AIC) and model selection criterion (MSC) are computed to determine the best fitted kinetics model. Peppas-Sahlin model is the best fitted kinetics model for β-Cipro@PAM/Dex/CQD and concluded that the release of Cipro follows Fickian drug diffusion mechanism in acidic medium.

A one-dimensional diffusive transport model to evaluate H2S generation in salt caverns hydrogen storage sites

Salt caverns are considered a potential hydrogen storage site given the ductility, tightness, and chemical inertness of halite. In addition, unlike porous media, salt caverns require less cushion gas and allow more cycles of injection and production within a year. However, hydrogen is an electron donor for many hydrogenotrophic microorganisms including halophilic sulfate-reducing microbes (SRM) and hydrogen sulfide (H2S) can be generated in a cavern once sulfate and hydrogen become available in the aqueous phase. As salt deposits are often associated with large amounts of impurities such as anhydrite and gypsum, their dissolution during the leaching phase can release the required sulfate ions for SRMs to produce H2S once hydrogen diffuses and dissolves in the brine at the bottom of the cavern. In this study, a one-dimensional diffusive transport model was developed using PHREEQC to simulate sulfate reduction and H2S generation in a cavern at the gas-brine interface. The solution of Fick's diffusion equation was used to calculate the hydrogen concentration at each level of the 1D model while the kinetic rates of reactions were derived from reported experimental and field site observations of brine samples taken from salt caverns. The results obtained indicated that hydrogen consumption at the gas-brine interface can trigger H2S and methane formations. This is followed by a reduction in sulfate and carbonate concentration and a slight increase in pH due to the reduction of protons in the solution. It was also observed that the presence of Fe2+ ions can reduce the amount of the hydrogen sulfide production while Ca2+ ions slightly favour sulfate reduction due to the production of methane. Although the kinetic reaction rate of the reactions in the model is subject to a certain degree of uncertainty, the workflow and results this study can serve as a guide for the future storage of hydrogen in salt caverns.

Crosslinked PVA-g-poly(AMPS) Nanogels for Enhanced Solubility and Dissolution of Ticagrelor: Synthesis, Characterization, and Toxicity Evaluation.

In this study, we synthesized PVA-g-poly(AMPS) nanogels with the aim of enhancing the solubility and dissolution of ticagrelor (TGR). Ticagrelor, a noncompetitive, reversible P2Y12 receptor antagonist, is prescribed to treat acute coronary syndrome. Ticagrelor has restricted oral bioavailability (≈36%) because of its poor solubility and permeability. The free radical polymerization methodology was employed to synthesize nanogels with varied concentrations of poly(vinyl alcohol) (polymer), 2-acrylamido-2-methylpropanesulfonic acid (monomer), and N,N-methylene bis(acrylamide) (crosslinker). The prepared nanogels were analyzed by swelling studies, % drug entrapment efficiency (DEE), solubility studies, in vitro drug release studies, zeta sizer, Fourier transform infrared (FTIR) spectroscopy, powder X-ray diffraction (PXRD), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and scanning electron microscopy (SEM). The optimized formulation (PA5) revealed a particle size of 45.86 nm, with a polydispersity index (PDI) of 0.41 and a %DEE of 85.1%. FTIR spectroscopy, XRD, and SEM confirmed the formation of crosslinked nanogels with amorphous and porous structures, and TGA/DSC proved their thermal stability. In vitro dissolution studies showed 99.91% drug release, and the ticagrelor solubility from the synthesized formulations was significantly improved up to 8.2-fold. All formulations followed the Korsmeyer-Peppas model with the Fickian diffusion as the release mechanism. The toxicity studies carried out on rats and the MTT assay on the Caco-2 cell line validated the biocompatibility of the nanogel formulations. The outcomes of the current study led to the conclusion that the PVA-g-poly(AMPS) nanogels synthesized by us could be used as dedicated pharmaceutical delivery systems to achieve enhanced solubility and dissolution of ticagrelor.

Fe3O4@MBT composite inhibitor for magnetic field sensitive controlled release and corrosion inhibition

Hollow porous Fe3O4 microspheres were prepared by citrate-assisted solvothermal method and used as nanocarrier, and then the 2-Mercaptobenzothiazole (MBT) inhibitor was encapsulated into the interior of Fe3O4 nanoparticles via vacuum negative pressure method. The results show that the obtained Fe3O4@MBT nanocomposite inhibitor has a MBT loading capacity of 13.831% and saturation magnetization of 68.7emu·g-1. Release study reveals the release of MBT inhibitor from the nanocomposites is mainly Fickian diffusion and diffusion among magnetic particles. The external magnetic field (MF) would effectively delay the release of inhibitor by increasing diffusion difficulty among magnetic particles. Additionally, the Fe3O4@MBT has an excellent inhibition effect for carbon steel, and the inhibition behavior can be regulated by MF.

Role of cyclodextrin inclusion complexes assembled in the fast-dissolving structures of electrospun gelatin mats to extend the release of menthol

In this study, inclusion complexes (ICs) of menthol with various cyclodextrins (CDs) [α-CD, β-CD, γ-CD, (2-hydroxypropyl)-β-cyclodextrin (HP-β-CD), and methyl-β-cyclodextrin (M-β-CD)] were prepared first, and then the ICs with the highest encapsulation efficiency were applied in electrospun gelatin mats to extend release of menthol. Electrospinning feed solutions in terms of surface tension, zeta potential, electrical conductivity, and rheological properties were evaluated. The diameter and morphology of the pure gelatin and the CDs-loaded gelatin mats were analyzed using microscopy (FESEM and AFM), which confirms that CDs loading leads to a decrease in the diameter of the nanofibers. The longest disintegration time belonged to the gelatin mat containing the β-CD complex. Comparison of the FTIR spectrum and XRD patterns of gelatin mats containing menthol-loaded CD complexes with the pure compounds confirmed the successful encapsulation of menthol inside the cavity of the CD, and also the disappearance of the crystalline state of electrospun gelatin mats. Applying the electrospun gelatin mats as a fast-dissolving structure for the menthol-loaded inclusion complexes increased its thermal stability. In the bioadhesieve test, the lowest force required to separate the gelatin mat from the skin model was obtained in the menthol-containing β-CD gelatin mat (6.21± 1.01 g). The menthol release from the pure gelatin mats was much faster than the electrospun mats containing CDs complexes, however the menthol-loaded β-CD gelatin mat showed the slowest release into the simulated saliva. Peppas-Sahlin and Fickian diffusion (Case-I) were the best-fitted model and menthol release mechanism, respectively.

A flexible, soft superabsorbent polyester-cotton blended fabric in-situ coated by poly(sodium acrylate-co-acrylic acid)

A novel pre-synthesized polymer is fabricated with sodium polyacrylate and acrylic acid through free radical polymerization. Interestingly, the pre-synthesized polymer is further polymerized on the polyester-cotton fabric in the presence of glycerol as a cross-linking agent forming superabsorbent fabric. The composite functional fabrics is prepared by two steps-synthesis and finishing process. Owing to the vital role of the viscosity of pre-polymer for the superabsorbent property, the effect of monomer concentration, temperature, time, dosage of initiator and degree of neutralization on the viscosity of pre-polymer is thoroughly investigated. Besides, the effects of the degree of neutralization and dosage of polymerization solution as well as cross-linking agent on the water absorption of the composite and unfinished polyester-cotton blended fabrics is compared. After treatment, the water absorption capacity increases from 1 to 323.52g/g in 1h, reaching a maximum value of 417.53g/g after 3.5h. Besides, the water transportation obeys a Fickian diffusion mechanism. Furthermore, the composite fabric exhibits an optimum water retention capacity of up to 4h. This speedy and super-water-absorbing material exhibits great potential in practical applications, such as in sanitary articles, wound dressings, and soil moisture.

Quality by design approach for fabrication of extended-release buccal films for xerostomia employing hot-melt extrusion technology

The study endeavors the fabrication of extended-release adipic acid (APA) buccal films employing a quality by design (QbD) approach. The films intended for the treatment of xerostomia were developed utilizing hot-melt extrusion technology. The patient-centered quality target product profile was created, and the critical quality attributes were identified accordingly. Three early-stage formulation development trials, complemented by risk assessment aligned the formulation and process parameters with the product quality standards. Employing a D-optimal mixture design, the formulations were systematically optimized by evaluating three formulation variables: amount of the release-controlling polymer Eudragit® (E RSPO), bioadhesive agent Carbopol® (CBP 971P), and pore forming agent polyethylene glycol (PEG 1500) as independent variables, and % APA release in 1, 4 and 8 h as responses. Using design of experiment software (Design-Expert®), a total of 16 experimental runs were computed and extruded using a Thermofisher ScientificTM twin screw extruder. All films exhibited acceptable content uniformity and extended-release profiles with the potential for releasing APA for at least 8 h. Films containing 30% E RSPO, 10% CBP 971P, and 20% PEG 1500 released 88.6% APA in 8 h. Increasing the CBP concentration enhanced adhesiveness and swelling capacities while decreasing E RSPO concentration yielded films with higher mechanical strength. The release kinetics fitted well into Higuchi and Krosmeyer-Peppas models indicating a Fickian diffusion release mechanism.

Comparative assessment of encapsulated essential oils through the innovative electrohydrodynamic processing and the conventional spray drying, and freeze-drying techniques

This study evaluates the encapsulation of an essential oils blend (EOB) using electrohydrodynamic processing (EHDP), spray drying, and freeze-drying techniques. EOB, comprising oregano, rosemary, hypericum, and chamomile oils, was encapsulated in a whey protein isolate-pullulan (WPI-PL) matrix. Spray drying achieved the highest encapsulation efficiency (EE > 90%) and optimal release profiles, while electrospun structures showed gradual release and better preservation. Freeze-drying exhibited the highest encapsulation yield (EY = 83.16%) but lower efficiency (~66%). The electrospun nanostructures (EHDP) had a diameter of 543.00 ± 15.86 nm, whereas spray-dried microparticles measured 4.91 ± 3.356 μm. All encapsulated structures followed a Fickian diffusion mechanism (n ≤ 0.45). This research highlights the potential of natural bioactive compounds in food applications, contributing to sustainable, synthetic-free nutrition by enhancing stability and bioactivity of essential oils through encapsulation, reducing reliance on synthetic additives, and promoting a more natural approach to modern nutrition.

Influence of salinity gradients on the diffusion of water and ionic species in dual porosity clay samples

Most of the available data on diffusion in natural clayey rocks consider tracer diffusion in the absence of a salinity gradient despite the fact that such gradients are frequently found in natural and engineered subsurface environments. To assess the role of such gradients on the diffusion properties of clayey materials, through-diffusion experiments were carried out in the presence and absence of a salinity gradient using salt-diffusion and radioisotope tracer techniques. The experiments were carried out with vermiculite samples that contained equal proportions of interparticle and interlayer porosities so as to assess also the role played by the two types of porosities on the diffusion of water and ions. Data were interpreted using both a classical Fickian diffusion model and with a reactive transport code, CrunchClay that can handle multi-porosity diffusion processes in the presence of charged surfaces. By combining experimental and simulated data, we demonstrated that (i) the flux of water diffusing through vermiculite interlayer porosity was minor compared to that diffusing through the interparticle porosity, and (ii) a model considering at least three types of porous volumes (interlayer, interparticle diffuse layer, and bulk interparticle) was necessary to reproduce consistently the variations of neutral and charged species diffusion as a function of salinity gradient conditions.

Facile construction of pectin-based hesperidin microcapsules: Solubilization, stability, loading process, and release mechanism

Constructing carrier materials with polysaccharides to enhance the solubility of insoluble active ingredients is a crucial strategy for improving bioavailability. This research constructed pectin-based hesperidin microcapsules (PHM) through self-assembly processes in the deep eutectic solvent, improving the solubility, storage stability, and bioavailability of hesperidin (HES). PHM exhibited high encapsulation efficiency (91.7%) and loading capacity (11.5%), with a small particle size (1.73 μm). The interaction mechanism was clarified through physical characterization and density functional theory (DFT) calculations. The vitro release demonstrated that the release ratio of PHM was only 6.4% in simulated gastric fluid (SGF), but reached 80.9% in simulated intestinal fluid (SIF). The release mechanism of PHM in SGF followed Fickian diffusion, while in SIF followed skeleton dissolution diffusion with a stable rate. Furthermore, the cell cytotoxicity experiments confirmed the remarkable biocompatibility of PHM toward human colon cells, which suggested its potential application in food and pharmaceutical fields.

Statistical simplex centroid experimental design for evaluation of pectin, modified chitosan and modified starch as encapsulating agents on the development of vitamin E-loaded microparticles by spray-drying

Vitamin E encapsulation into biopolymer-based microparticles, obtained by spray-drying technology, was proposed to improve the encapsulation efficiency and the controlled release of fat-soluble vitamin. Binary and ternary blends of pectin, modified chitosan and modified starch, modified starch + modified chitosan, modified starch + pectin, modified chitosan + pectin and modified starch + modified chitosan + pectin ((0.33, 0.33, 0.33), (0.70, 0.15, 0.15), (0.15, 0.70, 0.15) and (0.15, 0.15, 0.70)) were proposed to produce and evaluate different carrier-based delivery systems. Vitamin E-loaded microparticles and empty microparticles were created with a product yield between 9 and 49 %. The mean diameter among all microparticles varied between 3.74 ± 0.02 and 421 ± 21 μm (differential volume distribution). Oval, spherical or irregular microparticles, with a variable morphology from a smooth to a high rough surface structure, with concavities, were produced. All vitamin E-loaded microparticles exhibited an encapsulation efficiency higher than 70 %. The slower vitamin E controlled release was observed from microparticles composed by modified chitosan (>36 h), while the faster release was achieved from microparticles individually composed by pectin (39 min). In general, the Fickian diffusion is the main release mechanism involved in the microparticles produced with modified chitosan, other formulations combine also other mechanisms such as swelling.

Hierarchically Coupled Ornstein–Uhlenbeck Processes for Transient Anomalous Diffusion

The nonlinear dependence of the mean-squared displacement (MSD) on time is a common characteristic of particle transport in complex environments. Frequently, this anomalous behavior only occurs transiently before the particle reaches a terminal Fickian diffusion. This study shows that a system of hierarchically coupled Ornstein–Uhlenbeck equations is able to describe both transient subdiffusion and transient superdiffusion dynamics, as well as their sequential combinations. To validate the model, five distinct experimental, molecular dynamics simulation, and theoretical studies are successfully described by the model. The comparison includes the transport of particles in random optical fields, supercooled liquids, bedrock, soft colloidal suspensions, and phonons in solids. The model’s broad applicability makes it a convenient tool for interpreting the MSD profiles of particles exhibiting transient anomalous diffusion.