Ferroelectric Perovskite Research Articles

A Melt-Processable Metal Halide Perovskite Ferroelectric.

Molecular ferroelectrics have increasingly garnered significant attention in both fundamental scientific research and technological applications due to their ease of processing, lightweight nature, and mechanical flexibility. Among these, metal halide perovskite ferroelectrics (MHP FEs), a subset of molecule-based ferroelectrics, exhibit diverse functionalities owing to their distinctive structures, thus emerging as a focal point of molecular ferroelectrics research. However, thin films, the predominant application form for MHP FEs, primarily rely on spin-coating, which presents considerable limitations. The development of melt-processable MHP FEs has been sparse, largely due to the challenge of integrating ferroelectricity with meltability. In this context, we propose a rational strategy for the successful synthesis of a melt-processable MHP FE, (MBPA)2PbBr4 (MBPA = N-methyl bromopropylammonium), featuring a notably low congruent melting temperature and excellent molten stability. The reversibility of solid and liquid states was demonstrated by X-ray diffraction and Raman and IR spectrum. Scanning electron microscopy examinations show a better quality of the melt-processed thin films compared to spin-coated ones. This study marks the successful implementation of integrating ferroelectricity and melt-processability into melt-processable MHP FEs, paving the way for a novel approach in processing MHP FEs and facilitating their future applications.

Photo-ferroelectric perovskite interfaces for boosting VOC in efficient perovskite solar cells

Interface engineering is the core of device optimization, and this is particularly true for perovskite photovoltaics (PVs). The steady improvement in their performance has been largely driven by careful manipulation of interface chemistry to reduce unwanted recombination. Despite that, PVs devices still suffer from unavoidable open circuit voltage (VOC) losses. Here, we propose a different approach by creating a photo-ferroelectric perovskite interface. By engineering an ultrathin ferroelectric two-dimensional perovskite (2D) which sandwiches a perovskite bulk, we exploit the electric field generated by external polarization in the 2D layer to enhance charge separation and minimize interfacial recombination. As a result, we observe a net gain in the device VOC reaching 1.21 V, the highest value reported to date for highly efficient perovskite PVs, leading to a champion efficiency of 24%. Modeling depicts a coherent matching of the crystal and electronic structure at the interface, robust to defect states and molecular reorientation. The interface physics is finely tuned by the photoferroelectric field, representing a new tool for advanced perovskite device design.

Durable Photo-Pyroelectric Detection in a Diamine-Constructed Lead-Free Hybrid Perovskite Ferroelectric.

As a subcategory of pyroelectric materials, hybrid perovskite ferroelectrics possess substantial pyroelectric properties and exceptional light absorption characteristics, demonstrating significant potential in the photo-pyroelectric (PPE) detection field. Despite the significant advantages of hybrid perovskite ferroelectric materials for PPE detection, both the lead issue and the weak stability from van der Waals interactions in monoamines have hindered their further application. Here, 1D lead-free ferroelectric (BDA)SbBr5 (1, where BDA is 1,4-butanediammonium) is fabricated to achieve PPE detection. Compound 1 exhibits significant symmetry breaking attributed to the order-disorder transition of organic cations and octahedral distortions. Specifically, compound 1 enables broad-spectrum PPE detection from UV to near-infrared (377-980nm) and further realizes switchable pyroelectric current after polarization. More importantly, the stability of the pyroelectric current is preserved without degradation over three months, attributed to the hydrogen bonding interactions of butanediamide. Further theoretical calculations of compound 1 reveal a more negative energy of formation than its monoamine homologs (BA)2SbBr5 (where BA is n-butylammonium), which is evidence of its stability. These findings highlight 1 as a promising candidate for high-stability and environmentally friendly PPE wide-spectrum detection, representing a noteworthy advancement in the ferroelectric field.

Ultra-High-k Ferroelectric BaTiO3 Perovskite in the Gate Stack for Two-Dimensional WSe2 p-Type High-Performance Transistors.

The experimental demonstration of a p-type 2D WSe2 transistor with a ferroelectric perovskite BaTiO3 gate oxide is presented. The 30 nm thick BaTiO3 gate stack shows a robust ferroelectric hysteresis with a remanent polarization of 20 μC/cm2 and further enables a capacitance equivalent thickness of 0.5 nm in the hybrid WSe2/BaTiO3 stack due to its high dielectric constant of 323. We demonstrate one of the best ON currents for perovskite gate 2D transistors in the literature. This is enabled by high-quality epitaxial growth of BaTiO3 and a single 2D layer transfer based fabrication method that is shown to be amenable to silicon platforms. This demonstration is an important milestone toward the integration of crystalline complex oxides with 2D channel materials for scaled CMOS and low-voltage ferroelectric logic applications.

Unusual Triple-State Switching of Thermally Induced Birefringence in a Two-Dimensional Perovskite Ferroelectric.

Birefringent crystals hold a significant position in optical and optoelectronic fields due to their capability to control polarized light. Despite various chemical strategies devoted to designing birefringent crystals, it remains a challenge to switch and manipulate birefringence under physical stimuli. Here we present an unusual triple-state switching of birefringence in a 2D perovskite ferroelectric, (N-methylcyclohexylammonium)2PbCl4 (1), which exhibits two reversible phase transitions at 361 and 373 K. The in-plane birefringence of 1 (Δnbc) shows three distinctive states inside the bc plane, namely, the low-, high-, and zero-Δnbc states. Strikingly, a huge augmentation of Δnbc is solidly confirmed up to ∼400% between its low and high states, far beyond other birefringent materials. The origin of this triple-state switching of birefringence involves the variation of the ferroelastic strain and domain in the vicinity of the phase transition. As an entirely new mode of switching birefringence, this work facilitates the further development of new intelligent nonlinear optics.

Deciphering the Effect of Defect Dipoles on the Polarization and Electrostrain Behavior in Perovskite Ferroelectrics.

Defect dipoles are crucial for regulating electromechanical properties in piezoelectric ceramics, but their effects on polarization and electrostrain behaviors are still unclear. Here, a reasonable theoretical model is proposed and evidenced by experiments to address a long-standing puzzle of the relationship between the internal bias field and defect dipoles. By incorporating the additional polarization induced by defect dipoles, we refine the classical theory to account for the recently reported asymmetric giant-strain behaviors. Phase-field simulation reveals the electrostrain evolution in response to defect dipole elastic distortion and additional polarization. This work not only elucidates the effect of defect dipoles on polarization and electrostrain but also advances the theoretical understanding of defects in piezoelectrics.

Engineered Composite Interfacial Electric Field Boosts Piezocatalysis of Perovskite Ferroelectrics.

Reducing the level of annihilation of electrons and holes is considered to be a feasible strategy to promote piezocatalytic activities. But this strategy is only achieved through cumbersome sample preparation technologies, hindering its practical applications. Herein, we introduce a simple and efficient technique, the conventional solid-state method, to engineer a composite interfacial electric field to solve this problem, and validate it in a composite piezocatalysis composed of potassium sodium niobate ((K, Na)NbO3, KNN) and multiwalled carbon nanotubes (MWCNTs). The KNN-1CNT sample, a piezocatalyst doped with 1 wt % MWCNTs, shows a degradation rate (k) of 127 × 10-3 min-1 for Rhodamine B (RhB) dye and a hydrogen peroxide (H2O2) production rate of 36 μmol/h, about 27 times more than a reported ferroelectric composite piezocatalyst. The excellent piezocatalytic activities are attributed to the good crystallinity, slightly increased oxygen vacancies, and especially the optimal composite interface electric field. Therefore, our proposed method provides a paradigm for obtaining large-scale perovskite piezocatalysts with high piezocatalytic activities.

Understanding surfaces and interfaces in nanocomposites of silicone and barium titanate through experiments and modeling

AbstractBarium titanate (BTO) is a ferroelectric perovskite used in electronics and energy storage systems because of its high dielectric constant. Decreasing the BTO particle size was shown to increase the dielectric constant of the perovskite, which is an intriguing but contested result. We investigated this result by fabricating silicone-matrix nanocomposite specimens containing BTO particles of decreasing diameter. Furthermore, density functional theory modeling was used to understand the interactions at the BTO particle surface. Combining results from experiments and modeling indicated that polymer type, particle surface interactions, and particle surface structure can influence the dielectric properties of polymer-matrix nanocomposites containing BTO. Graphical abstract

Synergistic Effect of Ionic Liquid and Embedded QDs on 2D Ferroelectric Perovskite Films with Narrow Phase Distribution for Self-Powered and Broad-Band Photodetectors.

2D layered metal halide perovskites (MHPs) are a potential material for fabricating self-powered photodetectors (PDs). Nevertheless, 2D MHPs produced via solution techniques frequently exhibit multiple quantum wells, leading to notable degradation in the device performance. Besides, the wide band gap in 2D perovskites limits their potential for broad-band photodetection. Integrating narrow-band gap materials with perovskite matrices is a viable strategy for broad-band PDs. In this study, the use of methylamine acetate (MAAc) as an additive in 2D perovskite precursors can effectively control the width of the quantum wells (QWs). The amount of MAAc greatly affects the phase purity. Subsequently, PbSe QDs were embedded into the 2D perovskite matrix with a broadened absorption spectrum and no negative effects on ferroelectric properties. PM6:Y6 was combined with the hybrid ferroelectric perovskite films to create a self-powered and broad-band PD with enhanced performance due to a ferro-pyro-phototronic effect, reaching a peak responsivity of 2.4 A W-1 at 940 nm.

Coexistence and Interplay of Two Ferroelectric Mechanisms in Zn1-xMgxO.

Ferroelectric materials promise exceptional attributes including low power dissipation, fast operational speeds, enhanced endurance, and superior retention to revolutionize information technology. However, the practical application of ferroelectric-semiconductor memory devices has been significantly challenged by the incompatibility of traditional perovskite oxide ferroelectrics with metal-oxide-semiconductor technology. Recent discoveries of ferroelectricity in binary oxides such as Zn1-xMgxO and Hf1-xZrxO have been a focal point of research in ferroelectric information technology. This work investigates the ferroelectric properties of Zn1-xMgxO utilizing automated band excitation piezoresponse force microscopy. This findings reveal the coexistence of two ferroelectric subsystems within Zn1-xMgxO. A "fringing-ridge mechanism" of polarization switching is proposed that is characterized by initial lateral expansion of nucleation without significant propagation in depth, contradicting the conventional domain growth process observed in ferroelectrics. This unique polarization dynamics in Zn1-xMgxO suggests a new understanding of ferroelectric behavior, contributing to both the fundamental science of ferroelectrics and their application in information technology.

Atomic Layer Engineering of Ferroelectricity in Dion-Jacobson Perovskites.

Recent advances in "hybrid-improper" ferroelectricity in Dion-Jacobson (DJ)-type layered perovskites have caused renewed interest in the search for new ferroelectrics. Here, we present an approach for the tailored synthesis of a new homologous series of DJ-type layered perovskites Cs(Bi2Srn-3)(Tin-1Nb)O3n+1. Starting from CsBi2Ti2NbO10 (n = 3), higher-order homologous phases with n = 4 and 5 were successfully synthesized by repeated solid-state calcination with SrTiO3. Characterizations by X-ray diffraction, electron diffraction, transmission electron microscopy, Raman scattering, and second harmonic generation showed the detailed structural features in Cs(Bi2Srn-3)(Tin-1Nb)O3n+1, and the polar structures could be stabilized by proper or hybrid-improper ferroelectricity, depending on the odd or even number of the perovskite layers. Our results provide important insights into the competition between the different mechanisms and the consequences of the ferroelectric properties in homologous layered perovskites.

Switchable Bulk Photovoltaic Effect in Intrinsically Ferroelectric 3D All-Inorganic CsPbBr3 Perovskite Nanocrystals.

Ferroelectric all-inorganic halide perovskite nanocrystals with both spontaneous polarization and visible light absorption are promising candidates for designing ferroelectric photovoltaic applications. It remains a challenge to realize ferroelectric photovoltaic devices with all-inorganic halide perovskites that can be operated in the absence of an external electric field. Here we report that a popular all-inorganic halide perovskite nanocrystal, CsPbBr3, exhibits a ferroelectricity-driven photovoltaic effect under visible light in the absence of an external electric field. Pristine CsPbBr3 nanocrystals exhibit intrinsic ferroelectric key properties with a notable saturated polarization of ∼0.15 μC/cm2 and a high Curie temperature of 462 K, driven by the stereochemical activity of the Pb(II) lone pair. Furthermore, application of an external electric field allows the photovoltaic effect to be enhanced and the spontaneous polarization to be switched with the direction of the electric field. CsPbBr3 nanocrystals exhibit a robust fatigue performance and a prolonged photoresponse under continuous illumination in the absence of an external electric field. These findings establish all-inorganic halide perovskite nanocrystals as potential candidates for designing photoferroelectric devices by coupling optical functionalities and ferroelectric responses.

Metal-Free Perovskite Ferroelectrics with the Most Equivalent Polarization Axes.

Ferroelectricity in metal-free perovskites (MFPs) has emerged as an academic hotspot for their lightweight, eco-friendly processability, flexibility, and degradability, with considerable progress including large spontaneous polarization, high Curie temperature, large piezoelectric response, and tailoring coercive field. However, their equivalent polarization axes as a key indicator are far from enough, although multiaxial ferroelectrics are highly preferred for performance output and application flexibility that profit from as many equivalent polarization directions as possible with easier reorientation. Here, by implementing the synergistic overlap of regulating anionic geometries (from spherical I- to octahedral [PF6]- and to tetrahedral [ClO4]- or [BF4]-) and cationic asymmetric modification, we successfully designed multiaxial MFP ferroelectrics CMDABCO-NH4-X3 (CMDABCO = N-chloromethyl-N'-diazabicyclo[2.2.2]octonium; X = [ClO4]- or [BF4]-) with the lowest P1 symmetry. More impressively, systemic characterizations indicate that they possess 24 equivalent polarization axes (Aizu notations of 432F1 and m3̅mF1, respectively)─the maximum number achievable for ferroelectrics. Benefiting from the multiaxial feature, CMDABCO-NH4-[ClO4]3 has been demonstrated to have excellent piezoelectric sensing performance in its polycrystalline sample and prepared composite device. Our study provides a feasible strategy for designing multiaxial MFP ferroelectrics and highlights their great promise for use in microelectromechanical, sensing, and body-compatible devices.

Mn-inlaid antiphase boundaries in perovskite structure

Improvements in the polarization of environmentally-friendly perovskite ferroelectrics have proved to be a challenging task in order to replace the toxic Pb-based counterparts. In contrast to common methods by complex chemical composition designs, we have formed Mn-inlaid antiphase boundaries in Mn-doped (K,Na)NbO3 thin films using pulsed laser deposition method. Here, we observed that mono- or bi-atomic layer of Mn has been identified to inlay along the antiphase boundaries to balance the charges originated from the deficiency of alkali ions and to induce the strain in the KNN films. Thus, rectangular saturated polarization-electric field hysteresis loops have been achieved, with a significantly improved twice remanent polarization of 114 μC/cm2 with an applied electric field of 606 kV/cm, which can be comparable to that of the typical Pb-based thin films. Moreover, we directly see the Mn occupation at the A-site of KNN perovskite structure using atomic-scale microstructure and composition analysis. The Mn-inlaid antiphase boundary can further enrich the understanding of perovskite crystal structure and give more possibilities for the design and optimization of perovskite materials.

Strong Electrostatic Control of Excitonic Features in MoS2 by a Free‐Standing Ultrahigh‐κ Ferroelectric Perovskite

AbstractIntegrating free‐standing complex oxides with two‐dimensional (2D) materials has recently attracted great interest, due to the rich physics evolving from such structures. Enhancing and tuning the opto–electronic properties of these systems is of high importance for a multitude of applications, such as sensors, memory devices or optical communications. The electrostatic control of photoluminescence of monolayer MoS2 at room temperature via integration of free‐standing BaTiO3 (BTO), a ferroelectric perovskite oxide is presented. It is shown that the use of BTO leads to highly tunable exciton emission of MoS2 in a minimal range of gate voltages. Due to BTO's ferroelectric polarization‐induced doping, large peak emission shifts as well as a large and tunable A trion binding energy in the range of 40–100 meV are observed. These measurements are compared with those carried out when the BTO is replaced by a hexagonal boron nitride (hBN) dielectric layer, confirming BTO's superior gating properties and thus lower power consumption. Additionally, advantage of the ferroelectric switching of BTO is taken by fabricating devices where the BTO layer is decoupled from the gate electrode with a SiO2 layer. Choosing to isolate the BTO allows to induce large remanent behavior of MoS2’s excitonic features.

Multi-Axial Self-Driven X-Ray Detection by a Two-Dimensional Biaxial Hybrid Organic-Inorganic Perovskite Ferroelectric.

Metal halide perovskite ferroelectrics combining spontaneous polarization and excellent semiconducting properties is an ideal platform for enabling self-driven X-ray detection. However, achievements to date have been only based on uniaxiality, which increases the complexity of device fabrication. Multi-axial ferroelectric materials have multiple equivalent polarization directions, making them potentially amenable to multi-axial self-driven X-ray detection, but the report on these types of materials is still a huge blank. Herein, a high-quality (BA)2(EA)2Pb3I10 (1) biaxial ferroelectric single crystal was successfully grown, which exhibited significant spontaneous polarization along the c-axis and b-axis. Under X-ray irradiation, bulk photovoltaic effect (BPVE) was exhibited along both the c-axis and b-axis, with open circuit voltages (Voc) of 0.23 V and 0.22 V, respectively. Then, the BPVE revealed along the inversion of polarized direction with the polarized electric fields. Intriguingly, due to the BPVE of 1, 1 achieved multi-axial self-driven X-ray detection for the first time (c-axis and b-axis) with relatively high sensitivities and ultralow detection limits (17.2 nGyair s-1 and 19.4 nGyair s-1, respectively). This work provides a reference for the subsequent use of multi-axial ferroelectricity for multi-axial self-driven optoelectronic detection.

Effects of quenching on domain switching and electric field-induced phase transformations in Na0.5Bi0.5TiO3-NaNbO3 ceramics

Quenching from high temperatures has been identified as a useful means to enhance the piezoelectric properties and thermal stability of bismuth-based perovskite ferroelectrics. In the present work, it is demonstrated that quenching leads to improvement of depolarization temperature, ferroelectric and piezoelectric properties in Na0.5Bi0.5TiO3-NaNbO3 (NBT-0.1NN) ceramics. In-situ synchrotron x-ray diffraction measurements indicated an irreversible transformation from cubic to coexisting cubic and rhombohedral phases during the application of a high electric field, for both as-sintered and quenched ceramics. These results confirm the non-ergodic relaxor ferroelectric nature of the materials. DC poling induced a transformation to single-phase rhombohedral structure in both cases, with highly textured domain configurations. These well-oriented ferroelectric domain states were relatively stable under subsequent bipolar electric field cycling. For the pre-poled NBT-0.1NN ceramics, the quenched samples were found to exhibit the highest intrinsic (lattice strain) and extrinsic (domain switching) contributions to electrostrain, due to the increased rhombohedral distortion.

Ferroelectric perovskite PbTiO3 for advanced photocatalysis

Ferroelectric perovskite PbTiO3 for advanced photocatalysis

Defects and oxygen impurities in ferroelectric wurtzite Al1−xScxN alloys

III-nitrides and related alloys are widely used for optoelectronics and as acoustic resonators. Ferroelectric wurtzite nitrides are of particular interest because of their potential for direct integration with Si and wide bandgap semiconductors and unique polarization switching characteristics; such interest has taken off since the first report of ferroelectric Al1−xScxN alloys. However, the coercive fields needed to switch polarization are on the order of MV/cm, which are 1–2 orders of magnitude larger than oxide perovskite ferroelectrics. Atomic-scale point defects are known to impact the dielectric properties, including breakdown fields and leakage currents, as well as ferroelectric switching. However, very little is known about the native defects and impurities in Al1−xScxN and their effect on the dielectric and ferroelectric properties. In this study, we use first-principles calculations to determine the formation energetics of native defects and unintentional oxygen incorporation and their effects on the polarization switching barriers in Al1−xScxN alloys. We find that nitrogen vacancies are the dominant native defects, and unintentional oxygen incorporation on the nitrogen site is present in high concentrations. They introduce multiple mid-gap states that can lead to premature dielectric breakdown and increased temperature-activated leakage currents in ferroelectrics. We also find that nitrogen vacancy and substitutional oxygen reduce the switching barrier in Al1−xScxN at low Sc compositions. The effect is minimal or even negative (increases barrier) at higher Sc compositions. Unintentional defects are generally considered to adversely affect ferroelectric properties, but our findings reveal that controlled introduction of point defects by tuning synthesis conditions can instead benefit polarization switching in ferroelectric Al1−xScxN at certain compositions.

Electrically Induced Crystal Field Distortion in a Ferroelectric Perovskite Revealed by Electron Paramagnetic Resonance.

The magnetoelectric material has attracted multidisciplinary interest in the past decade for its potential to accommodate various functions. Especially, the external electric field can drive the quantum behaviors of such materials via the spin-electric coupling effect, with the advantages of high spatial resolution and low energy cost. In this work, the spin-electric coupling effect of Mn2+-doped ferroelectric organic-inorganic hybrid perovskite [(CH3)3NCH2Cl]CdCl3 with a large piezoelectric effect was investigated. The electric field manipulation efficiency for the allowed transitions was determined by the pulsed electron paramagnetic resonance. The orientation-included Hamiltonian of the spin-electric coupling effect was obtained via simulating the angle-dependent electric field modulated continuous-wave electron paramagnetic resonance. The results demonstrate that the applied electric field affects not only the principal values of the zero-field splitting tensor but also its principal axis directions. This work proposes and exemplifies a route to understand the spin-electric coupling effect originating from the crystal field imposed on a spin ion being modified by the applied electric field, which may guide the rational screening and designing of hybrid perovskite ferroelectrics that satisfy the efficiency requirement of electric field manipulation of spins in quantum information applications.