Fault Segments Research Articles

Injection-induced basement seismicity beneath the Raton Basin: constraints from refined fault architectures and basin structure.

Intraplate earthquakes induced by anthropogenic fluid injection present unexpected seismic risk to previously quiescent or low seismicity-rate regions. Despite many studies of induced seismicity, there are relatively few with detailed openly accessible constraints on the interaction between seismic sources and subsurface structures. In this study of the Raton Basin, we refine source observations from a dense nodal array and constrain basin structure using teleseismic receiver functions. The cross-correlation-based relocated hypocentres and a new set of focal mechanisms light up active fault segments and show clear spatiotemporal patterns. The geometric complexity of reactivated fault clusters appears greatest near higher rate injection wells. Simpler normal fault structure is found farther from injection wells and near abrupt structural transitions suggested by receiver functions. While less induced seismicity in the crystalline basement is expected when injection is >1 km from the top of the basement (like Raton), our receiver function analysis identified a basin thickness ~3 km beneath the nodal array and lateral variations in sedimentary structures. Our results explain potential fluid connectivity between the injection depths focused at ~1-1.5 km below the surface and basement fault activity that begins at ~3 km and reaches peak activity at ~4-8 km depths. This article is part of the theme issue 'Induced seismicity in coupled subsurface systems'.

Tectono‐sedimentary evolution of high‐displacement crustal‐scale normal faults and basement highs on rifted margins: Klakk Fault Complex and Frøya High, Mid‐Norwegian Margin

AbstractCrustal‐scale high‐displacement (>10 km) normal faults are not captured in existing tectono‐sedimentary models of rift basins. We used 2D and 3D seismic reflection and well data to perform a structural and source‐to‐sink analysis of the southern part of the Klakk Fault Complex and the western part of the Vingleia Fault Complex, Mid‐Norwegian rifted margin. The north–south trending Klakk Fault Complex has a zig‐zag to sinuous plan‐view geometry, forming a series of structural recesses and salients along strike. In cross‐section, the fault complex has a listric to convex‐up or low‐angle planar geometry with displacements above 20 km. This fault complex exhumed basement highs, the Frøya High and Sklinna Ridge, in its footwall and created a series of supradetachment basins, for example, the Rås Basin, in its hanging wall. In contrast, the northeast‐southwest trending Vingleia Fault Complex has a zig‐zag geometry in plan view and planar to listric geometry in cross‐section and displacement of up to 5 km. This fault has the Frøya High in its footwall and the southern Halten Terrace in its hanging wall. Restoration of selected structural cross‐sections shows a prominent fault‐parallel ridge, up to 15 km east of the Klakk Fault Complex interpreted as a palaeodrainage divide. This divide separates steep drainages developed along the west‐dipping footwall scarp to the Klakk Fault Complex, from broader, gentler east‐dipping drainages up to ca. 10 km long developed on a back‐tilted dip slopes along the eastern side of the Frøya High and Sklinna Ridge. Progressive headward erosion of active flank catchments was enhanced around topographically elevated structural salients to the point of capturing previous dip‐slope‐directed drainages during the earliest Cretaceous. A network of submarine canyons develop down‐dip of the drainage catchments along the Klakk Fault Complex scarp, whose geometries and length are controlled by their location with respect to the structural salients or recesses, and the presence of fault terraces. The middle Jurassic‐earliest Cretaceous synrift deposits form two seismic sequences that are filled with five distinctive seismic facies that record the evolution from a linked normal fault during rift climax to a high‐displacement stage. During the high displacement stage, exhumed local continental core complexes formed structural salients, separated along strike by structural recesses at the heads of supradetachment basins. Key elements of the high‐displacement fault stage include (i) the development of structural salients at sites of rift climax displacement maxima, (ii) development of supradetachment basins in rift climax displacement minima and (iii) migration of major depocentres away from the centre of rift climax fault segments. We synthesise these observations into a generic tectono‐sedimentary model for high‐displacement faults.

Differential Characteristics of Conjugate Strike-Slip Faults and Their Controls on Fracture-Cave Reservoirs in the Halahatang Area of the Northern Tarim Basin, NW China

The X-type strike-slip fault system and weathering crust karst fracture-cave and channel reservoirs were developed in the Halahatang area of the northern Tarim Basin. However, the relationship between the reservoir and the strike-slip fault remains controversial. Based on the core data, and taking an NE-striking strike-slip fault as an example, this paper dissects the karst reservoir from wells along the strike-slip fault damage zone and analyzes the control of scales, properties, and segmentation styles of strike-slip faults on karst reservoirs. The results show that (1) the scale of the strike-slip fault controls the distribution of the reservoir—the wider the fault damage zone, the wider the fracture-cave reservoirs; (2) the transtensional segments of the strike-slip fault are more likely to produce karstification, and the buried-hill area and the interbedded area are controlled by different hydrodynamic conditions to form different types of karst reservoirs; (3) six different parts of the strike-slip fault are conducive to the formation scale of fault fracture zones. This research provides new insight into recognizing karst reservoirs within strike-slip fault damage zones, which can be further applied to predict karst reservoirs controlled by strike-slip faults.

Numerical simulation of stress evolution and seismic moment budget along the central segments of the Xianshuihe-Xiaojiang fault system: Implications for seismic hazard assessment

The central segments of the Xianshuihe-Xiaojiang fault system (CSXXFS), which intersect densely populated areas, have remained seismically quiet without any strong earthquakes of M ≥ 7 for nearly two centuries. As such, conducting a comprehensive seismic hazard assessment of the CSXXFS serves as a crucial component of disaster mitigation efforts. To achieve this, we developed a finite element model that integrates heterogeneous mechanical properties constrained by interseismic deformation to estimate the fault locking depths within the CSXXFS. Subsequently, we performed an analysis of the seismic moment budget and Coulomb stress change to comprehensively assess the seismic hazards in the vicinity of the CSXXFS. Our findings revealed an overall average locking depth of 10 km for the Xianshuihe-Xiaojiang fault system (XXFS) and 15 km for the Daliangshan fault (DLSF). The discrepancy between the seismogenic depth and the fault locking depth indicates the presence of deep creep in certain segments of the CSXXFS. Additionally, historical earthquakes have caused stress modulation, resulting in potential earthquakes being either delayed or advanced in different segments of the CSXXFS. Specifically, the future seismic hazard is delayed in the entire Zemuhe fault (ZMHF), the northern segment of the Anninghe fault (ANHF), the southern section of the Shimian-Yuexi segment of the north Daliangshan fault (NDLSF), and the southernmost part of the south Daliangshan fault (SDLSF). Conversely, the potential earthquake on the Mianning-Xichang segment of the ANHF and the majority of the DLSF have been advanced due to positive earthquake-induced stress. Our estimation of the seismic budget suggests that the ANHF, ZMHF, NDLSF, and SDLSF have the potential to host earthquakes with magnitudes of M 6.9, M 7.3, M 7.4, and M 7.1, respectively. By adopting this integrated seismic hazard analysis, we highlight the necessity of closely evaluating potential risks and implementing appropriate mitigation strategies in this area.

Delineation and Fine‐Scale Structure of Fault Zones Activated During the 2014–2024 Unrest at the Campi Flegrei Caldera (Southern Italy) From High‐Precision Earthquake Locations

AbstractIn the past two decades, the central portion of Campi Flegrei caldera has experienced ground uplift up to 15 mm/month, with an increase of rate, magnitude and extent of the seismicity. In this work, we perform multi‐scale precise earthquake relocation of the 2014–2024 seismicity, mapping in detail activated fault zones. We relate the geometry, extent, and depth of these zones with up‐to‐date structural reconstructions of the caldera. The current seismicity is mainly driven by ground‐uplift‐induced stress concentration on pre‐existing, weaker fault zones, some of which identified for the first time. These structures are not only related to the inner caldera and dome resurgence but also to volcano‐tectonic events of the last 10 ka. The extent of imaged fault segments suggests they can accommodate ruptures up to a moment magnitude 5.1, significantly increasing seismic hazard in the area.

A method for seismic fault identification based on self-training with high-stability pseudo-labels

The imaging principle of seismic image is different from that of natural image. There are many problems on seismic images, such as limited resolution, complex reflection feature and strong uncertainty, which leads to significant difference in the research emphases of computer vision on seismic image. In response to the above issues, the semi-supervised semantic segmentation method based on self-training with high-stability pseudo-labels is proposed for seismic fault identification. Specifically, the self-training strategy Fault-Seg-ST is proposed to decouple Teacher–Student model predictions by adding random noise to unlabeled images. The selective retraining strategy Fault-Seg-SST is proposed to evaluate the reliability of pseudo-labels based on the stability of model predictions. The contrastive loss function is proposed to learn pixel-level feature representation with intra class affinity and inter class separability. The Fault-Seg-SST has achieved the optimal segmentation performance on both DeepLabV2 (Dice 86%, mIoU 77%) and UNet with ResNet 18 (Dice 83%, mIoU 76%). Experimental results show that the fault identification method based on self-training with high-stability pseudo-labels demonstrates the superiority of selective retraining strategy, and the fault identification model trained with Fault-Seg-SST strategy can achieve the fine-grained fault segmentation.

Complex Segment Linkage Along the Sevier Normal Fault, Southwestern Utah

Abstract Major normal fault systems are composed of segments that link as displacement accumulates, with linkage zone characteristics that reveal fault zone evolution. The steeply west-dipping Sevier fault zone in southwestern Utah, displays a complex fault network that developed between two long (>10 km), en echelon segments near the town of Orderville. Geologic map data and cross-sections of the transfer zone between the Mt. Carmel segment in the south and the Spencer Bench segment in the north reveal more than ten normal faults and four relay ramps displaying a range of geometries, including two relay ramps that display ramp-parallel folds. We suggest that transfer zone deformation was initially dominated by faults subparallel to the primary segments with later cross-faults that hard-linked these faults across most of the transfer zone. When the transfer zone was a soft-linked system, a displacement deficit likely existed relative to fault segments to the north and south. This early fault configuration would have reduced the efficiency of slip propagation associated with major earthquakes (>M7.0). In contrast, the present-day transfer zone, with a complex but hard-linked fault network, shows displacements that transition smoothly from the higher displacement (~800 m) southern segment to the lower displacement (~400 m) northern segment. That transition, combined with extensional strain within the zone, suggests that the Orderville fault network would be unlikely to impede propagation associated with future major earthquakes. The kinematic model of fault evolution presented here has implications for those investigating geothermal energy potential, groundwater flow, natural gas and oil reservoirs, mineral deposit formation, or seismic hazards.

Abnormal apparent supershear rupture with discontinuous jumping propagation during the 2023 Türkiye M7.8 earthquake

Earthquake ruptures along a single fault or along a connected system of faults are generally assumed to progress continuously. However, our analysis of the 2023 M7.8 Türkiye earthquake, using finite-fault joint source inversion, uncovered the occurrence of discontinuous rupture jumps. The main fault area adjacent to the splay fault where the earthquake started, and the deeper portion of the northeastern main fault segment exhibited triggered slip before the main rupture front arrived. Through seismic centroid analysis and finite-fault inversion, we estimated apparent rupture speeds within these slip patches reach approximately 6.0 km s-1, exceeding local S-wave velocity. The dynamic triggering mechanism induced the jumping rupture in these areas, resulting in an apparent rupture velocity surpassing the local shear wave velocity. These findings demonstrate the importance of dynamic triggering in adjacent fault systems during large earthquakes, influencing the extent and complexity of rupture propagation.

Structural inheritances, fault segmentation and seismogenic potential at the front of the eastern Southern Alps (central Carnic Prealps, NE Italy)

New geological and morphotectonic surface data coupled with the revision of the ENI-Exploration & Production seismic lines, made it possible to review the tectonic structure of the Pliocene-Quaternary front of the eastern Southern Alps in the area between the Cellina River and the Tagliamento River (central Carnic Prealps, NE Italy). The eastern Southern Alps are a SE-verging fold and thrust belt in activity from the middle Miocene to the Present. The presence of Paleogene structural inheritances influenced the current structural arrangement of the thrust-belt and the potential seismogenesis, supporting segmentation of the Neoalpine external front. In particular, the presence of the NW-SE trending Mt.Ciaurlec – Palmanova – Pozzuolo structural high, inherited from the W-ward propagation of the External Dinarides during Paleogene, generated lateral lithological facies change and influenced not only the undulation between the Neogene-Quaternary Maniago-Meduno and Toppo-Forgaria Thrusts, but also the segmentation of the outermost portion of the Neoalpine external front consisting into two segments with different geometric and structural characteristics: 1) the ENE-WSW striking Arba-Sequals segment that runs buried under the upper Pleistocene sequences of the piedmont Friuli plain; 2) the W-E Ragogna segment that shows widespread evidence of surface deformation of the Last Glacial Maximum (LGM) alluvial plain. In particular, the long-lasting activity of the Ragogna segment is testified by the late Miocene-Middle Pleistocene angular unconformities, forced drainage anomalies and tilted and uplifted Quaternary palaeosurfaces. A discussion on the seismogenic potential of the investigated structures is proposed.

A computational topology-based method for extracting fault surfaces

Fault surface extraction is a crucial step in seismic interpretation, which can help structural interpretation and structural modeling. A key focus of fault surface extraction research is to extract fault surfaces in their entirety as much as possible, rather than just in fault segments, which is more challenging in some complex fault situations. To address this challenge, we develop a fault surface extraction method based on computational topology to extract fault surfaces in their entirety as much as possible from a fault attribute and effectively handle some complex fault situations, such as intersecting faults. From a given seed point on the target fault, we use the idea of regional growth to search for high-confidence points on the target fault, called fault control points, under the constraints of the fault attribute and the calculated fault orientations. Through these fault control points, we extract the fault boundary and process the fault attribute so that only the target fault is included. Furthermore, we use an operation in computational topology called collapse to extract the target fault from the processed fault attribute using the fault boundary as a constraint. By incorporating fault orientation information and using a relatively large search distance during the control point search, our method enables the integration of segmented faults and facilitates the handling of complex fault situations such as intersecting faults. The collapse operation ensures that the extracted fault surfaces align with the fault attribute, correspond to the actual fault locations in seismic data, and enhance fault continuity. In addition, we develop an automatic method for picking seed points to realize the extraction of all the faults in the research data. We test our method on several field data sets and the experimental results demonstrate its effectiveness. In some complex fault situations, such as intersecting faults, our method performs well and indicates a significant improvement over the compared method.

Comprehensive Study on the 143 A.D. West Gangu Earthquake in the West Qinling Area, Northeastern Margin of Tibetan Plateau

The 143 A.D. west Gangu earthquake is documented to have occurred in the West Qinling area, which is located on the northeastern margin of the Tibetan Plateau. Initial limited historical records suggest the earthquake took place along the West Qinling fault (WQLF) in the western region of Gangu County. However, the absence of corresponding geological and geomorphological evidence has posed a considerable challenge in accurately quantifying parameters such as the precise location, magnitude, and seismogenic fault segment in earlier investigations. In this study, a comprehensive examination of multiple residual surface rupture zones within the macroseismic zone of this earthquake enabled the determination of the seismogenic structure, magnitude, and rupture zone scale through diverse methodologies, which include field geological investigations, chronology testing, Unmanned Aerial Vehicle (UAV) aerial surveying, and interpretation of landslides along the fault zone. The results reveal that the seismogenic structure of this seismic event is associated with the Zhangxian fault segment of the WQLF, also marked by a dense distribution of large landslides from Zhangxian to Yuanyangzhen. The epicenter was identified at the eastern end of the Zhangxian fault segment of the WQLF. Furthermore, the magnitude of the 143 A.D. west Gangu earthquake is estimated to be approximately Ms 7–7.3, with the residual surface rupture zone intermittently extending over about 22 km and a maximum horizontal dislocation along the rupture zone of 2.8 ± 0.5 m. This detailed investigation contributes foundational insights for further evaluating the seismic risk across various segments of the WQLF.

Turkish earthquake death tolls: lessons from downward counterfactual analysis and informal construction

Earthquake death tolls are a basic statistical measure of the capability of a country to manage seismic risk. The extremely high Turkish death toll of 50,000 from the Kahramanmaraş earthquake doublet of 6 February 2023 is the product of a cascade of detrimental factors. These need to be explained if lessons from this disaster are to be learned. This is the purpose and objective of this paper, which is a contribution to the interdisciplinary Frontiers research topic on integrated perspectives on the 2023 Turkey and Syria earthquakes: advancing understanding and preparedness across earth sciences, engineering and public health. This paper covers these three disciplines by focusing on casualties, and identifying crucial aspects of earth sciences and engineering which contributed to the high death toll. First, there was a surprising combination of multiple fault segment ruptures, and a high level of ground motion relative to the risk-based Turkish code, indicative of the under-representation of the M7.5+ earthquake doublet event in the national probabilistic seismic hazard model. This combination of fault segment ruptures was missing from all seismic source models. Furthermore, the capability of buildings to cope with strong ground motion was much reduced by informal construction methods, which eroded the margin of safety needed to avoid building collapse. The extent of building code non-compliance was widely underestimated in seismic risk models. Non-compliance is often hard to identify, but construction amnesties make non-compliance more transparent and trackable. The disastrous outcome of the Kahramanmaraş earthquake doublet of 6 February 2023 has drawn global attention to systemic building code non-compliance, and the open official acceptance of informal housing. To demonstrate that this key systemic risk is far from being just a Turkish problem, notably in Istanbul, the challenge of Italian informal housing is highlighted within the context of international building code non-compliance.

Mechanisms and Seismological Signatures of Rupture Complexity Induced by Fault Damage Zones in Fully‐Dynamic Earthquake Cycle Models

AbstractDamage zones are common around faults, but their effects on earthquake mechanics are still incompletely understood. Here, we investigate how damage affects rupture patterns, source time functions (STF) and ground motions in 2D fully‐dynamic cycle models. We find that back‐propagating rupture fronts emerge in large faults and can be triggered by residual stresses left by previous ruptures or by damage‐induced pulse‐to‐crack transitions. Damage‐induced back‐propagating fronts are modulated by slip rate oscillations, amplify high‐frequency radiation, and sharpen the multiple peaks in STF even in the absence of frictional heterogeneity or fault segmentation. Near‐field ground motion is predominantly controlled by stress heterogeneity left by prior seismicity, and further amplified within the damage zone by trapped waves and outside it by secondary rupture fronts. This study refines our knowledge on damage zone effects on earthquake rupture and identifies their potentially observable signatures in the near and far field.

Frictional Fault Strength Analysis of Palu-Koro and Matano Faults, Sulawesi, Indonesia, from Earthquake Focal Mechanism Data

ABSTRACT Sulawesi’s complex tectonic setting generates active Palu-Koro and Matano faults. Understanding earthquake mechanic is important for mitigation purpose. We performed fault strength analysis by examining its friction, through joint stress inversion and stress magnitude estimation approach, using focal mechanism data from International Seismological Centre bulletin. Friction was analyzed in four segments of the Palu-Koro Fault and two segments of the Matano Fault. Bootstrap and Jack-knife are applied to assess its uncertainty. From north to south, the friction pattern increases at the Palu-Koro Fault segments: Donggala (0.35<μs <0.56) to Palu segment (0.59<μs <0.76); then decreases sequentially: at Saluki (0.49<μs <0.55), Moa segment (0.31< μs <0.35), and further at the Matano Fault segment (Pamsoa-Ballawai) (0.26<μs <0.3). Regarding the 2018 Mw 7.5 Palu earthquake rupture, high friction at the Saluki segment coincides with and indicates its rupture termination. Seismicity records from 1977 to 2011 showed that the largest event occurred at Matano Fault has Mw less than 7.5. Low friction observed at Matano Fault correlates with small magnitude events and low fault strength.

The 2013 Mw 6.2 Shonbeh (Kaki) earthquake (Zagros-Iran): seismo-tectonic implications for the Kazerun shear transition zone from high-resolution aftershock and InSAR data analysis

SUMMARY The aim of this study is to investigate the aftershock sequence data recorded by a dense temporary seismological network deployed in the epicentral area of the 2013 April 9 Shonbeh (Kaki) earthquake, located in the south of the Simply Folded Belt of the Zagros (Iran). For a comprehensive understanding, coseismic displacements of the Shonbeh earthquake have been investigated using Interferometric Synthetic Aperture Radar (InSAR) data. The epicentral distribution of high-resolution relocated aftershocks shows NW–SE and N–S trending of seismicity. The aftershocks are confined between ∼3 and ∼14 km depth, which implies that the rupture occurred mostly within the sedimentary cover beside the fault parameters retrieved from InSAR modelling. Projection of precisely located aftershocks on NE-oriented section and InSAR ground displacement data are consistent with both NW-trending NE- and SW-dipping fault segments. We observe a NNW–SSE right-lateral strike-slip motions that accommodate oblique convergence and differential motion between the North and Central Zagros. The spatial pattern and focal mechanisms of aftershocks are consistent with a distributed deformation between NW–SE trending reverse and N–S trending right-lateral strike-slip fault segments in the south of the Kazerun transition zone that accommodates a wide shear zone.

Source Models of the 2016 and 2022 Menyuan Earthquakes and Their Tectonic Implications Revealed by InSAR.

The Haiyuan fault system plays a crucial role in accommodating the eastward expansion of the Tibetan Plateau (TP) and is currently slipping at a rate of several centimeters per year. However, limited seismic activities have been observed using geodetic techniques in this area, impeding the comprehensive investigation into regional tectonics. In this study, the geometric structure and source models of the 2022 Mw 6.7 and the 2016 Mw 5.9 Menyuan earthquakes were investigated using Sentinel-1A SAR images. By implementing an atmospheric error correction method, the signal-to-noise ratio of the 2016 interferometric synthetic aperture radar (InSAR) coseismic deformation field was significantly improved, enabling InSAR observations with higher accuracy. The results showed that the reliability of the source models for those events was improved following the reduction in observation errors. The Coulomb stress resulting from the 2016 event may have promoted the strike-slip movement of the western segment of the Lenglongling fault zone, potentially expediting the occurrence of the 2022 earthquake. The coseismic slip distribution and the spatial distribution of aftershocks of the 2022 event suggested that the seismogenic fault may connect the western segment of the Lenglongling fault (LLLF) and the eastern segment of the Tuolaishan fault (TLSF). Additionally, the western segment of the surface rupture zone of the northern branch may terminate in the secondary branch close to the Sunan-Qilian fault (SN-QL) strike direction, and the earthquake may have triggered deep aftershocks and accelerated stress release within the deep seismogenic fault.

Coseismic deformation and fault slip distribution of the 2023 MW7.8 and MW7.6 earthquakes in Türkiye

On February 6, 2023, a devastating earthquake with a moment magnitude of MW7.8 struck the town of Pazarcik in south-central Türkiye, followed by another powerful earthquake with a moment magnitude of MW7.6 that struck the nearby city of Elbistan 9 h later. To study the characteristics of surface deformation caused by this event and the influence of fault rupture, this study calculated the static coseismic deformation of 56 stations and dynamic displacement waveforms of 15 stations using data from the Turkish national fixed global navigation satellite system (GNSS) network. A maximum static coseismic displacement of 0.38 m for the MW7.8 Kahramanmaras earthquake was observed at station ANTE, 36 km from the epicenter, and a maximum dynamic coseismic displacement of 4.4 m for the MW7.6 Elbistan earthquake was observed at station EKZ1, 5 km from the epicenter. The rupture-slip distributions of the two earthquakes were inverted using GNSS coseismic deformation as a constraint. The results showed that the Kahramanmaras earthquake rupture segment was distinct and exposed on the ground, resulting in significant rupture slip along the Amanos and Pazarcik fault segments of the East Anatolian Fault. The maximum slip in the Pazarcik fault segment was 10.7 m, and rupture occurred at depths of 0–15 km. In the Cardak fault region, the Elbistan earthquake caused significant ruptures at depths of 0–12 km, with the largest amount of slip reaching 11.6 m. The Coulomb stress change caused by the Kahramanmaras earthquake rupture along the Cardak fault segment was approximately 2 bars, and the area of increased Coulomb stress corresponded to the subsequent rupture region of the MW7.6 earthquake. Thus, it is likely that the MW7.8 earthquake triggered or promoted the MW7.6 earthquake. Based on the cumulative stress impact of the MW7.8 and MW7.6 events, the southwestern segment of the East Anatolian Fault, specifically the Amanos fault segment, experienced a Coulomb rupture stress change exceeding 2 bars, warranting further attention to assess its future seismic hazard risk.

Different-Scale Heterogeneities in Segments of Active Faults and Their Influence on Slip Modes

Different-Scale Heterogeneities in Segments of Active Faults and Their Influence on Slip Modes

Holocene surface-rupturing paleo-earthquakes along the Kachchh Mainland Fault: shaping the seismic landscape of Kachchh, Western India

This study explores the seismotectonics of Kachchh in western India, a region with a low-to-moderate strain rate and a history of significant earthquakes, notably the 1819, Mw 7.8 Allah Bund, and the 2001, Mw 7.6 Bhuj. Despite its substantial seismic risk, comprehensive studies on Kachchh’s seismogenic sources are scarce. This is attributed to the concealed nature of active structures, hindering definitive age constraints in paleoseismological research. Our research comprises a detailed paleoseismic analysis of the north-verging, reverse Jhura Fault underlying the Jhura anticline, a segment of the Kachchh Mainland Fault. This fault segment shows evidence of surface-rupturing earthquakes in the area south of the Great Rann of Kachchh. The investigation reveals three paleoseismic events: Event I before 9.72 ka B.P., Event II between 8.63–8.20 ka B.P., and Event III between 6.20–6.09 ka B.P. The elapsed time since the last event on this fault is > 8000 years, suggesting that the area is exposed to a significant earthquake hazard. This highlights the need for more precise characterization of individual seismogenic sources for future earthquake preparedness.

Impact of coseismic uplifting on relative sea level change in the Southern Adriatic during the past 4.500 years – New evidence from Dubrovnik epicentral area based on analysis of algal rims and tidal notches

The Southern Adriatic is recognized as one of the most seismically active regions of the Central Mediterranean. It hosted the strongest historically known and instrumentally recorded earthquakes in Croatia and Montenegro. We conducted a detailed study of algal rims and tidal notches along the Dubrovnik–Konavle coastal area, aimed to contribute in reconstruction of relative sea level (RSL) change, palaeoearthquakes and neotectonics during the last 4500 years. The RSL reconstruction based on high-resolution geochronology showed that the spatial variability of RSL change is largely controlled by local tectonics, leading generally to an alternation of periods of RSL rise and rapid falls caused by coseismic uplift events. During the interseismic periods RSL rose at rates from 1.03 to 0.7 mm/yr before AD, followed by a slowdown to ~0.43 mm/yr, and reaching ~1.3 mm/yr after 1850s. The only exception relates to a period of slow RSL drop probably related to the 3.2 ka cold event. Rapid RSL falls caused by coseismic uplift indicate the occurrence of several large-scale events during the 4th–6th centuries AD, the 800–1360 cal AD period, and in 1395, with hints of earlier events between 1395 cal BC and 565 cal AD. These instances correspond to either unknown or insufficiently documented earthquakes. Conversely, the earthquakes in 1520 and 1667 have been clearly identified. The most compelling evidence of coseismic uplift is associated with the 1667 Dubrovnik earthquake, with an estimated uplift of 40–60 ± 15 cm documented along 40 km of coastline. Analyses of multiple sites with the same high-resolution marker show that Holocene tectonic deformations vary along different fault segments with minimum uplift rates ranging from ~0.3 to ~0.9 mm/yr over ~1.5 ka. The main seismogenic source responsible for coseismic uplifts is attributed to the Dalmatian unit basal thrust and its NE-dipping splays at the Adria-Dinarides boundary.