Extracellular Electron Transfer Research Articles

Efficient Enhancement of Extracellular Electron Transfer in Shewanella oneidensis MR-1 via CRISPR-Mediated Transposase Technology.

Electroactive bacteria, exemplified by Shewanella oneidensis MR-1, have garnered significant attention due to their unique extracellular electron-transfer (EET) capabilities, which are crucial for energy recovery and pollutant conversion. However, the practical application of MR-1 is constrained by its EET efficiency, a key limiting factor, due to the complexity of research methodologies and the challenges associated with the practical use of gene editing tools. To address this challenge, a novel gene integration system, INTEGRATE, was developed, utilizing CRISPR-mediated transposase technologies for precise genomic insertion within the S. oneidensis MR-1 genome. This system facilitated the insertion of extensive gene segments at different sites of the Shewanella genome with an efficiency approaching 100%. The inserted cargo genes could be kept stable on the genome after continuous cultivation. The enhancement of the organism's EET efficiency was realized through two primary strategies: the integration of the phenazine-1-carboxylic acid synthesis gene cluster to augment EET efficiency and the targeted disruption of the SO3350 gene to promote anodic biofilm development. Collectively, our findings highlight the potential of utilizing the INTEGRATE system for strategic genomic alterations, presenting a synergistic approach to augment the functionality of electroactive bacteria within bioelectrochemical systems.

Boosting Upconversion Efficiency in Optically Inert Shelled Structures with Electroactive Membrane through Electron Donation.

This study innovatively addresses challenges in enhancing upconversion efficiency in lanthanide-based nanoparticles (UCNPs) by exploiting Shewanella oneidensis MR-1, a microorganism capable of extracellular electron transfer. Electroactive membranes, rich in c-type cytochromes, are extracted from bacteria and integrated into membrane-integrated liposomes (MILs), encapsulating core-shelled UCNPs with an optically inactive shell, forming UCNP@MIL constructs. The electroactive membrane, tailored to donate electrons through the inert shell, independently boosts upconversion emission under near-infrared excitation (980 or 1550nm), bypassing ligand-sensitized UCNPs. The optically inactive shell restricts energy migration, emphasizing electroactive membrane electron donation. Density functional theory calculations elucidate efficient electron transfer due to the electroactive membrane hemes' highest occupied molecular orbital being higher than the valence band maximum of the optically inactive shell, crucial for enhancing energy transfer to emitter ions. The introduction of a SiO2 insulator coating diminishes light enhancement, underscoring the importance of unimpeded electron transfer. Luminescence enhancement remains resilient to variations in emitter or sensitizing ions, highlighting the robustness of the electron transfer-induced phenomenon. However, altering the inert shell material diminishes enhancement, emphasizing the role of electron transfer. This methodology holds significant promise for diverse biological applications. UCNP@MIL offers an advantage in cellular uptake, which proves beneficial for cell imaging.

Influence of support materials on the electroactive behavior, structure and gene expression of wild type and GSU1771-deficient mutant of Geobacter sulfurreducens biofilms.

Geobacter sulfurreducens DL1 is a metal-reducing dissimilatory bacterium frequently used to produce electricity in bioelectrochemical systems (BES). The biofilm formed on electrodes is one of the most important factors for efficient electron transfer; this is possible due to the production of type IV pili and c-type cytochromes that allow it to carry out extracellular electron transfer (EET) to final acceptors. In this study, we analyzed the biofilm formed on different support materials (glass, hematite (Fe2O3) on glass, fluorine-doped tin oxide (FTO) semiconductor glass, Fe2O3 on FTO, graphite, and stainless steel) by G. sulfurreducens DL1 (WT) and GSU1771-deficient strain mutant (Δgsu1771). GSU1771 is a transcriptional regulator that controls the expression of several genes involved in electron transfer. Different approaches and experimental tests were carried out with the biofilms grown on the different support materials including structure analysis by confocal laser scanning microscopy (CLSM), characterization of electrochemical activity, and quantification of relative gene expression by RT-qPCR. The gene expression of selected genes involved in EET was analyzed, observing an overexpression of pgcA, omcS, omcM, and omcF from Δgsu1771 biofilms compared to those from WT, also the overexpression of the epsH gene, which is involved in exopolysaccharide synthesis. Although we observed that for the Δgsu1771 mutant strain, the associated redox processes are similar to the WT strain, and more current is produced, we think that this could be associated with a higher relative expression of certain genes involved in EET and in the production of exopolysaccharides despite the chemical environment where the biofilm develops. This study supports that G. sulfurreducens is capable of adapting to the electrochemical environment where it grows.

Boosting power output in microbial fuel cell with sulfur-doped MXene/polypyrrole hydrogel anode for enhanced extracellular electron transfer process

Boosting power output in microbial fuel cell with sulfur-doped MXene/polypyrrole hydrogel anode for enhanced extracellular electron transfer process

Surface roughness influence on extracellular electron microbiologically influenced corrosion of C1018 carbon steel by Desulfovibrio ferrophilus IS5 biofilm

Carbon steel microbiologically influenced corrosion (MIC) by sulfate reducing bacteria (SRB) is known to occur via extracellular electron transfer (EET). A higher biofilm sessile cell count leads to more electrons being harvested for sulfate reduction by SRB in energy production. Metal surface roughness can impact the severity of MIC by SRB because of varied biofilm attachment. C1018 carbon steel coupons (1.2 cm2 top working surface) polished to 36 grit (4.06 μm roughness which is relatively rough) and 600 grit (0.13 μm) were incubated in enriched artificial seawater inoculated with highly corrosive Desulfovibrio ferrophilus IS5 at 28 ℃ for 7 d and 30 d. It was found that after 7 d of SRB incubation, 36 grit coupons had a 11% higher sessile cell count at (2.0 ± 0.17) × 108 cells/cm2, 52% higher weight loss at 22.4 ± 5.9 mg/cm2 (1.48 ± 0.39 mm/a uniform corrosion rate), and 18% higher maximum pit depth at 53 μm compared with 600 grit coupons. However, after 30 d, the differences diminished. Electrochemical tests with transient information supported the weight loss data trends. This work suggests that a rougher surface facilitates initial biofilm establishment but provides no long-term advantage for increased biofilm growth.

Variations in flavin redox states during extracellular electron transfer and electron conduction in Shewanella oneidensis

Flavin is one of the most prevalent redox molecules utilized by electroactive bacteria. Electroactive bacteria form a three-dimensional architecture with multiple cell assemblages on electrodes in bioelectrochemical systems. This provokes the importance of unveiling the redox chemistry of flavins during electron transfer not only at the bacteria/electrode interface but also inside cell assemblages. However, it has been difficult to directly compare the redox species contributing to each electron transfer reaction. In this study, to simultaneously detect the flavin redox species at the electrode surface and those in cell assemblages, we conducted bipotentiometric cyclic voltammetry on a colony of Shewanella oneidensis MR-1. The bipotentiometric data showed that flavin mononucleotide proceeds the redox cycle at − 0.43 V (vs. standard hydrogen electrode) in the MR-1 colony assignable to the semiquinone/hydroquinone redox cycle, which was supported by experiments with semiquinone scavenger and gene deletion mutants. Notably, the peak at − 0.43 V was not detected at the electrode surface, indicating that the flavin redox cycles and redox potentials involved in the electron transfer inside MR-1 assemblages differ from those at the MR-1/electrode interface. The measurement system presented herein offers a platform to clarify the redox reactions in cell assemblages as well as at the bacteria/electrode interface.

DNA‐rGO Aerogel Bioanodes with Microcompartmentalization for High‐Performance Bioelectrochemical Systems

AbstractBioelectrochemical systems (BES) have garnered significant attention for their applications in renewable energy, microbial fuel cells, biocatalysis, and bioelectronics. In BES, bioelectrodes are used to facilitate extracellular electron transfer among microbial biocatalysts. This study is focused on enhancing the efficiency of these processes through microcompartmentalization, a technique that strategically organizes and segregates microorganisms within the electrode, thereby bolstering BES output efficiency. The study introduces a deoxyribonucleic acid (DNA)‐based reduced graphene oxide (rGO) aerogel engineered as a bioanode to facilitate microorganism compartmentalization while providing an expanded biocompatible surface with continuous conductivity. The DNA‐rGO aerogel is synthesized through the self‐assembly of graphene oxide and DNA, with thermal reduction imparting lightweight structural stability and conductivity to the material. The DNA component serves as a hydrophilic framework, enabling precise regulation of compartment size and biofunctionalization of the rGO surface. To evaluate the performance of this aerogel bioanode, measurements of current generation are conducted using Shewanella oneidensis MR‐1 bacteria as a model biocatalyst. The bioanode exhibits a current density reaching up to 1.5 A·m⁻2, surpassing the capabilities of many existing bioanodes. With its abundant microcompartments, the DNA‐rGO demonstrates high current generation performance, representing a sustainable approach for energy harvesting without reliance on metals, polymers, or heterostructures.

Biosynthesis of silver nanoparticles using Burkholderia contaminans ZCC and mechanistic analysis at the proteome level

The biogenic synthesis of silver nanoparticles (AgNPs) by microorganisms has been a subject of increasing attention. Despite extensive studies on this biosynthetic pathway, the mechanisms underlying the involvement of proteins and enzymes in AgNPs production have not been fully explored. Herein, we reported that Burkholderia contaminans ZCC was able to reduce Ag+ to AgNPs with a diameter of (10±5) nm inside the cell. Exposure of B. contaminans ZCC to Ag+ ions led to significant changes in the functional groups of cellular proteins, with approximately 5.72% of the (C-OH) bonds being converted to (C-C/C-H) (3.61%) and CO (2.11%) bonds, and 4.52% of the CO (carbonyl) bonds being converted to (C-OH) bonds. Furthermore, the presence of Ag+ and AgNPs induced the ability of extracellular electron transfer for ZCC cells via specific membrane proteins, but this did not occur in the absence of Ag+ ions. Proteomic analysis of the proteins and enzymes involved in heavy metal efflux systems, protein secretion system, oxidative phosphorylation, intracellular electron transfer chain, and glutathione metabolism suggests that glutathione S-transferase and ubiquinol-cytochrome c reductase iron-sulfur subunit play importance roles in the biosynthesis of AgNPs. These findings contribute to a deeper understanding of the functions exerted by glutathione S-transferase and ferredoxin-thioredoxin reductase iron-sulfur subunits in the biogenesis of AgNPs, thereby hold immense potential for optimizing biotechnological techniques aimed at enhancing the yield and purity of biosynthetic AgNPs.

Electron Transfer in the Biogeochemical Sulfur Cycle.

Microorganisms are key players in the global biogeochemical sulfur cycle. Among them, some have garnered particular attention due to their electrical activity and ability to perform extracellular electron transfer. A growing body of research has highlighted their extensive phylogenetic and metabolic diversity, revealing their crucial roles in ecological processes. In this review, we delve into the electron transfer process between sulfate-reducing bacteria and anaerobic alkane-oxidizing archaea, which facilitates growth within syntrophic communities. Furthermore, we review the phenomenon of long-distance electron transfer and potential extracellular electron transfer in multicellular filamentous sulfur-oxidizing bacteria. These bacteria, with their vast application prospects and ecological significance, play a pivotal role in various ecological processes. Subsequently, we discuss the important role of the pili/cytochrome for electron transfer and presented cutting-edge approaches for exploring and studying electroactive microorganisms. This review provides a comprehensive overview of electroactive microorganisms participating in the biogeochemical sulfur cycle. By examining their electron transfer mechanisms, and the potential ecological and applied implications, we offer novel insights into microbial sulfur metabolism, thereby advancing applications in the development of sustainable bioelectronics materials and bioremediation technologies.

Genetically dissecting the electron transport chain of a soil bacterium reveals a generalizable mechanism for biological phenazine-1-carboxylic acid oxidation.

The capacity for bacterial extracellular electron transfer via secreted metabolites is widespread in natural, clinical, and industrial environments. Recently, we discovered the biological oxidation of phenazine-1-carboxylic acid (PCA), the first example of biological regeneration of a naturally produced extracellular electron shuttle. However, it remained unclear how PCA oxidation was catalyzed. Here, we report the mechanism, which we uncovered by genetically perturbing the branched electron transport chain (ETC) of the soil isolate Citrobacter portucalensis MBL. Biological PCA oxidation is coupled to anaerobic respiration with nitrate, fumarate, dimethyl sulfoxide, or trimethylamine-N-oxide as terminal electron acceptors. Genetically inactivating the catalytic subunits for all redundant complexes for a given terminal electron acceptor abolishes PCA oxidation. In the absence of quinones, PCA can still donate electrons to certain terminal reductases, albeit much less efficiently. In C. portucalensis MBL, PCA oxidation is largely driven by flux through the ETC, which suggests a generalizable mechanism that may be employed by any anaerobically respiring bacterium with an accessible cytoplasmic membrane. This model is supported by analogous genetic experiments during nitrate respiration by Pseudomonas aeruginosa.

A biocompatible electrode/exoelectrogens interface augments bidirectional electron transfer and bioelectrochemical reactions

Bidirectional electron transfer is about that exoelectrogens produce bioelectricity via extracellular electron transfer at anode and drive cytoplasmic biochemical reactions via extracellular electron uptake at cathode. The key factor to determine above bioelectrochemical performances is the electron transfer efficiency under biocompatible abiotic/biotic interface. Here, a graphene/polyaniline (GO/PANI) nanocomposite electrode specially interfacing exoelectrogens (Shewanella loihica) and augmenting bidirectional electron transfer was conducted by in-situ electrochemical modification on carbon paper (CP). Impressively, the GO/PANI@CP electrode tremendously improved the performance of exoelectrogens at anode for wastewater treatment and bioelectricity generation (about 54 folds increase of power density compared to blank CP electrode). The bacteria on electrode surface not only showed fast electron release but also exhibited high electricity density of extracellular electron uptake through the proposed direct electron transfer pathway. Thus, the cathode applications of microbial electrosynthesis and bio-denitrification were developed via GO/PANI@CP electrode, which assisted the close contact between microbial outer-membrane cytochromes and nanocomposite electrode for efficient nitrate removal (0.333 mM/h). Overall, nanocomposite modified electrode with biocompatible interfaces has great potential to enhance bioelectrochemical reactions with exoelectrogens.

Advancing autotrophic nitrogen removal in low C/N ratio wastewater: Innovative application of supercapacitor to enhance microbial electrolysis cells

This study presents a novel approach, the Supercapacitor Microbial Electrolysis Cell (SC-MEC), which utilizes a supercapacitor as an external power source to enhance the efficiency of autotrophic nitrogen removal in low C/N ratio wastewater. The results demonstrated that the SC-MEC system, operating under anaerobic conditions and devoid of any organic carbon source, exhibited exceptional performance in ammonia oxidation and total nitrogen (TN) removal when solely relying on ammonia nitrogen as the electron donor. Operating at a voltage of 1.8 V with a capacitance capacity of 30 F, ammonium oxidation rated up to 56.51 mg/L/day and TN removal rated up to 54.64 mg/L/day, in which 97% of ammonium nitrogen was converted to gaseous nitrogen. Furthermore, the charging and discharging process of supercapacitors autonomously regulated the bipolar potentials. Cyclic voltammetry (CV) analysis showed the significantly enhanced electrochemical activity of the SC-MEC system during the reaction process. Based on in-situ CV test results, it was inferred that this enhancement was associated with extracellular electron transfer mediators. The microbial community analysis revealed a process of synchronous nitrification and denitrification (SND) coupled with anammox, involving multiple genera, such as Candidatus Kuenenia, Nitrosomonas, Truepera, and Bosea. In conclusion, this study highlights the tremendous potential of SC-MEC in achieving efficient autotrophic nitrogen removal, offering more feasible and economical solutions for addressing low C/N water pollution issues.

Red-Light-Induced Genetic System for Control of Extracellular Electron Transfer.

Optogenetics is a powerful tool for spatiotemporal control of gene expression. Several light-inducible gene regulators have been developed to function in bacteria, and these regulatory circuits have been ported to new host strains. Here, we developed and adapted a red-light-inducible transcription factor for Shewanella oneidensis. This regulatory circuit is based on the iLight optogenetic system, which controls gene expression using red light. A thermodynamic model and promoter engineering were used to adapt this system to achieve differential gene expression in light and dark conditions within a S. oneidensis host strain. We further improved the iLight optogenetic system by adding a repressor to invert the genetic circuit and activate gene expression under red light illumination. The inverted iLight genetic circuit was used to control extracellular electron transfer within S. oneidensis. The ability to use both red- and blue-light-induced optogenetic circuits simultaneously was also demonstrated. Our work expands the synthetic biology capabilities in S. oneidensis, which could facilitate future advances in applications with electrogenic bacteria.

Isolation and Electrochemical Analysis of a Facultative Anaerobic Electrogenic Strain Klebsiella sp. SQ-1.

Electricigens decompose organic matter and convert stored chemical energy into electrical energy through extracellular electron transfer. They are significant biocatalysts for microbial fuel cells with practical applications in green energy generation, effluent treatment, and bioremediation. A facultative anaerobic electrogenic strain SQ-1 is isolated from sludge in a biotechnology factory. The strain SQ-1 is a close relative of Klebsiella variicola. Multilayered biofilms form on the surface of a carbon electrode after the isolated bacteria are inoculated into a microbial fuel cell device. This strain produces high current densities of 625 μA cm-2 by using acetate as the carbon source in a three-electrode configuration. The electricity generation performance is also analyzed in a dual-chamber microbial fuel cell. It reaches a maximum power density of 560 mW m-2 when the corresponding output voltage is 0.59 V. The facultative strain SQ-1 utilizes hydrous ferric oxide as an electron acceptor to perform extracellular electricigenic respiration in anaerobic conditions. Since facultative strains possess better properties than anaerobic strains, Klebsiella sp. SQ-1 may be a promising exoelectrogenic strain for applications in microbial electrochemistry.

Delineating cathodic extracellular electron transfer pathways in microbial electrosynthesis: Modulation of polarized potential and Pt@C addition

Microbial electrosynthesis (MES) is an innovative technology that employs microbes to synthesize chemicals by reducing CO2. A comprehensive understanding of cathodic extracellular electron transfer (CEET) is essential for the advancement of this technology. This study explores the impact of different cathodic potentials on CEET and its response to introduction of hydrogen evolution materials (Pt@C). Without the addition of Pt@C, H2-mediated CEET contributed up to 94.4 % at −1.05 V. With the addition of Pt@C, H2-mediated CEET contributions were 76.6 % (−1.05 V) and 19.9 % (−0.85 V), respectively. BRH-c20a was enriched as the dominated microbe (>80 %), and its relative abundance was largely affected by the addition of Pt@C NPs. This study highlights the tunability of MES performance through cathodic potential control and the addition of metal nanoparticles.

Shewanella oneidensis MR-1 coupled with biomass-derived carbon dots for promoted bioelectrochemical CO2 reduction: Mechanism elucidation of intensified energy metabolism

Bioelectrochemical CO2 reduction reaction (CO2RR) has been touted as one of the promising strategies to convert CO2 to high-value chemicals via the efficient microbial electrosynthesis (MES). However, the sluggish electron transfer efficiency between microbes and cathodes hampers the CO2 reduction efficiency. Herein, biomass-derived carbon dots (CDs) with high electrical conductivity were coupled with Shewanella oneidensis (S. oneidensis) MR-1 to construct a nanomaterial-bacterial biohybrid system to promote CO2-to-formate formation. Specifically, the corncob-derived CDs (cc-CDs) were highly-biocompatible with S. oneidensis MR-1, with such a constructed biohybrid system showing a marked formate titer of 0.50 mmol/L. Upon doping with Fe element, the resultant Fe-cc-CDs exhibited a considerably boosted formate titer of 1.22 mmol/L, which was 7.7 times higher than the pure S. oneidensis MR-1 system. Such significant CO2-to-formate conversion enhancement was contributed by the internalized CDs in S. oneidensis MR-1 stimulating extracellular electron transfer efficiency, therefore accelerating energy metabolism for formate bioelectrosynthesis. The intensified energy metabolism in S. oneidensis MR-1 was corroborated by the increased concentrations of ATP, NADH and overexpression of energy-related genes. This work demonstrates an intensified energy metabolism exemplification for CO2 reduction, which can be expanded to a host of different nanomaterials-internalized MES systems for bioelectrochemical implications.

Activated Carbon Application Simultaneously Alleviates Paddy Soil Arsenic Mobilization and Carbon Emission by Decreasing Porewater Dissolved Organic Matter.

Flooding of paddy fields during the rice growing season enhances arsenic (As) mobilization and greenhouse gas (e.g., methane) emissions. In this study, an adsorbent for dissolved organic matter (DOM), namely, activated carbon (AC), was applied to an arsenic-contaminated paddy soil. The capacity for simultaneously alleviating soil carbon emissions and As accumulation in rice grains was explored. Soil microcosm incubations and 2-year pot experimental results indicated that AC amendment significantly decreased porewater DOM, Fe(III) reduction/Fe2+ release, and As release. More importantly, soil carbon dioxide and methane emissions were mitigated in anoxic microcosm incubations. Porewater DOM of pot experiments mainly consisted of humic-like fluorophores with a molecular structure of lignins and tannins, which could mediate microbial reduction of Fe(III) (oxyhydr)oxides. Soil microcosm incubation experiments cospiking with a carbon source and AC further consolidated that DOM electron shuttling and microbial carbon source functions were crucial for soil Fe(III) reduction, thus driving paddy soil As release and carbon emission. Additionally, the application of AC alleviated rice grain dimethylarsenate accumulation over 2 years. Our results highlight the importance of microbial extracellular electron transfer in driving paddy soil anaerobic respiration and decreasing porewater DOM in simultaneously remediating As contamination and mitigating methane emission in paddy fields.

Enhanced anaerobic digestion of landfill leachate based on a novel redox mediator: Synergistic mechanism of enhancing extracellular electron transfer

The presence of recalcitrant compounds and toxic substances in landfill leachate results in low anaerobic digestion (AD) efficiency and poor methane production performance. Strengthening the extracellular electron transfer of microorganisms represents an effective approach to promote the AD of landfill leachate. In this study, a novel redox mediator (FeNC-RM) was synthesized through the combination of metal and non-metal doping, intensifying the stable operation of the landfill leachate AD system. Through characterization techniques including X-ray photoelectron spectroscopy and X-ray diffraction, it was observed that FeNC-RM possesses a larger specific surface area, abundant functional groups, and exceptional electrochemical performance. By adding FeNC-RM, the stability and efficiency of the medium-temperature AD system in the treatment of landfill leachate were improved: Obtained a high removal of chemical oxygen demand which was increased by 30 % compared to the control group and enhanced the specific methanogenic activity by 57.5 % compared to the control group. The electron transport system (ETS) activities of the experimental groups with the addition of RMs were all significantly higher than those of the control group, and the ETS activity of the sludge from the FeNC-RM group was 79.6 % higher than that of the control group. Through a comprehensive analysis of the underlying mechanism, it was determined that three aspects synergistically facilitated electron transfer: FeNC-RM, endowed with electrochemical capabilities, assumed a pivotal role in establishing a conduit for electron transport, thus promoting the synthesis of extracellular humic substances and augmenting electron transport activity. Furthermore, the microbial community was optimized by FeNC-RM, thereby fostering a co-nutritional mechanism between hydrolytic acidification bacteria and methanogens, establishing a direct interspecific electron transport pathway. In this study, an “endogenous + exogenous” electron transport model based on the enhanced extracellular electron transport pathway facilitated by FeNC-RM was proposed. This study offered valuable contributions to the advancement of anaerobic treatment technology for landfill leachate.

Enhancing Extracellular Electron Transfer of a 3D-Printed Shewanella Bioanode with Riboflavin-Modified Carbon Black Bioink.

3D printing of a living bioanode holds the potential for the rapid and efficient production of bioelectrochemistry systems. However, the ink (such as sodium alginate, SA) that formed the matrix of the 3D-printed bioanode may hinder extracellular electron transfer (EET) between the microorganism and conductive materials. Here, we proposed a biomimetic design of a 3D-printed Shewanella bioanode, wherein riboflavin (RF) was modified on carbon black (CB) to serve as a redox substance for microbial EET. By introducing the medicated EET pathways, the 3D-printed bioanode obtained a maximum power density of 252 ± 12 mW/m2, which was 1.7 and 60.5 times higher than those of SA-CB (92 ± 10 mW/m2) and a bare carbon cloth anode (3.8 ± 0.4 mW/m2). Adding RF reduced the charge-transfer resistance of a 3D-printed bioanode by 75% (189.5 ± 18.7 vs 47.3 ± 7.8 Ω), indicating a significant acceleration in the EET efficiency within the bioanode. This work provided a fundamental and instrumental concept for constructing a 3D-printed bioanode.

Transitional bimetallic heterostructure catalyst modified anode for microbial fuel cell treatment of high-intensity wastewater

In this paper, transitional bimetallic catalysts (FeS2/MoS2) were prepared by a simple one-step hydrothermal method, which were directly applied to MFC anodes for the treatment of high-concentration wastewater with simultaneous biopower generation. The obtained catalysts were highly biocompatible and favorable for inducing the enrichment of electroactive microorganisms and shortening the initiation cycle. The maximum power density (Pmax) and current density of the obtained anode reached 2.87 W·m−2 and 4.37 A·m−2 under 4000 mg·L−1 influent, which were 171% and 65% higher than that of bare carbon cloth, respectively. The chemical oxygen demand (COD) removal rate reached 98.82%. 16 S rRNA gene sequence analysis showed that the main electrophilic microorganisms induced by FeS2/8%MoS2-modified anodes were Synergistota (30.94%) and Geoalkallbacter (15.93%) compared to CC anodes. The resulting anode possesses excellent redox activity and high biocompatibility, and is simple and inexpensive to prepare. More importantly, it accelerated the extracellular electron transfer rate at the interface between the electroactive bacteria and the anode, providing a new idea of choice for single-chamber microbial fuel cells for low-cost treatment of high-concentration wastewater.