Surface roughness influence on extracellular electron microbiologically influenced corrosion of C1018 carbon steel by Desulfovibrio ferrophilus IS5 biofilm

Abstract

Carbon steel microbiologically influenced corrosion (MIC) by sulfate reducing bacteria (SRB) is known to occur via extracellular electron transfer (EET). A higher biofilm sessile cell count leads to more electrons being harvested for sulfate reduction by SRB in energy production. Metal surface roughness can impact the severity of MIC by SRB because of varied biofilm attachment. C1018 carbon steel coupons (1.2 cm2 top working surface) polished to 36 grit (4.06 μm roughness which is relatively rough) and 600 grit (0.13 μm) were incubated in enriched artificial seawater inoculated with highly corrosive Desulfovibrio ferrophilus IS5 at 28 ℃ for 7 d and 30 d. It was found that after 7 d of SRB incubation, 36 grit coupons had a 11 % higher sessile cell count at (2.0 ± 0.17) × 108 cells/cm2, 52 % higher weight loss at 22.4 ± 5.9 mg/cm2 (1.2 mm/a uniform corrosion rate), and 18 % higher maximum pit depth at 53 μm compared with 600 grit coupons. However, after 30 d, the differences diminished. Electrochemical tests with transient information supported the weight loss data trends. This work suggests that a rougher surface facilitates initial biofilm establishment but provides no long-term advantage for increased biofilm growth.