Ester Function Research Articles

In situ ortho-lithiation/functionalization of pentafluorosulfanyl arenes.

A general method for ortho-functionalization of pentafluorosulfanyl arenes has been developed. ortho-Lithiation with lithium tetramethylpiperidide at -60 °C in the presence of silicon, germanium, and tin electrophiles affords trapped products in moderate to high yields. Precise temperature regimes and the presence of electrophiles during lithiation are important for successful reactions, since the pentafluorosulfanyl group acts as a competent leaving group at temperatures above -40 °C. Fluoro, bromo, iodo, enolizable keto, cyano, ester, amide, and unsubstituted amino functionalities are compatible with the reaction conditions. Conversion of 2-dimethylsilylpentafluorosulfanyl benzene to 2-halosubstituted derivatives, useful as starting materials in cross-coupling chemistry, was also demonstrated.

Investigation of Leoligin Derivatives as NF-κΒ Inhibitory Agents.

The transcription factor NF-κB is an essential mediator of inflammation; thus, the identification of compounds that interfere with the NF-κB signaling pathway is an important topic. The natural products leoligin and 5-methoxyleoligin have served as a starting point for the development of NF-κB inhibitors. Using our modular total synthesis method of leoligin, modifications at two positions were undertaken and the effects of these modifications on the biological activity were investigated. The first modification concerned the ester functionality, where it was found that variations in this position have a significant influence, with bulky esters lacking Michael-acceptor properties being favored. Additionally, the substituents on the aryl group in position 2 of the tetrahydrofuran scaffold can vary to some extent, where it was found that a 3,4-dimethoxy and a 4-fluoro substitution pattern show comparable inhibitory efficiency.

Indolylarylsulfones bearing phenylboronic acid and phenylboronate ester functionalities as potent HIV‑1 non-nucleoside reverse transcriptase inhibitors

To explore the chemical space around the entrance channel of the HIV-1 reverse transcriptase (RT) binding pocket, we innovatively designed and synthesized a series of novel indolylarylsulfones (IASs) bearing phenylboronic acid and phenylboronate ester functionalities at the indole-2-carboxamide as new HIV-1 non-nucleoside reverse transcriptase inhibitors (NNRTIs) through structure-based drug design. All the newly synthesized compounds exhibited excellent to moderate potency against wild-type (WT) HIV-1 with EC50 values ranging from 6.7 to 42.6 nM. Among all, (3-ethylphenyl)boronic acid substituted indole-2-carboxamide and (4-ethylphenyl) boronate ester substituted indole-2-carboxamide were found to be the most potent inhibitors (EC50 = 8.5 nM, SI = 3310; EC50 = 6.7 nM, SI = 3549, respectively). Notably, (3-ethylphenyl)boronic acid substituted indole-2-carboxamide maintained excellent activities against the single HIV-1 mutants L100I (EC50 = 7.3 nM), K103N (EC50 = 9.2 nM), as well as the double mutant V106A/F227L (EC50 = 21.1 nM). Preliminary SARs and molecular modelling studies are also discussed in detail.

Selective Aerobic Oxidation of P-Methoxytoluene by Co(II)-Promoted NHPI Incorporated into Cross-Linked Copolymer Structure

A wide series of copolymer materials with various contents of 4-vinyl-diisopropyl-phtalate ester (10–90 mol%), divinylbenzene (1–11 mol%) and styrene, as monomers, were obtained by radical copolymerization. In the last steps of the synthesis, diisopropyl ester functionalities were converted into the form of N-hydroxyphthalimide (NHPI) rings. The obtained materials with the NHPI groups immobilized in the copolymer structure were studied by various physicochemical techniques, including FT-IR, UV-Vis-DR, XPS, elemental analysis, and tested as catalysts in aerobic oxidation of p-methoxytoluene in the presence of Co(II) acetate co-catalyst. Conversion of the aromatic substrate was correlated with the NHPI content and cross-linking degree. The best catalytic performance (conversions higher than 23%) was achieved for the copolymer catalysts containing 60% and 30% of 4-vinyl-diisopropyl-phtalate ester. At too high concentrations of NHPI and DVB, some of the NHPI groups were transformed into inactive (C=O)-N=O species or not available due to embedding inside the copolymer structure. The mechanism of the process involving both NHPI centers, forming phthalimide N-oxyl (PINO) radicals, and Co(II) cations was discussed. Stability of the developed catalysts was also tested. The opening of imide rings took place during the catalytic process, resulting in the formation of carboxyl groups and the release of hydroxylamine molecules. The deactivated catalyst could be easily regenerated by repeating two last steps of closing imide ring.

A Validated HPLC-PDA-HRMS Method to Investigate the Biological Stability and Metabolism of Antiparasitic Triterpenic Esters.

Pentacyclic triterpenes (PTs) are commonly found in medicinal plants with well-known antiparasitic effects. Previous research on C-3 and C-27 triterpenic esters showed effective and selective in vitro antiparasitic activities and in vivo effectiveness by parenteral routes. The aim of this study was to determine triterpenic esters’ stability in different biological-like media and the main microsomal degradation products. An HPLC-PDA method was developed and validated to simultaneously analyze and quantify bioactive triterpenic esters in methanol (LOQ: 2.5 and 1.25–100 µg/mL) and plasma (LOQ: 5–125 µg/mL). Overall, both triterpenic esters showed a stable profile in aqueous and buffered solutions as well as in entire plasma, suggesting gaining access to the ester function is difficult for plasma enzymes. Conversely, after 1 h, 30% esters degradation in acidic media was observed with potential different hydrolysis mechanisms. C-3 (15 and 150 µM) and C-27 esters (150 µM) showed a relatively low hepatic microsomal metabolism (<23%) after 1 h, which was significantly higher in the lowest concentration of C-27 esters (15 µM) (>40% degradation). Metabolic HPLC-PDA-HRMS studies suggested hydrolysis, hydroxylation, dehydration, O-methylation, hydroxylation and/or the reduction of hydrolyzed derivatives, depending on the concentration and the position of the ester link. Further permeability and absorption studies are required to better define triterpenic esters pharmacokinetic and specific formulations designed to increase their oral bioavailability.

Cobalt‐Catalyzed Deoxygenative Hydroboration of Nitro Compounds and Applications to One‐Pot Synthesis of Aldimines and Amides

AbstractThe commercially available and bench‐stable Co(acac)2 ligated with bis[(2‐diphenylphosphino)phenyl] ether (dpephos) was employed for selective room temperature hydroboration of nitro compounds with HBPin (TOF up to 4615 h−1), tolerating halide, hydroxy, amino, ether, ester, lactone, amide and heteroaromatic functionalities. These reactions offered a direct access to a variety of N‐borylamines RN(H)BPin, which were in situ treated with aldehydes and carboxylic acids to produce a series of aldimines and secondary carboxamides without the need for dehydrating and/or coupling reagents. Combination of these transformations in a sequential one‐pot manner allowed for direct and selective synthesis of aldimines and secondary carboxamides from readily available and inexpensive nitro compounds.magnified image

DFT Based Comparative Studies of Some Glucofuranose and Glucopyranoside Esters and Ethers

Carbohydrate-based molecular scaffolding received significant interest due to its impact on the drug discovery and development in synthetic carbohydrate chemistry during the last couple of decades. In this respect, four glucose compounds in the furanose and pyranose forms with ester and ether functionality were selected for their structural, thermodynamic and chemical reactivity studies. PASS predication indicated that the glucose in the six-membered pyranose form was more prone to biological properties compared to their five-membered furanose form. Also, in the pyranose form acetate ester (3) had more potentiality than the ethyl ether (4). The HOMO-LUMO energy gaps were almost similar for both monosubstituted furanose and pyranose glucose indicating their almost similar reactivities. It was also inferred that these 6-O-substituted compounds followed Lipinski’s rule with the acceptable range of ADMET levels, and hence, safe from lethal proarrhythmic risks. Hopefully, these results can be used in the near future for their probable pharmaceutical use without any remarkable toxicity.

Modification of polyvinyl chloride membranes for mycotoxins detection

In this work, we investigated modification and characterizations of modified-Polyvinyl Chloride (PVC) membranes for mycotoxin detections. The modification of PVC is a successfully nucleophilic substitution of Chloride atoms on the PVC membranes. The chemical compositions and characteristics of modified-PVC were characterized by Raman Microscope, NMR, GPC, DSC and FE-SEM. Sulfo-N-hydroxysuccinimide (Sulfo-NHS) and Carbodiimide EDC were used as an active ester functionalities with amino groups of modified-PVC membranes for covalent bonding of antibody. The antibody and mycotoxin interactions can be transduced directly by measuring the Differential Pulse Voltammetry (DPV). It was found that the zearalenone (ZEN) detections can be accomplished with these performances: sensitivity 14.1 ± 3 μA/μg, linear range 10−2 - 10−5 μg/ml and linearity 0.999.

Microwave-assisted esterification of P-acids

The possibilities for the preparation of dialky phenylphosphonates were evaluated. On the one hand, the oxidation of phenyl-H-phosphinates gave the corresponding phenylphosphonic acid monoesters. On the other hand, phenylphosphonates may be prepared by MW-assisted direct esterification of phenylphosphonic acid. The reaction with alcohols was performed under MW irradiation in the presence of an ionic liquid as the catalyst. The second ester function was established by alkylating esterification carried out with alkyl halides in the presence of triethylamine under MW conditions.

In‐Cell Generation of Anticancer Phenanthridine Through Bioorthogonal Cyclization in Antitumor Prodrug Development

AbstractPharmacological inactivation of antitumor drugs toward healthy cells is a critical factor in prodrug development. Typically, pharmaceutical chemists graft temporary moieties to existing antitumor drugs to reduce their pharmacological activity. Here, we report a platform able to generate the cytotoxic agent by intramolecular cyclization. Using phenanthridines as cytotoxic model compounds, we designed ring‐opened biaryl precursors that generated the phenanthridines through bioorthogonal irreversible imination. This reaction was triggered by reactive oxygen species, commonly overproduced in cancer cells, able to convert a vinyl boronate ester function into a ketone that subsequently reacted with a pendant aniline. An inactive precursor was shown to engender a cytotoxic phenanthridine against KB cancer cells. Moreover, the kinetic of cyclization of this prodrug was extremely rapid inside living cells of KB cancer spheroids so as to circumvent drug action.

In-Cell Generation of Anticancer Phenanthridine Through Bioorthogonal Cyclization in Antitumor Prodrug Development.

Pharmacological inactivation of antitumor drugs toward healthy cells is a critical factor in prodrug development. Typically, pharmaceutical chemists graft temporary moieties to existing antitumor drugs to reduce their pharmacological activity. Here, we report a platform able to generate the cytotoxic agent by intramolecular cyclization. Using phenanthridines as cytotoxic model compounds, we designed ring-opened biaryl precursors that generated the phenanthridines through bioorthogonal irreversible imination. This reaction was triggered by reactive oxygen species, commonly overproduced in cancer cells, able to convert a vinyl boronate ester function into a ketone that subsequently reacted with a pendant aniline. An inactive precursor was shown to engender a cytotoxic phenanthridine against KB cancer cells. Moreover, the kinetic of cyclization of this prodrug was extremely rapid inside living cells of KB cancer spheroids so as to circumvent drug action.

Mode of Action of Condensed- and Gaseous-Phase Fire Retardation in Some Phosphorus-Modified Polymethyl Methacrylate- and Polystyrene-Based Bulk Polymers.

The aspects of fire retardation in some phosphorus-modified polymethyl methacrylate (PMMA) and polystyrene (PSt) polymers are reported in the present paper. Both additive and reactive strategies were employed to obtain the desired level of loading of the phosphorus-bearing compound/moiety (2 wt.% of P in each case). Test samples were obtained using bulk polymerization. The modifying compounds contained the P-atom in various chemical environments, as well as in an oxidation state of either III or V. With a view to gain an understanding of the chemical constitution of the gaseous products formed from the thermal decomposition of liquid additives/reactives, these materials were subjected to GC/MS analysis, whereas the decomposition of solid additives was detailed using the pyrolysis-GC/MS technique. Other investigations included the use of: Inductively-coupled Plasma/Optical Emission Spectroscopy (ICP/OES), solid-state NMR and FT-IR spectroscopy. In the case of PMMA-based systems, it was found that the modifying phosphonate ester function, upon thermal cracking, produced ‘phosphorus’ acid species which initiated the charring process. In the case of solid additives, it is more likely that the resultant phosphorus- and/or oxygenated phosphorus-containing volatiles acted as flame inhibitors in the gaseous phase. With the PSt-based systems, a probable process involving the phosphorylation of the phenyl groups leading to crosslinking and char formation is feasible.

Does the reaction of nitrone derivatives with allenoates proceed by an initial (3 + 2) cycloaddition or O-Nucleophilic addition? A quantum chemical investigation

The question of whether the reaction between nitrone derivatives and allenoates proceeds with initial (3 + 2) cycloaddition (32CA) or the oxygen-nucleophilic (O-nucleophilic) addition has been theoretically investigated using density functional theory (DFT) at the M06–2X/6-311G(d,p) level of theory. In all of the reactions considered, the initial 32CA route is kinetically and thermodynamically preferred over the initial O-nucleophilic addition. Increasing the steric bulk of the substituents on the reactants bridges the kinetic and thermodynamic gap between the initial 32CA and O-nucleophilic addition but the 32CA is still energetically preferred, showing that with increasing steric bulk, the O-nucleophilic addition may become competitive with the 32CA route. Within the 32CA reactions, analysis of electrophilic (Pk+) and nucleophilic (Pk−) Parr functions at the various reaction centers in the allenoate indicates that the three-atom-components (TACs) chemo-selectively add across the olefinic bond bearing the ester functionality (COOMe) with the largest Mulliken spin density coefficients and this observation agrees with the energetic trends and experimental outcomes. The global electron density transfer (GEDT) analysis reveals a high polar character associated with the 32CA reaction of methylbuta-2,3-dienoate with N-methyl-C-phenylnitrone while that of the 32CA reaction of methylpenta-2,3-dienoate with N-cyclohexenylnitrone has a low polar character.

Rhodium‐Catalyzed Additive‐Free C−H Ethoxycarbonylation of (Hetero)Arenes with Diethyl Dicarbonate as a CO Surrogate

AbstractA rhodium‐catalyzed C(sp2)‐H ethoxycarbonylation of indoles and arylpyridines using diethyl dicarbonate was developed. The catalytic process features an additive‐free ethoxycarbonylation reaction, in which only ethanol and CO2 are produced as byproducts, providing a CO‐free and operationally simple protocol. The introduced ethoxycarbonyl group is easily transformed into other ester and amide functionalities in a single step. Moreover, the reaction can be successfully applied on gram scale, and allows for the efficient synthesis of indole‐2‐carboxylic acid esters and isophthalates.

Ester-Containing Imidazolium-Type Ionic Liquid Crystals Derived from Bio-based Fatty Alcohols

The need to take into account the life cycle of ionic liquids (ILs), from the sourcing of the raw materials involved in their synthesis to their disposal and degradation, has become paramount in the design of new IL-type molecular structures. In the case of 1-alkyl-3-methylimidazolium salts, one of the prominent IL families, there is an increasing demand for synthetic methods involving (i) substitution of the petro-based alkyl derivatives by readily available bio-sourced surrogates and (ii) functionalization of the alkyl tail with heterofunctional groups enabling the (bio)degradation of ILs after use. Herein, a straightforward and industrially viable synthesis of lipidic imidazolium salts is reported, starting from different bio-sourced fatty alcohols, including oleic, stearyl, and lauryl alcohols. This procedure is based on the acrylation of fatty alcohols, followed by the aza-Michael addition of the imidazole group onto the acrylate moiety. Subsequent quaternization, using either methyl iodide or methyl tosylate, provides a library of 1-alkylpropionate-3-methylimidazolium salts with various alkyl chain lengths (C18, C12, and C11) and incorporating different types of counteranions (iodide, tosylate, and tetrafluoroborate). These ester-containing analogues of classical 1-alkyl-3-methylimidazolium salts are all ILs, that is, with a melting point below 100 °C. In addition, most of them exhibit a liquid-crystal behavior and can be referred to as IL crystals (ILCs). The thermal stability, as well as the phase transitions of these ILs, has been investigated by thermogravimetric analysis, as well as differential scanning calorimetry, respectively, while the molecular structure into the crystalline phase and the mesophase is studied by X-ray scattering. Interestingly, ILCs featuring unsaturated alkyl tails exhibit a low melting point, close to room temperature, and the presence of the ester function is shown to provide an enhanced stabilization of the mesophase.

Anatase Nanocrystals Covalently Functionalized with EDTA-diol: Interaction with Aromatic Sulfur.

The current study addresses the generation of surface-modified nanograined anatase (5 nm) by a single-step in situ process. The EDTA-diol (ester) functionality existing on the surface of anatase nanoparticles was proved with the help of a battery of physicochemical techniques, including FTIR, XPS, and NMR spectral measurements. The sample showed excellent dispersity in ethanol. The anatase lattice showed disorder and had oxygen vacancies. From the XPS analysis, the existence of 14% of Ti3+ was established. The functionalized sample remained thermally stable up to 250 °C, beyond which it transformed into a graphite-titania nanocomposite. The interfacial ligand (ester) to metal (Ti) charge transfer (LMCT) transitions were present in the UV-visible spectrum of the sample and indicated the functionalization to be covalent. Unsaturated OH-groups on the surface yielded a ζ-potential value of -39.8 mV. The covalently functionalized nanotitania was exploited in the adsorptive desulfurization of thiophene, an aromatic sulfur model compound. The consequences of surface adsorption of thiophene were analyzed with the help of UV-visible, FTIR, and 1H and 13C NMR spectra and EDS and XPS measurements. The adsorption data, derived from the batch process, were fitted successfully to pseudo-second-order kinetics and the Temkin model. The adsorption capacity of covalently functionalized titania was compared with several other high surface area adsorbents containing thiophilic metal ions.

ET-CORM Mediated Vasorelaxation of Small Mesenteric Arteries: Involvement of Kv7 Potassium Channels.

Although the vasoactive properties of carbon monoxide (CO) have been extensively studied, the mechanism by which CO mediates vasodilation is not completely understood. Through-out published studies on CO mediated vasodilation there is inconsistency on the type of K+-channels that are activated by CO releasing molecules (CORMs). Since the vasorelaxation properties of enzyme triggered CORMs (ET-CORMs) have not been studied thus far, we first assessed if ET-CORMs can mediate vasodilation of small mesenteric arteries and subsequently addressed the role of soluble guanylate cyclase (sGC) and that of K-channels herein. To this end, 3 different types of ET-CORMs that either contain acetate (rac-1 and rac-4) or pivalate (rac-8) as ester functionality, were tested ex vivo on methoxamine pre-contracted small rat mesenteric arteries in a myograph setting. Pre-contracted mesenteric arteries strongly dilated upon treatment with both types of acetate containing ET-CORMs (rac-1 and rac-4), while treatment with the pivalate containing ET-CORM (rac-8) resulted in no vasodilation. Pre-treatment of mesenteric arteries with the sGC inhibitor ODQ abolished rac-4 mediated vasodilation, similar as for the known sGC activator SNP. Likewise, rac-4 mediated vasodilation did not occur in KCL pretreated mesenteric arteries. Although mesenteric arteries abundantly expressed a variety of K+-channels only Kv7 channels were found to be of functional relevance for rac-4 mediated vasodilation. In conclusion the current results identified Kv7 channels as the main channel by which rac-4 mediates vasodilation. In keeping with the central role of Kv7 in the control of vascular tone and peripheral resistance these promising ex-vivo data warrant further in vivo studies, particularly in models of primary hypertension or cardiac diseases, to assess the potential use of ET-CORMs in these diseases.

Preparation of mono-substituted malonic acid half oxyesters (SMAHOs).

The use of mono-substituted malonic acid half oxyesters (SMAHOs) has been hampered by the sporadic references describing their preparation. An evaluation of different approaches has been achieved, allowing to define the best strategies to introduce diversity on both the malonic position and the ester function. A classical alkylation step of a malonate by an alkyl halide followed by a monosaponification gave access to reagents bearing different substituents at the malonic position, including functionalized derivatives. On the other hand, the development of a monoesterification step of a substituted malonic acid derivative proved to be the best entry for diversity at the ester function, rather than the use of an intermediate Meldrum acid. Both these transformations are characterized by their simplicity and efficiency, allowing a straightforward access to SMAHOs from cheap starting materials.

A de novo Synthesis of Oxindoles from Cyclohexanone-Derived γ-Keto-Ester Acceptors Using a Desaturative Amination–Cyclization Approach

AbstractHere we report a desaturative approach for oxindole synthesis. This method uses simple ethyl 2-(2-oxocyclohexyl)acetates and primary amine building blocks as coupling partners. A dual photoredox–cobalt manifold is used to generate a secondary aniline that, upon heating, cyclizes with the pendent ester functionality. The process operates under mild conditions and was applied to the modification of several amino acids, the blockbuster drug mexiletine, as well as the formation of dihydroquinolinones.

Antibacterial constituents from the roots, stem bark and leaves of Manilkara obovata (Sabine &amp; G. Don) J. H. Hemsl. (Sapotaceae)

• Obovacoumaric acid and obovatol were isolated from the methanolic extracts of Manilkara obovata . • A new ethylcanophyllate was obtained by esterification of canophyllic acid. • The structures were elucidated by NMR and single crystal X-ray crystallography. • Antibacterial effects of the methanolic extracts of Manilkara obovata . The investigation of the methanolic extracts of the roots, stem bark and leaves of Manilkara obovata (Sabine & G. Don) J. H. Hemsl. (Sapotaceae), synonym Manilkara argentea Pierre ex Dubard, has led to the isolation and characterization of a new 4-phenylcoumarin derivative, in form of a racemic mixture of obovacoumaric acid ( 1a ) and the previously reported callophyllic acid ( 1b ) as well as a new taraxerane type triterpene named obovatol ( 2 ), alongside twenty-five known compounds. In addition, ethylcanophyllate ( 3a ), obtained by esterification of canophyllic acid ( 3 ) is reported here for the first time. The structures of compounds were determined by comprehensive spectroscopic analyses of their 1D and 2D NMR, EI/ESI-MS and single crystal X-ray diffraction (SC-XRD) analysis for 1a and 1b , accompanied by comparison with reported records. In addition, the antibacterial activity of crude extracts, fractions and some of the isolated compounds including the hemi-synthesized ethylcanophyllate ( 3a ) was determined against Salmonella typhi , Staphylococcus aureus ATCC4330, Enterobacter cloacae , Pseudomonas aeruginosa HM801, Streptococcus pneumoniae ATCC491619 and Escherichia coli ATCC25322 applying the broth microdilution method. While the methanolic stem bark extract showed good to significant activity against all bacterial test strains with MICs between 7.8 and 62.5 μg/mL, its fractions A and B were less active, indicating synergistic effects. This effect was also observed for the methanolic root extract, which gave a significant MIC against Staphylococcus aureus ATCC4330 with MIC < 3.9 μg/mL, but only MICs of 31.2 and 7.8 μg/mL for its fractions D and E. Likewise, though fractions F 3 and F 4 of the methanolic leaf extract displayed good MICs of 31.2 and 15.6 μg/mL, respectively, against Staphylococcus aureus ATCC4330, tested compounds were not stronger active. Interestingly, the hemi-synthesized ethylcanophyllate ( 3a ) based on the completely antibacterial inactive canophyllic acid ( 3 ) displayed a good MIC of 15.6 μg/mL against Staphylococcus aureus ATCC4330, pointing here to a dominant role of the ester function in compound 3a in the structure-activity relationship.