Ester Function Research Articles

Synthesis of [3 H] and [14 C]genipin.

[3 H]Genipin was synthesized in a single step by Ir(I) catalyzed hydrogen isotope exchange. Conditions for selective exchange of the sp2 CH bond ortho to the methyl ester functionality were developed through deuterium modeling studies through a catalyst screen. Optimized conditions so obtained were then utilized with tritium gas to generate [3 H]genipin at a specific activity of 18.5 Ci/mmol. Racemic [14 C]genipin was prepared in eight steps in overall 5.4% radiochemical yield from potassium [14 C]cyanide.

Fast-Acting Antibacterial, Self-Deactivating Polyionene Esters.

Biocidal compounds that quickly kill bacterial cells and are then deactivated in the surrounding without causing environmental problems are of great current interest. Here, we present new biodegradable antibacterial polymers based on polyionenes with inserted ester functions (PBI esters). The polymers are prepared by polycondensation reaction of 1,4-dibromobutene and different tertiary diaminodiesters. The resulting PBI esters are antibacterially active against a wide range of bacterial strains and were found to quickly kill these cells within 1 to 10 min. Because of hydrolysis of the ester groups, the PBI esters are degraded and deactivated in aqueous media. The degradation rate depends on the backbone structure and the pH. The structure of the polymers also controls the deactivation mechanism. While the more hydrophilic polymers require hydrolyses of only 19 to 30% of the ester groups to become practically inactive, the more hydrophobic PBI esters require up to 85% hydrolysis to achieve the same result. Thus, depending on the environmental conditions and the chemical nature, the PBI esters can be active for only 20 min or for at least one week.

Investigation of pesticides on honey bee carbonic anhydrase inhibition

Carbonic anhydrase (CA, EC 4.2.1.1) plays crucial physiological roles in many different organisms, such as in pH regulation, ion transport, and metabolic processes. CA was isolated from the European bee Apis mellifera (AmCA) spermatheca and inhibitory effects of pesticides belonging to various classes, such as carbamates, thiophosphates, and pyrethroids, were investigated herein. The inhibitory effects of methomyl, oxamyl, deltamethrin, cypermethrin, dichlorodiphenyltrichloroethane (DDT) and diazinon on AmCA were analysed. These pesticides showed effective in vitro inhibition of the enzyme, at sub-micromolar levels. The IC50 values for these pesticides ranged between of 0.0023 and 0.0385 μM. The CA inhibition mechanism with these compounds is unknown at the moment, but most of them contain ester functionalities which may be hydrolysed by the enzyme with the formation of intermediates that can either react with amino acid residues or bid to the zinc ion from the active site.

Oxa-[3+3] annulation of MBH-carbonates of propiolaldehydes with α-nitro/bromo ketones to access 2H-pyrans.

A novel alkyne-assisted annulation reaction of MBH-carbonates of propiolaldehydes with α-nitro/bromo ketones is reported, providing a facile synthesis of substituted 2H-pyrans in good yields. This reaction divulges the inimitable reactivity of the MBH-carbonates of propiolaldehydes as C3-synthons wherein the alkyne functionality promoted the reaction without participating in the oxa-[3+3] annulation. The obtained products, having alkyne and ester functionalities, allowed further annulations to generate diverse pyrano[3,4-c]pyran-1-ones.

A modified approach for the synthesis of biologically relevant 5-substituted-2-N-aryl-1,3-oxazole derivatives in mild conditions

We herein report a modified approach for the synthesis of some pharmacologically relevant oxazole derivatives linked with amides under mild conditions. The utilization of polymer-supported triphenylphosphine (poly-TPP) as a phosphine ligand for generating the key iminophosphorane intermediate was found to be vital for achieving the synthesis of oxazole in room temperature. This alternative approach relying on the cyclization reaction of readily available phenacyl azide and phenyl isothiocyanate rendered the oxazole derivative 3a in excellent yield. This methodology has been applied for the synthesis of a more decorated oxazole derivative 3b having ester functionality and was further converted to different amides under microwave irradiation in good to excellent yields in the later stage.

Amphiphilic poly(esteracetal)s as dual pH- and enzyme-responsive micellar immunodrug delivery systems

Amphiphilic poly(esteracetal) micelles encapsulate potent immune modulatory drugs, but fall apart and release them upon dual pH or enzymatic stimuli.

Organoborane Strategy for Polymers Bearing Lactone, Ester, and Alcohol Functionality

Vinyl alcohol–methacrylatecopolymers have intriguing functionally rich structures but are synthetically inaccessible from vinyl acetate, the traditional precursor to polyvinyl alcohol. We report a ...

Synthesis of a Regioregular Series of Poly(aryl ether carbonates) and Their Glass Transition Temperatures.

Bisphenol A polycarbonate (BPA-PC) is a remarkable high-performance engineering polymer, although it is susceptible to photo-Fries and hydrolytic degradation. New poly(aryl ether carbonates) were synthesized to address these limitations by replacing the chain backbone carbonate ester functionality with aryl ether functionality. The monomers for these new polymers were synthesized by a variation of the Ullmann condensation accelerated by 2,2,6,6-tetramethylheptane-3,5-dione and promoted by Cs2CO3 and 1-methyl-2-pyrrolidinone under mild conditions. Four such bisphenol A-based diarylether monomers containing different mass ratios of carbonate ester groups were prepared and polymerized with phosgene gas to give novel poly(aryl ether carbonates). Polymers were named as di-o-BPA-PC 9′, tri-o-BPA-PC 11′, tetra-o-BPA-PC 13′, and penta-o-BPA-PC 15′ where di-, tri-, tetra-, and penta- reflect the number of diphenylisopropylidene units in each of the respective polymers. The molecular weights of the resulting four poly(aryl ether carbonates) were measured by gel permeation chromatography. Differential scanning calorimetry was used to measure glass transition temperature (Tg). The polymers exhibited weight-average molecular weights up to 4.09 × 105 g/mol and Tg in the range of 136 to 149 °C with no melting temperature peak, indicative of their amorphous character. The new polymers formed transparent and flexible films by solution casting from chloroform solution.

Interface Reinforcement of Pulp Fiber Based ABS Composite with Hydrogen Bonding Initiated Interlinked Structure via Alkaline Oxidation and tert-Butyl Grafting on Cellulose.

Interface optimization in preparing natural fiber based biocomposite becomes a key factor that determines overall properties, especially mechanical performance. The solution for upgrading interfacial adhesion stemmed from polar fiber and nonpolar polymer remains unclear. Here, a kind of pulp fiber/acrylonitrile-butadiene-styrene (ABS) composite with content ratio of 1:1 was fabricated by functionalizing the cellulose fiber to coordinate interaction between fiber and ABS. With addition of 5 wt % polyacrylamide (PAM) there existed an interlinked three-element structure in composite. Three types of treatment to cellulose fiber, including alkali immersion, pivaloyl chloride grafting for 10 h and 20 h were conducted. Pulp fiber that was treated with alkali for one hour, followed by pivaloyl chloride reaction for ten hours, proved to be effective for interfacial adhesion. X-ray Photoelectron Spectroscopy (XPS) analysis reveals 21.9% of carbonyl and 12.1% of ester function in this fiber, which corresponds to oxidation and grafting. For its composite SEM picture displays that most of cellulose fiber are rooted in ABS and evident traces of tearing or fracture can be observed after tension test. DMA test indicates that this modified pulp fiber/ABS composite exhibits great compatibility, because of combined loss modulus peak ranging from 80 °C to 100 °C. Moreover, the well miscible composite has a tensile strength of 58.1 MPa and elastic modulus of 2515 MPa, increasing by nearly 50% and 60% from those of pure ABS, respectively.

Asymmetric Synthesis of a 5,7-Fused Ring System Enabled by an Intramolecular Buchner Reaction with Chiral Rhodium Catalyst.

A Rh-catalyzed asymmetric intramolecular Buchner ring expansion of α-alkyl-α-diazoesters has been developed. The present protocol generates a 5,7-fused ring system in an enantioselective manner while minimizing β-hydrogen migration, which has been a competing reaction when using α-alkyl-α-diazoesters. The ester functionality at the bridgehead position would be a useful synthetic handle for further derivatization to complex molecules including natural products.

Solid-state conformations of linear depsipeptide amides with an alternating sequence of α,α-disubstituted α-amino acid and α-hydroxy acid.

Depsipeptides and cyclodepsipeptides are analogues of the corresponding peptides in which one or more amide groups are replaced by ester functions. Reports of crystal structures of linear depsipeptides are rare. The crystal structures and conformational analyses of four depsipeptides with an alternating sequence of an α,α-disubstituted α-amino acid and an α-hydroxy acid are reported. The molecules in the linear hexadepsipeptide amide in (S)-Pms-Acp-(S)-Pms-Acp-(S)-Pms-Acp-NMe2 acetonitrile solvate, C47H58N4O9·C2H3N, (3b), as well as in the related linear tetradepsipeptide amide (S)-Pms-Aib-(S)-Pms-Aib-NMe2, C28H37N3O6, (5a), the diastereoisomeric mixture (S,R)-Pms-Acp-(R,S)-Pms-Acp-NMe2/(R,S)-Pms-Acp-(R,S)-Pms-Acp-NMe2 (1:1), C32H41N3O6, (5b), and (R,S)-Mns-Acp-(S,R)-Mns-Acp-NMe2, C30H37N3O6, (5c) (Pms is phenyllactic acid, Acp is 1-aminocyclopentanecarboxylic acid and Mns is mandelic acid), generally adopt a β-turn conformation in the solid state, which is stabilized by intramolecular N-H...O hydrogen bonds. Whereas β-turns of type I (or I') are formed in the cases of (3b), (5a) and (5b), which contain phenyllactic acid, the torsion angles for (5c), which incorporates mandelic acid, indicate a β-turn in between type I and type III. Intermolecular N-H...O and O-H...O hydrogen bonds link the molecules of (3a) and (5b) into extended chains, and those of (5a) and (5c) into two-dimensional networks.

Phosphahelicenes with (Thio)Phosphinic Acid and Ester Functions by the Oxidative Photocyclisation Approach.

Phosphahelicenes with thiophosphinic acid and ester functions have been obtained by the oxidative photocyclisation of olefins bearing both a benzophenanthrene and a benzophosphole unit. When the method has been extended to olefins bearing a partially saturated benzophospholene unit, a divergent regioselectivity of the photocyclisation step has been observed, leading to new helicenes in which the phosphorus function is located on the external rim of the helical backbone. The observed regioselectivity correlates well with the free-valence numbers of the atoms involved in the photocyclisation reaction (DFT calculations).

High-Throughput Ligand Screening Enables the Enantioselective Conjugate Borylation of Cyclobutenones to Access Synthetically Versatile Tertiary Cyclobutylboronates.

Cyclobutane rings are important in medicinal chemistry, yet few enantioselective methods exist to access this scaffold. In particular, cyclobutylboronates are receiving increasing attention in the literature due to the synthetic versatility of alkylboronic esters and the increasing role of boronic acids in drug discovery. Herein, a conjugate borylation of α-alkyl,β-aryl/alkyl cyclobutenones is reported leading to the first synthesis of enantioenriched tertiary cyclobutylboronates. Cyclobutanones with two stereogenic centers are obtained in good to high yield, with high enantioselectivity and diastereoselectivity. Vital to this advance are the development of a novel approach to α,β unsymmetrically disubstituted cyclobutenone substrates and the use of a high-throughput chiral ligand screening platform. The synthetic utility of both the boronic ester and ketone functionalities is displayed, with remarkable chemoselectivity for either group being possible in this small ring scaffold.

Synthesis of Benzo[b]azocin-2-ones by Aryl Amination and Ring-Expansion of α-(Iodophenyl)-β-oxoesters.

Transformation of β‐oxoesters with PhI(OCOCF3)2 leads to α‐(ortho‐iodophenyl)‐β‐oxoesters. These materials are the starting point for the synthesis of 6‐carboxybenzo[b]azocin‐2‐ones by a sequence of aryl amination and ring transformation. This reaction sequence starts with copper‐catalyzed formation of N‐alkyl anilines from the iodoarenes and primary amines in the presence of K3PO4 as stoichiometric base. The intermediate products underwent ring transformation by addition of the nitrogen into the carbonyl group of the cycloalkanone, furnishing benzo‐annulated eight‐membered ring lactams. Under the same reaction conditions, the cyclohexanone and cycloheptanone derivatives gave no aminated products, but ring‐transformed to benzofuran derivatives. The title compounds of this investigation contain two points for further diversification (the lactam nitrogen and the carboxylate function), thus, the suitability of this compound class as a scaffold was proven by appropriate functionalizations. The first series of derivatizations of the scaffold was initiated by hydrogenolytic debenzylation of N‐benzyl derivative to provide the NH‐congener, which could be deprotonated with LDA and alkylated at nitrogen to give further examples of this compound class. Secondly, the ester function was submitted to saponification and the resulting carboxylic acid could be amidated using HATU as coupling reagent to furnish different amides.

Electronic spectroscopic characterization of the formation of iron(III) metal complexes: The 8-HydroxyQuinoline as ligand case study

Synthetic siderophores derivated from 8-HydroxyQuinoline (HQ) present various biological and pharmacological activities, such as anti-neurodegenerative or anti-oxydative. However, their affinity towards iron(III) seems to depend on the position (i.e., 7 or 2) of the HQ substitution by an electron withdrawing group. Two ester-derivatives of HQ at 2- and 7-position are synthesized and their respective iron-complexation is characterized by a joined experimental and theoretical work. By investigating the stability of all the possible accessible spin states of the iron(III) complexes at density-functional theory (DFT) level, we demonstrate that the high-spin (HS) state is the most stable one, and leads to a UV/vis absorption spectrum in perfect match with experiments. From this DFT protocol, and in agreement with the experimental results, we show that the ester functionalization of HQ in 2-position weakens the formation of the iron(III) complex while its substitution in 7-position allows a salicylate coordination of the metal very close to the ideal octahedral environment.

Lipase-Catalyzed Synthesis of Renewable Plant Oil-Based Polyamides.

Enzyme catalyzed synthesis of renewable polyamides was investigated using Candida antarctica lipase B. A fatty acid-derived AB-type functional monomer, having one amine and one methyl ester functionality, was homopolymerized at 80 and 140 °C. Additionally, the organobase 1,5,7-triazabicyclo[4.4.0]dec-5-ene (TBD) was used as a catalyst. The results from the two catalysts were comparable. However, the amount of lipase added was 1.2 × 103 times lower, showing that the lipase was a more efficient catalyst for this system as compared to TBD. Moreover, the AB-type monomer was copolymerized with 1,12-diaminododecane to synthesize oligoamides of two different lengths.

Redox-Neutral β-C(sp3)-H Functionalization of Cyclic Amines via Intermolecular Hydride Transfer.

Herein, we report the first redox-neutral and transition-metal-free β-C(sp3)-H functionalization of cyclic amines via a consecutive intermolecular hydride transfer process. A series of N-aryl pyrrolidines and N-aryl 1,2,3,4-tetrahydropyridines decorated with CF3 and carboxylic ester functionalities are directly accessed in good yields from pyrrolidines and piperidines. This work pushes forward the application of the intermolecular hydride transfer strategy in one-step assembly of molecular complexity.

Promotion of the active/barrier protection function of epoxy ester coating/steel system utilizing differently synthesized hybrid pigment through zinc acetylacetonate tailored with green inhibitor molecules

This study aims at one-pot synthesis of a series of hybrid anti-corrosive pigments based on zinc acetylacetonate and Urtica Dioica leaves extract at different pHs for inclusion into an epoxy ester (EE) coating and improvement of the coating dual active/barrier anti-corrosion performance. The characterization of the synthesized pigments was accomplished by X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS) analyses. The modified and neat EE coatings performance was evaluated by electrochemical impedance spectroscopy (EIS) and neutral salt spray (NSS) test. The coating phase investigation by EIS proved the effectiveness of the pigmentation in corrosion protection activity improvement. A magnificent inhibition efficiency (IE%) of about 99.995% was achieved after 70 days of immersion in the pigmented EE coated samples. The pigment particles, which were used in the coating formulation, revealed the most effective function in the solution phase study where an inhibition efficiency of approximately 96% was achieved.

Dual-Participation Protecting Group Solves the Anomeric Stereocontrol Problems in Glycosylation Reactions.

The 2,2-dimethyl-2-(ortho-nitrophenyl)acetyl (DMNPA) group permits, via robust neighboring group participation (NGP) or long distance participation (LDP) effects, the stereocontrolled 1,2-trans, 1,2-cis, as well as β-2,6-dideoxy glycosidic bond generation, while suppressing the undesired orthoester byproduct formation. The robust stereocontrol capability of the DMNPA is due to the dual-participation effect from both the ester functionality and the nitro group, verified by control reactions and DFT calculations and further corroborated by X-ray spectroscopy.

An Activatable Cancer-Targeted Hydrogen Peroxide Probe for Photoacoustic and Fluorescence Imaging.

Reactive oxygen species play an important role in cancer, however, their promiscuous reactivity, low abundance, and short-lived nature limit our ability to study them in real time in living subjects with conventional noninvasive imaging methods. Photoacoustic imaging is an emerging modality for in vivo visualization of molecular processes with deep tissue penetration and high spatiotemporal resolution. Here, we describe the design and synthesis of a targeted, activatable probe for photoacoustic imaging, which is responsive to one of the major and abundant reactive oxygen species, hydrogen peroxide (H2O2). This bifunctional probe, which is also detectable with fluorescence imaging, is composed of a heptamethine carbocyanine dye scaffold for signal generation, a 2-deoxyglucose cancer localization moiety, and a boronic ester functionality that specifically detects and reacts to H2O2. The optical properties of the probe were characterized using absorption, fluorescence, and photoacoustic measurements; upon addition of pathophysiologic H2O2 concentrations, a clear increase in fluorescence and red-shift of the absorption and photoacoustic spectra were observed. Studies performed in vitro showed no significant toxicity and specific uptake of the probe into the cytosol in breast cancer cell lines. Importantly, intravenous injection of the probe led to targeted uptake and accumulation in solid tumors, which enabled noninvasive photoacoustic and fluorescence imaging of H2O2. In conclusion, the reported probe shows promise for the in vivo visualization of hydrogen peroxide. SIGNIFICANCE: This study presents the first activatable and cancer-targeted hydrogen peroxide probe for photoacoustic molecular imaging, paving the way for visualization of hydrogen peroxide at high spatiotemporal resolution in living subjects.Graphical Abstract: http://cancerres.aacrjournals.org/content/canres/79/20/5407/F1.large.jpg.