Encapsulated Stem Cells Research Articles

Dual-enzymatically cross-linked gelatin hydrogel promotes neural differentiation and neurotrophin secretion of bone marrow-derived mesenchymal stem cells for treatment of moderate traumatic brain injury

Traumatic brain injury (TBI) is one of the most devastating nervous injuries. Neural tissue engineering based on stem cells and bioactive scaffold is a promising but challenging approach for neural repair. A cutting-edge system with capability to control the fate of encapsulated stem cells is attractive to enhance neural regeneration after TBI. Herein, an injectable gelatin hydrogel dual-enzymatically cross-linked by horse radish peroxidase (HRP) and choline oxidase (ChOx) was performed as the neural scaffold to load murine bone marrow-derived mesenchymal stem cells (BMSC) for TBI treatment. The results of in vitro cellular experiments showed that low cross-linked gelatin hydrogel could obviously promote cellular viability, neural differentiation, and neurotrophins secretion of the loaded BMSC. In vivo tests on a TBI model of C57BL/6 mouse demonstrated that BMSC-laden gelatin hydrogel implants could significantly reduce the damaged area, ameliorate inflammation, attenuate neuronal apoptosis, facilitate survival and proliferation of endogenous neural cells, and promote the neurological function recovery of TBI mice. All data suggest that establishment of this three-dimensional (3D) gelatin hydrogel stem cell-loaded system is a promising therapeutic strategy for TBI or other neurological rehabilitation.

Encapsulation of murine hematopoietic stem and progenitor cells in a thiol-crosslinked maleimide-functionalized gelatin hydrogel

Biomaterial platforms are an integral part of stem cell biomanufacturing protocols. The collective biophysical, biochemical, and cellular cues of the stem cell niche microenvironment play an important role in regulating stem cell fate decisions. Three-dimensional (3D) culture of stem cells within biomaterials provides a route to present biophysical and biochemical stimuli through cell-matrix interactions and cell-cell interactions via secreted biomolecules. Herein, we describe a maleimide-functionalized gelatin (GelMAL) hydrogel that can be crosslinked via thiol-Michael addition click reaction for the encapsulation of sensitive stem cell populations. The maleimide functional units along the gelatin backbone enables gelation via the addition of a dithiol crosslinker without requiring external stimuli (e.g., UV light, photoinitiator), thereby reducing reactive oxide species generation. Additionally, the versatility of crosslinker selection enables easy insertion of thiol-containing bioactive or bioinert motifs. Hematopoietic stem cells (HSCs) and mesenchymal stem cells (MSCs) were encapsulated in GelMAL, with mechanical properties tuned to mimic the in vivo bone marrow niche. We report the insertion of a cleavable peptide crosslinker that can be degraded by the proteolytic action of Sortase A, a mammalian-inert enzyme. Notably, Sortase A exposure preserves stem cell surface markers, which are an essential metric of hematopoietic activity used in immunophenotyping. This novel GelMAL system enables a route to produce artificial stem cell niches with tunable biophysical properties, intrinsic cell-interaction motifs, and orthogonal addition of bioactive crosslinks. Statement of significanceWe describe a maleimide-functionalized gelatin hydrogel that can be crosslinked via a thiol-maleimide mediated click reaction to form a stable hydrogel without the production of reactive oxygen species typical in light-based crosslinking. The mechanical properties can be tuned to match the in vivo bone marrow microenvironment for hematopoietic stem cell culture. Additionally, we report inclusion of a peptide crosslinker that can be cleaved via the proteolytic action of Sortase A and show that Sortase A exposure does not degrade sensitive surface marker expression patterns. Together, this approach reduces stem cell exposure to reactive oxygen species during hydrogel gelation and enables post-culture quantitative assessment of stem cell phenotype.

Enhanced mechanosensing of cells in synthetic 3D matrix with controlled biophysical dynamics

3D culture of cells in designer biomaterial matrices provides a biomimetic cellular microenvironment and can yield critical insights into cellular behaviours not available from conventional 2D cultures. Hydrogels with dynamic properties, achieved by incorporating either degradable structural components or reversible dynamic crosslinks, enable efficient cell adaptation of the matrix and support associated cellular functions. Herein we demonstrate that given similar equilibrium binding constants, hydrogels containing dynamic crosslinks with a large dissociation rate constant enable cell force-induced network reorganization, which results in rapid stellate spreading, assembly, mechanosensing, and differentiation of encapsulated stem cells when compared to similar hydrogels containing dynamic crosslinks with a low dissociation rate constant. Furthermore, the static and precise conjugation of cell adhesive ligands to the hydrogel subnetwork connected by such fast-dissociating crosslinks is also required for ultra-rapid stellate spreading (within 18 h post-encapsulation) and enhanced mechanosensing of stem cells in 3D. This work reveals the correlation between microscopic cell behaviours and the molecular level binding kinetics in hydrogel networks. Our findings provide valuable guidance to the design and evaluation of supramolecular biomaterials with cell-adaptable properties for studying cells in 3D cultures.

3D cell-printing of tendon-bone interface using tissue-derived extracellular matrix bioinks for chronic rotator cuff repair

The tendon-bone interface (TBI) in rotator cuffs exhibits a structural and compositional gradient integrated through the fibrocartilaginous transition. Owing to restricted healing capacity, functional regeneration of the TBI is considered a great clinical challenge. Here, we establish a novel therapeutic platform based on 3D cell-printing and tissue-specific bioinks to achieve spatially-graded physiology for functional TBI regeneration. The 3D cell-printed TBI patch constructs are created via a spatial arrangement of cell-laden tendon and bone-specific bioinks in a graded manner, approximating a multi-tissue fibrocartilaginous interface. This TBI patch offers a cell favorable microenvironment, including high cell viability, proliferative capacity, and zonal-specific differentiation of encapsulated stem cells for TBI formation in vitro. Furthermore, in vivo application of spatially-graded TBI patches with stem cells demonstrates their regenerative potential, indicating that repair with 3D cell-printed TBI patch significantly accelerates and promotes TBI healing in a rat chronic tear model. Therefore, our findings propose a new therapeutic strategy for functional TBI regeneration using 3D cell-printing and tissue-specific decellularized extracellular matrix bioink-based approach.

Silk Fibroin: An Ancient Material for Repairing the Injured Nervous System.

Silk refers to a family of natural fibers spun by several species of invertebrates such as spiders and silkworms. In particular, silkworm silk, the silk spun by Bombyx mori larvae, has been primarily used in the textile industry and in clinical settings as a main component of sutures for tissue repairing and wound ligation. The biocompatibility, remarkable mechanical performance, controllable degradation, and the possibility of producing silk-based materials in several formats, have laid the basic principles that have triggered and extended the use of this material in regenerative medicine. The field of neural soft tissue engineering is not an exception, as it has taken advantage of the properties of silk to promote neuronal growth and nerve guidance. In addition, silk has notable intrinsic properties and the by-products derived from its degradation show anti-inflammatory and antioxidant properties. Finally, this material can be employed for the controlled release of factors and drugs, as well as for the encapsulation and implantation of exogenous stem and progenitor cells with therapeutic capacity. In this article, we review the state of the art on manufacturing methodologies and properties of fiber-based and non-fiber-based formats, as well as the application of silk-based biomaterials to neuroprotect and regenerate the damaged nervous system. We review previous studies that strategically have used silk to enhance therapeutics dealing with highly prevalent central and peripheral disorders such as stroke, Alzheimer’s disease, Parkinson’s disease, and peripheral trauma. Finally, we discuss previous research focused on the modification of this biomaterial, through biofunctionalization techniques and/or the creation of novel composite formulations, that aim to transform silk, beyond its natural performance, into more efficient silk-based-polymers towards the clinical arena of neuroprotection and regeneration in nervous system diseases.

Enzymatically Cross-linked Hydrogels Based on Synthetic Poly(α-amino acid)s Functionalized with RGD Peptide for 3D Mesenchymal Stem Cell Culture.

Injectable hydrogel scaffolds combined with stem cell therapy represent a promising approach for minimally invasive surgical tissue repair. In this study, we developed and characterized a fully synthetic, biodegradable poly(N5-(2-hydroxyethyl)-l-glutamine)-based injectable hydrogel modified with integrin-binding arginine-glycine-aspartic acid (RGD) peptide (PHEG-Tyr-RGD). The biodegradable hydroxyphenyl polymer precursor derivative of PHEG-Tyr was enzymatically cross-linked to obtain injectable hydrogels with different physicochemical properties. The gelation time, gel yield, swelling behavior, and storage modulus of the PHEG-Tyr hydrogels were tuned by varying the concentrations of the PHEG-Tyr precursors and horseradish peroxidase as well as the nH2O2/nTyr ratio. The mechanical properties and gelation time of the PHEG-Tyr hydrogel were optimized for the encapsulation of rat mesenchymal stem cells (rMSCs). We focused on the 2D and 3D spreading and viability of rMSCs within the PHEG-Tyr-RGD hydrogels with different physicochemical microenvironments in vitro. Encapsulation of rMSCs shows long-term survival and exhibits cell-matrix and cell-cell interactions reflective of both the RGD concentration and hydrogel stiffness. The presented biomaterial represents a suitable biological microenvironment to guide 3D spreading and may act as a promising 3D artificial extracellular matrix for stem cell therapy.

Characteristics and biologic effects of thermosensitive quercetin-chitosan/collagen hydrogel on human periodontal ligament stem cells.

Thermosensitive hydrogels could function as scaffolds and delivery vehicle of natural flavonoids. The current study aimed to investigate effects of chitosan/collagen ratios on properties of thermosensitive beta-glycerophosphate (bGP) chitosan/collagen hydrogels as delivery vehicle of quercetin and then examined effects of quercetin-hydrogels on growth and cell viability of human periodontal ligament stem cells (hPDLSCs). Microstructure and physical, mechanical and antioxidant properties and quercetin release profiles of the hydrogels were investigated. Fourier transform infrared spectroscopy and X-ray powder diffraction analyses were performed to examine gelation process of the hydrogels. Antioxidant assays were conducted to measure antioxidant capacity of quercetin-hydrogels. It was found that bGP-chitosan/collagen hydrogels exhibited porous structures with interconnected pore architecture and could sustain quercetin release. Chitosan content improved well defined porous structure, increased porosity of the hydrogels and decreased releasing rate of quercetin from the hydrogels. The quercetin-bGP-2:1 (wt/wt) chitosan/collagen hydrogels exhibited antioxidant capacity and were able to promote growth of hPDLSCs in a dose dependent manner. In conclusion, the thermosensitive quercetin-bGP-2:1 (wt/wt) chitosan/collagen hydrogel demonstrated optimal properties of scaffolds for bone tissue engineering and sustained release of natural flavonoids. Incorporating quercetin in the chitosan/collagen hydrogel enhanced bioactive microenvironment that supported stem cell encapsulation.

NaHS-Hydrogel and Encapsulated Adipose-Derived Stem Cell Evaluation on an Ex Vivo Second-Degree Burn Model

Second-degree burns result in the loss of the epidermal barrier and could lead to delayed complications during the healing process. Currently, therapeutic options to treat severe burns are limited. Thus, this work aims to evaluate the effect of NaHS, a hydrogen sulfide (H2S) donor, in poloxamer hydrogel in topical application and the potentiating effect of injected encapsulated adipose-derived stem cells (ASCs) compared to monolayer ASCs using our previous second-degree burn model on human skin explants. Indeed, our model allows testing treatments in conditions similar to a clinical application. The observed benefits of NaHS may include an antioxidant role, which might be beneficial in the case of burns. Concerning ASCs, their interest in wound healing is more than well documented. In order to evaluate the efficiency of our treatments, we analyzed the kinetics of wound closure, keratinocyte proliferation, and dermal remodeling. The effect of NaHS led to a delay in re-epithelialization, with a decrease in the number of proliferating cells and a decrease in the synthesis of procollagen III. On the contrary, intradermal injection of ASCs, encapsulated or not, improves wound healing by accelerating re-epithelialization and collagen I synthesis; however, only encapsulated ASCs accelerate keratinocyte migration and increase the rate of procollagen III and collagen III. In conclusion, NaHS treatment did not improve burn healing. However, the injection of ASCs stimulated wound healing, which is encouraging for their therapeutical use in burn treatment.

Long-Term Human Hematopoietic Stem Cell Culture in Microdroplets.

We previously reported a new approach for micromanipulation and encapsulation of human stem cells using a droplet-based microfluidic device. This approach demonstrated the possibility of encapsulating and culturing difficult-to-preserve primary human hematopoietic stem cells using an engineered double-layered bead composed by an inner layer of alginate and an outer layer of Puramatrix. We also demonstrated the maintenance and expansion of Multiple Myeloma cells in this construction. Here, the presented microfluidic technique is applied to construct a 3D biomimetic model to recapitulate the human hematopoietic stem cell niche using double-layered hydrogel beads cultured in 10% FBS culture medium. In this model, the long-term maintenance of the number of cells and expansion of hHSCS encapsulated in the proposed structures was observed. Additionally, a phenotypic characterization of the human hematopoietic stem cells generated in the presented biomimetic model was performed in order to assess their long-term stemness maintenance. Results indicate that the ex vivo cultured human CD34+ cells from bone marrow were viable, maintained, and expanded over a time span of eight weeks. This novel long-term stem cell culture methodology could represent a novel breakthrough to improve Hematopoietic Progenitor cell Transplant (HPT) as well as a novel tool for further study of the biochemical and biophysical factors influencing stem cell behavior. This technology opens a myriad of new applications as a universal stem cell niche model potentially able to expand other types of cells.

Hydrogel Encapsulation of Mesenchymal Stem Cells and Their Derived Exosomes for Tissue Engineering.

Tissue engineering has been an inveterate area in the field of regenerative medicine for several decades. However, there remains limitations to engineer and regenerate tissues. Targeted therapies using cell-encapsulated hydrogels, such as mesenchymal stem cells (MSCs), are capable of reducing inflammation and increasing the regenerative potential in several tissues. In addition, the use of MSC-derived nano-scale secretions (i.e., exosomes) has been promising. Exosomes originate from the multivesicular division of cells and have high therapeutic potential, yet neither self-replicate nor cause auto-immune reactions to the host. To maintain their biological activity and allow a controlled release, these paracrine factors can be encapsulated in biomaterials. Among the different types of biomaterials in which exosome infusion is exploited, hydrogels have proven to be the most user-friendly, economical, and accessible material. In this paper, we highlight the importance of MSCs and MSC-derived exosomes in tissue engineering and the different biomaterial strategies used in fabricating exosome-based biomaterials, to facilitate hard and soft tissue engineering.

Improvement of Heart Function After Transplantation of Encapsulated Stem Cells Induced with miR-1/Myocd in Myocardial Infarction Model of Rat

Cardiovascular disease is one of the most common causes of death worldwide. Mesenchymal stem cells (MSCs) are one of the most common sources in cell-based therapies in heart regeneration. There are several methods to differentiate MSCs into cardiac-like cells, such as gene induction. Moreover, using a three-dimensional (3D) culture, such as hydrogels increases efficiency of differentiation. In the current study, mouse adipose-derived MSCs were co-transduced with lentiviruses containing microRNA-1 (miR-1) and Myocardin (Myocd). Then, expression of cardiac markers, such as NK2 homeobox 5(Nkx2-5), GATA binding protein 4 (Gata4), and troponin T type 2 (Tnnt2) was investigated, at both gene and protein levels in two-dimensional (2D) culture and chitosan/collagen hydrogel (CS/CO) as a 3D culture. Additionally, after induction of myocardial infarction (MI) in rats, a patch containing the encapsulated induced cardiomyocytes (iCM/P) was implanted to MI zone. Subsequently, 30 days after MI induction, echocardiography, immunohistochemistry staining, and histological examination were performed to evaluate cardiac function. The results of quantitative real -time polymerase chain reaction (qRT-PCR) and immunocytochemistry showed that co-induction of miR-1 and Myocd in MSCs followed by 3D culture of transduced cells increased expression of cardiac markers. Besides, results of in vivo study implicated that heart function was improved in MI model of rats in iCM/P-treated group. The results suggested that miR-1/Myocd induction combined with encapsulation of transduced cells in CS/CO hydrogel increased efficiency of MSCs differentiation into iCMs and could improve heart function in MI model of rats after implantation.

Thiol-norbornene gelatin hydrogels: influence of thiolated crosslinker on network properties and high definition 3D printing

Photocrosslinkable gelatin hydrogels are excellent bioinks or biomaterial ink components to serve biofabrication applications. Especially the widely investigated gelatin-methacroyl (gel-MA) hydrogels hold an impressive track record. However, over the past decade, increasing attention is being paid to thiol-ene photo-click chemistry to obtain hydrogel networks benefitting from a faster reactivity (i.e. seconds vs minutes) along with superior biocompatibility and processability. In order to exploit this photo-click chemistry, often an ene-functionality (e.g. norbornene) is introduced onto gelatin followed by crosslinking in the presence of a multifunctional thiol (e.g. dithiothreitol). To date, very limited research has been performed on the influence of the applied thiolated crosslinker on the final hydrogel properties. Therefore, the present work assesses the influence of different thiolated crosslinkers on the crosslinking kinetics, mechanical properties and biological performance of the hydrogels upon encapsulation of primary adipose tissue-derived stem cells which indicated a cell viability exceeding 70%. Furthermore, the different formulations were processed using two-photon polymerization which indicated, in addition to differences in processing window and swelling ratio, a previously unreported phenomenon. At high intensities (i.e. ⩾150 mW), the laser results in cleavage of the gelatin backbone even in the absence of distinct photo-cleavable functionalities. This can have potential to introduce channels or softer regions in gels to result in zones characterized by different degradation speeds or the formation of blood vessels. Consequently, the present study can be used to provide guidance towards tailoring the thiol-ene system towards the desired applications.

Injectable chitin hydrogels with self-healing property and biodegradability as stem cell carriers

To meet the demands of various therapeutic tasks, injectable hydrogels with tunable mechanical properties and degradability are highly desired. Herein, we developed an injectable chitin hydrogel system with well-manipulated mechanical properties and degradability through dynamic acylhydrazone crosslinking catalyzed by 4-amino-DL-phenylalanine (Phe-NH2). The mechanical properties and degradability of the hydrogels could be easily adjusted by varying the solid content, while their gelation time could be maintained at a constant level (∼130 s) by altering Phe-NH2 content, thereby ensuring the good injectability of hydrogels. Moreover, the chitin hydrogels showed excellent self-healing capacity with a healing efficiency up to 95 %. Owing to their superior biocompatibility and biodegradability, the chitin hydrogels could support the proliferation and multi-potent differentiations of rat bone marrow-derived stem cells, serving as a beneficial 3D scaffold for stem cell encapsulation and delivery. This work provides a promising injectable delivery vehicle of therapeutic drugs or cells for tissue regenerative medicine.

Ad-Dressing Stem Cells: Hydrogels for Encapsulation

Regenerative medicine is a novel scientific field that employs the use of stem cells as cell-based therapy for the regeneration and functional restoration of damaged tissues and organs. Stem cells bear characteristics such as the capacity for self-renewal and differentiation towards specific lineages and, therefore, serve as a backup reservoir in case of tissue injuries. Therapeutically, they can be autologously or allogeneically transplanted for tissue regeneration; however, allogeneic stem cell transplantation can provoke host immune responses leading to a host-versus-transplant reaction. A probable solution to this problem is stem cell encapsulation, a technique that utilizes various biomaterials for the creation of a semi-permeable membrane that encases the stem cells. Stem cell encapsulation can be accomplished by employing a great variety of natural and/or synthetic hydrogels and offers many benefits in regenerative medicine, including protection from the host’s immune system and mechanical stress, improved cell viability, proliferation and differentiation, cryopreservation and controlled and continuous delivery of the stem-cell-secreted therapeutic agents. Here, in this review, we report and discuss almost all natural and synthetic hydrogels used in stem cell encapsulation, along with the benefits that these materials, alone or in combination, could offer to cell therapy through functional cell encapsulation.

Dynamic cell-adaptable hydrogels with a moderate level of elasticity promote 3D development of encapsulated cells

Hydrogels stabilized by dynamic reversible crosslinks provide a more permissive three-dimensional (3D) microenvironment to support various behaviors of encapsulated cells. Compared with hydrogels based on dynamic covalent crosslinks, supramolecular hydrogels based on host–guest interactions generally possess higher structural dynamics but lower elasticity due to the highly dynamic nature of the host–guest interactions. Herein, we first preassemble thiolated β-cyclodextrin (CD-SH) with adamantane-grafted hyaluronic acid (HA-Ada) before reacting with maleimide-grafted HA (HA-Mal) via the thiol–ene click reaction to fabricate host–guest hydrogels (HAHG) with a highly dynamic network. Furthermore, a minor fraction of covalent crosslinking can be easily incorporated into the hydrogel network by using multivalent CD-SH as the crosslinker to produce HAHG hydrogels with varying residual elasticity (RE) while keeping the hydrogel chemical composition unchanged. We demonstrated that HAHG hydrogels with a moderate level of RE best support the 3D spreading and intercellular interactions of encapsulated stem cells. This work provides an easy strategy to prepare cell-adaptable dynamic hydrogels with tunable network elasticity to study the effects of biophysical properties of hydrogel networks on cellular behavior in 3D environments.

Cardiovascular tissue regeneration system based on multiscale scaffolds comprising double-layered hydrogels and fibers

We report a technique to reconstruct cardiovascular tissue using multiscale scaffolds incorporating polycaprolactone fibers with double-layered hydrogels comprising fibrin hydrogel surrounded by secondary alginate hydrogel. The scaffolds compartmentalized cells into the core region of cardiac tissue and the peripheral region of blood vessels to construct cardiovascular tissue, which was accomplished by a triple culture system of adipose-derived mesenchymal stem cells (ADSCs) with C2C12 myoblasts on polycaprolactone (PCL) fibers along with human umbilical vein endothelial cells (HUVECs) in fibrin hydrogel. The secondary alginate hydrogel prevented encapsulated cells from migrating outside scaffold and maintained the scaffold structure without distortion after subcutaneous implantation. According to in vitro studies, resultant scaffolds promoted new blood vessel formation as well as cardiomyogenic phenotype expression of ADSCs. Cardiac muscle-specific genes were expressed from stem cells and peripheral blood vessels from HUVECs were also successfully developed in subcutaneously implanted cell-laden multiscale scaffolds. Furthermore, the encapsulated stem cells modulated the immune response of scaffolds by secreting anti-inflammatory cytokines for successful tissue construction. Our study reveals that multiscale scaffolds can be promising for the remodeling and transplantation of cardiovascular tissue.

An injectable and antibacterial calcium phosphate scaffold inhibiting Staphylococcus aureus and supporting stem cells for bone regeneration

Staphylococcus aureus (S. aureus) is the major pathogen for osteomyelitis, which can lead to bone necrosis and destruction. There has been no report on antibacterial calcium phosphate cement (CPC) against S. aureus. The aims of this study were to: (1) develop novel antibacterial CPC-chitosan-alginate microbead scaffold; (2) investigate mechanical and antibacterial properties of CPC-chitosan-penicillin-alginate scaffold; (3) evaluate the encapsulation and delivery of human umbilical cord mesenchymal stem cells (hUCMSCs). Flexural strength, elastic modulus and work-of-fracture of the CPC-chitosan-penicillin-alginate microbeads scaffold and CPC-chitosan scaffold were evaluated. Penicillin release profile and antibacterial effects on S. aureus were determined. The hUCMSC delivery and release from penicillin-alginate microbeads were investigated. Injectable CPC-chitosan-penicillin-alginate microbeads scaffold was developed for the first time. CPC-chitosan-penicillin-alginate microbeads scaffold had a flexural strength of 3.16 ± 0.55 MPa, matching that of cancellous bone. With sustained penicillin release, the new scaffold had strong antibacterial effects on S. aureus, with an inhibition zone diameter of 32.2 ± 2.5 mm, greater than that of penicillin disk control (15.1 ± 2.0 mm) (p < 0.05). Furthermore, this injectable and antibacterial scaffold had no toxic effects, yielding excellent hUCMSC viability, which was similar to that of CPC control without antibacterial activity (p > 0.05). CPC-chitosan-penicillin-microbeads scaffold had injectability, good strength, strong antibacterial effects, and good biocompatibility to support stem cell viability for osteogenesis. CPC-chitosan-penicillin-microbeads scaffold is promising for dental, craniofacial and orthopedic applications to combat infections and promote bone regeneration.

3D cell-printing of biocompatible and functional meniscus constructs using meniscus‐derived bioink

Meniscus injuries are prevalent in orthopedic diagnosis. The reconstruction of the structural inhomogeneity and anisotropy of the meniscus is a major challenge in clinical practice. Meniscal tissue engineering has emerged as a potential alternative for the treatment of various meniscal diseases and injuries. In this study, we developed three-dimensional (3D) cell-printed meniscus constructs using a mixture of polyurethane and polycaprolactone polymers and cell-laden decellularized meniscal extracellular matrix (me-dECM) bioink with high controllability and durable architectural integrity. The me-dECM bioink provided 3D cell-printed meniscus constructs with a conducive biochemical environment that supported growth and promoted the proliferation and differentiation of encapsulated stem cells toward fibrochondrogenic commitment. In addition, we investigated the in vivo performance of the 3D cell-printed meniscus constructs, which exhibited biocompatibility, excellent mechanical properties, and improved biological functionality. These attributes were similar to those of the native meniscus. Collectively, the 3D cell-printing technology and me-dECM bioink facilitate the recapitulation of meniscus tissue specificity in the aspect of the shape and microenvironment for meniscus regeneration. Further, the developed constructs can potentially be applied in clinical practice.

Reinforced-hydrogel encapsulated hMSCs towards brain injury treatment by trans-septal approach

Encapsulated stem cells in various biomaterials have become a potentially promising cell transplantation strategy in the treatment of various neurologic disorders. However, there is no ideal cell delivery material and method for clinical application in brain diseases. Here we show silk fibroin (SF)-based hydrogel encapsulated engineered human mesenchymal stem cells (hMSCs) to overproduce brain-derived neurotrophic factor (BDNF) (BDNF-hMSC) is an effective approach to treat brain injury through trans-septal cell transplantation in the rat model. In this study, we observed SF induced sustained BDNF production by BDNF-hMSC both in 2D (9.367 ± 1.969 ng/ml) and 3D (7.319 ± 0.1025 ng/ml) culture conditions for 3 days. Through immunohistochemistry using α-tubulin, BDNF-hMSCs showed a significant increased average neurite length of co-cultured neuro 2a (N2a) cells, suggested that BDNF-hMSCs induced neurogenesis in vitro. Encapsulated BDNF-hMSC, pre-labeled with the red fluorescent dye PKH-26, exhibited intense fluorescence up to 14 days trans-septal transplantation, indicated excellent viability of the transplanted cells. Compared to the vehicle-treated, encapsulated BDNF- hMSC demonstrated significantly increased BDNF level both in the sham-operated and injured hippocampus (Hip) through immunoblot analysis after 7 days implantation. Transplantation of the encapsulated BDNF-hMSC promoted neurological functional recovery via significantly reduced neuronal death in the Hip 7 days post-injury. Using magnetic resonance imaging (MRI) analysis, we demonstrated that encapsulated BDNF-hMSC reduced lesion area significantly at 14 and 21 days in the damaged brain following trans-septal implantation. This stem cell transplantation approach represents a critical set up towards brain injury treatment for clinical application.

Encapsulation of Adipose-Derived Mesenchymal Stem Cells in Calcium Alginate Maintains Clonogenicity and Enhances their Secretory Profile.

Adipose-derived mesenchymal stem cells (ASCs) are well known for their secretory potential, which confers them useful properties in cell therapy. Nevertheless, this therapeutic potential is reduced after transplantation due to their short survival in the human body and their migration property. This study proposes a method to protect cells during and after injection by encapsulation in microparticles of calcium alginate. Besides, the consequences of encapsulation on ASC proliferation, pluripotential, and secretome were studied. Spherical particles with a mean diameter of 500 µm could be obtained in a reproducible manner with a viability of 70% after 16 days in vitro. Moreover, encapsulation did not alter the proliferative properties of ASCs upon return to culture nor their differentiation potential in adipocytes, chondrocytes, and osteocytes. Concerning their secretome, encapsulated ASCs consistently produced greater amounts of interleukin-6 (IL-6), interleukin-8 (IL-8), and vascular endothelial growth factor (VEGF) compared to monolayer cultures. Encapsulation therefore appears to enrich the secretome with transforming growth factor β1 (TGF-β1) and macrophage inflammatory protein-1β (MIP-1β) not detectable in monolayer cultures. Alginate microparticles seem sufficiently porous to allow diffusion of the cytokines of interest. With all these cytokines playing an important role in wound healing, it appears relevant to investigate the impact of using encapsulated ASCs on the wound healing process.