Electronic Devices Research Articles

Preparation of High Thermal Conductivity Graphene Films by Rapid Reduction with Low Energy Consumption.

In the domain of smart electronic devices, graphene films play a pivotal role due to their flexibility and high thermal conductivity. Within the realm of fabricating highly thermally conductive graphene films, Joule heating technology has garnered significant attention because of its capability for rapid temperature elevation and reduction of graphitization duration. However, substantial gas emission occurs during the reduction of graphene oxide films using this method, leading to immediate combustion and film fracturing, thereby limiting the rapid and uninterrupted production of graphene films. To address this challenge, a rapid reduction preparation process is introduced. This process initiates with a two-step reduction of graphene oxide films employing a reducing agent to establish gas escape pathways within the graphene films beforehand. Subsequently, the film is pressurized and Joule-heated using a graphite plate, with the entire heating process lasting only 800 s. The resulting graphene film exhibits a remarkable thermal conductivity of up to 1012W/(m·K). This method enhances the production efficiency of high thermal conductivity graphene films and is expected to further reduce production costs.

Enhanced energy storage performance in NBT-based MLCCs via cooperative optimization of polarization and grain alignment

Dielectric ceramics possess a unique competitive advantage in electronic systems due to their high-power density and excellent reliability. Na1/2Bi1/2TiO3-based ceramics, one type of extensively studied energy storage dielectric, however, often experience A-site element volatilization and Ti4+ reduction during high-temperature sintering. These issues may result in increased energy loss, reduced polarization and low dielectric breakdown electric field, ultimately making it challenging to achieve both high energy storage density and efficiency. To address these issues, we introduce a synergistic optimization strategy that combine polarization engineering and grain alignment engineering. First principles calculations and experimental analyses show that the doping of Mn2+ can suppress the reduction of Ti4+ in Na1/2Bi1/2TiO3-based ceramics and enhance ion off-centering displacements, thereby reducing energy loss and improving polarization. In addition, we prepared multilayer ceramic capacitors with grains oriented along the <111> direction using the template grain growth method. This approach effectively reduces electric-field-induced strain by 37% and markedly enhances breakdown electric field by 42% when compared with nontextured counterpart. As a result of this comprehensive strategy, <111 >-textured Na1/2Bi1/2TiO3-based multilayer ceramic capacitors achieve an ultra-high energy density of 15.7 J·cm−3 and an excellent efficiency beyond 95% at 850 kV·cm−1, exhibiting a superior overall energy storage performance.

Modified Arithmetic Optimization Algorithm (MAOA) based torque ripple minimization for a sensorless BLDC motor

ABSTRACT Permanent magnet brushless DC (PM BLDC) motor drives outperform the induction motor drives in terms of performance and improved efficiency. Recent advancements in power electronics technology have improved the application of BLDC drives in a variety of home applications. However, the BLDC motor drives suffer from torque ripple, which causes machine vibration, speed oscillations, and acoustic noise, limiting the application range. In this prelude, an optimization tuning algorithm, namely Modified Arithmetic Optimization Algorithm (MAOA) is suggested in this paper for torque ripple minimization in a sensorless BLDC drive. In this paper, the cuk converter topology with PAM scheme is proposed for the sensorless BLDC drive, and MAOA algorithm is used to improve the gain of the controller. A MATLAB Simulink model is used to validate the results of MAOA tuned BLDC drive.

Optimization of Interference Suppression Algorithm for Polarization Sensitive Conformal Array in Complex Electromagnetic Environment

With the development of modern electronic technology, the electromagnetic environment is becoming increasingly complex, which poses a severe challenge to the normal work of radar, communication and other systems. Polarization sensitive array can more effectively distinguish and suppress interference signals by using polarization information of electromagnetic waves, and improve the signal-to-noise ratio (SNR) and anti-interference ability of the system. Conformal array can be closely attached to the carrier surface, reducing space occupation and improving signal receiving efficiency and accuracy. However, at present, polarization-sensitive conformal arrays still face technical problems in interference suppression, especially in complex electromagnetic environment, how to optimize interference suppression algorithms to improve system performance has become the research focus. In this paper, an adaptive interference suppression algorithm combining spatial-polarization domain processing is proposed. The algorithm digitally processes the received signal, extracts spatial and polarization domain information, constructs the joint feature vector of the signal in spatial and polarization domain, and designs a joint filter in spatial and polarization domain. The minimum mean square error (MMSE) criterion and the least mean square (LMS) algorithm are used to update the weight vector of the filter in real time, enabling the filter to automatically adapt to changes in the electromagnetic environment and achieve optimal interference suppression. Simulation experiments show that the algorithm exhibits good stability and adaptability under different electromagnetic environments, effectively suppressing interference and extracting the desired signal. Compared with traditional interference suppression algorithms based solely on spatial domain, the joint spatial-polarization domain adaptive interference suppression algorithm significantly improves the interference suppression ratio (ISR) and signal-to-interference-plus-noise ratio (SINR) performance indicators, verifying that the introduction of polarization domain information can enhance the effect of interference suppression.

Construction of Covalent Triazine Frameworks with Electronic Donor-Acceptor System for Efficient Photocatalytic C-H Hydroxylation of Imidazole[1,2-α]Pyridine Derivatives.

Covalent triazine frameworks (CTFs) are promising heterogeneous photocatalyst candidates owing to their excellent stability, conjugacy, and tunability. In this study, a series of CTFs decorated with different substituents (H, MeO, and F) were synthesised and utilised as photocatalysts for C-H activation reactions. The corresponding optoelectronic properties could be precisely regulated by the electronic effects of different substituents in the nanopore channels of the CTFs; these CTFs were effective photocatalysts for C-H activation in organic synthesis due to their unique structures and optoelectronic properties. Methoxy-substituted CTF (MeO-CTF) exhibited extraordinary catalytic performance and reusability in C-H functionalization by constructing an electronic donor-acceptor system, achieving the highest yield in the photocatalytic C3-H hydroxylation of 2-phenylimidazole[1,2-α]pyridine. This strategy provides a new scaffold for the rational design of CTFs as efficient photocatalysts for organic synthesis.

A THEORETICAL STUDY OF THE PHYSICAL PROPERTIES OF HEXAGONAL GALLIUM NITRATE USING DENSITY FUNCTIONAL THEORY

First-principles calculations based on density functional theory (DFT) have been used to investigate structural, electronic, optical and thermodynamic aspects of the α-GaN crystal. Based on local density approximations (LDA), Generalized gradient approximation (GGA) and meta-generalized gradient approximation (m-GGA) functional methods, the band gap energies of α-GaN crystals have been estimated as 1.962 eV, 2.069 eV and 2.354 eV. The band gap energies that are presented in these studies are in accordance with the ones from the other experimental and theoretical studies. Besides, our findings give us knowledge about the electronic and optical properties of α-GaN crystal. The band gap energies in the α-GaN crystal are the key factors that define its electrical and optical characteristics. They are the energy range in which the electrons can be exited from the valence band to the conduction band, which in turn affects the material's conductivity and the ability of the material to absorb and emit light. The approximate of our results with the previous researches indicates the reliability of our findings and thus increases our knowledge of α-GaN's electronic and optical phenomena. The orbital characteristics of the Ga and N atoms were found by simulating the density of state and the partial density of state for α-GaN. Besides the analysis of the band structure, density of states and optical properties of the compound we also included. The results show that α-GaN has a direct bandgap, which is at the G point in the Brillouin zone. This is the reason for its great potential for the development of optoelectronic devices. Also, we use the three approximations that are given earlier to find the optical characteristics (the absorption coefficient) of the compound. In addition to that, the thermodynamic properties that can be calculated like Debye temperature, enthalpy, free energy, entropy and heat capacity enable us to understand the thermal behavior of the compound better. The heat capacity of α-GaN is detected to be 17.3 Jmole-1K-1, with a Debye temperature of 824.6K. This research will offer a detailed interpretation of α- G-N, covering all its basic properties and the possible applications in optoelectronic and electronic devices. The results of this study are very important and the new technologies that will be developed based on the α-GaN research will be very beneficial.

Photothermal synergistic curing of one-component epoxy resin adhesive based on active monomer mechanism

ABSTRACT One-component epoxy resin adhesives with Ethylamine-boron trifluoride (BF3-MEA) have become popular choices for electronic applications due to their lower curing temperatures and excellent storage stability. However, in the traditional thermal curing process for these adhesives, which relies on the Active Chain End (ACE) mechanism, the formation of cyclic oligomers can compromise their mechanical performance. In this study, we prepared a series of novel one-component adhesives using Diglycidyl-4,5-epoxy-cyclohexane-1,2-dicarboxylate (TDE-85) epoxy resin, Bis [4-(diphenylsulfonio) phenyl] sulfide bis (hexafluoroantimonate) (Photoinitiator 1176), and BF3-MEA through blending, and successfully achieved photothermal dual-curing. We systematically explored various adhesive ratios and curing conditions. Compared to adhesives treated solely by thermal curing, those subjected to photothermal dual-curing exhibited the best shear strength of 13.9 ± 0.7 MPa and a hardness of 88 ± 4 Shore A, representing improvements of 118.2% and 18.9%, respectively. Additionally, the study demonstrated that hydroxyl groups produced by photocuring effectively inhibit the ACE mechanism and promote the Active Monomer (AM) mechanism, which becomes dominant. In summary, the photothermal synergistic curing approach, with the AM mechanism as dominant, prevents the formation of cyclic oligomers and enhances mechanical performance. This study offers a new approach for adhesives used in electronic devices.

Heteroepitaxial Growth of NiO Thin Films on (‐201) β‐Ga2O3 by Mist Chemical Vapor Deposition

The growth of NiO epitaxial thin films on (‐201) β‐Ga2O3 by mist chemical vapor deposition (CVD) and the effects of carrier gas selection (N2 and O2) and substrate preannealing treatment on the structural and morphological properties on the grown thin films are explored. X‐ray diffraction analysis reveals successful epitaxial growth with the orientation relationship (111) NiO [0‐11] || (‐201) β‐Ga2O3 [010]. As a carrier gas, O2 results in single‐domain NiO films while N2 leads to the formation of rotational domains. Atomic force microscopy and field‐emission scanning electron microscopy confirm the lateral growth of NiO films, thus highlighting the importance of substrate preannealing at 1200 °C in oxygen atmosphere to obtain flat, high‐quality films. The results demonstrate that the method of mist CVD combined with appropriate substrate preparation and carrier gas selection is effective for the growth of high‐quality NiO/β‐Ga2O3 heterostructures. This achievement opens new possibilities for the development of wide‐bandgap p–n heterojunctions, potentially advancing the field of high‐power oxide‐based electronic devices.

Metal‐Free, Light‐Catalyzed ATRP For the Synthesis of Functional PVDF‐Based Block Copolymers and Their Characterization

AbstractThe synthesis and characterization of poly(vinylidene fluoride) (PVDF)‐based block copolymers using a metal‐free light‐catalyzed atom transfer radical polymerization (ATRP) approach are described. A PVDF macroinitiator with C─Br bonds at both ends of the chain is synthesized, and an organic photoredox catalyst (OPRC) is used to control the process. The metal‐free process expands the possibilities for the synthesis and application of PVDF‐based block copolymers, as it allows the use of monomers that is previously incompatible with classical ATRP due to their interaction with metal catalysts. The synthesized block copolymers are characterized structurally and thermally as powder materials and in thin films. Fourier‐transform infrared spectroscopy (FT‐IR) analysis revealed that the crystalline phase of PVDF changes when thin films are formed. Specifically, the disappearance of the FT‐IR peaks related to the gamma phase and the presence of characteristic peaks related to the alpha and beta phases indicate that film formation rearranged the PVDF chains, leading to changes in their crystalline phases. These PVDF‐based block copolymers have unique properties, including high thermal stability, chemical resistance, and piezoelectricity, making them potential candidates for use in various fields, such as biomedical engineering, energy storage, and electronic devices.

Non-linear AC dielectric properties of epoxy composites filled with core–shell SiC particles

Abstract Core–shell structured silicon carbide (SiC)/epoxy (EP) composites exhibit superior non–linear DC conductivity. However, the high voltage alternative current dielectric properties of the composites are rarely reported. In this paper, the time–domain measurement was employed to obtain the basic dielectric characteristics, AC conductivity, and relative permittivity of the SiC/EP and SiC@Al2O3/EP composites under less than the breakdown strength of the SiC/EP (i.e. the amplitude of 1–5 kV mm−1). In addition, in the high AC electric field (i.e. the amplitude of 6–20 kV mm−1), the non–linear AC dielectric properties of the SiC@Al2O3/EP composite are also investigated. The experimental results suggest that the SiC@Al2O3/EP composite shows more obvious non–linear AC dielectric properties than the SiC/EP composite. In the high AC electric field, the AC conductivity of the SiC@Al2O3/EP composite presents the relaxation phenomenon, which is attributed to the excitation field and its derivative. This work lays a foundation for further research on the AC steady–state and transient dielectric properties of the field grading materials, which are widely used to homogenize the nonuniform electric field distribution in many electrical and electronic equipment.

Sustaining 500,000 Folding Cycles through Bioinspired Stress Dispersion Design in Sodium-Ion Batteries.

Developing super-foldable electronic materials and devices presents a significant challenge, as intrinsic conductive materials are unable to achieve numerous true-folding operations (super-foldable) due to limitations from short-range forces of chemical bonds. Consequently, super-foldable batteries remain unexplored. This work focused on sodium-ion batteries as a breakthrough point to advance super-foldable devices. By employing a "2+1" bioinspired strategy, we stepwise designed and assembled super-foldable components, from substrates to electrodes, and to ultimately device. This bioinspired approach completely disperses folding stress and thus prevents the breakage of chemical bonds, enabling the successful fabrication of the first super-foldable ion battery. This battery can withstand true-folding at any angle, in any direction, and for an unprecedented number of cycles-far outperforming current foldable phones with hinge structures. Remarkably, after 500,000 true-folding cycles, the battery's microstructure remains intact with no significant degradation of electrochemical performance. Real-time dynamic folding observations reveal an M-shaped folding structure within the bioinspired materials, which effectively disperses stress via bulged layers, dispersed arcs, and slidable microgrooves that work together across different directions and dimensions to achieve super-foldability. Mechanical simulations vividly verify this principle. This work represents a breakthrough in super-foldable devices, offering valuable insights and promoting practical application for future super-foldable devices.

Self-Powered Tactile Sensors Embedded with Self-Healing Electrodes for Multifunctional Applications.

Tactile-based sensing technology represents one of the most promising methods for interacting with their surrounding environment. Consequently, flexible tactile sensing has garnered significant attention from researchers worldwide. In this study, triboelectricity and piezoelectricity were combined to propose a multifunctional self-powered tactile sensor (MSPTS). Notably, new and innovative self-healing electrodes were embedded and synthesized from HPDMS (poly(dimethylsiloxane)) and boric acid in the MSPTS, MSPTS demonstrated a linear detection range of 0.25-5 kPa with a sensitivity of 246.28 mV/kPa, indicating substantial improvements in sensor sensitivity, output performance, and anti-interference capability. Our method of forming hydrogen bonds between a self-healing material (SHM) and a liquid metal (LM) effectively addressed the issue of LM leakage within the flexible matrix under pressure, thus preventing sensor failure. The borate dynamic bonding conferred self-healing properties to the electrode when it was damaged. The MSPTS was successfully applied to pressure detection, material identification, and human body movement detection, significantly broadening the application range of flexible electronic devices.

Hollow core-shell structured Fe3O4@Polypyrrole composites for enhanced electromagnetic wave absorption

Due to the rapid development of electronic devices, the electromagnetic pollution has become increasingly serious. Developing electromagnetic wave absorption (EWA) materials with lightweight, strong absorption capacity and wide effective absorption bandwidth (EAB) becomes a research hotspot. In this work, the hollow-Fe3O4@polypyrrole (HFO@PPy) composites with core-shell structure were successfully synthesized by in situ polymerization method. The electromagnetic parameters could be adjusted by controlling the content of HFO in HFO@PPy. In addition, HFO@PPy composites show both dielectric and magnetic losses. The synergistic effect of both two losses contributes to an enhanced electromagnetic attenuation. The enhanced impedance matching is achieved by the composition (HFO and PPy) and designed unique structure (core-shell and hollow structure). The maximum reflection loss (RL) and EAB are −52.01 dB and 2.72 GHz at 3.1 mm for 60.0 wt% HFO@PPy composites. Therefore, by reasonably regulating the component content and optimizing the structural design, the EWA performance of HFO@PPy composites could be effectively improved, providing a significant inspiration for fabrication of microwave absorbers.

Magnetic structure and colossal dielectric properties in Ga3+ substituted Zn2Y hexaferrites by chemical co-precipitation method

Y-type Ba0.5Sr1.5Zn2Fe12-xGaxO22 (x = 0.0, 0.2, 0.4, 0.6, 0.8 and 1.0) hexaferrites are prepared through modified chemical co-precipitation method. X-ray diffraction (XRD) results reveal that these samples are single-phase and the space group is R3‾m. The field-emission scanning electronic microscope (FE-SEM) measurements indicate that the grains are hexagonal-plate with a diameter of 2–5 μm. In the M-T diagrams, various magnetic structures are modulated, including proper-screw, longitudinal conical (LC), mixed conical (MC), and collinear ferrimagnetic (collinear FIM). In this series of samples, the values of dielectric constant (ε′) achieve an order increase from 102 to 104. For the best x = 0.8 sample, the ε′ is as high as 1804.76 at 1 MHz and 300 K. In conclusion, Ba0.5Sr1.5Zn2Fe12-xGaxO22 with controllable magnetic structures and colossal dielectric constant are potential materials for miniaturization of modern electronic devices.

Transformation of Digital Health: Advancing Telerehabilitation with Smartwatch Technology

The emergence of innovative electronic devices hasrevolutionized the role of medicine, specificallytelemedicine and telerehabilitation. A smartwatch is similarin shape to a traditional wristwatch with a built-in,networked computer with an array of sensors. The use ofsmartwatches has provided healthcare workers with newopportunities for monitoring and managing health.Monitoring of vitals like heart rate, blood pressure, andoxygen saturation, has been made possible by the help ofsmartwatches. These features provide the wearer with areal-time picture of their health. Monitoring of vital healthparameters over time can help detect irregularities inhealth status and can also be used for remote patientmonitoring. This enables healthcare professionals tomonitor their patient's health from anywhere.Smartwatches are being used in physical rehabilitationnowadays for monitoring vitals during physical therapyand tracking the progress of the wearer. This mini-reviewdiscusses insights into the benefits of using smartwatchesin healthcare, and focuses on the evolving role ofsmartwatches in telerehabilitation.

Room-temperature non-volatile optical manipulation of polar order in a charge density wave

Utilizing ultrafast light-matter interaction to manipulate electronic states of quantum materials is an emerging area of research in condensed matter physics. It has significant implications for the development of future ultrafast electronic devices. However, the ability to induce long-lasting metastable electronic states in a fully reversible manner is a long-standing challenge. Here, by using ultrafast laser excitations, we demonstrate the capability to manipulate the electronic polar states in the charge-density-wave material EuTe4 in a non-volatile manner. The process is completely reversible and is achieved at room temperature with an all-optical approach. Each induced non-volatile state brings about modifications to the electrical resistance and second harmonic generation intensity. The results point to layer-specific phase inversion dynamics by which photoexcitation mediates the stacking polar order of the system. Our findings extend the scope of non-volatile all-optical control of electronic states to ambient conditions, and highlight a distinct role of layer-dependent phase manipulation in quasi-two-dimensional systems with inherent sublayer stacking orders.

Radioprotective effects of melatonin therapy against testicular oxidative stress: a systematic review and meta-analysis of rodent models

Background: Radiation exposure is a concern in today’s world, given the widespread use of electronic devices and medical procedures involving ionizing and non-ionizing radiation. Radiations may cause male infertility by inducing oxidative stress in testicular tissue. Melatonin has antioxidant properties. Methods: We systematically reviewed the literature for the studies that have investigated the effects of melatonin therapy on radiation-induced oxidative stress in rodents’ testicular tissue. PubMed, Scopus, and Web of Science were searched for relevant animal trials. Standardized mean difference and 95% confidence intervals were used to pool the data. Subgroup and sensitivity analyses were done. The risk of bias was assessed using SYRCLE tool. Results: Outcomes: histopathology and sperm analyses (testicular apoptotic cells, Johnsen’s testicular biopsy score, seminiferous epithelial height, tubular diameter, sperm motility, viability, count, and morphology, concentration of spermatid, spermatocyte, and spermatogonia), body and testes weights (absolute and relative body and testicular weights), reproductive hormones (serum prolactin, FSH, and testosterone), and oxidative stress tissue markers (TBARS, CAT, GSH, GSH-Px, MDA, SOD, and XO, and total antioxidant capacity). Rats and mice were exposed to electromagnetic radiations (gamma, roentgen, microwave, radiofrequency, and high-power line energy) and particle waves (radioiodine and carbon-ion). Melatonin therapy was significantly associated with improved male reproduction. Conclusion: Radiation exposure harms male fertility, but melatonin, as an antioxidant, is potentially associated with improved male reproductive function in rodents. Inconsistencies in research require further investigations.

Design of a thermoelectric cooler to control the temperature of telecom outdoor cabinet

This paper discusses the design of a thermoelectric cooler (TEC) system for controlling the temperature of telecom outdoor cabins. Traditional cooling methods, such as refrigerants, have potential negative impacts on the environment, making thermoelectric cooling systems a promising alternative due to their efficiency, environmental friendliness, and versatility. The paper reviews the current state of the art in designing thermoelectric cooler systems for absorbing heat generated from telecom electronic devices. The literature review highlights studies that have evaluated the cooling performance, energy efficiency, and cost-effectiveness of thermoelectric cooling systems for telecom electronic devices. The objective of this project is to design a TEC system that can absorb the heat generated from telecommunication cabinets. The design is generated analytically using the TE ideal equation with a heat sink or heat exchanger system. The design aims to investigate the optimum current and geometric ratio that can improve the cooling capacity of the TEC system. The paper also presents a modeling approach for thermoelectric coolers with two heat sinks. The study concludes that thermoelectric cooling systems have the potential to provide efficient and environmentally friendly cooling solutions for telecom electronic devices, and future studies should continue to investigate and optimize the design of thermoelectric cooling systems for various types of telecom electronic devices.

A graphite thermal Tesla valve driven by hydrodynamic phonon transport.

The Tesla valve benefits the rectification of fluid flow in microfluidic systems1-6 and inspires researchers to design modern solid-state electronic and thermal rectifiers referring to fluid-rectification mechanisms in a liquid-state context. In contrast to the rectification of fluids in microfluidic channels, the rectification of thermal phonons in micro-solid channels presents increased complexity owing to the lack of momentum-conserving collisions between phonons and the infrequent occurrence of liquid-like phonon flows. Recently, investigations and revelations of phonon hydrodynamics in graphitic materials7-10 have opened up new avenues for achieving thermal rectification. Here we demonstrate a phonon hydrodynamics approach to realize the rectification of heat conduction in isotopically enriched graphite crystals. We design a micrometre-scale Tesla valve within 90-nm-thick graphite and experimentally observe a discernible 15.2% difference in thermal conductivity between opposite directions at 45 K. This work marks an important step towards using collective phonon behaviour for thermal management in microscale and nanoscale electronic devices, paving the way for thermal rectification in solids.

Radiative heat transfer to enhance the performance of liquid metal-based phase change heat sink under natural convection condition

Liquid metal phase change materials have the advantages of high thermal conductivity and high volumetric latent heat, which are expected to address the growing challenges of thermal management of advanced electronics. In previous studies, the effect of radiative heat transfer from fins of a phase change heat sink on thermal management performance has rarely been considered. In this study, radiative coating materials with high emissivity were prepared and coated on the fins of the liquid metal phase change heat sink. The effect of radiative heat transfer on the performance of liquid metal phase change heat sink was investigated. The experimental results of continuous heating under natural convection conditions show that the introduction of the radiative coating with an emissivity of 0.9298 can extend the time for the surface temperature of the heat source to reach 100 °C by 9.4%, while shortening the recovery time of the phase change heat sink by 14.9%. The results of high-power cyclic heating indicate that the high emissivity coating can reduce the peak temperature by 16.6 °C in the tenth working cycle. A simplified numerical model was subsequently developed and validated to determine the specific effects of phase change and radiative heat transfer on the overall thermal control performance. The radiation-enhanced liquid metal phase change heat sink proposed in this study is simple and maintenance-free. It is expected to address the thermal management issues of electronic devices that cannot use active cooling or operate in thin-air environments.