Effect Of Fat Content Research Articles

Comparative analysis of quality uniformity of ohmic and water bath heating treated pork batter with different fat content

The effects associated with fat content (0% to 40%) of pork batter and the positions (center and surface) on both ohmic heating (OH) and water bath heating (WB) treated samples, were investigated. The OH achieved a more uniform temperature distribution in pork batter as compared to WB- and OH-treated samples showed lower cooking loss values for all samples tested. Besides, the thiobarbituric acid reactive substances values showed a tendency to increase as fat content increased for both treatments. The lipid oxidation showed a positive correlation with the carbonyl content and a negative correlation with the total sulfhydryl groups. The differences of lipids and protein oxidation between the center and surface of OH-treated samples were less than WB-treated ones. The higher fat content showed a favorable protective effect on Escherichia coli O157:H7 by both OH and WB treatments, however, the protective role of fat was more noticeable for OH treatment. Practical applications The ohmic heating (OH) principle is based on electric current passing through the food, the resistance of the food will generate heat in food. The efficiency of OH depends on the electrical conductivity of food. Fat, one of the primary constituents of meat, the presence of fat into the meat has a noticeable effect on the electrical conductivity, cooking loss, lipid and protein oxidation, and inactivation of microorganism. Therefore, the effects of fat content on the electrical, nutritional, and microbiological parameters of OH-treated pork batter at the central and surface position were investigated. The results of this study suggested that OH is suitable for meat processing.

The Complex Effect of Food Matrix Fat Content on Thermal Inactivation of Listeria monocytogenes: Case Study in Emulsion and Gelled Emulsion Model Systems.

Previous studies on the influence of food matrix fat content on thermal inactivation kinetics of food pathogens have shown contradictory results due to the combined influence of fat content and other factors such as composition. Therefore, thermal inactivation of Listeria monocytogenes at 59, 64, and 69°C was systematically investigated in emulsion and gelled emulsion food model systems with various fat content (1, 5, 10, and 20%), such that the effect of fat content was isolated. Thermal conductivity and rheological properties of the model systems were quantified, as well as the effect of these properties on the thermal load of the model systems. Thermal conductivity was complexly related to fat content, the nature of the food matrix (i.e., viscous or gelled), and temperature. For the emulsions, the consistency index K increased with increasing fat content, while the flow behavior index n followed the opposite trend. For the gelled emulsions, the storage modulus G′ was always larger than the loss modulus G″ (i.e., measure of elastic and viscous properties, respectively). The phase angle δ [i.e., arctan (G″/G′)] was proportional with fat content, but this relation became more complex at higher temperatures. The thermal load of the model systems was not largely affected by food matrix fat content. Thermal inactivation of L. monocytogenes was investigated by means of the maximum specific inactivation rate kmax, log reductions, and sublethal injury (SI). Both for emulsions and gelled emulsions, kmax decreased with increasing fat content below approximately 60°C, while a more complex behavior was observed at higher temperatures. In the emulsions, log reductions were considerably lower (i.e., 2–3 log) at 1% fat than in systems with higher fat content. In the gelled emulsions, log reductions generally decreased with increasing fat content. SI decreased with increasing fat content, both in emulsions and gelled emulsions. In conclusion, the inactivation rate (i.e., kmax) of L. monocytogenes was affected by a complex relation between food matrix fat content, thermal conductivity, rheological properties, and inactivation temperature. Due to the small scale of the model systems, differences in kmax did not directly affect the final log reductions in a similar fashion.

Effect of milk fat content on absorption of calcium carbonate and calcium phosphate mixture in Sprague Dawley rats

Calcium absorption of standard milk is influenced by types of fat, other than types of calcium salts, vitamin D, PTH hormone, etc. However, calcium absorption on different fat content, particularly on milk, has not been reported. The purpose of this study was to determine the effect of the fat content of milk on the absorption of calcium carbonate and calcium phosphate mixture in rats. Experiments were conducted using 24 male Sprague Dawley rats fed with low-fat milk (0.5% fat), high-fat milk (26% fat), standard milk (8% fat) and without milk for three weeks. Amount of feed consumed, feces and urine samples were collected to determine the amount of absorbed calcium for five days in the third week. Calcium content in the samples was analyzed using AAS (Atomic Absorption Spectrophotometry). The results showed that there were no difference in calcium carbonate and calcium phosphate absorption among rats fed with low-fat milk, high-fat milk and standard milk. The calcium absorption level from milk reached an average of around 98.67±0.22%. The absorption level of calcium carbonate and calcium phosphate mixture from milk was higher than control rats that were not fed with any milk. Fat content in milk did not affect the absorption of calcium carbonate and calcium phosphate mixture, but the milk consumption could increase the calcium absorption, compared to control.

Goat cheese yield and recovery of fat, protein, and total solids in curd are affected by milk coagulation properties

The aims of the present research were to quantify the effects of each coagulation trait, traditional milk coagulation properties [MCP: rennet coagulation time (RCT), curd-firming time (k20), and curd firmness at 30 min (a30)], and modeled curd-firming over time (CFt) parameters [estimated rennet coagulation time (RCTeq), curd-firming instant rate constant (kCF), and potential curd firmness (CFP)] directly on the following: (1) recovery of 3 milk components in the curd (%REC), (2) 3 measures of cheese yield (%CY), and (3) 3 daily cheese yield traits (dCY) from goat milk. Cheese-making traits were analyzed using 2 mixed different models, the first to test MCP and the second to test CFt parameters. Pearson correlations were also calculated. Significant and favorable relationships (negative for time intervals and positive for CF measures) were found between the traditional MCP and the CFt parameters and %REC and %CY traits. The effects of milk fat and protein contents were particularly important on all cheese-making traits, with the only exception being the effect of fat content on water retention in cheese (%CYWATER). We found an optimum value of milk k20, associated with the highest recovery of components and cheese yield in solids (%CYSOLIDS). In addition, a lower level of curd water retention and an increased fresh curd yield (%CYCURD) were associated with greater recovery of fat. The collection of all available information during the process of milk coagulation and curd-firming allowed us to discover the effect of RCTeq on %REC traits and %CYSOLIDS, which had not previously been revealed for traditional RCT. Moreover, higher kCF values were associated with increased %CYCURD and %CYSOLIDS. Given that CFt parameters showed a high level of independence from one another, these can also be easily used and characterized in future applications at the industry level. Information provided by traditional and modeled coagulation properties could efficiently support the goat dairy industry and lay the foundations for a quality payment scheme for goat milk.

Using particle size and fat content to control the release of Allyl isothiocyanate from ground mustard seeds for its application in antimicrobial packaging

In this study an active antimicrobial packaging based on the controlled release of Allyl isothiocyanate (AITC) from mustard seed was designed. The effect of fat content and particle size of ground mustard seeds on formation and release of AITC was investigated and the underlying mechanisms were highlighted. A smaller size of mustard particles resulted in more sinigrin conversion to AITC and a higher release of AITC in the headspace. The fat content has an important role on AITC release, a decreased fat content decreased AITC levels in the particles and increased the amount of AITC in the headspace. Based on the results of the sinigrin hydrolysis, the AITC surface exchange rate and the AITC fat solubility, an overall picture of the factors influencing the AITC release from the particles is proposed, which describes formation of AITC and its partitioning between the compartments of the particles and the headspace.

Behavior of Listeria monocytogenes during the Manufacture and After HPP of Dry-cured Sausages: Effect of Fat Content and Curing Salts

Behavior of Listeria monocytogenes during the Manufacture and After HPP of Dry-cured Sausages: Effect of Fat Content and Curing Salts

Effects of fat content, pasteurization method, homogenization pressure, and storage time on the mechanical and sensory properties of bovine milk

Fluid milk may be pasteurized by high-temperature short-time pasteurization (HTST) or ultrapasteurization (UP). Literature suggests that UP increases milk astringency, but definitive studies have not demonstrated this effect. Thus, the objective of this study was to determine the effects of pasteurization method, fat content, homogenization pressure, and storage time on milk sensory and mechanical behaviors. Raw skim (<0.2% fat), 2%, and 5% fat milk was pasteurized in duplicate by indirect UP (140°C, 2.3 s) or by HTST pasteurization (78°C, 15 s), homogenized at 20.7 MPa, and stored at 4°C for 8 wk. Additionally, 2% fat milk was processed by indirect UP and homogenized at 13.8, 20.7, and 27.6 MPa and stored at 4°C for 8 wk. Sensory profiling, instrumental viscosity, and friction profiles of all milk were evaluated at 25°C after storage times of 1, 4, and 8 wk. Sodium dodecyl sulfate PAGE and confocal laser scanning microscopy were used to determine protein structural changes in milk at these time points. Fresh HTST milk was processed at wk 7 for wk 8 evaluations. Ultrapasteurization increased milk sensory and instrumental viscosity compared with HTST pasteurization. Increased fat content increased sensory and instrumental viscosity, and decreased astringency and friction profiles. Astringency, mixed regimen friction profiles, and sensory viscosity also increased for UP versus HTST. Increased storage time showed no effect on sensory viscosity or mechanical viscosity. However, increased storage time generally resulted in increased friction profiles and astringency. Sodium dodecyl sulfate PAGE and confocal laser scanning microscopy showed increased denatured whey protein in UP milk compared with HTST milk. The aggregates or network formed by these proteins and casein micelles likely caused the increase in viscosity and friction profiles during storage. Homogenization pressure did not significantly affect friction behaviors, mechanical viscosity, or astringency; however, samples homogenized at 13.8 MPa versus 20.7 and 27.6 MPa showed higher sensory viscosity. Astringency was positively correlated with the friction coefficient at 100 m/s sliding speed (R2 = 0.71 for HTST milk and R2 = 0.74 for UP milk), and sensory viscosity was positively correlated with the mechanical viscosity at a shear rate of 50 s-1 (R2 = 0.90). Thus, instrumental testing can be used to indicate certain sensory behaviors of milk.

Fat Content Modulates Rapid Detection of Food: A Visual Search Study Using Fast Food and Japanese Diet.

Rapid detection of food is crucial for the survival of organisms. However, previous visual search studies have reported discrepant results regarding the detection speeds for food vs. non-food items; some experiments showed faster detection of food than non-food, whereas others reported null findings concerning any speed advantage for the detection of food vs. non-food. Moreover, although some previous studies showed that fat content can affect visual attention for food, the effect of fat content on the detection of food remains unclear. To investigate these issues, we measured reaction times (RTs) during a visual search task in which participants with normal weight detected high-fat food (i.e., fast food), low-fat food (i.e., Japanese diet), and non-food (i.e., kitchen utensils) targets within crowds of non-food distractors (i.e., cars). Results showed that RTs for food targets were shorter than those for non-food targets. Moreover, the RTs for high-fat food were shorter than those for low-fat food. These results suggest that food is more rapidly detected than non-food within the environment and that a higher fat content in food facilitates rapid detection.

Вплив кількості жиру в раціоні корів і pH вмісту рубця на його ферментацію та співвідношення жирних кислот у ліпідах молока

Вплив кількості жиру в раціоні корів і pH вмісту рубця на його ферментацію та співвідношення жирних кислот у ліпідах молока

Effect of fat content on the physical properties and consumer acceptability of vanilla ice cream

Ice cream is a complex food matrix that contains multiple physical phases. Removal of 1 ingredient may affect not only its physical properties but also multiple sensory characteristics that may or may not be important to consumers. Fat not only contributes to texture, mouth feel, and flavor, but also serves as a structural element. We evaluated the effect of replacing fat with maltodextrin (MD) on select physical properties of ice cream and on consumer acceptability. Vanilla ice creams were formulated to contain 6, 8, 10, 12, and 14% fat, and the difference was made up with 8, 6, 4, 2, and 0% maltodextrin, respectively, to balance the mix. Physical characterization included measurements of overrun, apparent viscosity, fat particle size, fat destabilization, hardness, and melting rate. A series of sensory tests were conducted to measure liking and the intensity of various attributes. Tests were also conducted after 19 weeks of storage at -18°C to assess changes in acceptance due to prolonged storage at unfavorable temperatures. Then, discrimination tests were performed to determine which differences in fat content were detectable by consumers. Mix viscosity decreased with increasing fat content and decreasing maltodextrin content. Fat particle size and fat destabilization significantly increased with increasing fat content. However, acceptability did not differ significantly across the samples for fresh or stored ice cream. Following storage, ice creams with 6, 12, and 14% fat did not differ in acceptability compared with fresh ice cream. However, the 8% fat, 6% MD and 10% fat, 4% MD ice creams showed a significant drop in acceptance after storage relative to fresh ice cream at the same fat content. Consumers were unable to detect a difference of 2 percentage points in fat level between 6 and 12% fat. They were able to detect a difference of 4 percentage points for ice creams with 6% versus 10%, but not for those with 8% versus 12% fat. Removing fat and replacing it with maltodextrin caused minimal changes in physical properties in ice cream and mix and did not change consumer acceptability for either fresh or stored ice cream.

Functionality of inulin and polydextrose as sucrose replacers in sugar‐free dark chocolate manufacture – effect of fat content and bulk mixture concentration on rheological, mechanical and melting properties

AbstractInulin and polydextrose are key bulk sugar replacers and have been utilised extensively as functional ingredients due to their fibre and prebiotic claims. This study investigated effects of fat content and bulk mixture concentrations of inulin and polydextrose on rheological properties, mechanical and melting characteristics of sugar‐free dark chocolates sweetened with steviol glycosides. Sucrose was replaced with polydextrose and inulin (0:100, 25:75, 50:50, 75:25, 100:0) at different fat contents (27%, 30% and 33%). Reducing fat content from 33% to 27% had similar effects on the sugar‐free dark chocolates as it did on reference chocolate. Increasing inulin concentrations with simultaneous reduction in polydextrose resulted in consistent increases in Casson plastic viscosity and decreases in Casson yield stress regardless of the fat content. These were explained by microstructural examination of the sugar replacers, which revealed wide variations in network structure. Understanding these factors would help reduce energy load from fat in sugar‐free chocolate confectionery.

Exposure of fluid milk to LED light negatively affects consumer perception and alters underlying sensory properties

Fluid milk consumption per capita in the United States has been steadily declining since the 1940s. Many factors have contributed to this decline, including the increasing consumption of carbonated beverages and bottled water. To meet the challenge of stemming the decline in consumption of fluid milk, the dairy industry must take a systematic approach to identifying and correcting for factors that negatively affect consumers’ perception of fluid milk quality. To that end, samples of fluid milk were evaluated to identify factors, with a particular focus on light-emitting diode (LED) light exposure, which negatively affect the perceived sensory quality of milk, and to quantify their relative effect on the consumer’s experience. Fluid milk samples were sourced from 3 processing facilities with varying microbial postprocessing contamination patterns based on historical testing. The effect of fat content, light exposure, age, and microbiological content were assayed across 23 samples of fluid milk, via consumer, descriptive sensory, and instrumental analyses. Most notably, light exposure resulted in a broad negative reaction from consumers, more so than samples with microbiological contamination exceeding 20,000 cfu/mL on days approaching code. The predominant implication of the study is that a component of paramount importance in ensuring the success of the dairy industry would be to protect fluid milk from all sources of light exposure, from processing plant to consumer.

Effect of fat content in primal cuts of pigs fed diet enriched in n-3 polyunsaturated fatty acids on health-promoting properties of pork

Effect of fat content in primal cuts of pigs fed diet enriched in n-3 polyunsaturated fatty acids on health-promoting properties of pork

Effects of fat content and source as well as of calcium and potassium content in the diet on fat excretion and saponification, litter quality and foot pad health in broilers

Summary Fat content of poultry diets and a formation of soaps from fatty acids and macro minerals in the intestinal tract of animals are often discussed in regard to nutrient digestibility and energy value, but the information about the effects on litter quality and foot pad health is limited. Therefore this study was conducted to investigate the potential impact of fat and soap contents in broilers’ excreta on dry matter (dm) content of excreta and litter as well as on development and severity of foot pad dermatitis. In a first experiment a total of 200 broilers (in two consecutive trials) were housed in floor pens littered with wood shavings and were fed diets differing in fat content (55 or 110Â g/kg dm), fat source (mixed fat, palm oil and palm fatty acid distillate, PFAD) and also in dietary calcium and potassium levels (7.5/6.0 resp. 15.0/14.5Â g/kg dm). Samples of excreta and litter were taken and foot pad health of the birds was recorded weekly according to a macroscopic score of 0 to 8. In a second experiment with 104 broilers half of the birds were exposed daily for 8 hours to litter (wood shavings) enriched with a mix of two soaps (potassium oleat and stearate, 50:50) in a concentration of 2 resp. 5% at different dm contents of the litter (85 resp. 65%). A weekly macroscopically assessment of the foot pad health was done. In Trial 1 high dietary fat contents or the use of palm oil or PFAD led to considerable fat losses via excreta (up to 134Â g/kg dm). If there were, in parallel, high dietary contents of Ca and K, a remarkable saponification was observed (up to 92.9Â g/kg dm), but this did not go along with lower litter quality or higher FPD scores. Also in the 2nd experiment the exposure to high soap contents in the litter did not have negative effects on foot pad health. Only slight lesions were observed over the experimental period. As a result of this study it can be assumed that the formation of soaps in the intestinal tract of broilers from fatty acids and minerals did not have marked influences on the development and severity of foot pad dermatitis. Overall, foot pad health was enhanced by high fat excretion, which might be due to the binding of potassium in soaps. Thus, it could not be absorbed – and therefore would not be excreted via urine and cause poorer litter quality. The observed effect of high dietary fat contents on fat and soap excretion may give reason for a critical assessment regarding energy value and costs, when fat is used at higher dietary levels, especially when substituting cereal energy.

Effect of fat content on characteristics of ice cream fortified with calcium and vitamin D3

Effect of fat content on characteristics of ice cream fortified with calcium and vitamin D3

Effect of fat content and temperature on the translucency of Cheddar cheese

Cheese translucency is influenced by fat content, ripening and temperature and is traditionally determined by CIELAB whiteness. However, translucency is also affected by thickness of materials. The Kubelka-Munk method (K/S) estimates the ratio of absorbance to scatter from whiteness measurements on thin layers of materials above white and black backgrounds. The effect of fat content and temperature on Cheddar cheese translucency was evaluated using K/S and CIELAB methods. Cheddar cheeses varying in fat composition were made and translucency was measured during heating/cooling at 2 and 180 d of ripening. Low fat content in cheese was found to be related to high translucency at <30 °C. At 40 °C, translucency increased due to fat melting. At >60 °C, a reversible protein aggregation led to a reduction of translucency. Translucency increased as cheeses aged. CIELAB and K/S methods were highly correlated; K/S could therefore be useful for estimating cheese translucency.

Effect of milk fat content on the viscoelasticity of mozzarella-type cheese curds

The effect of fat content in cheese curds on their rheological properties was examined using dynamic shear measurements. Surplus fat addition to milk samples caused two distinct types of changes in the temperature dependence of the viscoelastic moduli of resultant curds. The first was a significant reduction in the moduli over a wide temperature range, which is attributed to the presence of liquefied fat globules within the milk protein network. The second was the excess contribution to the low-temperature moduli owing to the reinforcing effect of solidified fat globules. An upward shift in the sol–gel phase transition temperature driven by an increased fat content was also observed.

Effect of fat content on sensory characteristics of marbled beef from Japanese Black steers.

To analyze the sensory characteristics of meat samples with a crude fat content between 23.8% and 48.6% taken from 34 Japanese Black steers, we grilled the meat and subjected it to analytical sensory evaluation. We also measured the amounts of moisture, protein, nucleic acid and glutamic acid. An increase in crude fat content increased the tenderness, juiciness, and fattiness in the meat quality evaluation. An increase in crude fat content reduced the crude protein and moisture contents; it also slightly reduced the nucleic acid and glutamic acid contents, although when the reductions in these umami components were assessed relative to the moisture content they changed little. Increasing the fat content up to a certain point greatly enhanced the umami intensity and beef flavor intensity in the meat quality evaluation and raised the overall evaluation score; the peak of the appropriate crude fat content for these purposes was about 36%.

Effect of Fat Content on Water Sorption Properties of Biscuits Studied by Nuclear Magnetic Resonance

Moisture sorption isotherm is a well established method to characterize water sorption properties and behavior of food materials. However, this approach doesn’t adequately reflect the molecular mobility that taking place during water sorption process. Nuclear magnetic resonance (NMR) can provide information about the water mobility and molecular interactions between water and food components. The biscuits with different fat addition were studied using water sorption isotherm and 1H low-field NMR at and water activity ranging from 0.2 to 0.90, the changes in equilibrium moisture content, transverse relaxation time(T2) and proton intensity of biscuits were defined. The T2 were measured with Carr-Purcell-Meiboom-Gill (CPMG) sequences. It was demonstrated that fat content of biscuits influenced directly the equilibrium moisture content and water status. One or two water populations were observed as the water activity increased, each of which had a distinct relaxation time T2 or molecular mobility. The relaxation time manifested that with the increase of fat addition, the water inside the samples became more mobile, and proton intensity indicated that the amount of water uptake decreased with increasing fat addition. The low-field NMR was demonstrated to provide complementary interpretation to that of water sorption isotherm.

Effect of fat content on sensory and physico‐chemical properties of laboratory‐pasteurised calcium‐ and vitamin D‐fortified mixture of cow and buffalo milk

The influence of milk fat on physico‐chemical properties of calcium and vitamin D‐fortified milk was investigated. Sensory scores, curd tension, viscosity, rennet coagulation time and TBA value increased with the increase in fat content. Calcium and vitamin D fortification had no effect on sensory scores, whereas a significant increase was observed in curd tension and viscosity. The TBA value of fortified milk was significantly lower than that of the unfortified milk. The rennet coagulation time of milk increased significantly with addition of calcium phosphate, whereas calcium citrate fortification had no significant effect. All milk samples were stable to alcohol.