Distinct Color Research Articles

Black Soils in the Eastern Mediterranean: Genesis and Properties

This study investigates the distribution, morphology, and properties of these soils, focusing on areas such as littoral plains, high hilly areas, and rift depression valleys. Black soils occur in the eastern Mediterranean with a limited distribution, and some of them meet the requirements for black soils according to the INBS (International Network of Black Soils), while others do not. Black soils can be categorized into three types based on their genesis and evolution: calcareous black soils (mainly raw rocky rendzina), hydromorphic black soils, and black soil on basalt. While black soils were found in various bioclimatic stages and parent materials, their presence was notably limited in certain areas, contrary to prior indications. A soil morphology analysis revealed distinct color variations and depths, influenced by the accumulation of organic matter for hydromorphic and calcareous black soils and basaltic parent material for black soils on basalt. A particle size analysis indicated texture variations from clay to loam, with no clear indication of illuviation. A chemical analysis showed alkaline pH levels, except in basalt-derived soils, which exhibited a slight acidity. Hydromorphic black soil is the most important in terms of expansion and agricultural use and is only found in limestone marl deposits and lakes in depressions emerging from Dead Sea rifts under conditions of saturation or poor drainage. These soils have a thick, dark moly horizon and a high organic matter content.

A Colorimetric Nanofiber Film Based on Ethyl Cellulose/Gelatin/Purple Sweet Potato Anthocyanins for Monitoring Pork Freshness.

In this study, colorimetric indicator nanofiber films based on ethyl cellulose (EC)/gelatin (G) incorporating purple sweet potato anthocyanins (PSPAs) were designed via electrospinning technology for monitoring and maintaining the freshness of pork. The film presented good structural integrity and stability in a humid environment with water vapor permeability (WVP) of 6.07 ± 0.14 × 10-11 g·m-1s-1Pa-1 and water contact angle (WCA) of 81.62 ± 1.43°. When PSPAs were added into the nanofiber films, the antioxidant capacity was significantly improved (p < 0.05) with a DPPH radical scavenging rate of 68.61 ± 1.80%. The nanofiber films showed distinguishable color changes as pH changes and was highly sensitive to volatile ammonia than that of casting films. In the application test, the film color changed from light pink (fresh stage) to light brown (secondary freshness stage) and then to brownish green (spoilage stage), indicating that the nanofiber films can be used to detect the real-time freshness of pork during storage. Meanwhile, it could prolong the shelf life of pork by inhibiting the oxidation degree. Hence, these results suggested that the EC/G/PSPA film has promising future for monitoring freshness and extending shelf life of pork.

Explaining the green volcanic sunsets after the 1883 eruption of Krakatoa

Abstract. Volcanic sunsets are usually associated with extended and enhanced reddish colours typically complemented by purple colours at higher elevations. However, many eyewitnesses reported remarkably clear and distinct green twilight colours after the eruption of Krakatoa (Sunda Strait, Indonesia) in 1883. To the best of our knowledge, no earlier studies exist providing an explanation for this unusual phenomenon. In the current work, we employ simulations with the SCIATRAN radiative transfer model to investigate the processes leading to green volcanic sunsets. Green sunsets can be simulated based on plausible assumptions by anomalous scattering on stratospheric sulfate aerosols. We investigate the sensitivity of the twilight colours to relevant parameters such as aerosol optical depth (AOD), the parameters of the particle size distribution (PSD), and the amount of ozone. The main requirements for the occurrence of green twilights are a sufficiently large aerosol optical depth combined with particle radii of about 500–700 nm (assuming stratospheric sulfate aerosols) and a preferably narrow aerosol particle size distribution. The occurrence of green twilights after historic eruptions provides important constraints on the particle size of volcanic aerosols.

Regulation of blue infertile flower pigmentation by WD40 transcription factor HmWDR68 in Hydrangea macrophylla 'forever summer'.

WD40 transcription factors are crucial in plant growth and developmental, significantly impacting plant growth regulation. This study investigates the WD40 transcription factor HmWDR68's role in developing the distinctive blue infertile flower colors in Hydrangea macrophylla 'Forever Summer'. The HmWDR68 gene was isolated by PCR, revealing an open reading frame of 1026 base pairs, which encodes 341 amino acids. Characterized by four WD40 motifs, HmWDR68 is a member of the WD40 family. Phylogenetic analysis indicates that HmWDR68 shares high homology with PsWD40 in Camellia sinensis and CsWD40 in Paeonia suffruticosa, both of which are integral in anthocyanin synthesis regulation. Quantitative real-time PCR (qRT-PCR) analysis demonstrated that HmWDR68 expression in the blue infertile flowers of 'Forever Summer' hydrangea was significantly higher compared to other tissues and organs. Additionally, in various hydrangea varieties with differently colored infertile flowers, HmWDR68 expression was markedly elevated in comparison to other hydrangea varieties, correlating with the development of blue infertile flowers. Pearson correlation analysis revealed a significant association between HmWDR68 expression and the concentration of delphinidin 3-O-glucoside, as well as key genes involved in anthocyanin biosynthesis (HmF3H, HmC3'5'H, HmDFR, and HmANS) in the blue infertile flowers of 'Forever Summer' hydrangea (P < 0.01). These findings suggest HmWDR68 may specifically regulate blue infertile flower formation in hydrangea by enhancing delphinidin-3-O-glucoside synthesis, modulating expression of HmF3H, HmC3'5'H, HmDFR and HmANS. This study provides insights into HmWDR68's role in hydrangea's blue flowers development, offering a foundation for further research in this field.

Lanthanide MOFs based portable fluorescence sensing platform: Quantitative and visual detection of ciprofloxacin and Al3+

In the current context of water environmental monitoring and pollution control, there's a crucial need for rapid and simple methods to detect multi-pollutant. We herein report an easy one-step hydrothermal synthesis method to produce Eu-based metal-organic frameworks (Eu MOFs), which was used as a fluorescent probe to detect the aquatic environmental pollutants of ciprofloxacin (CIP) and aluminum ions (Al3+). This fluorescent sensor enabled the cascade detection of CIP and Al3+ through fluorescence enhancement and ratio fluorescence response, respectively. The introduction of CIP significantly turned on the characteristic fluorescence of Eu MOFs at 595 nm and 616 nm through the “antenna effect”. Based on this, the sensor enables quantitative detection of CIP within a linear range of 0–120 μM with a LOD as low as 50.421 nM. In the presence of Al3+, the fluorescence emission of Eu MOFs-CIP was sharply turned off due to strong Al3+ coordination with CIP, while the blue fluorescence emission of CIP was remarkably enhanced. And thus allowing ratio fluorescence quantitative detection of Al3+ (LOD = 2.681 μM). The introduction of CIP and Al3+ in cascade resulted in distinct fluorescence color changes from colorless to red and eventually to blue, exhibiting pronounced fluorescence characteristics. This observable phenomenon enables the visual detection of CIP and Al3+ in both aqueous phase and paper test strips. By combining the analysis of fluorescence chromaticity with the use of a smartphone, the fluorescence color of test papers allows for simple quantitative determination, which provides a convenient and accessible approach for quantifying CIP and Al3+ in water environments.

Opal photonic crystal double‐network hydrogel for visual detection through structural color and fluorescent responsiveness

AbstractPhotonic crystal hydrogels are widely used in the field of visual detection, based on the response of the structural color to external stimulus, such as pH, temperature, near‐infrared light, and so on. Here, we develop an opal photonic crystal hydrogel by combining polystyrene (PS) photonic crystals with a fluorescent double‐network hydrogel and focus on both its visual detection function and mechanical property. The opal hydrogel is composed of nanocomposite hydrogel as the first network and ionic crosslinked hydrogel as the second network. The introduction of PS photonic crystals and terbium ions endows the opal hydrogel distinctive structural colors and fluorescence, respectively. Because of volume changes, the structural color of the opal hydrogel selectively responses to metal ions and organic solvents. Attributing to the ion exchange interaction, the opal hydrogel exhibits fluorescent responses to various metal ions. Combining the responsiveness of structural color and fluorescence, a visual dual‐detection mode is set up, with better detection sensitivity and selectivity. Moreover, the characteristics of nanocomposite and double‐network crosslinking ensure the opal hydrogel enough mechanical properties to undergo cycle visual detection. Consequently, the fabricated opal hydrogel is promising for use in visual detection to multiple substances in single‐ or dual‐detection mode.

Green composite colorimetric and “Turn-on” fluorescent material for the detection of Al3+ ion in blood serum and herbal tea

In the present investigation, we fabricated an ecologically sustainable green composite material derived from green raw materials, including cellulose nanomaterials and Morin. This innovative material underscores its commitment to environmental friendliness and boasts distinctive surface properties that render it an ideal substrate. The selection of this material was motivated by its intricate network structure and inherent capacity for surface modifications. The crux of our methodology involved the integration of the organic probe 2-(2,4-dihydroxyphenyl)-3,5,7-trihydroxychromen-4-one, commonly known as Morin, onto the surface of the cellulose nanocomposite. This strategic embedding of Morin conferred the composite material with exceptional attributes, enabling preconcentration, spectrophotometric determination, and fluorometric turn-on sensing of Al3+ ions. This unique property facilitated the ion-sensing of Al3+ ions in diverse samples, including blood serum and herbal tea.The resultant Morin green composite material exhibited remarkable sensitivity toward Al3+ ions in aqueous solutions, accomplishing extraordinary LOD as low as 0.26 ppb. This heightened sensitivity permits for precise and efficient ion-sensing and enables the detection to be perceptible to the naked eye. Notably, the Morin green composite material displayed a rapid and distinct color change within a brief span of less than two minutes when exposed to varying concentrations of Al3+ ions. Beyond its analytical prowess, the developed Morin green composite material demonstrated significant efficacy in practical applications. Specifically, it showcased remarkable performance in detecting Al3+ ions in serum samples and herbal tea samples.

First report of Truncatella angustata causing leaf blight on Thuja plicata Donn ex D. Don in Canada.

Western redcedar (Thuja plicata Donn ex D. Don) is one of the most important commercial tree species in British Columbia, generates more than $1 billion in economic activity annually and about 8-10 million trees are planted in reforestation efforts (Gregory et al. 2018). It has been selected as the provincial tree of British Columbia (BC) because of its tremendous economic, ecoogical and cultural value. However, foliar diseases such as leaf blights have serious impact on redcedar growth and may cause significant loss of tree volume (Russell, 2007). Our 2014 - 2015 surveys of western redcedar forests in coastal areas of BC indicated high incidence of a distinctive type of blight. We observed the incidence of this disease on more than 80% of western redcedar (approximately 493) trees from late May to early December. Early symptoms appeared as circular to oval, brownish to black spots (2-3 mm), 1-5 spots per branch tip, scattered at the tip margins. Sequentially, the spots enlarged and developed into necrotic lesions on both young and old leaves. More than 50 symptomatic leaves from 10 different trees were collected and rinsed in distilled water then surface-sterilized with three times washing in Tween 20 (%5 solution) for 2 minutes (each time) and %70 ethanol for 30 second (3 times repeat). Tissues from under lesions were placed on MEA (Malt Extract Agar; Phyto Tech® labs-Product ID: M498) and PDA (Potato Dextrose Agar; Phyto Tech® Labs-Product ID: P772). The plates were incubated at 21°C in the dark. They developed distinct dull white to brown, cottony colonies with each black acervuli approximately 450-500µm. The isolates produced fusiform conidia with four cells. They didn't have any distinct color. The conidiophore size was approximately 23-24 x 2-3 µm with mostly hyaline to light brown color, branched and conidiogenous was hyaline and not branched and simple. The spore size was approximately 15-20μm by 7-10μm with three transverse septa and endogenous papillae with hyaline apical appendages. Next, we collected spores and replated them on fresh MEA media culture and placed back in the incubator to produce pure cultures. We studied conidia from leaves of trees mentioned above using light and electron microscopy using Hitachi S-3500N Scanning Electron Microscope (Noshad et al. 2023). After morphological study, further identification to the species level conducted using Zambounis and Wenneker's approach (Zambounis 2019; Wenneker,2017). Genomic DNA from two single-spore isolates were isolated and sequenced. Sequences of ITS (Internal Transcribed Spacer) region amplified using primers ITS1/ITS4 and sequenced. Final sequences were deposited in Genbank and published (accession numbers OP086244 and OP086251). Blast analysis of these sequences showed 99% and 99% resemblances with T. angustata sequence (Sutton 1980). To verify its pathogenicity, we performed a comprehensive pathogenicity test to fulfill Koch's postulates. We collected their distinctive spores in an aseptic environment and standardized them (5000/ml) using a haemocytometer. Then we inoculated 100 western redcedar seedlings (three years old) by injecting standardized spore suspension solution (inoculum) using ultra-fine 0.3ml, 31G, 8mm syringes (approximately 0.1ml per inoculation site). Ten positive control seedlings were inoculated with distilled water and ten negative control seedlings were not inoculated at all. All inoculated (experimental) seedlings demonstrated same symptoms (black spots and characteristic spores) after eight weeks. None of the control seedlings showed any similar symptoms. In the next stage, we isolated and cultured spores from inoculated seedlings and studied them. The identity of reisolates confirmed using DNA sequencing. We used these spores for our next set of disease screening which was successful again. We identified Truncatella angustata (Pers.) Hughes as the causal agent for shoot-tip blight (STB) on western redcedar by examining morphological and molecular characteristics of the pathogen. This is the first report of T. angustata as a primary pathogen on western redcedar in British Columbia, Canada.

Visualizing anions by color changing response: Exploitation of pyrimidine-based probe for simultaneous detection of CN− and F− ions

An easily scalable pyrimidine-based charge-transfer probe has been synthesized that can be utilized for simultaneous detection of both CN− and F− ions. The orange-colored solution of compound turns into yellow upon addition of F− ion, while the spiking of CN- ion leads to a colorless solution. Such color-changes have also been noticed on solid-supported materials, such as modified paper strips. Interestingly, the interaction with F- is found to be rapid as well as reversible (checked against water), while for cyanide ion, the scenario is completely opposite, the interaction is rather slow (∼10 min incubation time), and irreversible. The detailed spectroscopic investigation indicated that F−, being basic in nature, participates in the hydrogen bonding interaction. However, CN− ion, due to its highly nucleophilic character, formed Michael addition reaction product. Both these interactions substantially curtail the extent of intramolecular charge transfer and thereby resulting distinct changes in visible color. Detection of multiple anions via distinct naked-eye color changing response is not very common in the literature and therefore will be beneficial for future development of new sensory systems.

Photoswitching in a Liquid Crystalline Pt(II) Coordination Complex.

Photoswitching of photoluminescence has sparked tremendous research interests for super-resolution imaging, high-security-level anti-counterfeiting, and other high-tech applications. However, the excitation of photoluminescence is usually ready to trigger the photoswitching process, making the photoluminescence readout unreliable. Herein, we report a new photoswitch by the marriage of spiropyran with platinum(II) coordination complex. Viable photoluminescence can be achieved upon excitation by 480 nm visible light while the photoswitching can be easily triggered by 365 nm UV light. The feasible photoswitching may be benefited from the formed liquid crystalline (LC) phase of the designed photoswitch as a crystalline spiropyran is normally unable to implement photoswitching. Compared to the counterparts, this LC photoswitch can show distinct and reliable apparent colors and emission colors before and after photoswitching, which may promise the utility in high-security-level anti-counterfeiting and other advanced information technologies.

Allosteric Probe-Based Colorimetric Assay for Direct Identification and Sensitive Analysis of Methicillin Resistance of Staphylococcus aureus.

The accurate and rapid detection of methicillin-resistance of Staphylococcus aureus (SA) holds significant clinical importance. However, the methicillin-resistance detection strategies commonly require complicated cell lysis and gene extraction. Herein, we devised a novel colorimetric approach for the sensitive and accurate identification of methicillin-resistance of SA by combining allosteric probe-based target recognition with self-primer elongation-based target recycling. The PBP2a aptamer in the allosteric probe successfully identified the target MRSA, leading to the initiation of self-primer elongation based-cascade signal amplification. The peroxidase-like hemin/G-quadruplex undergo an isothermal autonomous process that effectively catalyzes the oxidation of ABTS2- and produces a distinct blue color, enabling the visual identification of MRSA at low concentrations. The method offers a shorter duration for bacteria cultivation compared to traditional susceptibility testing methods, as well as simplified manual procedures for gene analysis. The overall amplification time for this test is 60 min, and it has a detection limit of 3 CFU/ml. In addition, the approach has exceptional selectivity and reproducibility, demonstrating commendable performance when tested with real samples. Due to its advantages, this colorimetric assay exhibits considerable potential for integration into a sensor kit, thereby offering a viable and convenient alternative for the prompt and on-site detection of MRSA in patients with skin and soft tissue infections.

Paper-based colorimetric nanosensor for detecting halides in aqueous media

The selective detection of halides in aqueous samples is crucial for addressing environmental and physiological concerns. Consequently, the development of an affordable, portable, and user-friendly sensing platform for rapid halide detection holds substantial promise. In this study, we present a novel paper-based nanosensor as an appealing alternative for selectively detecting halides in water. This nanosensor leverages the optical properties of silver nanoparticles (ranging from 50 to 250 nm) embedded in epoxy resin and printed on filter paper. We elucidate the colorimetric behavior of this nanosensor in response to specific halides (chloride, bromide, and iodide) upon contact. Importantly, this sensor discerns, through a single measurement, the presence of these halides in aqueous media with remarkable selectivity. The nanosensor manifests distinct color changes in reaction to different halides, particularly at elevated concentrations (ranging from 2 to 400 mM), surpassing the saturation levels observed in other proposed sensors. These discernible color changes are due to the oxidation of silver nanoparticles, changing their morphology and aggregation density, and can be readily detected and analyzed directly from a captured image. Consequently, it demonstrates considerable potential for integration into automated qualitative monitoring devices based on chromaticity analysis.

Packaged europium/fluorescein-based hydrogen bond organic framework as ratiometric fluorescent probe for visual real-time monitoring of seafood freshness

The freshness of sea food has always been the focus of attention from consumers, and food-safety issues are in urgent need of efficient approaches. A HOF-based ratiometric fluorescence probe (HOF-FITC/Eu) featuring superior amine-response, offers the real-time and visual detection of seafood freshness. Via intermolecular hydrogen bond interaction to form hydrogen-bonded organic frameworks (HOFs), which serve as a structural basis for the conjugate loading of pH-sensitive fluorescein (5-FITC) and coordination doping of lanthanide Eu3+. Amine vapors stimulate the dual-wavelength (525 nm and 616 nm) characteristic fluorescence of HOF-FITC/Eu with an inverse trend, resulting in an increase of the ratio of I525 to I616 accompanied by a distinct color transition from red to green. Prepared HOF-FITC/Eu featuring sensitive red-green color change characteristics of amine response are readily dripped into composite films of filter paper through integrated smartphone and 254 nm UV lamp as mobile observation devices to on-site monitor the freshness of raw fish and shrimp samples. The intelligent food probe HOF-FITC/Eu opens a novel material assembly type for fluorescence sensing and a potential pathway for other functional materials in the field of investigational food.

Force-triggered hypso- and bathochromic bidirectional fluorescence switching beyond 120 nm and its anticounterfeiting applications.

Achieving high-contrast tricolor emissive regulation of a single-component molecule using a single type of external stimulus is highly desirable but challenging. In the present study, we report a symmetric acceptor-donor-acceptor (A-D-A)-type aggregation-induced emission-active luminogen, which displays a sequential high-contrast fluorescence switching just by anisotropic mechanical grinding. Specifically, upon light grinding, an orange-yellow-to-blue hypsochromic mechanofluorochromic response with a distinct color contrast (change in the maximum emission wavelength, Δλem,max = 122 nm) is noticed, and the slightly ground solid exhibits a blue-to-red high-contrast (Δλem,max = 185 nm) bathochromic mechanofluorochromic conversion upon vigorous grinding. Thus, using a single luminogen developed here, we can realize wide-range (Δλem,max > 100 nm) hypso- and bathochromic fluorescence mechanochromisms simultaneously. The tricolored mechanofluorochromic phenomenon is attributed to two different morphological transitions involving crystalline-to-crystalline and crystalline-to-amorphous states. Furthermore, three information anticounterfeiting systems are developed using the luminogen presented here.

A mitochondria-targeting fluorescent probe for the dual-emission fluorescence-enhanced detection of hydrogen sulfide and turn-on detection of hydrazine

A fluorescent probe (probe 1) with selectivity and sensitivity for H2S and N2H4 has been developed. Probe 1 exhibits dual-excitation and dual-emission fluorescence response to H2S and fluorescence enhancement toward N2H4 with distinct naked-eye color changes. Moreover, probe 1 displayed low detection limits for H2S and N2H4 of 0.90 nM and 23.6 nM, respectively. The reaction mechanism of probe 1 toward H2S and N2H4 was established using 1H NMR and HR-MS spectroscopy. Additionally, probe 1 was used for monitoring and differentiating H2S and N2H4 in HeLa cells and displays good biocompatibility and low cytotoxicity.

Economic Importance of Consuming Homemade Turmeric: A Case of Kandy District in Sri Lanka

Turmeric or Curcuma longa L. is prized in Sri Lankan cuisine for its delicate flavor, distinct yellow color, and potent aroma. This great spice is highly praised in Ayurveda medicine for its anti- inflammatory properties as well. However, unlike the ancient time, cultivation of turmeric at household level at the recent past was not so significant and the country heavily relies on imported turmeric. Short-time after COVID 19 pandemic in the country, the government banned on non- essential imports including turmeric. Due to very high price and shortage of turmeric in the market and impact of black market of turmeric, while some people adopted to cultivate turmeric in small scale some people did it at large-scales. This study was conducted to study the present situation of consumption of homemade turmeric in Kandy district of the country and understand the economic importance of it. 150 turmeric cultivators were selected for the study. Data collection was conducted using questionnaire survey from June to August 2022. Data analyses were done using descriptive statistics and multiple regression analysis. According to the results, it was discovered that after drying turmeric, convert into a powder and consumed by them. When economic importance are concerned, their average income was found as 11,095.238 rupees per season and average saving was found as 797.13 rupees per person per season. Also a positive relationship was found between consumption of homemade turmeric and its independent variables (family members, monthly income, interest for turmeric, and market price of turmeric) by the study. As a whole, the growers adopted to homemade turmeric as consumption of homemade turmeric is economically and hygienically very important. If there is a good market, most of the turmeric cultivators are willing to grow turmeric continuously. So, they expect proper knowledge related to do cultivation and processing of turmeric. It is very important to pay attention on this and provide proper training programs and good market price for turmeric, in order to enhance the turmeric production of the country in the future. &#x0D; Keywords: Turmeric cultivation, Homemade Turmeric, Consumption, Economic importance

Novel Approach to Color‐Neutral Transparent Solar Cells: An Organic‐Si Hybrid Achieved by Laser Microhole Drilling

AbstractTransparent solar cells (TSCs) hold promise for applications in building‐integrated photovoltaics (BIPVs) and vehicles. However, existing TSCs often have compromised color neutrality and efficiency because of the distinctive colors arising from their photoactive materials. The study proposes a novel fabrication method for TSCs based on Si wafers with the average visible transmittance (AVT) controlled by creating a microhole pattern through a combination of nanosecond laser drilling and subsequent wet etching. Through this ambient‐air process, organic–Si hybrid TSCs are successfully realized by integrating an organic PEDOT:PSS layer onto this structure with a neutral color. The power conversion efficiency (PCE) is adjusted by the fraction of the perforated region, and it attained 6.20% at 30% AVT, 5.37% at 40% AVT, and 4.67% at 50% AVT. In this hybrid TSC approach, the CIE color coordinates are closely aligned with the neutral‐color points (0, 0), resulting in color rendering index (CRI) values exceeding 99. The strategy represents a significant step toward the development of efficient color‐neutral TSCs for transparent solar applications.

Rolling Stone Gathers Moss: Rolling Microneedles Generate Meta Microfluidic Microneedles (MMM)

AbstractMicrofluidic chips play crucial roles while lack satisfactory controllability and comprehensive functionality. Inspired by biological systems, this study proposes a method utilizing rolling microneedles (RMNs) to generate muti‐structured templates, realizing photonic crystal membrane (PC) based meta microfluidic microneedle chip (MMM) for efficient wound management. This approach offers advantages in terms of speed and cost‐effectiveness, achieving dual‐sided permeation and patterned design by directly RMNs at desired locations, serving as both template tools for microneedle fabrication. The integration of RMNs with a PC membrane results in the design of 3D multilayer microfluidic channels, effectively addressing issues related to spontaneous fluid flow. As fluid reaches the PC membrane, it generates distinctive structural colors and exhibits fluorescence enhancement, enabling the monitoring of inflammatory factors in mouse wounds and facilitating efficient wound management. In summary, this preparation method involving RMNs paves the way for the design and fluid control of microfluidic chips. This bioinspired patch holds significant potential not only for wound management but also for areas such as clinical drug delivery and point‐of‐care testing (POCT).

A color-based tumor segmentation method for clinical ex vivo breast tissue assessment utilizing a multi-contrast brightfield imaging strategy.

We demonstrate an automated two-step tumor segmentation method leveraging color information from brightfield images of fresh core needle biopsies of breast tissue. Three different color spaces (HSV, CIELAB, YCbCr) were explored for the segmentation task. By leveraging white-light and green-light images, we identified two different types of color transformations that could separate adipose from benign and tumor or cancerous tissue. We leveraged these two distinct color transformation methods in a two-step process where adipose tissue segmentation was followed by benign tissue segmentation thereby isolating the malignant region of the biopsy. Our tumor segmentation algorithm and imaging probe could highlight suspicious regions on unprocessed biopsy tissue to guide selection of areas most similar to malignant tissues for tissue pathology whether it be formalin fixed or frozen sections, expedite tissue selection for molecular testing, detect positive tumor margins, or serve an alternative to tissue pathology, in countries where these services are lacking.

Unraveling the Molecular Basis of Color Variation in Dioscorea alata Tubers: Integrated Transcriptome and Metabolomics Analysis.

Dioscorea alata L. (Dioscoreaceae) is a widely cultivated tuber crop with variations in tuber color, offering potential value as health-promoting foods. This study focused on the comparison of D. alata tubers possessing two distinct colors, white and purple, to explore the underlying mechanisms of color variation. Flavonoids, a group of polyphenols known to influence plant color and exhibit antioxidant properties, were of particular interest. The total phenol and total flavonoid analyses revealed that purple tubers (PTs) have a significantly higher content of these metabolites than white tubers (WTs) and a higher antioxidant activity than WTs, suggesting potential health benefits of PT D. alata. The transcriptome analysis identified 108 differentially expressed genes associated with the flavonoid synthesis pathway, with 57 genes up-regulated in PTs, including CHS, CHI, DFR, FLS, F3H, F3'5'H, LAR, ANS, and ANR. The metabolomics analysis demonstrated that 424 metabolites, including 104 flavonoids and 8 tannins, accumulated differentially in PTs and WTs. Notably, five of the top ten up-regulated metabolites were flavonoids, including 6-hydroxykaempferol-7-O-glucoside, pinocembrin-7-O-(6″-O-malonyl)glucoside, 6-hydroxykaempferol-3,7,6-O-triglycoside, 6-hydroxykaempferol-7-O-triglycoside, and cyanidin-3-O-(6″-O-feruloyl)sophoroside-5-O-glucoside, with the latter being a precursor to anthocyanin synthesis. Integrating transcriptome and metabolomics data revealed that the 57 genes regulated 20 metabolites within the flavonoid synthesis pathway, potentially influencing the tubers' color variation. The high polyphenol content and antioxidant activity of PTs indicate their suitability as nutritious and health-promoting food sources. Taken together, the findings of this study provide insights into the molecular basis of tuber color variation in D. alata and underscore the potential applications of purple tubers in the food industry and human health promotion. The findings contribute to the understanding of flavonoid biosynthesis and pigment accumulation in D. alata tubers, opening avenues for future research on enhancing the nutritional quality of D. alata cultivars.