DMSO Research Articles

A comparative metabolomic analysis reveals the metabolic variations among cartilage of Kashin-Beck disease and osteoarthritis.

The metabolic variations between the cartilage of osteoarthritis (OA) and Kashin-Beck disease (KBD) remain largely unknown. Our study aimed to address this by conducting a comparative analysis of the metabolic profiles present in the cartilage of KBD and OA. Cartilage samples from patients with KBD (n = 10) and patients with OA (n = 10) were collected during total knee arthroplasty surgery. An untargeted metabolomics approach using liquid chromatography coupled with mass spectrometry (LC-MS) was conducted to investigate the metabolomics profiles of KBD and OA. LC-MS raw data files were converted into mzXML format and then processed by the XCMS, CAMERA, and metaX toolbox implemented with R software. The online Kyoto Encyclopedia of Genes and Genomes (KEGG) database was used to annotate the metabolites by matching the exact molecular mass data of samples with those from the database. A total of 807 ion features were identified for KBD and OA, including 577 positive (240 for upregulated and 337 for downregulated) and 230 negative (107 for upregulated and 123 for downregulated) ions. After annotation, LC-MS identified significant expressions of ten upregulated and eight downregulated second-level metabolites, and 183 upregulated and 162 downregulated first-level metabolites between KBD and OA. We identified differentially expressed second-level metabolites that are highly associated with cartilage damage, including dimethyl sulfoxide, uric acid, and betaine. These metabolites exist in sulphur metabolism, purine metabolism, and glycine, serine, and threonine metabolism. This comprehensive comparative analysis of metabolism in OA and KBD cartilage provides new evidence of differences in the pathogenetic mechanisms underlying cartilage damage in these two conditions.

Analysis of cryopreservation media thermophysical characteristics after ultra-rapid cooling through differential scanning calorimetry

Cryoprotective agents play a critical role in minimizing cell damage caused by ice formation during cryopreservation. However, high concentrations of CPAs are toxic to cells and tissues. Required concentrations of CPAs can be reduced by utilizing higher cooling and warming rates, but insight into the thermophysical properties of biological solutions in the vitrification method is necessary for the development of cryopreservation protocols. Most studies on thermophysical properties under ultra-rapid cooling conditions have been qualitatively based on visualization. Differential scanning calorimetry methods are ideal for studying the behavior of biomaterials in various freezing conditions quantitatively and accurately, though previous studies have been predominantly restricted to slower cooling rates. Here, we developed an ultra-rapid cooling method for DSC that can achieve minimal cooling rates exceeding 2000 °C/min. We investigated the thermophysical vitrification behavior of ternary solutions of phosphate buffer saline (1X), dimethyl sulfoxide or glycerol and ice blocking polymers (X-1000 or Z-1000). We quantified the impact of solute concentration on ice crystal formation during rapid cooling. Our findings support the expectation that increasing the solute concentration reduces the amount of ice formation, including devitrification. Devitrification increases from 0 % to 40 % (v/v) Me2SO and then reduces significantly. The relative amounts of devitrification to the total ice formation are 0 %, 60 %, 0 % in 20 %, 40 %, 60 % (v/v) Me2SO, and 2 %, 48 %, 49 % in 20 %, 40 %, 60 % (v/v) glycerol, respectively. The results suggest that at low concentrations, such as below 20 % (v/v) for Me2SO or glycerol, increasing the warming rate after ultra-rapid freezing is not essential to eliminate devitrification. Furthermore, ice blocking polymers do not reduce ice formation substantially and cannot eliminate devitrification under ultra-rapid cooling conditions. In conclusion, our results provide insights into the impact of solute concentration on ice formation and devitrification during rapid cooling, which can be practical for optimizing cryopreservation protocols.

Development of Macromolecular Cryoprotectants for Cryopreservation of Cells.

Cryopreservation is a common way for long-term storage of therapeutical proteins, erythrocytes, and mammalian cells. For cryoprotection of these biosamples to keep their structural integrity and biological activities, it is essential to incorporate highly efficient cryoprotectants. Currently, permeable small molecular cryoprotectants such as glycerol and dimethyl sulfoxide dominate in cryostorage applications, but they are harmful to cells and human health. As acting in the extracellular space, membrane-impermeable macromolecular cryoprotectants, which exert remarkable membrane stabilization against cryo-injury and are easily removed post-thaw, are promising candidates with biocompatibility and feasibility. Water-soluble hydroxyl-containing polymers such as poly(vinyl alcohol) and polyol-based polymers are potent ice recrystallization inhibitors, while polyampholytes, polyzwitterions, and bio-inspired (glyco)polypeptides can significantly increase post-thaw recovery with reduced membrane damages. In this review, the synthetic macromolecular cryoprotectants are systematically summarized based on their synthesis routes, practical utilities, and cryoprotective mechanisms. It provides a valuable insight in development of highly efficient macromolecular cryoprotectants with valid ice recrystallization inhibition activity for highly efficient and safe cryopreservation of cells.

Intensification of fructose dehydration into 5‐HMF and subsequent oxidation to 2,5‐FDCA using ultrasound

AbstractUltrasound‐assisted dehydration of fructose into 5‐hydroxymethylfurfural (5‐HMF) and subsequent oxidation to furandicarboxylic acid (2, 5‐FDCA) is studied in the current work with the main objective being to elucidate the effectiveness of ultrasound for intensified synthesis. The effect of reaction parameters like ultrasound power, duty cycle, reaction time, reaction temperature, solid to solvent ratio, and fructose concentration on the dehydration of fructose into 5‐HMF has been studied. Optimized conditions established were ultrasonic power of 140 W, duty cycle of 60%, reaction time of 60 min, temperature of 100°C, and fructose:dimethylsulfoxide (DMSO) ratio of 3:100 (g/mL), which resulted in the highest 5‐HMF yield of 96% and fructose conversion of 100%. The conventional method carried out at optimized conditions resulted in only 13.5% as 5‐HMF yield. The obtained 5‐HMF was further oxidized to FDCA using Pd/C as the catalyst, H2O/DMSO as solvent, and K2CO3 as a base also using ultrasonic irradiation at 140 W power and 22 kHz frequency in the presence and absence of O2 as oxidant. 100% conversion of 5‐ HMF was obtained in 30 min and 4 h using ultrasound in the presence of O2 and in absence of O2, respectively. 75% conversion of 5‐HMF was observed using the conventional method in 5 h in the presence of O2. Overall, the intensification benefits of using ultrasound at both steps of synthesis has been successfully elucidated.

Nonlinear composition dependence of hydrogen bond lifetime in water-DMSO binary mixtures: The role of hydrophobic interaction.

The lifetime of a hydrogen bond between water and dimethyl sulfoxide (DMSO) is found to be considerably longer than that between two water molecules in neat water. This is counter-intuitive because the charge on the oxygen in DMSO is considerably less than that in water. Additionally, the strength of the water-dimethyl sulfoxide (w-D) hydrogen bond is found to be strongly composition dependent; the lifetime of the hydrogen bond is ten times larger at 30% than at very low concentrations. Using computer simulations, we perform microscopic structural and dynamic analysis to find that these anomalies arise at least partly from an "action-at-a-distance" effect where the attraction between the hydrophobic methyl groups results in the self-aggregation of DMSO molecules that "cages" both the rotational and linear motions of the molecules involved. This is reflected in the observed strong correlation of the lifetime with the local coordination number of the associated methyl groups. The elongated w-D h-bond lifetime causes a slowdown of collective dynamics and affects the lifetime of the w-w h-bond. This nonlinear feedback mechanism explains the strong composition dependence of viscosity and is anticipated to play a dominant role in many self-assemblies. Furthermore, the w-D hydrogen bond breaking mechanism changes from low to high DMSO concentration, a phenomenon not anticipated a priori. We introduce a new order parameter-based free energy surface of the bond breaking pathway. A two-dimensional transition state rate theory calculation is performed for the lifetime of the w-D h-bond that is found to be semi-quantitatively accurate.

De‐Intercalation of Iodoplumbate(DMSO)x Complex for Uniaxially Oriented Halide Perovskite Thin‐Film Solar Cells

AbstractOrganic lead halide perovskite solar cells (PSCs) have become a viable alternative for next‐generation photovoltaic systems. The significance of reproducibly processing perovskite with less defects comes from the fact that imperfections have a major impact on the solar cell's performance and long‐term stability. Although it is well known that cautious precursor processing has a significant influence on perovskite defect generation, there haven't been extensive investigations on the serial associations between precursor processing, perovskite orientation, and defect generation in PSCs. Making use of a unique precursor chemistry treatment technique that facilitates uniaxially oriented perovskite growth, it is aimed to mitigate defects of sequentially spin‐coated perovskite. Through the temperature‐dependent configurational entropic effect on coordination between iodoplumbate and dimethylsulfoxide (DMSO), a DMSO de‐intercalation processing method is developed. This method enables the induction of uniaxially‐oriented α‐FA0.9MA0.1PbI3‐xBrx (FA: formamidnium, MA: methylammomnium, x < 0.13) perovskite growth parallel to substrates. As a result, this processing delivered significant advances in power conversion efficiency (24.02%) and ambient operational stability under light. This straightforward technique provides a accesible process for producing efficient and stable perovskite solar cells, enabling uniaxially oriented perovskite fabrication without complicated procedures or additional substances.

Investigation of the Effects of Dimethyl Sulfoxide in Experimental Gout with Comparison of Dexamethasone and Indomethacin

Investigation of the Effects of Dimethyl Sulfoxide in Experimental Gout with Comparison of Dexamethasone and Indomethacin

The use of insect cell line Sf21 for ecotoxicity testing.

Insect cell lines are finding utility in many areas of biology, but their application as an in vitro tool for ecotoxicity testing has been given less attention. Our study aimed to demonstrate the utility and sensitivity of Sf21 cells to commonly used fungicides: Propiconazole and CuSO4, as well as dimethyl sulphoxide (DMSO) an industrial solvent. Sf21 cells were readily cultured from frozen stocks in 3-4 days and showed utility as an invertebrate in vitro acute toxicity test. The data showed the threshold levels of cell survivability against propiconazole and CuSO4. The EC50 values were 135.1 μM and 3.31 mM respectively. The LOAEL (lowest observed adverse effect level) was ≈ 1 μM for propiconazole and ≈ 10 μM for CuSO4. Culturing of Sf21 cells in media containing the solvent DMSO showed that 0.5% DMSO concentration did not effect cell viability. Sf21 cells are sensitive and useful as a robust ecologically relevant screening tool for acute toxicity testing.

Isolation, purification, and physio-chemical characterization of melanin pigment from nigerseed hulls (Guizotia abysinica)

Plant melanin, a natural pigment, has gained significant attention recently due to its potential therapeutic and industrial applications. In this study, melanin pigments were extracted from Nigerseed hulls (NH) via alkali and acid extraction methods, followed by acid hydrolysis, organic solvent treatment, and repeated precipitation. The solubility of NH melanin was assessed, revealing solubility in alkali and dimethyl sulfoxide (DMSO) but insolubility in other common organic solvents. High-performance liquid chromatography (HPLC) was employed to measure the purity of NH melanin in comparison to standard melanin, while elemental analysis indicated a similarity between melanin extracted from nigerseed hulls and the standard counterpart. LC-MS data revealed a molecular weight of NH melanin. Furthermore, the stability of melanin was evaluated under varying conditions including temperature, oxidants, reducing agents, light exposure, and metal ion presence. Results demonstrated significant effects of Mg2+, Cu2+, and Fe2+ metal ions on melanin stability, with a minor effect observed for Ca2+, while sodium hyposulfite was found to destabilize the pigments. Our findings suggest that nigerseed hulls hold promise as a novel source for efficient melanin production, with potential applications in the food sector, food packaging, and biomedical fields.

Dimethylene-Cyclopropanide Units as Building Blocks for Fluorescence Dyes.

Many organic dyes are fluorescent in solution. In the solid state, however, quenching processes often dominate, hampering material science applications such as light filters, light-emitting devices, or coding tags. We show that the dimethylene-cyclopropanide scaffold can be used to form two structurally different types of chromophores, which feature fluorescence quantum yields up to 0.65 in dimethyl sulfoxide and 0.53 in solids. The increased fluorescence in the solid state for compounds bearing malonate substituents instead of dicyanomethid ones is rationalized by the induced twist between the planes of the cyclopropanide core and a pyridine ligand.

A crystal capping layer for formation of black-phase FAPbI3 perovskite in humid air.

Black-phase formamidinium lead iodide (α-FAPbI3) perovskites are the desired phase for photovoltaic applications, but water can trigger formation of photoinactive impurity phases such as δ-FAPbI3. We show that the classic solvent system for perovskite fabrication exacerbates this reproducibility challenge. The conventional coordinative solvent dimethyl sulfoxide (DMSO) promoted δ-FAPbI3 formation under high relative humidity (RH) conditions because of its hygroscopic nature. We introduced chlorine-containing organic molecules to form a capping layer that blocked moisture penetration while preserving DMSO-based complexes to regulate crystal growth. We report power conversion efficiencies of >24.5% for perovskite solar cells fabricated across an RH range of 20 to 60%, and 23.4% at 80% RH. The unencapsulated device retained 96% of its initial performance in air (with 40 to 60% RH) after 500-hour maximum power point operation.

Using a triphasic model to describe the permeation of dimethyl sulfoxide in corneoscleral discs

Corneal blindness can be treated by keratoplasty but a lack of readily available corneal donor tissue for this procedure remains a challenge. Cryopreservation can facilitate the long-term storage of tissue but effective protocols for cryopreserving cornea have yet to be developed. Mathematical modelling can guide protocol design, but previously used models are not comprehensive. A comprehensive model should describe the tissue’s shrink−swell response and the cryoprotectant concentration throughout the tissue during cryoprotectant loading. Such a model exists for articular cartilage based on a biomechanical triphasic approach. We explored the applicability of this model for describing cryoprotectant permeation in porcine corneas by fitting it to experimental data for the permeation of dimethyl sulfoxide into porcine corneoscleral discs. The model provided as good of a fit for corneoscleral discs data as it did for articular cartilage data, presenting promise for its use in the design of cryopreservation protocols for corneas.

Collaborative Fabrication of High-Quality Perovskite Films for Efficient Solar Modules through Solvent Engineering and Vacuum Flash System.

The vacuum flash solution method has gained widespread recognition in the preparation of perovskite thin films, laying the foundation for the industrialization of perovskite solar cells. However, the low volatility of dimethyl sulfoxide and its weak interaction with formamidine-based perovskites significantly hinder the preparation of cell modules and the further improvement of photovoltaic performance. In this study, we describe an efficient and reproducible method for preparing large-scale, highly uniform formamidinium lead triiodide (FAPbI3) perovskite films. This is achieved by accelerating the vacuum flash rate and leveraging the complex synergism. Specifically, we designed a dual pump system to accelerate the depressurization rate of the vacuum system and compared the quality of perovskite film formed at different depressurization rates. Further, to overcome the limitations posed by DMSO, we substituted N-methylpyrrolidone as the ligand solvent, creating a stable intermediate complex phase. After annealing, it can be transformed into a uniform and pinhole-free FAPbI3 film. Due to the superior quality of these films, the large area perovskite solar module achieved a power conversion efficiency of 22.7% with an active area of 21.4 cm2. Additionally, it obtained an official certified efficiency of 22.1% with an aperture area of 22 cm2, and it demonstrated long-term stability.

Crystal structure and cryomagnetic study of a mononuclear erbium(III) oxamate inclusion complex.

The synthesis, crystal structure and magnetic properties of an oxamate-containing erbium(III) complex, namely, tetrabutylammonium aqua[N-(2,4,6-trimethylphenyl)oxamato]erbium(III)-dimethyl sulfoxide-water (1/3/1.5), (C16H36N)[Er(C11H12NO3)4(H2O)]·3C2H6OS·1.5H2O or n-Bu4N[Er(Htmpa)4(H2O)]·3DMSO·1.5H2O (1), are reported. The crystal structure of 1 reveals the occurrence of an erbium(III) ion, which is surrounded by four N-phenyl-substituted oxamate ligands and one water molecule in a nine-coordinated environment, together with one tetrabutylammonium cation acting as a counter-ion, and one water and three dimethyl sulfoxide (DMSO) molecules of crystallization. Variable-temperature static (dc) and dynamic (ac) magnetic measurements were carried out for this mononuclear complex, revealing that it behaves as a field-induced single-ion magnet (SIM) below 5.0 K.

L-Proline as a Cryoprotective Agent for the Preservation of Galea Spixii Skin Fibroblasts.

Somatic cell biobanking is a promising strategy for developing reproductive techniques. Although cryopreservation, a technique used for creating biobanks, has been performed on Galea spixii, structural and physiological damage to its cells highlight the need to optimize the cryoprotective solution being used. Therefore, the osmoprotective activity of 5 mM L-proline was evaluated as an alternative cryoprotectant for G. spixii fibroblast conservation. The concentration was defined based on previous studies conducted on mammalian cells. Cells derived from the skin of six individuals were cultured until the fifth passage were cryopreserved under the following treatments: (i) control (non-cryopreserved); (ii) a solution with 10% dimethyl sulfoxide (Me2SO), 10% fetal bovine serum (FBS), and 0.2 M sucrose; (iii) a solution with 10% Me2SO, 10% FBS, and 5 mM L-proline; and (iv) a solution with 10% Me2SO, 10% FBS, 0.2 M sucrose, and 5 mM L-proline. Tests were conducted to analyze cell morphology, viability, metabolism, proliferation, and apoptosis; reactive oxygen species (ROS) levels; and mitochondrial membrane activity (ΔΨm). A reduction in the number of viable cells (72.3% ± 1.2%) was observed in the sucrose-containing group compared to the control (86.7% ± 2.0%) and L-proline (88.4% ± 1.8% and 87.8% ± 2.1%) groups. After apoptotic analysis, a reduction in the number of viable cells was observed in the group with sucrose alone (74.6% ± 4.1%) compared to the control group (88.2% ± 1.1%). The ROS levels (1.03 ± 0.5 and 1.07 ± 0.5, respectively) and ΔΨm values (0.99 ± 0.42 and 1.22 ± 0.73, respectively) observed in the groups with L-proline were similar to that observed in the control group (1.00 ± 0.5 and 1.00 ± 0.4, respectively). Moreover, no difference was observed between groups for cell morphology, metabolism, or proliferation. Thus, L-proline is a cryoprotectant agent that can be used during G. spixii fibroblast cryopreservation, alone or with sucrose. In addition, we developed an adequate biobank for G. spixii, whereby stored cells could be used for reproductive techniques.

Energy saving technology design and multiple performance evaluation for the extractive distillation process to recover benzene and isopropanol from wastewater by mixed entrainer

In the industrial production of chloramphenicol, a ternary azeotrope consisting of isopropanol, benzene and water exists. A new process for the extractive distillation of recycling benzene and isopropanol from wastewater by mixed entrainer was proposed. Quantum chemical analysis and relative volatility analysis were employed to screen suitable entrainers. The multi-objective optimization scheme was established to determine the basic process parameters such as such as composition and ratio. Thermal coupled extractive distillation process and heat pump with an assisted extractive distillation process were used to improve energy saving. Subsequently, the interaction energy between the entrainer and the system was computed via molecular dynamics, and different processes are evaluated by economic analysis, environmental analysis, energy consumption analysis and exergy analysis. The results indicated that the optimal mixed entrainer under decompression pressure, it was 40.37 % dimethyl sulfoxide +59.63 % glycerol. The thermally coupled extractive distillation process 1 has the best economic benefits and has good thermodynamic efficiency and environmental advantages. Compared with ethylene glycol extractive distillation process, total annual cost is reduced by 16.93 % and gas emissions is reduced by 43.19 %.

Lead(II)-Based Coordination Polymer Exhibiting Reversible Color Switching and Selective CO2 Photoreduction Properties.

Herein, we report a new photofunctional Pb-S-based coordination polymer (CP) with the formula [Pb(ATAT)(OAc)]n (ATAT = 3-amino-5-mercapto-1,2,4-triazole, OAc = acetate, CP1). Apart from its photoactive one-dimensional (1D) (-Pb-S-)n chain, CP1 is also composed of another 1D (-Pb-O-)n chain that originates from the coordination with acetate. The coordinated acetate can be exchanged with water (H2O) or dimethyl sulfoxide (DMSO), leading to the formation of a CP1-H2O or CP1-DMSO structure that exhibits a distinct change in optical properties, including a white-to-yellow color change. The structural transformation of CP1 to CP1-H2O and CP1-DMSO, and its subsequent recovery to the original CP1 structure could be controlled by the presence or absence of acetic acid vapor; the transformation was completely reversible. CP1 absorbed light with wavelengths shorter than 390 nm, with an estimated bandgap of 3.18 eV. Density functional theory calculations indicated that the valence band of CP1 is mainly formed by N and S orbitals originating from the ATAT unit, whereas the conduction band is composed of the Pb orbitals. Even without any modification, such as the incorporation of a molecular catalyst, CP1 reduced CO2 into formate under UV light with >99% selectivity.

Enhanced Solubility and Polarization of 13C-Fumarate with Meglumine Allows for In Vivo Detection of Gluconeogenic Metabolism in Kidneys.

Hyperpolarized 13C-labeled fumarate probes tissue necrosis via the production of 13C-malate. Despite its promises in detecting tumor necrosis and kidney injuries, its clinical translation has been limited, primarily due to the low solubility in conventional glassing solvents. In this study, we introduce a new formulation of fumarate for dissolution dynamic nuclear polarization (DNP) by using meglumine as a counterion, a nonmetabolizable derivative of sorbitol. We have found that meglumine fumarate vitrifies by itself with enhanced water solubility (4.8 M), which is expected to overcome the solubility-restricted maximum concentration of hyperpolarized fumarate after dissolution. The achievable liquid-state polarization level of meglumine-fumarate is more than doubled (29.4 ± 1.3%) as compared to conventional dimethyl sulfoxide (DMSO)-mixed fumarate (13.5 ± 2.4%). In vivo comparison of DMSO- and meglumine-prepared 50-mM hyperpolarized [1,4-13C2]fumarate shows that the signal sensitivity in rat kidneys increases by 10-fold. As a result, [1,4-13C2]aspartate and [13C]bicarbonate in addition to [1,4-13C2]malate can be detected in healthy rat kidneys in vivo using hyperpolarized meglumine [1,4-13C2]fumarate. In particular, the appearance of [13C]bicarbonate indicates that hyperpolarized meglumine [1,4-13C2]fumarate can be used to investigate phosphoenolpyruvate carboxykinase, a key regulatory enzyme in gluconeogenesis.

Optimizing the feasibility of polyvinyl alcohol-potassium iodine gel for medical dosimeter

This work aims to improve the post stabilty of reusable potassium iodide hydrogel dosimter. A reusable and low-cost radiochromic dosimeter containing a gel matrix of polyvinyl alcohol, potassium iodide dye, froctose as reducing agent and glutaraldehyde as cross-linking agent was developed for dose calibration in radiotherapy. The gel samples were exposed to different absorbed doses using a medical linear acceleration. UV–vis Spectrophotometry was utilized to investigate the changes in optical-properties of irradiated gels with regard to peak wavelength of 353 nm. The stability of the gel (one of the most limitation of using this dosimeter) was improved significantly by the addition of certain concentrations of dimethyl sulfoxide. The two-dimensional optical imaging system of charge-coupled-device (CCD) camera with a uniform RGB light-emitting-diode (LED) array source was used for diffusion coefficient purpose using two dimensional gel template. The value of diffusion coefficient reported is significant and highly reduced compared with other dosimeters reported in the literatures. Moreover, heating the improved gels to certain temperatures results in resetting their optical properties, which makes it possible to reuse for multiple times.

Molecular engineering of coumarins for enhanced two-photon absorption property

Abstract A series of coumarin-based quadrupolar and octupolar derivatives containing electron-donating substituents (carbazole or diphenylamine groups) were synthesized. Their photophysical properties were explored in different organic solvents (toluene, dichloromethane, and dimethyl sulfoxide). Each donor group was connected via cyclic stilbene based on coumarin, resulting in compounds with large two-photon absorption cross-sections.