DMSO Research Articles

Controlling Tin Halide Perovskite Oxidation Dynamics in Solution for Perovskite Optoelectronic Devices.

As a leading contender to replace lead halide perovskites, tin-based perovskites have demonstrated ever increasing performance in solar cells and light-emitting diodes (LEDs). They tend to be processed with dimethyl sulfoxide (DMSO) solvent, which has been identified as a major contributor to the Sn(II) oxidation during film fabrication, posing a challenge to the further improvement of Sn-based perovskites. Herein, we use NMR spectroscopy to investigate the kinetics of the oxidation of SnI2, revealing that autoamplification takes place, accelerating the oxidation as the reaction progresses. We propose a mechanism consistent with these observations involving water participation and HI generation. Building upon these insights, we have developed low-temperature Sn-based perovskite LEDs (PeLEDs) processed at 60 °C, achieving enhanced external quantum efficiencies (EQEs). Our research underscores the substantial potential of low-temperature DMSO solvent processes and DMSO-free solvent systems for fabricating oxidation-free Sn-based perovskites, shaping the future direction in processing Sn-containing perovskite materials and optoelectronic devices.

Reversal of crystallization in cryoprotected samples by laser editing.

Advances in cryobiology techniques commonly target either the cooling or the warming cycle, while little thought has been given to ≪repair≫ protocols applicable during cold storage. In particular, crystallization is the dominant threat to cryopreserved samples but proceeds from small nuclei that are innocuous if further growth is forestalled. To this end, we propose a laser editing technique that locally heats individual crystals above their melting point by a focused nanosecond pulse, followed by amorphization during rapid resolidification. As a reference, we first apply the approach to ice crystals in cryoprotected solution and use Raman confocal mapping to study the deactivation of crystalline order. Then, we examine dimethyl sulfoxide trihydrate crystals that can germinate at low temperatures in maximally freeze concentrated regions, as commonly produced by equilibrium cooling protocols. We show how to uniquely identify this phase from Raman spectra and evidence retarded growth of laser-edited crystals during warming.

Morphological evaluation of adult domestic cat testicular biopsy after vitrification.

Testicular biopsies (9 mm3) from domestic cats (n = 10) submitted to orchiectomy were submitted to equilibrium vitrification in the presence of ethylene glycol (EG) alone or combined with dimethylsulfoxide (DMSO) as intracellular cryoprotectants, and sucrose or trehalose as extracellular cryoprotectants. The samples were vitrified with 40% EG or 20% EG + 20% DMSO, plus 0.1 M or 0.5 M of sucrose or trehalose. The study was divided into Step 1 and Step 2. In Step 1, intratubular cells (spermatogonia, spermatids, spermatocytes, and Sertoli cells) were quantified and classified as intact or degenerated (pyknotic and/or vacuolated cells). Cryodamage of seminiferous cords was determined by spermatogonia and Sertoli cell scoring of nuclei alterations, tubular basement membrane detachment, epithelium shrinkage, and tubular measures (total area, epithelium area, larger and smaller diameter, and height of the epithelium). In Step 2, Hoechst 33342 stain and propidium iodide (PI) fluorescent stain were used to assess the cell viability of the four best experimental groups in Step 1. The effect of treatments on all analyses was accessed using analysis of variance (ANOVA), and Fisher's post hoc test at P < 0.05 significance was considered. In Step 1, the mean percentage of spermatogonia and Sertoli cells morphological integrity did not show a difference when using both sugars at different concentrations, but their morphology was more affected when DMSO was used. EG use associated with 0.1 M of sucrose or trehalose positively affected spermatocyte and spermatid morphology, respectively. The larger diameter and epithelium height of seminiferous tubules were increased using DMSO plus 0.5 M sucrose and DMSO plus 0.1 M trehalose. The changes in spermatogonial/Sertoli nucleoli visualization were best scored in the EG groups, while the nuclei condensation was lower with sucrose. The basement membrane was satisfactorily preserved with 0.1 M sucrose. In Step 2, the percentage of cell viability was higher when EG plus 0.1 M sucrose was used. Therefore, DMSO's negative effect on the vitrification of testicular biopsies of adult domestic cats was evident. The EG plus 0.1 M of sucrose or trehalose associations are the most suitable CPAs to preserve the testicular histology structure of adult domestic cats in vitrification.

Co-Assembled Supramolecular Organohydrogels of Amphiphilic Zwitterion and Polyoxometalate with Controlled Microstructures

The organization of modifiable and functional building components into various superstructures is of great interest due to their broad applications. Supramolecular self-assembly, based on rationally designed building blocks and appropriately utilized driving forces, is a promising and widely used strategy for constructing superstructures with well-defined nanostructures and diverse morphologies across multiple length scales. In this study, two homogeneous organohydrogels with distinct appearances were constructed by simply mixing polyoxometalate (phosphomolybdic acid, HPMo) and a double-tailed zwitterionic quaternary ammonium amphiphile in a binary solvent of water and dimethyl sulfoxide (DMSO). The delicate balance between electrostatic attraction and repulsion of anionic HPMo clusters and zwitterionic structures drove them to co-assemble into homogeneous organohydrogels with diverse microstructures. Notably, the morphologies of the organohydrogels, including unilamellar vesicles, onion-like vesicles, and spherical aggregates, can be controlled by adjusting the ionic interactions between the zwitterionic amphiphiles and phosphomolybdic acid clusters. Furthermore, we observed an organohydrogel fabricated with densely stacked onion-like structures (multilamellar vesicles) consisting of more than a dozen layers at certain proportions. Additionally, the relationships between the self-assembled architectures and the intermolecular interactions among the polyoxometalate, zwitterionic amphiphile, and solvent molecules were elucidated. This study offers valuable insights into the mechanisms of polyoxometalate-zwitterionic amphiphile co-assembly, which are essential for the development of materials with specific structures and emerging functionalities.

Morphological and Neurological Impairments Induced by Chronic Administration of Dimethyl Sulfoxide in Mice.

We studied the influence of DMSO administered ad libitum with drinking water in concentrations of 0.01, 0.1, and 1% for 4 and 6 weeks on pain sensitivity, motor coordination, and myelin content in the corpus callosum of C57BL/6 mice. After 6-week administration, DMSO in all studied concentrations decreased myelin content in the corpus callosum. Moreover, 4-week administration of 0.1% DMSO and 6-week administration of 1% DMSO increased the latency to fall in the rotarod test by 3.1 (p<0.05) and 5.1 (p<0.001) times, respectively. After 4-week administration of DMSO in concentrations of 0.01 and 0.1%, the latency of the tail flick response increased by 2.1 (p<0.05) and 1.8 times (p<0.001), respectively. Administration of DMSO in concentrations of 0.01 and 1% for 6 weeks led to a decrease of this parameter by 2.7 (p<0.05) and 3.8 times (p<0.01), respectively. Thus, DMSO in all studied concentrations decreased myelin content in the corpus callosum of C57BL/6 mice and modified motor coordination and pain sensitivity of animals.

Dimethyl Sulfoxide (DMSO) as a Potential Source of Interference in Research Related to Sulfur Metabolism—A Preliminary Study

Dimethyl sulfoxide (DMSO), an organosulfur compound, is widely used as the gold standard solvent in biological research. It is used in cell culture experiments and as a component of formulations in in vivo studies. Unfortunately, parameters related to sulfur metabolism are often not taken into account when using DMSO. Therefore, in this work we aim to show that the addition of DMSO to the culture medium (even in amounts commonly considered acceptable) alters some parameters of sulfur metabolism. For this study, we used three cell lines: a commercially available Caco-2 line (HTB-37, ATCC) and two lines created as part of our early studies (likewise previously described in the literature) to investigate the anomalies of sulfur metabolism in mucopolysaccharidosis. As the negative effects of DMSO on the cell membrane are well known, additional experiments with the partial loading of DMSO into polymerosomes (poly(ethylene glycol) methyl ether-block-poly(lactide-co-glycolide), PEG-PLGA) were performed to eliminate these potentially disruptive effects. The results show that DMSO is a source of interference in studies related to sulfur metabolism and that there are not just simple effects that can be corrected in the final result by subtracting control values, since complex synergisms are also observed.

Synthesis, structure and photoluminescence properties of heterometallic-based coordination polymers of trimesic acid.

Reacting trimesic acid (H3TMA, C9H6O6) with CaCl2 and MCl2 at 110 °C under hydrothermal conditions gave the isostructural heterobimetallic coordination polymers (CPs) catena-poly[[tetraaquazinc(II)]-μ-5-carboxybenzene-1,3-dicarboxylato-[tetraaquacalcium(II)]-μ-5-carboxybenzene-1,3-dicarboxylato], [CaZn(HTMA)2(H2O)8]n, 1, and catena-poly[[tetraaquacobalt(II)]-μ-5-carboxybenzene-1,3-dicarboxylato-[tetraaquacalcium(II)]-μ-5-carboxybenzene-1,3-dicarboxylato], [CaCo(HTMA)2(H2O)8]n, 2. Compounds 1 and 2 crystallize in the monoclinic space group C2/c. The solid-state structures consist of eight-coordinate CaII ions and six-coordinate MII ions. These ions are connected by a doubly deprotonated HTMA2- ligand to create a one-dimensional (1D) zigzag chain. Poly[[decaaquabis(μ3-benzene-1,3,5-tricarboxylato)calcium(II)dizinc(II)] dihydrate], {[CaZn2(TMA)2(H2O)10]·2H2O}n, 3, was found incidentally as a minor by-product during the synthesis of 1 at a temperature of 140 °C. It forms crystals in the orthorhombic space group Ccce. The structure of 3 consists of a two-dimensional (2D) layer composed of [Zn(TMA)] chains that are interconnected by CaII ions. The presence of aromatic carboxylic acid ligands and water molecules, which can form numerous hydrogen bonds and π-π interactions, increases the stability of the three-dimensional (3D) supramolecular architecture of these CPs. Compounds 1 and 2 exhibit thermal stability up to 420 °C, as indicated by the thermogravimetric analysis (TGA) curves. The powder X-ray diffraction (PXRD) data reveal the formation of unidentified phases in methanol and dimethyl sulfoxide, while 1 exhibits chemical stability in a wide range of solvents. The luminescence properties of 1 dispersed in various low molecular weight organic solvents was also examined. The results demonstrate excellent selectivity, sensitivity and recyclability for detecting acetone molecules in aqueous media. Additionally, a possible sensing mechanism is also outlined.

Central Carbon Metabolism in Candida albicans Biofilms Is Altered by Dimethyl Sulfoxide

The effect of dimethyl sulfoxide (DMSO) on fungal metabolism has not been well studied. This study aimed to evaluate, by metabolomics, the impact of DMSO on the central carbon metabolism of Candida albicans. Biofilms of C. albicans SC5314 were grown on paper discs, using minimum mineral (MM) medium, in a dynamic continuous flow system. The two experimental conditions were control and 0.03% DMSO (v/v). After 72 h of incubation (37 °C), the biofilms were collected and the metabolites were extracted. The extracted metabolites were subjected to gas chromatography–mass spectrometry (GC/MS). The experiment was conducted using five replicates on three independent occasions. The GC/MS analysis identified 88 compounds. Among the 88 compounds, the levels of 27 compounds were markedly different between the two groups. The DMSO group exhibited enhanced levels of putrescine and glutathione and decreased levels of methionine and lysine. Additionally, the DMSO group exhibited alterations in 13 metabolic pathways involved in primary and secondary cellular metabolism. Among the 13 altered pathways, seven were downregulated and six were upregulated in the DMSO group. These results indicated a differential intracellular metabolic profile between the untreated and DMSO-treated biofilms. Hence, DMSO was demonstrated to affect the metabolic pathways of C. albicans. These results suggest that DMSO may influence the results of laboratory tests when it is used as a solvent. Hence, the use of DMSO as a solvent must be carefully considered in drug research, as the effect of the researched drugs may not be reliably translated into clinical practice.

Pillared graphene oxide frameworks for the adsorption and separation of polar protic and aprotic liquid solvents: The cases of pure water, methanol, dimethyl sulfoxide, and dimethyl sulfoxide-water mixtures.

Potential applications of previously synthesized pillared graphene oxide frameworks with phenyldiboronic acid linkers in the field of the adsorption and separation of polar protic and aprotic liquid solvents have been systematically explored using grand canonical Monte Carlo simulations. Particular attention was initially paid to the adsorption of pure liquid water, methanol, and dimethyl sulfoxide. The results obtained a significant increase in the isosteric heat of adsorption at low uptake in the case of dimethyl sulfoxide, which is about 17.9 and 26.8kJ/mol higher than the values corresponding to methanol and water adsorption. These findings indicated that from a thermodynamic point of view, these pillared graphene oxide frameworks could be used in the separation of dimethyl sulfoxide-water liquid mixtures. Systematic grand canonical Monte Carlo simulations were then subsequently performed for dimethyl sulfoxide-water mixtures, with a low dimethyl sulfoxide concentration. The calculated values of the separation selectivity indicate that these materials could have potential applications in the separation of these mixed liquid solvents. Molecular dynamics simulations performed for a representative adsorbed mixture have revealed a substantial slowing down of the dynamics under confinement, particularly in the case of the hydrogen bonds formed between water and dimethyl sulfoxide.

Spatial distribution and environmental/biological co-regulation mechanism of dimethyl sulfur compounds in the eastern Indian Ocean

Dimethyl sulfur compounds including dimethylsulfoniopropionate (DMSP), dimethyl sulfide (DMS), and dimethyl sulfoxide (DMSO), play a crucial part in global sulfur cycling. The eastern Indian Ocean (EIO), characterized by its remarkable diversity of biomes and climate dynamics, is integral to global climate regulation. However, the regulation mechanism of DMS (P, O) in the EIO remains to be elucidated in detail. This paper presented a field survey aimed at investigating the spatial distribution of DMS (P, O) and their relationships with environmental and biological factors in the EIO. The surface concentrations of DMS, DMSPt, and DMSOt varied from 0.07 to 7.37 nmol/L, 0.14 to 9.17 nmol/L, and 0.15 to 3.32 nmol/L, respectively, and their distributions are attributed to high Chl-a concentration near Sri Lanka and the influence of ocean currents (Wyrtki jets, Bay of Bengal runoff). Higher concentrations of DMS (P) and DMSOt were predominantly observed in water columns shallower than 75m and deeper than 75m deep, respectively. The monthly DMS fluxes in the study area peaked in August. Temperature and Dissolved Silica Index (DSI) were the key environmental determinants for DMS distribution, while nitrate (NO3-) was the primary factor for both DMSPt and DMSOt. In terms of biological factors, Prochlorococcus and Synechococcus were significant contributors to DMS (P, O) dynamics. Synechococcus was the dominant influence on the DMS source and DMSPt sink, whereas Prochlorococcus primarily consumed DMSOt. Furthermore, the structural equation modeling (SEM) revealed the relationship between DMS, DMSPt, DMSOt, and the key environmental/biological factors, as well as among them, and together they formed a co-regulatory network in the EIO. This contributes significantly to the advancement of global ecosystem models for DMS (P, O).

Synergistic effects of dimethyl sulfoxide-treatment and aramid nanofiber addition on performance enhancement of the PEDOT: PSS-based supercapacitor

Charge storage performance of the poly (3,4-ethylenedioxythiophene): poly (styrene sulfonate) (PEDOT: PSS, PH1000)-based supercapacitor is greatly enhanced by dimethyl sulfoxide (DMSO)-treatment and addition of aramid nanofibers (ANFs), but the underlying mechanism is unclear. To reveal it, we synthesized the films of PH1000, DMSO-treated PH1000 (D-P) and DMSO-treated PH1000-20 wt%ANF (D-PA) to construct the in-plane supercapacitors. A comparative study of electrochemical performance was firstly conducted to identify the specific contribution of DMSO-treatment and ANF components. Electrochemical impedance spectroscopy (EIS) was then analyzed, and the results demonstrated that the reduction of the ohmic resistance of the device was mainly attributed to the DMSO-treatment, while the addition of ANFs was found to contribute more to the decrease of Warburg resistance. The effects of DMSO-treatment and ANF components on the electrical propertíe and microstructure of PH1000 film were analyzed based on the square resistance results and AFM/SEM images, respectively. Dynamic permeation processes of the hydrogel electrolyte on the films were further recorded, vividly showing that the electrolyte permeability is highly dependent on the microstructure of the film. Through these analyses, a deep insight into the synergistic effects of DMSO-treatment and ANF addition on the electrochemical performance of the PH1000-based supercapacitor has been reached.

Electrochemical and Theoretical Modelled Reduction of β‐Diketone Inspired Chalcones

AbstractThe growing interest in synthesizing electrochemically active organic ligands stems from extensive reports highlighting the applications of redox‐active organic molecules. These molecules play a crucial role in capturing and converting CO2 into valuable organic compounds, including carbonates used as solvents in lithium batteries. In this study, we present an electrochemical investigation of two chalcone derivatives, referred to as (1) and (2). We explored the influence of different solvent systems, specifically acetonitrile and dimethyl sulfoxide, on the reduction potential of these chalcones. The reported chalcone derivatives were characterized using various analytical techniques, including UV/Visible spectroscopy, Fourier Transform Infrared spectroscopy, Proton and Carbon‐13 nuclear magnetic resonance, as well as mass spectrometry. The characterization of the reported chalcones, exhibiting properties of both β‐diketones and 2‐hydroxyphenones, is underscored by a density functional theory (DFT) study of chalcones (1) and (2). This research establishes a correlation between the energies calculated through DFT and the experimental reduction potentials of chalcones (1) and (2), in comparing them with a series of β‐diketones and 2‐hydroxyphenones.

[Study on the inhibitory and pro-apoptotic effects of different concentrations of total tanshinone alone and in combination with tyrosine kinase inhibitors on human myeloid leukemia cell lines].

Objective: To explore the effect and investigate the molecular mechanism of different concentrations of total tanshinones alone and in combination with tyrosine kinase inhibitors (TKIs) on the proliferation inhibition and apoptosis of human myeloid leukemia cell lines. Methods: K562 and Kasumi-1 cell lines were purchased from the Shanghai Cell Bank of the Chinese Academy of Sciences, and the TKIs-resistant strain K562/T315I cell line was constructed in Molecular Medicine Research Center, Beijing Lu Daopei Institute of Hematology. Logarithmic growth phase cells were taken and divided into intervention groups with total tanshinone of 0, 2.19, 4.38, 8.75, 17.50 and 35.00 μg/ml intervention groups, which were inoculated in 96-well plates at a density of 1×104 cells/well and exposed to the drug for 24 h, and a control group treated with dimethyl sulfoxide was also set up simultaneously. All experiments were repeated independently 3-5 times. The proliferative activity of the cells was assessed using the CCK-8 assay, the apoptotic rates were measured by flow cytometry, and the expression levels of apoptosis-regulating proteins Bcl-2 and Bax were analyzed by Western blotting. The cell lines treated and untreated with total tanshinone were subjected to transcriptome sequencing and gene set enrichment analysis to identify differentially expressed genes. Results: The half-inhibitory concentration (IC50) values of 8.75 μg/ml total tanshinone at 24 h for K562, K562/T315I and Kasumi-1 cells were (4.11±0.02), (4.95±0.04) and (3.98±0.01) μg/ml, respectively. When combined with 0.25 μmol/L imatinib, 8.75 μg/ml total tanshinone could enhance the induction of apoptosis effects on K562 and K562/T315I cell lines. After being treated with 4.38, 8.75, and 17.50 μg/ml of total tanshinone for 24 h, compared with the control group, total tanshinone upregulated the expression level of Bax protein, downregulated the expression level of Bcl-2 protein, and decreased the Bcl-2/Bax ratio (all P<0.05). Total tanshinone inhibited the proliferation-related signaling pathway and DNA damage repair pathway of myeloid leukemia cell lines, and activated the signaling pathway that induces apoptosis in leukemia cells. Conclusion: Different concentrations of total tanshinoneinhibites proliferation and promote apoptosis in K562, Kasumi-1 and TKIs-resistant K562/T315I cell lines, and further enhance the anti-leukemic effect when combined with TKIs.

Iodine-mediated substitution of terminal ligands in [{M6I8}I6]2– (M = Mo, W) by DMSO

The family of octahedral iodide cluster complexes of molybdenum and tungsten – [{M6I8}L6]n – exhibit a unique set of properties with significant practical potential. Due to the strong influence of terminal ligands L on these properties, the search for new simpler, more convenient and cheaper approaches for their substitution is an urgent task. This work demonstrates a new one-step method for terminal ligand substitution using well-known and readily available complexes [{M6I8}I6]2–. The synthetic technique involves the addition of molecular iodine to the reaction mixture in order to bind the released I– ions, thereby facilitating the reaction process. As a result, two new cluster complexes with dimethyl sulfoxide ligands [{M6I8}(DMSO)6](I3)4 (M = Mo (1), W (2)) have been obtained and structurally characterized. The optical properties of the obtained compounds have been studied both in solid state and in solution, and Eg values have been calculated from the solid-state absorption spectra. The presence of I3– anions has been shown to quench the emission of the cluster complexes, explaining the absence of luminescence in the obtained compounds.

Research on triamterene equilibrium solubility in mono-solvents and aqueous solutions according to solvent effect, models, thermodynamic analysis and quantum chemical calculation

The equilibrium solubilities of triamterene in pure solvents {isopropanol, methanol, n-propanol, water, 1,2-dichloroethane, 2-methoxyethanol, ethyl acetate, acetonitrile, N-methylformamide (NMF), n-butanol, isobutanol and dimethylsulfoxide (DMSO)}, as well as solvent mixtures of methanol/DMSO + water, were determined by dint of the saturation shake-flask technique. Triamterene solubility (105x) rose as the determination temperature rose and fell in the order at 298.15 K: 2-methoxyethanol (453.9) > DMSO (281.3) > NMF (142.6) > methanol (8.424) > n-propanol (1.432) > n-butanol (1.152) > ethyl acetate (0.9441) > isobutanol (0.8738) > acetonitrile (0.7991) > isopropanol (0.7419) > 1,2-dichloroethane (0.5232) > water (0.1795). No crystal transition or solvation in the trial process was shown via X -ray power diffraction patterns. The solvent effects, in which the interactions of solvent–solvent and solvent–solute were considered, were studied via linear solvation energy relationship. Using equations such as Wilson, Apelblat, λh, and NRTL for mono-solvents and Jouyban-Acree as well as modified van't Hoff-Jouyban-Acree for solvent mixtures, the magnitudes of equilibrium solubility were associated. The greatest relative average deviation of 5.787 × 10−2 and the maximum deviation value of root mean square of 219.1 × 10−4 were computed for neat solvents. According to the solubility information in pure solvents, the Wilson equation was used to compute the mixing solution parameters. At 298.15 K, the inverse Kirkwood-Buff integral was utilized here to examine the preferred solvation of triamterene. In blends of DMSO/methanol + water with middle and rich DMSO/methanol compositions, the parameters of preferred solvation for DMSO/methanol were positive, indicating the preferential solvation of triamterene by DMSO/methanol. In addition, the electrostatic acidity-basicity properties were demonstrated using the lowest negative electrostatic potential in company with the minimum m local ionization energy of molecular surface. The N in ring of the triamterene is the preferential target for electrophilic assault; and –NH2 of the triamterene, for nucleophilic assault. The weak triamterene-solvent interactions were graphically displayed by the use of the independent gradient approach on the basis of Hirshfeld partition analysis.

Genetically dissecting the electron transport chain of a soil bacterium reveals a generalizable mechanism for biological phenazine-1-carboxylic acid oxidation.

The capacity for bacterial extracellular electron transfer via secreted metabolites is widespread in natural, clinical, and industrial environments. Recently, we discovered biological oxidation of phenazine-1-carboxylic acid (PCA), the first example of biological regeneration of a naturally produced extracellular electron shuttle. However, it remained unclear how PCA oxidation was catalyzed. Here, we report the mechanism, which we uncovered by genetically perturbing the branched electron transport chain (ETC) of the soil isolate Citrobacter portucalensis MBL. Biological PCA oxidation is coupled to anaerobic respiration with nitrate, fumarate, dimethyl sulfoxide, or trimethylamine-N-oxide as terminal electron acceptors. Genetically inactivating the catalytic subunits for all redundant complexes for a given terminal electron acceptor abolishes PCA oxidation. In the absence of quinones, PCA can still donate electrons to certain terminal reductases, albeit much less efficiently. In C. portucalensis MBL, PCA oxidation is largely driven by flux through the ETC, which suggests a generalizable mechanism that may be employed by any anaerobically respiring bacterium with an accessible cytoplasmic membrane. This model is supported by analogous genetic experiments during nitrate respiration by Pseudomonas aeruginosa.

Solvatochromism and preferential solvation of 2,6-dichloro-4-nitroaniline in pure and binary aqueous mixtures

In this study, the solvatochromic behavior of 2,6-dichloro para-nitroaniline (DCPNA) was investigated in a wide range of pure solvents, and binary solvent mixtures of water with ethanol, dimethyl sulfoxide, and dimethyl formamide at 298.15 K. The absorption spectrum of DCPNA in the ultraviolet–visible range exhibits a characteristic peak that shifts with changes in the solvent along the absorption wavelength. The influential factors and their roles in solvatochromism were determined through KAT-LSER analysis in pure solvents. Solvatochromism in binary solvent mixtures showed a completely non-linear trend with respect to the composition of the solution. The recently introduced preferential solvation model was utilized to model the absorbed light wavenumber in aqueous solvent mixtures. This model elucidates the separate effects of preferential solvation of DCPNA and the non-ideal behavior of aqueous solvent mixtures in the non-linearity of solvatochromism.

A Luminescent Hybrid Bimetallic Halide Family with Solvent‐Coordinated Rare Earth and Alkaline Earth Metals

Hybrid metal halides are an extraordinary class of optoelectronic materials with extensive applications. To further diversify and study the in‐depth structure‐property relations, we report here a new family of 21 zero‐dimensional hybrid bimetallic chlorides with the general formula A(L)n[BClm] (A = rare earth (RE), alkaline earth metals and Mn; L = solvent ligand; and B = Sb, Bi and Te). The Ln(DMSO)8[BCl6] (Ln = La, Ce, Sm, Eu, Tb, and Dy; DMSO = dimethyl sulfoxide) series shows broadband emission attributed to triplet radiative recombination from Sb and Bi, incorporating the characteristic emission of RE metals, where Eu(DMSO)8[BiCl6] shows a staggering PL quantum yield of 94%. The pseudo‐octahedral [SbCl5] with Cl vacancy in AII(DMSO)6[SbCl5] (AII = Mg, Ca and Mn) and the square pyramidal [SbCl5] in AII(TMSO)6[SbCl5] (TMSO = tetramethylene sulfoxide) enhance the stereoactive expression of the 5s2 lone pairs of Sb3+, giving rise to the observation of dual‐band emission of singlet and triplet emission, respectively. A series of Te(IV) analogues have been characterized, showing blue‐light‐excitable single‐band emission. This work expands the materials space for hybrid bimetallic halides with an emphasis on harnessing the RE elements and provides important insights into designing new emitters and regulating their properties.

A Luminescent Hybrid Bimetallic Halide Family with Solvent-Coordinated Rare Earth and Alkaline Earth Metals.

Hybrid metal halides are an extraordinary class of optoelectronic materials with extensive applications. To further diversify and study the in-depth structure-property relations, we report here a new family of 21 zero-dimensional hybrid bimetallic chlorides with the general formula A(L)n[BClm] (A = rare earth (RE), alkaline earth metals and Mn; L = solvent ligand; and B = Sb, Bi and Te). The Ln(DMSO)8[BCl6] (Ln = La, Ce, Sm, Eu, Tb, and Dy; DMSO = dimethyl sulfoxide) series shows broadband emission attributed to triplet radiative recombination from Sb and Bi, incorporating the characteristic emission of RE metals, where Eu(DMSO)8[BiCl6] shows a staggering PL quantum yield of 94%. The pseudo-octahedral [SbCl5] with Cl vacancy in AII(DMSO)6[SbCl5] (AII = Mg, Ca and Mn) and the square pyramidal [SbCl5] in AII(TMSO)6[SbCl5] (TMSO = tetramethylene sulfoxide) enhance the stereoactive expression of the 5s2 lone pairs of Sb3+, giving rise to the observation of dual-band emission of singlet and triplet emission, respectively. A series of Te(IV) analogues have been characterized, showing blue-light-excitable single-band emission. This work expands the materials space for hybrid bimetallic halides with an emphasis on harnessing the RE elements and provides important insights into designing new emitters and regulating their properties.

A copper- and amine-free sonogashira reaction catalyzed by a supported bis(oxime palladacycle) on magnetized SBA-15

The recently reported magnetic catalyst, Fe3O4@SBA-bis(oxime palladacycle), was incorporated in the Sonogashira reaction. The potential catalytic activity of the catalyst was evaluated by optimizing the reaction conditions. It was discovered that using dimethylsulfoxide (DMSO) as a solvent, a catalyst loading of 0.25 mol% palladium, Cs2CO3 as a base, and a reaction temperature of 120 °C resulted in the highest yields. The catalyst showed excellent activity with a wide range of aryl halides and aryl acetylenes in the Sonogashira reaction. The use of a low catalyst loading further highlighted its efficiency. Moreover, the catalyst demonstrated noteworthy reusability by consistently preserving its activity and stability through seven successive runs. The magnetic properties of the catalyst allowed for easy separation and recovery.